Used Markem Imaje 9040 Contrast for sale (148)

Condition: reconditioned (used), Year of construction: 1998, operating hours: 2,000 h, functionality: fully functional, machine/vehicle number: 067-1045 from 1998 first owner, color channels: 2 kleuren rechtdoor, paper weight (min.): 30 g/m², paper weight (max.): 350 g/m², paper width (min.): 148 mm, paper width (max.): 520 mm, paper height (min.): 100 mm, paper height (max.): 365 mm, total length: 2,765 mm, total width: 1,523 mm, total height: 1,560 mm, space requirement length: 2,765 mm, space requirement width: 1,523 mm, space requirement height: 1,560 mm, type of input current: three-phase, input current: 20 A, input voltage: 200 V, Equipment: documentation/manual, In contrast to the previous offer, the machine has been thoroughly cleaned and inspected. Several replacements and repairs have been carried out, including new timing chains, a new drive chain for the feeder, replacement of some idler rollers, and all grippers on all drums have been made of stainless steel and are now functioning smoothly, ensuring excellent register. The rollers are rated approximately 7 out of 10; they are slightly glazed and close to their minimum dimensions, but a period of approximately 1500 to 2500 hours should still be manageable without any significant issues, which is what has been promised! 2-color offset press with high-quality construction, featuring hardened and ground gears, cylinders running in class P5 preloaded tapered roller bearings (sets of 2), and lubricated via oil bath and pressure lubrication. B3 format (35x50 cm) in a conventional standard configuration (no autoplate or cocking), but with an alcohol dampening system with large rollers based on the SM52 design, producing excellent print quality. From the original owner who did not maintain the machine properly (cosmetically); however, a comprehensive maintenance history is available, performed by the importer. The latest meter reading in the history is 11.6 million impressions from 2003. Due to illness and outsourcing, the previous owner, a printing broker, has hardly used the machine since then. NEXT STEPS: We will check the machine against the current meter reading and ensure correct and reliable operation. C)2 dry ice cleaning is being considered, as is a complete overhaul of the machine, as the mechanical condition is exceptionally good. However, this would increase the cost, so the machine is currently offered in its current condition, "as is", EXW our warehouse in Son, NL (5,500,- EXW, NOW after refurbishment €7,500,- EXW van Rooij). Any type of inspection is, of course, permitted. We guarantee that the machine is free from cracks, cylinder damage and/or repairs, and that the gears are free from damage. The rubber rollers are glazed and need to be replaced. The Royce ECO circulating pump and cooling system for the dampening unit shows signs of corrosion. Some specifications, for all specifications, open the PDF at the bottom of this page. Maximum printing speed 12,000 sheets per hour Maximum paper size 365 x 520 mm Minimum paper size 100 x 148 mm or 148 x 100 mm Nwjdpfxev Nv Tao Agrol Maximum printing area 350 x 510 mm Rubber blanket size 500 x 520 x 1.9 mm Plate size 400 - 410 x 510 mm Dampening roller in this case for film dampening is 1 (62mm) Number of ink rollers 4 pieces of 46, 48, 52 and 54 mm Feeder stack height maximum 850 mm Delivery stack height max 360 mm Electrical connection 3 phases 200 VAC 50HZ (primary), but there is a transformer for conversion from 3 x 415/400/380/230 VAC to 200VAC Total power consumption 7kW Primary fuse rating at least 20A Dimensions LxWxH = 2765 x 1523 x 1560 mm Net weight 4000 kg

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 2 h, functionality: fully functional, shaft length: 355 mm, input voltage: 230 V, type of input current: AC, laser power: 20 W, type of cooling: water, warranty duration: 12 months, laser wavelength: 355 nm, input frequency: 50 Hz, Equipment: cabin, UV laser engraving machine with 20-watt laser power Laser source with 355nm wavelength / 20 watts Exhibition machine, with approximately 2 hours of operation - No discernible signs of wear - Includes rotary axis - Includes Windows 64-bit PC system - Includes 22" monitor - Everything is fully installed and calibrated - Engraving software in German - 3D software (MM3D) - Very easy to operate - Simply turn on and start - UV laser source with 20 watts for high-contrast and fast marking with extremely high resolution - Engraving on virtually all metals (stainless steel, brass, aluminum, etc.) - Engraving on virtually all plastics (including PVC, silicone, etc.) - Engraving on real glass (including crystal glass) - Cutting of real glass is possible - Heavy-duty industrial quality - Complete system / ready for immediate use - Work area approximately 500 x 600 x 600 mm (L x W x H) - Clamping surface with mounting threads in a 50mm grid - LED work area lighting - 50mm pipe connection for fume extraction - Engraving area approximately 150x150 / 200x200 / 300x300 (switchable) - 3D scanner for marking surfaces of any shape - Includes foot switch to start the engraving process Sales are exclusively to commercial businesses. Delivery / Consultation / Sales only in Germany / Austria / Switzerland Please also note our attractive leasing/hire purchase offers. Machine dimensions approximately: Width: 800mm Height: 1800mm Depth: 1000mm Nsdpoflrnaefx Agrewl Weight: approx. 180kg

Condition: excellent (used), functionality: fully functional, mileage: 478,600 km, power: 537 kW (730.12 HP), first registration: 07/2018, fuel type: diesel, axle configuration: 4x2, fuel: diesel, brakes: retarder, gearing type: automatic, Year of construction: 2018, Equipment: ABS, AdBlue, Bluetooth, EBS, USB port, additional headlights, air conditioning, airbag, central locking, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fog lights, fridge, full service history, lane keeping assist, low noise, navigation system, non-smoking vehicle, onboard computer, parking air conditioner, parking heater, power assisted steering, power mirror, retarder, seat heater, soot filter, spoiler, tachograph, tire pressure monitoring, traction control, SCANIA R730 *V8* / Premium and Luxury Packages! Top Specifications / FULL OPTION! 2 units in stock! Specification details: Engine: 730 HP Euro 6 Transmission: OPTICRUISE (Kickdown Opticruise), Eco-Roll function Opticruise shift program: Economy, Standard, Power Reinforced turbocharger SCANIA RETARDER Differential lock PREMIUM long-haul cab equipment Aerodynamic tractor unit wind deflectors Black LEATHER INTERIOR PREMIUM driver's and co-driver's seats with V8 embossing DRIVER'S SEAT VENTILATION (seat climate) + heating Lower bunk extensible 800-1000mm Wood trim/leather steering wheel with airbag Side airbag driver's side Black leather door panels Luxury dashboard Ambient lighting below dashboard Dashboard (passenger side) with table Wood trim dashboard decor Premium combination instrument Premium infotainment system, 7'' display Infotainment voice control Original Scania STANDALONE AIR CONDITIONING Additional cab heater, water/air 3kW Air conditioning and heating system LED headlights LED fog lamps (3 diodes) LED daytime running / position / marker / contour lights LED tail lights LED work lights on cab rear wall High-beam lamps integrated in front grille Comfort air suspension cab mounting Double-glazed door windows Tinted windscreen Manually height-adjustable roof spoiler (crank) ALCOA DuraBright alloy wheels with MICHELIN tires Special frame and plastic parts paint Front grill V8 paint finish (Ebony/Brilliant Black) Black contrast finish on door/side panel (glass) Aluminum checker plate cover up to fifth wheel Aluminum checker plate toolbox, right side of frame Special frame and plastic parts paint Additional interior features: Leather engine tunnel cover, black Electric sunroof including mosquito net Ambient roof lighting Ambient cab rear wall lighting Mood interior lighting Driver's left internal side sunblind Black leather floor mats Side AIRBAG driver's side Equipment packages: Premium infotainment package with navigation, 7'' display, and driver package Premium driver package with armrest (Opticruise) Black LEATHER seat upholstery package MCC Underline package 2 with side panels Safety package with assistance systems Comfort package CR cab Light package Climate system package: premium A/C + with heater Assistance systems: Scania AEB (emergency braking assist) + Scania LDW (lane departure warning) + Scania ACC (adaptive cruise control) Communication: Nodsq H T Eqopfx Agrswl Premium infotainment system, 7'' display Infotainment voice control European map data Bluetooth for radio Steering wheel infotainment controls Premium speaker system, 4x20W dual coil Radio with DAB (digital audio broadcast) Mobile phone connectivity Tachograph remote download (switch) Scania Communicator C300 etc. ... Front axle tires: 385/65R22.5 ...MICHELIN... Rear axle tires: 315/80R22.5 ...MICHELIN... 1st owner SCANIA service maintained! For further information: Mobile: +43 664 4477030 Would you like to visit us? We offer a free pick-up service from the train station in 4020 Linz. We handle all customs procedures for you. What about your trade-in? ...if we reach an agreement, we are happy to take yours in part exchange. Offer non-binding. Subject to prior sale and errors.

Year of construction: 2022, operating hours: 8 h, condition: ready for operation (used), controller manufacturer: SIEMENS, controller model: SIMATIC HMI, Fully electric CNC tube bending machine manufactured in 2022. This BLM E-TURN 52B features a Siemens Simotion CNC control system and offers advanced bending capabilities, including fixed radius, variable radius, and multi-radius bending. It is designed for low energy consumption and includes programmable booster and tooling stacks for enhanced performance. If you are looking to get high-quality tube bending capabilities, consider the BLM E-TURN 52B machine we have for sale. Contact us for further details. • Number of axes: 14 • Energy consumption: Low Nwsdpfx Aozqtzgsgrjl • Bending direction: Right and left bending in-process (automatic direction change) • Bending capability: Fixed radius, variable radius, and multi-radius • Tool configuration: 3 tooling stacks + 3 additional tooling stacks • Tool stack height: 60 mm (2.4") • Tube capacity: • Carbon steel (FE37): max diameter 50.8 mm (2.0"), max wall thickness 1.5 mm (0.06"), based on RM 1.5D, Vy50% • Stainless steel (AISI 304): max diameter 50.8 mm (2.0"), max wall thickness 2.0 mm (0.08"), based on RM 2D, Vy50% • VGP3D software features: • 3D graphical programming • Part feasibility verification with collision detection • Automatic cycle time calculation • Automatic machine cycle generation • Faster quotation preparation and production planning • Standard equipment: • Electrically driven pressure dies • Left and right counter-die supports • Programmable booster / variable-radius unit (booster force 20,000 N; booster speed 1,000 mm/min) • Mandrel bars: 10 mm (0.39"), 16 mm (0.63"), 24 mm (0.94") • CE compliant Additional equipment • WELDET-07: Programmable weld seam positioning system (optical weld seam detection based on color contrast; compatible with ET30, ET35, ET40, ET52) • MC1052-01: Blind hole detection device

Year of construction: 2023, condition: used, functionality: fully functional, machine/vehicle number: 2331 280, We sell a used Bolte Pro I-2200 stud welding unit with microprocessor control. MFG 2023, serial number: 2331 280 The trolley version of the PRO-I 2200, with two large, extremely robust wheels and a telescopic handle, is ideal for mobile use on construction sites. Technical features and advantages: Excellent welding quality – modern inverter technology ensures very precise control and high reproducibility of the welding process Very high arc stability – also in cases of short welding times and low welding currents Powerful – high welding current of 1050 A for a maximum welding diameter of 13 mm Fast welding sequences through innovative cooling concept Ideal for mobile use – considerably less weight than conventional stud welding units Robust construction for use in harsh environments Low energy consumption due to high efficiency Easy operation via a very robust rotary pressure switch Nedpfoy Tqwyex Agrjwl Microprocessor control All functions and parameters are displayed on a large display (display contrast is adjustable) Welding program library Welding program storage – 59 Welding range: Ø 2-22 mm Welding current: 100-2100 A Welding method: studs with ceramic rings or shielding gas and short-cycle stud welding with or without shielding gas Welded materials: steel, stainless steel, aluminum Voltage: 320-495 V, 32 A, 50/60 Hz Power source: transformer/rectifier Welding time: 1-1500 ms, continuously adjustable Protection class: IP23 Dimensions (W x H x L) (mm): 550x850x650 mm Weight: 81 kg drawn arc stud welding gun GD 22 WMS is designed for welding shear connectors with large diameters (19 and 22 mm). Welding range Ø 3-22 mm Welding material steel, stainless steel Stud length 10-525 mm Welding method (acc. to DIN EN ISO 14555) stud welding with ceramic ferrule, stud welding with shielding gas Lift 0-6 mm, adjustable (raster: 0,3 mm) Welding cable: 2 m, 95 mm², outside Control cable plug: 12-pin Dimensions (WxHxL): 68x180x295 mm Weight (without cable): 2,45 kg The new drawn arc stud welding gun GD 22 is designed for welding shear connectors with large diameters (19 and 22 mm). The ample-dimensioned adjustable lift (adjustment range: 0-6 mm) ensures in combination with the adjustable hydraulic piston damper optimum welding results in this diameter field. Of course, the new guns are suitable for welding through metal deck. The gun also features a piston with linear ball track, an automatic length compensation system for different stud lengths and surface conditions as well as a robust, impact resistant housing for the hard work on the construction site. The high-grade outside welding cable (cable cross section 95 mm²) accommodates the high welding currents that are necessary for large stud diameters. Optionally, the new guns can be equipped with integrated travel measuring system. Using this the lift adjustment couldn`t be easier. Moreover, it enables a quality monitoring by measuring and recording of stud protrusion before the weld as well as stud travel (lift, immersion depth, immersion speed and short-circuit time) during the weld. Price 8.600 Euro + VAT, negotiable, FCA Oradea, Romania Please make an offer. Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: used, Year of construction: 2026, operating hours: 15 h, functionality: fully functional, machine/vehicle number: 204065, total width: 2,900 mm, total height: 3,300 mm, Used machine CNC cutter/plotter Cutting area in X and Y: 2,500 x 2,100 mm. Multifunctional CAM cutting system in CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials. Equipment of the used machine • 1 cutting bridge and 1 multifunctional tool head The machine is sold with one driven circular knife, electric oscillating knife and one Milling Head + exhaust • Multifunctional tool head to hold max. 3 interchangeable tools • powerful vacuum blower for fixing the material • Standard equipped with gray conveyor table (Conveyor). Green-blue exchange conveyor possible (offers high contrast for dark materials) Can be extended with other tools (on request): • EOT electric oscillating blade • POT pneumatic oscillating knife • PRT rotating blade • UCT universal blade • KCT Kiss-Cut tool • CTT creasing tool Nedpfx Agjif Ek Rerjwl • V-Cut angle-cut cutting blade • Punching tool for pinches or holes • Printer mark detection • Camera registration Easy-to-use function • Easy interchangeable cutting tools, "PLUG & CUT • Intuitive user interface • Easy blade change • Vacuum zones can be activated with a click Fast amortization • Low cost with high added value • Best material utilization through nest expert software modules (not included in equipment) • High velocity • Constant precision Data: • Short cutting times due to high positioning speed up to 90 m/min. • Repeatabiliy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both single ply and multi ply or sheet goods and roll goods (can be extended with suitable unwinder) (Product photo as example) The machine is CE certified.

Condition: used, color: blue, Field of application: Mining Productivity: 300 tph Unveiling the extraordinary performance of Polygonmach's Stationary Crushing and Screening Plants, built to redefine the industry standards of material processing. In contrast to mobile units, these stationary plants offer enhanced stability, higher production capacities, and tailor-made configurations that suit your specific needs. Polygonmach's Stationary Crushing and Screening Plants are designed for a wide range of applications such as limestone, dolomite, gravel, and sand. These plants play a crucial role in industries like construction, mining, and aggregate production, ensuring the most effective and efficient crushing and screening processes. Each plant comprises state-of-the-art components, providing you with a reliable solution that consistently delivers high-quality output. They feature robust crushers for primary, secondary, or tertiary crushing, advanced vibrating screens for precise material separation, and an array of conveyors for smooth material transfer. What sets Polygonmach's stationary plants apart is their high capacity and extensive lifespan. Designed to perform in the toughest conditions, these plants exhibit unparalleled durability and resilience. Their stationary nature allows for larger components, contributing to increased production capacity, which is critical for large-scale, high-output projects. Additionally, Polygonmach places a strong emphasis on environmental sustainability. The dust removal systems incorporated in these plants contribute to a safer and cleaner working environment, keeping air pollution to a minimum. Technology: jaw Mobility: stationary Other characteristics: primary, secondary, tertiary, limostone Capacity: Max.: 300 t/h(184 lb/s)Min.: 120 t/h(73 lb/s) Nodpjx D A Ensfx Agrewl

Condition: good (used), Olympus CKX53SF inverted microscope, suitable for cell culture, live cell observation, and general laboratory use. This configuration is equipped with integrated phase contrast (iPC) and comes with multiple objectives and various accessories. Configuration: UPLFLN4xIPC/0.13 objective CACHN10x IPC/0.25 objective Nwodpjzhidfofx Agrel LCACHN20xIPC/0.40 objective LCACHN40xIPC/0.55 objective 10X/22 eyepiece CKX3-SLP pre-centered phase contrast slider Various accessories, including coverslip platforms, sliders, and additional accessories. Features: Inverted microscope, ideal for cell culture applications. iPC phase contrast for fast and high-contrast observation. Professional Olympus platform, compact and well-suited for laboratory environments.

Year of construction: 2020, condition: good (used), Well-maintained Leica DM IL LED Cellfactory inverted microscope, suitable for cell culture, phase contrast, and routine live-cell observation. Nodpfx Agjzhia Hjrswl Configuration: HI PLAN 4x/0.10 PH0 objective HI PLAN I 20x/0.30 PH1 objective HI PLAN I 20x/0.30 PH1 objective HI PLAN I 40x/0.50 PH2 objective S40/0.45 Leica condenser (521251) HC C-mount 0.50x Slider HC Plan 10x/20 eyepiece(s) Flexacam C1 with remote control Various accessories A robust setup for laboratories, biotechnology, research, and cell culture applications.

Condition: new, Year of construction: 2025, functionality: fully functional, shaft length: 10,700 mm, laser power: 30 W, Laser engraving machine with 30-watt laser power - Laser source: 30-watt CO2 metal tube Demonstration machine with minimal operating hours - Includes Windows 10 Pro 64-bit PC system - Includes 22" monitor - Everything is pre-installed and adjusted - Engraving software in German - Very easy to use - Simply switch on and start - CO2 laser source with 30 watts for high-contrast and fast markings with extremely high resolution - Deep engraving possible - Wobble function - For engraving on e.g., wood, plastic, anodized surfaces, etc. - Heavy-duty industrial quality - Complete system / ready for immediate use - Work area approx. 500 x 600 x 600mm (l x w x h) - Clamping surface with mounting threads in a 50mm grid - LED work area lighting - 50mm pipe connection for smoke extraction Nsdpfx Agsirmgmorjwl - Engraving area approx. 180 x 180mm - Expandable up to approx. 300 x 300mm - Includes foot switch to start the engraving process Please also note our attractive leasing/hire-purchase offers. Sales are exclusively to business customers. Delivery / consultation / sales only in Germany / Austria / Switzerland Machine dimensions approx.: Width: 800mm Height: 1800mm Depth: 1000mm Weight: approx. 150kg

Year of construction: 2025, condition: used, functionality: fully functional, laser power: 200 W, machine/vehicle number: ELXX-25100004, For sale is a professional, pulsed laser cleaning machine (pulse laser) of the type GL-PM-200 from the manufacturer EraserLaser GmbH. The unit dates back to the 2025 model year, has very few operating hours, and is in excellent, fully functional condition. In contrast to continuous CW lasers, this pulsed system is ideally suited for extremely precise and material-friendly cleaning. It is the ideal solution for demanding tasks where the base material (e.g., sensitive molds, historical components, weld seam preparation, or precision tools) must not be subjected to any thermal influence or material removal. Rust, paint, oils, and oxide layers are removed precisely and without leaving any residue. Product benefits & highlights: Maximum precision without heat input: Thanks to the fine adjustment of pulse width (20–500 ns) and frequency, the cleaning can be precisely tailored to sensitive surfaces. Compact & flexible: The laser is housed in a robust enclosure and can be ideally used in mobile applications. Extensive parameter control: Parameters such as laser power, scan speed, frequency, and track density (Spiral Series) can be precisely controlled via the intuitive 7-inch touch display. Quick access to memory locations: Up to 5 user-defined work modes can be saved to allow quick switching between different cleaning requirements in everyday work. Easy maintenance & care: Low maintenance thanks to reliable air cooling. Integrated preview laser for precise alignment of the cleaning area on the workpiece. Nedpjziww Ajfx Agrewl Technical data at a glance: Model: GL-P-M-200 Laser type: Pulsed fiber laser (pulse laser), Laser Class 4 Wavelength: 1064 nm Laser power: 200 watts (continuously adjustable from 10% to 100%) Laser frequency: 5 kHz – 4000 kHz Pulse width: 20 ns – 500 ns Cleaning area (length x width): Variable, adjustable up to 100 mm x 20 mm Fiber length (hose assembly): 4 to 10 meters Cooling: Air-cooled Power connection: 220V AC (Schuko plug, fuse rating min. 16A) Condition & scope of delivery: Condition: Very well-maintained, used condition, hardly used, visually and technically flawless. The protective lens and optics are clean and fully functional. Scope of delivery: Laser cleaning system GL-P-M-200 including hose assembly and cleaning gun. Important safety note: Operating a system of Laser Class 4 requires the mandatory use of approved laser safety goggles (DIN EN 207 for the wavelength range of 1064 nm) as well as compliance with applicable occupational safety regulations (including respiratory protection/extraction).

Condition: good (used), Year of construction: 2019, Reflective light barrier, reflective light sensor, reflective sensor, light sensor, fiber optic measuring amplifier, fiber optic sensor, fiber optic cable sensor, contrast sensor, contrast sensor, sensor reflective light sensor, light sensor -Manufacturer: Sick, Array sensor contrast switch -Type: AS30-EBM314I110ZZZ -Voltage: DC 18...30V -Number: 3 sensors available Nwodjx Thd Rspfx Agrel -Price: per piece -Dimensions: 80/50/30 mm / 65/30/60 mm -Weight: 0.2 kg/pc.

Condition: excellent (used), functionality: fully functional, mileage: 553,123 km, power: 536.91 kW (729.99 HP), first registration: 07/2017, fuel type: diesel, axle configuration: 4x2, fuel: diesel, brakes: retarder, gearing type: automatic, emission class: euro6, Year of construction: 2017, Equipment: ABS, AdBlue, Bluetooth, EBS, USB port, additional headlights, air conditioning, airbag, central locking, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fog lights, fridge, full service history, lane keeping assist, low noise, navigation system, onboard computer, parking air conditioner, parking heater, power assisted steering, power mirror, retarder, seat heater, soot filter, spoiler, tachograph, tire pressure monitoring, traction control, SCANIA R730 *V8* / Premium and luxury packages ! TOP equipment ! 2-Pieces in stock / 2-Pieces in stock ! Equipment details: Engine: 730 HP Euro6 Transmission: OPTICRUISE (Kickdown Opticruise) Eco-Roll function Opticruise shift program Economy, Standard, Power Turbocharger reinforced SCANIA RETARDER Differential lock PREMIUM long-distance cab equipment Aerodynamic tractor unit Wind deflector LED EQUIPMENT Black PREMIUM driver's seat + passenger seat with V8 embossing DRIVER'S SEAT VENTILATION (seat climate) + heating Extendable lower bed 800-1000mm Wood/leather steering wheel with airbag Driver's side airbag Black leather door trim Luxury dashboard design Backlighting below the dashboard Dashboard passenger side with table Dashboard woodgrain trim Premium instrument cluster Infotainment system Premium 7'' display Nwedpfoq H Tgtox Agrsl Infotainment voice control STANDBY AIR CONDITIONING SYSTEM Scania original Extra cab heating water/air 3kW Air conditioning Air conditioning and heating system LED headlights LED fog lights 3-diode LED daytime running lights + position/marker/outline/indicator LED tail lights LED work lights on rear wall of cab High beam headlights in front grille Cab suspension air comfort Double-glazed door window WSS tinted Roof spoiler height-adjustable manually with crank ALCOA DuraBright alloy wheels with MICHELIN tires Special paint finish frame + plastic parts Front grille paint V8 black (Ebony/Black Brilliant) Contrasting black door/side panel (glass) Aluminum checker plate cover up to fifth wheel coupling Aluminum checker plate tool box, right on frame Frame special paint finish + plastic parts Additional interior fittings: Engine tunnel cover Black leather trim Electric roof hatch incl. mosquito net Roof liner backlighting Backlighting cab rear wall Ambient interior lighting Side sun visor inside driver's side Roller blind Black leather floor mats Side AIRBAG driver's side Equipment packages: Premium infotainment package with NAVIGATION 7'' display and driver package Premium driver package with armrest (Opticruise) Seat upholstery package LEDER black MCC Underline package 2 with side trim Safety package with assistance systems Comfort package CR cab Light package Climate system package Air conditioning+ Premium + with heating Assistance systems: Assistance systems Scania AEB (Emergency Brake Assist) + Scania LDW (Lane Departure Warning) + Scania ACC (Adaptive Cruise Control) Scania AEB (Emergency Brake Assist) Scania-ACC (distance control) Scania-LDW (Lane Departure Warning) Communication: Infotainmant System Premium 7'' display Infotainment voice control Map data Europe Bluetooth for radio Infotainment switch in the steering wheel Speakers Premium Version 4x20W Dual Coil Radio with DAB (Digital Audio Broadcast) Cell phone preparation Speedometer remote download (switch) Scania Comunicator C300 etc. ... VA tires: 385/65R22.5 ...MICHELIN... HA tires: 315/80R22.5 ...MICHELIN... 1st owner / 1st owner SCANIA Servicegepflegt / SCANIA Service maintained ! für weirere Info's / for more Info Mobile-Tel.: +43 664 4477030 Would you like to visit us? We offer a free pick-up service from the train station in 4020 Linz. We take care of all customs matters for you. Where to put the used car? ...if you agree, we will be happy to trade it in. The offer is non-binding and subject to change. Subject to errors and prior sale.

Year of construction: 2024, condition: new, functionality: fully functional, With the V.0102-gn, FOBA offers a marking laser in the green spectrum (532 nm wavelength) with low heat exposure. Thanks to 10 watts of laser power, markings can be applied with outstanding speed and contrast sharpness on surfaces that cannot be sufficiently marked with other wavelengths. This includes many white and transparent plastics, highly reflective metals and material combinations. Even red or orange plastic surfaces, which often offer poor contrast due to their color properties, receive perfectly legible codes and characters. The marking quality is also impressive on special plastics such as UHMWPE, HDPE and PMMA. In most cases, the green lasers also make laser additives superfluous. Nwedst Etkkepfx Agrel The FOBA V.0102-gn marking laser closes the gap between UV (355 nm) and fiber (1064 nm) laser systems and thus addresses the most challenging marking applications. The V.0102-gn is used in automotive and aircraft construction, as well as in medical technology, electronics, extrusion, but also in the marking of sensitive materials such as ceramics, flame-retardant plastics, plastics and materials for invasive purposes.

Condition: used, KB Prüftechnik Hardness Testing Machine, Type: KB 750 BVRZ Machine Type: KB 750 1 kg - 750 kg UNIVERSAL DIGITAL KB universal hardness testing machines for automatic and standard-compliant hardness testing. Suitable for all hardness testing methods in the load range HV 0.2 1 - 3000 kgf, Vickers, Brinell, Rockwell, Super-Rockwell, Knoop (only HK 1), ball indentation hardness (plastics) and depth measurement according to Vickers and Brinell. Fully automatic testing sequence, evaluation of the indentations on the integrated LCD monitor using an integrated video camera and zoom lens guarantees the highest evaluation accuracy according to the standard. All hardness values are displayed digitally immediately. User-friendly and powerful control panel with a color LCD monitor, high contrast and glare-free. The measurement of the indentation is performed without parallax. The testing forces are electronically controlled and applied with the highest precision. The video image can optionally be output as a BMP file. All KB hardness testing machines are supplied with a basic equipment package that enables immediate operation with the ordered indenters. A selection of fixtures, testing tables, indenters, lenses, hardness comparison blocks, etc. is available. A connection to a PC or central computer is possible with all KB hardness testing machines. In conjunction with the fully automatic software and motorized cross table, the machine can be operated as a fully automatic system. fully automatic testing sequence optical evaluation via integrated video evaluation extremely user-friendly and powerful large LCD color display industrially designed foil keypad variable software adaptation Zoom lens 1:7 parallax-free measurement load cells, controlled load application, LED lighting Rockwell resolution 0.025 HRC extremely powerful 200 freely definable test programs Calibration machine accuracy (option) new LED ring light (option) automatic image evaluation (option) 2 interfaces parallel + serial, as well as keyboard connection extended load range XL (option) freely switchable language selection Njdpozg Tyuofx Agrewl German, English, French, Italian KB750 BVRZ: Test load 3-750 kgf Brinell ISO 6506 HB depth measurement Vickers ISO 6507 HV depth measurement Rockwell ISO 6508 Rockwell ISO 6508 Superrockwell Testing table ∅80 mm Motor zoom 1:7 Lens 4x for HV10-HB5/750 NOT suitable for HV5 Operating function: Programmable digital panel with the following functions: Measurement of the hardness indentation on the LCD display, with adjustable measuring marks, without parallax Logically structured, simple operating guidance Any number of test programs can be created and stored (200) Automatic force selection by selecting the testing method Freely selectable application times of the testing forces Freely selectable dwell times of the testing forces Online help Automatic correction for curved surfaces according to DIN EN ISO Control of the fully automatic testing sequence Direct, digital hardness value display Tolerance display Conversions according to DIN 50150 Table B1 Protocol generation in DIN A4 format with standard printer via parallel interface Serial interface for data output to PC Optional network 4 languages: German-English-French-Italian Statistics functions, such as: Number of tests Min / Max Average Range Standard deviation cp / cpk Histogram (Changes and errors in the technical data are subject to change!)

Condition: new, functionality: fully functional, Year of construction: 2025, machine/vehicle number: plate roll, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: MG EVO, controller model: EVO 4 AXIS, number of rollers: 4, roller (bottom) diameter: 140 mm, roller (top) diameter: 160 mm, side roll diameter: 150 mm, roller diameter: 200 mm, roller length: 2,050 mm, working width: 2,000 mm, working height: 700 mm, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, sheet thickness stainless steel (max.): 6 mm, sheet thickness aluminum (max.): 6 mm, overall weight: 2,200 kg, total length: 3,200 mm, total width: 1,100 mm, total height: 1,200 mm, power: 4 kW (5.44 HP), input voltage: 400 V, number of digital displays: 4, warranty duration: 12 months, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, 4 ROLL BRAND MG ITALY, HYDRAULIC MODEL M2006P EVO_CNC PLATE BENDING ROLL PLANETARY DESIGN DOUBLE PINCH PRE-BENDING CNC_EVO PROGRAMMABLE AUTOCALCULATION AUTOMATIC PLATE ROLLING Capacity: -Width of plate: 2000 mm -Thickness of plate rolling 6 mm -Thickness of plate pre-bending 4 mm Rolls -useful width mm. 2050 -Top roll mm. 160 - Lower roll mm. 140 Nwjdpfxjw Dnd Sj Agrol Configuration installed: • Surface hardening of the four rolls, smooth finishing suitable for stainless plates rolling • Dual pre-pinch, with adjustable force upon the input of plate thickness • Conical bending hydraulic attachment - hardened contrast pad. • Power driven rolls rotation top/bottom gearbox axial direct drive hydraulic each roll. • Calibration system for re-rolling of welded shells rounding. • Console electric independent with centralized commands joysticks and CNC screen readout. • CNC controller on touch screen 15” , CAD/CAM interface 4 axis auto calculation software package. with digital readout of the axis for use in manual rolling, semiautomatic and fully automatic programmable. • Opening front side hydraulic drop-end to unload closed shells. • Variable working speed step-less axis interpolation. • Safety installation with emergency stop. • Instruction manuals for operation and service.

Year of construction: 2026, condition: new, ceramic ball mill ,Batch ball mill ,also called ceramic ball mill ,it is used for fine grinding of feldspar,quartz,clay,ore and so on.The ceramic ball mill is mainly used for material mixing, grinding,uniform product fineness,and saving power.It can be dry or wet.The machine can use different liner types according to production needs to meet different needs.The fineness of the grinding operation is controlled by the grinding time ceramic ball mill Working principle when ball mill working,steel balls inside drum will rotate with the drum to some height,and then steel balls fall down with materials to reach the point of grinding. Working Principle of Ceramic ball mill ceramic ball mill ,Intermittent ball mill grinding operation is finished in the cylinder body. When the cylinder rotates, materials ascend to a certain height and then fall along a certain path due to the balls' gravity. Two forces are generated on the balls inside. One is the force on balls through tangent direction; the other is a opposite force in the contrast to the diameter of balls, as a result of the force generated when the balls slide down. These two forces will constitute a couple for the steel balls. The balls are squeezed between the cylinder and the adjacent steel balls, so the couple can make unequal-sized friction force. The balls will orbit along with the cylinder axis and then fall down, which can produce a strong impact force on the ores in the cylinder body and, as a result, the ores will be crushed. In conclusion, the ores in the cylinder body are mainly crushed by composite effect of peeling force, impact force and extrusion force. Ceramic ball mill also named Intermittent ball mill which adopts the wet intermittent operation, is used for fine grinding and mixing the material such as feldspar, quartz, clay ceramic raw materials. The discharging and the mud size can through through 1000 sieve pore. This machine is high milling machinery, materials should be Broken in the fineness of the state into the grinding mill to get the highest efficiency and economic benefits. The cement mill is key equipment for the grinding process of the cement clinker after the crushing process of it. It is mainly used in the cement silicate product industry. After long term design and manufacture of the cement mill, our company now has series of cement mill with various specifications to meet with different requirement from our customers. Features of Cement Mill Our company adopts suitable transmission methods according to different specifications. We have brim drive and center drive as transmission form. The cylinder adopts new type step lining to increase the grinding area. And it is easily repairable and changeable. The new designed separate-chambered structure adopts flexible lifting blade and fixed lifting blade and it is easily fixed and repaired. Nsdpfx Ajvzx Auegrowl Technical Details We have different models and options for different requirements, please contact us for more info.

Year of construction: 2004, condition: good (used), Main Technical Specifications • Web width: max. 330 mm • Max. web speed: 200 m/min Nedpfx Agoylynworjwl • Max. inspection speed: 150 m/min (100% inspection) • Unwind roll diameter: max. 700 mm • Rewind roll diameter: max. 500 mm • Core diameter: 76 mm (pneumatic expanding shafts) • Web tension control: 0.5 – 10 kg, steplessly adjustable • Electronic web guiding system (Fife with ultrasonic sensor) Slitting & Finishing • Shear knife slitting unit • 3 top and 3 bottom knives included • Fine adjustment in 0.05 mm increments • Integrated edge trim extraction • Pneumatic splice unit • Integrated label and meter counter Inspection System fleyeVision print inspection system (100% inspection) • Matrix camera (1380 x 1040 pixels) • Flash illumination • Detection of print defects such as missing print, register deviation, spots, missing labels, missing text, matrix waste Inkjet System Imaje S8 Master 2.2G • Two nozzles per printhead • Suitable for marking up to four label lanes • Fully integrated into the central machine control system

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 13451500, STEINLE 1345 Digital Caliper Lightweight Design 1500 mm Workshop Caliper - Jaws 150 mm Both measuring jaws adjustable Product details Measuring jaws made of lightweight metal with oxide coating Left measuring jaw adjustable Hole starting point 20 mm, with extra large digits - Dirt wiper integrated in the slider - Battery operating time up to 3 years Nwedsy Dq Hvepfx Agrol - Measuring speed 2.5 m/s (100?/s) - High-contrast LCD display, 20 mm digit height Functions ON/OFF mm/inch Preset A: 1500 mm B: 55 mm D: 150 mm E: 20 mm Deviation: 0.1 mm

Condition: new, Year of construction: 2025, functionality: fully functional, shaft length: 1,070 mm, laser power: 60 W, type of cooling: air, warranty duration: 12 months, laser wavelength: 1,070 nm, Equipment: cabin, Laser engraving machine with 60-watt laser power (new) - 60-watt MOPA laser (enables color laser engraving on stainless steel) - incl. 4th axis (rotary unit) - incl. Windows 10 Pro 64-bit PC system - incl. 22" monitor - everything fully installed and calibrated Nodpfx Agsfkgq Norjwl - Engraving software in German - very easy to operate - switch on and start - Fiber laser source with 60 watts for high-contrast and fast markings with extremely high resolution (see images) - Deep engraving up to 4mm possible (also in hardened steel) - Wobble function, e.g., for cleaning metal components - for engraving on many metals (stainless steel, brass, aluminum, etc.) and many plastics - heavy-duty industrial quality - Complete system / ready for immediate use - Working area approx. 500 x 600 x 600mm (l x w x h) - Clamping surface with fastening threads in a 50mm grid - LED work area lighting - 50mm pipe connection for fume extraction - Engraving area approx. 180 x 180mm - expandable to approx. 300 x 300mm - incl. foot switch to start the engraving process Please also note our attractive leasing/hire-purchase offers. Sales are exclusively to commercial businesses. Delivery / Consulting / Sales only in Germany / Austria / Switzerland Machine dimensions approx.: Width: 800mm Height: 1800mm Depth: 1000mm Weight: approx. 150kg

Year of construction: 2014, condition: excellent (used), Gainsborough Vertical Form & Seal Bagging Machine Nodpfsuct Ivox Agrjwl Continuous VVF Bagging Machine Complete with Markem-Inage SmartDate X40 Coder In Excellent Condition Has had very little use

Condition: used, functionality: fully functional, first registration: 11/2024, Year of construction: 2024, We are offering this used LITHEC LithoFlash Inline HBDM XL75 Inpress Control Lithec Heidelberg XL75, year of manufacture 2024. The Lithec system is a suitable alternative to Heidelberg’s InpressControl. Type: LithoFlash® Inline HBDM XL75 Serial Number: GG 0326 Year of Manufacture: 10/2024 The system was removed because the press it was installed in has been sold to Asia, where there is no demand for this system. Inline measurement and control system for offset printing Reduced make-ready times increase job throughput. Significant waste reduction results in direct substrate cost savings. In addition, using a measurement and control system also ensures production quality. Application Areas • For sheet-fed and web offset printing presses with a production width of 52–205 cm • Measurement and control of process ink and special color densities • Monitoring of tone value increase, print contrast, and trapping parameters Customer Benefits • High savings thanks to LithoDyn dynamic control • Minimal energy costs due to flashing LED • Clearly structured, user-friendly interface • Definable print control strips • Effective protection against contamination thanks to innovative glass/visor system • Long service life and low operating costs Measurement Methods and Sensors • Wear-free sensor system with integrated dust and dirt protection • Density measurement in accordance with ISO standards • Parallel measurement of all density channels over the entire print width • Measurement of each sheet Nwodpfxjyrp Ums Agrsl • 0/45° optics • Maintenance-free, long-life LED measuring light • Polarizing filter • Measuring range: 0.0 – 2.2 D • Use of existing print control strips possible • Selectable height, width, and configuration of measurement fields (minimum size 3×4 mm) • Strip library for optional use of various print control strips • Reproducibility: 0.01 D depending on measurement conditions • Line speed up to 15 m/s Scope of Delivery • Sensor crossbar • Control unit, industrial PC with 23” touchscreen • For the operation of necessary electrical and mechanical assemblies • Advanced Dust Protection (enhanced contamination protection) • LithoDyn (dynamic control) • LithoJobChange (dynamically controlled job change) • LithoFlash One Shot (measurement and control with press at standstill) Naturally, the system can also be installed on machines other than the XL75, such as: KBA RMGT Komori Manroland If you have any questions or would like further information, feel free to send us a message or give us a call.

Condition: used, This listing is for the Olympus CX31RBSF Microscope The unit is in full working condition and is ready for immediate use Overview The Olympus CX31RBSF is an upright, binocular compound biological microscope, part of Olympus’s CX series known for its durable, ergonomic design and high-quality optics tailored for educational and routine clinical use. Key Features & Specifications Optical System & Image Quality Utilizes the UIS 2 (Universal Infinity System) optical system, delivering bright, high-contrast images with excellent field flatness. Equipped with Planned Achromat (PLCN) objectives offering superior sharpness and clarity across the field of view. Features integrated anti-fungal treatment on optics to preserve performance in high-humidity environments. Optical Components Eyepieces: Wide‑field binocular type (Field Number = 20), with a 30° inclination and interpupillary adjustment between 48‑75 mm. Objectives (typical standard set): Plan Achromats at 4×, 10×, 40×, and optionally 100× oil immersion (in some configurations). Scribd Condenser: Built‑in Abbe condenser with NA of 1.25 (with oil immersion) and aperture iris diaphragm for precise illumination control. Illumination & Stage Comes with a built‑in Köhler illuminator using a 6 V, 30 W halogen bulb. Stage: Rackless design with a double-slide holder, complete with ergonomic tactile grips for smooth X‑Y movement; stage travel approx. 76 mm × 50 mm. Ergonomics & Build Quality Featuring a rigid Y-frame, low-positioned coaxial coarse/fine focusing knobs, and pre‑focus upper limit to prevent contact with slides. Integrated hand grips make transport within labs easy and safe. Some models in the CX31 line include tilting binocular tubes, though CX31RBSF is typically fixed Dimensions & Operating Conditions Approx. 233 mm (W) × 411 mm (H) × 367.5 mm (D), weighing around 7.7–8 kg. Designed for indoor use at altitudes up to 2000 m, ambient temperature range 5 °C to 40 °C, with humidity restrictions depending on temperature. Njdpfx Aoxhfd Ijgrswl

Condition: new, neu Bulgarien 58370 € 1103.19 € 600 mm 2000 mm 0 mm 80 mm 400 mm 400 mm 8 90 MK 3 20 - 100; 80 - 400; 400 - U/Min Njdpeyq Stpsfx Agrewl 120 64 0.5 - 120 mm 60 - 1/4 Gänge/" 315 mm 1 mm 90 mm 5 MK 2 mm 11 kW 3600 mm 1500 mm 1650 mm 3110 kg In contrast to the universal lathes, here the adjustment of the revolutions is infinitely variable by means of a frequency inverter. It is possible to ensure a "constant cutting speed" (V-const), i.e. when changing the diameter to be machined, the speed remains unchanged and thus a higher accuracy and smoothness of the surface is achieved. At the customer's request, the machines can be manufactured with a reading of the linear displacement and positioning by mounting a digital display. driven by variable speed control (3 steps) 3-axes digital readout Fagor with CSS (constant surface speed) quick change toolpostAmestra type Multifix with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 250 mm spindle dead center main motor with frequency invertor four way rapid traverse device longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length1.000 mm € 54970,00 turning length1.500 mm € 56350,00 turning length3.000 mm € 62720,00 turning length4.000 mm € 685,00 turning length5.000 mm € 83910,00

Condition: used, This listing is for 1 of 4 Parker SciLog SciCon Conductivity Monitor. The unit is in full working condition and is ready for immediate release. The Parker SciLog SciCon Conductivity Monitor is a state-of-the-art instrument designed to provide accurate real-time measurements of conductivity and temperature. Ideal for various applications in laboratories and industries, it ensures precise monitoring of liquid conductivity across a broad spectrum. Features: Nodpfx Aexxyafegrswl - Real-Time Data Display: Offers instantaneous readings, facilitating quick assessments and adjustments in experiments or processes. - Wide Ranges: Effective for monitoring everything from ultrapure water to highly concentrated solutions, making it suitable for diverse applications. - User-Friendly Design: Intuitive interface and display allow users to easily navigate settings and view measurements. - Compact and Durable: Engineered for durability in laboratory settings, while its compact design saves valuable workspace. - Calibration Options: Supports easy calibration to ensure precise measurements tailored to specific application needs. - Data Logging Capability: Some versions may include features for logging data over time, aiding in research and compliance tracking. Key Specifications: - Conductivity Measurement Range: 1 µS/cm to 200 mS/cm - Temperature Measurement Range: 0° to 50°C - Display Type: High-contrast digital display for simultaneous readout of conductivity and temperature - Sensor Compatibility: Designed to work with multiple conductivity sensors for flexible utility Applications: - Ideal For: Scientific research, water quality analysis, environmental monitoring, food and beverage processing, and pharmaceutical applications.