Used Makino Snc 64-A15 for sale (2,744)

Condition: new, Year of construction: 2024, New Grundfos Pump - Vertical, multistage centrifugal pump with integrated frequency converter. inlet and outlet ports on same the level (inline). The pump head and base are in cast iron – all other wetted parts are in stainless steel. A cartridge shaft seal ensures high reliability, safe handling, and easy access and service. Power transmission is via a rigid split coupling. Pipe connection is via DIN flanges. The pump is fitted with a 3-phase, fan-cooled asynchronous motor. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. An operating panel on the motor terminal box enables setting of required setpoint as well as setting of pump to "Min." or "Max." operation or to "Stop". The operating panel has indicator lights for "Operation" and "Fault". Communication with the pump is possible by means of Grundfos GO Remote (accessory). The remote control enables further settings as well as reading out of a number of parameters such as "Actual value", "Speed", "Power input" and total "Power consumption". The terminal box holds terminals for these connections: • pump start/stop input (potential-free contact) • remote setpoint setting via analog signal, 0-10 V, 0(4)-20 mA • 10 V voltage supply for setpoint potentiometer, Imax = 5 mA • three analog sensor inputs, 0-10 V, 0(4)-20 mA • 24 V voltage supply for sensor, Imax = 40 mA • one analog output • three digital inputs • two Pt100 inputs Cgjdpfx Ajyug R Rsf Hsu • two potential-free fault signal relays with changeover contact, reporting "Fault", "Operation" or "Ready" • RS-485 GENIbus connection • interface for Grundfos CIM fieldbus module

Condition: new, Year of construction: 2024, NEW Grundfos - The pump is fitted with a 3-phase, fan-cooled, permanent-magnet, synchronous motor. The motor efficiency is classified as IE5 in accordance with IEC 60034-30-2. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. An operating panel on the motor terminal box enables setting of required setpoint as well as setting of pump to "Min." or "Max." operation or to "Stop". The Grundfos Eye indicator on the operating panel provides visual indication of pump status: "Power on": Motor is running (rotating green indicator lights) or not running (permanently green indicator lights) "Warning": Motor is still running (rotating yellow indicator lights) or has stopped (permanently yellow indicator lights) "Alarm": Motor has stopped (flashing red indicator lights). Communication with the pump is possible by means of Grundfos GO Remote (accessory). The remote control enables further settings as well as reading out of a number of parameters such as "Actual value", "Speed", "Power input" and total "Power consumption". The terminal box has a number of inputs and outputs enabling the motor to be used in advanced applications where many inputs and outputs are required: • two dedicated digital inputs • three analog inputs, 0(4)-20 mA, 0-5 V, 0-10 V, 0.5 – 3.5 V • 5 V voltage supply to potentiometer and sensor • one analog output, 0-10 V, 0(4)-20 mA Cgedpeyug Hxsfx Af Hsu • two configurable digital inputs or open-collector outputs • two Pt100/Pt1000 inputs • LiqTec, dry-running protection sensor input • Grundfos Digital Sensor input and output • 24 V voltage supply for sensors • two signal-relay outputs (potential-free contacts) • GENIbus connection • interface for Grundfos CIM fieldbus module.

Condition: new, functionality: fully functional, Year of construction: 2026, machine/vehicle number: 2026, total length: 1,000 mm, total width: 990 mm, input voltage: 400 V, input current: 10 A, input frequency: 50 Hz, type of input current: three-phase, warranty duration: 12 months, DGUV certified until: 05/2027, Equipment: CE marking, NEW +++ Oven +++ NEW Modular deck oven with stone plate for trays 1 x 40/60 per deck Simple programmable control with night start Robust stainless steel construction Temperature up to max. 350°C DGUV V3 tested only by us Connection: 400V, 16A CEE plug Dimensions: 990 x 1000 x 440 mm (W x D x H) per deck Cjdpfx Afjtp D Sno Hogu Brand new unit & SAB tested 24 months warranty + spare parts service Options: Leasing & rental service Extraction hood with condenser Mobile underframe with tray rack Proofing cabinet Peel device Manual loader Maintenance contract Service package Delivery service Commissioning & instruction More ovens in stock!

Year of construction: 1991, condition: ready for operation (used), Travel X/Y/Z: 600mm/400mm/250mm, electrode-table distance range: 420mm-670mm, table dimensions X/Y: 750mm/550mm, max. workpiece weight: 1000kg, workpiece tank internal dimensions X/Y/Z: 900mm/630mm/400mm, workpiece tank volume: 200l, rapid traverse: 1200mm/min, min. input increment: 0.001mm, electrode connection plate: 220mm, max. electrode weight: 75kg. Machine dimensions X/Y/Z: approx. 1850mm/2150mm/2550mm, weight: approx. 4100kg. Including cooling unit, fluid supply unit, automatic fire extinguisher and two power supply units. Documentation available. An on-site inspection is possible. Codpfjyz Anysx Af Hegu

Condition: ready for operation (used), Year of construction: 2000, operating hours: 25,000 h, Machining center Huroc BMC 64 No IKZ chip conveyor coolant trough spindle mount SK 40 DIN 69871 Cgodpfxsp I Hane Af Hsu

Condition: new, functionality: fully functional, overall weight: 285 kg, 2 units in stock. Cedpsyyn T Sjfx Af Hogu Multiple models available, for more information please contact us. Export is possible.

Condition: new, functionality: fully functional, overall weight: 141 kg, Various models available. Contact us for more information. Export is possible. Cgsdpeyyn Shsfx Af Hju

Condition: used, For sale are eight propeller agitators from Erwin Stelzer Warburg. The condition ranges from good to heavily used. RPM: 1450 V: 220/380 Codega Dv Hjpfx Af Hogu kW: 7,5 shaft length: 740mm Blade diameter: 320mm Connection: DN250

Condition: refurbished (used), Year of construction: 2006, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 650 mm, table width: 1,140 mm, table length: 1,640 mm, workpiece length (max.): 1,770 mm, workpiece width (max.): 1,270 mm, workpiece height (max.): 680 mm, feed rate Z-axis: 12 m/min, table load: 7,500 kg, Status: completely overhauled Control: Mitsubishi - 64 bit CNC Generator power: 70 amps - multipulse Travel paths (X, Y, Z): 1000 x 1500 x 650 mm Electrode changer: 30-way pick-up plate changer Work container (W x D x H): 1770 x 1270 x 680 mm Workpiece clamping table (W x D): 1640 x 1140 mm Cgjdpfxoyx Dn Nj Af Hju Load capacity: 7,500 kg Accessories: - CO2 fire extinguishing system - Cartridge filter system - HSJ technology (High Speed Jump)

Condition: excellent (used), Year of construction: 2000, Dust extraction fan, extraction, dust blower, extraction system, dust blower, dust extraction device, separator, welding smoke filter, welding smoke extraction, smoke gas extraction fan, filter system, Cartridge dust extraction system Cgodew Nhbmspfx Af Heu -Filter system -Filter frame: 2135/2135/H2030 mm -Vibration motor: 0.55 kW -Funnel frame: 2100/2130/H2330 mm -Discharge gear motor: 2.2 kW 8.7 rpm -Opening: Ø 250 mm / 250 x 220 mm -Individual components: see photos, without extraction fan -Weight: 320 kg / 890 kg

Condition: used, functionality: unexamined, ALPMA Cheese Portioning Machine – Germany Manufacturer: ALPMA (Alpenland Maschinenbau Hain & Co. KG), Germany Year: 1972 Capacity: Approx. 3,000 portions/hour Power: 0.85 kW Weight: 1,000 kg Industrial cheese and butter portioning machine by ALPMA, designed for dividing blocks into uniform portions prior to packaging. Sturdy mechanical construction with low energy consumption and straightforward operation. Supplied complete with multiple cutting tools and format parts for flexible portion sizes and applications. Suitable for semi-hard and hard cheeses as well as butter blocks. Csdpfx Afsx Ivp Rs Hogu Ideal for small and medium-sized dairies, pilot plants, or export markets. Condition: Used Availability: In stock Delivery: Worldwide shipping available Key Features: - German-manufactured industrial machine - Approx. 3,000 portions per hour - Very low installed power (0.85 kW) - Reliable mechanical design - Supplied with cutting tools and additional format parts - Easy to maintain and transport Manufacturer: Alpma

Condition: new, functionality: fully functional, empty load weight: 115 kg, input voltage: 230 V, warranty duration: 24 months, temperature: 95 °C, KARCHER HG 64 HEATER TECHNICAL DATA: Model: HG 64 Manufacturer: KARCHER Cedoxykwwopfx Af Hegu Catalog number: 1.030-510.0 Type: Hot water generator Country of manufacture: Germany Series: Professional Condition: NEW Power supply type (Ph/V/Hz): 1 / 230 / 50 Connected load (kW): 0.3 Inlet temperature (max): 80°C Minimum inlet volume: 400 l/h Water pumping capacity (l/h): 400-1300 Safety valve operating pressure (max): 220 bar Hot water operating temperature (max): 95°C Burner power: 64 kW Fuel oil consumption (max): 5.9 kg/h Fuel tank: 20 L Fuel type: EL heating oil or diesel Operating weight: 115 kg Dimensions (L x W x H) (mm): 880 x 680 x 860 ADVANTAGES OF THE KARCHER HG 64: Robust and durable device - High-performance burner manufactured using "Made in Germany" technology. Proven Kärcher safety technology guarantees protection for the device and user. Increased cleaning performance thanks to the use of hot water - Shorter cleaning times and lower labor costs. More effective removal of oils, fats, and grease. Effective germ removal and protection of delicate surfaces. Exceptionally easy maintenance - Easy access to all parts requiring service and maintenance. Integrated fuel filter and removable fuel tank for cleaning. KARCHER HG 64 KIT EQUIPMENT: Karcher Classic gun – M22 thread Karcher 1050 mm spray lance 10 m hose – DN8 – 250 bar – 100°C – M22/M22 Connecting hose (high pressure washer – water heater): 3 m – DN8 – 315 bar – 60°C

Year of construction: 2020, condition: used, functionality: fully functional, Wiesheu Bakery oven B8-B5 - 10 Place-5 Place 10 Place 5 Place Mobile base 400 Volt Cjdpfev Rnz Ssx Af Hjgu Year of construction from 2019

Condition: excellent (used), Year of construction: 1988, functionality: fully functional, Technical Data Grinding/Workpiece Diameter: up to approx. 300 mm (partially up to 350 mm) Grinding Length/Stroke: approx. 550 mm (slide travel) Module range (for hobbing cutter resharpening): min. module approx. 0.5 to max. module approx. 25 Number of flutes: typically 1–99 pieces (depending on tool set) Grinding wheel diameter: approx. 150–300 mm Grinding wheel speed: up to about 2,700 rpm Centre distance (workpiece spindle): typical range 400–800 mm Swivel/Pitch range: e.g. grinding wheel head swivel 0–15° Machine weight and space requirement: approx. 4.2–4.9 t weight; space approx. 3 × 2.6 × 2.3 m Csdpfx Afjxtiune Hjgu Electrical data: operating voltage e.g. 380 V three-phase, control 24 V, auxiliary voltage 220 V

Condition: excellent (used), Year of construction: 1988, TECHNICAL DATA. Max. clamping length: 90 mm Tool clamping height with tapered shank: 50 mm Tool clamping height with straight shank: 45 mm Max. helix angle: 45° Number of clamping positions: 1 to 99 Max. slide travel: 550 mm Codpfx Afswwkacs Hjgu Max. grinding wheel diameter: 350 mm Min. grinding wheel diameter: 150 mm Grinding wheel speed (variable): up to 2700 rpm Swivel range of grinding spindle axis: 0° to 15° Grinding slide feed rate (variable): 0.05 to 16 mm/min (with 3rd and 4th axis: 0.05 to 8 mm/min) Workpiece spindle taper: ISO Taper No. 40 Grinding Wheel Data CBN and diamond cup grinding wheel: Ø200 mm → Min. DFF: 66 (3rd axis), 76 (4th axis) Ø250 mm → Min. DFF: 16 (3rd axis), 26 (4th axis) CBN-ES cone grinding wheel: Ø200 mm → Min. DFF: 50 (3rd axis), 60 (4th axis) Ø250 mm → Min. DFF: 0 (3rd axis), 10 (4th axis)

Condition: good (used), Year of construction: 2007, functionality: fully functional, filter area: 64 m², suction capacity: 4,500 m³/h, negative pressure: 3,200 Pa, Dust extraction, welding fume extraction, cartridge filter self-cleaning, pneumatic, vacuum for plasma, laser , sandblasting, soda blasting, shot blasting and all kinds of dry dust. Brand : ESTA Model : DUSTEX F-64 Cedpovkd Rpsfx Af Hegu The filter is cleaned by compressed air pulses during operation, which makes the device highly efficient. Fan on the clean side which reduces the risk of explosion to a minimum. Parameters : Capacity - 4500 m3/h Vacuum - 3200 Pa Filtration area - 64 m2 Cartridge filter cartridges - 4 pieces. 4 Kw motor. Inlet diameter - 280mm Complete with HEPA filter of filtration class H13 The device from the year 2007

Condition: refurbished (used), Year of construction: 2006, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 650 mm, table width: 1,140 mm, table length: 1,640 mm, workpiece length (max.): 1,770 mm, workpiece width (max.): 1,270 mm, workpiece height (max.): 680 mm, feed rate Z-axis: 12 m/min, table load: 7,500 kg, Status: completely overhauled Control: Mitsubishi - 64 bit CNC Generator power: 70 amps - multipulse Travel paths (X, Y, Z): 1000 x 1500 x 650 mm Electrode changer: 30-way pick-up plate changer Work container (W x D x H): 1770 x 1270 x 680 mm Workpiece clamping table (W x D): 1640 x 1140 mm Load capacity: 7,500 kg Accessories: Codpsyrqn Isfx Af Hegu - CO2 fire extinguishing system - Cartridge filter system - HSJ technology (High Speed Jump)

Condition: ready for operation (used), Year of construction: 2002, controller manufacturer: HEIDENHAIN, number of axes: 3, This 3-axis DECKEL MAHO 64 V linear was manufactured in 2002. It features an SK40 tool holder and a 30-tool automatic tool changer. The machine includes a paper band filter. Note, the probe requires servicing due to a communication error. If you are looking to get high-quality milling capabilities, consider the DECKEL MAHO 64 V linear machine we have for sale. Contact us for more information. • ATC capacity: 30 tools Additional equipment • Paper band filter (coolant filtration) Cgjdpfxjx D E Hhe Af Heu • Probe (needs service; communication error) Technical Specification Taper Size SK 40

Condition: good (used), Year of construction: 2015, operating hours: 430 h, fuel type: electric, Holland-Lift Y 64 EL 14 Scissor Lift / Aerial Work Platform 8.4M Working Height Electric 2015. Inspection valid until 4-2026 Video can be sent via Whatsapp. Continuous stock available, see our website. Prices are ex Nuland. Van de Wert Trading B.V. offers a changing stock of machines, trucks, trailers and attachments. All our deliveries are at trade prices in AS-IS condition without warranties (see our general terms and conditions). For a viewing and/or test drive, you can book a non-binding appointment. Please call in advance as we are not constantly present. Van de Wert Trading B.V. Bedrijfsstraat 3 Cgodpeyi Spzofx Af Hsu 5391 LR Nuland

Condition: good (used), Hurco VMX64 / 40T Serial No. M64406503066FHA Year of manufacture: 2006 Spindle hours: approx. 4,200 h Power-on hours: approx. 5,900 h !!! Control upgraded to WINMAX (software version 2016, 09.01.393.53) !!! DXF option and network connection Travel distances: X: 1625 mm Y: 860 mm Z: 760 mm Clamping surface: 1675 x 890 mm Table load capacity: 2,500 kg Power: 15.0 kW Max. torque: 237 Nm Cedpfxsym R T He Af Hogu Spindle/table distance: 150 - 910 mm Weight: 15,000 kg Dimensions (W x D x H): 6340 x 4400 x 3150 mm Features: - BigPlus spindle with 10,000 rpm - KNOLL band filter system - High-pressure coolant (IKZ) 20 bar - Tool magazine (hydraulic chain magazine), 40 slots - SK40 spindle - Chip conveyor - 6 NC hydraulic vices ATORN (125mm) The machine is in very good condition and ready for immediate use. All backlash has been adjusted, so the geometry is excellent. The control has been upgraded to WINMAX. Price plus loading costs of €1,500 For transport, a truck with 3 m width is required!

Condition: ready for operation (used), Year of construction: 2003, operating hours: 42,368 h, General Data Machine weight 6800 kg Control Unit Codsx D Ntfepfx Af Hogu Brand HEIDENHAIN Model iTNC 530 Main Drive Spindle speed range 12000 Tool taper SK40 Number of axis 3 Movement X-Axis Movement 640 mm Y-Axis Movement 600 mm Z-Axis Movement 500 mm This 3-axis DMG DECKEL MAHO DMC 64 V linear was manufactured in 2003. It features a 640 mm X-axis, 600 mm Y-axis, 500 mm Z-axis, and a table size of 850 x 600 mm. Equipped with a Heidenhain iTNC 530 control unit, SK40 taper, and a tool magazine with 30 tools capacity. Consider the opportunity to buy this DMG DECKEL MAHO DMC 64 V linear vertical machining centre. Contact us for more information. Application Types Milling

Year of construction: 1997, condition: like new (used), Fomaco FGM 16/64 injector. Conveyor dimensions : Length : 130cm. Width : 24,5cm. Cgodpfed Ixcfjx Af Hju Height : 120cm. Opening : Width : 28cm. Height : 14cm.

Year of construction: 2004, condition: good (used), FOMACO injector with tenderizer and FOMACO filter. CONTACT US FOR MORE PICTURES. FOMACO injector - Type - FGM 64/384-384 DC Volt - 3x400V, 50hz. Working hours : 8386. Cedpfxjhgz Ehj Af Hjgu Amp - 30A. Max amp - 63A. Air(bar) - 6bar. FOMACO filter - Type - PFS 5/270 RDC. Volt - 3x400V, 50hz. Amp - 1.6A. Max amp - 16A.

Condition: ready for operation (used), Year of construction: 2007, operating hours: 620 h, Travel path X/Y/Z: 1630mm/860mm/760mm, speed: 8000rpm, torque: 142Nm, power: 15kW, tool positions: 40, max. tool diameter: 75mm/127mm, max. tool length: 300mm, max. tool weight: 10kg, table dimensions X/Y: 1680mm/890mm, max. table load: 2700kg. Machine dimensions X/Y/Z: approx. 6400mm/4400mm/3300mm, weight: approx. 14500kg, control: Hurco Ultimax 4, operating hours: approx. 621h. Documentation available. An on-site inspection is possible. Expected to be available from mid-2026. Cjdow Dfhzjpfx Af Hsgu

Condition: excellent (used), Manometer, test manometer, pressure gauge with Bourdon tube, pressure-temperature measuring technology, Bourdon tube manometer, pressure tester, pressure tester -Manufacturer: TGL, Manometer 0-10 bar, unused, original packaging -Type: 1/BM 20/2 160 0-250 kPa Cgodeyd H H Rspfx Af Hsu -Number: 14x pressure gauges available -Price: per piece -Cardboard dimensions: 200/185/H70 mm -Weight: 0.9 kg/pc.