Used Maico Edr 71-0080.0665 for sale (2,992)

Condition: used, Gear motor, electric motor -Speed: 74 rpm -Power: 0.37 kW -Construction: B4 angle -Diameter hollow shaft: Ø 24 mm -Protection class: IP 54 -Dimensions: 360/160/H250 mm Ppsdpfxjcwl Ays Akqjt -Weight: 11.6 kg

Condition: used, Gear motor, electric motor, electric gear motor -Manufacturer: VEM, geared motor with brake -Type: ZG2 BMRE 71K 4 -Speed: 40 rpm -Power: 0.55 kW -Construction: B3 -Shaft: Ø 32 x 80 mm -Protection class: IP 44 Psdpfx Akeh Elz Esqopt -Brake: 4.5 Nm -Dimension: 530/200/H235 mm -Weight: 27 kg

Condition: used, Electric motor, three-phase motor -Power: 0.37 kW -Speed: 1350 rpm Ppedjdkbfxjpfx Akqst -Shaft diameter: 12 mm -Construction: B5 -Protection class: IP 55 -Dimensions: 260/196/H145 mm -Weight: 7 kg

Condition: used, Direct current, gear motor -Power: 6.8 kW -DC motor: Manufacturer Baumuller type DSG 71-M -Gearbox: manufacturer Nord type 32-2AZ-IEC 90 -Translation: 1: 25.88 Ppjdpfx Aked Evuisqot -Hollow shaft diameter: 40 mm -Speed: 4000 rpm/155 rpm -Tachometer: Manufacturer Stegmann type DG 60 XSR -Weight: 85 kg

Condition: used, Bending tool, die, lower knife, lower tool, prism tool -Tool for: press brake -Prisms: R14.5 mm -Square: 101 x 71 mm -Total length: 552 mm Pjdpfx Aksc Spm Ujqspt -Weight: 26 kg

Condition: used, Gear motor, electric motor -Speed: 71 rpm -Power: 1.1 kW Pjdpfsc Uz E Ujx Akqjpt -Construction: B3 -Diameter shaft: Ø 25 mm -IP protection -Number: 1x motors available -Price: per piece -Dimensions: 470/200/H230 mm -Weight: 29 kg

Condition: used, Gear motor, electric motor, three-phase motor, electric gear motor Ppjdpod Rhdyefx Akqet -Speed adjustable: 64 - 640 rpm -Voltage: 220/380 V -Power: 0.25 kW -Construction: B3/B5 -Shaft: Ø 14/27 mm -Dimensions: 475/220/H160 mm -Weight: 18 kg

Condition: used, Gear motor, electric motor, three-phase motor, electric gear motor Ppsdpfx Aob Uhmiekqst -Speed: 33 rpm -Power: 0.37 kW -Construction: B5 -Diameter shaft: Ø 20 mm -Protection class: IP 55 -Price: per piece -Number: 2x available -Weight: 13 kg

Condition: used, Electric motor, three-phase motor -Sale: Handover in the current condition as seen -Case: slight damage, see photos Podpfjgyb Ersx Akqept -Manufacturer: Dietz, electric motor type DR 71 b / 2p -Power: 0.55 kW -Speed: 2800 rpm -Shaft: Ø 14 x 30 mm -Construction: B3 -Protection class: IP 44 -Dimensions: 240/180 / H140 mm -Weight: 7,8 kg

Condition: used, Gear motor, electric motor, three-phase motor, electric gear motor Ppsdpecbki Ejfx Akqst -Speed: 20/40 rpm -Power: 0.15/0.28 kW -Construction: B3 -Diameter shaft: 32 mm -Protection class: IP 54 -Dimensions: 520/210/H240 mm -Weight: 27 kg

Condition: used, Gear motor, electric motor, electric gear motor -Motor: FIMEA type LR 71 b4 -Gearbox: 21 rpm, with oil level indicator -Power: 0.37 kW -Voltage: 220/380 volts -Hollow shaft: Ø 24 x 100 mm -Protection class: IP54 -Brake: 380 v -Dimensions: 470/160 / H195 mm -Weight: 19 kg Ppodehf Nipepfx Akqjt

Condition: used, Electric motor, three-phase motor Ppedegyb Enepfx Akqjt -Manufacturer: Dietz, electric motor type DR 71 b / 2p -Power: 0.55 kW -Speed: 2800 rpm -Shaft: Ø 14 x 30 mm -Construction: B3 -Protection class: IP 44 -Dimensions: 240/180 / H140 mm -Weight: 8 kg

Condition: used, Servo motor, electric motor, DC motor, stepper motor, stepper motor, stepping motor Ppedpfx Aodqckyskqjt -Speed: 6000 rpm -Power: 1 kW -Construction: B5 -Diameter shaft: Ø 24 mm -Number: 1 piece of motors available -Price: per piece -Dimensions: 500/165/H210 mm -Weight: 18 kg

Condition: used, Gear motor, electric motor, electric gear motor -Speed: 26/52 rpm Podod N E Ntepfx Akqopt -Power: 0.21/0.28 kW -Diameter shaft: Ø 25 mm -Construction: B3 -Protection class: IP 54 -Dimensions: 452/114/H215 mm -Weight: 16 kg

Condition: good (used), Geared motor, electric motor, electric geared motor Ppsdpfx Ash Ezd Nekqjt -Manufacturer: VEM, geared motor with brake -Type: ZG2 BPRE 71 K 4 -Speed: 40 rpm -Power: 0.55 kW -Design: B3 -Shaft: Ø 32 x 80 mm -Protection class: IP 44 -Brake: 4.4 Nm -Dimensions: 520/203/H235 mm -Weight: 26 kg

Condition: used, functionality: not functional, Year of construction: 1971, The abbreviation LARC stands for Lighter Amphibious Resupply Cargo. This refers to the tailgate of the vehicles, which enabled the military to transport a truck or other military equipment. The XV in LARC denotes the maximum payload: 15 tons. The vehicles are made of aluminum and have the following (precise) dimensions: 13.71 m in length, 4.41 m in width, and 4.70 m in height. (American measurements: 45 ft x 15 ft x 14 ft). The original LARC vehicles were equipped with two Cummins 8-cylinder diesel engines, each delivering 300 HP. On land, the vehicles could reach a maximum speed of 48 km/h and, on water, 9.5 knots, which is approximately 18 km/h. The unladen weight of the vehicle is 22 tons. The maximum permissible weight was 35.5 tons. The previous owner intended to convert the boats to fully electric drive in order to subsequently organize tours on the Wadden Sea. Around €200,000 was invested, but the project was not completed. Ppedpfsxcgy Hex Akqet The diesel engines have been removed and are no longer available. Battery packs are present and partially installed. The exact remaining work required is not known.

Condition: good (used), Three-phase synchronous motor, geared motor, electric motor -Three-phase synchronous motor: Baumüller type DSOG 71-S -Transmission: SEW-Eurodrive type KA46 LP90 -Speed: 3000 rpm -Power: 6.8 kW -Brake -External fan -Design: Hollow shaft Podpsb A Iyvsfx Akqspt -Shaft diameter: Ø 35 mm -Brake -Protection class: IP 54 -Weight: 50 kg -Number: 4x motors available Price: per piece

Condition: good (used), Digging bucket, excavator bucket, demolition bucket, trenching bucket, excavator bucket -Design: stable -Width: 710 mm -Height: 1000 mm -Depth: 1500 mm Psdsb A I N Sepfx Akqept -Intermediate mounting dimension: 350 mm -Hole diameter: Ø 80 mm -Laceration teeth -extended cutting edge -The design of the spoon attachment can be changed by us for an additional charge. -Empty weight: 700 kg

Condition: good (used), Year of construction: 1974, Oscilloscope, constant, oscilloscope -Dimensions: 150/350/H215 mm -Quantity: 3 pieces available Psdpfx Akeb A Ik Njqopt Price: per piece -Weight: 10 kg

Condition: good (used), geared motor, electric motor Ppjdpfjb A Nd Hjx Akqet -Speed: 23.5 rpm -Power: 0.25 kW -Design: B14 -Shaft diameter: Ø 20 mm -Brake: 24 V -Protection class: IP 65 -Weight: 16 kg

Condition: good (used), geared motor, electric motor -Speed: 76 rpm -Power: 0.37 kW -Design: B5 -Hollow shaft diameter: Ø 25 mm -Protection class: IP 54 -Weight: 14 kg Ppsdob A R Dfspfx Akqjt

Condition: good (used), electric motor, three-phase motor Pjdpob A Hcbjfx Akqspt -Spare part: of a CNC lathe -Power: 11/15 kW -Speed: 1460/2900 rpm -with electric clutch: 24 V and V-belt pulley -Design: B5 -Protection class: IP 44 -Dimensions: 820/440/H320 mm -Weight: 180 kg

Condition: good (used), Electric motor, three-phase motor -Electric motor: Type SKF 71-4B -Power: 0.37 kW -Speed: 1400 rpm -Shaft: Ø 14 x 30 mm Ppedpfx Akowt Nyyeqet -Design: B14 -Dimensions: 235/135/H180 mm -Weight: 6.2 kg

Condition: good (used), nominal power at 50% duty cycle: 8 kVA, - Capacity 8 kVA - Timer - 380V Ppedpfx Aovbr Dlskqot

Condition: ready for operation (used), Nord Getriebebau SK 1S40A-71 L/4 gear motor, serial number: 952356400, used, in good preserved condition, 100% functional, delivery as shown in photos. Pedjw A Ui Eepfx Akqept