Used Littell Lm2E Shear for sale (1,572)

Condition: good (used), Year of construction: 1995, Sheet width 6040 mm Sheet thickness 4 mm Total power requirement 12 kW Machine weight approx. 22 t Additional information - Specification - Back stop Ppsdpfezly Euex Aflsw - Roll shelf

Condition: excellent (used), Year of construction: 1994, Josting Veneer Pack Cutting Machine Type: EFS 2300 L - Year 1994 Ppodpfsxgbwzox Aflsw Cutting length: 2,300 mm Maximum insertion height: 80 mm FIESSLER safety light curtain Alignment light for cutting position display Parallel fence motorized adjustment, fine adjustment via handwheel Connected load: 7.7 kW Weight: 2,700 kg Dimensions: 3,610 x 1,700 x 1,680 mm Ex-works: - available immediately -

Condition: new, Year of construction: 2026, TBS – Manual Sheet Metal Shears Manual sheet metal shear Suitable for cutting construction steel, aluminum, copper, zinc, and plastic High-quality steel cutting blades with a hardness of HRC55-60 Equipped with two operating handles Features a front support surface with a scale and an adjustable rear stop 800 mm table height Scope of delivery: 2 operating handles Model TBS 2000-12 Item No. 3746020 Technical data Working width max. 2000 mm Sheet metal thickness max. - material tensile strength 400N/mm² 1.25 mm Pedpfx Ajcnxc Reflspw Rear stop range 0-300 mm Weight 511 kg Dimensions in mm 2450 x 1100 x 1050 mm

Condition: used, Year of construction: 2008, sheet width 3050 mm plate thickness 30.0 mm column arm 100 mm cutting angle 1,5° - 3,5° adjustment speed max. 200 mm/s Ppjdpfozkvx Iex Afljw weight 36.000 kg dimensions 4700 x 3535 x 2980 mm

Condition: used, Year of construction: 1996, sheet width 3050 mm Ppsdozl E S Hjpfx Aflew plate thickness 10 mm 11 kW range L-W-H 4000 x 2220 x 1830 mm weight 6.300 kg

Condition: ready for operation (used), Year of construction: 2004, sheet width 3050 mm plate thickness 13.0 mm thickness at "Niro-steel" 8.0 mm cutting angle 0.5 - 2.5 ° no. of strokes 8 - 25 Hub/min back stop - adjustable max. 1.000 mm Control SIEMENS Number of downholders 13 Stk. oil volume 300 ltr. engine output 21.0 kW weight 8700 kg. Ppodszkvx Uspfx Aflow range L-W-H 3950 x 2200 x 1900 mm Features: - Robust electro-hydraulic sheet metal shear * Design: "Circuit-guided" - NC electro-motorized backgauge * with SIEMENS NC control unit "OP 7" * Input of target and actual position values - NC electro-hydraulic cutting angle adjustment - Manual cutting gap adjustment, from the front via handwheel - Recessed grips in the front support table - Front finger guard - 1x long side fence - 1x long support arm - 1x freely movable foot switch - Original operating instructions (NL)

Condition: new, functionality: fully functional, Year of construction: 2026, operating hours: 10 h, machine/vehicle number: ShearOne H3000-6_14, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, back gauge: 1,000 mm, overall weight: 7,000 kg, total length: 2,700 mm, total width: 4,500 mm, total height: 2,100 mm, warranty duration: 36 months, travel distance X-axis: 1,000 mm, cutting length (max.): 31,000 mm, cutting width (max.): 3,100 mm, Equipment: safety light barrier, Hydraulic guillotine shear ShearOne H3000-6 from CoastOne in Finland Cutting length - 3,100.0 mm Pjdpfxezlhhks Aflspw Sheet thickness 400 N/mm² - 6.0 mm Sheet thickness 700 N/mm² - 4.0 mm Cutting angle ° - 0.5 - 2.0 Back stop - 1000 mm

Condition: new, EMERSON Diana Blue Line Hydraulic Guillotine Shear – Brand New The Diana Blue Line hydraulic guillotine shear is a robust and versatile machine tool designed for high-precision sheet metal cutting across a wide range of sizes and thicknesses. Thanks to its quick blade clearance adjustment and heavy-duty construction, it delivers outstanding performance and reliable operation even in demanding production environments. It is the ideal solution for fabrication shops and industrial companies seeking productivity, precision, and ease of use. Technical Specifications Cutting capacity: from 4 mm to 10 mm, depending on the model. Cutting length: from 2,000 mm to 4,000 mm. Ppjdpfoznlbmex Afljw Cutting angle: 1.5°. Cutting cycles: up to 20 strokes/min, depending on material thickness and cutting length. Motor power: from 5.5 kW to 15 kW. Standard Equipment German-made hydraulic valve system for reliable, long-lasting performance. Siemens electrical system. Rear gauge with position display (up to 600 mm). Quick blade clearance adjustment. Integrated cutting line illumination. Safety protection devices for operator safety. Front support arms for sheet positioning. High-strength steel blades for clean and accurate cuts. Key Features Heavy-duty frame for maximum stability during operation. Simple and intuitive adjustments. High productivity thanks to fast cutting cycles. Premium-quality components ensuring long service life and reliability. Optional Equipment Pneumatic sheet support system. Extended rear gauge travel up to 1,000 mm. Single-axis automatic positioning system for greater cutting accuracy. Custom Configurations The Diana Blue Line is available in a variety of configurations to meet the specific production requirements of every customer. For a customized configuration, technical consultation, or a tailored quotation, please contact our team. We will be pleased to recommend the solution that best suits your production needs.

Condition: used, LVD Shear Type HST C-10/31 Ppsdpex Tqtbofx Aflsw Capacity 3000 x 10

Condition: used, Sheet Metal Working Machine Set Available November 2026 • Hydraulic Press Brake – OMAG Brand: OMAG Bending length: 4,000 mm Ideal for sheet metal bending • Hydraulic Guillotine Shear – OMAG Brand: OMAG Cutting length: 4,000 mm Ideal for cutting sheet metal Podpfoznkl Rex Aflspw

Condition: good (used), functionality: fully functional, Year of construction: 1987, Used 3-meter plate shear from Haco Atlantic Type: ATS 3006 Pedpezi Rl Tofx Aflspw Capacity: 3100 x 6 mm Electric back gauge Electric cutting angle adjustment Year of manufacture: 1987

Condition: used, SHEET METAL LENGTH 6000mm SHEET METAL THICKNESS 20mm Pjdpfehy Amnox Afljpw IN TOP CONDITION

Condition: good (used), Demolition shears, demolition pliers, hydraulic demolition shears -Demolition shears: Hydraulic demolition shears, without hydraulic power unit Ppodpfjzkkc Iex Aflow -Opening width: 290 mm -Transport dimensions: 950/800 (H140 mm -Weight: 94 kg

Condition: excellent (used), functionality: fully functional, Year of construction: 2009, machine/vehicle number: 00521120, MACHINE SPECIFICATION Maximum cutting thickness 1.5mm Maximum Cutting length 1030mm Shear angle 3 degrees Working pressure 7 to 10 bar Ppedpfx Aozia Nzjflew Dimensions (L x W x H) 1380mm x 1210mm x 1300mm Approximate weight 195Kg MACHINE EQUIPPED WITH Squaring arm Rear guarding Trailing footswitch

Condition: used, Manufacturer: DIGÉP Podpfex H Rzrsx Aflepw Model: DLB 7/2550

Condition: used, Max height: 2000mm Pedpsvpfp Defx Aflepw Max diameter: 6mm

Condition: used, Year of construction: 2006, sheet thickness (max.): 6 mm, Brand: DURMA Type: VS 3006 Year of manufacture: 2006 Ppedpowrx Tajfx Afljw Maximum sheet width: 3080 mm Maximum sheet thickness: 6 mm

Condition: good (used), punching pressure 60.0 t punching cross-cut in cmm 31 in 15 mm Ppodpjzkbnnjfx Afljw square edge steel 40.0 mm L-beam 160 x 80 mm flat steel 400 x 16 mm throat 400 mm round bar steel 40.0 mm total power requirement 5.5 kW weight of the machine ca. 1.950 kg dimensions of the machine ca. 1700 x 1050 x 1980 mm good / well-maintained condition (!!) Features: - Stop / support table at the punching station - Support table at the notching station - Flat steel blade, 375 mm long, with four cutting edges, - also for cutting angle iron at 45° - Material support table with stop bar on the flat steel shears - Section steel blade for cutting 90° angle steel as well as round and square steel - Scraper, swiveling - Square notching device with stop table - 2 foot switches and electrical controls - Connector for external engagement - Integrated hydraulic power unit - Three-phase motor, 400 volts, 50 Hz - Various insert tools such as punches and dies

Condition: good (used), functionality: fully functional, Capacity: 250 x 6 mm Electric, variable angle adjustment, independently adjustable from 30 to 130 degrees Drive: Hydraulic Blade height and depth adjustable via potentiometers Table dimensions: 1200 x 900 mm Motor power: 5.5 hp Connection voltage: 380V Length: 1000 mm Width: 1200 mm Height: 1400 mm Weight: 1200 kg VAT/margin: VAT: The price shown is exclusive of VAT (VAT is deductible for businesses) Psdpfxszi Hi Ue Aflopw Please note: The information on this page has been obtained and compiled to the best of our knowledge and belief, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract, and we advise you to verify all relevant details.

Condition: used, functionality: fully functional, LVD Plate Shear MV 31/3.5 – 3100 × 3.5 mm – Guillotine Shear Manufacturer: LVD Company, Gullegem (Belgium) Type: MV 31/3.5 Max. cutting length: 3100 mm Max. plate thickness (steel): 3.5 mm Drive: hydraulic Rear gauge: electric, 750 mm Machine weight: approx. 4000 kg Ppjdpezi Hhwofx Aflew Dimensions: approx. 4000 × 1800 × 1600 mm

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, actuation type: hydraulic, Technical data: Cutting length: 3100 mm Max. sheet thickness, St 42: 10 mm Max. sheet thickness, INOX/V2A: 6.0 mm Cutting angle: 2.0° Stroke rate: 12 per minute Rear gauge range: 5.0 mm to 1000 mm Motor power: 22 kW Hydr. clamps: 17 pcs Oil tank capacity: 170 l Max. oil pressure in the cylinder: 260 kg/cm² Standard accessories: - CNC-controlled, motorized rear gauge. Travel distance 1000 mm. With backlash-free ball screws. - Table construction, closed design, consisting of interchangeable support plates including ball rollers - Manual cutting gap adjustment, centrally operated on the right side stand - Electric motor: 400 V, 50 Hz, 3-phase - Single or continuous stroke - Tip function for lowering the top beam, e.g., for adjusting the cutting gap - Side gauge 90°, 920 mm long, measuring length from the cutting line 1000 mm - 2 additional support brackets Design of the two front support brackets with scale, T-slots, and tilting cams - CNC control Cybelec "Cybtouch 8W" for automatic adjustment - of the cutting gap (option) - of the rear gauge - of the cutting length Further programming functions: - Step repetition - Piece counter - Finger protection light curtain at the front instead of a safety grille, allowing an unobstructed view of the cutting zone After interrupting the cutting function of the shear and the clamps by activating the light curtain, the cutting function is immediately released again when the operator's hand(s) are no longer in the danger area. The reset button does not need to be pressed. - Rear gauge - retraction - "Return to sender", smallest sheet part 100 mm x 160 mm (not possible with sheet support type "A", only with sheet support "U") RS-232 interface, LCD screen 128 x 64 mm. - 1 set of blades mounted on the machine for cutting steel with a strength of 450 - 700 K/mm². Cutting edges: top blade 2, bottom blade 4, material grade "K110", manufacturer: Böhler Germany/Austria - Individually acting hydr. clamps with plastic inserts - Oil level indicator - Oil filling - Display of the cutting line by blade illumination and wire - Operating hour counter - CE conformity - Operating manual, spare parts list, wiring diagram, hydraulic diagram - Painting, 3-color: Body: RAL7015 slate gray; Side covers: RAL7035 light gray; Finger protection: RAL3003 ruby red Ppedpfxozlpaho Aflow Included: Motorized cutting gap adjustment. Controlled via CNC Cybelec "Cybtouch 8W".

Condition: used, functionality: fully functional, Year of construction: 2008, Equipment: CE marking, angle stop, documentation/manual, emergency stop, finger protection, foot remote control, safety light barrier, type plate available, The machine is in good condition, fully functional, and can be tested on site. Ppodpjzkgf Eofx Aflsw

Condition: good (used), design: Cutmatic strip width: max. 2.150 mm Ppedpowzvlxsfx Aflew strip thickness: max. 6 mm

Condition: good (used), Year of construction: 1999, cutting width: 6.050 mm cutting thickness: max. 4 mm length stop range: 10 - 1.000 mm Podpowzvntjfx Aflepw

Condition: used, Year of construction: 1986, functionality: fully functional, Hydraulic CNC plate shear Fischer DHS 10 / 3000 Maximum cutting length / sheet width: 3,000 mm Maximum sheet thickness, normal steel: 10 mm Maximum sheet thickness, stainless steel / V2A: approx. 6 mm Control: CNC-controlled back gauge Machine weight: approx. 7.5 to 9.0 tons Psdpfx Afezl Twqoljpw Installation dimensions L x W x H: approx. 3.80 m x 2.20 m x 2.00 m