Used Ixsa Ixsa X6 Sweeper, 5000 Charging Cycles for sale (10,968)

Condition: good (used), Year of construction: 1986, turning diameter: 1,320 mm, swing diameter over cross slide: 1,250 mm, Swing diameter: 1,320 mm Turning length: 5,000 mm Faceplate diameter: 1,250 mm Workpiece weight: 14 t Swing diameter over support: 900 - 950 mm Total power requirement: 45 kW Hodpfjy Ukwcjx Amgjn Machine weight approx.: 18 t

Condition: used, Technical details: suction stud diamter: 380 mm filter surface area: 610 x 660 + 560 x 470 + 570 x 470 mm total power requirement: 4,0 kW dimensions L x W x H: 0,6 x 1,1 x 2,2 mm Hedeu Nwwdjpfx Amgsn - 2x suction nozzles at the bottom left/right: Ø 300 x 200 / Ø 200 x 170mm - exhaust air outlet W x H: 280 x 145mm - 3 pieces slide-in filters - with wall fixation *

Condition: used, Year of construction: 2004, Technical details: turning diameter over bed: 850 mm turning dia. over face-slide: 580 mm turning length: 4000 mm centre distance: 4000 mm faceplate diameter: 800 mm control: Siemens 810D revolution per minute: 1 - 1600 / 2 step U/min max. torque on the spindle: 6000 Nm feed motor: X= plan + Z= längs: 16000 / 20000 N rapid motion - x-axis: 4 m/min rapid motion - y-axis: 7 m/min spindle passage: 130 (Spindelkopf DIN 55027 Gr. 11) mm operating hours - idle run: werden noch ausgelesen h tailstock taper ISO: MK 6 tailstock quill stroke: 350 mm max. workpiece weight between centers: 5000 kg max. workpiece weight -without tailstock: 1800 kg interface: RS 232 / V24 voltage: 400 V / 50Hz V control voltage: 24 V Gleichstrom V total power requirement: ca. 52 kW Weight approx.: 14,0 t dimension machine xH: 2,6 x 9,1 x 2,5 m Cycle lathe with Siemens cycle control Motor: 37kW, rated speed 1500 rpm; max. speed 6500 rpm; torque 235 Nm Two gear shift stages Hedpfx Aeu Ix Izsmgjn Stage II: Spindle torque 258.9 to 1364.6 Nm Stage I: Spindle torque 1050.4 - 5536.1 Nm Feed drive Three-phase servo drive 2x chip conveyor Double E-cabinet Quick-change steel holder parat Coolant device incl. various accessories see photo, as well as steady rest and 3-jaw chuck Ø 500mm Rota-S plus *

Condition: used, Year of construction: 2014, Technical details: turning diameter over bed: 660 mm turning dia. over face-slide: 460 mm turning length: 1650 mm centre distance: ca. 2200 mm swing over bed: 660 mm swing diameter over slide rest: 460 mm swing diameter: in Kröpfung: 960 mm centre height: 320 mm control: Siemens 828 D ShopTurn x-axis: ca. 350 (plan) mm spindle bore: Ø 105 mm range of revolution per miute: 26-224 / 225-670 / 671-2.000 stufenlos U/min feed continuous: X: 0,5 - 3.000 mm/min feed continuous: Z: 1 - 3.000 rapid traverse x + z axis: 6 m/min tailstock taper MT: MK 6 quill stroke: 300 mm total power requirement: ca. 23 kW dimension machine xH: 4,2 x 2,3 x 2,3 m dimension swarf conveyor LxWxH: 2,3 x 1,7 x 1,3 m Chip conveyor includes cooling water tank with pump 3-speed manual gearbox with electronic gear shifting Tool holder according to/with Silent Tool Technology equipped (Capto C6) Manual control unit Hjdpfxju Ix Nro Amgon Foot switch Control panel Hydraulics automatic door closing (pneumatic) Accessories see comparable in the photo. *

Condition: used, Year of construction: 1998, Technical details: turning diameter over bed: 600 mm Hjdpfew Rkt Ijx Amgjn turning diameter over support: 400 mm turning length: 2000 mm center height over support: 300 mm centre distance: 1600 mm revolution per minute: 3 - 2.500 U/min tailstock taper MT: MK 5 spindle bore of work spindle: 62 mm quill stroke: 190 mm longitudinal feeds:: ca.0,001-10 einstellbar mm/U cross feed: ca. 0,001-5 einstellbar mm/U Rapid feed X axis: bis zu 5000 m/min. total power requirement: 40 KVA weight of the machine ca.: 5,6 t dimension machine xH: 4,0 x 2,0 x 1,9 m incl. accessories see picture *

Condition: used, Technical details: Hodpfewc R Udox Amgon welding current: 520 A Length: 1200 mm height: 1100 mm weight of the machine approx.: 147 kg dimensions L x W x H: 1,2 x 0,75 x1,1 m Welding process TIG/E/MIG-MAG Delivery consists of: Welding transformer, feed unit, cooling unit Protection class IP23C Insulation class B/H *

Condition: good (used), Working area Maximum turning diameter 400 mm Maximum turning length 5000 mm Hedpfx Amjy Ug U Djgjn Swinging diameter over bed 840 mm Swinging diameter over carriage 530 mm Spindle speed 14.6 – 1250 rpm Drive power 18.5 kW Dimensions 8.0 × 1.9 × 1.7 m Weight approx. 6.3 – 8.2 t

Condition: used, Year of construction: 2003, Machine hours: 1,594 h Technical specifications: Swing over bed: 320 mm Swing over face: 150 mm Clamping width, approx.: 800 mm Lathe chuck: 200 mm Hsdpewlhn Hsfx Amgen Lathe spindle size: 6 Spindle mount: MT 6 Speed range: 14 - 3,550 rpm Cross travel: 185 mm Spindle bore: 52 mm Quill: 70 mm Quill mount: MT 5 Quill stroke: 120 mm Max. torque: 32 Nm Gear ratios: 2 Drive power: 7 kW Multifix tool carrier: size B Dimensions (L x W), approx.: 2,600 x 1,440 x 1,800 mm Weight, approx.: 1,500 kg Control system: SINUMERIK 810DE-L CCU0 (Cycles for taper turning and thread machining

Condition: used, Year of construction: 2017, functionality: fully functional, overall weight: 620 kg, color: orange, Equipment: power take-off driven, Dücker FKM 2400 Sweeper Hjdey Ux A Tspfx Amgon Year of manufacture: 2017 620 kg Max. speed: 250/min Max. hydraulic pressure: 200 bar PTO drive Lighting Three-point linkage Suitable for Unimog, for example

Condition: used, Year of construction: 2006, control Heidenhain Hsdpfx Amey T Scdegjn greates pass round over bed 280 mm swing diameter over face slide 140 mm centre distance 500 mm x-axis 200 mm spindle tunring speed 10 - 5.000 U/min In our estimation, the machine is in good used condition and can be inspected under power by appointment. Accessories, as well as the tools and clamping devices shown in the images, are included in the scope of delivery only if explicitly noted in the additional information. Subject to changes, errors in technical data and specifications, and prior sale!

Condition: like new (used), Year of construction: 2010, functionality: fully functional, * Mori Seiki NMV 5000 DCG. * Year 2008. * Value of optional equipment including zero-point clamping systems, chucks, BT tool holders, turning tool holders, and 50-55,000 euro pallets. * 5-axis continuous machining center. * High-precision Heidenhain linear scales. * Interface for connecting a pallet loader and robot. * Table with turning function. * Independent high-pressure coolant system at 40 bar. * Spindle oil cooling system. * BT 40 tool magazine. * Tool magazine capacity: 60 tools. * Maximum tool diameter: 125 mm. * Maximum tool length: 300 mm. * Maximum tool weight: 8 kg. * X-axis travel: 730 mm. * Y-axis travel: 510 mm. * Z-axis travel: 510 mm. * Table with turning function. * Maximum workpiece diameter in turning mode: 450 mm. * Maximum turning diameter in turning mode: 700 mm. * Mori Seiki Mapps 4 conversational control. * Spindle speed: 20,000 rpm. * Spindle motor power: 18.5 / 15 kW * Maximum cutting torque: 135 Nm. * Table on C-axis: 360,000 x 0.001 * Rotation on B-axis: +160 / -180 * Rapid traverse X/Y/Z: 50 / 50 / 50 m/min * Renishaw tool measurement system. * Renishaw workpiece measurement system. * Automatic zero-point setting. * Automatic cutting power control. * Program memory: 2 MB * Dynamic zero-point correction (up to 8 points). * Tool availability check. * Custom macro (999 variables). * Rear chip conveyor. * Tool life management (128 x 2 groups). * Electrical transformer. * Documentation, parts list, electrical diagrams, programming, and instruction manual. * Weight: 13,500 kg. * Machine currently in operation. Hjdpfxjy Tt Rce Amgon * Available for inspection by an authorized Mori Seiki technician. * Immediate delivery, subject to immediate sale.

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, For sale: this lathe. General overhaul completed in 2009. Swing diameter over bed: 1,000 mm Turning length: 5,000 mm Siemens Sinumerik 840D The machine is currently finishing a job and will be available at the end of January 2026. Hedpfx Amoxxvqasgjn

Condition: used, Year of construction: 2000, centre height 400 mm centre distance 3.000 mm max. swing over bed 810 mm max. swing over facing slide 510 mm max. swing-dia. in gap 850 mm control WEILER max. workpiece weight 3.800 kg spindle diameter in front bearing 150 mm spindle bore 106 mm faceplate diameter 630 mm worktool system Parat tailstock quill taper MT 6 dia. of quill 115 mm spindle turning speed range 1 - 1.800 U/min Lathe - cycle-controlled | WEILER - E80 x 3000 equipped with 630mm faceplate, 400mm SCHUNK ROTA-S plus chuck, boring bar attachment, PARAT tool system as well as a chip conveyor. A comprehensive tool package is included in the scope of delivery. The machine video from the production plant will be shared on request. The machine is in good condition and can be inspected under power at any time. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: E-80 | E 80 | E80 x 3000 | E80x3000 | E 80 x 3000 Hedpfsy Ty Ihsx Amgjn

Condition: used, Year of construction: 1997, turning length 1500 mm greates pass round over bed 490 mm turning dia. over face-slide 280 mm control Heidenhain Manual Plus Speed range - up to 3000 U/min spindle bore 65 mm power capacity - workpiece power 12/16 (100/60%) kW weight of the machine ca. 3,5 t Equipment/Accessories: Hodpfsy Ty Egjx Amgon - Steady rest - Chuck - Tool holders - Drill bits - Tips - Multifix holder

Condition: good (used), mileage: 565,342 km, power: 340 kW (462.27 HP), first registration: 02/2016, fuel type: diesel, axle configuration: 10x4, wheelbase: 7,620 mm, fuel: diesel, fuel tank capacity: 500 l, color: yellow, driver cabin: day cab, emission class: euro6, total length: 10,500 mm, total width: 2,550 mm, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 10,000 kg, permissible axle load (axle 3): 7,000 kg, Year of construction: 2016, Equipment: AdBlue, crane, = Additional options and accessories = - PTO = Further information = Technical information Number of cylinders: 6 Engine displacement: 12,902 cc Axle configuration Front axle 1: Max. axle load: 10,000 kg Front axle 2: Max. axle load: 10,000 kg Rear axle 1: Lifting axle; Max. axle load: 7,000 kg Rear axle 2: Max. axle load: 11,500 kg Rear axle 3: Max. axle load: 11,500 kg Weights Unladen weight: 20,750 kg Payload: 31,250 kg GVW: 52,000 kg Functional Crane: PALFINGER-EPSILON Q 180, year of manufacture 2015, behind the cab Body manufacturer: PALFINGER HAAKARM T 30 Pump: Yes Condition Hedjyk Dkajpfx Amgjn Technical condition: good Optical condition: good Identification Registration number: 64-BGX-9

Condition: used, Year of construction: 1998, 🧰 Product Features • Condition: used • Color: orange, black • Type: LKM • Year of manufacture: 1998 • Dimensions: 330 x 190 x 190 cm • Sweeping attachment: for Multicar vehicle 💰 Price: €2,590 net excl. VAT • Volume discount: on request • Shipping costs: Europe-wide on request • Delivery time: Immediately available • Inspection and collection: possible anytime by appointment Hedpfswqfmksx Amgsn Always over 5,000 linear meters of pallet racking from various manufacturers in stock (Changes and errors in technical data, information, and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT ex stock.)

Condition: used, Year of construction: 2008, mileage: 317,000 km, power: 265 kW (360.30 HP), first registration: 09/2012, overall weight: 26,000 kg, fuel type: diesel, color: orange, axle configuration: 6x4, maximum load weight: 11,380 kg, empty load weight: 14,620 kg, tire size: 295/80R22.5, wheelbase: 4,200 mm, brakes: constant throttle, driver cabin: day cab, gearing type: automatic, emission class: euro5, suspension: steel, number of seats: 3, Equipment: ABS, additional headlights, air conditioning, cabin, cruise control, differential lock, fog lights, low noise, onboard computer, power assisted steering, seat heater, traction control, Vehicle location: en route / in transit, delivery condition, sprung seat, double bench seat, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, sun visor, cruise control, air horn, ABS (anti-lock braking system), traction control system (ASR), constant throttle, auxiliary drive, automatic transmission, differential lock, work lights, rotating beacon, storage compartment, leaf spring suspension, side aluminum underride protection, sunroof, green environmental badge. Wheelbase: 4200 mm, Body: Tollense suction tanker body type TE2-3601, approx. 13 m³ (year of construction 2012), 7.5t front axle, H7 13t rear axle, bevel gear 300, disc brake on front and rear axles, Telligent braking system with ABS and ASR, stabilizer rear axle, steel bumper, front underrun protection, distributor cockpit, Mercedes PowerShift, pollen filter, reversing warning, On-Board Diagnosis 2. Year of construction 2008! Rotec vacuum pump TEC 200 DVL! All information is provided without guarantee as the vehicle is currently en route! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale and errors! Hodpfey T Sfxex Amgsn

Condition: used, operating hours: 6,202 h, mileage: 67,279 km, power: 62 kW (84.30 HP), first registration: 03/2020, overall weight: 3,500 kg, fuel type: diesel, color: yellow, axle configuration: 4x2, maximum load weight: 690 kg, empty load weight: 2,810 kg, wheelbase: 1,600 mm, brakes: other, driver cabin: other, gearing type: other, emission class: euro6, number of seats: 2, Equipment: additional headlights, air conditioning, cabin, onboard computer, parking sensors, power assisted steering, soot filter, * German vehicle * 1st owner * Only 6,202 operating hours * Original 67,279 km * Condition, see photos * 2 front sweepers, 700mm wide * Extension device * Sweeping width up to 2,300-3,020mm * Overall width 1320mm * Working speed 0-16 km/h * Sweeping debris container 1.8m³ * Water system 400 liters * Sweeping drive, hydrostatic * Ideal for sidewalks, pedestrian zones and bike paths, narrow streets, etc. * 2-person full comfort cabin * Air conditioning * Heated panoramic windshield * Comfort suspension seat * Rear view camera * Ergonomic arrangement of all controls * Radio Bluetooth MP3 * LED daytime running lights * All-round warning lights * 4-cylinder diesel engine, Euro 6 * Emission standard EU6 * Self-propelled working machine, street sweeper * Wheelbase: 1,600mm * Gross vehicle weight: 3,500 kg * Unladen weight: 2,810 kg * 50 km/h approval * Green license plate If a new TÜV (technical inspection) is desired, we will gladly provide you with a quote from our partner workshops. Our offer is generally WITHOUT a new TÜV inspection, without a new DGUV (German Social Accident Insurance) certificate, without a new SP (safety report), without a new UVV (accident prevention regulations) certificate. You can find more trucks on our website at: Hodpfxoy Tplpj Amgen We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend an inspection and examination of the goods so that no false impressions arise in the buyer regarding the condition and suitability. Inspections and examinations are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently verify the condition and equipment of the goods/vehicles. Subject to changes, prior sale and errors.

Condition: used, Year of construction: 2003, Technical details: turning diameter: 720 mm turning length: 2000 mm control: 4110 total power requirement: 40 kW weight of the machine ca.: 6 t dimensions of the machine ca.: 4,5 x 2,3 x 1,9 m turning length: 2000 mm centre height: 345 mm internal taper -metric: 100 mm spindle bore: 92 mm tailstock-quill taper dia.: 100 mm turning diameter over bed: 720 mm Hodpfxey Tnaxs Amgon

Condition: used, Year of construction: 2015, bed width 350 mm turning length 1.000 mm control Manual plus 620 Heidenhain greates pass round over bed 430 mm Swing dia. over traverse guideway 220 mm turning speed range - main spindle 1 - 3.600 min/-1 power capacity - main spindel 9 / 11 kW max. Torque ca. 200 Nm spindle head DIN 55027 / 6 spindle diameter in front bearing 110 mm spindle bore 80 mm usable bar diameter max. 80 mm System MultiFix Shank diameter 20 x 20 mm x-axis 230 mm z-axis ca. 1.000 mm diameter of quill 70 mm quill stroke 150 mm taper of center MK 5 hollow fix: 12 -150 mm hollow var: 12 -125 mm rapid traverse X: 10 / Z: 7 m/min feed power X: 4 / Z: 5 kN weight of the machine ca. 3,2 t dimensions of the machine ca. 2,8 x 2,1 x 1,9 m Lathe cycle controled SEIGER - SLZ 420 E / 1000 - WITHOUT three-jaw chuck - Impulse lubrication Hjdpfjyvkr Ajx Amgen Flow rate: 0.1 l/min, Pump pressure: 30 bar, Tank capacity: 2 dm³

Year of construction: 2017, condition: used, machine/vehicle number: AT102, Used Tetra pak Sterilizer UHT 5000 LPHTechnical Specifications & Performance DataThis UHT Sterilization System Steritherm is designed for high-throughput thermal processing of liquid foods and beverages, delivering consistent ultra-high-temperature treatment for aseptic downstream packaging. Manufactured by Tetra Pak engineering, the unit offers dependable performance for beverage production and industrial packaging environments where hygiene and reliability are critical.Manufacturer: Tetra PakModel: VTIS-C4 SterithermManufacturing year: 2017Process capacity: 5000 L/hSystem configuration: UHT system with homogenization, heat exchange, pump station, CIP regulator, and computer controlHomogenizer: SHL-20, max pressure 250 bar, capacity aligned to 5000 L/hPlate heat exchanger: H7-RC, volume 198 L, max working pressure 10 bar(g), max working temperature 140 °C, test pressure 13 bar(g)Pump station: sanitary centrifugal pumps including LKH-10 (2018) and LKH-107, plus NM038 monopumpRated operating envelope: high-temperature operation up to approximately 148 °C with vacuum and overpressure capability (application dependent)Electrical frequency: 50 HzAdvanced Automation & Control SystemsThe system includes an integrated computer control platform for precise process management. Automated temperature, flow, and holding-time control help ensure repeatable UHT performance across batches. A dedicated CIP regulator supports automated cleaning sequences, reducing downtime and enhancing food safety. The control interface facilitates recipe management, alarm handling, and trend visualization to support consistent quality and efficient operations.Computerized process control for UHT parametersAutomated CIP regulationProcess monitoring with configurable setpoints and alarmsDesigned for quick startup and stable thermal profilesProduction Line Integration CapabilitiesThis second hand UHT unit integrates seamlessly with upstream raw product handling and downstream aseptic tanks or fillers. It is suitable for standalone operation or as part of a used bottling line for beverage production. With a capacity of 5000 L/h, it supports medium-scale throughput and can be configured to match a range of product viscosities and process requirements.Inline or standalone operation modesInterfaces for feed, recirculation, and product dischargeCompatible with aseptic storage and filling systemsSuitable for dairy-based drinks, juice, and other liquid foodsMachine Condition & Maintenance HistoryThis is a second hand UHT system offered in working condition and ready for operation, reflecting an industrial design focused on long service life. The pump station includes a 2018 sanitary centrifugal pump as part of the configuration, indicating modernized components within the system. Overall, the unit presents as a robust processing asset for facilities seeking reliable thermal treatment without the lead ti... Hodpfx Amey Ut Nhogjn

Condition: used, Year of construction: 2022, Sweepers Mast type: None Battery voltage: 12V Battery Ah: 85Ah Description: Scrubbing performance approx. 1750 m²/h Speed: 3.5 km/h Working width: 500 mm Squeegee width: 730 mm 1 round polypropylene brush 40 l fresh water tank 45 l dirty water tank 2 batteries: 24 V / 2 x 12 V Integrated charger Weight: 99 kg Dimensions: Length: 821 mm, Width: 576 mm, Height: 1220 mm Adjustable handle Hodpfx Amsx Sa E Dogsn

Condition: refurbished (used), Year of construction: 2018, operating hours: 332 h, functionality: fully functional, working width: 1,450 mm, battery voltage: 24 V, area performance: 8,700 m²/h, The Kärcher KM 105/110 R Bp Pack is from the year 2018 and has only 332 operating hours. It has been completely overhauled by us, with each component being checked for functionality and cleaned. Four new, maintenance-free gel batteries are installed, which can be conveniently charged using the integrated charger. The machine has two new side brushes, a new sickle-type side brush, and a new main sweeping roller. Two new flat-fold filters are mounted, which are automatically cleaned during sweeping. For easy emptying of the coarse dirt container, the machine has a hydraulic high-dump function, which can be operated entirely from the driver's seat. An automatic adjustment of the main sweeping roller when it wears down simplifies maintenance work. The wheels are non-marking and are therefore also suitable for indoor use. Technical data: Hsdpey T Hzbjfx Amgon Working width with two side brushes: 1450 mm Area performance: 8700 m²/h Volume of sweeping container: 110 liters Weight: 610 kg

Condition: excellent (used), Year of construction: 2016, operating hours: 5,397 h, functionality: fully functional, first registration: 12/2016, overall weight: 4,000 kg, fuel type: diesel, color: white, axle configuration: 4x4, maximum load weight: 1,200 kg, empty load weight: 2,800 kg, fuel: diesel, brakes: engine braking, driver cabin: day cab, gearing type: hydrostat, emission class: euro6, suspension: steel, Equipment: ABS, additional headlights, air conditioning, all wheel drive, cruise control, electronic stability program (ESP), fog lights, hydraulics, An authorized SUBARU dealership in Łaziska Górne offers a compact JOHNSTON, now BUCHER JOHNSTON model C200 sweeper, sourced from Sweden from a company specializing in cleaning roads and large facilities. The machine is well-suited for work on sidewalks or in densely populated residential areas due to its small, compact dimensions. This sweeper comes from its first owner, who had over 20 units in their fleet, and all were serviced according to the manufacturer's recommendations. The machine is designed for maintaining the cleanliness of roads, sidewalks, parking lots, squares, urban areas, industrial plants, logistics centers, and municipal areas. The Johnston C201 is a highly regarded and proven suction sweeper, characterized by its compact dimensions, high maneuverability, and high work efficiency in urban environments. Cabin equipment: Radio Air conditioning Rearview camera Brand: Johnston Sweepers Model: C201 / C200 Year of manufacture: 2016 Serial number: 2000 / 207006 / 03 / 16 GVWR: 4000 kg Permissible total weight: 4750 kg Permissible front axle load: 1970 kg Permissible rear axle load: 2030 kg Certificate: PM10 Certified CE marking: Yes Noise level LWA: 103 dB Machine type: compact suction road sweeper Waste container capacity: 1.8 m³ Usable container capacity: approximately 1.5 m³ Fuel tank: 52 l Clean water tank: approximately 152–175 l, depending on the version Hjdpfjy U Nidex Amgon Water recirculation system: approximately 250 l Total water system capacity: approximately 402–425 l Drive: hydrostatic Sweeping working speed: 0–16 km/h Travel speed: up to 40/50 km/h, depending on the CN/CX version Theoretical sweeping performance: up to 36,800 m²/h Climbing ability: up to 30% Suction nozzle width: approximately 815 mm Brush diameter: approximately 850 mm Container discharge height: approximately 1545 mm DIMENSIONS: Overall length: approximately 4270 mm Overall width: approximately 1315 mm Overall height: approximately 1985 mm MACHINE DESCRIPTION: The Johnston C201 / C200 is a compact suction road sweeper that performs excellently in urban and municipal work. Thanks to its small dimensions, the machine is very maneuverable and can operate in places where larger sweepers have limited maneuvering capabilities. The machine is ideally suited for cleaning streets, sidewalks, bus bays, parking lots, maneuvering areas, industrial areas, residential areas, city centers, and private properties. The suction system, together with the side brushes, effectively collects sand, dust, leaves, small debris, and road dirt. A major advantage of this machine is its 4000 kg GVWR, which means a higher permissible total weight than in the 3.5-ton versions. The machine has a PM10 certificate, CE marking, and a Johnston Sweepers factory nameplate. APPLICATION: Maintaining the cleanliness of roads and streets Cleaning sidewalks and paths Municipal work Cleaning parking lots and squares Maintaining industrial areas Serving municipalities, cities, and municipal companies Work at logistics centers and production facilities Cleaning private and residential areas The stated price is net and applies to export and for companies. A significant discount is possible for individual customers. Please contact us directly by phone to get your best price.

Condition: used, Year of construction: 2013, mileage: 65,125 km, power: 62 kW (84.30 HP), first registration: 12/2013, overall weight: 3,500 kg, fuel type: diesel, color: orange, axle configuration: 4x2, maximum load weight: 650 kg, empty load weight: 2,850 kg, tire size: 215R14C, next inspection (TÜV): 06/2026, wheelbase: 1,820 mm, driver cabin: day cab, gearing type: automatic, emission class: euro5, suspension: steel, number of seats: 2, Equipment: additional headlights, air conditioning, cabin, cruise control, onboard computer, power assisted steering, Vehicle location: Bovenden, 1x air suspension seat, cruise control, automatic transmission, frame cover, high beam headlights, rotating beacon. Hodpsyatfxsfx Amgsn Wheelbase: 1820 mm Superstructure: compact sweeper, approx. 7,540 operating hours. Transport speed 50 km/h, mechanical chassis suspension, independent disc brush control, stainless steel suction tube, pressurized water circulation system. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale and errors excepted!