Used Kmu Mfbs 75 for sale (6,372)

Condition: reconditioned (used), Stock - No.: 2553 1 used, partly overhauled and functionally tested Single-Screw Extruder, equipped with: Material hopper loader Extruder BATTENFELD Typ UNI-EX 1-75-25 B Djdpfeiyyndex Ad Nekl Screw - Ø 75 mm – 25 L/D, Cylinder Air-cooled Extruder-Motor 120 kW – DC ( overhauled ) Screw –speed up to 130 r.p.m. additional Temperature controllers for down-stream equipment Control-Board with melt-pressure sensor / Display. Inspectiuon visist / trial-run shortly by appointment in our workshop Wuppertal Germany possible. We can offer, installed to this extruder: > screen-pack-changer > pelletizing ( strand, hot-face or waterring ) > other equipment Send us your inquiry. More extruder and complete pelletizing lines ex our workshop Wuppertal, send us your inquiry or visit us, you´re welcome

Condition: reconditioned (used), Stock - No.: 2553 1 used, partly overhauled and functionally tested Single-Screw Extruder, equipped with: Material hopper loader Extruder BATTENFELD Typ UNI-EX 1-75-25 B Screw - Ø 75 mm – 25 L/D, Cylinder Air-cooled Extruder-Motor 120 kW – DC ( overhauled ) Screw –speed up to 130 r.p.m. additional Temperature controllers for down-stream equipment Control-Board with melt-pressure sensor / Display. Inspectiuon visist / trial-run shortly by appointment in our workshop Dksdpfx Adeiyynwo Nel Wuppertal Germany possible. We can offer, installed to this extruder: > screen-pack-changer > pelletizing ( strand, hot-face or waterring ) > other equipment Send us your inquiry. More extruder and complete pelletizing lines ex our workshop Wuppertal, send us your inquiry or visit us, you´re welcome

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: 2846, Stock No. 2846 Demonstration line, Compounding Extruder Type Alphatec AD-.S 75 with: Segmented screws, co-rotating, intermeshing screw design Cylinder water/medium cooled/temperature-controlled Throughput up to 1200 kg/h - material-dependent Drive 250 kW - AC 48 L/D R+W safety gear coupling 3x degassing zones, 1x vacuum pump with condensate separator 2x side feeders type ZS-B Siemens Touch HMI control OPTIONAL: > Melt filter/screen changer > pelletizing systems: ST strand, WRG water ring, or UWG underwater pelletizing > Screw configuration according to your requirements > Material dosing/blending : volumetric or gravimetric > Additional accessories Dksdpoi Dtb Asfx Ad Nsl Visit us at our Wuppertal plant. The system is ready for demonstration, test run date with your material after arrangement

Condition: used, Year of construction: 2000, functionality: fully functional, machine/vehicle number: 308, Technical characteristics: ⚙️ Core Specifications Attribute Value Thread Diameter Range: 3 mm to 75 mm Rolling Pressure: 0.5 to 20 tons Max Thread Length (Plunge): 160 mm Max Thread Length (Through): 2000 mm Speed Range: 24 to 114 rpm (8-step gearbox) Tool Diameter: 145 mm to 200 mm Roll Spindle Diameter: 54 mm Dsdpfx Adexx Nuxj Nokl Shaft Distance: 130 mm to 200 mm Machine Dimensions (L×W×H): 1880 (INCLUDING HYDRAULIC UNIT) × 991 × 1270 mm Weight: ~1.6 tons 🧰 Features & Capabilities Variable Rolling Pressure: Adjustable to suit different materials and thread profiles. Heavy-Duty Construction: Built for long-term industrial use with high repeatability. Manual or Semi-Automatic Operation: Depending on configuration and accessories. Machine status: WORKING

Condition: excellent (used), Year of construction: 2006, Single-screw extruder Battenfeld BEX 1-75-30:B with co-extruder BEX 35-30:B Application for PE, PP Year of manufacture 2006 Screw RPM 220 Screw diameter 75 mm Drive Baumüller 205 KW, RPM 2.450 Total output approx. 850 kg/h The extruder was converted to frequency drive by Battenfeld in 2014, new three-phase motor and frequency converter Gearbox was overhauled in July 2024 Dodoug Edkepfx Ad Nekl Condition: it is in very good condition Last application PE pipes Battenfeld co-extruder BEX 1-35-30:B Application PE PIPES Screws RPM 240 Connection value: 69 Kva Drive 35 KW Output approx. 120 kg/h Year of manufacture: 2010 The extruder is my property Location: D-26345 Bockhorn-Grabstede, Bahnhofstr 6 Germany

Condition: used, Year of construction: 2021, gebraucht 2021 9502 Türkei 2100 € 1 Djdpfjwiquqsx Ad Nskl 1050 mm 2 mm 75 mm 1930 mm 700 mm 1160 mm 300 kg MINT CONDITION 3 rolls asymmetric rolls - prebending longitudinal grooves in lower and lateral roll Infeed of the lower roller by a central lever - with gear reduction machine stand user manual in GERMAN orENGLISH

Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, travel distance X-axis: 5,300 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 2,000 mm, spindle speed (max.): 1,800 rpm, table length: 7,000 mm, TECHNICAL DETAILS Travel X-axis: 5,300 mm Travel Y-axis: 1,500 mm Dksdpfx Asy Dg I Ned Nel Travel Z-axis: 2,000 mm Control: HEIDENHAIN TNC 415 B Table size: 7,000 x 1,000 mm Tool holder: SK 50 Spindle speeds: 12.5 - 1,800 rpm Spindle motor: 22 kW Feed rate range: 6 - 10,000 mm/min Rapid traverse: 15 m/min Number of tool changer positions: 24 MACHINE DETAILS Total power requirement: 70 kW Dimensions & Weight Space requirements: approx. 8.7 x 4.7 x 4.1 m Machine weight: approx. 30 t EQUIPMENT Electronic handwheel Automatically swiveling milling head vertical/horizontal 2 x 180° Milling head on the rear axis swivels automatically 72 x 5° Automatic tool changer (ATC 24) Coolant system Extended transverse travel (Y-axis) 1,500 mm Extended vertical travel (Z-axis) 2,000 mm Various maintenance documentation

Condition: used, Year of construction: 2004, functionality: fully functional, Man Roland Uniset 75 578 Cut Off Dkedpoy Nkx Aofx Ad Nsl 3 Towers 4 Reel Stand

Condition: used, mileage: 31,502 km, power: 100 kW (135.96 HP), fuel type: electric, gearing type: automatic, axle configuration: 4x2, wheelbase: 3,280 mm, first registration: 08/2022, color: white, number of seats: 3, Year of construction: 2022, Equipment: ABS, air conditioning, central locking, cruise control, electronic stability program (ESP), immobilizer system, onboard computer, power assisted steering, seat heater, sliding door, = Additional Options and Equipment = Dksdpfx Aeya D Evsd Nsl - Right-hand sliding side door - Attention assist - Automatic dipped beam headlights - Heated exterior mirrors - Bluetooth - Front electric windows - Electrically adjustable exterior mirrors - Driver airbag - Remote central locking - Speed-sensitive power steering - Hill-hold control - Wooden load area - Height-adjustable steering wheel - Air conditioning - Boot lid - Collision mitigation by braking - Multifunction steering wheel - Emergency brake assist - Radio - Radio with DAB - Rain sensor - Tyre pressure monitoring - Seat heating - Lane keeping assist - Immobiliser - Thermal glazing - Fully digital instrument cluster - Partition wall = Further Information = General Information Number of doors: 5 Model range: March 2024 - 2026 Cab type: single Technical Information Torque: 260 Nm Transmission Transmission: 1-speed automatic Performance Maximum speed: 130 km/h Dimensions Length/Height: L3H1 Dimensions (L x W x H): 531 x 192 x 195 cm Weights Unladen weight: 2,028 kg Payload: 1,027 kg Gross vehicle weight: 3,055 kg Maximum towing capacity: 1,000 kg (unbraked 750 kg) Battery Battery ownership: Purchased Battery capacity: 75 kWh Charging connector: Type 2 Fast charging capability: yes Rapid charging connector: Combined Charging System Interior Interior: black Maintenance, History, and Condition APK (Dutch MOT): valid until 08.2026 Number of keys: 2 (2 remote fobs) Product Safety Manufacturer: Oostland Automobielen Wasaweg 22 9723JD GRONINGEN, NL

Condition: used, mileage: 18,217 km, power: 100 kW (135.96 HP), fuel type: electric, gearing type: automatic, axle configuration: 4x2, wheelbase: 3,280 mm, first registration: 08/2024, color: white, number of seats: 6, number of previous owners: 2, Year of construction: 2024, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), fog lights, immobilizer system, onboard computer, parking sensors, power assisted steering, sliding door, = Additional options and equipment = - Rear parking sensors - Right-hand side sliding door - Android Auto - Apple CarPlay - Attention assist - Automatic dipped beam - Heated exterior mirrors - Passenger airbag - Bluetooth hands-free kit - Walk-through bulkhead - Front electric windows - Electrically folding exterior mirrors - Electrically adjustable exterior mirrors - Driver airbag - Remote central locking - Speed-dependent power steering - Tinted glass - Hill-hold control - Wooden load floor - Height-adjustable driver's seat - Height-adjustable steering wheel - Collision mitigation via braking - Front centre armrest - Multifunction steering wheel - Multimedia capability - Fog lights - Emergency brake assist - Radio - Radio with DAB - Rain sensor - Tyre pressure monitoring system - Headlamp assist - Lane keep assist - Immobiliser - Thermal glass - Traffic sign recognition - Connected services - Fully digital instrument cluster - Partition wall = Further information = General information Number of doors: 5 Model range: March 2024 - 2026 Cab type: Double cabin Technical information Torque: 260 Nm Drivetrain Range: 335 km Transmission Djdeyrq Smopfx Ad Njkl Transmission: 1-speed automatic Performance Maximum speed: 130 km/h Dimensions Length/height: L3H1 Dimensions (L x W x H): 533 x 192 x 196 cm Weights Unladen weight: 2,160 kg Payload: 940 kg Gross vehicle weight: 3,100 kg Battery Battery: 75 kWh Charging port: Type 2 Suitable for fast charging: yes Rapid charging connector: Combined Charging System (CCS) Interior Interior: black Consumption Average power consumption: 249 kWh/100 km Maintenance, history, and condition APK (Dutch MOT): valid until 08.2028 Number of keys: 2 (2 remote controls) Warranty Manufacturer's warranty until: 23.08.2026 Product safety Manufacturer: Oostland Automobielen Wasaweg 22 9723JD GRONINGEN, NL

Condition: used, mileage: 219,811 km, power: 137 kW (186.27 HP), first registration: 10/2016, fuel type: diesel, overall weight: 7,490 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 2, loading space volume: 23 m³, loading space length: 4,100 mm, loading space width: 2,450 mm, loading space height: 2,300 mm, Year of construction: 2016, Equipment: ABS, electronic stability program (ESP), soot filter, EuroCargo 75 E 190 Refrigerated Box 4.10 m with 3 rail systems + doors * THERMOKING V-500 MAX in-transit refrigeration * Vehicle No. for customer inquiries: 4625 * Engine type: Euro VI * Lane departure warning system * Emissions sticker (green) * Electronic Stability Program (ESP) * Air suspension on rear axle * Particulate filter * Anti-lock Braking System (ABS) * Two-seater * Power steering * Driver’s seat heating * Exterior mirrors heated and electrically adjustable * Manual transmission * Driver’s seat, air-sprung * Full service history * Wheelbase: 3,100 mm No liability for printing or typographical errors Sale only to commercial customers Subject to prior sale and changes* Alterations, interim sale and errors expressly reserved. Description serves to identify the vehicle and does not represent a warranty in the sense of sales law. Only the description in the purchase contract is binding. * TOP SERVICE + QUALITY * We are happy to provide you with a LEASING-FINANCING-INSTALLMENT PURCHASE offer Warranty insurance available on request through insurer * TÜV / UVV tail lift / tachograph inspection and installation of OBU device possible on site by our partners * Export license plate for 30 days All export documents can be provided upon request * Toll services for Toll-Collect can be booked in-house * Free transfer from Stuttgart Airport or Metzingen (Württ) railway station * TRAIN STATION FOR ARRIVAL: 72555 METZINGEN/WÜRTT. * FOR ENGLISH * Andreas Pittas * Thomas Pittas * Alexander Pittas * Robin Pittas WHATSAPP number * * Dksdpfxeyt Tp Re Ad Njl ---- Visit our website at * Over 200 vehicles in stock at all times

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 2 h, New variable screwcompressor ALMIG Variable XP 75 Controller: Aircontrol Premium Year 2025 Hours: 2 h new condition, available short.(1 week) Technical specifications: type: Variable XP 75 Possible operating pressures of the system: 5 to 13 bar Dedpfxoy Dcp Ao Ad Njkl Quantity delivered at 5 bar : 3.85 to 14.59 m³/min at 6 bar : 3.84 to 14.53 m³/min at 7 bar : 3.83 to 14.48 m³/min at 8 bar : 3.82 to 13.38 m³/min at 9 bar : 3.79 to 12.30 m³/min at 10 bar : 3.76 to 12.23 m³/min at 11 bar : 3.71 to 10.89 m³/min at 12 bar : 3.67 to 10.82 m³/min at 13 bar : 3.58 to 10.32 m³/min Installed power: 75 kW Protection class / Insulation class Drive motor: IP55 / ISO F Operating voltage / frequency: 400 V / 50 Hz Sound pressure level (DIN 45635 T13) : 76 dB (A) Compressed air connection: G 2" Dimensions and weight Length : 2180 mm Width : 1330 mm Height : 1850 mm Weight : 2025 kg Visit our store. We´ve got a lot of compressors and dryers on stock.

Condition: used, Year of construction: 2022, operating hours: 95 h, power: 55 kW (74.78 HP), Equipment: air conditioning, all wheel drive, cabin, IMMEDIATELY AVAILABLE VEHICLE - SALES PRICE INCLUDES DELIVERY COSTS - IF INTERESTED, PLEASE CONTACT OUR SALES TEAM - WE WILL GLADLY PROVIDE YOU WITH A CUSTOMIZED OFFER INCLUDING FINANCING / LEASING / INSURANCE AND ACCESSORIES Subject to prior sale - all information is non-binding. Accuracy and completeness of the details provided here cannot be guaranteed. Warranty and/or liability are excluded. Despite our own checks, deviations from the above description cannot be ruled out. Please note that the subject of any sales agreement will exclusively be the vehicle in its actual condition. Features: Power steering * Front hydraulics * Cabin Dkedsx Ia Ttjpfx Ad Nsl Climate control: Automatic climate control Safety: All-wheel drive

Condition: good (used), Year of construction: 2011, Electric chain hoist, crane, overhead crane, assembly crane Dkedpox E Sq Eefx Ad Nel -Manufacturer: Yale, electric chain hoist -Type CPE 75-1.6 Load capacity 7500 kg -Main stroke: 1.6 m/min -Chain length: 9 m -Transport dimensions: 1200/800/H520 mm -Weight: 235 kg

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, 12 months warranty, demonstration unit, very good condition, only approx. 250 operating hours, immediately available - according to DIN EN 1539 for solvent-based substances - Maximum temperature: 300 °C - Oven chamber: 750 x 750 x 750 mm (W x D x H) - External dimensions: 1510 x 1150 x 2200 mm (W x D x H) - Temperature controller: JUMO dTRON 04 - Permissible solvent quantity max. 19.30 g - Heating capacity: max. 21.78 kW, connected load 22.5 kVA, nominal current 32.6 A - Connection: 400V 3-phase/PE 50Hz - Cable with 63A plug, also available as fixed connection (fuse protection 35 or 50 A required) Dodpfxjiq Uv No Ad Nokl - incl. 1 piece mesh shelf - Weight 550 kg - Documentation Inspection in our warehouse by appointment. Oven, ovens, industrial oven, circulating air oven, chamber circulating air oven, tempering oven, heat oven, drying oven, conditioning oven, paint dryer, solvent oven

Year of construction: 2024, condition: used, For inquiries regarding the crawler, Mr. Herden is available to assist you (by phone). Seppi M. MAX 75 HP / 75 PS / Radio-controlled crawler vehicle / Recovery winch / Seppi M. MICROFORST rc 155 forestry mulcher / Seppi M. H 5 rc 175 mulcher / In stock & immediately available Price for crawler without attachments: €126,190.00 net / €150,166.10 gross Standard specification and features: Dimensions*: - Overall width, undercarriage retracted: 1,650 mm - Overall width, undercarriage extended: 2,450 mm - Depth: 2,600 mm - Height: 1,250 mm - Track length: 1,570 mm - Track width: 230 mm - Cross/longitudinal incline: 55° - Weight (without equipment): 2,200 kg Engine: - Perkins 4-cylinder diesel engine - Output: 55 kW / 75 HP - Torque: 270 Nm at 1,800 rpm - Displacement: 2,200 cc - Cooling with automatic reversing fan (automatic fan cleaning) Drive: Hydraulic system for attachments: - High-flow hydraulic circuit (closed circuit) for attachments (double-acting): - Capacity: 93 l/min max. at 2,750 rpm - Pressure: 380 bar Hydraulic system services: - Low-flow hydraulic circuit for attachments (double-acting): - Capacity: 15 l/min max. at 2,750 rpm - Pressure: 200 bar Vehicle hydraulic system: - Capacity: 154 l/min max. at 2,750 rpm - Max. pressure: 400 bar Undercarriage: - HIGH GRIP: Stability and traction on slopes up to 55° under optimal conditions - Hydraulic adjustment of vehicle width 800 mm (2x400 mm) - AUTO TRACK TENSION: Active automatic track tensioning - Patented track derailment protection - Stability and traction thanks to robust tread and large track contact area Control: - Remote control with graphic display (machine vital data and tilt indicator) - Range: 150 m - Potentiometer for speed control with variable feed from 0 to 100% Lifting gear: - FLOAT: Lifting gear with float position (ground pressure control) Standard equipment: - Vehicle with roll bar - LED headlights - Internal components protected by heavy-duty steel covers - Skid plate to protect the engine and hydraulics - Color: anthracite RAL7021 | red RAL3020 OPT 573 Bio hydraulic oil OPT 221 Rear forestry protection with recovery winch Optional: SEPPI M. MICROFORST rc 155 – hydraulic forestry mulcher Price: €23,130.00 net / €27,524.70 gross Optional: SEPPI M. H5 rc 175 – hydraulic mulcher Price: €13,770.00 net / €16,386.30 gross We have a very large selection of various Seppi M. products in stock and immediately available! Mr. Herden (phone) will be glad to assist you. We are happy to provide you with a financing offer upon request. Dkodpfxeyfrpgo Ad Nel We are an official Seppi M. sales and service partner. We supply the complete Seppi M. product range! Subject to error and prior sale! Rental possible = Further information = New: Yes For more information, please contact Tobias Ebert.

Condition: good (used), Cardan shaft, universal joint, universal joint with flange, drive shaft, cardan joint -Cardan shaft: with universal joint Djdpoyzfzvefx Ad Nskl -Type: Length 250 mm -Flange Ø 75 mm -Bolt circle: Ø 62 x 6 mm -Quantity: 2x cardan shafts available -Price: per piece -Dimensions: Ø 75 x 250 mm -Weight: 2.3 kg/pc.

Condition: good (used), Cardan shaft, universal joint, universal joint with flange, drive shaft, cardan joint -Cardan shaft: with universal joint -Type: Length 240 mm -Flange: Ø 75 mm -Bolt circle: Ø 62 x 6 mm -Dimensions: 240/75/H75 mm -Weight: 2.2 kg Dodpfxsyzfxhe Ad Nskl

Condition: used, mileage: 990,000 km, power: 130 kW (176.75 HP), first registration: 02/2008, fuel type: diesel, empty load weight: 4,090 kg, maximum load weight: 3,400 kg, overall weight: 7,490 kg, tire size: 205/75 R17,5, brakes: other, color: white, gearing type: automatic, emission class: euro5, suspension: steel-air, total length: 24,500 mm, total width: 24,500 mm, total height: 59,000 mm, Year of construction: 2008, front tire size: 205/75 R17,5, Equipment: ABS, air conditioning, cruise control, differential lock, ABS, work lights, electrically adjustable and heated exterior mirrors, roof hatch, differential lock, short cab (local haulage), air-suspended driver seat, leaf-air suspension, automatic transmission, lift and lower function, standard air conditioning, single-stage constant throttle, Euro 5 engine, entertainment: radio/CD, cruise control, rear wall viewing window, dual passenger seat, vehicle is not drivable, air compressor defective, sold as a parts donor for dismantling! Dkodpfx Adsyzkclj Nsl

Condition: used, mileage: 999,999 km, power: 130 kW (176.75 HP), first registration: 02/2008, fuel type: diesel, empty load weight: 4,090 kg, maximum load weight: 3,400 kg, overall weight: 7,490 kg, tire size: 205/75 R17,5, brakes: other, color: white, gearing type: automatic, emission class: euro5, suspension: steel-air, total length: 24,500 mm, total width: 24,500 mm, total height: 59,000 mm, Year of construction: 2008, front tire size: 205/75 R17,5, Equipment: ABS, air conditioning, cruise control, differential lock, ABS, work lights, electrically adjustable and heated exterior mirrors, roof hatch, differential lock, short cab (for local distribution), air-suspended driver's seat, leaf-air suspension, automatic transmission, lift and lower function, climate control: standard, single-stage constant throttle, Euro 5 engine, entertainment: radio/CD, cruise control, rear wall inspection window, double passenger seat, hydraulically height-adjustable fifth wheel operable from the driver's seat, vehicle is not drivable, air compressor defective, offered as a parts donor for dismantling! Dedpfx Adoyzkcfs Nokl

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 4600 € 1050 mm 2 mm 75 mm 1.5 kW 1610 mm 700 mm 1160 mm 385 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor lateral roll adjustable by ratchet lever longitudinal grooves in lower and lateral roll tiltable upper roll Dedpfx Ajy Dvlked Nskl right / left rotation with double foot switch user manual in GERMAN or ENGLISH OPTION (PRICE ON REQUEST): hardened rolls

Year of construction: 2024, condition: like new (used), functionality: fully functional, Replacement shafts for Lindner Urraco 75 for sale Djdpfxjyzdrgj Ad Nokl For sale: high-quality replacement shafts suitable for a Lindner Urraco 75 shredder. - Application area: waste wood, domestic and commercial waste - Condition: as new / excellent condition - Version: Original Lindner shafts, not aftermarket replicas The shafts are immediately ready for use. Please contact us if interested.

Condition: used, No. 3264 Complete sawmill Möhringer / Paul Used, still connected to power until 30.06.26 Consisting of: - Log crosscut table with driven tapered rollers Length measurement Hecht with remote-controlled photoelectric sensors - 1 cross conveyor to the frame saw, 7000 x 5500 mm LW Cam chains in mint condition - 1 cross conveyor, 3800 x 4000 mm LW - 1 roller conveyor in front of the frame saw, length 12400 mm, roller width 1400 mm With hydraulic lowering and lifting for sawn timber, cross-discharge with 2 flap gates - Quick-clamping frame carriage EWD with auxiliary carriage - 1 auxiliary conveyor for log feeding in front of the frame - Root reducer Möhringer - Frame saw Möhringer B 75-55 Multi-BV, year of construction 1994 Passage 700 mm, stroke 550 mm, saw blades hydraulically adjustable, conveyor belt, log loading device with adjustable laser, round timber measurement Hecht, clamps Jansen, hooks, 60 saw blades, adjustment gauge - Powered splitting wedge with chain bed Möhringer 230-292, year of construction 1994 With pre-cutting, photoelectric sensors, and laser for adjustment - 1 roller conveyor 4000 x 1400 mm LW, with grooved rollers, cross-feed with pneumatic cylinders Dkedpfx Aoyzr Tfjd Nsl - 1 S-conveyor with storage 3500 x 4000 mm LW, flights Albert made of square tube - 1 S-conveyor 3000 x 5500 mm LW, motor with adjustable slip clutch, function monitoring, drive elements made of angle iron - 1 under-table cross-cut saw Paul 15 AO, year of construction 1992 - 1 double edger Paul KME 2 / 750 R, year of construction 1988 With splinter separator, right-hand side unit electrically adjustable, through-feed cross-cut unit, length sorting system, preselection programs Österle - 1 conveyor belt 7400 x 400 mm LW - 1 conveyor belt 4000 x 400 mm LW - 1 conveyor belt 3000 x 500 mm LW - 1 trough conveyor approx. 6500 x 500 mm LW, ascending, for sawdust - 1 trough conveyor HOLTEC approx. 6500 x 500 mm LW, ascending, for wood chips - 1 trough conveyor HOLTEC, horizontal, with left and right rotation as a distributor over the boxes - Drum chipper HAAS, feed width 600 mm, feed height 150 mm, with vibrating chute - Frame saw sharpening machine OPL - Saw blade tooth setting machine VOLLMER GSA, year of construction 1996 - Frame saw sharpening machine VOLLMER (needs minor repairs, push cylinder bent) Sale on behalf of customer, ex location near 34125 Kassel, without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipment Terms of delivery: ex location

Year of construction: 1979, condition: reconditioned (used), Machinetype: wire nail press Dksdpfx Ash Hnqtod Njl Make: WAFIOS Type: N75 Constr. year: 1979 diameter range: 2,0-3,8 mm nail length: 20-80 mm output – pieces/min: 440

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, travel distance X-axis: 300 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 300 mm, workpiece weight (max.): 500 kg, total height: 2,400 mm, total width: 1,600 mm, total length: 1,500 mm, table width: 500 mm, type of input current: three-phase, distance table to quill: 550 mm, workpiece length (max.): 800 mm, workpiece width (max.): 480 mm, workpiece height (max.): 250 mm, control cabinet length: 880 mm, control cabinet width: 700 mm, control cabinet height: 1,860 mm, input voltage: 400 V, overall weight: 1,240 kg, tank capacity: 280 l, Equipment: documentation/manual, Sinker EDM Machine CM323Z Technical Data Maximum table travel (X x Y): 300 x 200 mm Maximum head travel (Z): 300 mm Orbital movement (deflection) U-V travel: ± 5 mm Distance head/table: 250 to 550 mm Table size: 500 x 350 mm Maximum workpiece weight: 500 kg Work tank dimensions: 820 x 500 x 300 mm Dielectric tank volume: 280 l Maximum electrode weight: 15 kg Smooth linear guides Glass scale encoders on all 3 axes Required space (W x D x H): approx. 1600 x 1500 x 2400 mm Weight: 1000 kg Generator / Power Supply Unit 75 EZ Technical Data Dedpfx Adey A If To Nekl Maximum machining current: 75 A Power consumption: 5 kVA Maximum possible feed rate: 550 mm³/min Achievable surface finish: 0.45 µm/Ra Electrode wear rate: 0.2 % Required space (W x D x H): approx. 700 x 880 x 1860 mm Weight: 240 kg Additional options included: Orbital and Z-axis deflection system – CNC controlled. Programmable Z-axis allows for both roughing and finishing in a single operation; thread eroding is also possible. Fire extinguisher Permanent magnetic chuck 150 x 300 mm Rapid tank filling system Safety switch for tank door Manual quick-change chuck Included accessories: Quick-change system with approx. 20 electrode holders Electrode materials: copper and graphite Drill chuck, collets Tool cabinet Dielectric fluid Operator training at our facility in 1110 Vienna included The machine has rarely been used (1,083 operating hours) and is therefore in very good condition, and can be demonstrated under power. Inspection possible during our business hours or by appointment. Sale due to upcoming retirement.