Used Jung Jf 520 for sale (3,632)

Condition: good (used), machine/vehicle number: 17493, Year of construction: 2023, operating hours: 1,182 h, load capacity: 1,600 kg, lifting height: 220 mm, load center: 600 mm, fuel type: electric, mast type: other, construction height: 1,300 mm, battery voltage: 24 V, fork length: 1,150 mm, overall weight: 375 kg, enginetype: Electric, manufacturer: Jungheinrich Serial Number: 98389329 Ledpfxe Adww No Amzohn Battery Details: 24V 2PzB 150Ah BJ:2023

Condition: used, machine/vehicle number: IC1545, Year of construction: 2021, operating hours: 7,720 h, load capacity: 2,200 kg, lifting height: 2,100 mm, fuel type: electric, mast type: simplex, construction height: 1,430 mm, fork length: 1,190 mm, front tire size: x, rear tire size: x, enginetype: Electric, manufacturer: Jungheinrich Serial Number: 98311220 Lsdpfxj Adxars Amzohn

Condition: used, machine/vehicle number: IC1549, Year of construction: 2021, operating hours: 1,437 h, load capacity: 2,200 kg, fuel type: electric, mast type: other, battery voltage: 24 V, enginetype: Electric, manufacturer: Jungheinrich Lhsdpj Adxa Sjfx Amzon Serial Number: 98310916 Battery Details: 24v 200ah

Condition: used, machine/vehicle number: IC1559, Year of construction: 2021, operating hours: 6,647 h, load capacity: 2,200 kg, lifting height: 2,100 mm, fuel type: electric, mast type: simplex, construction height: 1,430 mm, fork length: 1,190 mm, front tire size: x, rear tire size: x, enginetype: Electric, manufacturer: Jungheinrich Lhjds Adxbiepfx Amzon Serial Number: 98309954

Condition: used, machine/vehicle number: IC1539, Year of construction: 2021, operating hours: 2,452 h, load capacity: 1,600 kg, lifting height: 5,600 mm, fuel type: electric, mast type: triplex, construction height: 2,400 mm, Equipment: cabin, enginetype: Electric, manufacturer: Jungheinrich Lhjdpfx Aj Adw U Ismzjn Serial Number: 91654460

Condition: used, Year of construction: 2004, CNC lathe Gildemeister Type/Model CTX 520 linear Condition: Used Year of manufacture: 2004 Operating hours: 86,490 Spindle hours: 12,970 Technical data Working area max. turning diameter: 680 mm Turning diameter over X-axis: 565 mm Chuck diameter: 250/315 mm Spindle bore: 107 mm Spindle speed C-axis (main spindle): 400 rpm Travel in X-axis: 315 mm Travel in Z-axis: 1350 mm Number of tools: 12 Power max. 100% duty cycle: 4.9 kW Torque 100% duty cycle: 10.5 kW Speed range: 4500 rpm Lhedpfxszn Ih Ns Amzjn Tailstock Tailstock travel: 1200 mm Tailstock force: 14 kN Taper: 5 MK Quill travel: 120 mm Coolant system Capacity: 250 l Pump output: 1.7 kW Flow rate at 6 bar: 20 l/min Connected load: 65 kVA / 100 A Operating voltage: 400 V Dimensions and weight Weight approx. 10 t + 0.65 t Dimensions approx. 6000 x 3050 x 2270 Equipment: - Chip conveyor without pump - Machine feet Inquiry item: Transportation costs will be provided in a separate quote.

Condition: used, offer consists of: Lhedpfxezpwhhe Amzsn MBO folder T520-2-52/4 numbers of buckles / knifes: 4 buckles 2 knife All-Inclusive Service Package We take care of everything: from secure packaging and transportation to customs clearance. Upon request, we can also provide a customized leasing offer. Sustainable and Economical Choose a used machine and benefit twice: Save the environment and your budget. Despite possible signs of use, you receive a quality product at an attractive price.

Condition: excellent (used), Year of construction: 1996, spindle bore: 160 mm, Swing over bed Ø 1040 mm Swing over cross slide Ø 710 mm Swing in the gap Ø 1580 mm DBC Turning Length 3000/4500 mm Gap length 1500 mm Spindle bore 160 mm Spindle power Lhodpfxextbf Ej Amzjn 40 kW Bed width 800 mm Spindle taper 6 Mk Workpiece weight 3500 Speeds / ranges 800 Rpm Feed rate X-Axis 10000 mm/min. Feed rate Z-Axis 10000 mm/min. Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Heidenhain LS 403 ML 1020mm ID: 226 520 NS linear scale SN: 5947096W, used, in good condition, 100% functional, delivery as shown in the photos. Ljdpfx Aox Er Ecomzohn

Condition: good (used), Flame cutting system, torch, oxyfuel cutting system, cutting torch, welding torch, hand cutting torch, welding kit -Manufacturer: WMW, Hand cutting torch cutting insert with lever valve -Type: 520/1 EN ISO 5172 -Number: 6x cutting torches available -Price: per piece Lsdsx Hfdzjpfx Amzshn -Dimensions: 465/100/60 mm -Weight: 1.1 kg/pc.

Condition: used, functionality: unexamined, Adapter and gluing machine VEA 520 Lhsdpfx Amjzua Izezon see images untested, price includes loading

Condition: ready for operation (used), Year of construction: 2017, operating hours: 3,548 h, clamping force: 1,600 kN, screw diameter: 45 mm, injection weight: 294 g, overall weight: 6,983 kg, Hydraulic injection moulding machine manufactured in 2017. This SUMITOMO SHI DEMAG Systec 160/520-600 features a clamping force of 1600 kN and a tie bar distance of 520 mm. The machine includes an injection unit with a screw diameter of 40 mm, 45 mm, and 50 mm, and a maximum shot weight of 313 g. If you are looking to get high-quality injection moulding capabilities, consider the SUMITOMO SHI DEMAG Systec 160/520-600 machine we have for sale. Contact us for further details. Ljdezbh Epjpfx Amzjhn • Tie bar distance: 520 mm • Injection unit: 600 • Control: S-Dias • Screw diameter: 45 mm • Injection pressure: 1914 bar • Shot volume: 294 cm³ • Shot weight (PS): 254 g • Injection stroke: 469 mm • Installed heating capacity: 11.3 kW • Oil tank capacity: 290 l • Pump drive: 25 / 45 kW • Noise level: 69 dB(A) • Dimensions: 5.6 x 2.1 m • Main electrical connection: 3/400 V, 50 Hz, 167 A • Max pressure: 190 bar • Platen size: 770 x 770 mm • Max mold weight: 1300 kg • Max opening stroke: 500 mm • Min/Max mold height: 275 / 685 mm • Distance between platens: 1085 / 1185 mm

Condition: excellent (used), Radial fan, conveying blower, high-pressure radial fan, pressure blower, vacuum blower, ventilation blower, blower, radial blower, press conveyor, pneumatic conveyor with injector, grain conveyor -Pressure blower: Pneumatic conveyor with filling hopper -Type: Ø 520 mm -Engine power: 4.0 kW / 2920 rpm -Volume flow rate: m³/min -Inlet: Ø 215 mm -Fan wheel: Ø 520 x 45 mm -Fusing funnel: Ø 415 mm Lhsdpjzdzq Nefx Amzjn -Dimensions: 1790/650/H880 mm -Weight: 119 kg

Condition: good (used), Tires with rim, trailer tires, heavy-duty tires, heavy-duty wheels, forklift tires -Manufacturer: Yokohama, Complete wheel Super Lug 520 2 pieces tire with tube and rim -Tire size: 7.00-12 12PR14 -Bolt circle: Ø 220 x 26 mm -Hub bore: Ø 170 mm -Quantity: 1 piece available -Dimensions: Ø 680 x 185 mm -Weight: 33 kg Lhedpfxeyx Spzj Amzen

Condition: used, Year of construction: 2021, machine/vehicle number: MR003895, Neat, lightly used thickness planer with a planing width of 520mm. Electric adjustment of the worktable, digital readout, and pneumatically liftable jointer tables. A machine from the absolute top segment. New price of this machine approximately €20,000. The machine is equipped with the following options: - Tersa cutterblock including 1 set of knives Lodpfxoy I Nzaj Amzshn Technical specifications: - Serial number: AB00017878

Condition: good (used), Year of construction: 2005, Ref. no.: 18591 Manufacturer: ARBURG Type: 520 A 1600-400 All Electric Year of construction: 2005 Clamping unit Clamping force: 160 ton Opening stroke: 450 mm Distance between tie bars: 520 x 520 mm Mould height min.: 250 mm Mould height max.: 550 mm Opening width: 700 mm Platen size (h x v): 695 x 695 mm Injection unit Screw diameter: 45 mm Injection volume: 254 cm³ Shot weight: 232 g Injection pressure: 1580 bar Measurements and weight Machine weight: 7100 kg Dimensions LxWxH part 1: 5,1 x 1,7 x 2,3 m Further information: The ARBURG 520 A series is part of the fully electric ALLROUNDER range and is known for its high precision, energy efficiency, and reliability in injection molding processes. Lhjdjxf T I Nspfx Amzjn These machines are particularly suitable for the production of technical plastic parts with high quality requirements, as well as for applications where repeatability and process stability are essential. Typical features of this series include: * Fully electric drive for all main movements * High energy efficiency compared to hydraulic machines * Excellent injection and positioning accuracy * Quiet and clean operation (also suitable for medical applications) * Low maintenance requirements The 520 A series with 160 tons clamping force offers a very good balance between performance and flexibility and is widely used in industries such as automotive supply, medical technology, and technical plastics. ARBURG machines are well known for their durability and long service life, which makes this series highly attractive on the used machinery market.

Condition: used, Saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade, segment circular saw blade -Manufacturer: Arntz, saw blade Ø 520 x 4.5 mm -Inner diameter: 80 mm -Bolt circle: Ø 123 x 23 mm -Number of teeth: see photo -Weight: 6 kg Lsdov Ai Svjpfx Amzehn

Condition: ready for operation (used), Year of construction: 2015, clamping force: 1,600 kN, This 6-axis Arburg Allrounder 520 S 1600-290 / 290 was manufactured in 2015. It features a highly wear-resistant thermoplastic cylinder with a 30 mm diameter and a drive unit powered by a 30 kW motor. The machine is equipped with advanced control systems for both injection units and supports multi-component processing. If you are looking to get high-quality injection moulding capabilities, consider the Arburg Allrounder 520 S 1600-290 / 290 hydraulic injection moulding machine we have for sale. Contact us for further details. • Injection units and plasticizing • 1st injection unit: • Complete thermoplastic cylinder, 30 mm, highly wear-resistant • Nozzle contact force controlled, programmable • aXw Control ScrewPilot • 2nd injection unit: • 2nd injection unit 290, vertical • Complete thermoplastic cylinder, 30 mm, highly wear-resistant • Open nozzle 30 mm with nozzle tip; extended nozzle tip +20 mm; radius 15 • Heating band for open nozzle • Nozzle contact force controlled, programmable • aXw Control ScrewPilot • Standard worm gear coupling; coupling geometry: double-sided • Multi-component processing; parting line setup on short runners for 2nd injection unit • Injection closing with mold (“flying injection”) • Drive, hydraulics, and cooling • 65 l/min charging flow rate • Pressure accumulator module, 64 l storage volume (max. 230 bar); accumulator drive • Continuous oil cooling and filtration; increased cooling capacity • Machine cooling circuits controlled • Clamping system, ejector, and core pulls • Clamping plate set; central Ø 125 mm • Minimum installation height 450 mm (extended) • Ejector pressure P/Q controlled (requires T2); ejector cross • Core pulls: • Core pull 1 simultaneous movement (P/Q controlled, programmable) • Core pull 2 simultaneous movement (P/Q controlled, programmable) • Core pull 3 simultaneous movement (P/Q controlled, programmable) • Pneumatic core pull control 4 incl. pressure reducer • Electric core pull control 1 (requires VE 436/00) • Tool pneumatics/hydraulics connections Lhedpfx Aeyxdwdomzjn • Electrical connection pneumatic NVD 1 (in tool) • Electrical connection pneumatic NVD 2 (in tool) • Electrical and hydraulic connection NVD 3 (in tool) • Electrical and hydraulic connection NVD 4 (in tool) • Blow-out device 1 with pressure reducer; connection for blow-out device 2 • Cooling water and mold circuits • Shut-off valve for cooling water (inlet); shut-off valve for cooling water (inlet 2) • Cooling water filter 100 µm (inlet) • 3 cooling water circuits to fixed mold plate; 3 cooling water circuits to moving mold plate • Basic equipment for 2nd cooling water distributor (manual) with 7 free cooling circuits • Control and electrics • Selogica direct control; technology level • Fuse protection for heating circuits (1–6 with 16 A) • 15 electrical heating circuits for mold heating • Boost function for heating circuits (hot runner) • Upper guard open, raised to safety clearance • Fault indicator with flashing light • Operator authorization with chip card (EUROMAP 65) • Interfaces and connectivity • Interface for conveyor belt (machine base) • Prepared for six-axis robot with SELOGICA interface • Robot interface (EUROMAP 67), 50-pin • Emergency stop interface (24-pin, 2-channel) • Basic equipment for electric axis control • Host computer interface OPC-UA • Temperature control unit interface (20 mA); temperature control cable HB-THERM • Serial printer interface USB; external USB keyboard interface

Condition: ready for operation (used), Year of construction: 2021, operating hours: 67 h, clamping force: 1,600 kN, screw diameter: 45 mm, overall weight: 5,900 kg, controller manufacturer: ARBURG, controller model: SEOLOGICA direct, This 3-axis Arburg Allrounder 520S 1600-400 was manufactured in 2021. It features a screw diameter range of 35-45 mm and a clamping force up to 1600 kN. The machine includes a removal robot and an enclosure with a FilterFanUnit, ensuring clean operations. Ideal for precision plastic processing, it offers a mold clamping height of 250 mm and platen spacing of 825 mm. Contact us for more information about this machine. Additional equipment Lhsdpex D E Dyjfx Amzon • Cooling water connection: Max. temperature: 30 °C, Min. Δp: 1.5 bar | DN 25 Machine Benefits Technical Machine Benefits • Thermoplastic cylinder: 45 mm, high wear resistant • CrN coating (screw and non-return valve) • Standard screw coupling, square geometry • Open nozzle 45 mm • Larger holding pressure pump • Selogica direct control system • Technology level 2, servo-controlled with 2 control pumps • Ejector pressure P/Q controlled • Continuous oil cooling and filtration • Nozzle contact force controlled, programmable (1st injection unit) • Clamping plate set, central 125 mm • Machine raised by 100 mm (increased vibration elements) • 8 programmable digital inputs/outputs • 6 electric mould heating control circuits • 1 additional heating control circuit (nozzle or adapter) • 4 manually adjustable cooling circuits • Controlled machine cooling circuits • aXw Control ScrewPilot (1st injection unit) • Water-cooled control cabinet • Reinforced screw coupling with multi-spline geometry • Injection speed with ramp function (F90302 = 1) • Automatic heater standby switching • Sound pressure level: 70 db(a) | ± 3 Extra Information • Screw Diameter: 45 mm • Injection Pressure (Max.): 1580 bar • Shot Weight (Max. g PS): 232 g • Heating Output 9.7 kW | 5 zones • Net Machine Weight: 5900 kg

Condition: not inspected (used), functionality: unexamined, Pfeiffer Type: TMH 520 Ledpfx Amswnpq Ujzohn No: PM P02 420 /S132 For more data see image of type plate, device is untested.

Condition: excellent (used), Ball bearings, roller bearings, axial cylindrical roller bearings, cylindrical roller bearings -Manufacturer: NSK, cylindrical roller bearing, double row, unused -Type: NNU4976 E1 -Outer diameter: 520 mm -Inner diameter: 422 mm -Width: 140 mm -Number: 3x cylindrical roller bearings available -Price: per piece Lodjw A Nm Sjpfx Amzjhn -Dimensions: Ø 520 x 140 mm -Weight: 60 kg/piece

Condition: good (used), Year of construction: 2002, OMET Varyflex 520 Year of manufacture: 2002 Web width: 520 mm Printing process: Servo-driven flexo (sleeve technology) Condition: Used – good working condition Location: Europe _____ Machine Configuration • 8 x flexo printing units (servo-driven, sleeve system) • Drying system: 7 x UV LED + 1 x conventional UV • Water-based ink compatible Lodpfxeyyn Ipe Amzjhn • 2 x die-cutting stations • 1 x additional die-cutting unit for sheet-off system • Sheet delivery with evacuation conveyor • Cold foil unit • In-line slitting system (scissor type) • Double rewinder (dual shaft) • Web inspection camera system • Chilled impression drums • Integrated chiller unit • Ink preheating system _____ Equipment & Tooling • 5 sets of sleeves • 12 anilox rollers • 5 magnetic cylinders _____ Technical Highlights & Advantages This OMET Varyflex 520 offers a very flexible configuration, making it suitable for a wide range of label applications.

Condition: used, Year of construction: 2019, controller manufacturer: Sonstige, controller model: , _____ Description: Year of manuf. : 2019 Control : Sonstige Double unwinding reel with drive Design:Short design Band width min./max.:230 – 520 mm Coil weight max.:2 × 30 kN Number of reels:1 Coil outer diameter min./max.:1,500 – 2,000 mm Spreading range min./ max.:460 – 525 mm Coil delivery:Industrial truck Reel loading:From the front (operating side) Coil unwinding:From the underside of the coil Material:Aluminium, soft Strip thickness min./max.:0.8 – 1.2 mm Tensile strength (Rm) min./max. :100 – 250 N/mm² Strip cross-section max.:600 N/mm² Straightening capacity:See straightening diagram Strip speed min./max.:2 – 10 m/min Strip infeed height above floor: 2,100 mm Degree of automation:Fixed / ± XXX mm Operating mode:Jog mode on sight system parameters System stroke rate:45 rpm Working direction:Right–left, front loading with forklift truck Flatness of installation site:± 15 mm Connection voltage:400 V, 50 Hz Ambient temperature:20 – 40 °C Compressed air connection:5 bar reel :Double reel with drive :Spreading :- Manual toggle lever system with hand crank :Coil limitation :22 November 2019 :22 November 2019 :- Single arms, manually adjustable according to scales, fixed at the front via :quick-release lever and at the rear via clamping screws :Brake/drive :- 2 frequency-controlled asynchronous motors :- 2 dual-circuit safety air pressure disc brakes :Swivelling :- Manual with 180° locking via pedal Lodpfx Amjz Enbbjzshn :Pneumatic pressure rollers with rubberised rollers at the top :mounted on brackets. :Hydraulic spreading :- Hydraulic spreading instead of manual spreading with hand crank :- Hydraulic unit with valves and piping mounted on the reel head :Belt pull-off and belt feed Belt loop :- Control via ultrasonic sensor/laser on the unwinding side

Condition: used, functionality: fully functional, planing width: 520 mm, total width: 800 mm, total height: 1,500 mm, overall weight: 900 kg, total length: 3,100 mm, working width: 520 mm, number of planer blades: 4, planer shaft diameter: 120 mm, table length: 3,050 mm, – CE marking – machine as new Lhedpfxsw Iqa Ns Amzjn TECHNICAL SPECIFICATIONS – max. planing width: 520 mm – cutterhead diameter: 120 mm – 4-knife cutterhead – TERSA knives – noise reduction comb at cutterhead – jointer shaft guard – table width: 51 cm – table length: 305 cm – hydraulic lifting by pedal – height counter – motor: 7.5 kW – tilting fence – manual star-delta switch – extraction port connection: 120 mm – two adjustable tables – quiet operation – full factory cast iron body – original factory paint – dimensions (L/W/H): 310 x 70 x 150 cm – weight: 900 kg

Condition: good (used), Inert gas welding device, arc welding system, MIG/MAG welding system -Scope of delivery: without wire feed unit with hose package, according to the pictures Lhsdpfslpi S Nex Amzsn -Manufacturer: Ess, inert gas welding machine MIG-MAG 520 MW without wire feed -Type: 520-2MW -Max. Welding power: 500 A -Water-cooled -Dimensions: 1160/500/H810 mm -Weight: 303 kg