Used Junker Quickpoint 3000/60 for sale (24,648)

Condition: used, Year of construction: 2001, Technical details: grinding diameter max.: 3-220 mm regulating wheel width: 400 mm max. width of grinding wheel: 400 mm grinding motor: 55 kW peripheral speed: max. 45 m/sec regulating wheel dimensions: 350 x 400 x 203 mm dimensions of grinding wheel: CBN 500 x 400 x 304 mm grinding wheel size: KORUND 600 x 400 x 304 mm total power requirement: 75 kVA weight of the machine ca.: 13 t. dimensions of the machine ca.: 4,47 x 2,77 x 2,49 m. Centerless Grindign Machine JUNKER JUPITER 500 CNC SIEMENS in good condition. Including: · 2 robots Kuka KR 16 Year 2007 · CNC loading and unloading device Promot EPL60NC Year 2007 The machine was lately used for grinding of guide bushes (through grinding). Plunge is possible. JUPITER's Centerless grinding, also available with CBN. Junker this circular grinding method with CBN grinding wheels, which opens up significant productivity benefits from the long service life of the grinding wheel, especially at high volumes. In addition, the simultaneous removal takes on the entire Schleswig-Holstein, which provides both in mass production and in small batches for significantly reduced processing times. The grinding process with JUPITER When centerless grinding, there are two grinding processes: the through grinding and plunge. Both methods are possible with the JUPITER. Applications through grinding: Pin and Bushings Body, rings, smaller rings, piston parts (eg compressors), waves with constant diameter piston rods (eg shock), Small piston for hydraulic and fuel injection, precision wires and rods, piston pins. Applications Plunge: Rotor shafts, transmission parts, bearing surfaces of camshafts, tube and pipe fittings for composite camshafts, universal joints, parts for needle injection, valve stems, barrel rolls. Isdpfx Abjttxg Ie Nsat *

Condition: good (used), For sale: professional transport ventilator Dräger Oxylog 3000 Plus – a device used in emergency medical services, ambulances, and healthcare facilities. Condition: The device powers on and works. The screen is clear, buttons and knobs are operational. Visually, it shows normal signs of use. The casing has minor cosmetic damage, which does not affect functionality or operation. Features: transport ventilation for adults and children; ventilation modes as per the Oxylog 3000 Plus model; adjustable breathing parameters; clear display with alarms. Included: Dräger Oxylog 3000 Plus ventilator, carrying bag, cables and connectors as shown in the photos. Additional information: used medical equipment; sold exactly as shown in the pictures; ideal as a backup transport ventilator for an ambulance, hospital, or technical unit. Isdpfxsx Tuyxo Ab Nsat

Condition: good (used), Technical Data for Shelf Rack System: Racking System: SSI Schäfer Type: R 3000 Technical Data for Installation: Number of rack rows: 01 pc. Rack length: 4,920 mm Number of bays per rack row: 03 pcs. Scope of delivery includes: 04x shelf rack upright frames, used Material finish: sendzimir galvanized Version: slotted Adjustment pitch: 26.5 | 26.5 mm Frame profile dimension: 31x60x0.88 mm Weight / piece: approx. 8.92 kg Including cross beam and base plates (upright frames are pre-assembled) 2,490 mm high 600 mm deep 18x shelves, used Material finish: sendzimir galvanized for frame depth: approx. 600 mm Total width: approx. 1,600 mm Total depth: approx. 594 mm Height: approx. 30 mm Weight / piece: approx. 8.12 kg Max. load per shelf 75 kg, with evenly distributed load. 72x shelf supports, used Suitable for plain uprights Material finish: sendzimir galvanized Ijdpfx Aey E S Htjb Noat 01x cross brace, used Type designation: KV31313 Weight / piece: approx. 0.405 kg / pc. Material finish: sendzimir galvanized 01x load sign Including information on bay and shelf load, manufacturer and commission number Dimensions: 297 x 210 x 2 mm Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is available for collection only. Any additional shipping or transportation of this item is subject to extra costs, which can be provided upon request depending on the delivery location and/or scope of delivery.

Condition: good (used), Technical data for shelving unit: Shelving system: SSI Schäfer Type: R 3000 Technical data for configuration: Number of shelving rows: 01 unit Shelving length: 6,560 mm Number of bays per row: 04 units Scope of delivery includes: 05x upright frames, used Material finish: sendzimir galvanized Design: slotted Adjustment grid: 26.5 | 26.5 mm Frame profile dimensions: 31x60x0.88 mm Weight / unit: approx. 8.92 kg Including bracing and base plates (uprights are pre-assembled) 2,490 mm high 600 mm deep 24x shelves, used Material finish: sendzimir galvanized For upright depth: approx. 600 mm Overall width: approx. 1,600 mm Overall depth: approx. 594 mm Height: approx. 30 mm Weight / unit: approx. 8.12 kg Maximum load per shelf 75 kg, with evenly distributed load. 96x shelf supports, used Suitable for smooth upright frames Material finish: sendzimir galvanized 02x cross braces, used Type designation: KV31313 Isdjy E N Nxopfx Ab Nsat Weight / unit: approx. 0.405 kg Material finish: sendzimir galvanized 01x load capacity sign with information on bay and shelf loads, manufacturer and commission number Dimensions: 297 x 210 x 2 mm Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about this item: This item is only offered for collection. If transport or shipping is required, this will incur additional costs, which can be requested separately depending on the delivery location and scope.

Condition: good (used), Technical Data for the Shelf Rack System: Rack System: SSI Schäfer Type: R 3000 Technical Data for Installation: Number of rack rows: 01 pc. Rack row length: 8,190 mm Number of bays per rack row: 05 pcs. Scope of delivery includes: 06x shelf rack uprights, used Material finish: sendzimir galvanized Version: slotted Adjustment pitch: 26.5 | 26.5 mm Frame profile dimensions: 31x60x0.88 mm Weight / pc.: approx. 8.92 kg Including gusset brace and base plates (Rack uprights are pre-assembled) 2,490 mm high 600 mm deep 30x shelf panels, used Material finish: sendzimir galvanized for upright depth: approx. 600 mm Total width: approx. 1,600 mm Total depth: approx. 594 mm Height: approx. 30 mm Weight / pc.: approx. 8.12 kg Max. load per shelf panel: 75 kg, with evenly distributed load. 120x shelf supports, used suitable for smooth uprights Material finish: sendzimir galvanized 02x cross braces, used Type designation: KV31313 Weight / pc.: approx. 0.405 kg/pc. Material finish: sendzimir galvanized 01x load capacity sign with specifications for bay and shelf loads, manufacturer and commission number Iajdpfxey E Hm Us Ab Nst Dimensions: 297 x 210 x 2 mm Your contacts at our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is offered for collection only. Any additional transport or shipping of this item will incur extra costs, which can be individually requested from us depending on the place of delivery and scope of supply.

Condition: excellent (used), Year of construction: 2005, Hedelius RS 60 K - 2000 Year of manufacture: 2005 Control: - Heidenhain iTNC 530 - Electronic handwheel Main spindle: - SK40 Ijdoy H D S Dspfx Ab Neat - Max. spindle speed: 15,000 rpm Travel paths: - X – 2000 mm (775 + 600) mm, Y – 620 mm, Z – 520 mm Table: - Clamping area fixed table 1200 x 600 mm (left working area) - NC rotary/tilting table (right working area) - NC rotary table, 360° rotatable / tilting +15 / -95° Coolant: - 20 bar through-spindle coolant (IKZ) - Chip conveyor Extraction: - Emulsion mist extraction system Delivery time: - Immediately available

Condition: new, Year of construction: 2025, stroke length: 300 mm, operating speed: 10 mm/s, reverse speed: 90 mm/s, table height: 900 mm, controller manufacturer: ESA, controller model: ESA S830, working width: 3,100 mm, bending force (max.): 160 t, distance between stands: 3,345 mm, control type: CNC control, number of axes: 4, actuation type: electric, Bending Capacity: 3100 mm / 160 Tons (E160 Model) STANDARD FEATURES CNC belt-driven servo press brake CNC-controlled Y1 – Y2 – X – R axes (4 axes) CNC control unit (ESA S830 – 10" touchscreen, 2D graphic display) Automatic bending calculation and collision avoidance functions High-precision synchronized servo drive system Belt-driven upper beam movement system requiring no lubrication and minimal maintenance Spring-loaded upper beam structure supporting energy recuperation O-Type rigid frame design (minimum deformation) 300 mm stroke 410 mm throat depth Servo-motorized backgauge system (X + R axes) Backgauge positioning accuracy: ±0.03 mm Backgauge travel distances: - X axis: 750 mm - R axis: 250 mm Hardened ball screws and linear guides 2 pcs, 3-stage backgauge fingers European style quick-release top tool holder (Promecam type) European narrow lower table Standard top punch (H: 67 mm – 85° – R: 0.8 mm) Standard bottom die (60×60 mm – 4 V: 16 / 22 / 35 / 50 mm – 85° – H: 60 mm) High-precision optical linear encoders LED work area lighting Sliding front support arms Dual foot pedal Emergency stop buttons Safety equipment in compliance with CE standards OPTIONAL FEATURES Additional backgauge axes (Z1 – Z2 – X5) Extension of backgauge travel up to 1000 mm Iaedpfx Asx Nquwjb Nst Motorized crowning system Hydraulic top and bottom tool clamping systems Front safety laser system (AKAS or DSP type) Rear safety light barrier CNC-controlled sheet support arms Laser bending line Laser angle measurement system Automatic angle measuring systems Air-conditioned cooling system for electrical cabinet Additional backgauge fingers Custom tool and table solutions TECHNICAL SPECIFICATIONS (E160 / 3100 MODEL) Bending force: 160 tons Bending length: 3100 mm Distance between side frames: 3345 mm Stroke: 300 mm Throat depth: O-Type frame Open height (upper-lower beam opening): 515 mm Table height: 900 mm Speeds: Descent speed: 90 mm/s Bending speed: 10 mm/s (in accordance with CE standards) Return speed: 90 mm/s Backgauge: X axis travel: 750 mm R axis travel: 250 mm X axis speed: 400 mm/s R axis speed: 100 mm/s Z axis speed: 600 mm/s General: Main motor power: 2 × 7.5 kW Machine weight: approx. 9,500 kg Machine dimensions (L×W×H): approx. 4600 × 2100 × 2700 mm

Condition: good (used), Technical data for the shelf rack: Shelving system: SSI Schäfer Type: R 3000 Technical data for installation: Number of shelving rows: 01 pc Shelf length: 47,330 mm Number of bays per shelving row: 29 pcs Scope of delivery: 30x shelf upright frames, used Material finish: sendzimir galvanized Design: slotted Adjustment grid: 26.5 | 26.5 mm Frame profile dimensions: 31x60x0.88 mm Weight / pc.: approx. 8.92 kg Incl. cross braces and base plates (upright frames are pre-assembled) 2,490 mm high 600 mm deep 174x shelves, used Material finish: sendzimir galvanized for upright depth: approx. 600 mm Total width: approx. 1,600 mm Total depth: approx. 594 mm Height: approx. 30 mm Weight / pc.: approx. 8.12 kg Max. load per shelf 75 kg, with evenly distributed load. 696x shelf supports, used Suitable for smooth uprights Material finish: sendzimir galvanized 10x cross bracing, used Type designation: KV31313 Weight / pc.: approx. 0.405 kg Material finish: sendzimir galvanized 01x load sign with information on bay and shelf loading, manufacturer and commission number Dimensions: 297 x 210 x 2 mm Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Iaodey Enpqjpfx Ab Not Mr. Falk Deutsch General information on the item: This item is offered for collection only. If transport or shipping is required, additional costs will apply, which can be requested from us separately depending on the delivery location and scope of delivery.

Condition: used, Year of construction: 1992, Lippert belt conveyor GF 30000-750-600 RA2269 Technical data: Conveyor length (NL): 30000 mm frame width (NB): 750 mm belt width (GuB): 600 mm Overall height (BH): 120 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 1,1 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Iaodpjrtu Dajfx Ab Not Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: good (used), Year of construction: 2000, 1 4-Bahnen-Flachbett (die 2 äusseren für Z-Schlitten; 2 innere für Reitstock) mit verfahrbarem Z-Schlitten auf äus seren 2 Führungen; Abstand 1160 mm auf inneren Führungen für Reitstock 700 mm Bettlänge mm 5300 Spitzenweite (Drehlänge zw. Futter-Höhe und Spitzen ) mm 3000 Spitzenhöhe mm 800 Drehdurchmesser über Bett mm 1600 Drehdurchmesser über Kreuzschlitten (zwischen Spitz en) mm 1400 Umlaufdurchmesser über Schlitten mm 1200 Bettbreite Führung Aussen mm 1160 Führungsbreite Reitstock MItte mm 700 Bett geschweisst; entspannt durch WIAP-Ersatzglüh- verfahren und vibrationsgedämpft nach dem pat. Verf Iaedpfjd D Nxkex Ab Njt ahren WIAP® VDSF® (Pat.Nr. 68433; Anm.4230130.30;PCT/CH95-00108; PCT/CH95-00108, PCT/CH95-1072, PCT/CH95-1073) Führungsauflagen geschliffen; Führungen austauschba r ohne Bettdemontage 1.2 Spindelstock / Hauptantrieb - festangeordnet Anzahl Spindelstöcke Stk. 1 Spindelmesskreis digital / linear Achsenlagenüberwachung keine; da Rundachse Spindelbohrung mm 112 Spindelnase A15 DIN 55021 Hauptspindelmotor: 100% ED kW 46 Nm 305 Motor 1PH7184 2NE Leistungsteil 6SN112-1AA00-0FA Hinter dem Spindelstock aufgebautes 3 Stufen Getrie be Automatisches über M Funktion programmierbares Getriebe Getriebstufe 1 RPM 5,6-120 Getriebstufe 2 RPM 16-360 Getriebstufe 3 RPM 45-800 Drehmoment Stufe 1: (100%) Nm 15236 Drehmoment Stufe 2: (100%) Nm 5290 Drehmoment Stufe 3: (100%) Nm 1904 Max Drehzahl RPM 800 1.3 Längs- und Querschlitten Stk. 1 Anzahl Querschlitten Stk. 1 Anzahl Längsschlitten digital / linear Achsmessystem am Motor Balluf Achsendlagenüberwachung (3er-Schaltpaket) RpM 2000 Achsantrieb Z-Vorschubmotor 27 Nm mm 1005 2 X Schlitten unabhängig verfahrbar Max Abstand in nen Ueber M Funktion ankoppelbar X Schlitten 1 4 Fach Rev. und X Schlitten 2 mit Angetr. Revolver kN 27 Vorschubkraft mm 6000 Max Vorschub / Eilgang Z mm 63 x 10 Vorschubart: spielfreie Kugelrollspindel mm 3020 Verfahrweg Z-Achse m / min 6* Eilgang Z-Achse (Auslegung 10 m / min) RpM 2000 Achsantrieb X-Vorschubmotor 1FT5076 18/22 Nm kN 15 Vorschubkraft mm 6000 Max Vorschub / Eilgang X mm 50 x 10 Vorschubart: spielfreie Kugelrollspindel mm 850 Verfahrweg X-Achse m / min 10 Eilgang X-Achse 1.3a Reitstock manuell verstellbar; luftunterstützt für leichtes V erschieben vibrationsgedämpft mit Konus für Reitstockspitze Pinolen-Durchmesser mm 200 Pinolen-Hub mm 200 Hilfsschleppeinrichtung mit dem Z-Schlitten vorhand en Klemmung mit Mutter & Hebel / Ringmutter mit div. Gewinden im Umkreis; versetzbar 1.4 Führungen Alle Führungen sind auf geschliffenen Flächen und reibgeklebt Abmessungen mm 90 x 50 Härte der Stahlführungen ca. HRc 55 - 60 Gegenführungen kunststoffbeschichtet Automatische Zentralschmierung mit elektr. Kontroll e Die schweren Einheiten werden für den Leichtlauf un d gegen Verschmutzung luftunterstützt mit dem WIAP® Press-Air-Verfahren 1.5 Werkzeugrevolver mit angetriebenen Werkzeugen Werkzeugrevolver Baruffaldi TOER 320 Typ K18.0320.12041.B Anzahl Pos Pos 8 Zylinderschaft-Durchmesser VDI 60 Revolver Scheibe Durchmesser aussen mm 570 Revolver Scheibe Durchmesser VDI 60 mm 476 Scheiben Dicke mm 95 Angetriebene Werkzeuge Stk. 4

Condition: excellent (used), Catalogue number: 7275 TECHNICAL DATA - Max. planing width: 610 mm - Max. planing height: 200 mm From above: - Toothed feed roller - Kickback pawls - 2 pressure rollers - Toothed feed roller - Pressure roller - 610 mm planing shaft, 4-knife, 7.5 kW - Pressure rollers - Smooth feed roller From below: - Guide bar - Adjustable infeed table with split, smooth sliding shaft - 610 mm planing shaft, 4-knife, 5.5 kW - 2 smooth, powered feed rollers - Side pressure roller At the rear: - Side spindles + 2 pressure rollers: 1) Right vertical spindle, 5.5 kW 2) Left vertical spindle, 5 kW - Max. planing height on side spindles: 200 mm - Spindle diameter: 35 mm - Spindles adjustable up/down, left/right 3) Additional horizontal spindle, 160 mm, adjustable up/down and left/right + tilting, approx. 4 kW - Planing possible with the additional spindle from above/below/side - Spindle diameter: 35 mm - Adjustable rollers on lower table - 2 feed speeds - Feed motor: 2.2 kW - Extraction port diameters: 120 mm - Dimensions (LxWxH): 2550 x 1700 x 1350 mm - Approx. weight: 3,000 kg Iedpfx Asytdkxjb Njat ADVANTAGES - Wide planer for wet and dry timber - Ideal for processing beams, floorboards, etc. - 2 horizontal planing shafts + 2 vertical spindles + 1 horizontal spindle - Complete with cutterheads - Manufactured by German brand KUPFERMUHLE - Used planer in very good condition - Original photos Net price: 58,900 PLN Net price: 14,020 EUR (based on exchange rate €1 = 4.2 PLN) (Prices may change with significant fluctuations)

Condition: excellent (used), CATALOG NUMBER 7503 TECHNICAL DATA: - Max. planing width: 610 mm - Max. two-sided planing height: 200 mm - Max. four-sided planing height: 100 mm Top section: - 2 rubber feed rollers - 2 toothed feed rollers - Metal feed roller - Toothed infeed roller - Pawls - Pressure beam - 2 toothed feed rollers - Pressure beam - 610 mm, 4-knife planing shaft, 7.5 kW - Pressure beam - Smooth metal feed roller - Pressure beam - Profiling shaft, 7.5 kW - Pressure beam - Rubber feed roller Bottom section: - Planing shaft, 35 mm diameter, 130 mm shaft length, 2.2 kW - 2 guide rails Iaedpfx Absyz Sfbe Njt - Infeed table - Smooth feed roller - 610 mm, 4-knife planing shaft (equipped with 2 knives), 7.5 kW - 2 smooth feed rollers - Divided metal slip roller - Side pressure roller Rear section: - Side spindles + 2 pressure units - 1) Right vertical 95 mm, 4 kW - 2) Left vertical 95 mm, 4 kW - Spindle diameter: 35 mm - Spindles adjustable up/down, right/left - Adjustable rollers in the lower table - Electric thickness adjustment - 6 feed speeds: 7 / 9 / 11.5 / 14 / 18 / 23 m/min - Feed motor: 3.1 kW - Extraction connector diameters: 3×120 mm, 3x160 mm - Dimensions (L x W x H): 3150 x 1900 x 1600 mm - Weight: approx. 3,500 kg ADVANTAGES: – The best wide planer for wet and dry wood – Perfect for processing beams, flooring, etc. – Additional profiling shaft and planer shaft (scorer) – 4 horizontal planing shafts + 2 vertical spindles – Manufactured by German brand KUPFERMUHLE – Used planer, very good condition Net price: 66,900 PLN Net price: 15,930 EUR (exchange rate: 4.2 EUR) (Prices may change with exchange rate fluctuations)

Condition: excellent (used), Catalogue no. 6815 TECHNICAL DATA - shaft width: 640 mm - number of knives: 4 pcs - max workpiece thickness: 230 mm top side: - toothed feed shaft, driven, sequential - pressure rollers - planing shaft - pressure rollers - smooth outfeed shaft, driven bottom side: - feed roller + infeed table - adjustable roller in lower table - outfeed table + roller - main motor: 5.5 kW - stepless feed speed adjustment - feed motor: 0.5 kW Iaodpsytd A Uofx Ab Nst - extraction port diameter: 150 mm - dimensions (LxWxH): 1630x1630x1140 mm - weight: 920 kg FEATURES - Italian-made - used thickness planer, in very good condition Net price: 17,900 PLN Net price: 4,260 EUR Net price calculated at 4.2 PLN/EUR (in case of significant currency fluctuations, the price may change)

Condition: excellent (used), CATALOG NUMBER 6935 TECHNICAL DATA - Shaft width: 630mm - Number of knives: 4 pcs - Max. thickness of workpiece: 210mm * Top section: - Anti-kickback fingers - Serrated feed roller, driven - Pressure bars - Planing shaft - Pressure bars - Smooth outfeed roller, driven * Bottom section: - Adjustable rollers on the lower table: 2 pcs - Motor: 4.4kW - 2 feed speeds - Dimensions (L/W/H): 1220x950x1060mm - Weight: 750kg ADVANTAGES – Made in Germany – Used thickness planer, very good condition Isdpfjytd Uqex Ab Nsat Net price: 16,900 PLN Net price: 4,020 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (price may vary in case of significant currency fluctuations)

Condition: excellent (used), Catalogue number 7732 Iasdpfxoyfhiis Ab Njt TECHNICAL DATA - pressing force: hydraulic - briquette shape: round - briquette diameter: 70mm - tank diameter: 1200mm - output: approx. 70kg/h - fully automatic machine operation - motor: 7.5kW - max working pressure: 150 bar - suction outlet diameter: 90mm - filter bag opening diameter: 500mm - max bag height: 900mm - dimensions (LxWxH): 1950x1400x2700mm - weight: 1130kg ADVANTAGES - Italian-made - direct connection to sawdust extraction possible - used briquetting press - operating & maintenance documentation (DTR) - condition: very good Net price: 29,900 PLN Net price: 7,120 EUR (based on 4.2 EUR exchange rate) (Prices may vary with significant exchange rate fluctuations)

Condition: used, Type: BR3000/600 Serial number: 888 Belt width: 600 mm Frying length: 3000 mm Heating: thermal oil, 90kW Power: 3 x 380V, 50Hz, 3.6kW Dimensions: 5650 x 1800 x 3450 mm Weight: 2150 kg Hold down belt, sediment removal, circulation pump, oil level control Iaedpfx Abjk Twyko Njt Prepared for CO2 fire extinguisher

Condition: used, Year of construction: 2000, type of input current: three-phase, We offer this used Junker Jucam 5002/20 S camshaft grinding machine, year of manufacture 2000. Year of manufacture: 2000 Power rating: 60 kVA Rated voltage: 400 V Frequency: 50 Hz Control voltage: DC 24 V Fusing: 3×100 A Voltage before main switch (circuit F 001): 230 V Voltage before main switch (circuit F 002): 400 V Production information JUNKER GROUP Operating manual included 4. Technical Data 4.1 Electrical connection values Power supply: 400 V / 50 Hz Power: 60 kVA Fusing: 3 x 100 A Conductor cross-section: 5 x 35 mm² Cu 4.2 Mechanical Data Workpiece Workpiece diameter: approx. 100 mm Max. workpiece swing diameter: 150 mm Clamping length: max. 900 mm Z-axis traverse path: max. 1000 mm Max. workpiece swing diameter in steady rest area: 150 mm Loading system Manual, with loading and unloading device Workpiece spindle head Stationary Max. speed: 250 rpm Workpiece drive: frictional connection Workpiece spindle Dimensions: 210 x 700 mm Flange diameter: 180 mm Standard collar diameter: 127 mm Lubrication: oil lubrication Tailstock spindle Longitudinal adjustment manual via sprocket Fixed centre, special version MK 3–centre Clamping pressure adjustable via hydraulics Grinding table Z-axis feed (CNC-controlled) Grinding spindle headstock X-axis infeed (CNC-controlled) Horizontal swiveling B-axis (CNC-controlled) Grinding spindle II Dimensions: 205 x 450 mm Flange diameter: 190 mm Standard collar diameter: 127 mm Lubrication: permanent grease lubrication Bearing seal with sealing air Set air pressure: see separate folder "Machine-specific data sheets" Drive: 30 kW Speed control with frequency converter Max. speed: 4,400 rpm Iodpfx Aoy Dv Sdjb Njat Balancing: electronic Grinding wheel (Grinding spindle II) Type: Borazon (CBN), ceramic bond Diameter: Ø 400 mm Bore: Ø 127 mm Grinding wheel width: 18 mm and 16 mm Max. peripheral speed: 125 m/s Steady rest Type GR – 110 – NR Diameter range: Ø 30.1 – Ø 40 mm Wheel dressing Fine dressing (circumference and flank) with diamond dressing wheel mounted on dressing spindle: Ø 110 mm Dressing spindle Dimensions: 80 x 250 mm Flange diameter: 100 mm Standard collar diameter: 75 mm Lubrication: permanent grease lubrication Bearing seal with sealing air Set air pressure: see separate folder "Machine-specific data sheets" Drive: 1.8 kW Speed control with frequency converter Max. speed: 24,000 rpm Balancing: electronic If you have any questions or require further information, feel free to send us a message or give us a call.

Condition: ready for operation (used), Year of construction: 2003, For sale due to lack of use: cylindrical grinding machine in good condition! Can be tested on site! Iaedpex Syk Tefx Ab Net

Condition: new, Year of construction: 2026, functionality: fully functional, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE Iaedpfx Asy H Aizjb Net • Model: FABO HY-600 • Type: Double Helix Screw Washer • Capacity: 60 ton per hour • Dimension: 1400 x 6650x1800 mm • Screw Size: Ø 600x6000 mm • Speed: 22 rev/min • Motor: 2 x 5.5 kW Heavy duty Gamak • Water Consumption: 55-205 m3 • Including chassis, motor and safety guards. FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: excellent (used), Year of construction: 1998, Erwin Junker BUAJ BN29C CNC Universal Cylindrical Grinder Excellent condition Can be viewed underpower and demonstrating if you wish to visit. Year 1998 Fanuc series 35i CNC Control Weight 2800kgs Dimensions approx 3000mm x 1850mm x 1800mm Specification - Distance between centres - 800mm Centre table clearance 150mm Work piece weight between centres, max 120kg Machine working capacity IT4 ISO Wheelhead Grinding wheel, max diameter - 400mm Grinding wheel, max, width - 63mm Grinding wheel, clamping diameter - 127mm Motor power - 5.5kW Grinding wheel, max. peripheral speed - 45m/s Wheel head, path of adjustment - 300mm Wheel head, adjustment angle - +45°/-15° Workhead Spindle taper - MK5 Spindle, stepless speed control - 23-291 or 56- 700rpm Work head, adjustment angle - 90° Ijdpfx Abeyvupxs Neat Tailstock Taper - MK4 Tailstock barrel, stroke 30mm Taper ratio, fine adjustment +/-0.15mm Longitudinal feed Table travel 756mm Table, working travel speed 0÷7.5m/min Top table, swiveling +/8°30

Condition: excellent (used), For sale: Professional industrial extraction unit by TEKA, model STRONGMASTER BIA, designed for welding fume extraction and air pollution control. ‼️ VERY LOW HOURS – ONLY 1,550 OPERATING HOURS (this is rare for this type of equipment) ⚙️ Technical specifications: Manufacturer: TEKA (Germany) Model: STRONGMASTER BIA Capacity: 3,000 m³/h Max. negative pressure: 2,500 Pa Motor power: 1.1 kW Power supply: 400V (3PH + N + PE) Frequency: 50 Hz Rated current: 2.5 A Protection class: IP54 Control voltage: 24V Weight: approx. 130 kg 🔧 Equipment: Flexible extraction arm Industrial filter Control panel Operating hours counter Mobile chassis with wheels 🔍 Condition: Used equipment, in good technical condition. Normal signs of use visible. Iasdpjyz Dilefx Ab Not ✅ Low hours – only 1,550h ➡️ Equipment is only lightly used ➡️ Significant potential for further operation

Condition: excellent (used), Year of construction: 2015, operating hours: 1 h, functionality: fully functional, machine/vehicle number: Z000071400101, total width: 1,400 mm, total length: 2,050 mm, total height: 2,150 mm, type of input current: three-phase, overall weight: 1,100 kg, Powerful industrial blower suitable for a variety of applications. The stationary fan with a 600 mm diameter can be used for cooling, ventilation, heat dissipation, or Iaedpfx Ajwbfm Seb Not for displacing water mist and dust. The unit has four rollers and forklift pockets for loading. Electric motor power (blower): 15 kW Air flow rate: 33,000 m³/h Speed: 13.8 kW / 1470 rpm Electrical connection: 400 volts / 50 Hz / 32 amps Cable length: 5.0 m Pickup and inspection available in D-89188 Merklingen.

Condition: used, Year of construction: 2014, workpiece length 100 mm swing diameter 80 mm number of spindles 2 Control FANUC 31i-B5 workpiece weight 2,00 kg centre height 170 mm grinding wheel diameter 100 mm grinding wheel hole diameter 32 grinding wheel width max. 20 peripheral speed max. 125 m/sec passage of steadyrest 45 - 60 mm total power requirement 75,00 kW weight of the machine ca. 25,00 t dimensions of the machine ca. 5,00 x 3,50 x H3,50 m Cam grinding machine for Cam-Pieces with FANUC 31i-B5 control; loading/unloading unit, CO2 extinguishing system; for CBN grinding wheel; tailstock; steady; diamond wheel dresser mounted on the dressing spindle; Wheelhead variant 12 (two grinding spindles can be moved separately). Iodpjyycwfefx Ab Noat

Condition: used, Year of construction: 2015, workpiece length 100 mm Iajdpfsyycv Ujx Ab Nst swing diameter 80 mm number of spindles 2 Control FANUC 31i-B5 workpiece weight 2,00 kg centre height 170 mm grinding wheel diameter 100 mm grinding wheel hole diameter 32 grinding wheel width max. 20 peripheral speed max. 125 m/sec passage of steadyrest 45 - 60 mm total power requirement 75,00 kW weight of the machine ca. 25,00 t dimensions of the machine ca. 5,00 x 3,50 x H3,50 m Cam grinding machine for Cam-Pieces with FANUC 31i-B5 control; loading/unloading unit, CO2 extinguishing system; for CBN grinding wheel; tailstock; steady; diamond wheel dresser mounted on the dressing spindle; Wheelhead variant 12 (two grinding spindles can be moved separately).

Condition: excellent (used), High-quality and very clean condition – well maintained automatic shrink wrapping line consisting of Lady Pack Auto 60 shrink wrapping machine and Madax shrink tunnel. This is a reliable industrial packaging solution suitable for a wide range of products including boxes, printed materials, cosmetics, food products, and general consumer goods. The machine offers automatic operation, making it ideal for efficient and consistent packaging in production environments. Main features • Manufacturer: Lady Pack (Italy) • Model: Auto 60 • Automatic shrink wrapping machine • Included shrink tunnel: Madax • Complete packaging line • Industrial quality construction • Easy operation and maintenance Condition The machines are in good working condition. Previously used in production and well maintained. Logistics Machines are available for immediate pickup. Loading assistance available. Located in Finland. Additional information • Suitable for industrial and commercial packaging • Reliable and proven technology • Compact and efficient line. Higher capacity alternative to semi-automatic machines. Can be connected and tested before purchase. After all, very clean condition – well maintained and ready for production use. Keywords: Shrink wrapping machine Automatic shrink wrapper Lady Pack Shrink tunnel Iodpfxoywpabj Ab Nsat Packaging machine L sealer