Used Mash Agitator for sale (554)

Condition: used, 2 cylinder standing agitator tank made of stainless steel, used Contents: 50 cbm Order number: 3810 Material: 1.4401 in contact with product 1.4301 otherwise Inside weld seams ground to be food safe Dimensions: 3,000 mm internal diameter 3,100 mm external diameter 7,000 mm cylinder height 350 mm upper base 500 mm lower base 400 mm ground clearance 8,250 mm approx. total height Iisdpfx Ajv Dthwenwec Design: cylindrical standing on frame with conical bases Propeller agitator installed at an angle in the cylinder, 12 kW, 980 rpm. Double jacket on the cylinder, 2 circuits approx. 14 sqm, 76 liters each and on the lower floor, 1 circuit, approx. 5 sqm, 90 liters Operating overpressure 2 bar Insulation 50 mm PU foam around cylinder, upper floor and frame, stainless steel cover with manufacturer's certificate and material certificates Connections: 1 manhole 340 x 440 mm in the cylinder Ventilation Ø 300 with spray head in the upper floor Outlet bottom center DN 65 extended Weight: approx. 6.5 tons

Condition: ready for operation (used), 1 cyl. standing stainless steel agitator tank, used capacity: 50 cbm order number: 3750 material: V2A Dimensions: 3.300 mm diameter 5.700/5.900 mm cyl. height 400 mm upper bottom 1.700 mm height agitator 8.000 mm total height execution: cyl. upright with lower flat bottom inclined bottom sloping towards the outlet - must be shimmed during installation otherwise the bottom will crack - with upper conical bottom trapezoidal agitator from top centered approx. 5 kW, approx. 30 rpm. with external half-pipe coil, 18 sqm at the cylinder, for tightness tested with 2 bar operating overpressure upper bottom insulated, cover stainless steel fully welded connections: 1 manhole 340 x 440 mm in cylinder top centered 1 spray head 2 connections DN 65 at the lowest point weight: approx. 5 to Isdoiq Izdjpfx Anwoic

Condition: excellent (used), Year of construction: 1997, Equipment: type plate available, GUTH ENGINEERING Mixing Tank 300 L Pressure-resistant magnetic stirrer with heating jacket Tank capacity: 300 litres Jacket capacity: 33 litres Isdpfx Ajw U Sw Aenwsic Usable volume: approx. 50-250 litres Product-contact parts made of stainless steel Operating overpressure: inside: -1 / +3 bar, jacket: -1 / 5 bar Year of construction: 1997 Space requirement: 120 x 90 x 210 cm

Condition: good (used), Forced mixer, agitator, stirring device, mixing tool, stirrer -Nominal input: 1050 watts -Connection: 230 volts -Speed: 230 rpm -Dimensions: 1000/520/H130 mm Iiedpfx Ansb A Rgijwoc -Weight: 10 kg

Condition: good (used), Forced mixer, agitator, stirring device, mixing tool, stirrer Iiedpfeb A Hhwsx Anwsc -Nominal input: 1400 watts -Connection: 230 volts -Speed: 0-510 rpm -Dimensions: 600/500/H180 mm -Weight: 8.5 kg

Condition: good (used), Forced mixer, agitator, stirring device, mixing tool, stirrer Ijdpfxsb A Ikae Anwoic -Nominal input: 1400 watts -Connection: 230 volts -Speed: 150-470 rpm -Dimensions: 920/450/H220 mm -Weight: 7 kg

Condition: good (used), Forced mixer, agitator, stirring device, mixing tool, stirrer Iisdob A Rgmepfx Anwoc -Nominal power input: 1020 watts -Connection: 230 volts -Speed: 360/425 rpm -Dimensions: 670/450/H180 mm -Weight: 9 kg

Condition: good (used), Forced mixer, agitator, stirring device, mixing tool, stirrer -Nominal input: 950 watts -Connection: 230 volts -Speed: 670 rpm -Dimensions: 1000/380/H240 mm Isdpfx Anjb A Rghowoic -Weight: 5 kg

Condition: good (used), Forced mixer, agitator, stirring device, mixing tool, stirrer Iiodpfjb A Rgksx Anwsc -Nominal input: 1000 watts -Connection: 230 volts -Speed: 500 rpm -Dimensions: 650/300/H200 mm -Weight: 6 kg

Condition: good (used), Forced mixer, agitator, stirring device, mixing tool, stirrer -Nominal input: 1400 watts -Connection: 230 volts Iijdpfx Aeb A Rnzonwoc -Speed: 0-510 rpm -Dimensions: 600/500/H180 mm -Weight: 8.5 kg

Condition: good (used), Forced mixer, agitator, stirring device, mixing tool, stirrer Isdpfeb A Rgdjx Anwsic -Nominal input: 1400 watts -Connection: 230 volts -Speed: 150-470 rpm -Dimensions: 920/450/H220 mm -Weight: 8 kg

Condition: good (used), Forced mixer, agitator, stirring device, mixing tool, stirrer Iedpfx Aneb A Rglewjic -Nominal input: 1000 watts -Connection: 230 volts -Speed: 500 rpm -Dimensions: 500/200/H100 mm -Weight: 5 kg

Condition: used, Equipment: type plate available, Electrically heated agitator tank with double jacket and insulation Article number: 10707 Volume: 300 L Type: Vertical, standing on 3 legs Leg height: 220 mm Material (product-contact): V2A stainless steel Design: Electrically heated Operating pressure according to nameplate: ATM (atmospheric) Tank dimensions: Internal diameter: 700 mm External diameter: 950 mm Cylindrical height: 730 mm Total height: 2030 mm Total width: 1120 mm Total length: 1340 mm Equipment: Nameplate: Yes Discharge to floor distance: 415 mm Outlet valve: Ball valve Outlet diameter: DN40 Opening: 235x750 mm Beam agitator Double jacket: 100 L Ijdpfx Anow Ic Niswoic Insulated Control cabinet Foldable lid 1/2

Condition: new, Factory-new stainless steel agitator tank with propeller agitator Type: CILC100BRWP Volume: 109L Design: Vertical construction on legs Version: Single-walled Product-contact material: 1.4301 stainless steel Surface: Satin-finished exterior, interior BA finish Internal weld seams: Pickled, passivated, and brushed Operating pressure: Atmospheric Top cover: Hinged lid, half bolted, half foldable Bottom: Conical bottom with forward-extended DN25 pipework, DIN11851 Tank dimensions: Tank diameter: 477mm Overall height: 930mm (plus agitator motor) Cylindrical height: 600mm Leg height: 330mm Equipment: - Hinged lid with stainless steel sheet grate as reach-in protection, bolted, removable - Hold function for hinged lid - 1x DN25 discharge ball valve, DIN11851 Agitator: Propeller agitator Brand: Schwarzer Rührtechnik GmbH Type: SRT4-1000 Power: 0.25kW Speed: 980 RPM Operating voltage: 3PH 400V Iiodpfx Asw Dy H Ssnwjc Product-contact material: 1.4301 stainless steel - Heavy-duty agitator shaft mounted to agitator motor, non-removable - Shaft balanced for concentricity within speed range - 1 piece 3-blade mixing propeller Ø125mm screwed onto end of agitator shaft - Stainless steel flange with V-ring seal, EPDM Agitator control: CEE plug switch on the tank, on/off switch, emergency stop, phase inverter, no-voltage release

Condition: new, Factory-new agitated vessel with dissolver Type: STOC2200RWD Volume: approx. 2,266 liters Design: Vertical construction on three height-adjustable feet Construction: Single-walled Medium-contacting material: 1.4301 stainless steel (AISI304) Surface: External satin finish, internal BA (IIId) Internal weld seams: Pickled, passivated and brushed Max. operating pressure: Atmospheric Max. operating temperature: 95°C Top: 15° conical top Bottom: 15° conical bottom with central outlet DN50 DIN11851 Tank dimensions: Tank diameter: 1,430 mm Cylinder height: 1,250 mm Total height: 2,160 mm Foot height: 500 mm Outlet to floor distance: 350 mm Equipment: 1x Ø 500 mm manway cover with swivel bracket on top, EPDM gasket 1x agitator flange connection IEC200 3x calotte / height-adjustable feet 1x stainless steel vent/bleeder valve DN50, non-pressurized, on the top 1x DN50 DIN11851 outlet port centered in the bottom 1x DN50 DIN11851 port with blanking cap on the top 1x DN65 DIN11851 port with blanking cap on the top 2x lifting lugs on the top 1x ladder bracket on the cylinder 1x nameplate Agitator: Dissolver Manufacturer: Schwarzer Rührtechnik GmbH Type: SRTDMK/7.5-1500 Power: 7.5 kW Speed: 1,410 RPM Operating voltage: 3PH 400V Iiedpfxsw Dy Hlj Anwjc - Heavy-duty agitator shaft mounted to the agitator motor with muff coupling - Agitator shaft dynamically balanced for smooth running within the speed range - 1 piece dissolver disc Ø 275 mm screwed onto the end of the agitator shaft - Stainless steel flange with V-ring seal, EPDM - Motor mounted flexibly on neoprene rubber-metal buffers

Condition: new, Factory-new stainless steel transport container with anchor agitator Isdpfxsw Dy Nge Anweic Type: SLA1150RWA Volume: Approx. 1150L Design: Vertical construction with forklift pockets Execution: Single-walled, min. 1.5mm wall thickness Material (media-contacting): 1.4301 stainless steel Surface: Satin finish outside, IIId inside Internal weld seams: Pickled, passivated, and brushed Operating pressure: Atmospheric Top cover: Central traverse with two hinged lid halves Bottom: Torispherical head with discharge groove Tank dimensions: Tank diameter: 1190mm Cylinder height: 1000mm Total height: 1300mm (plus agitator motor) Features: - Central traverse with two hinged lid halves, stainless steel perforated plates underneath the hinged lid as reach-in protection, bolted, removable - Tank mounted on a stainless steel transport base with forklift openings - DN50 disc valve outlet fitting DIN1185, seal EPDM - Nameplate Agitator: Central anchor agitator Manufacturer: Schwarzer Rührtechnik GmbH Type: SRTGMK/0.75-13 Power: 0.75KW Speed: 13 RPM Operating voltage: 3PH 400V Product-contacting material: 1.4301 stainless steel - Gearbox by Getriebebau NORD - Solid agitator shaft connected to the agitator motor with a sleeve coupling, removable - Agitator shaft balanced for smooth rotation within the speed range - Large-surface stainless steel anchor-style agitator, welded design, weld seams pickled, passivated, and brushed - Stainless steel flange with shaft seal, EPDM Agitator control: CEE plug switch on the tank, on/off switch, no-voltage release, emergency stop Fully prewired

Condition: good (used), Used agitator tank with insulation on castors Electric heating does not work! Item number: 10784 Last use: Pharmacy Volume: 300 liters Type: Upright on 4 castors Material (wetted parts): 1.4571 / AISI316 Version: with insulation Operating pressure according to type plate: +0.5 bar Max. Max. operating temperature: + 95 °C Tank dimensions: Manhole: 410mm Inner diameter: 700mm Outer diameter: 800mm Isdpfx Aerl Rtuenweic Height of the feet: 870mm Total height: 1700mm Total width: 870mm Total length: 950mm Cylindrical height: 650mm Materials: Interior: 1.4571 / AISI316 External parts: 1.4301 / AISI304 Equipment: Type plate: Yes Outlet diameter: DN25 Distance drain to floor: 365mm Propeller agitator Empty weight: 184Kg

Condition: excellent (used), Used agitator tank / paste mixer With pump / conveying unit Item number: 10314 Volume: approx. 70 liters Previous application: Food processing Type: Upright in frame Material (wetted parts): Stainless steel Number of fixings: 4 Bottom: Conical bottom Top: Hinged lid with charging opening Tank dimensions: Internal diameter: 380 mm External diameter: 400 mm Leg height: 745 mm Distance from outlet to floor: 180 mm Iiodpfexdw Rlox Anwec Total height: 1620 mm Total width: 650 mm Materials: Internal: 1.4301 / AISI304 External parts: 1.4301 / AISI304 Agitator: Spiral agitator / anchor agitator with wall scrapers Features: Nameplate: No Outlet: Bottom valve Pump / conveying unit beneath the tank Agitator function tested, pump / conveying unit not tested

Condition: like new (used), Year of construction: 2012, JANKE + KUNKEL TURBOTRON SFH ATEX agitator Generator version with propeller agitator Max. batch size: 200 liters ATEX version Infinitely variable drive up to 1,100 rpm Manufacturer: IKA Iiedowu Uk Hjpfx Anwec Year of manufacture: 2012 Space requirement: 170 x 130 x 225 cm

Condition: not inspected (used), Volume: Approx. 6000 L Type: Standing on three feet Tank diameter: 2250mm heatable/coolable double jacket Iiedpfx Aehg Nk Donwec Enamelled tank

Condition: not inspected (used), Volume: Approx. 6000 L Ijdohg Niqepfx Anwoic Type: Standing on three feet Tank diameter: 2250mm heatable/coolable double jacket Enamelled tank

Condition: not inspected (used), Volume: Approx. 5000 L Type: Standing on three feet Iiodpfxshg Nlpo Anwec Tank diameter: 2100mm heatable/coolable double jacket

Year of construction: 2010, condition: excellent (used), Stainless Steel Conatiner with Agitator, heatable with Pump Iisdpfehytidex Anwoc

Condition: used, Outer diameter: 340mm Bolt circle: 290mmHole diameter: 23mm Iiedpexytybefx Anwsc

Condition: good (used), functionality: fully functional, Year of construction: 2007, operating hours: 1,153 h, DYNO-MILL KD 6 Agitator Bead Mill (2007) For sale is a DYNO-MILL KD 6 horizontal agitator bead mill, manufactured by Willy A. Bachofen AG (WAB). This machine is a premium Swiss-made unit designed for the continuous dispersion and wet-grinding of pumpable products, ranging from low to high viscosity. Iijdpfx Aox Tdyzsnwec This unit was manufactured in 2007 and decommissioned in fully functional, running condition with no known faults. It is distinguished by its exceptionally low usage history, having logged only 1’153 operating hours. It comes equipped with a high-wear-resistant Silicon Carbide (SiSiC) inner cylinder and hardened stainless steel discs. It is sold as a complete bundle, including a peristaltic pump, a tool kit, the original electric cabinet and yttrium-stabilized zirconium balls (used). Highlights • Low Usage: Only 1'153 operating hours—internal mechanics are in excellent condition. • High-End configuration: Fitted with a ceramic Silicon Carbide (SiSiC) inner cylinder (6mm wall thickness) and hardened stainless steel discs for durability and contamination control. Sintered Silicon Carbide (SSiC) prevents product overheating significantly better than Zirconium or Steel liners. • Ready to Run: Sold as a complete package including the Electric Cabinet and a Peristaltic Product Pump. • Features the industry-standard WAB dynamic gap separator and pressure-balanced mechanical seal. • Voltage: Fitted with a modern Danfoss VLT frequency converter featuring wide-range input (380-480V, 50/60Hz), making the machine immediately compatible with both European (400V) and US (480V) power grids without modification Technical Specifications • Manufacturer: Willy A. Bachofen AG (WAB), Switzerland • Model: KD 6 • Grinding Chamber Volume: 6.0 Liters (Net volume ~5.7 Liters) • Throughput: approx. 50 – 200 kg/h (dependent on product/viscosity) • Main Drive: 11 kW Motor (440V / 60Hz rated) • Separation System: Dynamic gap separator (Tungsten Carbide rotor/stator) with adjustable gap width (0.15–1.0 mm) • Shaft Seal: Double mechanical seal (DGD) with integrated pressure rinsing circuit • Cooling: Forced water cooling jacket for the grinding cylinder • Weight: 695 kg 
 Scope of Delivery • Mill: DYNO-MILL KD 6 base unit • Grinding System: Silicon Carbide (SiSiC) Inner Cylinder & Hardened Stainless Steel Discs • Feed Pump: Peristaltic Pump included • Controls: Original Electric Cabinet included • Grinding Media: Ceramic Beads, Zirconia Partially Stabilized with Yttria, four sizes, each approx. 25Kg (0.4 - 0.6 mm / 0.8 - 1.0 mm / 1.2 - 1.4 mm / 1.6 - 1.8mm) • Documentation: Operating instructions and wiring diagrams Condition • Mechanical: Excellent, running condition with no known faults at the time of decommissioning. • Cosmetic: The machine is clean but shows minor cosmetic wear (see pictures for visual details) • Last application: Food Typical Applications • Ideal for fine particle size reduction in industries such as: • Paints, Inks, and Coatings • Agrochemicals and Chemicals • Life Sciences and Microbiology • Food and cosmetics We ship worldwide. If you are interested or have any questions, please get in touch! Can be inspected in Liestal, Switzerland.