Used Lvd Ppeb 60 for sale (20,757)

Condition: good (used), functionality: fully functional, Year of construction: 1991, sheet thickness steel (max.): 16 mm, cutting length (max.): 6,000 mm, HYDRAULIC SHEAR LVD MVSB 62/16 Serial number 18478 Yom 06/1991 TECHNICAL SPECIFICATIONS Max. sheet thickness St45 16 mm Cutting length 6200mm Redpfsumhm Ajx Ad Aot Distance between uprights 6400mm Gap 60mm Range back gauge 1000mm Min. cutting angle 0.5 ° Max. cutting angle 2.5° Min. number of strokes/min. 6 Max. number of strokes/min 25 Min. blade clearance 0.05 mm Max. blade clearance 1.6mm Motor power 30kW Approx weight 35000 Kg LxWxH 7100x2400x3000mm Accessories included; ELGO P85 “GO-TO” for back gauge Electrical adjustment of back gauge 1000mm 1 x Front support 2mtr, one with 90° square arm front support L2000mm Foot pedal Ball bearings on table Inclinable back gauge with manual hydraulic pump

Condition: reconditioned (used), functionality: fully functional, Year of construction: 1997, sheet thickness steel (max.): 16 mm, cutting length (max.): 4,000 mm, HYDRAULIC SHEAR LVD MVSB 40/16 Serial number 24159 Yom 1997 TECHNICAL SPECIFICATIONS Max. sheet thickness St45 16 mm Cutting length 4050 mm Distance between uprights 4250 mm Range back gauge 1000mm Min. cutting angle 0.5 ° Max. cutting angle 2.0 ° Min. number of strokes/min. 7 Max. number of strokes/min 26 Min. blade clearance 0.5 mm Max. blade clearance 1.6 mm Motor power 22 kW Approx weight 20500 Kg LxWxH 4800x2170x2750mm Accessories included; Electrical adjustment of back gauge 1000mm with Go-to controller blade clearance and cutting angle adjustable. 1 x Front support 1500mm, one with 90° square arm front support 1 x Front support of 1500mm Redpfx Aouipu Eed Aot Foot pedal

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1998, Hydraulic shear LVD HST-C 40/6.35 Year of construction 1998 Serial number 25379 Technical specifications Max sheet thickness 6.35 mm Cutting length 4050 mm Back gauge range 1000 mm Cutting angle 0.5°-2° Blade clearance 0,05-0.8 mm Number of strokes per min 10-45 Number of hold dawns 21 motor 7.5kW weight 9500 kg oil 150l Voltage 3 x 380V included : ELGO P85 for back gauge Redpjxcf Snsfx Ad Ast Security norms CE 1 square arm from support L1000mm 1 extra support L1000mm

Condition: ready for operation (used), HYDRAULIC SHEAR LVD MVCS 6200x13 Serial number 6931 Yom 1977 TECHNICAL SPECIFICATIONS Max. sheet thickness St45 13 mm Cutting length 6200mm Distance between uprights 6400mm Gap 300mm Range back gauge 1000mm Min. cutting angle 0.5 ° Max. cutting angle 2.5° Min. number of strokes/min. 9 Max. number of strokes/min 40 Min. blade clearance 0.5 mm Max. blade clearance 1.3mm Motor power 40PK Approach weight 35000 Kg LxWxH 7300x2500x3000mm Rsdpfx Asw Ungtsd Aet OPTIONS; Electrical adjustment of back gauge 1000mm blade clearance and cutting angle adjustable. 1 x Front support 10000mm, one with 90° square arm front support 6 x Front support of 1500mm Foot pedal Manual inclinable back gauge

Condition: excellent (used), Year of construction: 1996, Excentrical press: Capacity: 100 ton Clutch: airclutch Gooseneck depth: 340 mm Slide adjustment: 10 > 130 mm Command: 400 mm Max distance plate -- slider: 300 mm Dimensions of the table: 950 x 630 mm Rodpfshtiwhjx Ad Aot Dia of passage in the table: 200 mm Dimension sole of the coul. (L x W): 560 x 320 mm Variable stroke: 10 > 130 mm Motor power: 8.5kW Length G -- D: 1500 mm Width Front -- Rear: 2380 mm Height: 2800mm Weight: 9.5 ton

Year of construction: 1986, condition: ready for operation (used), OFFERED FOR SALE DUE TO OVERCOMPLETION: Well maintained second hand hydraulic press brake, brand LVD, equipped with front support Model PPN 125/4000 S630 Built in 1986 TECHNICAL CHARACTERISTICS Max. pressure force 1250kN Max. oil pressure 310bar Max. working length 4000mm Max. passage between the uprights 3150mm Max. stroke of the ram 150mm Distance table / ram 350mm Rsdpfx Ader Ezv Ue Aet Unloading 250mm Width of table 180mm Closing speed 90mm/s Working speed 7mm/s Return speed 55mm/s Motor power 10kW Approximate weight 13500kg Steered axes Y1,Y2,X STURING CNC TOUCH S-630 (New 2019) Very user-friendly Full touch screen (10") control with 2D graphic simulation controlled axes: Y,X,R cnc backgauge X-duo - R back gauge with 2 movable fingers ADDITIONAL TOOLS F10 H180 26° 7x508mm + 1x550mm in sections Multi-V M90 L4000mm Asking price excluding transport costs (for buyer). Note: only serious bids will be responded to!

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1994, Capacity: 250 x 6 mm Electric variable angle adjustment, independently adjustable from 30 to 130 degrees Hydraulic drive Blade height and depth adjustable via potentiometers Table dimensions: 1200 x 900 mm Motor power: 5.5 hp Connection voltage: 380V Rodpfxsxrv Hbj Ad Ast Length: 1000 mm Width: 1200 mm Height: 1400 mm Weight: 1200 kg VAT/margin: VAT: The listed price is excluding VAT (VAT deductible for businesses) Note: The information on this page has been compiled to the best of our knowledge, however, its accuracy cannot be guaranteed. Accordingly, it does not constitute representation or contract, and we recommend you verify all relevant details.

Condition: used, Year of construction: 1980, pressure 50 t chamfer lenght 2500 mm distance between columns 2050 mm throat 200 mm table width 140 mm table height 750 mm distance table - lower edge of ram 300 mm max. ram stroke 100 mm closing speed 9 - 160 mm/sec return speed 55 mm/sec voltage 380 V / 50 Hz engine output 4,1 kW total power requirement 5 kW weight of the machine ca. 3,5 t Rodpoxc Nwzofx Ad Aet dimensions of the machine ca. 3, x 1,2 x 2,6 m Equipment: • manuel back stop • upper and lower tools Split , lower tool 2000 mm long • 2 manual operation / foot switch

Condition: used, Year of construction: 1980, pressure 50 t chamfer lenght 2500 mm distance between columns 2050 mm table width 140 mm table height 750 mm total power requirement 8 kW weight of the machine ca. 4,5 t dimensions of the machine ca. 3, x 1,2 x 2,6 m Equipment: • manual back stop • upper and lower tools Redpfx Ajxddqxed Aet • 2 manual operation / foot switch

Condition: used, Year of construction: 2003, punching pressure 16 t plate thickness 8 mm plate length max. 1250 mm sheet width - max. 1000 mm engine output 13 kW control Cadman CNC Rsdpfx Ajd Ih Sped Aet voltage 400 V weight of the machine ca. 8,3 t dimensions of the machine ca. 3600 x 2300 x 2000 m

Condition: good (used), Year of construction: 2013, LVD Orion 3015 Plus laser cutting system, Year of manufacture 2013, LVD control system, X/Y/Z travel 3080/1555/240 mm, Sheet metal size 3000 x 1500 mm, Max. sheet metal weight 750 kg, Redjwcft Uopfx Ad Aet Laser power 2.5 kW, CO2 laser, Max. cutting capacity steel/stainless steel/aluminum 16/10/6 mm,

Condition: excellent (used), Year of construction: 2020, operating hours: 2,260 h, machine/vehicle number: 38854, sheet thickness (max.): 6 mm, sheet thickness aluminum (max.): 8 mm, sheet thickness steel (max.): 6 mm, back gauge: 1,000 mm, back gauge speed R-axis: 100 mm/s, back gauge travel distance R-axis: 1,000 mm, back gauge travel distance Z-axis: 1,000 mm, power: 18.5 kW (25.15 HP), overall weight: 23,000 kg, total length: 70,000 mm, total width: 25,000 mm, total height: 20,000 mm, cutting length (max.): 6,200 mm, Near mint condition Serial number 38854 Manufactured 12/2020 Pump hours: 2260 hours Cutting hours: 26 hours Number of cuts: < 13,000 cuts Cutting length 6200 mm Rjdpjqpfwrsfx Ad Ast Sheet thickness 6.35 mm Sheet thickness for stainless steel 4.0 mm Cutting angle 0.5 - 2.5°. Number of cuts 10-30 strokes/min. Oil capacity 350 liters. Backgauge - adjustable 1,000 mm Motor power 18.5 kW Weight 23,000 kg. Dimensions L-W-H 7200 x 1950 x 1680 mm Equipment : - NC-controlled electric backgauge - with LVD digital positioning display - electric sheet support with holding function - plate clamp for fragile plates - rear light curtain protection - adjustable backgauge before cutting begins - automatic cutting angle adjustment - automatic blade clearance adjustment - electric cutting length limitation - 1 angle arm 1500 mm - 3 support arms 1500 mm - Ball-bearing support shelves - removable & retractable front arm stops - operating instructions

Condition: good (used), Year of construction: 1992, machine/vehicle number: 20106, Offer 25100 Rjdpfjwbgizex Ad Ast Technical specifications: - Pressure capacity 200 t - Working width 3050 mm - Clearance between columns 2550 mm - Table width 180 mm - Throat depth 250 mm - Installation height 400 mm - Feed speed 80 mm/sec. - Working speed 6.7 mm/sec. - Retraction speed 67 mm/sec. - Ram stroke 150 mm - Adjustment range of fixed stops 120 mm - Drive 400 V 14.5 kW - Space requirement approx. W 3800 x H 2980 x D 1700 mm - Weight approx. 11500 kg - With: - Backgauge with 2 stop fingers - Deer foot tool - 4-way universal die - Two-hand control panel, foot switch

Condition: good (used), Year of construction: 1995, For sale is a good used guillotine shear from LVD. This machine was produced in Germany in 1995. guillotine shear LVD HST - C 40/6 Manufacturer: LVD Type: HST - C 40/6 Cutting capacity in steel 6,35 mm Maximum length 4050 mm Cutting angle 0.5 to 2 ° Cadence 10 to 45 strokes / min 7.5 kW motor Weight 9500 kg Rjdpfx Adoxwmugs Ast

Condition: like new (used), Year of construction: 2018, functionality: fully functional, Set for robotic laser welding Scope of supply: Rjdpfx Asrfucfod Aot 1 x Laserline LDM1200-60 (1320W).(2011). 1 x 2 Way Hyfra CHILLER.(2018). 1 x HIGHYAG LASER WELDING HEAD. Machine can be inspected. Very good condition. Connected, can be tested. Shipping to EU countries is our responsibility and the shipping cost is free.

Condition: used, Year of construction: 1993, sheet width 1550 mm plate length 2525 mm plate thickness 6,4 mm Punching capacity 200 kN speed of positioning X 50 m/min speed of positioning Y 50 m/mih no. of strokes 200 / 400 Hub/min control MNC 32000 ATC 22 Pos total power requirement 7,5 kW Redpfjvh Ndpsx Ad Aet

Condition: used, Year of construction: 1982, machine/vehicle number: 10628, sheet width:3000 mm plate thickness:4 mm Rsdpfx Aecxxzlod Ajt distance between columns:3300 mm rear stop:700 mm strokes per minute:19 - 50 Stk/min engine output:7,5 kW total power requirement:ca.10 kW weight of the machine ca.:ca.5 t dimensions of the machine ca.:3,7 x 1,5 x 1,9 m

Condition: new, Our SAPI "Mammut" pressure blasting unit with a 60-liter tank capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the permanently installed pressure regulator. A water separator is also permanently installed on the blasting unit; this separates moisture from the compressed air and prevents the blasting media from clumping due to excessive moisture. Our safety shut-off device is included for safe operation of the sandblaster. This starts and stops the blasting process by operating the hand lever mounted on the blasting hose. Included in delivery: SAPI pressure blasting unit "Mammut 60 L" 1" pressure regulator, permanently mounted 1" water separator, permanently mounted SAPI safety shut-off Technical specifications for the pressure blasting unit: Precisely adjustable from 0.1 - 12 bar TÜV-tested with certificate 1" fixed piping, internal and external Rubber-coated metal cone with rubber seal Generous hand hole Rubber-coated metal cone with rubber seal Large hand hole Rubber-wheeled chassis Abrasive dosing valve (suitable for all common blasting media) Capacity 60 l Total height 1,130 mm Bowl diameter 360 mm Total diameter 700 mm Weight approx. 60 kg ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT with safety shut-off Fast shut-off and start-up times, while complying with the regulations of the professional associations (VBG 48) Pressure setting Can be precisely adjusted before the actual blasting process, continuously adjustable from 0.1 to 12.0 bar. Reduced abrasive consumption, as the pressure vessel remains permanently pressurized, thus eliminating unnecessary abrasive run-on. Upon restart, the full blasting pressure is immediately available at the nozzle and does not need to be slowly built up. This significantly reduces abrasive consumption and significantly reduces wear on the blasting hose. No moisture (condensate) builds up in the vessel, as the vessel remains constantly pressurized and is not vented and vented with every start and stop. This process also offers other advantages, such as: Redpfswc Afhox Ad Ast Optimal abrasive dosing with a hardened fine dosing valve Lower compressed air consumption, thus significantly reducing fuel consumption (diesel) One-person operation, as the blasting pressure is constantly displayed by the vessel pressure and can be easily adjusted on the pressure gauge without prior start-up. No failure-prone components such as control valves, diaphragms, or seals, making it easy to maintain and reliable. Only the blasting hose needs to be checked in the safety shutoff and replaced if necessary.

Condition: like new (used), functionality: fully functional, control type: CNC control, LVD BENDER 3000 X 110 CYBELEC CNC 3 AXES Redpfxjxf H Rqo Ad Aet MOTORIZED REGISTER USED MACHINE INTERNAL CODE: SVR 249

Year of construction: 2000, condition: excellent (used), LVD Delta 1250 in perfect condition with many tools. Rjdpfx Aergqrnod Aot X Y - 2500 x 1250, plus reposition 2 x Indexing head

Condition: good (used), Year of construction: 1993, functionality: fully functional, total width: 2,550 mm, total length: 4,900 mm, total height: 1,800 mm, overall weight: 7,500 kg, Manufacturer: LVD Model: HST 40/6 Location: Strojrem, Križevci Year of production: 1993 Rodpfx Adjvtl Nre Ast Bending length: 4050 mm Max bending thickness at 45 kg/mm²: ~6 mm Working stroke: 1000 mm Machine dimensions: 4900x2550x1800 mm Machine weight: 7500 kg Machine rated power: 12 kW

Condition: ready for operation (used), Year of construction: 2003, operating hours: 21,200 h, functionality: fully functional, machine/vehicle number: 190332, clamping force: 1,000 kN, injection weight: 15 g, ejector force: 66,000 N, ejector stroke: 225 mm, plate length: 795 mm, No reserve price – guaranteed sale to the highest bidder! Auction of a 3-color injection molding machine! TECHNICAL DETAILS Clamping force: 1,000 kN Tie bar spacing: 420 x 420 mm Mounting platens: 795 x 795 mm Mold height: 300 mm Maximum platen distance: 950 mm Ejector stroke: 225 mm Ejector force: 66 kN Injection Unit 1 (150 series) Screw diameter: 15 mm Injection volume: 17 cm³ Shot weight: 15 g Injection pressure: 2,750 bar Injection Unit 2 (150 series) Screw diameter: 15 mm Injection volume: 17 cm³ Shot weight: 15 g Injection pressure: 2,750 bar Injection Unit 3 (60 series) Screw diameter: 15 mm (high abrasion resistant) Injection volume: 17 cm³ Shot weight: 15 g Injection pressure: 2,080 bar MACHINE DETAILS Control system: Selogica Clamping unit: hydraulic Operating hours: 21,200 h FEATURES 1 vertical injection unit, mounted on supports for the 2nd injection unit instead of on the clamping unit tie bars, manually operated, working position adjustable between 70 and 250 mm 2 x core pull Open nozzle 15 mm wear-resistant, without heating band (1st injection unit 150) Technology level 2 – servo-regulated hydraulic system with two variable displacement pumps Technology level 3 hydraulic system with three variable displacement pumps for simultaneous movements Heating band for open nozzle Injection unit 150 for vertical injection into the mold parting line for 2-component processing Rsdpfxjy Hki Aj Ad Ast Position-regulated screw with control valve on the injection unit, including regulated back pressure Position-regulated screw with control valve for multi-component machines – for injection unit 2 Injection unit 60 for horizontal injection into the mold parting line as the 3rd injection unit For VE 906/00, injection unit 60 in L-position: unit lowered by 70 mm Plasticizing cylinder assembly 15 mm (without nozzle), with advanced feed and pressure reducing valve Open nozzle 15 mm wear-resistant, without heating band (L-position) Nozzle tip with radius 15 (L-position) Heating band for open nozzle (L-position) Position-regulated screw for the third injection unit Documentation/manual

Condition: used, Slitting line McKay 60''x0.625''x100,000Lb Make: McKay Material Thickness: .065″ – .625″ Maximum Material Width: 66″ Weight Capacity: 100,000Lb Coil ID: 24″ – 30″ Exit ID: 30″ Coil OD: 90″ Maximum Speed: 450 fpm Rsdolwtzyjpfx Ad Aet Direction: L-R Pit Type Entry Coil Car Double Mandrel Uncoiler with Hold-Down Roll Hydraulic Peeler Driven Pinch Rolls Coil Flattener with 200HP Drive Slitting Head with 16″ Arbor Diameter 250HP Drive Knives & Tooling Two (2) Scrap Choppers Recoiler with Over-Arm Separator 250HP DC Drive Exit Pit Type Coil Car Electrics, Hydraulics Controls, Tooling

Condition: used, Coil Width: 12″ – 60″ Rjdpfsihf Tpjx Ad Aet Material Thickness: .015″-.135″ Coil ID: 20″-24″ Speed: 180 fpm Direction: Left to Right Entry Floor Standing Coil Car Mandrel Uncoiler with Powered Expansion Motorized Hold-Down Roll Feed-Up Drive Hydraulic Peeler 9-Roll Coil Straightener with 4″ Work Rolls Driven Entry Pinch Rolls 40HP Motor Adjustable Hump Table Mechanical Shear Belt Conveyor with Positive Stop Device Air Gate Sheet Stacker, with Two Section of Gravity Rolls

Condition: used, Cut-to-length line Pro-Eco with Cassette Type Precision Leveler 60 x .187 x 50,000Lbs (A3789) Maker: Pro-Eco Excellent conditions SPECIFICATIONS: MAX WIDTH 60" MAX THICKNESS 187" MANUFACTURER - PRO-ECO YEAR - 1985, REINSTALLED 2002 WIDTH RANGE - 8" to 60" GAUGE RANGE - .024" to .187" WEIGHT CAPACITY - 50,000# (25 TON) COIL OD - 36" to 72" COIL ID - 19" to 24" SHEET LENGTH - 24" to 168" SHEET WIDTH - 8" to 62" PACK HEIGHT - 30" (INCLUDING DUNNAGE) PACK WEIGHT - 20,000# LINE DIRECTION - RIGHT to LEFT LINE SPEED - 50 to 300 FPM (VARIABLE) LEVELER TYPE - MECHANICAL WEDGE STYLE w/ TWO CASSETTES LINE COMPONENTS: FOUR ARM ENTRY STORAGE TURNSTILE FLOOR LEVEL COIL LOADING CAR CANTILEVERED MANDREL UNCOILER w/ WATER COOLED BRAKE PIVOTING AND TELESCOPING PEELER BLADE ENTRY PINCH ROLLS Rodjthg Dispfx Ad Ast ROLLER TYPE SIDE GUIDES ENTRY CROP SHEAR SIDE TRIMMER HYDRAULIC SERVO DRIVE (CURRENTLY NOT OPERATIONAL) MECHANICAL STYLE LEVELER FRAME W/ 200 HP MOTOR CASSETTE #1 - 19 ROLL, 2.50" DIAMETER, 5 HI, 7 BACKUP FLIGHTS CASSETTE #2 - 19 ROLL, 1.75" DIAMETER, 5 HI, 7 BACKUP FLIGHTS STRIP INSPECTION AND CARRY-OVER TABLE w/ NON-MARKING ROLLS LOOPING PIT QUADRANT TABLES w/ NON-MARKING ROLLS ROLLER TYPE STRIP SQUARING TABLE PRECISION ROLL FEEDER W/ 55 HP MOTOR HIGH SPEED MECHANICAL CUT OFF SHEAR W/ 40 HP MOTOR BLANK INSPECTION CONVEYOR w/ NON-MARKING BELT REJECT BELT CONVEYOR w/ NON-MARKING BELT AND SCRAP CART 14 FOOT AIR FLOAT STACKER w/ SQUARING GUIDES AND END STOP 14 FOOT STACKER LIFT CONVEYOR w/ END DISCHARGE ROLLERS 14 FOOT STACKER RUNOUT CONVEYOR w/ END DISCHARGE ROLLERS OPERATOR CONTROL STATIONS UPDATED AC CONTROLS w/ ALLEN BRADLEY "CONTROL LOGIX" PLC (2006) UPDATED DRIVE CONTROLS w/ SIEMENS "SIMOREG" CONTROLLERS (2006) CLOSED LOOP HYDRAULIC SYSTEM CLOSED LOOP WATER COOLING SYSTEM