Used Lippert 9600-750-600 for sale (15,993)

Condition: used, CTS Type: T-70/600 CTS Temperature Test Chamber, Water-Cooled Technical Performance Data: Temperature Operating Range Temperature range -70°C / +180°C Cooling rate 3.0 K/min Heating rate 3.5 K/min Temperature stability, time-related ≤± 0.3 K Dimensions: Test volume: 600 liters Test chamber dimensions: height, approx. 850 mm, width, approx. 850 mm, depth, approx. 830 mm External dimensions: height, approx. 1900 mm, width, approx. 1120 mm, depth, approx. 1875 mm Operating Data: Electrical connection 400 V +6% -10%, 3/N, 50 Hz Connected load 8.2 kW, 14.2 A Refrigerant: R404A / R23 Weight: 600 kg For your security as a buyer, please note the following information: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of any necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Kdsdpfxeziygyj Ag Aeu Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and specifications are subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: used, CTS Climate testing chamber T-70/600, water-cooled Temperature range: -70°C to +180°C Rated voltage: 400V 3/N PE 50 Hz Rated power: 6.7 kW Rated current: 10.2 A Compressor: TFH2480Z/TFH2511Z, refrigerant R23/R404A Control: -Microprocessor-controlled regulation and monitoring system -Simple, user-friendly terminal integrated into the door. -Digital display of setpoint and actual temperature Easy adjustment via +/- buttons -Digital input for temperature in °C -PLC compatible -Up to 100 test programs possible -RS 232 interface -2 free switching channels for on-site test item control Insert rack: Stainless steel, support surface 820 x 710 mm Load per rack max. 35 kg Total load with max. rack capacity 100 kg Refrigeration unit: Water-cooled, low-noise, fully hermetic, stepless power adjustment via electronic monitoring and control system, environmentally friendly refrigerant R404A/R23 Temperature tests: Temperature range -70 °C to +180 °C Temperature deviation ±0.1 to 10.3 K over time Temperature change rate measured in the center of the test chamber according to DIN 50 011, Part 12 Heating 2.5 K/min Cooling 2 K/min Heat radiation max. 1500 W at +20°C The technical data refer to an ambient temperature of +25 °C, rated voltage 400 V, without test item, without radiation and without additional equipment. Dimensions: Test volume 600 liters Test chamber dimensions 850 x 830 x 850 mm (W x D x H) External dimensions 1050 x 1850 x 1900 mm (W x D x H) Operating data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Rated power 6.7 kW Rated current: 10.2 A Protection class IP 22 Condensate drain, unpressurized R 1/2" internal thread Sound pressure level < 62 dB(A) Weight approx. 400 kg For your safety as a buyer, the following information! The following points are carried out on our offered chambers in advance: 1. Function check and replacement of necessary components Kdodoziycbjpfx Ag Aou 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information is subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: ready for operation (used), Year of construction: 2016, stroke length: 350 mm, total width: 3,350 mm, total height: 5,500 mm, overall weight: 100,000 kg, product length (max.): 4,100 mm, Mechanical stamping press manufactured in 2016. This HIM HWAIL PRESS HCDS-600 features a press capacity of 600 tons and a stroke length of 350 mm. It includes a slide area of 2900 x 1300 mm and a bolster area of 3000 x 1400 mm. If you are looking to get high-quality stamping capabilities, consider the HIM HWAIL PRESS HCDS-600 machine we have for sale. Contact us for further details. • Press capacity: 600 ton • Rated tonnage point above B.D.C.: 7 mm • Number of strokes: 30 SPM • Stroke length: 350 mm • Die height: 600 mm • Slide adjustment: 120 mm • Slide area (L x W): 2900 x 1300 mm • Bolster area (L x W): 3000 x 1400 mm • Bolster thickness: 240 mm • Working height: 1300 mm • Side opening: 1450 x 750 mm • Main motor: AC 55 kW x 4 / VS 75 kW x 4 • Slide adjustment motor: 5.5 kW x 6 • Air pressure: 5 kg/cm² • Die cushion capacity: 16 x 2 ton • Die cushion stroke: 130 mm • Pad area (L x W): 1400 x 650 mm • Quantity available: 5 units Kdodpfxez Sqf Ro Ag Aou • Pricing note: indicated price is per individual machine Additional equipment • Shuttle transfer robot/system • Included when purchasing the complete package of machines • Available separately at EUR 120,000 Technical Specification Stamping Force 6000 Kn

Condition: new,

Condition: new, Equipment - Robust, professional-grade unit - Fall protection net - PVC conveyor belt - Belt length 7 m - Belt width 60 cm - Chassis with pneumatic tires, Ø 360 mm - Height adjustable via hand winch Kdedpfxo Abr Tgs Ag Asu - Minimum conveying height with 7 m belt length: 2.60 m - Maximum conveying height with 7 m belt length: 4 m CUSTOM DESIGNS ARE POSSIBLE UPON REQUEST, WITH INDIVIDUALLY ADJUSTABLE BELT LENGTHS AND SPEEDS! Possible gear ratios without additional cost: 1:50 = 10 m/min 1:40 = 13 m/min 1:30 = 17 m/min 1:25 = 21 m/min (Standard) 1:20 = 26 m/min 1:15 = 35 m/min Translation: 1:25 = approx. 21 m/min belt speed (standard gear ratio) Min. discharge height: 2600 mm Dimensions (L x W x H): 7000 x 1100 x 700 mm Belt: 7000 x 600 mm Drive: Electric motor 230V/1.5kW Max. discharge height: 4300 mm

Condition: new,

Condition: new,

Condition: new,

Condition: new, With our timber grapples, logs of various diameters and lengths can be transported, depending on the grapple model. The grapples can also be used to lift perforated jumbo panels, etc., as well as reinforced concrete slabs. Not recommended for pulling logs. The grapples clamp shut under the weight of the log. All components are manufactured with high precision using a laser cutter from high-quality steel and powder-coated. Each grapple is equipped with a shackle as standard. Kjdpfo Abpuhex Ag Aedu

Condition: new, Energy-saving due to the use of IE2 motors Low wear due to very low compressor speed Quiet operation and high running smoothness In the lower range of pressure tank sizes, up to 200 liters, they are available in either mobile or stationary versions. Kdjde Abn U Hepfx Ag Aeu for mobile versions in the pressure tank range of 50 - 200 liters: • Check valve • Relief valve • Manometer • Safety valve • Condor pressure switch • Quick coupling • Motor protection switch • Condensate drain valve • 3 m connection cable with plug for stationary compressors in the pressure tank range of 50 - 500 liters: • Check valve • Condor pressure switch • Safety valve • Ball valve 1/2" • Motor protection switch • Condensate drain valve • Manometer • Vibration damper up to 4 kW motor power: • 3 m connection cable with plug • Relief valve from 5.5 kW motor power: • automatic star-delta starter for wall mounting • solenoid valve with silencer Suction capacity l/min 625 Delivery rate l/min (at 7 bar) 470 Motor power kW 4.0 Rated voltage V/Hz 400/50 Compressor speed min 860 max. pressure bar (g) 15 Tank capacity l 300 Stages 2 Weight kg 237 Dimensions l/w/h in mm 770/800/2.110 max. pressure bar (g): 15 Compressor speed min: 860 Weight kg: 237 Delivery rate l/min (at 7 bar): 470 Tank capacity l: 300 Stages: 2 Rated voltage V/Hz: 400/50 Suction capacity l/min: 625 Motor power kW: 4.0 Dimensions l/w/h in mm: 770/800/2.110

Condition: new, Energy-saving due to the use of IE2 motors Low wear due to very low compressor speed Quiet operation and smooth running In the lower range of pressure vessel sizes, up to 200 liters, they are available in either mobile or stationary versions. For mobile versions in the pressure vessel range of 50 - 200 liters: • Check valve • Relief valve • Manometer • Safety valve • Condor pressure switch • Quick coupling • Motor protection switch • Condensate drain valve • 3 m connection cable with plug For stationary compressors in the pressure vessel range of 50 - 500 liters: • Check valve • Condor pressure switch • Safety valve • Ball valve 1/2" • Motor protection switch • Condensate drain valve • Manometer • Vibration damper Up to 4 kW motor power: • 3 m connection cable with plug • Relief valve From 5.5 kW motor power: • Automatic star-delta starter for wall mounting • Solenoid valve with silencer Intake capacity l/min 625 Delivery rate l/min (at 7 bar) 470 Motor power kW 4.0 Rated voltage V/Hz 400/50 Compressor speed min 860 Ksdpo Abn Tcefx Ag Ajdu Max. pressure bar (g) 15 Tank capacity l 300 Stages 2 Weight kg 240 Dimensions l/w/h in mm 1,350/700/1,360 Max. pressure bar (g): 15 Stages: 2 Delivery rate l/min (at 7 bar): 470 Dimensions l/w/h in mm: 1,350/700/1,360 Motor power kW: 4.0 Compressor speed min: 860 Rated voltage V/Hz: 400/50 Intake capacity l/min: 625 Weight kg: 240 Tank capacity l: 300

Condition: new, Features - Gasoline-powered compressor for mobile use - V-belt-driven 2-cylinder in-line engine in a 2-stage design - Equipped with a robust HONDA GX 270 4-stroke engine - With pressure regulator for precise pressure setting - With large pneumatic tires and ergonomic handle for easy transport - Condensate drain via ball valve Kdjdpfx As Abqn Aog Aju Tank size (L): 50 Sound pressure level LWA/dB: 97/78 Delivery rate l/min: 520 Engine kW/HP: 6 / 8.4 Tank pressure bar: 10 Speed rpm: 1100 Dimensions (mm): 1270x440x910 Suction capacity l/min: 653

Condition: used, This listing is for a Enviro Systems UVIC-750 Kdsdpexzhu Ajfx Ag Aeu

Condition: used, This listing is for 1 Box Hamilton Microlab 600 series Accessories Kdjdoxhfbyopfx Ag Asu The units are in full working condition and is ready for immediate use

Condition: good (used), Fixed speed 380 Volt Kjdpfxjz Rd Ehe Ag Asdu More information or a quote? Do this quick and easily via the Duijndam Machines website! You can also give us a call. See all the available machines at our website. Since 1977 supplier of reliable used agricultural and horticultural equipmentMachines are checked for deliveryExperienced teamWe can help you with getting the machine to your company Duijndam Machines The specialist in used agriculture and horticulture machinery

Condition: good (used), Fixed sped380 Volt Kdedpfx Asz Rcv Seg Aju More information or a quote? Do this quick and easily via the Duijndam Machines website! You can also give us a call. See all the available machines at our website. Since 1977 supplier of reliable used agricultural and horticultural equipmentMachines are checked for deliveryExperienced teamWe can help you with getting the machine to your company Duijndam Machines The specialist in used agriculture and horticulture machinery

Condition: used, functionality: fully functional, Year of construction: 2002, machine/vehicle number: 2465208, power: 48 kW (65.26 HP), load capacity: 230 kg, lifting height: 18,390 mm, platform length: 1,830 mm, platform width: 760 mm, overall weight: 7,350 kg, transport length: 10,150 mm, transport width: 2,420 mm, transport height: 2,740 mm, fuel type: electric, color: blue, Technical specifications Year of manufacture: 2002 Drive: Electric, 48 kW Kdsdszrk Uyopfx Ag Aou Working height: 20.39 m Platform height: 18.39 m Platform dimensions (L x W): 1.83 m x 0.76 m Overall dimensions (L x W x H): 10.15 m x 2.42 m x 2.54 m Lateral reach: 13.54 m Turret rotation: 400° Load capacity: 230 kg Basket arm length: 1.24 m Travel speed: 4.8 km/h Weight: 7,350 kg Gradeability: max. 30% Operational, with general signs of wear and tear.

Year of construction: 1981, condition: used, Technical details: height over floor: 850 mm total power requirement: 2,5 kw temperature: 200 °C voltage: 220/50 V / Hz weight of the machine approx.: 80 kg space requirement of the machine approx.: L:0,85xB:0,6xH:1,15 m Application area: drying device internal dimensions: W: 0,50 x T:0,42 x H:0,60m door opening : W:500 x H:600mm The internal room does have 3 shelves ( depth 370 x W: 490mm) upper shelf inlet has been taken out, because the thermometer gets deep into the room ( see picture / comparable) Oven has been tested up to 160°, with limitation on sale, 2 heating rods up are OK and 2 heating rods down are not working! Kjdju N Agkopfx Ag Asdu *

Condition: used, Year of construction: 1996, Technical details: x-travel: 762 mm y-travel: 510 mm z-travel: 560 mm control: Heidenhain TNC 415 OR 360 tool changer with: 21 place table clamping surface:: 865 x 510 mm table load: 455 kg tool taper: SK40 spindle revolutions per minute : 60 - 8000 U/min Kdedeu Idmvepfx Ag Asu feed:: X/Y/Z; 15 000 mm/min rapid traverse : X/Y/Z: 24 m/min compressed air: Bedarf: 5,5 bar Total power requirement: 30 kVA motor capacity: Spindelmotor: 11,0 kW max. torque on the spindle: konstant: von 60 - 750 KN Weight approx.: 4,3 t dimension machine xH: 2,6 x 2,8 x 2,6 m dimension coolant device: L: 2,7 x B: 0,8 x H: 0,8 m Machining center with automatic tool changer IKZ and coolant supply through nozzles Chip and coolant tray Lubrication system through ball screws Manual control unit Heidenhain TNC 415 - dialog or according to ISO (machining cycles: deep hole drilling; tapping; slot milling; rectangular pocket and circular pocket milling; SL cycles), up to 100 programs in file management Machine can be visited with pleasure under power. i.D. *

Condition: used, CTS Type: T-40/600 /011232 CTS Temperature Test Chamber, Water-Cooled Includes metal supports to increase the floor load capacity Test chamber volume: 600 liters Test chamber dimensions: Height approx. 850 mm, Width approx. 850 mm, Depth approx. 830 mm External dimensions: Height approx. 1900 mm, Width approx. 1050 mm, Depth approx. 1850 mm Temperature operating range: Temperature range -40 to +180°C Temperature deviation ±0.1 to ±0.3 K over time Heating rate: 2.5 K/min Kedpfxszh Htwj Ag Asdu Cooling rate: 3 K/min Electrical connection 400 V +6% -10%, 3/N, 50 Hz Rated power: approx. 5.5 kW Rated current: approx. 8.5 A Refrigerant: R-404A Weight: 550 kg For your safety as a buyer, please note the following information! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, CTS Type: T-70/600/S Water-cooled temperature testing chamber Control: - 32-bit controller - LCD control panel - Digital display of setpoint and actual values - Numerical input of setpoints - Error messages in plain text - RS 232 interface - Free switching channels for external control of the test item Technical performance data Temperature tests: Temperature range -70 °C to +180 °C Temperature deviation ±0.1 to ±0.3 K over time Temperature change rate according to IEC 60068-3-5 Heating 2.5 K/min Cooling 2.5 K/min Heat radiation approx. 2500 W at +20°C approx. 2500 W at +0°C approx. 1800 W at -40°C The technical data refer to an ambient temperature of +25 °C, Kdsdpfx Agezg Ty Ij Aeu rated voltage 400V, without test item, without radiation, and without additional equipment. Dimensions: Test volume 600 liters Test chamber dimensions height, approx. 850 mm, width, approx. 850 mm, depth, approx. 830 mm External dimensions height, approx. 1900 mm, width, approx. 1120 mm, depth, approx. 1875 mm Operating data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Rated power 8.8 kW Rated current 14.8 A Protection class IP 22 Refrigerant: R404A / R23 Weight approx. 700 kg For your safety as a buyer, please note the following information! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by telephone.

Condition: used, CTS   Type: T-40/600 /011232   CTS Temperature Testing Chamber, Water-Cooled   Including metal supports to increase the floor load capacity   Test chamber volume: 600 liters   Test chamber dimensions: Height approx. 850 mm, Width approx. 850 mm, Depth approx. 830 mm   External dimensions: Height approx. 1900 mm, Width approx. 1050 mm, Depth approx. 1850 mm   Temperature operating range:   Temperature range -40 to +180°C   Temperature deviation ±0.1 to ±0.3 K over time   Kdedjziyw Sspfx Ag Aju Heating rate: 2.5 K/min Cooling rate: 3 K/min   Electrical connection 400 V +6% -10%, 3/N, 50 Hz Rated power: approx. 5.5 kW Rated current: approx. 8.5 A Refrigerant: R404A   Weight: 550 kg   For your safety as a buyer, please note the following information!   The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leakage test with certificate 4. After successful inspection, the chambers are subjected to a documented test run.   Condition: used   Scope of supply: (See picture)   (Changes and errors in the technical data and specifications are subject to change!)   We will gladly answer any further questions you may have by telephone.

Condition: used, Weiss Type: WK11 - 600/70/5 Weiss Climate Chamber, Water-Cooled The Weiss climate chamber WK11-600/70/5, with an approximate usable volume of 600 liters, is suitable for temperature and humidity testing as well as for conditioning samples and materials in the range of -70 °C to +180 °C. Simcon/32 - Net Controller Technical Data: Test chamber designation: WK11-600/70/5 External dimensions with hinges and door closure: Height 1995 mm, Width 1090 mm, Depth 1660 mm External dimensions without hinges and door closure: Height 1995 mm, Width 1000 mm, Depth 800 mm Internal dimensions: Height 950 mm, Width 800 mm, Depth 800 mm Connections: 2x R1 NW 125 mm ∅ 1x L1 NW 50 mm ∅ Test chamber volume: approx. 600 liters Data for temperature tests: Temperature range -70 °C to 180 °C Temporal temperature deviations in the center of the usable space: ± 0.1 to ± 0.5 K Spatial temperature deviations: ± 0.5 to ± 2 K Temperature gradient: 1 to 4 K Temperature change rate: Heating: 6 K/min Cooling: 6 K/min Thermal compensation: at +20 °C: 5000 W at -20 °C: 5000 W Data for climate tests: Temperature range +10 to +95 °C Humidity range 10 to 98 % RH Temporal temperature deviations in the center of the usable space: ± 0.1 to ± 0.3 K Spatial temperature deviations: ± 0.5 to ± 1 K Temperature gradient: 1 to 2 K Temporal humidity fluctuation in the center of the usable space: ± 1 to ± 3 % RH Thermal compensation: 500 W 3/N/PE AC 400V ±10% 50Hz Rated power: 16.5 kW Rated current: 29 A Fuse on customer side: 32 A slow-blow Permissible weight of test specimen: Total load of the shelf supports: 80 kg Test chamber floor: 80 kg, insert shelf: 40 kg Weight: 675 kg Refrigerant: R452A / R23 Important note: "The table shown in the photos is not included in the sale." For your safety as a buyer, please note the following information! The following points will be carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers will be subjected to a documented test run. Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) Kedozimg Hepfx Ag Asdu We will be happy to answer any further questions you may have by telephone.

Condition: used, Weiss   Type: WK3 600/0-M   Weiss Climate Test Chamber, Water-Cooled Type series WK3-../0 with SIMPAC* control system   Test chamber volume: approx. 600 liters   Test chamber dimensions: Height 950 mm, Width 800 mm, Depth 800 mm External dimensions: Height 1995 mm, Width 1090 mm, Depth 1660 mm   Data for operation:   Test chamber lighting: LED 24 V, 6.8 W / Halogen bulb 2 x 24V, 50W Rated voltage: 1/N / PE AC 230 V ±10% 50 Hz Rated power: 2.3 kW Rated current: 10 A Fuse (on customer's side): 16 A, slow-blow Protection class, control cabinet and operating panel: IP 54 Max. heat dissipation to environment: 1200 W   Sound pressure level approx. measured at a distance of 1 m from the front, 1.6 m high: 46 dB(A)   Data for temperature tests: Temperature range: -5°C to +90°C   Temperature deviation over time in the center of the usable space: ± 0.1 to ± 0.5 K Temperature deviation spatially: ± 0.5 to ± 1 K   Temperature gradient Kedpjziywrofx Ag Ajdu (according to IEC 60068-3-5) Temperature change rate Heating: 0.6 K/min Cooling: 0.3 K/min   Heat compensation at +20 °C to +50 °C: 200 W   Data for climate tests:   Temperature range: +10°C to +90°C Dew point range: 4 to +89.5 °C Humidity range: 10 to 98 % RH Temperature deviation over time in the center of the usable space: ± 0.1 to ± 0.3 K Temperature deviation spatially: ± 0.5 to ± 1 K Humidity deviation over time: +1 to +3 % RH   Refrigerant: R-404A   Weight: 610 kg   For your security as a buyer, please note the following information!   The following points will be carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. After successful inspection, the chambers will be subjected to a test run, which will be monitored with calibrated equipment.   Condition: used   Scope of delivery: (See picture)   (Changes and errors in the technical data are subject to change!)   We will gladly answer any further questions you may have by telephone.

Condition: new, table length 3000 mm table width 1500 mm table height 850 mm side-clamping surface: 200 (Höhe) mm weight 1517 kg SIEGMUND authorized dealer - all items available! Product description - high quality steel S355J2 + N + plasma nitriding - Material thickness approx. 24.5 - 27 mm - Hole Ø 28 mm - Drilling surface 100x100 mm grid - Rounded corners, edges and holes - Height of side wall 200 mm - Distance between holes in side wall 50 mm - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise structures The welding tables are provided with a scale as standard. Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Furnishing: Kdsdpfx Ajxaa Nvjg Aou - 28 hole pattern / dimensions 3000 x 1500 x 200 mm - Plasma nitrided version with scale - incl. 6x base equipment