Used Kieserling Eccentric for sale (805)

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Equipment: documentation/manual, type plate available, Taylor Hobson Talyrond 265 roundness measuring instrument. Extremely accurate; it can measure the roundness of lenses, optics, pistons, turbine components, tubes, shafts, and also eccentricity, e.g., of cams on a camshaft or journals of a crankshaft. It is certainly of interest for motorsport and tuning companies. The first photo is a "representative image" from a Taylor Hobson catalog, showing how it is constructed, except for the computer, which is a newer, more modern HP model with a small form factor. Max. diameter 350 mm Max. test piece height 500 mm (higher values are possible by measuring in two parts, up to a maximum of 1000 mm...) Self-centering of the workpiece +/- 5 mm Bdodpfjzcqy Esx Ahmeh Max. weight of test piece 40 kg The system has been used very little and has had only two owners. The first owner, from whom I bought it, was an implant company in Hamburg; it was used in a "medically clean environment" and is extremely clean. It was never located in a dirty machine hall. The year of manufacture is estimated to be between 2003 and 2005. The Taylor-Hobson measurement software is, of course, included and runs on the supplied HP computer (without a password...). It is also on the USB stick, perhaps for installation on another machine at your location. Accessories are included: the original Taylor-Hobson desk, computer, monitor, seven (7!) measuring probes, each of which is very expensive to purchase. A sample/sample lens (hemisphere) is included for calibration! The very detailed operating manual is on the USB stick, and all circuit diagrams and functional diagrams are also included! The system will be shipped on two Euro pallets via a freight carrier. It is already well secured on them. The Talyrond 265 and the desk will be wrapped with bubble wrap, etc., and secured with stretch film to provide extreme protection during transport. The system itself is fixed with "transport safety screws." Shipping is at the buyer's expense and will be on two Euro pallets. The measuring system should definitely be assembled and put into operation by a Taylor Hobson service technician, who can then also recalibrate the system on-site. This is now recommended after a few years. Errors can be made during assembly and commissioning. For example, some locking screws are installed for transport, and if you forget them, the system could be damaged when starting up. A truly well-maintained, very accurate system that will continue to provide excellent service for many years to come!

Condition: used, Keyway milling head, head for DECKEL milling machine, type FP 1 Bdedpfxjznn Hro Ahmjh Factory number: 21948 Dovetail width: approx. 74 - 88 mm Dovetail height: approx. 14.5 mm Dovetail length: 285 mm Distance from the front edge of the dovetail to the center of the gear: approx. 200 mm Stroke size: max. 80 mm Stroke rate: max. 475 double strokes/min. Tool holder: 4-sided, 16 x 16 mm with clamping plate - Stroke size adjustable via eccentric adjustment - Drive from the machine gearbox, within the dovetail guide (as with the normal vertical head) - This keyway milling head is inserted into the dovetail guide in place of the normal vertical milling head (Mounting in place of the vertical milling head) - Drive gear in the keyway milling head, 39 teeth, gear width 15 mm, presumably 15° pressure angle - Keyway milling head can be rotated 360° on the flange plate, degree scale +/- 35° - Small breakout point on the housing Weight: 28.5 kg DECKEL FP1 has a pressure angle of 15° on the drive wheel. DECKEL FP2 + FP3 have a pressure angle of 20° on the drive wheel.

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Tilting function, manual winch Bdsdpfx Aozy Ak Nehmeh Equipment: - Loading angle 10.5° - Universally usable, sideboards can be retrofitted - 10x lashing points Net price: €6,302.52 / Gross price: €7,500.00 Article number: MUI335502100.01 Technical data: • Brand: Martz • Model: GT UNIVERSAL 500 • Vehicle type: Construction machinery trailer • Vehicle condition: New vehicle • First registration: without first registration • TÜV/HU (technical inspection): 2 years from first registration • Internal dimensions (LxWxH): 507 x 210 x 0 cm • External dimensions (LxWxH): 663 x 221 x 94 cm • Loading height of the floor: 0 cm • Permissible total weight: 3,500 kg • Unladen weight: 902 kg • Payload: 2,598 kg • Chassis: Low loader (wheels under the body) • Tires: 195/55R10C • Suspension: KNOTT rubber spring axle • Support wheel: Yes, automatic • 100km/h approval: Optional, can be retrofitted DESCRIPTION • Ability to attach sideboards, tarpaulin frames, sideboard extensions, or front wall extensions at all 4 corners • Vehicle is also designed for all options after purchase: enormous potential for retrofitting: sideboards, tarpaulins, etc. can be retrofitted at any time • Screen-printed wooden floor, non-slip and waterproof • Steel loading ramp, standing on a shaft, 120cm • Sturdy eccentric locking mechanisms on the rear ramp • Lifting aid for the loading ramp • Very low chassis for a low loading angle • Hydraulically tilting loading platform (10.5° loading angle) • Manual hydraulic pump • Very stable steel frame, welded • Frame completely hot-dip galvanized • Numerous continuously welded crossmembers for high point loads • Manual winch with winch stand • 12x lashing points recessed in the frame profile (600dAN/kg), certified • Reverse assist • KNOTT overrun device and parking brake • Very stable V-drawbar, REINFORCED • 13-pole plug • Reversing lights • Large-format safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Rear position lights LED • Automatic support wheel _____ Accessories can be retrofitted by our specialist workshop! - Feel free to inquire about special requests! _____ - Financing or leasing possible - Delivery throughout the country possible - All prices include VAT - Vehicle registration document can be sent in advance, or transfer license plates (Germany) can be provided. - Export license plates including customs declaration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealers & repair - workshops for over 30 years. - Errors, omissions and prior sale excepted -

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Ramp Features: - Loading ramp - 8x Lashing points - Loading angle 16° Net: €4,886.56 / Gross: €5,815.00 Article number: MBA335401800.01 Technical data: • Brand: Martz • Model: BAU-3 400/3 S • Vehicle type: Construction machinery trailer • Vehicle condition: New • First registration: No first registration • TÜV/HU: 2 years from first registration • Internal dimensions (LxWxH): 400 x 182 x 25 cm • External dimensions (LxWxH): 601 x 242 x 182 cm • Loading height of the floor: 34 cm • Permissible total weight: 3,500 kg • Tare weight: 755 kg • Payload: 2,745 kg • Chassis: Low loader (wheels beside the body) • Tires: 195/50R13C • Suspension: KNOTT rubber spring axle • Support wheel: Yes, automatic • 100km/h approval: Optional, can be retrofitted DESCRIPTION • Robust steel fenders, walkable, with continuous safety anti-slip strips • Screen-printed wood floor, continuous without joints, slip-resistant and waterproof • Very stable steel frame, welded • Frame completely hot-dip galvanized • Steel loading ramp, standing on a shaft • Stable eccentric locking mechanisms • Insertion option at all 4 corners for tarpaulin frames, grid attachments, side extensions or front panel extensions • Robust support feet on the loading ramp • Lifting aid for the loading ramp • Very low chassis for a low loading angle • With bucket rest • 8x lashing points recessed in the frame profile (600dAN/kg), TÜV certified Bedozy Amkjpfx Ahmsdh • Maintenance-free rubber spring axles from KNOTT • Reversing automatic • KNOTT drawbar coupling and parking brake • Very stable, bolted V-drawbar, REINFORCED • 13-pin connector • Reversing lights • Large-dimensioned safety lighting • Rear position lights • Integrated rear fog light • Lighting recessed in the rear frame • Automatic support wheel in the center _____ Accessories can be retrofitted by our specialist workshop! - Feel free to inquire about specific requests! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT. - Vehicle registration document can be sent in advance, or transfer license plates (Germany) can be provided. - Export license plates including customs registration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair workshop for over 30 years. - Errors, omissions and prior sale excepted.

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Ramp Equipment: - 8 lashing points - Approach angle 16° - Loading flap Net price: €2,899.16 / Gross price: €3,450.00 Bdedpfxjx Tbkks Ahmsh Article number: MBA227261500.01 Technical data: • Brand: Martz • Model: BAU-3 260/2 S • Vehicle type: Construction machinery trailer • Vehicle condition: New • First registration: Without first registration • TÜV/MOT: 2 years from first registration • Internal dimensions (L x W x H): 260 x 150 x 25 cm • External dimensions (L x W x H): 460 x 210 x 164 cm • Loading height of the floor: 34 cm • Permissible total weight: 2,700 kg • Unladen weight: 522 kg • Payload: 2,178 kg • Chassis: Low-loader (wheels next to the body) • Tires: 195/50R13C • Suspension: KNOTT rubber spring axle • Support wheel: Yes, automatic • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Robust steel fenders, walkable, with continuous safety anti-slip strips • Screen-printed wood floor, non-slip and waterproof • Very stable steel frame, welded • Frame completely hot-dip galvanized • Steel loading flap mounted on a shaft • Stable eccentric locks • Option to insert accessories at all 4 corners for tarpaulin frames, grid attachments, sideboards or front panel extensions • Robust support feet on the loading flap • Lifting aid for the loading flap • Very low chassis for a low approach angle • With bucket storage • 8 lashing points recessed in the frame profile (600dAN/kg), TÜV certified • Maintenance-free rubber spring axles from KNOTT • Reverse automatic • KNOTT overrun device and parking brake • Very stable bolted V-drawbar, REINFORCED • 13-pole plug • Reversing light • Large-sized safety lighting • Rear position lights • Integrated rear fog light • Lighting recessed in the rear frame • Automatic support wheel in the middle _____ Accessories can be retrofitted by our specialist workshop!! - Please feel free to request any specific requirements! _____ - Financing or leasing possible - Delivery throughout Germany possible - All prices include VAT. - Vehicle registration document can be sent in advance, or transfer license plates (Germany) can be provided. - Export license plates including customs registration possible Descriptions and images are subject to copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers available immediately! We have been a specialist dealer and repair workshop for Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix for over 30 years. - Subject to errors, omissions and prior sale -

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Tilting function Features: - Tilting loading platform - 8 tie-down points - Universally applicable, sideboards can be retrofitted Net price: €2,092.44 / Gross price: €2,490.00 Article number: MUL115331800.01 Technical data: • Brand: Martz • Model: UNILADER 330 C • Vehicle type: Car transporter • Vehicle condition: New • First registration: Without first registration • TÜV/HU (technical inspection): 2 years from first registration • Internal dimensions (L x W x H): 330 x 184 x 0 cm • External dimensions (L x W x H): 490 x 245 x 87 cm • Permissible total weight: 1,500 kg • Unladen weight: 340 kg • Payload: 1,160 kg • Chassis: Low-loader (wheels next to the body) • Tires: 185R14C • Suspension: KNOTT rubber spring axle • Support wheel: Yes • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Screen-printed wood floor, slip-resistant and waterproof • Option to insert at all 4 corners for grating attachment, sideboard attachment, or front wall extension • Sturdy eccentric locking mechanisms for securing the loading platform • Very low chassis for a shallow loading angle • Tilting loading platform, with gas springs • Optional retrofitting of higher sideboards and a rear ramp • Very stable steel frame • 8 tie-down points recessed in the side frame profile • Reverse assist system • KNOTT overrun device and parking brake Bedpfx Ahox Tcfpemjdh • Very stable, bolted V-drawbar • 13-pin connector • Reversing light • Large-sized safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Support wheel _____ Accessories can be retrofitted by our specialist workshop!! - Please feel free to inquire about specific requests! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance, or transfer plates (Germany) can be provided. - Export license plates including customs declaration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years - Errors, omissions and prior sale excepted -

Condition: new, The manual milling machine Omec 650-M is utilised to indent dovetails for drawers and various furniture elements. The machine is equipped with a mill spindle which allows cutting of indents of adjustable height. The machine can cut four types of indents with different pitches. Locking and unlocking of pieces takes place manually by means of eccentric ar- bores. The controls are realised with a magnetothermic switch that is directly installed on the terminal board of the motor, and lever hand wheels installed at the sides of the machine. The machine is designed and built according to EC Safety Standards installed power 0,75 kW, 400 V, 50 Hz no of spindles # 1 spindle revolutions 16.500 RPM machine weight 100 kg machine dimensions (l x w x h) 450 x 540 x 1420 mm work piece dimensions: work piece lenght 200 – 1500 mm work piece width 60 – 280 mm intent height 5 – 18 mm front thickness 7 – 45 mm side thickness 7- 30 mm Bdodpfxsdcdwbj Ahmjh The machine is supplied with the following components: - Eccentric HSS mill cutter assembled on the machine - Tool Kit for adjustments and maintenance - User's and instruction manual

Condition: excellent (used), Year of construction: 2006, machine/vehicle number: 12501, functionality: fully functional, pressing force: 10 t, table width: 222 mm, table length: 322 mm, overall weight: 450 kg, installation height: 197 mm, ram adjustment: 30 mm, stroke adjustment: 42 mm, Used San Giacomo eccentric press T 10V CE in very good condition, with a base frame for pallet truck transport. Further details available upon request. Bdedpsx A Ah Tefx Ahmeh

Condition: new, Heavy-duty work table made of robust, ribbed cast iron Sturdy base made of welded steel Precise panel gliding table made of anodized aluminum Carbide guide rails – for lasting precision and minimal maintenance of the gliding table Swiveling cast iron saw head with double segment guide Solid parallel fence with round bar guide Integrated miter gauge on the gliding table Scoring saw with its own powerful drive motor (optional) Equipped with a high-quality rip fence and telescoping stop, integrated roller, angled scale, and practical eccentric clamp Saw blade speed adjustable in two stages (from above, work table with removable insert) Including saw blade pendulum guard Bedpoit I Sbefx Ahmjdh INCLUDES OPTIONAL DIGITAL DISPLAY FOR PARALLEL FENCE Max. cutting height at 90° (mm) 140 with 400 mm blade Max. cutting height at 45° (mm) 100 with 400 mm blade Saw blade swivel angle (degrees) 90/46 degrees Raising and swiveling of the saw blade unit: manual Saw blade speed (rpm) 3500/5000 Main motor power (kW) 50 Hz 7.5 Scoring saw motor power (kW) 50 Hz 1.3 Scoring saw speed (rpm) 9200 Panel cutting size (mm) 3200x3200 Cutting width for parallel cuts (mm) 1270 Dust extraction port diameter (mm) 120, 60

Year of construction: 2017, condition: good (used), Manufacturer: PCM Type: M 6C12S Year of manufacture: 01/2017 (used sparingly for molasses) Includes: Control cabinet + one piece of hose The designation Mod. M 6C12S-IND refers to a specific model variant of an eccentric screw pump (Progressive Cavity Pump) from the EcoMoineau™ M or C series by the manufacturer PCM. In industrial practice, the code is usually broken down as follows: Mod. M: Design or series (often a horizontal monoblock/industrial design). 6C12S: Specification of the hydraulic pump element (rotor/stator). The “6” usually indicates the flow rate per 100 revolutions (in liters) or the size, “C” indicates the geometry, and “12S” indicates the maximum operating pressure (up to 12 bar) for the corresponding number of stages. IND: Stands for Industrial (industrial design for demanding continuous use in wastewater treatment plants, the chemical industry, or the processing industry – as opposed to the food or hygiene variants of the manufacturer). Bodpfx Ahoztvpfjmedh Technical core components & performance, flow rate & pressure: When used with thin fluids (such as water at 0 bar), it achieves a flow rate of up to 4 m³/h and is designed for a maximum system pressure of up to 12 bar. Operating principle: A stainless steel rotor rotates eccentrically in a flexible elastomer stator. This creates moving cavities that transport the medium with low pulsation and gently (also ideal for viscous, abrasive or chunky media). Spare parts: Common spare parts, such as stators, are available in different elastomers (e.g. NBR (nitrile), EPDM, Viton or CSM/Hypalon) in order to optimally adapt them to the respective medium. Offer is valid without warranty.

Condition: used, Pressure total: 800 ton Ram stroke: 700 mm Slide adjustment: 500 mm Shut height (stroke down, adjustment up): 1350 mm Free frontal opening L-R: 3550 mm Table surface area : 3500 x 2000 mm Slide area: 3500 x 2000 mm Die cushion capacity in table: 150 ton Die cushion stroke: 200 mm Die cushion pad area: 2700 x 1500 mm Number of strokes: 7 - 21 s.p.m. Ejector in ram: 60 ton Ejector stroke in ram: 150 mm Required power: kW Height over floor approx.: 8600 mm Weight of machine approx.: 250 ton Standard configuration Bdedpfxoz Hi Rgo Ahmeh LINK DRIVE

Condition: used, Year of construction: 2015, operating hours: 35,000 h, functionality: fully functional, machine/vehicle number: HS6434, path measurement accuracy: 620 mm, type of input current: AC, total width: 620 mm, total length: 3,820 mm, total height: 700 mm, overall weight: 300 kg, input voltage: 230 V, The Cox & Plant HS6434 is a high-performance, industrial-grade electromagnetic vibratory conveyor designed specifically for the hygienic handling of bulk solids, particulates, and fragile products. Manufactured in 2015, this unit represents the pinnacle of Cox & Plant’s specialist engineering in efficient, low-maintenance food and chemical processing technology. Utilizing a precise 6mm stroke amplitude driven by heavy-duty electromagnetic coils, the system offers instantaneous start/stop control and eliminates the mechanical wear components (like belts, bearings, and eccentric drives) common in traditional conveyors. Bjdpszz Ax Aefx Ahmedh

Condition: new, empty load weight: 890 kg, maximum load weight: 2,610 kg, overall weight: 3,500 kg, loading space length: 6,110 mm, loading space width: 2,030 mm, loading space height: 300 mm, tire size: 195/50r13c, felge schwarz, *High loader tandem* from *manufacturer* HULCO model Go-Getter MEDAX-2 3500.611x203. The standard equipment of the *Hulco* GoGetter *high loader with brakes includes aluminum side panels all foldable and removable in black, sturdy eccentric locks, lashing eyes inside, lashing hooks outside, steel rims in black, storage box on the drawbar in black, LED lighting, profile channels for attaching accessories or load securing, very stable welded lattice steel frame, pull-out supports for tailgate, support wheel and a V-drawbar. Bodpfx Ahon Apikemjdh We also offer accessories for *Hulco car trailers* such as high tarpaulin, net hooks, drive-on rail set with holder, rear support set, belts and anti-theft device.

Condition: excellent (used), CATALOGUE NUMBER 7908 TECHNICAL DATA - tool diameter, Wescott chuck 0-20mm - max. hole depth 155mm - max. milling length 250mm - adjustment via drilling unit, forward/backward, right/left + angle - table adjustment, up/down - table swivel angle 0-45˚ - working table dimensions 600x320mm Bdsdpfx Aezr I H Tehmsh - four-point cutting head 16-22-25-32mm - 2 material clamps - motor power 2.2kW - dimensions L/W/H 1050x800x1250mm - weight 200kg ADVANTAGES - German made - very good condition - eccentric clamps, 2 pieces - unpainted - used drilling machine Net price: 6500 PLN Net price: 1510 EUR, depending on the exchange rate of 4.3 EUR (Prices may vary due to significant exchange rate fluctuations)

Condition: like new (used), functionality: fully functional, Year of construction: 2022, operating hours: 29 h, roller diameter: 90 mm, sheet thickness steel (max.): 2 mm, overall weight: 520 kg, power: 1.1 kW (1.50 HP), working length: 1,270 mm, For sale is a like-new round bending machine with only 26 operating hours! TECHNICAL DETAILS Work area Working length: 1,270 mm Sheet thickness at 450 N/mm²: max. 2.5 mm Sheet thickness at 700 N/mm²: max. 1.5 mm Sheet thickness for conical bending of steel sheet: 2 mm Roller diameter: 90 mm Roller speed: 6 m/min Diameter of feed grooves: 4 / 6 / 9 mm MACHINE DETAILS Motor power, main drive: 1.1 kW Dimensions & Weight Dimensions (L x W x H): 1,850 x 700 x 1,200 mm Weight: 520 kg EQUIPMENT 3-roller round bending machine with asymmetrical roller arrangement Robust machine frame made of spheroidal graphite cast iron Induction-hardened rollers, also suitable for processing stainless steel Main motor with braking system for precise bending Swiveling top roller with eccentric locking for easy workpiece removal Wire feed grooves on the lower and rear rollers Conical bending device Manual adjustment of the rear roller Separate mobile control console with foot switch for left/right operation Emergency stop safety cable Side cover Operating manual Bdsdpfjz Dw Emex Ahmeh

Condition: new, cutting diameter 220 mm saw band length 2450 x 27 x 0,9 mm Bsdpfxjfgyh Nj Ahmsdh table height 915 mm band speed 35 + 70 m/min connected load frequency 400 V capacity 90 degrees: round 220 mm capacity 90 degrees: square 210 x 210 mm capacity 90 degrees: flat 230 x 185 mm total power requirement 1,2 kW weight of the machine ca. 240 kg dimensions of the machine ca. 870 x 1550 x 1740 mm The Zimmer Z241/R is a self-lowering saw for miter cuts from 0 ° - 60 ° left. After the cut, the machine stays through one Safety limit switches stand. The reduction is infinitely variable Hydraulic system adjustable. The saw arm can be raised after the cut any position. The saw arm remains at the desired position stand. The Z241 / R has the following features: Hydraulic cylinder, emulsion pump, eccentric tensioner, base, saw band, 400V Connector -16A- The machine is completely assembled and delivered ready for use.

Condition: new, table diameter 600 mm table load 0,6 t swivelling range 0 - 90 Grad turning speeds 0,1 - 1,8 U/min max. torque on the faceplate 450 Nm table pass 80 mm welding current 500 Ampere total power requirement 0,18 + 0,18 kW weight of the machine ca. t ELDING TABLE WITH LARGE THROUGH BORE • Self-locking gearbox, no pre- or after-run with eccentric load. • Electronic components from Siemens and Schneider. Bdedpfx Ahefv Awzemeh • Frequency-controlled, very accurate speed control. • Turntable with large through hole and T-slots. • High stability through a clever construction. • CE certificate. • Very good price / quality ratio. • The D-TLP series comes with remote control and foot pedal (left / right). No original pictures. Design but identical.

Condition: new, table diameter 1200 mm table load 1,2 t swivelling range 0 - 120 Grad turning speeds 0,06-0,6 U/min Bsdofv Aw Nspfx Ahmodh max. torque on the faceplate 2400 Nm table pass 200 mm welding current 500 Ampere total power requirement 0,75 + 1,1 kW weight of the machine ca. 1,0 t ELDING TABLE WITH LARGE THROUGH BORE • Self-locking gearbox, no pre- or after-run with eccentric load. • Electronic components from Siemens and Schneider. • Frequency-controlled, very accurate speed control. • Turntable with large through hole and T-slots. • High stability through a clever construction. • CE certificate. • Very good price / quality ratio. • The D-TLP series comes with remote control and foot pedal (left / right). No original pictures. Design but identical.

Condition: new, table diameter 1400 mm table load 2,0 t swivelling range 0 - 135 Grad turning speeds 0,05 - 0,5 U/min max. torque on the faceplate 6000 Nm table pass 200 mm welding current 700 Ampere total power requirement 1,1 + 2,2 kW weight of the machine ca. t ELDING TABLE WITH LARGE THROUGH BORE • Self-locking gearbox, no pre- or after-run with eccentric load. • Electronic components from Siemens and Schneider. • Frequency-controlled, very accurate speed control. • Turntable with large through hole and T-slots. • High stability through a clever construction. • CE certificate. Bdodpfsfv Aw Tex Ahmsh • Very good price / quality ratio. • The D-TLP series comes with remote control and foot pedal (left / right).

Condition: new, table diameter 2500 mm table load 20,0 t swivelling range 0 - 135 Grad turning speeds 0,04 - 0,4 U/min max. torque on the faceplate 40000 Nm table pass 200 mm welding current 1000 Ampere total power requirement 5,5 + 11,0 kW weight of the machine ca. t Bdedpfefv Axmox Ahmoh ELDING TABLE WITH LARGE THROUGH BORE • Self-locking gearbox, no pre- or after-run with eccentric load. • Electronic components from Siemens and Schneider. • Frequency-controlled, very accurate speed control. • Turntable with large through hole and T-slots. • High stability through a clever construction. • CE certificate. • Very good price / quality ratio. • The D-TLP series comes with remote control and foot pedal (left / right). No original pictures. Design but identical.

Condition: new, table diameter 1300 mm table load 3000 Kg swivelling range 0 - 130 Grad turning speeds 0,05 - 0,5 U/min height adjustment 1200 - 1800 mm max. torque on the faceplate 6000 Nm engine output 1,1 / 1,1 kW welding current 700 Ampere - Manual height adjustment. - Self-locking gearbox, therefore hardly any pre and after-run at eccentric Load. - Electronic components from Schneider, Siemens and Delta. - Frequency-controlled, stepless speed of the turntable. Bdsdpfx Asfv Ayyshmeh - High stability due to the robust construction. - CE certificate. The D-HBE series comes as a standard version with a cable remote control and a footswitch. Welding power transmission for max.500Ampere.

Condition: new, number 27 Positionen weight 52 kg condition neu 28 mm P-Set 1:27 pieces, 28mm system (15mm), consisting of: Clamps: 5 Sk. 100 / 350mm Stop: 2 pieces 500mm Stop: 2 pieces 150mm Bdsdpfx Ahjgp Dyuomjh Angle: 2 pieces 175 x 175mm Flat angles: 2 pieces. 350 x 250mm Flat angles: 2 pieces 275 x 150mm Eccentric discs 2 pcs. 100mm Quick release bolts: 10 pcs.

Year of construction: 2015, condition: ready for operation (used), 1) Eccentric screw pump Johstadt AFJ 70.1 S, year of manufacture: 2011. 2) Eccentric screw pump Johstadt FJ 70.1 S, year of manufacture: 2015. 3) Eccentric screw pump Stöber/HEW/Netzsch DC30-2061-200-U/EEXF100L/U/NE40B, year of manufacture: 1989. 4) Centrifugal pump Stork CN32-200G1S3L1, year of manufacture: 1997. 5) Centrifugal pump Siemens&Hinsch m.b.H/Loher&Söhne AKHK6101/eA132 MA-U, year of manufacture: 1970. 6) Centrifugal pump with electric motor EMK/SPX EC2-HS160M1-2/CC40-200 R6S2L2. 7) Electric motor Siemens 1LA2 130-2CA60, year of manufacture: 1997. 8) Electric motor VEM. VEM electric motor. 9) Electric motor with gearbox Nord SK 132 S/4-2 TF, SK 33-132S/4-2 TF, year of manufacture: 2011. 10) Blower Gebhardt Ventilatoren KEM 61-0200-4 X-14-11. 11) Side channel pump SERO/HEW SVM 111 K,V,60-2,32 Dex 80L/4K, year of manufacture: 2015. 12) Side channel pump SERO/VEM SVM 111 K,V,60-2,32 kPER 80G4 FDS, year of manufacture: 2013. 13) Electric motor with gearbox Getriebebau Nord SK 132 S/4 TF, SK 472-132 S/4 TF. 14) Electric motor with gearbox Getriebebau Nord SK 25-100 L/4 ED, SK 100 L/4 ED. 15) Electric motor with gearbox Getriebebau Nord SK 100 L/40, SK 25-100 L/40. 16) Side channel pump SERO/HEW SVM 111 K,V,60-2,32 DCEx 80L/Ur, year of manufacture: 2015. 17) Centrifugal fan Hürner-Funken GmbH/MM Antriebstechnik HF R160-17D/FY 71 A-4 T, year of manufacture: 2001. 18) Centrifugal fan Konz Lufttechnik/ABB Motors MPR 351/M2V AD 80 B-2, year of manufacture: 2006. 19) Axial fan Helios HRFD 35/4 TK. 20) Centrifugal pump Bedu CRT 70/3, year of manufacture: 2015. 21) Electric motor with gearbox and magnetic field coupling Nord Drivesystems/Varisco SK 33-132MP/4 TF, V 60-2 STGTRM+X+Y, year of manufacture: 2017. 22) Pneumatic agitator PTM. 23) Pneumatic agitator. 24) Pneumatic agitator WP ARO MRV050A/6150051-14-P. Including various stators for progressive cavity pumps. Documentation available. On-site inspection is possible. Individual sale possible. Bedpfxjv Extbs Ahmedh

Condition: new, functionality: fully functional, Year of construction: 2026, control type: manual, degree of automation: semi-automatic, actuation type: electric, number of rollers: 3, roller (bottom) diameter: 60 mm, roller (top) diameter: 60 mm, side roll diameter: 60 mm, overall weight: 310 kg, total length: 1,300 mm, total width: 700 mm, total height: 1,260 mm, power: 0.75 kW (1.02 HP), input voltage: 400 V, input frequency: 50 Hz, warranty duration: 12 months, Equipment: cone bending device, documentation/manual, emergency stop, foot remote control, hardened rollers, swiveling upper roller, MTP ESR 1020 × 2.0 mm – Electric 3-Roll Sheet Metal Bending Machine PRICE: €1950 NET EXW European delivery available – transport quotation on request. Bedpoz Hx T Rofx Ahmodh The MTP ESR 1020 × 2.0 mm is a robust electrically driven 3-roll sheet metal bending machine designed for accurate rolling of cylindrical components, tubes, sleeves, rings and light conical parts. Its compact footprint, rigid welded frame and hardened steel rolls make it suitable for professional fabrication workshops, maintenance departments and production facilities requiring a reliable machine for regular sheet-metal forming work. MAIN TECHNICAL DATA • Working length: 1020 mm • Maximum sheet thickness: 2.0 mm • Roll diameter: 60 mm • Motor power: 0.75 kW • Power supply: 400 V • Dimensions: 1300 × 700 × 1260 mm • Weight: approx. 310 kg • Number of rolls: 3 • Drive: electric • Condition: brand new MACHINE FEATURES The ESR 1020 × 2.0 mm uses a three-roll system with eccentric pressure adjustment, allowing straightforward positioning of the rolls and controlled forming of the workpiece. The rolls are manufactured from high-grade hardened steel, providing good durability and resistance to wear. The lower and upper rolls are equipped with grooves for rolling rings and wire-type sections. The machine can also be used for cone rolling within its standard adjustment range. As shown in the photographs, the machine features: • heavy-duty welded steel frame, • electric motor with reduction gearbox, • manual handwheels and levers for precise mechanical adjustment, • easy roll-position adjustment, • swing-out / releasable upper-roll arrangement for easier removal of finished cylindrical workpieces, • foot pedal for convenient forward/reverse operation, • emergency stop button, • perimeter safety cord around the working area, • clearly accessible operating controls, • CE marking and safety warning labels. The foot-operated control allows the operator to keep both hands free for positioning and guiding the sheet during the rolling process, improving control when working with larger workpieces. APPLICATIONS Suitable for producing: • cylindrical sheet-metal parts, • tubes and sleeves, • rings, • curved panels, • light conical components, • general fabrication and workshop components. SALES & SUPPORT We provide professional technical advice before purchase and comprehensive after-sales assistance. We can help with machine selection, rolling technology and suitable operating parameters for different materials. Warranty and post-warranty service are available, and we can organise professional transport throughout Poland and the whole of Europe. Brand-new machine with manufacturer’s warranty. Available to order. Please contact us for current delivery time, transport costs, additional photographs, technical information or a personalised commercial quotation.

Year of construction: 1970, condition: ready for operation (used), Throughput capacity milk, cocoa: 600 kg/h, components: Instantizer (main process chamber), F-10 atomizer, Vibroflux eccentric element, steam air heater, air heater, ceiling air distributor, DDMM centrifugal pump, washing sluice, material feed sluice, hopper discharge device, Allgaier tumbler screening machine, Aerzener rotary lobe blower, Haug compressor unit, Gericke vertical conveyor, Amer-glas prefilter with DRI-Pak fine filter, electrical equipment, main wiring diagram, electric hammers, chamber safety system with vacuum monitor, Varimax control system, Clorius temperature controller, Variadyn motor control system, plant has been stored dry for 10 years, completeness of the plant cannot be guaranteed, major components are available, without control cabinet, extensive documentation and spare parts, no known defects, operating hours unknown, an on-site inspection is possible. Bsdpjzghflofx Ahmodh