Used Lem 204 for sale (1,239)

Condition: like new (used), functionality: fully functional, Year of construction: 2020, Type / Model: EZS 130 (Electric Tow Tractor) Includes several trailers, type: GTE 106 Serial number: 91652991 Year of manufacture: 2020 Rated pulling force (60 min): 600 N Rated pulling force (5 min): 3,000 N Drive power: 2.8 kW Battery voltage: 24 V Lrjdpozxrf Tofx Agret Unladen weight (without battery): 320 kg Battery weight (min. / max.): 162 kg / 204 kg

Condition: excellent (used), MANUFACTURER: ATLAS COPCO MODEL: GA132VSD FF SERIAL NUMBER: APF136837 YEAR: 2008 POWER (kW): 153 CAPACITY (m3/min): 22.9 m3/min - 381 l/s Lrodpfoxtblxex Agret PRESSURE (bar): 8.5 FREQUENCY INVERTER: yes BUILT-IN DRYER: yes HEAT EXCHANGER: no COOLING (AIR/WATER): air ON TANK: no DOCUMENTS: no CONNECTION: 2 NEW/USED: USED

Condition: good (used), Year of construction: 1962, guillotine shears, sheet metal shears, metal sheet shears, crank guillotine shears -mechanical guillotine shears Lrjdpfsdzd Husx Agrst -Cutting width: 2040 mm -max. cutting thickness: 2.0 mm -Equipment: back stop, side stop, 3 supports -Drive: 5.5 kW -Installation dimensions: 2650/1900/H1070 mm -Transport dimensions: 2650/730/H1070 mm -Weight: 1378 kg

Condition: used, Power source for orbital welding machine MESSER GRIESHEIM - POLYSOUDE PS204 Water cooler for orbital welding machine MESSER GRIESHEIM - POLYSOUDE RC200 Welding power source, inverter welding unit POLYSOUDE PS 204 + RC 200 Year of manufacture: 1996 Serial number welding source: 9785153 Serial number cooling unit: 968628 Ljdpfx Agoyhq A Rjrert Output: 200 amps = 20% duty cycle 90 amps = 100% duty cycle Mains connection: 230 volts, 50 Hz, Schuko plug - Note: Display on the power source becomes illegible after some time - Remote control cable type BP 1436 with 7.5 meter connection cable - Adjustable output from 1 to 200 amps - DC only - HF ignition - Cooling water unit for torch cooling - 118,643 operating hours (read off) - Operating and maintenance manual Space requirement welding machine (L x W x H): 550 x 360 x 500 mm Space requirement cooling unit (L x W x H): 550 x 360 x 550 mm Weight welding machine: 45 kg Weight cooling unit: 25 kg Good condition Note: Display on power source becomes illegible after some time Without accessories Price applies to one set consisting of 1x power source and 1x water cooler.

Year of construction: 1999, condition: good (used), Granule dryers, compressed air dryers, continuous dryers, granule drying systems -Manufacturer: digicolor, Granule dryer type Dehumidifying Dryer -Model: DT 204 M -Power: 10000 W Lrsdpfolb Iv Njx Agrjt -Side channel blower: Siemens Elmo-G 1.5 kW -Individual components: see photos -Dimensions: 1020/610/H1550 mm -Weight: 241 kg

Condition: used, Max. blade length: 200 mm Ledpfxjzfll Te Agrjrt Max. sheet thickness: 4 mm steel Adjustable angle between 30° and 135° Selectable between hand and foot operation Weight: approx. 1000 kg

Condition: used, functionality: fully functional, machine/vehicle number: 6418411, Year of construction: 2016, operating hours: 204 h, load capacity: 1,200 kg, lifting height: 1,810 mm, fuel type: electric, mast type: simplex, construction height: 1,850 mm, fork length: 1,200 mm, drive type: Elektro, High Lift Truck VIN: 6418411 Mast Type: Standard Ledpfswm Svqex Agrjrt Condition: Ready for use and fully functional Technical Condition: Good Description: Toyota SPE 120 XRD No.: R0574 Year of Manufacture: 2016 Operating Hours: 204 The truck is in good visual and technical condition. Fast and uncomplicated transport is available upon request! This listing is for identification purposes only! A detailed description of the condition and possible equipment is available upon request! Errors and prior sale excepted, sold to businesses only. All sales of used goods are made without warranty or guarantee. If you haven't found the truck you're looking for, please contact us. We have a large selection of other trucks on site.

Condition: used, Year of construction: 2007, operating hours: 15,000 h, functionality: fully functional, working range: 4,000 mm, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 250 mm, workpiece weight (max.): 8,000 kg, type of input current: AC, input voltage: 400 V, table length: 4,500 mm, table width: 2,000 mm, tank capacity: 8,000 l, pressure: 4,150 bar, operating pressure: 3,800 bar, input current: 84 A, power: 45 kW (61.18 HP), Waterjet cutting system CMS Tecnocut IDRA (predecessor to the Idroline series) 2 x 5-axis cutting heads (only 1 head is fully operational / head 2 is functional but lacks high-pressure/sand feed) Cutting head configuration as a 2D head with a 250 mm Z-axis travel range Cutting head configuration as a 3D head with a 150 mm Z-axis travel range, A-axis travel range +/- 274 degrees, B-axis +/- 62 degrees, full 3D control, not 2.5D like many other machines Cutting area: X-axis: 2,000 mm Y-axis: 4,000 mm Z-axis: 250 / 150 mm Lredezbz Evopfx Agrjt A-axis: +/- 274 degrees B-axis: +/- 62 degrees Details: - 5-axis cutting head with IKC technology (intelligent cutting head control for angle error compensation) - Anti-collision/height sensor for surface scanning - DDX EasyStone Premium software - 60 HP/45 kW Jetpower EVO pump (3-cylinder) with an output of up to 5 L/min / Maximum pressure 4150 bar / Normal operating pressure 3800 bar The machine is still in operation and connected to power until July 31, 2026.

Condition: good (used), mileage: 597,118 km, power: 235 kW (319.51 HP), first registration: 03/2015, fuel type: diesel, tire size: 385/55R22.5, axle configuration: 4x2, fuel: diesel, color: black, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, permissible axle load (axle 1): 7,500 kg, permissible axle load (axle 2): 11,500 kg, loading space length: 7,680 mm, loading space width: 2,470 mm, loading space height: 2,300 mm, Year of construction: 2015, Equipment: ABS, AdBlue, cruise control, electric window regulation, onboard computer, = Additional Options and Accessories = - Aluminum fuel tank - Enclosed cab - Cab - Sun visor = Notes = Scania G320 4x2 - Bussbygg box body - Full air suspension - Euro 6 - Navigation system - Refrigerator Model Year: 9-3-2015 Mileage: 597118 VIN: YS2G4X20005378857 Box body: 768 - 247 - 230 Bussbygg box body Euro 6 Opti cruise automatic transmission Full air suspension Refrigerator Double-glazed windows Sleeper cab = Further Information = Lrsdpoz Dfzpofx Agret Suspension: Air suspension Front axle: Tire size: 385/55R22.5; Max. axle load: 7500 kg; Steerable; Tire tread depth left: 60%; Tire tread depth right: 60% Rear axle: Tire size: 275/70R22.5; Double tires; Max. axle load: 11500 kg; Tire tread depth left inner: 70%; Tire tread depth left outer: 70%; Tire tread depth right inner: 70%; Tire tread depth right outer: 70% Unladen weight: 11,595 kg Payload: 7,405 kg GVWR: 19,000 kg Technical condition: good Optical condition: good

Condition: good (used), Year of construction: 1989, functionality: fully functional, machine/vehicle number: AN-No.: 88.04.017 D, 8 very clean (reworked) Jakob Müller Frick AG looms NF42 from 1988, 1989 and 1990 from my stock. Machines run perfectly, 100% functional (refurbished) 12 shafts, without creel, with Mütrans, partly Müdata 1 piece NF 2/84mm from 1989 for 6.900€ AN-No.: 88.04.017 D with Müdata and Mütrans, 16 stocks 3 pieces NF 2/84mm overhauled from 1990 for 6.500€ each AN-No.: 90.01.704 B Lrjdpfjr Ix Igex Agret AN-No.: 90.01.755 A AN-No.: 90.01.229 A 1 piece NF 2/84mm overhauled from 1989 for 6.500€ AN-No.: 89.00.118 D 3 pieces NF 2/84mm refurbished from 1988 for 6.500€ each AN-No.: 88.04.244 A AN-No.: 88.02.758 A AN-No.: 88.02.758 B The machines come from a curtain band production and were originally equipped with a Z compartment. They were converted to standard compartments as part of the general overhaul. Dogonl All tension trees and press rollers have been newly vulcanized by Westland. The card rollers in the chain case are also new or newly vulcanized. The central lubrication in the chain case has been optimized by us. All machines have the first shaft free (for heavier reeds) and have 12 shafts installed. All machines are equipped with Mütrans II. Individual machines with double belt take-off (heavy fabrics) can optionally be supplied. I think possible for 4-5 machines. It is also possible to equip it with finely knurled tension trees. I think it is also possible for 4-5 machines. All needle holders are suitable for double needles. For this purpose, two additional Mütrans II can be installed upon request. The machines have been rebuilt from scratch. All bearings, shafts and bushings have been checked and replaced if necessary. All swing arms have been checked and replaced if necessary. Installed are: 1st shaft free (spacer block installed) 2nd and 3rd shaft swingarm 201 4th - 6th shaft swing arm 202 7th - 9th shaft swing arm 203 10th - 12th shaft swing arm 204 13th shaft swing arm 205 All shaft springs have been checked and replaced if necessary. Nothing is porous, cracked or defective. The electrical installation has been checked, the circuit board for the thread monitoring has been checked and, if necessary, repaired or replaced. The machines are painted in RAL 6021 Müller pale green. All panels are clean and free of damage. The machines come without Müdata. 4 machines are also equipped with a crawler gear. The machines have been set up and tested. The machines come without oil, strands, slats, reeds, needles and chain links. Delivery on a Euro pallet, FOB Wuppertal

Condition: used, Year of construction: 2019, operating hours: 8,889 h, Equipment: all wheel drive, Tigercat LH822D, a modern tracked harvester (forestry machine). This machine is used in forestry operations to simultaneously fell, delimb, and crosscut trees—a so-called cut-to-length system. Tracked harvester manufacturer: Tigercat Industries Functions: Timber harvesting, delimbing, crosscutting (cut-to-length) Application areas: Forestry, including selective logging and salvage operations Dimensions & Weight Lrjdpfx Ajyawv Ijgrjt * Length (without boom): approx. 5,180 mm * Width: 3,430 mm * Height: approx. 3,710 mm * Ground clearance: around 685–710 mm * Weight (without attachment): approx. 33,800 kg (ca. 74.6 t) * Tail swing radius: approx. 2,095 mm Drive & Performance * Engine: Tigercat FPT N67 (Stage V, Tier 4f, or non-certified) * Power: approx. 212 kW (284 hp) up to 217 kW (291 hp) at 2,200 rpm Drivetrain / Speed * Maximum speed (low range): approx. 1.6 km/h * Maximum speed (high range): approx. 3.4 km/h Hydraulics & Controls * Main, harvester head, and cooling pumps: piston pumps; additionally, a transmission oil pump * Hydraulic oil reservoir: approx. 204 L Very good condition

Condition: good (used), functionality: fully functional, Year of construction: 2011, Description MACHINE IS GOOD WORKING CONDITION BATTERY CAN BE FOR CUSTOMER NEW, OR OLD. ON THEIR WISH LIFTING HEIGHT 6400 mm Specifications Manufacturer YALLE Ljdpfx Asvk Uxwegrert Model MR-14 Year 2011 Condition Used

Condition: new, functionality: fully functional, machine/vehicle number: NEW-23, empty load weight: 651 kg, maximum load weight: 2,849 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 4,060 mm, loading space width: 2,040 mm, loading space height: 300 mm, suspension: other, tire size: 195 / 50 R 13, maximum speed: 100 km/h, color: silver, trailer brake: trailer braked, Year of construction: 2026, brakes: other, SARIS PL 406 204 3500 2 NEW VEHICLE Internal dimensions: 406cm x 204cm Side wall height: 35cm Loading bed height: 66cm Gross vehicle weight: 3,500kg Payload: 2,849kg Braked tandem trailer Overrun brake and handbrake by AL-KO Maximum capacity axles and brakes Low chassis Fully welded, hot-dip galvanized steel frame 35cm high aluminum profile drop sides with tension latches Side walls fold down and are fully removable on all sides 15mm thick, slip-resistant, durable phenolic plywood floor Automatic jockey wheel with 400kg load capacity 8 noise-reducing lashing rings, each rated at 800kg tensile strength Reinforced 13'' C-specification tires with steel valves M+S tires Net/rope hooks on frame 13-pin electrical connector Front LED marker lights Lrjdpfxjrk Iwne Agrot Rear lamps with reversing light, rear fog lamp (NSL), and triangular reflectors OPTIONAL ACCESSORIES: PERMANENTLY REDUCED PRICES FROM FEBRUARY 2026 - 100km/h equipment (shock absorbers) - Spare wheel with bracket - Without side walls (discounted) - AL-KO cable winch 12.5m - Black Edition (powder-coated black side walls and rims) - Integrated ramps, 2800kg - Steel checker plate overlay for the floor - Full LED lighting - Anti-theft lock - Fine-meshed or coarse-meshed net - H-frame - Mesh extension sides, various heights, also closed version - Additional side walls 30cm with tension latches - Flat tarpaulin with or without bows - High tarpaulin, 180cm or 200cm Further accessories available on request! Plus delivery to Gera and vehicle documents: €200 net Pictures are for illustration only and may include optional extras subject to surcharge. Have you not found the right trailer yet? We always have 50–100 vehicles in stock ready for immediate collection. Our workshop is open Monday to Friday, 8:00–17:00, for all kinds of repairs. Specialist in axle repairs, also for caravans. Wide range of rental trailers available. Additionally, we offer a large selection of spare parts and accessories for trailers of all brands. Get advice by phone, visit our website, or come by in person.

Condition: used, Power source for orbital welding machine MESSER GRIESHEIM - POLYSOUDE PS204 Water cooling unit for orbital welding machine MESSER GRIESHEIM - POLYSOUDE RC200 Welding power source, inverter welding machine POLYSOUDE PS 204 + RC 200 Year of manufacture: 1997 Lodot Awm Depfx Agrjrt Power source serial no.: 9885186 Cooling unit serial no.: 97861? Output: 200 amps = 20% duty cycle 90 amps = 100% duty cycle Power supply: 230 volts, 50 Hz, Schuko plug - Remote control cable type BP 1436 with 7.5 m connection cable - Adjustable output from 1 to 200 amps - DC only - HF ignition - Cooling water unit for torch cooling - 44,895 operating hours (read) - Operating and maintenance manual included Space requirements welding machine (L x W x H): 550 x 360 x 500 mm Space requirements cooling unit (L x W x H): 550 x 360 x 550 mm Weight welding machine: 45 kg Weight cooling unit: 25 kg Good condition Sold without accessories The price refers to a set consisting of 1x power source and 1x water cooler.

Condition: new, functionality: fully functional, machine/vehicle number: NEW-25, empty load weight: 1,170 kg, maximum load weight: 2,330 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 4,060 mm, loading space width: 2,040 mm, loading space height: 350 mm, suspension: other, tire size: 195 / 50 R 13, maximum speed: 100 km/h, color: silver, trailer brake: trailer braked, Year of construction: 2026, brakes: other, SARIS K3 406 204 3500 2 HD E Three-sided tipper NEW VEHICLE Internal dimensions: 406cm x 204cm Side board height: 35cm Loading platform height: 71cm Total weight: 3500kg Payload: 2330kg Braked tandem axle trailer Overrun brake and parking brake from AL-KO Largest possible axle and brake Extended axle support Low chassis Fully welded, hot-dip galvanized steel frame 35cm aluminum profile side boards with tension lock Can be folded down and removed on all sides 15mm thick, non-slip, and robust screen-printed wooden floor Additional steel plate on the wooden floor Heavy-duty support wheel 500kg 8 noise-reducing lashing eyes with 800kg tensile force Reinforced 13" C tires with steel valve M+S tires Net/rope hook on the frame 13-pin connector LED outline lights at the front LED lighting at the rear Upper frame mounted on rubber Large tilting angle of 44 degrees backwards Lateral tilting by repositioning the safety pins Electric tilting control with plug for charging the 12V battery Electric limitation of the tilting angle to the side U-rail for attaching the original SARIS ramp Preparation for ramps OPTIONAL ACCESSORIES PERMANENTLY REDUCED IN PRICE STARTING FEBRUARY 2026 -Equipment for 100km/h (shock absorbers) -Leaf springs -Spare wheel with holder -Without side boards (price reduction) -Black Edition (Powder-coated side boards and rims in black) -Integrated ramps 2800kg -Charger -Remote control -Bluetooth remote control -Emergency hand pump in combination with electric operation -Safety support for maintenance work when the vehicle is tilted Ledpszg A I Ujfx Agrert -Folding crank rear supports -Theft protection -Net with fine or coarse mesh -H-frame -Leaf grid in different heights, also closed -Extension side boards 30cm with tension lock -Flat cover with or without bow -High cover 180cm or 200cm More accessories available on request! Plus shipping to Gera and vehicle registration document €380 net Images are for illustrative purposes only and may show optional accessories that incur an extra charge. Have you not yet found the right trailer? We have 50-100 vehicles permanently and immediately available in stock for you to take away. The workshop is open on weekdays from 8:00 a.m. to 5:00 p.m. for all types of repairs. Specialist in axle repairs, also for caravans. In addition, we have a large selection of spare parts and accessories for trailers from various manufacturers. You will find a large selection of rental trailers with us. Visit us online or come by!

Condition: good (used), Year of construction: 2001, operating hours: 3,773 h, load capacity: 3,000 kg, lifting height: 5,500 mm, fuel type: gas, mast type: triplex, construction height: 2,760 mm, empty load weight: 4,700 kg, mileage: 3,773 km, Triplex LPG forklift brand TOYOTA Year of manufacture 200X Capacity 3,000 kg; Lifting height 5,500 mm; Equipped with FREELIFT + SIDESHIFT; Overall height 2,760 mm; ONLY 3,773 hours Watch the video on YouTube Lrsdpfoylc Rzox Agret

Condition: like new (used), Ident No. 87481044 SED2Z Application: Keyboard Width: 86 mm Height: 67 mm Depth: 63 mm Lrodpfx Agozc H Hnsrst Weight: 252 g Condition: Like new

Condition: used, Universal Shaker Accessories / Clamping Devices For sale is a used accessory set for an electrodynamic shaker or vibration test stand. The set consists of numerous solid aluminum clamping devices, angle adapters, adapter plates, clamping blocks, retaining elements, precision chucks, and other accessories for vibration testing. The components are ideally suited for individual test specimen setups, special designs, and use in vibration test stands. Technical data: Manufacturer: unknown Type: Accessory set for electrodynamic shaker / vibration test stand Material: predominantly aluminum Design: Clamping devices, angle adapters, adapter elements, and fasteners Equipment: Several clamping devices Angle adapters of various sizes Precision adapter elements Lrodpozpya Hofx Agret Clamping blocks Adapter plates Aluminum rings Retaining and fastening elements Solid aluminum constructions Precision-engineered components Threaded holes and clearance holes Universally applicable Further accessories as shown in the pictures Application areas: Electrodynamic shakers Vibration test stands Vibration testing Material testing Environmental simulation Research and development Automotive industry Aerospace Test specimen setups and special designs Scope of delivery: Complete accessory set as shown in the pictures Clamping devices Angle adapters Adapter plates Clamping blocks Adapter elements Aluminum rings Further accessories as shown in the pictures Condition: Used. Visual condition as shown in the pictures. Normal wear and tear, scratches, and pressure marks are present due to age. Transport: Only the accessories shown in the pictures are sold. The table shown in the pictures and other items not explicitly mentioned are not included in the sale. Shipping on a pallet or collection is possible. Subject to changes, errors, and prior sale. We will gladly answer any further questions by telephone.

Year of construction: 1992, condition: used, Power: 80 kW (109 HP) Number of cylinders: 6 Dimensions (LxBxH): 750 x 245 x 280 cm Track width: 4 cm Crane: Yes Serial number: 65539 Anchor Drilling Rig Hour meter reading: 11,385H Drill mast: • Type: 200V • Mast length: 6,000 mm Double drill head Drill motor 1 • Type: KH13 Drill motor 2, for hammer rods • Type: KD1011 Equipped with a crane • Brand: Hiab • Type: 020 Engine: • Brand: Deutz • Engine power: 109 kW • Number of cylinders: 6 Track width: 400 mm Overall dimensions: 7,500 x 2,450 x 2,800 mm Lrjdpfx Aez Df Rqsgrst Remarks: signs of wear Online auction of drilling, foundation and heavy construction equipment, including a 2014 COMACCHIO MC28 HT multifunctional ground drilling rig, 1992 KLEM KR806D horizontal drilling machine, 1977 AMERICAN HOIST 9299 dragline, NOBAS UB35S and NOBAS UBI254 draglines, and a 2001 LIEBHERR A310B wheeled excavator. The machines originate from a foundation and marine construction environment and are suitable for contractors, drilling and piling companies, crane and dragline specialists, exporters, resellers and buyers of heavy construction machinery. The online auction opens Thursday 17 September and closes Tuesday 6 October. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing day is on: - Friday 2 October Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, CFS EcoCut Cap 2 | Emulsifier / In-line micro-cut chopper Manufacturer: CFS Model / Type: ECOCUT CAP 2 Serial number: 5000068187 POS 31 Year of manufacture: 2011 Power supply: 400 V / 3 phases / 50 Hz Rated current: 358.5 A Rated motor power: 204 kW Overall dimensions: 3300 × 2050 × 2850 mm Includes a pallet box with parts. The CFS EcoCut Cap 2 is an advanced, extremely powerful industrial emulsifier (in-line micro-cut chopper) manufactured under the CFS brand. This 2011 model is designed for continuous operation in high-capacity production lines, where it is crucial to obtain a perfectly smooth, stable emulsion and maximize the particle size reduction of the raw material. Equipped with a giant 204 kW motor operating at 358.5 A, this emulsifier easily handles the most demanding tasks, ensuring excellent disruption of protein and fat structures. It is an indispensable piece of equipment in the production of high-quality sausages, frankfurters, pates, mortadella, as well as in the pet food industry and in the production of ready meals and sauces. Key features and advantages: - Unmatched power (204 kW): The large power reserve allows for stable, multi-hour operation at maximum throughput, without the risk of overloading the drive, even with very dense product feeds. Lredpfey Ub E Dex Agrst - Advanced Micro-Cut system: The in-line cutting system guarantees precise, repeatable cutting and homogenization. It enables the achievement of an ideal degree of emulsification, which improves the binding of water and fat, increasing efficiency and enhancing the texture of the finished product. - Automation and integration: The EcoCut Cap 2 model works perfectly in an automated process line, directly with mixers or kneaders, eliminating the need for manual transport of the raw material and accelerating the production cycle.

Condition: used, Year of construction: 2004, Overview  This cold glue labelling machine was manufactured in 2004 by German company KHS. The machine was running until January 2025 and is now stored in the company. The labeller has a camera system for the orientation of the labels in the neck area for swing-top glass bottles. Technical data  - Capacity: Up to 26,000 bottles per hour - Working direction: anticlockwise - Formats: - 330 ml Longneck glass bottles - 330 ml Steinie glass bottles - 330 ml Swing-top glass bottles - 500 ml NRW glass bottles - Label positions: - Front (up to 2 labels) - Back (up to 1 label) - With a Siemens S7 control Lodewhwwvjpfx Agrjrt - New HMI touch panel in 2019

Condition: excellent (used), functionality: fully functional, Year of construction: 2022, laser power: 8,000 W, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, fiber laser cutting machine power: 8000W table size: 4000x2000mm pallet changer Siemens controller Siemens drives THK guides Precitec Procutter auto focus torch Max Photonics resonator CE warranty offered with: warranty Ljdpfezx U T Tex Agrert CAD / CAM software setup delivery (optional) training this is an exhibition machine and could be tested under power any time. please contact us

Condition: like new (used), Year of construction: 2023, functionality: fully functional, travel distance X-axis: 1,500 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 1,000 mm, Equipment: documentation/manual, SEPRO Success 11C (2023) Linear cartesian robot , 1500mm Number of axis: 3 X = 1500 mm Y= 500 mm Z= 1000 mm Payload: 5 kg Euromap 67 More information in photos of this robot, complete manuals available. SEPRO SUCCESS 11 – Technical Data (Summary) Robot type: Success 11 Serial number: R009519 Mechanics 1. Payload: 5 kg 2. Robot weight: 204 kg 3. Robot dimensions: 2430 × 1200 × 1570 mm 4. Max. pneumatic pressure: 7 bar 5. Air consumption: 140 l/min (normal), 260 l/min (peak) Stroke axes X-axis (horizontal stroke): 1. Stroke: 1500 mm 2. Speed: 2.0 m/s 3. Repeatability: ±0.1 mm Y-axis (horizontal take-out): 1. Stroke: 500 mm 2. Speed: 2.0 m/s 3. Repeatability: ±0.1 mm Z-axis (vertical): 1. Stroke: 1000 mm 2. Speed: 3.0 m/s 3. Repeatability: ±0.1 mm Rotations 1. R1 pneumatic rotation: 0–90° 2. R3 pneumatic rotation: 0–180° or 0–90° Control system – Visual 2 1. Weight: 43.5 kg 2. Dimensions: 550 × 400 × 295 mm 3. Power supply: 3×400–480 V ±10% 4. CPU: i.MX537 / Cortex A8 @ 800 MHz 5. Memory: 512 MB DDR + 512 MB Flash 6. SD card: 4 GB 7. I/O: 8. Robot: 16 inputs / 16 outputs 9. Cabinet: 7 inputs / 8 outputs 10. USB ports: 1× Master USB, 1× Slave USB 11. Ethernet 10/100 Pneumatics 1. 2 pneumatic circuits 2. Vacuum and pressure functions available Environmental conditions 1. Operating temperature: +5 to +40 °C 2. Storage temperature: –25 to +55 °C 3. Humidity: 30–95% (non-condensing) Ledpfjx Dnc Ssx Agrjrt 4. Protection rating: IP22 / IK07 Options 1. PC Editor (Windows XP to Windows 7) 2. Conveyor control (3×42V AC to 3×550V AC) 3. Safety kit for access door 4. 1× conveyor

Year of construction: 2021, condition: like new (used), functionality: fully functional, machine/vehicle number: 3815407, WEIGHT 8000KG Lrjdpfxst Nhqyj Agret FEM ISO 1Am M4 KW 2.4/15.5 ( 50 Hz) MAXIMUM CAPACITY 16 TON

Condition: used, mileage: 11,400 km, power: 235 kW (319.51 HP), first registration: 06/2023, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: green, gearing type: automatic, emission class: euro6, loading space length: 4,000 mm, loading space width: 2,400 mm, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), soot filter, Int. No.: 213 Very well-maintained MAN TGM tipper truck with Palfinger crane * MAN * TGM 18.320 * 4x2 wheel configuration * Automatic transmission * Three-way tipper * Permissible weight 18,000 kg * Payload approx. 8,300 kg * CRANE Palfinger PK 14501 * Radio remote control for crane * 4x hydraulic extension * 5th/6th control circuit * 2x fully hydraulic outriggers * Hook height approx. 15m * Grapple available at extra cost * Lateral reach, see load chart * Suspension: leaf spring/air suspension * Differential lock * Central locking * 3-seater * A/C * Radio * Trailer hitch 22 tons * Hydraulic system for trailer hitch * Tires: 1st axle 100%, 2nd axle approx. 100% * Environmental badge (green) * 1st owner * Complete inspection book * Very good condition * VAT can be shown!!! Trade-in possible Financing available from 4.99% Lrsdpfx Aez Empdogret Errors and prior sale excepted! The information in this advertisement is a non-binding description and does not constitute guaranteed features. The seller assumes no liability for typographical and data transmission errors. Listed equipment must be checked separately. All information in the advertisements is non-binding! Delivery throughout Germany upon request Opening hours: Monday to Thursday from 9:00 a.m. to 5:00 p.m. Friday from 9:00 a.m. to 2:00 p.m. and by appointment!!!