Used Maggi Engineering Rubber Feed Roller for sale (41,864)

Condition: excellent (used), power: 23 kW (31.27 HP), fuel type: diesel, color: orange, first registration: 08/2017, General information Year of construction: 2017 Model year: 2017 Operating hours: 3.032 Serial number: H2008891 Technical information Number of cylinders: 3 Drive: Wheel Weights Empty weight: 2.510 kg Carrying capacity: 185 kg GVW: 2.695 kg Functional Working width: 120 cm CE mark: yes Condition Technical condition: very good Visual appearance: very good Damages: none Financial information Price: On request Product safety Manufacturer: Hamm DE Other information Track width: 120 cm Additional information Please contact Ernst van Hek for more information = Additional options and accessories = - Power steering - Rotating beacon - Spotlight front - Spotlight rear = Remarks = Lsdpfjzwmgpox Amzjhn Hamm HD12VV Tandem Roller (2017) Hours: 3,032 hrs | Operating Weight: 2,695 kg Engine: Kubota D1503 (22.9 kW / 31 HP at 2700 rpm) Condition: Excellent, fully tested and ready for work!

Condition: refurbished (used), Year of construction: 2002, functionality: fully functional, power: 45 kW (61.18 HP), overall weight: 4,700 kg, color: grey, Maximum chipping height: mm 200 Feed-in width: mm 650 Feed rollers: units 3 Rotor fly circle: mm 600 Chip length approx.: mm 20–30 Output capacity: 18–22 cubic meters/hour of wood chips Chipping knives: units 2 Feed motors: kW 2 x 3 Lsdoynzg Hepfx Amzshn Net weight approx.: kg 4700 Feed: horizontal Machine frame: steel, gas-shielded welded Rotor: steel, gas-shielded welded, dynamically balanced Bearings: oversize roller bearings Bearing housing: steel, flange housing Feed rollers: steel, special toothed Chip discharge: located below the machine Machine grate: (sieve) for post-shredding of oversized pieces Drive pulley: matched to main motor, N = 1500 rpm Hydraulic system: comprising hydraulic pump, diaphragm accumulator, cylinder, pressure gauge, control valves for lifting the upper feed roller Feed system: by 2 geared motors, manufacturer NORD GETRIEBE

Condition: good (used), Hacker feed roller, conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, support rollers Lhjdpedl E Iijfx Amzen -Feed roller: serrated -Roll diameter: 270 mm -Transport roller width: 626 mm -Total length: 626 mm -Shaft mount: 80 mm -Quantity: 1x piece available -Weight: 137 kg

Condition: excellent (used), CATALOGUE NUMBER 7967 TECHNICAL DATA - max. width of workpiece 1100mm - max. height of workpiece 170mm 2 sanding units: 1) metal roller with ribs for calibration 2) rubber roller with ribs + backing pad + metal roller – from above: - slip rubber roller - sanding unit (two units on one motor) 15kW - slip rubber roller - guide rubber roller - tape blowing – from below: - 2 slip metal rollers - conveyor belt - 2 slip rubber rollers - pneumatic tape oscillation - grinding thickness potentiometer - electric table lifting + manual (for precise adjustment) - pneumatic brake - 2 types of feed speed - working pressure 6-8 bar - dust extraction nozzle diameter 2x140mm - overall dimensions L/W/H 1830x1670x1950mm - weight 1160kg ADVANTAGES – Italian made Lhodpfx Amezruttjzsn – 2 sanding units – unpainted – used sander, in perfect condition Net price: 72900 PLN Net price: 16955 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to significant fluctuations)

Year of construction: 2004, condition: refurbished (used), Precision feed system for strips up to approximately 100 mm wide and 2 mm thick. Feed force: 400 N. Repeatability: +/- 0.04 mm. Ledpfx Aog Iiuxemzjhn

Condition: used, Year of construction: 2006, functionality: fully functional, machine/vehicle number: 14061094-02, workpiece weight (max.): 2,200 kg, total width: 4,480 mm, total length: 4,450 mm, total height: 1,600 mm, air pressure: 6 bar, We offer this used KMW Engineering A4PH-3228-0,2 4-head welding machine of PVC window frames. Used in single/morning-shift production only. First owner. In 2022 main mechanical parts were replaced by KMW. Cost 22000€ Machine is disconnected and stored in fabrication hall. I can send video of operation when it was part of fabrication process. Lodps Aa Rm Aofx Amzshn Year of construction: 2006 (2022 reconstructuction) Supply voltage: 400 V Operating power: 11 kW Frequency: 50 Hz If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Year of construction: 2018, We offer used PROMAG 106617-PW-5.00 roller conveyors, automatic roller conveyors, manufactured in 2018. The price is per meter; we currently have 5-meter sections available (a large quantity of 2000 meters). Type: 106617-PW-5.00 Year of manufacture: 2018 Product number: 106617/46/2 Power: 0.48 kW Lodpfxezbrbbs Amzehn Power supply: 230/400 V Frequency: 50 Hz Protection class: 54 Load capacity: 320 kg Weight: 244 kg Dimensions and parameters: - Overall width: 490 mm - Working width: 370 mm - Roller diameter: 80 mm If you have any questions or require additional information, please send a message or contact us by phone.

Year of construction: 2021, condition: used, Manufacturer : IMMEQUIP Engineering Model : CEMH-LAM360 Year : 2021 Type : Cutter / Laminator Structure & design: All-stainless steel 304L mechanically welded frame Fitted with 4 pivoting wheels with brakes Dimensions Longueur totale : 3550 mm Hauteur tapis entrée : 1025 mm (±15 mm réglable) Hauteur tapis sortie : 737 mm Largeur bandes : 360 mm Conveyor: Inlet conveyor - White silicone NEOBELTING belt - Maximum temperature: 90°C continuous - Speed: 17 m/min - Motor: 0.25 kW – three-phase 400V - Product guidance via stainless steel comb Conveyor system: Exit conveyor - White silicone NEOBELTING belt - Speed: 43 m/min - Motor: 0.37 kW – three-phase 400V Ledpfoy Dvpvox Amzshn - Integrated air blow-off ramp Cutting unit - Cutting wheel Ø350 mm - 3 blade holders (45° and 90°) - 3 ground hardened steel blades (Z30C13 – 40/42 HRC) – additional blades can be fitted - Rotational speed: 72 rpm - Motor: 0.37 kW – three-phase 400V - Stainless steel housing with adjustable pressure roller - Stainless steel roller guide - Cutting kit available: 90° and 45° Product orientation kit: 2 symmetrical sets, each comprising 1 cell, 1 stop flap and 1 pneumatic cylinder Rolling function - Non-motorised hollow stainless steel roller, Ø140 x 350 mm - Gap adjustment: manual - Adjustable anti-clogging scraper Power supply: Three-phase 400V – 50 Hz Danfoss VLT frequency converters Operator display (HMI) Full machine control Buzzer + power-on indicator light Emergency stop buttons (including 1 on the cutting unit side) Electrical documentation available

Condition: good (used), Full Onion Peeling Line, Comprising of- -Onion Peeler, manufactured by M&P Engineering MP 16584, The Large Onion Peeling Machine from M&P Engineering tops, tails and peels onions of 45mm to 115mm diameter using self adjusting floating knife assemblies over a range of up to 25mm on any one setting. It then slits the onion horizontally from top to tail, the depth of slit is determined by onion quality and grade. The machine finally removes the skin using compressed air providing an end product of optimum appearance -Dolav Tipper Lsdszzpu Dspfx Amzshn -Elevated Conveyor -Roller Table -Onion Washer

Condition: good (used), GIC Gainsborough Engineering model - VFB2000. Manufacturer - Gainsborough Engineering Ltd GIC Gainsborough Engineering VFB2000 vertical form-fill-seal (VFFS) bagging machine, designed for automated weighing/bagging and packing of food products and other free-flowing products. Specification: Lsdpfx Aszzzfuemzehn Manufacturer: Gainsborough Engineering Ltd Brand: GIC Model: VFB2000 Type: Vertical Form-Fill-Seal (VFFS) bagging machine Sealing bars: 290 mm horizontal × 320 mm vertical Film reel width: 620 mm Current film width: 280 mm Forming tube: 80 mm diameter Suitable for integration with weighing/feed systems Stainless steel/food-processing construction Designed for continuous automatic bag forming, filling and sealing

Condition: new, functionality: fully functional, Year of construction: 2025, A double teeth roller crusher is a type of roller crusher commonly used in industries that involve the crushing of various materials, such as mining, metallurgy, building materials, and chemical processing. This crusher is characterized by its two pairs of closely spaced, parallel, and oppositely rotating rolls with "teeth" or "knurling" on their surfaces. The teeth are designed to grab and crush the material, providing efficient and uniform size reduction. Ledpfx Aeq Nga Uemzshn Here are key features and aspects of double teeth roller crusher equipment: 1. Double Roller Design: - The crusher features two parallel, counter-rotating rollers, each with a set of teeth or knurling on its surface. The dual roller design facilitates a consistent and efficient crushing process. 2. Teeth Configuration: - The teeth on the rollers are designed to grip and crush the material. The arrangement and shape of the teeth may vary based on the specific application and the characteristics of the material being processed. 3. Adjustable Gap Settings: - The gap between the rollers can usually be adjusted to control the size of the crushed particles. This feature allows for customization of the final product size. 4. Material Feed and Discharge: - Material is typically fed into the top of the crusher and is crushed between the rotating rollers. The crushed material is discharged at the bottom of the machine. 5. High Efficiency: - Double teeth roller crushers are known for their high efficiency in crushing various materials. The dual roller design provides a more consistent and controlled process compared to single roller crushers. 6. Versatility: - These crushers are versatile and can be used for various materials, including coal, limestone, slag, clay, and other similar materials. 7. Application in Mining and Processing: - Double teeth roller crushers are commonly used in the mining industry for the crushing of minerals and ores. They are also utilized in other industries for size reduction and processing of materials. 8. Dust and Noise Control: - Some double teeth roller crushers are equipped with features to control dust emissions and reduce noise during operation, improving the working environment. 9. High Torque and Power: - A powerful motor and a robust drive system are essential components to drive the rotation of the rollers, providing the necessary torque and power for efficient crushing. 10. Maintenance and Safety: - Regular maintenance is essential for optimal performance. Safety features, such as emergency stops and safety guards, are often incorporated to ensure safe operation. 11. Application in Size Reduction: - Double teeth roller crushers are effective in size reduction and are suitable for applications where precise control over the final product size is crucial. It's important to note that the specific design, features, and applications of double teeth roller crushers can vary among different models and manufacturers. When selecting or using this type of equipment, it's advisable to refer to the manufacturer's guidelines and specifications for proper operation and maintenance.

Year of construction: 2016, condition: used, Manufacturer : IMMEQUIP Engineering Model : CEMH 360 Year: 2016 Width: 36 cm Type : Cutter / Laminator Structure & design: All-stainless steel 304L mechanically welded frame Fitted with 4 pivoting wheels with brakes Conveyor: Entry conveyor belt – Motor: 0.25 kW – three-phase 400V – Product guidance via stainless steel comb Conveyor: Outfeed belt – Motor: 0.37 kW – three-phase 400V – Integrated air blow-off ramp Cutting unit – Cutting wheel Ø350 mm – 3 blade holders (45° and 90°) – 3 ground hardened steel blades (Z30C13 – 40/42 HRC) – Option to add more – Rotation speed: 72 rpm – Motor: 0.37 kW – three-phase 400V Lsdpfxoy Hdqaj Amzjhn – Guide with stainless steel bearings – Cutting kit available: 90° and 45° Product orientation kit: 1 symmetrical set, each comprising 1 cell, 1 stop flap and 1 pneumatic cylinder Rolling function – Non-motorised stainless steel roller, Ø140 x 350 mm – Gap adjustment: manual – Adjustable anti-clogging scraper Power supply: Three-phase 400V – 50 Hz Danfoss VLT frequency converters Operator display (HMI) Full machine control Buzzer + power-on indicator light Emergency stop buttons (including 1 on the cutting unit side) Electrical documentation available

Year of construction: 2024, condition: used, Manufacturer : IMMEQUIP Engineering Model : CEMH-LAM360 Year : 2024 Type : Cutter / Laminator Structure & design: All-stainless steel 304L mechanically welded frame Fitted with 4 swivel wheels with brakes Fully enclosed machine (compliant with 2006/42/EC) Access secured by coded magnetic sensors Dimensions Longueur totale : 3550 mm Hauteur tapis entrée : 1025 mm (±15 mm réglable) Hauteur tapis sortie : 737 mm Largeur bandes : 360 mm Convoyage : Tapis d’entrée - Bande NEOBELTING silicone blanc - Température max : 90°C en continu - Vitesse : 17 m/min - Motorisation : 0,37 kW – triphasé 400V Ledpfx Asy D Ugysmzjhn - Option fournie avec la machine : guidage produits par peigne inox + rouleaux presseurs (voir photo) Conveyor system: Exit conveyor - White silicone NEOBELTING belt - Speed: 43 m/min - Motor: 0.37 kW – three-phase 400V - Integrated air blow-off ramp Cutting unit - Cutting wheel Ø350 mm - 3 blade holders (45° and 90°) - Hardened and ground steel blades (Z30C13 – 40/42 HRC) - Rotation speed: 72 rpm - Motor: 0.37 kW – three-phase 400V - Stainless steel housing with adjustable pressure roller - Stainless steel roller guide - Cutting kit options: 90° and 45° Product orientation kit: 2 symmetrical sets, each comprising 1 cell, 1 stop flap and 1 pneumatic cylinder Laminating / rolling function - Hollow stainless steel roller, Ø140 x 350 mm - Motor: 0.12 kW - Speed: 29 m/min - Precise gap adjustment (1 to 30 mm) - Adjustable anti-clogging scraper Conveyor system: Intermediate conveyor - HABASIT belt, type WVT-140 - Speed: 29 m/min - Motor: 0.18 kW - Stainless steel drum, Ø44 mm - Tension and position adjustment Power supply: Three-phase 400V – 50 Hz SIEMENS G120C frequency converters (x5) SIEMENS 7-inch operator display (HMI) Full machine control Buzzer + power-on indicator light Emergency stop buttons (including 1 on the cutting unit side) Technical documentation available

Condition: used, Year of construction: 2015, input voltage: 230 V, Equipment: CE marking, installation consisting of controlled compressors to regulate the pressure and expansion tanks with bellows C10.1-6 Connect 0.6kW 0/5bar C15.1-10 Connect 1.2 kW 0/10bar Lhjdpezcdyfjfx Amzjn DU 500.10 - 500L 0/10bar CG 1000.10 - 1000L 0/10bar CG 2000.6 - 2000L 6/8.6bar CG 2000.6 E - 2000L 6/8.6bar

Condition: good (used), Wire feed rollers for MIG / MAG hose package, feed motor for inert gas welding device, inert gas device -with: Euro plug-in coupling -Number: 4x wire feed rollers available Lodpfx Amocgan Iezehn -Price: per piece -for a surcharge: gear motor, electric motor, direct current motor are also available -Dimensions: 285/90/H180 mm -Weight: 2.5 kg

Condition: excellent (used), 1 roller table 3.0 m long x 0.77 m wide with 7 support rollers, with pneumatic lifting/adjustment chain with worm gear and bellows cylinder, with a timber transfer roller carriage with rubber turntable for 1-man timber feed, with 2 lift-up stop rollers for planks from the band saw that have already been trimmed on one side. 1 roller table 3.5 m long x 0.77 m wide with 8 support rollers, with or without transfer roller carriage. Original PAUL roller tables in various widths and lengths, available in standard or heavy-duty versions for use in front of cross-cut, trimming and re-cutting circular saws; short work tables allow, for example, the transfer of material from the cross conveyor, passage through the table assembly or the loading of heavy beams by forklift; long work tables are also available in various dimensions Lhodpfx Amst E Nw Tjzon

Condition: good (used), Year of construction: 2020, functionality: fully functional, total length: 9,000 mm, Adhesive application cell with ABB robot IRB 4600-60/2.05. Included in the adhesive application cell: Robot (weight 425 kg, payload 60 kg, year of manufacture 2020) Lhedpfx Aezz Agmomzon 7th axis + steel structure (unlike in the images, the axis and steel structure have been extended to approximately 9 m) Adhesive application units Protective fences, etc. Not included: Roller shutter doors Fixturing device (available separately) Detailed drawings available upon request.

Condition: like new (used), Year of construction: 2020, functionality: fully functional, tank capacity: 5,000 l, usable tank capacity: 5,000 l, total height: 3,225 mm, outer diameter: 1,756 mm, overall weight: 1,640 kg, wall material: stainless steel, wall thickness: 8 mm, wall structure: single-walled, manhole diameter: 610 mm, manhole location: top, operating temperature: 100 °C, negative pressure: 100,000 Pa, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, Equipment: CE marking, sanitary facilities, Brand new, never commissioned. Professionally decommissioned from an INEOS manufacturing facility prior to first use. Manufactured by Able Engineering, this high-specification sanitary 316L stainless steel agitated pressure vessel is suitable for pharmaceutical, cosmetics, personal care, food, beverage and fine chemical applications. Designed for vacuum and low-pressure service and suitable for installation within ATEX-rated environments. Constructed entirely in 316L stainless steel throughout with 8mm shell and dish walls, dished top and bottom heads, heavy duty tubular stainless steel leg supports with bolt-down base plates and load cell arrangement, hygienic internal finish < 0.8 Ra, and full hygienic ferrule fittings throughout conforming to ASME BPE / BS3062. Suitable for CIP. Material: 316L Stainless Steel throughout. Working Volume: 5,000 Litres. Shell ID: 1,740mm. Overall Height: 3,225mm. Shell & Dish Wall Thickness: 8mm. Design Pressure: -1.0 to +0.45 Bar.G. Design Temperature: -10°C to +100°C. Empty Weight: 1,640kg. Design Code: PD5500:2018, Cat.3. PED 2014/68/EU certified. Manufacturer: Able Engineering. Serial Numbers: PXL19635-1, PXL19635-2, PXL19635-3. Factory Tested: September 2020. Lhedpfx Ajzhnlzemzjn Fitted with SEW-Eurodrive geared agitator with double mechanical seal, seal pressure pot, and reinforced agitator mounting. Nozzles and fittings include 610mm hinged manway, CIP inlet with dip pipe and TOD clip-on spray fitting, pressure relief valve connection, nitrogen blanketing connection with pressure indicator, Endress & Hauser hygienic thermowell, dual flush polished level switches, load cell arrangement on support legs, lifting lugs, and earthing boss. Three units currently available, all brand new and never commissioned, sourced directly from the same INEOS facility. Tank saddles available on request for either single use or purchase. Please view our other listings for additional sizes and configurations — all stock is brand new, ex-INEOS, and available for immediate inspection and purchase. Original engineering drawings and full nameplate documentation available on request. Inspection welcome by appointment. Loading and transport can be arranged. Tracht Ltd specialise in hygienic process equipment for the food, beverage, cosmetics, pharmaceutical and chemical industries, with practical experience supporting both batch and continuous manufacturing environments. In addition to process vessels, Tracht Ltd supply and install stainless steel mixing vessels, Silverson high-shear mixers, hygienic lobe pumps, hygienic centrifugal pumps, access gantries, and provide full vessel installation and commissioning services. Whether replacing existing equipment or expanding production capacity, Tracht Ltd can specify, supply and install the right equipment for your application. Please contact us for further information or to discuss delivery and installation options.

Condition: used, power: 20 kW (27.19 HP), For inquiries regarding the attachment, please contact Mr. Herden (at the telephone number provided). Lodoznrwhspfx Amzohn Weber TRC 86 - Compaction Roller - Year of manufacture: 2020 - with radio remote control - 143 operating hours Price: 14,890.00 € net / 17,719.10 € gross Operating weight according to CECE: 1,390 kg Tire width: 854 mm Compaction force: 75 kN Frequency: 32 Hz Amplitude: 1.70 mm Average static line load CECE: 9.80 kg/cm Climbing ability: 50% depending on the ground Working/travel speed: m/min depending on the ground Drive system: hydrostatic, four tires Engine manufacturer/type: Lombardini LDW 1003 Engine type: 3-cylinder diesel, water-cooled Engine power, max.: 19.5 kW / 26.7 hp Engine power at operating speed: 15.6 kW / 21.3 hp at 2600 rpm The machine has a radio remote control. The remote control is charged in the roller. Upon request, we will also provide you with a financing offer. We are the official Westtech sales and service partner. We are the official Gierking GMT sales and service partner. We are the official OilQuick sales and service partner. We are the official Weber MT sales and service partner. We are the official Holp sales and service partner. We are the official DMS sales and service partner. We are the official Seppi M. sales and service partner. We are the official Magni telehandler sales and service partner. We are the official JCB construction machinery sales and service partner. We are the official Mercedes-Benz sales and service partner. We are the official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. Errors and prior sale excepted! = Further information = Year of manufacture: 2020 Operating hours: 143 Unladen weight: 1,390 kg Please contact Marius Herden for further information.

Year of construction: 2007, condition: used, functionality: unexamined, machine/vehicle number: 151 000/69, We are offering this used Weil Engineering longitudinal seam welding machine, model Flexmaster 400 WIG, manufactured in 2007. Ljdpfxszxqb Hs Amzjhn If you have any questions or require further information, please do not hesitate to send us a message or call us.

Year of construction: 2025, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: R500, FiberFlow R500 Cooling Die for Sale Lhodpfoy Um Tgox Amzen The FiberFlow R500 Cooling Die is a specially developed solution for structuring alternative proteins in High Moisture Extrusion (HME). The cooling die is designed to produce fibrous protein structures through controlled cooling and optimized flow guidance, making it particularly suitable for applications such as plant-based meat and seafood alternatives, as well as structured convenience products. The FiberFlow R500 is designed for throughput rates of up to 500 kg/h at operating pressures of up to 70 bar. Its annular (ring-shaped) geometry ensures optimal flow distribution, resulting in uniform fiber formation and consistently high product quality. The system features a modular design and is sold as a complete unit consisting of four segments. Particular emphasis has been placed on hygienic design, enabling the system to meet the stringent requirements of the food industry. The construction allows for easy and efficient cleaning. The FiberFlow R500 is designed for seamless integration into existing extrusion lines and can be incorporated into continuous production processes without difficulty.

Condition: like new (used), Year of construction: 2020, functionality: fully functional, tank capacity: 50,000 l, usable tank capacity: 30,000 l, total height: 4,275 mm, inner diameter: 4,000 mm, outer diameter: 4,020 mm, overall weight: 4,250 kg, wall material: stainless steel, wall thickness: 10 mm, operating temperature: 100 °C, Equipment: CE marking, sanitary facilities, Brand new, never commissioned. Professionally decommissioned from an INEOS manufacturing facility prior to first use. Manufactured by Able Engineering, this high-specification sanitary 316L stainless steel pressure vessel is suitable for pharmaceutical, cosmetics, personal care, food, beverage and fine chemical applications. Designed for vacuum and low-pressure service and suitable for installation within ATEX-rated environments. Constructed entirely in 316L stainless steel throughout with 10mm shell and dish walls, dished top and bottom heads, heavy duty tubular stainless steel leg supports with bolt-down base plates, hygienic internal finish < 0.8 Ra, and full hygienic ferrule fittings throughout conforming to ASME BPE / BS3062. Suitable for CIP, excellent condition. Material: 316L Stainless Steel throughout. Working Volume: 30,000 Litres. Shell ID: 4,000mm. Overall Height: 4,275mm. Shell & Dish Wall Thickness: 10mm. Design Pressure: -1.0 to +0.45 Bar.G. Design Temperature: -10°C to +100°C. Empty Weight: 4,250kg. Design Code: PD5500:2018, Cat.3. PED 2014/68/EU certified. Manufacturer: Able Engineering. Serial Number: PXL19785. Factory Tested: July 2021. Lhjdpjzhn Rqofx Amzon Nozzles and fittings include 610mm hinged manway with grill, triple CIP sprayball arrangement, inlet connections, vent, pressure relief valve connection, Endress & Hauser hygienic thermowell, dual level switches, level measurement connection, lifting lugs, and earthing boss. Two units currently available, both brand new and never commissioned, sourced directly from the same INEOS facility. Tank saddles available on request for either single use or purchase. Please view our other listings for additional sizes and configurations — all stock is brand new, ex-INEOS, and available for immediate inspection and purchase. Original engineering drawings and full nameplate documentation available on request. Inspection welcome by appointment. Loading and transport can be arranged. Tracht Ltd specialise in hygienic process equipment for the food, beverage, cosmetics, pharmaceutical and chemical industries, with practical experience supporting both batch and continuous manufacturing environments. In addition to process vessels, Tracht Ltd supply and install stainless steel mixing vessels, Silverson high-shear mixers, hygienic lobe pumps, hygienic centrifugal pumps, access gantries, and provide full vessel installation and commissioning services. Whether replacing existing equipment or expanding production capacity, Tracht Ltd can specify, supply and install the right equipment for your application. Please contact us for further information or to discuss delivery and installation options.

Condition: like new (used), Year of construction: 2020, functionality: fully functional, tank capacity: 35,000 l, usable tank capacity: 35,000 l, total length: 4,865 mm, inner diameter: 3,000 mm, outer diameter: 3,016 mm, overall weight: 4,670 kg, wall material: stainless steel, wall thickness: 8 mm, manhole location: top, Equipment: CE marking, sanitary facilities, Brand new, never commissioned. Professionally decommissioned from an INEOS manufacturing facility prior to first use. Manufactured by Able Engineering, this large-capacity 316L stainless steel horizontal storage vessel is suitable for bulk hygienic chemical and process liquid storage. Designed for vacuum and low-pressure service. Constructed entirely in 316L stainless steel throughout with 8mm shell and 6mm dish walls, heavy duty stainless steel cradle supports, and ANSI/tri-clamp process connections throughout. Suitable for bulk hygienic storage, excellent condition. Material: 316L Stainless Steel throughout. Working Volume: 35,000 Litres. Shell ID: 3,000mm. Overall Length: 4,865mm. Shell Wall Thickness: 8mm. Design Pressure: -1.0 to +0.45 Bar.G. Design Temperature: -10°C to +80°C. Empty Weight: 4,250–4,670kg depending on configuration. Design Code: PD5500:2018, Cat.3. PED 2014/68/EU certified. Manufacturer: Able Engineering. Factory Tested: 2021. Three units currently available: two insulated and one non-insulated. All vessels are brand new and never commissioned, sourced directly from the same INEOS facility. Tank saddles available on request for either single use or purchase. Please view our other listings for additional sizes and configurations — all stock is brand new, ex-INEOS, and available for immediate inspection and purchase. Original engineering drawings and full nameplate documentation available on request. Inspection welcome by appointment. Loading and transport can be arranged. Lhedszht Rijpfx Amzon Tracht Ltd specialise in hygienic process equipment for the food, beverage, cosmetics, pharmaceutical and chemical industries, with practical experience supporting both batch and continuous manufacturing environments. In addition to process vessels, Tracht Ltd supply and install stainless steel mixing vessels, Silverson high-shear mixers, hygienic lobe pumps, hygienic centrifugal pumps, access gantries, and provide full vessel installation and commissioning services. Whether replacing existing equipment or expanding production capacity, Tracht Ltd can specify, supply and install the right equipment for your application. Please contact us for further information or to discuss delivery and installation options.

Condition: used, Year of construction: 2009, operating hours: 6,787 h, Equipment: all wheel drive, Crushing plant with transport chassis approved for road traffic ----Feed hopper & pre-screening: Hydraulically folding hopper: A 6.5 m³ feed hopper with lockable rear and side walls. The hopper walls can be quickly lowered for transport. * Vibratory feeder (vibrating trough): A robust heavy-duty trough ensures uniform material feed into the crusher. * Grizzly pre-screen: An integrated screen separates fine particles and sand before the crushing chamber, minimizing wear on the crushing jaws and increasing throughput. ----Crushing unit: High-performance jaw crusher: A generous inlet opening of 1,200 x 750 mm. * Hydraulic drive: The crusher is hydraulically driven, allowing for trouble-free starting under load and a reverse crushing function to clear blockages in a material-friendly manner. * Wedge gap adjustment: The stepless hydraulic adjustment of the CSS (closed-side setting) allows for quick adaptation to the desired final grain size. ----Conveyor systems & material separation: Main discharge belt: An extra-long, 1,000 mm wide conveyor belt with a high discharge height. It can be hydraulically lowered for maintenance or transport. * Side discharge belt (bypass): A folding conveyor belt transports the pre-screened fine material (e.g. soil/sand) to the side. * Overband magnet: A powerful permanent magnet above the main belt automatically removes reinforcing steel, bolts and metals from the crushed construction debris. Lhedpj Aa Hr Ujfx Amzsn ----Drive & control: Diesel engine: A Caterpillar C-9 diesel engine with 261 kW (355 hp) provides the hydraulic main drive. * Central control panel: Monitors all important machine parameters (oil pressure, engine temperature, belt speeds) and enables control of the core functions. * Remote control: Allows the excavator or wheel loader operator to control the plant directly from the cab (e.g. start/stop the vibratory feeder). ----Maintenance & mobility: SKF central lubrication system: Automatically lubricates the main bearings of the crusher during operation, drastically reducing manual maintenance effort. * Track chassis: A stable chain chassis ensures excellent off-road capability directly at the job site. * Maintenance platforms: All-round walkways with handrails guarantee safe access to the engine and crusher. ----* Crushing chamber (inlet): 1,200 x 750 mm * Engine: Mostly Caterpillar diesel engine (CAT C-9) ----Transport dimensions: * Length: approx. 14.6 m * Width: approx. 2.8 m * Height: approx. 3.3 m ----Equipment: * Vibratory feeder with grizzly screen * Overband magnet for the separation of reinforcing steel (construction debris) * generous maintenance platforms and folding hopper corners. * 3-axle transport chassis -----Vehicle number 12571 ----Errors and prior sale excepted

Year of construction: 2024, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: F50, For sale is a FiberFlow F50 cooling die (year of manufacture 2024) from DIL Engineering GmbH, a specially developed solution for structuring alternative proteins in high-moisture extrusion (HME). The FiberFlow F50 is designed specifically for research and development (R&D) applications, product development, and pilot trials. With a throughput of up to 50 kg/h, it is ideal for developing and optimizing formulations and processes in the field of alternative proteins, for example, for plant-based or hybrid meat and fish alternatives. By precisely cooling the extrudate, fibrous and meat-like product structures can be created. The system has a modular design and can be configured with one or two segments, depending on the requirements. In addition, one or two separate cooling circuits are available, which ensures precise temperature control and, consequently, consistently high product quality. The integration of inline measuring systems is possible and allows for continuous process monitoring and optimization. Particular emphasis was placed on hygienic design, ensuring that the system meets the high requirements of the food industry. Due to the well-thought-out design, cleaning is simple and fast, which is a major advantage, especially in development operations. Lsdpfozr Hq Rox Amzehn The FiberFlow F50 can be combined with a wide range of different extruder types and manufacturers. If required, a customer-specific adapter can be manufactured for the mechanical connection to the respective extruder (offered individually depending on the existing extruder). We would be happy to check the technical compatibility with your existing extrusion system in advance.