Used Lns Sprint for sale (1,696)

Condition: ready for operation (used), Year of construction: 2010, operating hours: 29,200 h, This Gildemeister Sprint 20-8 was manufactured in 2010. It features a cooling system with a 600l capacity and 50µm filter, alongside a high-pressure pump option of 8 or 20 bar. The machine includes a Bristol B270/E oil mist separator and an IEMCA Boss 332E bar loader for 3m bars. With a chip discharge height of 1,250mm, it's designed for efficient operation. Contact us for more information about this machine. Specification • Control system: Fanuc 310i-S • Mechanical and electrical preparation for fire extinguishing system • Coolant system suitable for oil (max. 32 cSt) and emulsion • Coolant tank capacity: 600 liters • Coolant filtration: 50 µm • Coolant chiller unit • Coolant pump pressure: 8 bar • Coolant pump pressure: 20 bar • Chip conveyor • Chip discharge height: 1250 mm • Bar loader: IEMCA Boss 332E • Maximum bar length: 3 m • Oil mist separator: Bristol B270/E • Sliding headstock travel: 80 mm • Tooling on slides Njdpfxsx D H I To Ac Tocu • Tool breakage detection system • Machine commissioning (max. 3 days) • Spindle bore: 25 mm (upgraded) • Machine duty hours: 29,200 h Machine Benefits Technical Machine Benefits • Chip discharge height: 1250mm Extra Information Machine still under power

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, machine/vehicle number: 82632, overall weight: 90 kg, 12-needle universal gantry embroidery machine for single motif and border embroidery, as well as tubular fabric and cap embroidery, fully equipped for ready-to-use operation: Control unit: T8-2 control panel Thread cutter: integrated Embroidery speed: max. 1,200 stitches/min (standard/free arm), max. 1,000 stitches/min (cap) Embroidery area (D x W): 310 x 460 mm (single motifs), 300 x 400 mm (tubular goods), 70 x 360 mm (caps), depending on frame type and cap form Power supply: single-phase AC 230 V, 50 Hz Scope of delivery: - Software-orientated electronic T8 control unit - Thread trimming device - Light barrier - Cross laser - 1 free-arm frame holder Ncsdsyrqywepfx Ac Tou - 1 cap frame drive unit - 2 cap frames 360 mm incl. clamping aid - 1 border frame 460 x 310 mm

Condition: ready for operation (used), Year of construction: 2007, operating hours: 32,700 h, functionality: fully functional, travel distance X-axis: 165 mm, rotational speed (max.): 5,000 rpm, bar passage: 65 mm, controller model: SIEMENS 840 D, Equipment: chip conveyor, TECHNICAL DETAILS X1 travel: 165 mm Z1 travel: 220 mm X2 travel: 165 mm Njdpfx Acsymmdbo Tjcu Z2 travel: 150 mm X3 travel: 165 mm Z3 travel: 650 mm Y3 travel: 80 (+50/-30) mm Bar capacity: 65 mm Main and sub-spindle speed: 5,000 rpm Turrets: 3, each with 12 stations (all driven) Driven tool speed: 4,000 rpm Tool holder: VDI 30 with drive, DIN 5480 MACHINE DETAILS Control: SIEMENS 840 D Operating hours Power-on hours: 52,511 h Spindle hours: 32,700 h EQUIPMENT C-axis Y-axis Coolant system Chip conveyor Bar feeder TOP Automazioni XF 375

Year of construction: 2008, condition: ready for operation (used), Main spindle: max. bar capacity: 65mm, draw tube bore: 75mm, collet holder diameter: 160mm, centering chuck diameter: 175mm, spindle nose: 140mm, max. speed: 5000/min, nominal torque (S1): 150Nm, nominal power (S1): 22kW. Counter spindle: draw tube bore: 45mm, centering chuck diameter: 175mm, spindle nose: 140mm, max. speed: 5000/min, nominal torque (S1): 100Nm, nominal power (S1): 16.8kW. W2 axis counter spindle: travel: 690mm, max. speed: 30m/min, max. acceleration: 5m/s², nominal thrust (S1): 5000N. X1 axis: travel: 165mm, max. speed: 30m/min, max. acceleration: 5m/s², nominal thrust (S1): 5000N. Z1 axis: travel: 220mm, max. speed: 30m/min, max. acceleration: 5m/s², nominal thrust (S1): 5000N. X2 axis: travel: 165mm, max. speed: 30m/min, max. acceleration: 5m/s², nominal thrust (S1): 5000N. Z2 axis: travel: 150mm, max. speed: 30m/min, max. acceleration: 5m/s², nominal thrust (S1): 5000N. X3 axis: travel: 165mm, max. speed: 40m/min, max. acceleration: 10m/s², nominal thrust (S1): 2400N. Z3 axis: travel: 678mm, max. speed: 30m/min, max. acceleration: 5m/s², nominal thrust (S1): 5000N. Y3 axis: travel: 80mm (+50/-30), max. speed: 30m/min, max. acceleration: 5m/s², nominal thrust (S1): 5000N. Workpiece unloading (UA-WA): max. unloading weight: 4daN, max. unloading diameter: 70mm. Total number of tool stations: 12, tool holder diameter: 30mm, driven positions: 12, max. speed of driven tools: 4000/min, nominal torque (S1-n = 0/min): 17Nm, nominal power (S1-n = 4000/min): 2.9kW, control: Siemens 840D, operator panel: ErgoLine, screen: color TFT 19 inch, number of spindles (C-axes): 2, number of axes: 10, number of channels: 4. Operating hours: 70,035h power on, 48,657h in production, machine operates with cutting oil. With documentation and Bar Loader FMB Turbo 8-80 XT 3200. An on-site inspection is possible. Ncedpfx Ajyln Ekec Tju

Condition: used, Year of construction: 1999, Holz-Her SPRINT 1411 edgebander Description Workpiece thickness min./max. 6/45mm Automatic edge feeder (coil up to 5mm) Workpiece min. 60mm Workpiece length min. 180mm Cartridge glue system (short heat up time 2-3 min.) End trimming unit Flush trimming unit Njdpsw Ebrxefx Ac Tocu Scraping unit (flat) Buffing (brushing) unit CE (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). (Alle Änderungen und Irrtümer in den technischen Daten, Angaben und Preisen vorbehalten! Keine Garantie auf gedruckte Daten!. Verfügbarkeit vorbehaltlich Zwischenverkauf).

Condition: used, Year of construction: 2007, Number of controlled spindles (C axes): 2 Number of controlled axes: 8 Number of channels: 3 Max. bar diameter: 65 mm Bore in tie rod: 75 mm Chuck diameter: 175 mm Spindle nose: 140 mm Max. speed: 5,000 rpm Nominal torque: 191 Nm Nominal power: 20 kW DATA FOR THE W2 AXIS OF THE COUNTER SPINDLE Stroke: 690 mm Rapid traverse: 30 m/min Max. acceleration: 5 m/s² Nominal force: 2,400 N X1 AXIS DATA Stroke: 165 mm Rapid traverse: 40 m/min Max. acceleration: 10 m/s² Nominal force: 2,400 N Z1 AXIS DATA Stroke: 678 mm Rapid traverse: 30 mm Max. acceleration: 5 m/s² Nominal force: 5,000 N Y1 AXIS DATA Stroke: 80(+50/-30) mm Rapid traverse: 30 m/min Max. acceleration: 5 m/s² Nominal force: 5,000 N X2 AXIS DATA Stroke: 165 mm Rapid traverse: 30 m/min Max. acceleration: 5 m/s² Nominal force: 5,000 N Ncedpfsydfq Isx Ac Tsu Number of tool stations: 12 Tool holder diameter: 30 mm Driven stations: 12 mm Max. speed of driven tools: 4,000 rpm

Condition: used, Metal band saw blade, band saw blade -unused original packaging Ncjdpfx Ajb A S Tvjc Tju -Number: 7x sheets available -Price: per piece -Toothing: 4/6 K-POS -Dimensions: 2835/27/H0.9 mm -Weight: 0.6 kg/piece

Condition: used, Metal band saw blade, band saw blade, metal saw band -Quality: unused, original packaging -Toothing: 3/4 K-POS -Price: per piece -Number: 6x sheets available -Dimensions: 3830x27x0.9 mm Nsdpfxefvkm No Ac Tocu -Weight: 0.8 kg/piece

Condition: ready for operation (used), Year of construction: 2007, operating hours: 23,567 h, functionality: fully functional, spindle speed (max.): 5,000 rpm, travel distance X-axis: 165 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 678 mm, bar passage: 70 mm, controller model: Fanuc 310i, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS X1 travel: 165 mm Y1 travel: 80 mm (+50/-30 mm) Z1 travel: 678 mm X2 travel: 165 mm Z2 travel: 640 mm Main spindle Max. speed: 5,000 rpm Max. bar capacity: 70 mm Ncsdpfox Af Dkjx Ac Tju Draw tube bore: 75 mm Torque: 191 Nm Power: 20 kW Sub-spindle Max. speed: 5,000 rpm Draw tube bore: 42 mm Torque: 108 Nm Power: 17 kW Turret 1 & 2 Tool stations per turret: 12 live Live tools: 4,000 rpm MACHINE DETAILS Control: Fanuc 310i Number of controlled axes: 8 Dimensions & Weight Machine dimensions: 4,400 mm x 2,000 mm x 2,300 mm Machine weight: 8.8 t Chip conveyor weight: 750 kg Operating Hours Automatic mode: 23,567 h Power-on hours: 51,273 h EQUIPMENT Chip conveyor 2 x collet chucks Parts conveyor Extraction unit Bar feeder FMB Turbo 8-80 / 3200

Condition: used, Year of construction: 2008, weight of the machine ca. 8,8 t dimensions of the machine ca. 4500x1990x2300 mm Number of controlled spindles (C axes): 2 Number of controlled axes: 8 Number of channels: 3 Max. bar diameter: 65 mm Bore in tie rod: 75 mm Chuck diameter: 175 mm Spindle nose: 140 mm Max. speed: 5,000 rpm Nominal torque: 191 Nm Nominal power: 20 kW DATA FOR THE W2 AXIS OF THE COUNTER SPINDLE Stroke: 690 mm Rapid traverse: 30 m/min Max. acceleration: 5 m/s² Nominal force: 2,400 N X1 AXIS DATA Stroke: 165 mm Rapid traverse: 40 m/min Max. acceleration: 10 m/s² Nominal force: 2,400 N Z1 AXIS DATA Ncedpfx Aeyat Hvoc Tju Stroke: 678 mm Rapid traverse: 30 mm Max. acceleration: 5 m/s² Nominal force: 5,000 N Y1 AXIS DATA Stroke: 80(+50/-30) mm Rapid traverse: 30 m/min Max. acceleration: 5 m/s² Nominal force: 5,000 N X2 AXIS DATA Stroke: 165 mm Rapid traverse: 30 m/min Max. acceleration: 5 m/s² Nominal force: 5,000 N Number of tool stations: 12 Tool holder diameter: 30 mm Driven stations: 12 mm Max. speed of driven tools: 4,000 rpm Translated with (free version)

Condition: used, Year of construction: 1995, machine/vehicle number: 9511/5376, workpiece height (max.): 40 mm, working width: 1,200 mm, number of spindles: 1, table width: 1,300 mm, table height: 900 mm, working height: 900 mm, pressure: 6 bar, workpiece width (max.): 1,200 mm, KOCH drilling and dowel insertion machine Type SPRINT PTP Workpiece dimensions Workpiece length (Y) 100 - 800 mm Workpiece width (X) 20 - 1200 mm Workpiece thickness (Z) 10 - 40 mm Machine equipment - Horizontal drilling station with one drilling spindle -Drill holder Ø 10 mm - Dowel hole blow-out and extraction system Nsdpfx Asrc A Nwoc Tocu - Glue application and dowel insertion station with a DW34 dowel tool for dowels Ø 8 mm - ELC electronic glue monitoring system - Vibratory conveyor - Glue pump 1:1 - Workpiece support table 1300 mm wide - 1 stop each left and right - Mechanical digital displays for height adjustment (workpiece thickness) -PC positioning control

Condition: refurbished (used), Year of construction: 2005, functionality: fully functional, stack height: 30 mm, paper weight (max.): 1,000 g/m², product length (min.): 500 mm, product width (max.): 350 mm, Equipment: CE marking, No reserve price - guaranteed sale to the highest bidder! Bidding obligates the buyer to collect the equipment by 17/10/2025. As these are floor-level machines, extraction is straightforward. The offer includes one tb sprint B 312 VP and one tb sprint 304 QSM! Both machines were fully overhauled in 2023. --- tb sprint B 312 VP TECHNICAL DETAILS - Stations: 12 - Variable stack height: up to 30 cm - Formats: max. 35 x 50 cm, min. 6.5 x 10 cm - Paper weights: 18 to 1,000 g/m² - Throughput: up to 3,200 cycles/h MACHINE DETAILS - Electrical - Voltage: 3/N/PE 400V - Frequency: 50 Hz - EQUIPMENT - CE marking - Jogger bridge as a removable transfer to connecting machine - Manual feed station left - Lateral air blast - Individually adjustable single suction and blow nozzles - Controlled air separation and blast - Photocell sheet miss-feed detection per station - Electromechanical double-sheet detection at the delivery (motorized adjustment) - Overlapping shingle conveyor for transverse transport - Paper jam detection for transport table - Table illumination - Manual feed station right - Delivery jogger for standard or offset stack, selectable via switch - Total and pre-set counters - Digital speed display in cycles/h, infinitely adjustable --- tb sprint 304 QSM TECHNICAL DETAILS - Formats: max. 35 x 50 cm, min. 6.5 x 15.5 cm - Smallest booklet: 6.5 cm spine length x 6.5 cm - Throughput: up to 3,100 cycles/h (format and paper dependent) Stapling - Stitching heads: 2 slim heads for standard stapling up to 5 mm (Hohner Universal) - Fold-down boxes: complete with fold-down boxes and wire spools - Automatic stapling thickness adjustment - Block stapling: up to maximum format - Cross adjustment: of the staples relative to the fold Folding - Fold system: frictionless knife fold with automatic thickness adjustment and re-pressing for approx. 120 sheets of standard 80 g/m² paper - Channel punch-out: single for block stapling Trimming - Front trim: upper and lower knives incl. air blast for trims to 6.5 cm and offcuts greater than 1.5 cm Ncsdpfx Asxb Dbxsc Tsu - Format adjustment: stepless for front trim - Head and foot trim: 3–20 mm each for approx. 80 sheets of standard 80 g/m² paper - Knives: upper and lower - Waste paper box: included - Continuous operation: same formats as 303 QSM Delivery - Shingle conveyor: shortened version with double-sided motorised feed and continuously adjustable shingle spacing - Delivery angle: format-adjustable for booklets and block stapling MACHINE DETAILS - Electrical - Voltage: 3/N/PE 400V - Frequency: 50 Hz - Machine Configuration - Version: Quick Set motorised (QSM) - Feed rollers: with upper belt transport system - Vacuum belt: included - Motorised format changeover: included - Fine adjustment: two handwheels (independent for head and foot) - Size readout: two digital counters, 0.1 mm increments - Motorised alignment: to collating machine

Condition: reconditioned (used), Year of construction: 2001, machine/vehicle number: 315/0-110, functionality: fully functional, Control panel, top Edge feeder 1902 Glue application station 1906 Cutting unit 1902 Nsdpfx Aceh Ux Sus Tocu Printing unit 1816 Cutting assembly 1918 Milling assembly 1942M Rounding draw knife 1929 Form milling assembly 1983 Surface draw knife 1964 Smoothing assembly 1940 Weight approx. 970 kg Compressed air connection, 6 bar Extraction connection, Ø 120 mm Length approx. 5300 mm

Year of construction: 2012, condition: excellent (used), Machine equipment with 2 working fields. 2 workpieces can be inserted independently of each other. Workpiece dimensions - length 110 - 800 mm - width 20 - 1700 mm - height 14 - 60 mm - Working height 900 mm Machine structure - 1 x horizontal drilling station 0,9 kW. Drill speed 7.200 rpm - drilling depth max. 30 mm - Drill depth 10 mm - total drill length 85 mm - 2 x glue application and dowel insertion station - 2 x dowels, dowel projection 15-20 mm - dowel center distance 96 mm - 2 x oscillating conveyor dowel - 1 x glue pump 18:1 - 2 x electronic glue control ELC - workpiece support table 1700 mm - 8 x workpiece clamping cylinders - Center stop for 4 working fields - Central lubrication with hand pump for grease lubrication - NC positioning of the height adjustment of the drilling and doweling station (Z-axis) - axis with position control, travel speed 12 m/min Ncsdjmrqriopfx Ac Tsu KOCH Numeric positioning control with 1 NC axis (X)

Year of construction: 1995, condition: reconditioned (used), multi-spindle drilling machine Koch 25 automatic spindle drill spacing 32 mm setting in the X and Y axes and using a ruler. The machine has been overhauled. Machine type SPRINT Ncjdpfxekytcfj Ac Teu 4kW motor. cylinder stroke 300 mm year of manufacture 1995 machine complete and ready to work Heads 25 spindeln pins size width between pins 32 mm standard

Condition: good (used), Year of construction: 2005, Straight Machine PQC-U: Print Quality Control Unit Nsdpfx Acoyvlg Ij Tjcu KPC: Semi Autmatic Plate Change Chromed Impression Cylinder Chromed Plate Cylinder Powder Sprayer Automatic Blanket Washing Device Automatic Ink Roller Washing Device Plate Cylinder Cocking Impression Account: 45 Mio.

Condition: excellent (used), Year of construction: 2022, operating hours: 11,543 h, functionality: fully functional, machine/vehicle number: 8107000628B, CNC lathe SPRINT 32 - 8, year 2022, with IEMCA bar feeder CNC control: Fanuc 32i-B Main spindle: Max spindle bore: 32 mm Max spindle speed: 8,500 rpm Power: 7.5/5.5 kW Sub spindle: Max spindle bore: 32 mm Max speed: 8,500 rpm Power: 3.7/2.2 kW Ncodpfx Aoxfq I Hec Teu Travel axes: X1 70mm, Y1 405mm, Z1 100mm, X2 300mm, Z2 200mm, Y2 135mm Tool holders: Slide 1: 4 x internal machining, 6 x external machining, 4 x driven tools Slide 2: 4 x internal machining, 4 x driven tools Total power requirement: 16 kVA Dimensions (L x W x H): 2,309 x 1,448 x 2,087 mm Weight: 3,450 kg

Condition: used, Holz Her Sprint 1312 FÜ + PU Heavy-duty design – edge thickness 0.4 - 12 mm PLC screen control Pre-milling unit for application before the gluing section Fully automatic edge magazine for roll and strip material Glue application station for cartridges + PU bonding automatic tracing nozzle Workpiece height 6-55 mm End trimming unit for roll and strip material up to 12 mm edge thickness with adjustment from 0-10° angle of the trimming saws Milling unit, flush milling up to 12 mm, radius milling – bevel milling - 15° motorised - 4 axes Scraper unit for bevels and radii with 2 pneumatically operated scraper holders Ncsdpfjx Eilqjx Ac Tsu pneumatic infeed and outfeed Flat scraper unit – finishing Spray device – PU Machine in TOP CONDITION Available from stock Lieboch

Year of construction: 2015, condition: ready for operation (used), - USED - FIBER LASER CUTTING MACHINE WITH PALLET CHANGER X-AXIS TRAVEL: 3048 mm Y-AXIS TRAVEL: 1524 mm Z-AXIS TRAVEL: 70 mm Njdexcqrgjpfx Ac Tecu MAX ADMITTED LOAD: 750 Kg/m WORKING AREA: 3000 x 1500 mm SOURCE: IPG Fiber 4000 ; 4000 W CONTROL UNIT: ByVISION WEIGHT: 13000 Kg

Year of construction: 2015, condition: ready for operation (used), - USED - FIBER LASER CUTTING MACHINE WITH PALLET CHANGER X-AXIS TRAVEL: 3048 mm Y-AXIS TRAVEL: 1524 mm Z-AXIS TRAVEL: 70 mm MAX ADMITTED LOAD: 750 Kg/m Nsdpovcr Tpjfx Ac Tecu WORKING AREA: 3000 x 1500 mm SOURCE: IPG YLS-4000 ; 4000 W CONTROL UNIT: ByVISION ACCESSORIES: PORTABLE HANDWHEEL NOTE: AUTOMATIC NOZZLE CHANGER

Condition: repair required (used), Year of construction: 2008, operating hours: 4,000 h, functionality: limited functionality, Shotblasting machine for plates and europrofiles. 2.6 m width, 0,5 m height, 12 m infeed and 12 m outfeed motorised rollers. Machine is in working condition but needs a specialist that can do some refurbishments. Some refurbishments made already: - new suction ventilator motor, new turbine blades, interior protection plates like new, new elevator belt, new coupling between 1 turbine and motor. Needs refurbishments: - electrical cabinet (machine runs with a new controlling system, old control panel is not setup and not functional) Nodpfx Acjvgbcue Tocu - brush repair (present but defective - we are not using it) - electrical connections and sensors (some of them present but not used)

Condition: good (used), FKS PrintBind KB 2000 Book Binder This machine is 100% functional and ready to use. Manufactured by FKS Hamburg, Germany. Capable of binding books, brochures, pads, prescriptions, etc. A very handy machine, ideal for digital printing. The machine has a convenient base and a built-in compressor. Technical specifications: Maximum format: 320 x 310 mm Spine thickness: 60 mm Capacity: approx. 320 books/h Weight: 186 kg 230V power supply Nsdpfx Acjzday De Tecu Material detection sensors Automatic cover detection and automatic cover clamp Spine milling Simple operation via LCD panel Adjustable cover clamping force Infinitely variable glue thickness adjustment Includes user manual and compressor.

Condition: used, functionality: fully functional, machine/vehicle number: WDB9061351N501447, mileage: 456,000 km, first registration: 10/2011, fuel type: diesel, empty load weight: 2,810 kg, maximum load weight: 690 kg, overall weight: 3,500 kg, tire size: 225/75/16/C, tire condition: 60 %, axle configuration: 4x4, wheelbase: 4,420 mm, next inspection (TÜV): 01/2027, fuel: diesel, fuel tank capacity: 90 l, color: white, driver cabin: day cab, gearing type: mechanical, number of gears: 7, number of seats: 3, total length: 6,700 mm, total width: 2,120 mm, loading space length: 4,200 mm, loading space width: 2,100 mm, loading space height: 2,000 mm, Year of construction: 2011, Equipment: ABS, airbag, car registration, central locking, compressor, electric window regulation, electronic stability program (ESP), fog lights, had accident, onboard computer, parking heater, power assisted steering, power mirror, sliding door, spoiler, tail-lift, traction control, For sale: Ncjdpfx Acezcm H Is Tju One of several Mercedes-Benz Sprinter container trucks with a lift gate. It is in continuous operation and has been regularly serviced. The engine has undergone a major overhaul and is under written warranty. For more information, please contact us by email or call 886666896.

Condition: ready for operation (used), functionality: fully functional, first registration: 01/2008, fuel type: diesel, maximum load weight: 5,000 kg, next inspection (TÜV): 08/2023, Year of construction: 2008, For sale two Mercedes Sprinter vans with integrated MULLER unblocking equipment. Newly refurbished and in perfect working order. Ncsdpfjrckzcex Ac Tju One is painted in blue color, which consists of a MULLER equipment of 1500 liters, with remote control and a power of 130 liters and 160 bars. The mileage of this van is 359,000 km. The other one is painted in white, which consists of a MULLER equipment of 1500 liters, with remote control and a power of 130 liters and 160 bars. The mileage of this van is 314,000 km. Price per unit 28.000+VAT They are sold to certain body.

Condition: refurbished (used), Siasprint Prima 70x100 machine fully restored. Format: 70x100 Ncjdsxk T Elopfx Ac Tju Sartech is a company specialized in screen printing, automation, and robotics solutions, as well as the manufacturing of UV (electronic) or hot air tunnels.