Used Lns Used Lns Fox Ifs Absolute Ws 500, Year 2012, Oil Mist Extraction System, Internal No. 231316 for sale (92,123)

Condition: used, 2021 VetterTec 304L Stainless Steel Spray Drying & Flash Drying System Approximately 500 kg/hr evaporation rate with 316L stainless steel pressure nozzle atomizer Spray Chamber dimensions: 11'6" dia. x 28'8" high Hsdjzunvaopfx Anyeu Cyclone dimensions: 4'3" dia. x 21' high Bag Filter dimensions: 9'8" dia. x 28' high Designed for combustible powder service Drawings available via Dropbox Link Additional Information: The primary dryer is a VetterTec 138-inch diameter pressure-nozzle spray dryer with dehumidified inlet air, cyclone recovery, pulse-jet baghouse, and exhaust fan. It is paired with a 12-inch flash dryer polishing system for finishing moisture removal and product conditioning. Spray Dryer approximate evaporation rate: 500 kg/hr Flash dryer water removal: approximately 75–150 kg/hr Dry solids handling: 150–500 kg/hr, depending on product density and moisture Chamber Diameter: Ø3505 mm (138 in) I/S Chamber Height: Cylindrical section ≈ 3968 mm (156 in), Cone section ≈ 2679 mm (105 in) Approximate vessel height: 6.6 m (21.8 ft) Chamber Volume ~47 m³ Chamber Height ~6.65 m Atomizer: Single pressure nozzle (316L stainless steel) Airflow Pattern: Co-current, 10,000–18,000 m³/hr Cyclone Diameter: 1295 mm (51 in) Cyclone Weight: 1200 kg Rotary Valve: 8 in Construction AISI 304L Sanitary Components: FDA silicone gaskets, tri-clamps Design Temp: 200°C Design Pressure: +0.3 barg Design Vacuum: -20 mbar Estimated Evaporation: 450–600 kg/hr Bag Filter: - Pulse-jet cleaning system - Solenoid manifold - Pulse header - Blow tubes - Explosion vent panel - Vibrator - Rotary valve discharge

Condition: used, Year of construction: 2001, machine/vehicle number: LC651, Used KRONES filling line for Vodka - glass 6000 BPH - Year 2001Technical Specifications & Performance DataThis complete glass bottling line, engineered around Krones equipment, is optimized for still strong spirits in non-returnable glass bottles. Configured with a dedicated rinser, a vacuum filling monoblock, a dual-carousel cold-glue labeling and tax-stamp system, and tray-plus-film secondary packaging, it delivers consistent performance for premium spirits presentation.Year: 2001Nominal speed: 6,000 bph on 0.7L formatContainers: Non-returnable Glass bottles; shapes handled: round, flask, shtoffFormats supported: 0.2L, 0.25L, 0.37L, 0.375L, 0.5L, 0.7L, 0.75LRinser: Krones Varioject 1440-24-188; rotary, 24 nozzles; single-channel; fixed nozzles; pre-treated water; gravity draining; no air blowFiller-Capper: Krones Vacufill 960-024-124-V; vacuum filling for still spirits; 24 filling valves; capper with 4 headsClosures: ROPP aluminum and Guala non-refillableLabeler: Krones Prontomatic / Taxomat 720-9-3-180 TA; cold glue; pre-cut paper labels; U-shape tax stamp 160 x 20 mmPacker: MEYPACK VP410; tray + filmConveyors: Krones Synco S bottle conveyors; Krones pack conveyorsControls: Siemens S7 PLC; electrical cabinets includedAdvanced Automation & Control SystemsThe line integrates centralized automation using a Siemens S7 PLC for reliable sequencing of rinsing, vacuum filling, labeling, and packaging. Electrical cabinets are included, supporting line interlocks, safety circuits, and device control. The rotary platforms and mechanical cam systems in the labeling/tax-stamping station ensure repeatable precision at rated speeds, while format-specific change parts support quick, accurate format transitions.PLC/HMI: Siemens S7 PLCControl architecture: Centralized line control with machine-to-machine interlocksSafety: Emergency-stop circuits and guarding typical of Krones rotary equipmentChangeover: Format parts for multiple glass shapes and volumesProduction Line Integration CapabilitiesDesigned for cohesive in-line operation, this used bottling line connects rinsing, vacuum filling, cold-glue labeling with tax stamping, and tray-plus-film packaging via Krones conveyor systems. It is ideal for second hand industrial packaging upgrades in beverage production focused on spirits in glass bottles. The broad format coverage supports brand portfolios requiring flask and shtoff bottles across multiple sizes.Machine typeManufacturer / ModelYearVarious EquipmentKrones Synco S (Conveyors) Hjdpfxez E Di Uj Anyju

Condition: used, Year of construction: 2017, power: 11 kW (14.96 HP), input voltage: 400 V, volume flow: 6,927 m³/h, overall weight: 1,080 kg, Equipment: CE marking, We are offering this used Höcker Polytechnik Vacumobil 350 mobile dust extraction system, model Vacumobil JT350-L, manufactured in 2017. Hjdpfxsznulzs Anysu If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: reconditioned (used), Year of construction: 1994, machine/vehicle number: 941108, functionality: fully functional, total height: 2,520 mm, total length: 2,580 mm, total width: 1,000 mm, Compact dust extraction system with 3 chip collection bags – WITHOUT fan Nominal air flow rate: 5000 m³/h with existing fan – up to 7500 m³/h possible Hjdpfozqan Hox Anyeu Filter area: 37.5 m² Filtration technology: AL-KO Opti-Jet system consisting of compressed air cleaning (sequence-controlled) and surface filtration Chip collection capacity: 8 solenoid valves Suction nozzle: DN 355 mm Compressed air connection: 1", compressed air, water and oil-free Minimum compressed air consumption 8.5 bar: 1140 NL/cleaning cycle Operating pressure: maximum 8.5 bar Fire extinguisher connection: 1 x 1 1/2" Dimensions WxD approx: 2572 x 981 mm Height approx: 2520 mm Weight without filter approx: 457 kg JET cleaning: A pressure surge on the inside of the filter achieves effective cleaning of the filter hoses on the outside. Easy maintenance: large access doors facilitate filter maintenance, additional inspection covers High-quality filter material: oil and water-repellent surface coating of the filter, for problematic dusts (paint sanding dust, wet dust), filter washable Uniform bag filling: infinitely adjustable distribution flaps enable uniform bag filling Suitable fan: see item no. 7458 D=250 mm - 5000 m³/h extraction capacity With a fan D=350 mm, up to 7500 m³/h extraction capacity is possible!!!

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, power: 7.5 kW (10.20 HP), volume flow: 43 m³/h, filter area: 43 m², Equipment: CE marking, documentation/manual, a SCHUKO dust extraction system with 5 metal containers and a 43 m³ filter area; can also be sold as a complete set including the entire installation. Hodpfx Aszzzg Ssnysu

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, total height: 3,500 mm, total length: 20,000 mm, total width: 2,500 mm, overall weight: 12,000 kg, Equipment: documentation/manual, The Modesta exhaust system is in good condition, is still installed, and can be seen in operation. It includes two automatic diverter valves, allowing you to choose whether to discharge into the bunker/silo or into two containers. Hjdpsx Ezlfofx Anysu

Condition: excellent (used), Year of construction: 1998, Hours: approx. 45,600 Hjdpfxozniq Ej Anyju 6 axles Location available upon request.

Year of construction: 1999, condition: used, machine/vehicle number: LC654, Used ALFA LAVAL oil production lineTechnical Specifications & Performance DataThis complete olive oil processing line is engineered for continuous production with a throughput of 2 tons per hour. Built around proven Alfa Laval technology, the line combines robust mechanical design with food-grade materials to ensure reliable operation and consistent oil quality. Its modular configuration streamlines the core olive oil extraction steps from washing and preparation through malaxation and separation.Overall capacity: 2 tons/hourDecanter centrifuge: Alfa Laval NX 17Disc separators: Alfa Laval 407, automatic (2 units)Malaxers (double): Stainless steel (3 units)Malaxer (small): Stainless steel, with paste pump P 60 (1 unit)Crusher: Stainless steelOlive elevator: Integrated feedingOlive washer: Pre-cleaning and debris removalElectrical control panel: Alfa LavalConveying: Various screw conveyors for paste and by-productsThe equipment list emphasizes sanitary stainless-steel construction, automated separation, and balanced material handling to minimize oxidation, protect product integrity, and support high-efficiency operation.Advanced Automation & Control SystemsAutomation centers on an electrical control panel that coordinates key process units for safe, consistent performance. Automated Alfa Laval 407 disc separators provide steady clarification with reduced manual intervention. Interlocks and standard operator safeguards support secure running and streamlined start/stop routines. The configuration is designed for straightforward parameter control, facilitating repeatable results across production shifts.Production Line Integration CapabilitiesThe line is configured for seamless integration from raw olive reception to downstream storage tanks and final packaging. Its modular equipment layout connects via screw conveyors, an olive elevator, and a washer, enabling continuous flow into the crusher, malaxers, decanter, and separators. This processing core can be paired with industrial packaging solutions or a used bottling line for vegetable oil filling into PET or glass containers, aligning with broader beverage production and food-oil packing environments.Machine type/categoryManufacturer / ModelYearOlive Washer—Olive Elevator—Olive CrusherStainless steelMalaxers (double)Stainless steel Hjdpsz E Dibofx Anyeu

Condition: good (used), Year of construction: 2016, functionality: fully functional, input voltage: 240 V, year of last overhaul: 2026, Equipment: CE marking, Machine in excellent condition Hodpfjzzmfysx Anyou

Condition: excellent (used), Year of construction: 2020, machine/vehicle number: 020020, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, suction capacity: 4,500 m³/h, total height: 2,000 mm, total length: 2,000 mm, total width: 1,000 mm, overall weight: 280 kg, For sale is a fully functional industrial dust extraction unit from HOLZING / MÜNALSAN, model RLA 125 VIBER. The unit is used, in good technical condition, and fully operational. It is ready for further use. The dust extraction unit is designed for industrial applications, including the extraction of dust, wood chips, and other contaminants generated during material processing. Technical data: Manufacturer: KMA Maszyny / MÜNALSAN Type: RLA 125 VIBER Year of manufacture: 2020 Serial number: 020020 Motor power: 3 kW Power supply: 400 V Frequency: 50 Hz Maximum capacity: approx. 4500 m³/h Unit weight: approx. 280 kg Solid, metal construction Installation with pipes and fittings as shown in the photos The unit has been inspected and is functioning correctly. The visual condition is as shown in the photos – normal signs of use, dirt, and wear are visible, but they do not affect the operation. We are selling the exact unit shown in the photos. It is possible to inspect the unit on-site before purchase. The stated price is indicative and does not constitute a binding offer. The final selling price will be determined individually after inspection and verification of the unit's technical condition. Hedpfxoz D Sm Es Anyou Due to its size and weight, personal collection is preferred. Transportation is also possible after prior arrangement.

Condition: excellent (used), Year of construction: 2022, machine/vehicle number: 31.07.109.22, functionality: fully functional, operating hours: 1,200 h, power: 3 kW (4.08 HP), input voltage: 230 V, input current: 20 A, input frequency: 50 Hz, type of input current: DC, volume flow: 1,450 m³/h, intake vacuum (max.): 2,400 mbar, suction capacity: 3,200 m³/h, intake manifold diameter: 160 mm, filter area: 20 m², noise level: 70 dB, actuation type: pneumatic, total height: 2,005 mm, total length: 1,775 mm, total width: 898 mm, overall weight: 370 kg, year of last overhaul: 2022, Equipment: CE marking, documentation/manual, PRICING & CURRENCY NOTICE FOR UK BUYERS: Headline price is €5,000 due to platform limits. Actual price is fixed at £4,250 GBP. UK Buyers: Fixed at £4,250 GBP via BACS bank transfer. No conversions. Overseas Buyers: Must clear into our UK bank as exactly £4,250 GBP net of all fees. 📌 COLLECTION LOCATION NOTICE: The machine is NOT at our registered account/billing address. Location: Private workshop just outside West Calder (rural area), West Lothian, Scotland. Access: Ample space and suitable access for vans, flatbeds, and collection couriers. Full Address: Provided directly to the buyer upon formal agreement of sale. Overview & Provenance: For sale due to a complete workshop closure. This premium Felder RL 160 clean-air dust extractor was purchased brand new directly from an official Felder dealership. One private owner from new. Meticulously maintained and looked after in a clean workshop environment. Clear Title & Ownership: Originally financed through Novuna over a 4-year term. All payments are fully complete as of August 2026. The machine is sold with 100% clear title, free from any financial encumbrances or liens. Official settlement confirmation can be shown upon request. Rare Single-Phase Configuration: Hjdszvh Dyopfx Anysu Factory-built single-phase (230V) machine. Maximum operational current draw of 19.7A (requires a 25A backup fuse circuit, typically running on a 16-amp industrial socket). Ultimate plug-and-play setup for high-end home workshops or sites without 3-phase power. Premium Factory Upgrades & Accessories: • Pneumatic Filter Cleaning: Factory-fitted Jet-Pulse automatic compressed-air cleaning system. Blasts dust from inside filters to ensure maximum, constant suction and extend filter life. • Integrated Mobile Chassis: Factory heavy-duty caster wheel kit for effortless movement. • Dry-Air Protection Kit: Inline moisture filter and integrated pressure gauge. Ensures air supply is clean, dry, and regulated, fully protecting filters from moisture damage. • Pneumatic Pipework: Extra lengths of plastic compressed-air piping included alongside currently fitted pipework for immediate setup. Technical Specifications: • Certification: H3 Certified (Residual dust < 0.1 mg/m³ for clean indoor workspace air). • Max Airflow: 3,200 m³/h • Intake Vacuum / Negative Pressure: 2,400 Pa • Extraction Port: 160 mm • Filters: Original Felder filters, used but in perfectly fine, clean operational condition. • Noise Level: Exceptionally quiet 70 dB operational sound pressure level. Transaction & Returns Terms: • Price: £4,250 (No VAT to add / Private Sale). • Payment: Strictly via secure Direct Bank Wire Transfer (BACS / IBAN / SWIFT). No PayPal, cheques, or cash-on-delivery couriers. • Shipping: Buyer must independently arrange, insure, and pay for all transport logistics. Machine released only once funds fully clear. • Returns: Private sale. Sold as described with no returns. Viewing and testing under power at the workshop is highly welcomed and encouraged.

Condition: as good as new (ex-display), Year of construction: 2025, Special price *available upon request New: With the frequency converter option, up to 45% state funding is possible. Combination of: mütek briquetting press MPP 60 + extraction unit MMJET 350 *Approved for indoor installation *Both individual machines are fully manufactured and in stock; they only need to be connected to each other 1. Technical data of briquetting press: Our best-selling briquetting press, a classic. + Proven, simple technology for extremely low failure rates + 25 years of experience, continuous development, and know-how + Several thousand machines in operation with satisfied customers Hsdpfod Su Hxjx Anyeu + Excellent price-performance ratio Commodity code: 84793010 Briquette diameter: 50 mm Front bushing: 50 mm Briquette stroke max.: 40 mm Briquette stroke opt.: 40 mm Throughput (material-dependent): up to 60 kg/h* *depending on the bulk density *based on a bulk density of 200 kg per cubic meter Motor power: 5.5 kW, 400 volts / 50 Hz / 3-phase Overall dimensions of the system: 2.2 x 1.1 x 2.8 m (L x W x H) Height - 2.8 m (special container) Delivery in 2 components possible Weight: approx. 1200 kg Oil quantity: 110 liters Silo diameter: 1000 mm Pump: 27 liters Hydraulic pre-compressor Option cooling press clamp: no Option cooling hydraulic oil: yes Option level monitoring: yes CE compliant 2. Technical data of clean air extraction unit MMJET 350: Extraction port diameter: 350 mm Motor: 11 kW Extraction nozzle on the left (when standing in front of the dust bin) Residual dust content:

Condition: used, Year of construction: 2009, operating hours: 2,503 h, machine/vehicle number: LC679, Used Tetra Pak TBA19 125 slim 7500 PPH - Year 2009Technical Specifications & Performance DataTetra Pak TBA/19 TBA 12SS (RCI) filling machine configured for aseptic carton filling and integrated straw application. Built in 2009 and reconditioned in 2017, this equipment is designed for high-output industrial packaging operations where accurate filling and reliable downstream pack presentation are required.Manufacturer: Tetra PakModel: TBA/19 TBA 12SS (RCI) 030V Production speed: 7,500 packs/hFunctions: Filling and straw applicationManufacturing year: 2009Reconditioned: 2017Documentation: Manuals availableAdvanced Automation & Control SystemsThis filling and straw application machine is intended for automated carton packaging workflows. The integrated process combines carton filling with straw application, supporting continuous product handling and coordinated operation within an industrial packaging line. Operators should verify interface configuration, safety circuits, utilities and control integration during installation and commissioning.Production Line Integration CapabilitiesSuitable for use as the primary filling station in a Tetra Pak aseptic carton packaging line. It can be integrated with upstream product preparation and supply systems, as well as downstream conveyors, accumulation equipment, secondary packaging machinery, coding systems and pallet handling equipment.Machine typeManufacturer / modelYearFilling MachineTetra Pak TBA/19 TBA 12SS (RCI)2009Various Equipment - Straw ApplicatorTetra Pak2009The machine supports streamlined handling of individual filled cartons and is suited to production environments requiring a compact filling and straw application process. Conveyor synchronization and downstream accumulation should be assessed according to the final packaging layout.Machine Condition & Maintenance HistoryThe machine was manufactured in 2009 and reconditioned in 2017. Manuals are available, supporting operation, maintenance planning and technical reference. The equipment is presented as ready for operation within a suitable prepared production environment.Operational Performance & VersatilityWith a stated capacity of 7,500 packs/h, this Tetra Pak machine is suited to beverage production and industrial packaging applications using carton packs. Filling and straw application are combined in the same equipment configuration, helping reduce handling steps between primary filling and consumer-ready pack preparation.As a second hand packaging solution, the machine can be considered for facilities seeking Tetra Pak c... Hodpfjz E Df Nsx Anyou

Condition: good (used), Year of construction: 2012, operating hours: 6,400 h, Jungheinrich DFG425S, duplo435, free-lift, side-shift forklift, 6400 hours, 2012. Hsdpez Da Tgofx Anysu A video can be sent via WhatsApp. We have a continuous stock; see our website. Prices are quoted ex Nuland. Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. All our deliveries are at trade prices in AS-IS condition without any guarantees (see our general terms and conditions). You can make a non-binding appointment for a viewing and/or test drive. Please call beforehand as we are not always available. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: used, Year of construction: 1999, functionality: fully functional, power: 3 kW (4.08 HP), input voltage: 400 V, volume flow: 2,780 m³/h, AL-KO Mobil-Jet 200, 3 kW, 400 V, year of manufacture 1999, 2,780 m³/h, connection diameter 200 mm, functional/can be demonstrated. Collection and loading will be carried out by the buyer. Piping can be included upon request. Hodpfx Anozx Swijyju Price: EUR 1,900.00 net, ex works.

Condition: excellent (used), Year of construction: 2024, For sale is a Felder RL-160 clean air extraction unit with a maximum airflow rate of 3200 m³/h. The extraction unit is in very good condition and has been inspected and refurbished by our qualified technicians. (Fully functional) Technical specifications: - Max. airflow rate 3200 m³/h - Filter area 10 m² - Extraction connection diameter 160 mm Hjdpfx Ajzy U Tijnysu - Manual filter cleaning - H3 dust-tested - Year of manufacture 2024 - Machine no. 31.11.049.24 The clean air unit is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: Clean air unit, extraction unit, extraction, clean air, RL Reference: R-A0117

Condition: good (used), functionality: fully functional, For sale is a compact and mobile Nestro dust extraction system for extracting wood chips and dust from woodworking machines. The mobile design allows for flexible use of the extraction system on different machines. The system features a filter and a chip collection bag and is particularly suitable for carpentry shops, joineries, and smaller workshops. Technical data: Manufacturer: Nestro Motor power: 1.1 kW Extraction connection: Ø 140 mm Mobile design Filter unit with filter bag Separate chip collection bag Direct extraction at woodworking machines Compact design Equipment: Filter bag Chip collection bag Extraction fan Hsdpfsztau Ejx Anyju Extraction nozzle Ø 140 mm Chassis with rollers Suitable for extraction, for example, on circular saws, milling machines, planing machines, and other woodworking machines – depending on the required air volume flow and extraction connection. Scope of delivery: Nestro dust extraction system Filter and chip collection bag Accessories as shown in the photos The machine can be inspected and tested under power after prior appointment. Transport is possible for an extra charge! The machine will be inspected before sale. For used machines manufactured in 2009 or earlier, the warranty will be excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sales, and changes are subject to change. All information without guarantee.

Condition: used, Year of construction: 2011, operating hours: 48,000 h, machine/vehicle number: IntNr231180, DMG Gildemeister CNC Multi-Slide Automatic Turning Machine MSL 60/7 Year of manufacture: 2011 Machine on-time: 56,000 hours Automatic cycle hours: 48,000 hours CNC control: FANUC 31i – Model A, 7 axes Technical specifications - Number of axes: 7 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 60 mm - Spindle speed: 5,000 rpm - Spindle drive power: 7.5 kW COUNTER SPINDLE (on turret) - Max. bar diameter: 42 / (60) mm - Spindle speed: 5,000 rpm - Spindle drive power: 3.7 kW Driven tools (turret): - Tool drive power: 3.7 kW Hodpfx Aoz E N S Uonysu - Max. speed: 6,000 rpm Back-side machining: - 4 fixed tool stations - Capacity for up to 14 tools possible Bar feeder: FMB Turbo 5-55 / 3200 / A Year of manufacture: 2008 Bar diameter: 5 – 55 mm Bar length: 3,200 mm Chip conveyor included Machine can be inspected under power by appointment. Technical data, details, and prior sale subject to change and error.

Condition: used, Year of construction: 2025, Nominal volumetric flow rate: 1,447 m³/h Hedpfx Anjz E Sz Eeyju Power: 2.2 kW Negative pressure: 2,200 Pa Filter area: 9.5 m² Diameter: 160 mm Dimensions: 1665 x 900 x 1980 mm Weight: 306 kg Storage location: Nattheim

Condition: used, Dust extraction system Hedpfjzu Alpox Anysu Manufacturer: Spänex Type: Year of manufacture: Technical data Note: The technical data and descriptions are copies of the original order confirmation from that time. The information is provided for informational purposes only and is not binding.

Condition: good (used), Year of construction: 2018, power: 0.55 kW (0.75 HP), AR Filtrazioni air purifier ARF 700 YB, model year 2018 and newer. The ARF series is designed for extracting and cleaning micro-dust and smoke. The air drawn in first passes through a sequence of metal filters and a synthetic filter, which retain the larger particles. In the next phase, the air is passed through a filter with very high filtration performance (HEPA filter H13) according to the European standard EN 1822, and is then completely purified before being released back into the environment. Dimensions: 460 x 500 mm, H 1,050 mm Weight: 80 kg Hodpfx Anev T Db Tsyou Airflow rate: 700 m³/h Connection: 100 mm #8347

Condition: good (used), Year of construction: 2008, TruBend 5085 press brake Hodpfxjy Shc Ds Anysu

Condition: used, Year of construction: 2003, Central extraction system Adlolph & Co. (JKF) with screw conveyor and rotary valve. Manufacturer: Adolph & Co. (JKF) Type: AC 2 LK Year of manufacture: 2003 Suitable for dust and chips Volume flow: approx. 16,000 m³/h With air recirculation 1 piece Sluice filter, galvanized - Year of manufacture 2003 - AC 2 LK - Filter area: approx. 150m² - Cleaning of the filters via a vibration motor - Filter housing made of galvanized sheet steel - 3 inspection doors - Pressure relief surfaces - Exhaust air connection according to local requirements - Filter base frame in welded steel construction, galvanized. - Including dry extinguishing line, C connection 3 pieces Extraction fans: 1 piece Manufacturer: JKF Type: JK - 40K L Motor power: 11.0 kW Speed: 2,400 rpm Air flow: ~ 10,800 m³/h 1 piece Manufacturer: JKF Type: JK - 30K L Motor power: 7.5 kW Speed: 2,900 rpm Air flow: ~ 7,500 m³/h 1 piece Manufacturer: JKF Type: JK - 30K L Motor power: 7.5 kW Speed: 2,900 rpm Air flow: ~ 7,500 m³/h1 piece Pipe components Air return Hjdjywd I Tepfx Anyju - incl. galvanized ducts - Must be supplemented for a new location 1 piece Control cabinet With PLC Siemens control, in dustproof sheet steel standard housing, designed as a wall cabinet.Designed for: Installation dimensions: - Length: 5,250 mm - Width: 1,300 mm - Height: 4,650 mm (may vary depending on equipment) Electrical connection value: - Approx. varies depending on number of fans - 400 V/50 Hz - Control voltage 230 V AC/24 V DC - Location, not in stock

Condition: like new (used), Year of construction: 2016, Solid fuel boiler. Hodey S E Nzopfx Anysu

Condition: new, functionality: fully functional, total height: 938 mm, total length: 2,000 mm, total width: 1,100 mm, overall weight: 100 kg, Equipment: CE marking, documentation/manual, type plate available, ISI-FLOW DESK Standard – 1000S – 1700 m³/h Extraction table, suitable for gluing, sanding, polishing, welding, or manual cutting. The ISI Flow Desk 1000 S extraction table is a simple standard workbench for extracting non-explosive, dry dust and gases. TECHNICAL DESCRIPTION: Possible extraction capacity: 1700 m³/h Work surface W/D in mm: W 980 / D 960 Work height in mm: H 638-938 mm Table load: 150 kg/m (wood, with evenly distributed load) Work surface: Wooden slats (optional steel, stainless steel, or plastic slats) Overall dimensions W/D/H in mm: W 1076 / D 1000 / H 938 (other lengths and depths available as options) Fan capacity: without fan Pipe connection: D=161 mm Color: RAL 7042/RAL 7011 Hjdpfx Anozdtqujyou Weight: 100 kg Application: The workbench is used for extracting non-explosive, dry dust and gases. It can be used as a gluing, sanding, polishing, welding, or manual cutting table. Your advantages of the ISI – Flow Desk series: - 8 device variants available - Simple connection to extraction system via nozzle at the end of the table - The design of the table allows working from 3 sides - Height adjustment - Wide range of assembly and connection accessories - Quality Made in Europe The ISI Air extraction table must not be used in conjunction with ATEX zones.