Used Knürr-Heinzinger Phn 1200-4 for sale (62,094)

Condition: used, maximum load weight: 44,980 kg, overall weight: 58,000 kg, axle configuration: > 3 axles, first registration: 09/2024, next inspection (TÜV): 09/2025, total width: 2,550 mm, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Excerpt from the equipment list. Complete equipment list available upon request. Chassis, bent * Special steel frame made of high-strength fine-grain steels, electrically welded at the joints, well-dimensioned outer frame * 4-axle arrangement. Wheel protection above the axles with spray mist suppression * All steel parts sandblasted * Lateral impact protection made of anodized aluminum mounted * Increased point load of approx. 30,000 kg over approx. 4,000 mm * Special design in the bent area for maximum low-bed length in combination with AluLeg outrigger supports instead of telescopic outrigger winches, max. rear swivel radius of the tractor unit approx. 2,100 mm Special superstructure with rear beam extension * Self-supporting aluminum roof beam / profile approx. 120 x 100 mm, sliding tarpaulin with plastic flaps * Rear beams extendable to approx. 4,200 mm * Three sliding beams per side with rubber cord relief * Additional center beam locking in the roof beam and parking position, by means of a pull cable and spring latch * Lifting roof mechanically adjustable, lifting height approx. 400 mm, can be operated on both sides or on one side, without opening the opposite side and the doors * Additional height adjustment of approx. 480 mm in approx. 40 mm increments with height adjustment in the beams * Front overhang on the front wall for operation under tarpaulin up to a total height of approx. 4,400 mm * Four rows of stackable approx. 150 mm aluminum slats on the side, bottom 450 mm pockets, above 4 rows of single pockets * Only 3 rows of insert slats in the upper bed. Spacing between slats evenly distributed Floor * Approx. 27 mm special water-resistant glued beech plywood, rough surface * Steel sheet in the wheel arch area * Forklift truck accessible according to DIN standard * Outer frame flush with the surface Brakes * WABCO compressed air brake system with EBS according to EC standard 71/320 EEC including PREV (parking release safety valve) * Spring brake cylinders as parking brake * Wabco Smart Board with odometer and aggregate load indicator Axles Iedpjlthgujfx An Isbc * 4 x 10,000 kg SAF/Sauer with drum brakes in low-loader design * Air suspension with lifting and lowering device, total stroke approx. 230 mm * Third and fourth axles as friction-jointed trailing axles with electric and mechanical lock Twin tires * 235/75 R 17.5, -16-ply, incl. E-wheel holder. without E-wheel Paint finish * Chassis in RAL 3002 red, solid color * Center beams, axles coated with KTL black * Corner beams in hot-dip galvanized design * Plastic parts black * Hot-dip galvanized parts unpainted * Rims in factory silver * Superstructure in RAL color, solid color Special equipment incl. * Air suspension in ECAS design, operated on the semi-trailer * Overwidth signs front and rear in zinc-plated, steplessly telescopic design with attached warning lights including socket for rotating beacons (small panels) * Sliding tarpaulin cover locking additionally from the outside * 4 beam adapters for special outer frame profile, to lock the center beams as desired * PVC sliding tarpaulin, color similar: RAL 9006 silver * Roof tarpaulin translucent, in overwidth and overheight design, flat hooks, tarpaulin folds, closures with pawl lock /OCS * Telescopic socket for rotating beacon including beacon on the rear left * Outer frame for machine transport with app

Condition: used, mileage: 257,600 km, power: 302 kW (410.61 HP), first registration: 02/2019, fuel type: diesel, empty load weight: 14,875 kg, maximum load weight: 11,125 kg, overall weight: 26,000 kg, axle configuration: 6x4, wheelbase: 4,800 mm, brakes: retarder, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel, loading space length: 6,800 mm, loading space height: 800 mm, Equipment: ABS, air conditioning, crane, cruise control, differential lock, low noise, onboard computer, soot filter, Scania P410 6x4 XT flatbed truck with crane Registration date: 2/2019 257,600 km with documentation Euro 6 emission class Powerful 410 hp engine with 12,742 cc displacement Short cab Automatic transmission Retarder Air conditioning Trailer coupling prepared 6x4 axle configuration Weight variant 29,000 kg Axle loads 8,000 kg / 10,500 kg / 10,500 kg Leaf spring suspension Tires 13 R22.5, approximately 70% tread Wheelbase 4800 mm Flatbed length 6800 mm Side board height 800 mm Unladen weight 14,875 kg Crane: Hiab Hi-Duo 188-4 Year of manufacture: 2018 Operating hours: 840 Radio remote control Including pallet forks 4 hydraulic extensions 3.0 m / 5300 kg 4.50 m / 3600 kg 6.30 m / 2460 kg 8.30 m / 1780 kg 10.30 m / 1400 kg 12.40 m / 1140 kg Hook height approximately 16 meters Ibedpfx Ansz Sumre Ijc The vehicle is from a single owner and is in very good condition. Export/net price: 99,900 euros All information without guarantee, errors and omissions excepted.

Condition: new, Year of construction: 2026, Panel Saw Holzkraft / SCM minimax si 4 - 400 / 32 M A With tilting saw blade and sliding table made of anodized aluminium Item number: 5504933 Brand: Holzkraft TECHNICAL DATA Dimensions and Weights Weight (net): approx. 690 kg Dust Extraction Extraction port diameter: 120 mm Saw blade guard extraction port diameter: 80 mm Ibedpfxoxw N N Hj An Ijc Electrical Data Connection voltage: 400 V Mains frequency: 50 Hz Scoring motor power: 0.65 kW Output power (main motor): 7.0 kW Rated duty cycle (main drive): S6 Duty cycle (main drive): 40% Sliding Table and Worktable Sliding table length: 3200 mm Sliding table width: 360 mm Sliding table height: 175 mm Table length: 1000 mm Table width: 560 mm Table height: 900 mm Saw Unit Cutting width with rip fence: 900 mm Max. crosscut width left of blade: 3200 mm Edging length: 3200 mm Saw blade tilting range: 90 - 46° Max. cutting height at 90°: 136 mm Max. cutting height at 45°: 97 mm Note max. cutting height: independent of scorer Saw blade diameter: 400 mm Note saw blade diameter: independent of scorer Saw blade speed: 3500/5000 rpm Scoring Unit Scoring blade diameter: 120 mm Scoring blade speed: 9200 rpm EQUIPMENT Scoring unit with separate scoring motor Anodised aluminium sliding table Handle for sliding table On/off switch on sliding table for main and scoring blade motors Edging frame Material roller on edging frame Rip fence with round bar guidance Stops: two professional folding stops Edging shoe Excenter clamp Table extension Table width extension Pendulum-type saw blade guard Motorised height adjustment and tilt of saw unit, digital tilt angle display Location: ex stock 54634 Bitburg - immediately available -

Year of construction: 2026, condition: new, Sandblasting cabinets for clean blasting operations without contaminating the work environment. Suitable for various blasting media, e.g., quartz, glass beads, plastic beads, etc. Ideal for cleaning, derusting, or removing paint from metal parts of all kinds, e.g., engine parts, fittings, signs, housings, rims, hinges. High-quality latex work gloves are securely attached to the housing. A viewing window with an attached protective film provides optimal visibility and work safety during workpiece processing. Dust-free operation due to seals around the lid and door frame. A sturdy support grid allows workpieces to be placed inside the cabinet. With a drain opening for changing the blasting media. Suction pipe for the blasting media attached to the bottom of the collection container. With a compressed air connection on the outside. Very large, upward-opening front flap with gas springs for quick and easy loading and unloading. Integrated extraction system with a replaceable air filter. Blasting gun without finger trigger – airflow is controlled via a foot pedal. 4 fluorescent tubes (230 volts) in a separate housing with a protective cover and replaceable protective film, including 5 replacement films. 2 separate switches for extraction and cabinet lighting. Adjustment of the working pressure via a pressure regulator with a pressure gauge. Crossbars on the base allow for easy transport with a pallet truck. Scope of delivery: High-quality blasting gun with a ceramic nozzle. 4 ceramic nozzles (4 / 5 / 6 / 7 mm). Includes 5 replacement films for the viewing window. Technical data Isdpfecqm Rwjx An Ijbc Volume of work cabin: 825 l Air consumption: 400 - 800 l/min Working pressure: 3.4 - 8.0 bar Compressed air connection: 3/8" Blasting media particle size: 0.42 - 0.125 mm Internal dimensions: 1160 x 870 x 850 mm External dimensions: 1180 x 900 x 1760 mm Weight Max. working pressure: 8.6 bar Location: Arriving at warehouse 54634 Bitburg.

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 9,866 h, load capacity: 1,600 kg, lifting height: 4,640 mm, free lift: 1,630 mm, fuel type: electric, mast type: triplex, construction height: 2,090 mm, fork carriage width: 980 mm, fork length: 1,200 mm, empty load weight: 3,333 kg, total length: 2,050 mm, drive type: Elektro, construction width: 1,080 mm, Electric 4-wheel forklift Load center: 500 ISO class: FEM 2 A Mast type: Triplex Transmission: AC Technical condition: good Front tire type: Superelastic Front tire size: 2 x 18x7-8 Front tire condition: 80 - 100% Rear tire type: Superelastic Rear tire size: 2 x 16x6-8 Rear tire condition: 20 - 40% Battery voltage: 48V Battery capacity: 625Ah Battery year of manufacture: 2017 Additional single hydraulic circuit, integrated side shift, load guard, blue spot, drive-in operator protection roof, 2 front work lights, 2 rear work lights. Isdpfx Aoz S Sxfon Iebc

Year of construction: 2007, condition: good (used), fuel type: electric, Golf car CLUBCAR PRECEDENT, 4-seater golf cart, 2007, with charger. A video can be sent via WhatsApp. We have a continuous stock; see our website. Ibedpfxsz Rvftj An Ioc Prices are quoted ex works Nuland. Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. All our deliveries are offered at trade prices in AS-IS condition, without guarantees (see our general terms and conditions). You can make a non-binding appointment for a viewing and/or test drive. Please call beforehand, as we are not always on site. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: used, axle configuration: > 3 axles, first registration: 12/2005, total length: 12,590 mm, total width: 2,500 mm, suspension: air, tire size: 385/55 R 22.5, wheelbase: 9,860 mm, Year of construction: 2005, Equipment: ABS, = Additional Options and Accessories = - Lift axle Ibedpfoz R Ditjx An Isc - Air suspension = Further Information = Axle configuration Tire size: 385/55 R 22.5 Axle brand: BPW Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Tire tread depth left: 45%; Tire tread depth right: 45% Rear axle 2: Steerable; Tire tread depth left: 30%; Tire tread depth right: 30% Rear axle 3: Tire tread depth left: 60%; Tire tread depth right: 60% Rear axle 4: Tire tread depth left: 60%; Tire tread depth right: 60% Weights Unladen weight: 7,500 kg Payload: 45,500 kg GVW: 53,000 kg Condition Damage: none Identification License plate: OJ-17-DH

Condition: new, functionality: fully functional, machine/vehicle number: CPD25A4800NEU2, Year of construction: 2025, load capacity: 2,500 kg, lifting height: 4,800 mm, free lift: 1,180 mm, mast type: triplex, construction height: 2,225 mm, power: 15 kW (20.39 HP), fork length: 1,200 mm, empty load weight: 4,220 kg, total length: 2,605 mm, drive type: Lithium-Ionen, construction width: 1,163 mm, Electric 4-wheel forklift Chassis number: CPD25A4800NEU2 Load center: 500 ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Triplex Ibodpsy Upzajfx An Iec Condition: New Technical condition: New Front tire type: Non-marking Front tire condition: New Rear tire type: Non-marking Rear tire condition: New Battery voltage: 76V Battery capacity: 280Ah Battery type: Lithium-ion Battery year of manufacture: 2025 Battery condition: New Side shifter, fork positioner, 3rd valve, 4th valve, rear work light, front work light, heater, full cab, CE certificate, safety light, lithium-ion technology, interior mirror, exterior mirror, windshield wiper, LED, - Electrically adjustable fingertip controls for height adjustment - Blue Spot

Condition: new, Year of construction: 2022, 57 rm. Wide span shelving 60 cm deep , Workshop shelving , Storage shelving , Large shelving , Manual storage , Shelving , Small parts storage , Ibedpfoz Sk Hcex An Ioc Data : - Height : approx. 200 cm - Depth : approx. 60 cm - Length : approx. 57 running meters Shelf offer consisting of: - 031 x frame approx. 200 x 60 cm, disassembled. - 240 x traverse approx. 185 cm. - 120 x support shelf approx. 184.5 x 59.5 cm. - Incl. safety pins - Model : BLT , Type WR20/60 - Load: 400 kg shelf load, with evenly distributed load. - Levels: 4 x storage levels. - Chipboard, natural. - Stand blue. - New from stock. - Other quantities available! We can pre-assemble the frames for a small surcharge of 6€/net per piece. -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price : 5885,00 € net plus legally valid VAT. You will receive an invoice with VAT shown. Transportation : On request, delivery is carried out by our partner forwarding company, the costs for this depend on the zip code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: good (used), mileage: 356,000 km, power: 324 kW (440.52 HP), first registration: 06/2012, fuel type: diesel, axle configuration: 8x4, fuel: diesel, driver cabin: sleeper cab, emission class: euro5, loading space length: 7,000 mm, Year of construction: 2012, operating hours: 1 h, Equipment: air conditioning, central locking, electric window regulation, onboard computer, trailer coupling, = Additional options and accessories = - Coupling - Heater Iodpfszqc Tlox An Ijbc - PTO - Radio/Cd/Audio system - Rotating beacon - Spotlights - Toolbox - Visor = More information = Transmission: Automaat Front axle: Steering Rear axle 1: Lift axle; Steering Empty weight: 22.440 kg Carrying capacity: 10.560 kg GVW: 32.000 kg CE mark: yes Technical condition: good Visual appearance: good

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 6,605 h, load capacity: 6,000 kg, lifting height: 6,200 mm, free lift: 1,500 mm, fuel type: electric, mast type: triplex, drive type: Elektro, Electric 4-wheel forklift Load centre: 600 mm ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Triplex Ibsdpfsz Svmtsx An Iec Technical condition: very good Front tyres type: superelastic Front tyres condition: 80 - 100% Rear tyres type: superelastic Rear tyres condition: 80 - 100% Description: The vehicle undergoes a UVV safety inspection. Prior to delivery, the forklift receives a service and will be cleaned. Upon request, the machine can be newly painted. 3rd valve, 4th valve, rear working light, front working light, heater, full cabin, full free lift, scale,

Condition: good (used), color: grey, lifting height: 27,000 mm, Year of manufacture: 2017 Operating hours: 1.849 Field of application: Construction CE mark: yes Technical condition: good Visual appearance: good Please contact Vink Machinery for more information Iedpek Aaafefx An Iobc Bocker AHK 27/1200 Easyline * 2017 * 1849 working hours * Petrol * 27 meters hook height * 20 meters horizontal range * 1200 kg lifting capacity * Wheel drive * Remote control * Incl. documents

Condition: good (used), operating hours: 7,931 h, lifting height: 7,850 mm, free lift: 1,920 mm, fuel type: electric, fork length: 990 mm, total height: 2,740 mm, total length: 2,500 mm, total width: 1,200 mm, color: other, Year of manufacture: 2018 Year of construction: 2018 Ibjdpfxoydpris An Isc Lifting capacity: 2.000 kg CE mark: yes Technical condition: good Visual appearance: good Condition CE type: CE Flexi Bendi – Year of construction 2018 – 7921 hours 7.85 meter lifting height – Electric narrow aisle truck with sideshift Are you looking for an efficient and compact narrow aisle truck for intensive warehouse use? This Flexi Bendi from 2018 with 7921 hours is equipped with a powerful 48V / 775 Ah battery and a Quattro mast. Thanks to the small turning circle, sideshift and low drive-through height of only 1.92 meters, this truck is perfectly suited for use in low and narrow aisles. The lifting height is 7.85 meters and the lifting capacity is 2000 kg. The machine is in good condition and is CE certified. Specifications: Year of construction: 2018 Hours: 7921 hours Battery: 48V / 775 Ah Lifting height: 7.85 meters Clearance height: 1.92 meters Mast: Quattro Lifting capacity: 2000 kg Drive: 4x2 Attachments: Sideshift Weight: 5,645 kg CE certified Price excluding VAT For more pictures and videos please visit our website. Contact us for availability or a viewing.

Condition: new, Year of construction: 2020, Cantilever rack NEW Data : - H : approx. 416 cm - D : approx. 137 cm - L : approx. 402 cm - Cantilever arms : approx. 120 cm - Axial dimension : 131 cm - NEW GOODS immediately from stock. - 500 kg load per arm - 2250 kg load per upright - Uprights in hot-dip galvanized. - Cantilever arms in hot-dip galvanized. - Arms are bolted. - Arms adjustable in 100 mm increments. - Levels: Base + 3 storage levels (4 storage levels) Shelf consists of : - 04 x uprights, incl. base approx. 416 cm made of IPE160. - 12 x cantilever arms approx. 120 cm made of IPE 80 - incl. all necessary connecting elements and screws. Why BLT cantilever racking ? - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load-bearing capacities of the uprights and cantilever arms are statically verifiable at 100% load. - All shelving systems are supplied in a hot-dip galvanized version. They can therefore be installed both indoors and outdoors and do not rust like painted systems. Consistent appearance for many years. - We use the legally prescribed hot-dip galvanized screw fittings in accordance with DIN EN 15048-1 - Long after-sales guarantee - The upright foot and upright back are welded together, providing additional safety and short assembly times, as the feet do not have to be bolted to the upright back. Iodpfx Anjz Syp Es Iebc - Bracing made of angle steel, so no adjustment with turnbuckles necessary. This shortens the assembly time. - No slotted hole system, therefore no weakening of the upright profile. Price : 2578,00 € net + statutory value added tax. You will receive an invoice with VAT shown. Accessories such as ground anchors, collision protection etc. can also be purchased from us. Transportation : The delivery is carried out on request by our partner forwarding agency, the costs depend on the postal code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: new, fuel type: diesel, motor manufacturer: Perkins 1206J-E70TTAG, General information Year of manufacture: 2026 Ibjdpfx Asx S Umvsn Isc Field of application: Construction Weights Empty weight: 3.651 kg Functional Generator capacity: 200 kVA Dimensions of cargo space: 409 x 142 x 237 cm CE mark: yes Other information Fuel consumption: 32.4 Liter / Hour at 75% Load Generator: FG WILSON LL5114F Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Emission level: Stage V / Tier IV final Water tank volume: 822 l Production country: CN Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank

Condition: used, total length: 2,680 mm, total width: 1,200 mm, total height: 2,200 mm, Year of manufacture: 2001 Colour: Grey Empty weight: 950 kg Price: On request Table milling machine Hofmann TFS 1200 Serial no. 127-01204 Year of construction 2001 7.8kW, 16amp, 400V 45 degree tilt adjustable. Aigner guide Feeder - Year: 2001 - Serial number: 127-01204 - Main motor power [kW]: 7.8 - Spindle diameter [mm]: 40 - Table length [mm]: 2680 - Table width [mm]: 450 - Tiltable spindle: Automatic Ibsdpfx Aswl I E Eon Isc - └ Min. tiltability [°]: 0 - └ Max. tiltability [°]: 45 - Feeding device present: Yes - Brand: Masterwood - Type: Euromeo - Number of wheels [pcs]: 4 - Number of speeds: 2 - Guide present: Yes - Brand: Aigner - Min. spindle speed [rpm]: 3000 - Spindle speed control: Incremental - Transport dimensions: 2680mm x 1200mm x 2200mm (l x w x h) - Transport weight [kg]: 950kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: new, Year of construction: 2022, 9.56 linear meters Wide Span Rack, 80 cm Deep Specifications: - Height: approx. 200 cm - Depth: approx. 80 cm - Length: approx. 9.56 linear meters Rack offer includes: - 06 x frames approx. 200 x 60 cm, disassembled - 40 x crossbeams approx. 185 cm - 20 x shelf panels approx. 184.5 x 79.5 cm - 40 x cross braces (approx. 80 cm, galvanized) - Includes locking pins - Model: BLT, Type WR20/80 - Load capacity: 400 kg per shelf level, with evenly distributed load - Levels: 4 storage levels - Chipboard shelves, natural finish - Uprights painted blue - New stock, available from warehouse - Other quantities available on request Pre-assembly of the frames can be carried out by us for a small additional charge of €6 net per unit. Delivery is available at a favorable rate upon request. -- IMMEDIATELY AVAILABLE IN MULTIPLE UNITS -- Price: €1,242.00 net plus legally applicable VAT You will receive an invoice with VAT shown separately. Shipping: Delivery by our partner shipping company is available on request; costs are based on your postal code. Assembly: Our trained staff is available to assist with professional assembly and disassembly of your facility if required. Isdsz Sk Igepfx An Ijbc Our recommendation: Let us know your requirements... We are happy to support you throughout your project—from planning and ordering to installation.

Condition: new, machine/vehicle number: 834969 001, General information Year of manufacture: 2025 Field of application: Construction Weights Empty weight: 1.574 kg Functional Generator capacity: 825 kVA Dimensions of cargo space: 137 x 101 x 79 cm CE mark: yes Condition General condition: very good Technical condition: very good Visual appearance: very good Ibsdpfxswvdwlo An Ioc Other information Generator: TAL-A49 Frequency: 50 Voltage: 400 Additional information Please contact Team DPX for more information

Condition: used, STÄUBLI SCARA industrial robot with CS9 controller TS2-40 4-axis SCARA robot for highly precise pick & place, assembly, and automation tasks For sale is a used SCARA industrial robot from the manufacturer Stäubli, including a CS9 controller. The robot system is ideally suited for fast pick & place applications, assembly, packaging, handling, as well as laboratory and automation tasks. The complete system, including controller, original robot connection cable, and accessories as shown in the pictures, will be delivered. Technical data: Ibsdpfozlq E Sjx An Isc Manufacturer: Stäubli Faverges SCA, France Model: TS2-40 Robot type: SCARA, 4 axes Robot year of manufacture: 03/2023 Controller year of manufacture: 03/2023 Controller: CS9-TS2-40 Reach: 460 mm Rated payload: 2.4 kg Max. payload: 8.4 kg Robot weight: 38 kg Controller weight: 30 kg Total weight: approx. 68 kg Repeatability XY: ±0.01 mm Repeatability Z: ±0.004 mm Repeatability Rz: ±0.002° Controller: CS9 rack controller VAL 3 activated PROFINET Device REST API integrated Programmable robot controller Connections: Controller power supply: 1 × 230 VAC, 50/60 Hz Power consumption: 1700 VA PROFINET Ethernet Digital inputs/outputs Pneumatic connections on the robot Equipment: Stäubli TS2-40 SCARA robot CS9-TS2-40 controller Original robot connection cable (robot ↔ controller) End-of-arm tooling mounting installed Original documentation Accessories as shown in the pictures Application areas: Pick & place Assembly automation Electronics manufacturing Laboratory automation Packaging automation Machine loading Quality assurance Industry 4.0 applications Scope of delivery: Stäubli TS2-40 SCARA robot CS9-TS2-40 controller Original robot connection cable (robot ↔ controller) End-of-arm tooling Accessories as shown in the pictures Condition: Used Year of manufacture 2023. Optical condition as shown in the pictures. System startup and information menus have been tested. Robot system including controller. A teach pendant is not included in the scope of delivery. The table shown in the photos, as well as any other items not explicitly mentioned, are not included in the sale. Shipping by freight forwarder is possible. Subject to change, errors and prior sale. We will be happy to answer any further questions by telephone or e-mail.

Condition: used, RS Simulators Type: KKM 110/45 Manufacturer: RS-Simulators, water-cooled Climate chamber 110 m³ incl. condenser The KKM 110/45 type belongs to the TKM/KKM modular design of RS-Simulators – i.e., a modular climate chamber that is assembled on-site. This design offers: Modularity: Individual segments are pre-assembled and installed at the customer's site. This allows for uncomplicated retrofitting (more depth or additional modules) as well as later relocation. Technical data of the climate chamber: Manufacturer: RS-Simulators Prüf- und Messtechnik GmbH Type: KKM 110/45 External dimensions: 6200 x 9400 x 3400 (W x D x H in mm) incl. technical attachments Internal dimensions: 5900 x 7000 x 2960 (W x D x H in mm) Chamber door (double-leaf) 3600 x 2930 (W x H in mm) Personnel door (single-leaf) on side wall 1880 x 900 (H x W in mm) Feedthroughs: 8 x Ø120 mm (4x left & 4x right) Windows: 1x (460 x 550 mm) in the front chamber door, heated 1x (1260 x 1000 mm) in the left side wall, heated Temperature range: -40°C to +120°C Ibodpfx Anezizlde Isc Time deviation: ± 0.8K – 1.5K according to DIN 50011 with empty test chamber Humidity range: 10% to 95% Humidity tolerance: +/- 5.0% Refrigerant: 2x R404A 52kg 2x R23 17kg Temperature change rate: Heating: 1.0 K/min Cooling: 1.0 K/min Max. surface load 500 kg / m² Electrical data: Voltage: 3x400V/N/PE Current: 340A Weight: approx. 2,000 kg For your safety as a buyer, please note the following information! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerants 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Trumpf TRUMPF TruDisk 6602 (4 C) High-performance disk laser with up to 6.6 kW   Type: TruDisk 6602 (4 C)   The TRUMPF TruDisk 6602 (4C) is a high-performance disk laser with approximately 6.6 kW continuous power – perfectly suited for welding, cutting, and surface treatment processes on metals such as steel, aluminum, copper, etc.   System type: TruDisk 6602 (4 C) Manufacturer: TRUMPF Laser GmbH + Co. KG Year of manufacture: November 2012 Drawing number: 20-10-02-A5   No further testing was carried out in-house. The operating hours could not be read. The laser ran perfectly until the end.   Key technical features: Power: 80 W to 6600 W continuously adjustable, max. 6.6 kW machine tools Beam quality: < 2 mm·mrad for excellent focus handling Wavelength: 1030 nm (infrared), also adapted for green wavelength in special models Output options: Up to 4 laser outputs (4C) for simultaneous supply to multiple process cells Cooling system: Integrated heat exchanger (up to 28 °C inlet temperature), optional compressor cooling (up to 38 °C) Modular and service-friendly: Compact design (< 1 m² footprint), modular components for fast service   Advantages & Applications Ibsdpfozii D Iex An Iec Maximum process stability: Real-time power control ensures reproducible results Reflection resistance: Patented resonator design allows welding of reflective metals such as copper/aluminum Industry 4.0-capable: Sensor-integrated monitoring system, OPC-UA interface for condition monitoring & predictive maintenance Energy efficiency: Up to 50% less power consumption thanks to intelligent pulse control and energy-saving modes Versatility: Applications range from welding (also BrightLine for virtually spatter-free results) to cutting, hardening, casting processing, additive manufacturing, laser wire arc welding, etc.   Suitable applications: Ideal for industrial high-power laser applications: Application Features Manufacturing of automotive structural components Deep welding with high reproducibility Copper welding Particularly suitable with green wavelength (> 95 % spatter reduction) Remote hybrid welding Fast processing of large areas with a robust beam Additive manufacturing & hardening Suitable due to beam quality & compact design   Key technical data Property Laser power Up to 6,600 watts (6.6 kW), continuous Beam quality < 2 mm·mrad Wavelength 1030 nm (infrared) Number of outputs (4C) Up to 4 parallel usable fiber outputs Fiber connection diameter 100–600 µm (depending on configuration) Beam guidance Fiber-based, passive (no beam steering mirrors required) Cooling Water/air-cooled, internal or external chiller Dimensions Approx. 1000 × 800 × 2100 mm (W×D×H, depending on the version) Weight ~800–1200 kg (without cooling) Power supply 380 V - 10 % ... 460 V +10 %, 3AC + PE 38 kW / 41kVA 59 A / 400 V 50... 60 Hz Control TruControl 1000/3000, OPC-UA interface Safety standards Laser protection class 4 according to EN 60825-1   Weight: approx. 1200 kg   Condition: used   Scope of delivery: (See picture)   (Changes and errors in the technical data are subject to change!)   We will be happy to answer any further questions you may have by telephone.

Condition: used, Jungheinrich Ibsdpfx Ajzd Um Dsn Isc Reach Truck COMPACT AND MANEUVERABLE The Jungheinrich EJG is used as a cantilever reach truck wherever reach trucks with radar support cannot be used (e.g., for lateral picking of pallets, special load handling equipment, use with racking systems with impact protection). With an overall width of only 910 mm and high maneuverability, the vehicle can also be used in narrow storage areas. Manufacturer: Jungheinrich Type: EJG 112 Year of manufacture: 2020 Drive type: Electric Load capacity: 1,200 kg Lifting height: 2,500 mm Load center: 500 mm Self-weight: 2,175 kg Basic dimensions: Overall height: 1,880 mm Fork length: 1,150 mm Performance data: Motor: 24 V electric Motor power: 1.6 kW Battery: 24 / 375 V/Ah Charger: 24 V Power transmission: Pulse control Steering: Cantilever steering Year of manufacture: 2020 Type: EJG 112 Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: new, power: 18 kW (24.47 HP), fuel type: diesel, General information Year of manufacture: 2026 Year of construction: 2026 Operating hours: 3 Ijdpfx Anoyamyce Isbc Drivetrain Drive: Track Weights Empty weight: 2.700 kg Functional Working width: 140 cm CE mark: yes Condition General condition: very good Technical condition: very good Visual appearance: very good

Condition: good (used), machine/vehicle number: 3518, Year of construction: 2025, load capacity: 16,000 kg, lifting height: 4,000 mm, mast type: duplex, fork carriage width: 200 mm, fork length: 2,400 mm, total length: 5,420 mm, total width: 2,540 mm, operation weight: 17,820 kg, additional equipment features: Centralized greasing system, Front mud guards, Rear mud guards, Weight indicator, Equipment: lighting, Kalmar ECG160-12 from Uniktruck Wheel type – Drive wheel: Pneumatic Wheel type – Steering wheel: Pneumatic Wheel size – Drive wheel: RT 20 10.00 Iedsyz Dkcjpfx An Iobc Wheel size – Steering wheel: R 20 8.5 x 20

Condition: ready for operation (used), Round pile feeder 1st unit 6 plates 2nd unit 6 plates 3rd unit 4 plates Ijdpfxetcx Iqs An Isbc Heidelberg TSH twin stacker delivery