Used Kieserling Eccentric for sale (835)

Condition: used, Single-column eccentric press WEINGARTEN type ARP 100 Machine no. No. 122481 Year of construction 1984 Pressure capacity 100 ton. throat 400 mm Table size 920 x 660 mm ram surface 700 x 450 mm Rear upright width 735 mm Stroke adjustment 20 - 160 mm Plunger adjustment 80 mm Installation height with 160 mm stroke max. 355 mm (without intermediate table top) Installation height with 20 mm stroke max. 425 mm (without intermediate table plate) Stroke rate 60 strokes/min. Table surface intermediate table top 920 x 610 mm Thickness of intermediate table top 90 mm Hole in intermediate table top Ø 210 / 180 mm Through-hole in machine table Ø 210 / 180 mm Table height above floor 800 mm (without intermediate table top) T-slot width in table and ram 22 mm Lhodpfx Amsu Rwa Iozsn Clamping pin bore 50 mm Motor power 11 kW Mains connection 400 Volt, 50 Hz - Hydraulic overload protection in ram - ORTLINGHAUS pneumatic clutch/brake combination - Electromotive ram adjustment with counter - Clamping pin bore with clamping piece - Front crankshaft support bearing - Gear reduction gears in closed oil bath gearbox - Two pneumatic tappet compensation cylinders - WOERNER automatic central grease lubrication - Lift release via electric foot switch or two-hand control panel - Electrical control cabinet permanently attached to the machine - Operating instructions and circuit diagram - UVV for manual insertion work Space requirement L x W x H 2200 x 1600 x 3250 mm Weight 8.3 tons Good condition

Condition: good (used), Stock number: 2829 Manufacturer: Eisenwerk Hensel Bayreuth - EBU Machine number: P5044070 Type: SK 25 Press force: 25 t Table: 595 x 410 mm Lhedpfex Uwb Iox Amzen Ram: 170 x 150 mm Passage hole: 210 x 170 mm Throat depth: 200 mm Strokes per minute: 150 Stroke: 4 to 80 mm Ram height adjustment: 70 mm Table adjustment: 240 mm Condition: good Connection: 1.5 HP (1.1 kW) Weight: 1.5 t Dimensions: 800 x 1,300 x 2,000 mm

Condition: reconditioned (used), Year of construction: 2003, functionality: fully functional, power: 1.15 kW (1.56 HP), Equipment: CE marking, documentation/manual, SANGIACOMO T15 TECHNICAL SPECIFICATIONS: Press Model: T15 CE Serial Number: 11637 Year of Manufacture: 2003 Nominal Force: 150 kN Nominal Stroke: 1.8 mm Adjustable Stroke: 7÷60 mm Stop Position: TDC (Top Dead Centre) Ram Adjustment: 40 mm Stopping Time: 79 ms Strokes per Minute: 165 Lodpfjy Nx Ncox Amzohn Safety Distance (1.6 m/s): 127 mm Maximum Die Area: 260 x 360 mm Maximum Shut Height: 226.5 mm Minimum Shut Height: 200 mm Upper Die Mass: 25 kg Flywheel RPM at 1st: 165 Max Insertions at 1st: 70 Installed Power: 1.15 kW Voltage: 400 V Auxiliary Voltage: 24 V Working Air Pressure: 5.5÷6 bar Weight: 630 kg • Work table reconditioned on CNC machine. Complete with user manual, CE conformity certificate, and 6 months warranty (excluding electronic parts). INSTALLED NEW COMPONENTS: • Magnetic safety sensors on guards; • Flywheel bearings; • Electrical panel with touch screen;

Condition: excellent (used), functionality: fully functional, input voltage: 380 V, pressing force: 160 t, overall weight: 10,500 kg, punching force: 160 t, height adjustment type: electric, Eccentric Press ERFURT PEE(II) 160 for Sale For sale is an Erfurt PEE(II) 160 eccentric press in good condition, ready for immediate use. This is a robust and reliable industrial machine, ideally suited for various pressing, forming, and sheet metal processing tasks. Erfurt machines are renowned for their durable construction, solid design, and dependable performance. Therefore, this model is an excellent choice for metalworking companies, workshops, manufacturing businesses, or fabrication shops seeking a proven and high-performance press. Technical specifications: - Type: Erfurt PEE(II) 160 - Design: Eccentric press - Condition: Good - Operational status: Ready for immediate use This machine impresses with its heavy-duty build and reliable functionality in industrial applications. It is perfectly suited for daily use in production and can be put into operation immediately after purchase. If interested, further information, technical details, and additional photos can be provided upon request. Lhedjyvzzzepfx Amzen

Condition: excellent (used), Year of construction: 2001, Manufacturer: ROVETTA Model: S4-1500 Link Drive Year: 2001 Condition: Used Stock number: 0391 Manufacturer: Rovetta Number of strokes: 4 Ram force: 1500 tons Ram stroke: 763 mm Ram adjustment: 400 mm Daylight (bottom dead center, ram up): 1,200 mm Distance between front uprights: 5,700 mm Die bed dimensions: 5,500 x 2,500 mm Ram dimensions: 5,500 x 2,500 mm Moving table height: 600 mm Side window size: 3,400 x 1,900 mm Main motor power: 319 kW Blankholder (total force): 150 tons Blankholder stroke: 250 mm Blankholder working area: 2,000 x 1,200 mm Ljdpfsyq Tdiox Amzohn Strokes per minute: 8-24

Condition: excellent (used), Year of construction: 2001, Manufacturer: ROVETTA Model: S4-800 Year: 2001 Condition: Used Stock number: 0392 Ledpfx Amoyq Tdpszshn Builder: Rovetta Slide force: 800 tons Number of driving points: 4 Slide stroke: 700 mm Slide adjustment: 350 mm Strokes per minute: 10-24 Die height (low stroke, high slide adjustment): 1,100 mm Usable distance between front posts: 4,200 mm Bolster table size: 4,000 x 2,000 mm Slide dimensions: 4,000 x 2,000 mm Movable table height: 600 mm Side window size: 3,400 x 1,900 mm Number of cushions: 1 Blankholder cushion - total force: 150 tons Lower blankholder cushion stroke: 250 mm Lower blankholder working area: 1,500 x 1,000 mm.

Condition: as good as new (ex-display), Year of construction: 2022, machine/vehicle number: TYPE 63 R4, functionality: fully functional, operating hours: 100 h, power: 5.5 kW (7.48 HP), input voltage: 400 V, type of input current: three-phase, pressing force: 63 t, overall weight: 4,600 kg, Equipment: documentation/manual, EECCENTRIC PRESS OMERA Model: 63 R4 Basic Technical Data Nominal force: 630 kN Motor power: 5.5 kW Strokes per minute: 45–104 Slide stroke: 9–120 mm Clearance between table and ram: 310 mm Table dimensions: 750 × 570 mm Ram dimensions: 500 × 350 mm Lsdeyn Sdpjpfx Amzohn Table thickness: 65 mm Table opening: 165 mm Machine weight (approx.): 4,600 kg Machine dimensions (for transport): 2806 × 1244 × 1492 mm Power supply: 380 V / 50 Hz / 3 Ph Machine color: RAL 7035 (light grey) / moving parts RAL 5017 (blue) Machine Equipment Centralized lubrication system PLC: SCHNEIDER with control panel Inverter for adjustable press speed Pneumatic clutch Balancing cylinders Hydraulic overload protection system VPN connection for remote access Additional Equipment Additional work plate 750 × 570 × 65 mm (1 pc) Vibration dampers (1 set) Work area lighting (1 set) Tool protection and press operation monitoring system Machine Details Serial number: CM18355 Year of manufacture: 2022 Operating hours: approx. 100 Condition: Machine used only for demonstration and tool testing Documentation Complete documentation in Croatian language (printed and digital) Electrical and hydraulic diagrams CE Declaration of Conformity Disassembly, preparation, and loading for transport: approx. 1,500 EUR

Condition: like new (used), Year of construction: 1985, machine/vehicle number: 38754, functionality: limited functionality, operating hours: 200 h, pressing force: 250 t, This plate bending machine was installed new in 1989 and was used for 200 Hrs and never used ever since. The mechanical parts are fully functional and are in perfect condition but the electrical board needs fixing. Force: 250 mp (metric tons) Working Surface Length: 5600 mm Working Surface Width: 400 mm Working Surface Height: 100 mm Lodpfoykl Iaox Amzjhn Weight: Approximately 37,000 kg Press Sizes (LxHxW): 5700 x 3150 x 5200 mm

Condition: used, Year of construction: 1978, machine/vehicle number: 4788, Capacity: 35 ton Throat depth: 225 mm Ram stroke: 8 - 80 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 325 mm Table surface area : 600 x 450 mm Slide area: 300 x 225 mm Number of strokes: 160 s.p.m. Required power: 2,2 kW Ljdpfjw Tukijx Amzohn Dimensions L x W x H: 1000 x 1600 x 2200 mm Weight of machine approx.: 1,9 ton

Condition: used, Year of construction: 1974, functionality: fully functional, pressing force: 63 t, stroke length: 100 mm, ram adjustment: 63 mm, We offer this used Weingarten A 63 eccentric press, year of manufacture 1974, including punching tool. Pressing force: 63 t Strokes per minute: 120 Ram stroke: 8–100 mm Ram adjustment: 63 mm If you have any questions or need further information, please feel free to send us a message or give us a call. Ledpfjyryt Tjx Amzjhn

Condition: used, functionality: fully functional, power: 22.06 kW (29.99 HP), punching force: 250 t, EBU eccentric press suitable for inlay work, UV-tested Stroke adjustment from 10-140 mm Ram adjustment 80 mm Stroke rate 50 /min. Lhodpsv T Dapofx Amzsn

Condition: used, pressure 200 t throat - mm stroke 250 mm Table dimensions 2420 x 840 mm ram surface 1850 x 650 mm dayligth 500 mm ram adjustment 110 mm distance between columns 1900 mm table height 170 mm no. of strokes 25 - 45 Hub/min total power requirement 22 kW dimensions of the machine ca. 2550 x 2370 x 3820 mm weight 30 t Ljdpfx Asgk Rfzjmzohn - pneumatic clutch - press safety valve, Herion - cam switch, Balluff - chain break monitoring - hydr. overload, Hydac - motor. alide adjustment with digital display - separate control cabinet with safety control ABB - separate two-hand control panel with foot switch - slidable side protective doors - front protection by light barriers vertical + horizontal The machine shown and described above is safe for hand inlays. The machine is also in anorther variant or also can be used as an automatic feeder. Equipment possible according to customer agreement.

Condition: new, pressure 40 t throat 225 mm stroke 8-84 mm Table dimensions 580 x 450 mm ram adjustment 55 mm no. of strokes 130 Hub/min ram surface 185 x 180 mm ram hole 40 H7 mm hole in the table 210 x 170 mm T-slots 22 Lhedpfxob U Hwms Amzsn clamping plate 570 x 450 x 65 mm total power requirement 3,5 kW weight of the machine ca. 2,7 t dimensions of the machine ca. 1,4 x 1,1 x 2,1 m

Condition: new, pressure 25 t throat 200 mm stroke 4 - 80 mm table-size 520 x 400 mm Lsdpfx Aob U Hwnjmzjhn no. of strokes 160 Hub/min work capacity during endurance run 1370 Nm force 2740 Einzelhub adjustment of stroke 4 - 80 mm ram adjustment 40 mm ram surface 160 x 160 mm hole in the table 200 x 150 mm clamping plate 500 x 380 x 60 mm hole in the table 80 mm weight of the machine ca. 1,9 t

Condition: used, pressure 63 t throat - mm stroke 16 - 125 mm table-size 800 x 600 mm force 250 cutting surface 1600 mm² table adjustment range 220 mm total power requirement 6 kW weight of the machine ca. 5 t distance table/ram 562 mm Lhedpfx Amjch Umcjzjn press is to be dismantled and partially overhauled: - dismantling and checking - new colors - new control cabinet with ABB safety control and touch screen - current UVV test with brake time measurement and press test book - COnversion to safe operation

Year of construction: 1969, condition: used, pressure 63 t throat - mm stroke 16 - 125 mm table surface area 800 x 630 mm ram adjustment 70 mm no. of strokes im Dauerlauf 80 Hub/min max. distance table - ram 417 mm Ljdjh Dfctjpfx Amzohn ram surface 500 x 400 mm clamping plate thickness 70 mm total power requirement 6 kW weight of the machine ca. 5,5 t dimensions of the machine ca. m

Condition: used, Single-column – Eccentric press PELS - RICHTER, type PEKR 125 Machine no. 20684, year of manufacture 1967 Pressing force: 125 tons Ledpsfim Thjfx Amzohn Reach: 430 mm Table size: 1100 x 750 mm Ram surface: 890 x 650 mm Table opening: Ø 400 mm Stroke adjustment: 6 to 115 mm Ram adjustment: 100 mm Installation height for maximum stroke at the top: max. 450 mm Arbor hole: Ø 50 mm Stroke rate: 60 strokes/min Table height above floor: 900 mm Motor power: 7.5 kW Power connection: 380 volts, 50 Hz - Overload protection by shear plate in the ram - Compressed air coupling-brake combination DESCH - Ram weight balancing cylinder - Manual ram adjustment - Two-hand operation - Cam indexing mechanism - Central grease lubrication system Vögele - Stroke counter Space requirement L x W x H: 2300 x 1450 x 3030 mm Weight: approx. 10 tons Good condition

Condition: used, Year of construction: 1983, pressure 25 t throat 225 mm Lhedpfx Amjumm Swezon stroke 8 - 85 mm table size 560 x 450 mm ram head dimension 360 x 220 mm ram adjustment 55 mm no. of strokes 80 - 160 Hub/min total power requirement kW weight of the machine ca. 2500 kg dimensions of the machine ca. 1,135 x 1,365 x 2,145 m

Year of construction: 2002, condition: used, pressure 63 t throat 315 mm stroke 8-100 mm no. of strokes 140 Hub/min ram - range of adjustment 63 mm table surface area 1200x630 mm ram surface 800x315 mm Ljdpfxjlp U D To Amzehn hole in the table Ø 110 mm table height 820 mm tool hole in ram Ø 50 mm dayligth 335 mm total power requirement 7,5 kW weight of the machine ca. 5 t

Year of construction: 1971, condition: used, pressure 75 t throat 310 mm stroke 16-140 mm no. of strokes 105 Hub/min ram - range of adjustment 80 mm Lhedpfx Aolp U Eijmzen table surface area 800x610 mm ram surface 600x175 mm hole in the table Ø 170 mm table height 820 mm tool hole in ram Ø 40 mm weight of the machine ca. 4 t dimensions of the machine ca. 1500x2000x2700 mm

Condition: refurbished (used), pressure 100 t throat 350 mm stroke 20 - 120 mm table size 1100 x 700 mm ram head dimension 750 x 450 mm ram adjustment max. 90 mm no. of strokes 70 Hub/min strokes - infinitely variable 20 - 120 Hub/min daylight, max. stroke above - ram adjustment above 500 mm Lhodpjtv N Ibsfx Amzen hole in the table 400 x 300 mm hole in bolster plate 220 x 180 mm Breakthrough in column back 450 x 300 mm total power requirement 11 kW weight of the machine ca. 11,8 t dimensions of the machine ca. 2,1 x 1,3 x 2,8 m

Condition: used, pressure 100 t throat 355 mm stroke 8 - 130 mm table surface area 710 x 1200 mm T-slots at tabel 3 clamping plate thickness 75 mm no. of strokes 50/80 Hub/min ram adjustment 80 mm ram surface 450 x 560 mm T-slots at ram 2 tool shank hole (depth x diameter) 100 x 50 mm max. distance table - ram 540 mm distance between columns 400 mm connected load 11,5 kW weight of the machine ca. 9,0 t Overall size 1,65 x 2,25 x 3,05 mm - increased installation height - with die cushion Lhedpfx Aotqm Dhemzen - converted to safe control (Pilz PLC), safe for “hand inlay work”. on the open tool"

Year of construction: 1990, condition: used, pressure 75 t throat 300 mm stroke 8 - 110 mm table surface area 750 x 600 mm ram adjustment 75 mm ram surface 430 x 230 mm hole in the table 250 x 150 mm tool hole in ram 40 mm no. of strokes 60 + 90 Hub/min weight of the machine ca. 4,4 t total power requirement 4,5 - 6,8 kW dimensions of the machine ca. 1,95 x 1,1 x 2,35 m distance table/ram Hub unten, Stöß. unten 19 mm distance table/ram Hub oben, Stöß. oben 380 mm Lsdjd Nl E Uopfx Amzohn Furnishing: - with hydraulic clutch-brake combination, with new hydraulics and oil cooler - with gear transmission in oil bath - fixed table prepared for the attachment of tool changing consoles - 2 roller bars in the table - mechanical overload in the ram The following work is carried out on the machine / partial overhaul: - Machine is completely disassembled, checked, seals changed, defective parts exchanged etc - Machine is repainted - new Balluff cam control - new hydraulic unit with oil cooler for the clutch - new Vogel central lubrication - new control cabinet with touch panel and ABB safety control - Current UVV test with braking time measurement

Condition: new, pressure: 100 toStroke/min: 50table clamping area: 900 x 700tappet measurements: 500 x 350Stroke adjustment: 20 - 130Tappet adjustment: 100daylight: 400EEP-PK100 ECCENTRIC PRESS- Pneumatic coupling & brake combination - Hydraulic overload protection ( ¤2,800 due to the large working area, it is recommended )  - Capacity: 100 tons   - stroke/min. : 50 spm  - Table: 900 x 700 mm  - Pestle: 500 x 350 mm  - Stroke adjustment: 20 – 130 mm  - Plunger adjustment: 100 mm  - Installation height: 400 mm Accesories : - Stroke adjustment  - Min/stroke setting  - Automatic central lubrication  Lhedpfxsv Hin Eo Amzon - Security PLC: PILZ or SIEMENS  - Two-channel fuse control cabinet  - Light barrier: SICK, PILZ or LEUZE,  - Cat 4. CE. system  - 2 pieces. Fracture plates  - Bottom support plate for transport  - Underreach protection

Condition: new, pressure: 150Tappet adjustment: (automatische Verstellung) 40stroke lenght (max.): 10-125total power requirements: 15weight approx.: 9500messurements (LxWxH): 1800 x 1500 x 2600Stroke/min: 50-90 Machine Technical SpecificationsCE Compliance: The machine and all equipment are manufactured in accordance with CE regulations Light Curtains: SICK or PILZ PLC Control: Siemens S7-1200 Stroke Adjustment: Directly via the touchscreen interface Balancing System: Integrated Stroke Speed Adjustment: Via Mitsubishi frequency inverter Machine Frame: Full steel construction Guidance System: Inner and outer eccentric guides Crankshaft: Made of hardened 4140 steel Clutch & Brake: Pneumatic combination system Safety Valve: Dual-way safety valve Safety PLC: SICK or PILZ Operation Modes: Two-hand operation and foot pedal available Lubrication: Automatic centralized lubrication system Overload Protection: Hydraulic overload system Safety Guarding: Protective enclosure around the working area External I/O: 8-pin I/O ports on PLC (for external connections and signal exchange) Anti-Vibration: Rubber dampers under the machine feet (1 pair – 4 pieces) Power Supply: 400 V / 50 Hz Required Fuse: 32 A Control Panel: 19 Siemens touchscreen ? Main Technical DataOperation Modes: Inch / Single stroke / Continuous stroke Press Force: 150 tons Table Dimensions: 750 × 1000 mm (fixed table) Stroke Length: 10–125 mm (automatically adjustable via PLC) Ram Dimensions: 500 × 800 mm (Ø55mm pin receptacle & T-slots customized to customer needs) Stroke Rate: 50–90 strokes per minute Main Motor: 15kW (1,400 rpm) Lsdpfx Amstqwtdezshn Throat Depth: 325 mm Shut Height: 475 mm (adjustable down to 295 mm) Ram Bore Diameter: 50 mm Machine Dimensions:Length: 1,800 mm Width: 1,500 mm Height: 2,600 mm Machine Weight: approx. 9,500 kg Ram Adjustment: 40 mm (automatic adjustment)