Used Mb International Heating Tunnel for sale (25,225)

Condition: used, Technical details: honing diameter: Ø 400 mm stroke: 600 mm throat: 390 mm table-size: 1.550 x 780 mm table surface area: 1.400 x 480 mm table:: fest total power requirement: 4,1 kW Weight approx.: 2,8 t dimension machine xH: 2,0 x 1,2 x 4,35 m Further technical details: - longitudinal travel of machine table approximately 500mm Gjdou Ngybspfx Aqgjuh - cross travel of machine table approximately 200mm - working height 350mm (non-adjustable) - distance column / table 0 - 200mm Equipment: - oil tank Ø 300 x 600mm - control panel i.D. *

Condition: good (used), Shrink tunnel from a German manufacturer: -Tunnel opening approximately 500 x 200 mm. -Temperature adjustable up to 250 degrees and transport speed adjustable up to 25 m/min. Godpfxeh U A I Rj Aqgeuh -Option for fixed or rotating tunnel bars. -Deflector plates allow the hot air streams to be adjusted separately at the top and in the middle. -Bottom air flow can be activated separately. -The machine can be moved or locked in place using adjustable foot rollers.

Condition: used, Demag Ergocontrol, 4 MB- for NC4 control system - removed from Demag ET 6 system - removed from running machine - fully functionalmanufacturer: Demag spare part no.: 7If the spare part is traded in exchange, a partial credit note will be issued after receipt of the defective part and inspection by the manufacturer. We reserve the right to refuse a credit note due to the condition or age of the returned part. The defective part must be in a repairable condition, the credit note will be issued after feedback from the manufacturer. Guedpfjrr Ehmsx Aqgjh Dition: gebraucht

Condition: excellent (used), Year of construction: 2011, I sell the 4-lamp UV-drying tunnel Cefla UV-R M4/3500 Year 2011 Working width 1400mm. Total length 3,70m Gusdpfxjt S Ehze Aqgjh Total power 71,55 kW Very good condition, available immediately.

Condition: new, Year of construction: 2004, New heat exchanger Brembana Construzioni Industrial, year 2004, drawings included. Gedpfx Aevwbh Soqgsuh

Condition: used, honing diameter 99999 mm stroke 99999 mm Guedpfx Aqsv Twgisgoh throat 99999 mm Used panel of a NAGEL MSU2 No warranty

Condition: used, functionality: fully functional, Year of construction: 1990, machine/vehicle number: RAS 74.30; MB8001, control type: CNC control, working width: 3,200 mm, installation height: 2,400 mm, bending angle (max.): 135 °, sheet thickness steel (max.): 4 mm, sheet thickness stainless steel (max.): 3 mm, sheet thickness aluminum (max.): 5 mm, back gauge adjustment: CNC-controlled, back gauge travel distance Z-axis: 1,500 mm, overall weight: 6,000 kg, total width: 4,000 mm, input voltage: 400 V, input current: 32 A, input frequency: 50 Hz, type of input current: three-phase, The machine is in good condition. Control unit and relay board have been overhauled. Complete, segmented gooseneck tool, H=100, is included. Godpfx Asx Av Uaoqgeuh

Condition: excellent (used), 104 USED DAUB Thermo-Oil Tunnel Oven. TECHNICAL DATA: - Number of levels: 5, - Baking area: 40 m², - Heating boiler: 280x220 x 190 H, - Oven power: approx. 450 kW, - Giersch gas burner, - Power: 125-530 kW. BAKING CHAMBER DIMENSIONS (in cm): - W: 200, - L: 580. EXTERNAL DIMENSIONS (in cm): - W: 390, - L: 1300 - with loading and unloading devices, - H: 330. EQUIPMENT: - loading and unloading system, Guedpfxow A Iu Uj Aqgeh - in-oven steaming for each chamber, - post-baking water spray. We offer devices in various technical conditions and prices: 1. Directly from the bakery. 2. After inspection with a commissioning warranty. 3. After renovation with a 6-12 month warranty. The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: renovation / transport / assembly / commissioning of the device. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. ..... bakery oven, bakery ovens, rack oven, bakery machine, bakery machines, bakery equipment, bakery equipments, bakery device, bakery devices.

Condition: excellent (used), 105 USED DAUB thermal oil tunnel oven. TECHNICAL DATA: - Number of levels: 3, - Baking area: 40 m², - Heating boiler: 210x190 x 250 H, - Oven power: approx. 300 kW. BAKING CHAMBER DIMENSIONS (in cm): - W: 240, - L: 560. EXTERNAL DIMENSIONS (in cm): - W: 410, - L: 1360 - with loading and unloading devices, - H: 310. EQUIPMENT: - Loading and unloading system, - Oven steaming for each chamber, - Water spray after baking. We offer devices in various technical conditions and prices: 1. Directly from the bakery. 2. After inspection with a commissioning warranty. Guedpfsw A Ix Hjx Aqgeh 3. After renovation with a 6-12 month warranty. The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: renovation / transport / assembly / commissioning of the device. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. ..... bakery oven, bakery ovens, rack oven, bakery machine, bakery machines, bakery equipment, bakery equipments, bakery device, bakery devices.

Condition: used, functionality: limited functionality, power: 168 kW (228.42 HP), gearing type: automatic, fuel type: diesel, color: yellow, empty load weight: 20,650 kg, maximum load weight: 6,000 kg, Year of construction: 2023, Operation: Radio remote control Fire suppression system: Ansul Width: 2,335 mm Height with bucket raised: 4,400 mm Length, standard machine: 8,945 mm Height with bucket lowered: 2,235 mm Engine power: 168 kW / 225 HP Engine: Cummins B6.7, EPA Tier 4F/EU Stage V Tipping force, mechanical: 12,500 kg Breakout force, hydraulic: 13,400 kg Handling capacity, standard bucket: 6,000 kg Operating weight (empty): 20,650 kg Axle load front/rear: 8,910 / 11,750 kg Guodsytcy Ejpfx Aqgsh

Condition: good (used), Year of construction: 2004, functionality: fully functional, turning diameter over cross slide: 600 mm, turning length: 670 mm, turning diameter: 490 mm, overall weight: 6,500 kg, FOR SALE: High-Quality CNC Lathe Biglia B 658 MB (Year of Manufacture 2004) with Driven Tools + KID 70 Bar Feeder Are you looking for a reliable and robust workhorse for metalworking? For sale is a Biglia B 658 MB CNC lathe in good and fully functional condition. The machine is equipped with driven tools, an automatic tailstock, a reliable Fanuc control, and includes an automatic bar feeder. The complete package is available ex stock. General Information Manufacturer: Biglia (Italy) Model: B 658 MB Year of manufacture: 2004 CNC control: FANUC Series 18i-TB Condition: Good, fully functional Availability: Ex stock --- Key Technical Characteristics (Lathe) Maximum turning diameter: 380 mm Maximum turning length: 650 mm Maximum rod/bar diameter: 80 mm Maximum passage: 620 mm Spindle speed range: 30–3000 rpm Spindle drive power: 26/22 kW Spindle end: ASA 8″ Spindle bore diameter: 90 mm Diameter of the lathe chuck: 315 mm Bidirectional turret: 12 positions Turret indexing time (per position): 0.1 s Driven tool stations: 12 positions Max. speed of driven tool stations: 4000 rpm Max. torque of driven tool stations: 3.7 kW Feed in the X/Z/B axis: 220 / 650 / 660 mm Rapid traverse in the X/Z/B axis: 20 / 24 / 12 m/min Automatic tailstock maximum clamping force: 1080 Kg --- Round bar diameter: min. 5 mm (3/16") – max. 70 mm (2" 3/4) Square bar side: min. 5 mm (3/16") – max. 50 mm (2") Hexagonal bar height: min. 5 mm (3/16") – max. 60 mm (2 1/4") Maximum bar length options: 500 mm / 1615 mm Magazine capacity: 250 kg (e.g., approx. 60 bars of 10 mm) Bar change time: 50 sec (with a 1000 mm bar) Feed speed: 0–500 mm/sec Return speed: 1000 mm/sec Supply voltage: 230/400 Volt Control voltage: 24 Volt Installed power: 2 kW Weight: 580 kg Additional Equipment & Features KID 70 Bar feeder Measuring arm (Touch setter) Chip conveyor Collet chuck DIN 6343 Coolant tank capacity: 250 liters Coolant pump capacity: 150 l/min Coolant pump power: 0.73 kW Noise level: 74 dB(A) Gjdpfx Aqezbx N Eogouh Physical Dimensions (Lathe) Dimensions (L x W x H): 4000 x 1900 x 1850 mm Weight of the Biglia B658/BM: approx. 6,000 kg Contact us today to request a quote for this complete production package! The machines are ready for immediate dispatch. > *(All information is given in good faith but we reserve the right to make errors)*

Condition: like new (used), functionality: fully functional, Very good condition, the machines looks like new. Angle sealing machine and shrink tunnel Manufacturer: AVC Sealing Solutions Angle sealing machine, type HS-500 Sealing strip: 500 x 600 mm Machine dimensions: 1780 x 1020 x 1120 Gsdpfx Aoz Dwl Hoqgeuh Shrink tunnel, Type 1000 Tunnel opening: 440 x 300 mm Shrink length: 1000 mm Machine dimensions: 1800 x 1100 x 1600 Maximum heating power: 11 kW

Condition: used, mileage: 468,000 km, power: 315 kW (428.28 HP), first registration: 10/2015, fuel type: diesel, overall weight: 25,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, loading space length: 6,600 mm, loading space width: 2,500 mm, loading space height: 1,000 mm, Year of construction: 2015, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), parking heater, Well-maintained construction crane truck MB 2543 with Palfinger loading crane PK 34002 Special equipment: Loading crane Palfinger PK 34002 with 6 telescopic booms and 2nd knuckle system PJ060 with 3 hydraulic telescopic booms as well as hydraulics for attachments such as a stone clamp or fork Rear axle with forced articulation Axle load front axle 8.0 t, audio system: CD radio (Bluetooth), exhaust pipe pointing downwards to the right, battery 220 Ah, batteries arranged one above the other, brake connection standard and DuoMatic, compressed air connection in the cab, compressed air horns (2) on the cab roof, electrical pre-wiring in the cab 24V / 100 A, cab floor with engine tunnel 170 mm, cab: cab height 600 mm, suspension: front springs 8.0 t, 3 leaves, fuel tank: 390 liters aluminum, reinforced engine brake, trailing axle steered, auxiliary drive MB 123-10c, parameterizable special module, frame lowering without air spring residual pressure control, retarder, seats in the cab: driver's seat, sprung comfort seat, sun visor outside, sunblind for side window, driver's door, 12V socket in the co-driver's footwell, additional 24V socket in the co-driver's footwell, auxiliary heater (water), oil cooler for transmission Additional equipment: Emission standard EURO 6, axle configuration: 6x2, trailer brake 2-line, connections on the left, trailer socket 24V / 15-pin, Antos, exterior mirrors electrically adjustable and heated, differential lock rear axle, compressed air tank steel, compressed air unit medium, cab: width 2.30 m, cab: tilting mechanism hydraulic, cab: M ClassicSpace, cab variant: ClassicSpace, storage compartment outside left, cab: steel-sprung, standard, suspension: leaf / air, window lifters electric, windshield tinted, generator 100 A, transmission 12-speed - type: G 211-12, urea tank (AdBlue): 60 liters, lifting roof manually (steel), rear axle bevel gear 440, info display 10.4 cm, body / structure: chassis, comfort locking system, steering assistance pump unregulated, air intake from the front, air compressor 2-stage, engine 10.7 liters - 315 kW R6 diesel (OM 470), engine compartment encapsulation, trailing axle single-tired, ramp mirrors, spare wheel, waste heat recovery, disc brakes front and rear axle, seat cover / upholstery: fabric, seats in the cab: co-driver's functional seat, splash guard front, stabilizer front axle, additional stabilizer, rear axle / trailing axle, socket cab 24V, tachograph / EU control unit, underbody cladding aerodynamically shaped, underrun protection front, preparation for toll collection, front axle cranked, water pump regulated, permissible gross weight 25.00 t Tire condition: front axle approx.: 80% middle axle: approx.: 70% rear axle (steered axle) approx.: 70% Guodpfx Aqez Dzvisgeh OBU preparation All 200mm lashing points installed in the vehicle floor! New vehicle floor made of 27mm seawater-resistant glued plywood

Condition: used, Year of construction: 2012, machine/vehicle number: IntNr231316, Technical Data – Used LNS FOX IFS WS 500 Feature Specification Model FOX IFS WS 500 Year of manufacture 2012 Extraction capacity approx. 500 m³/h Motor output approx. 0.37 kW Voltage 400 V / 50 Hz (typical) Weight approx. 35 kg Dimensions approx. 465 × 500 × 1,145 mm (W x D x H) Filter stages 1. Pre-filter F5 2. Centrifugal separator 3. Post-filter F5 (optional: HEPA H13) Filtration efficiency 99 % at ≥ 1–2 µm (F9), optional HEPA 99.95 % at ≥ 0.1 µm Noise level approx. 65 dB (model WS2 similar) Accessories & Features Guedpfjz E N Tlox Aqgeh • Compact design for installation directly on or next to CNC machines • Stand for extraction • Three-stage filtration for efficient oil and coolant mist separation • Cartridge filter optionally upgradable with HEPA kit • Easy maintenance, low-noise operation, and durable filter elements Technical data and information subject to change and error. Prior sale reserved!

Condition: used, Year of construction: 2007, machine/vehicle number: IntNr231675, A high-performance MIKRON UCP 600 Vario 5-axis universal machining center, manufactured in 2007, is for sale. Technical data Working area Travel in X-axis: approx. 600 mm Travel in Y-axis: approx. 450 mm Travel in Z-axis: approx. 450 mm Number of CNC axes: 5 5-axis machining: yes Rotary/swivel table: NC-controlled Rotary/swivel table Godpfx Aoz E N T Soqgsuh Table diameter: approx. Ø 450 mm Max. workpiece/table load: approx. 200 kg B-axis / swivel range: approx. -115° to +30° C-axis / rotary range: 360°* Main spindle Tool interface: HSK-A63 Max. spindle speed: up to approx. 20,000 rpm Spindle hours: approx. 15,015 h Tool changer Automatic tool changer: available Tool interface: HSK-A63 CNC control Control manufacturer: HEIDENHAIN Control: iTNC 530 Coolant system Chip conveyor Mains voltage: approx. 400 V / 50 Hz The machine can be inspected by appointment. Subject to changes and errors in the technical data and specifications, as well as prior sale!

Condition: good (used), functionality: fully functional, current model HG 36 Thread-cutting capacity in ST 60: M10 - M 36 Drill chuck taper: B24 Guodpfxjz Ig Tno Aqgsh Motor power: 3 kW 6 speeds: 19 – 95 rpm

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, type of input current: DC, total width: 3,600 mm, total length: 2,500 mm, total height: 6,700 mm, - Harburg Freudenberger internal mixer production is underway - certified according to IATF 16949 until early 2026 - Type GK 255 N - Hydraulic ram, saddle, filling shaft flap - Pro c tec control system - with Siemens drive - Gearbox - Hydraulic unit - Lubrication unit - HF, CB, WM dosing - Engine overhauled in 2022 - Gearbox refurbished - Annual manufacturer inspection/maintenance/documentation Gjdez D E Dqspfx Aqgeuh - Upstream and downstream equipment available - Attractive package price possible

Condition: used, Year of construction: 2016, operating hours: 30,000 h, functionality: fully functional, machine/vehicle number: 2212725, type of input current: three-phase, power: 1,999 kW (2,717.88 HP), input voltage: 400 V, control cabinet width: 800 mm, control cabinet length: 3,000 mm, control cabinet height: 2,400 mm, rotational speed (min.): 1,500 rpm, rotational speed (max.): 1,500 rpm, total height: 3,200 mm, total length: 16,000 mm, total width: 3,200 mm, fuel: domestic gas H, overall weight: 45,000 kg, type of cooling: water, nominal power: 1,999 kW (2,717.88 HP), nominal power (apparent): 2,000 kVA, input frequency: 50 Hz, input current: 250 A, Equipment: documentation/manual, The CHP unit is used in the horticultural operation to supply electricity. It can operate in parallel with the grid or in island mode. It is maintained by the manufacturer under a full-service contract. It is in good condition and fully functional. The container is spacious and very comfortable for service work. The generator is connected to the circuit breaker via a copper busbar system, ensuring high quality. The container temperature is controlled automatically via electric sunshades. The switch room is heated and air-conditioned. An EMI box is installed for continuous NOx measurement. A 15-meter chimney is located on the roof. A ladder for exhaust gas measurement is included. The unit is sold “as is” for pickup at the premises. The sale is due to a change to wind power generation. The service contract, valid up to 60,000 operating hours, can be taken over if desired and possible. It is a perfectly designed container, extremely spacious and solidly built! It is intended to remain in operation until December 1, 2026. If necessary, it can also be dismantled immediately. We would be happy to arrange a viewing and demonstrate its operation. Gusdpjz D Ihfefx Aqgsh

Condition: used, Year of construction: 2013, functionality: fully functional, 2 units available, including silencer and gas control unit. Godpfsz D S Ngox Aqgeuh

Condition: good (used), Year of construction: 2003, Heat exchanger, cooling coil, cooling pipe, cooling spiral, shell and tube heat exchanger, oil cooler for screw compressor, compressor, stationary air compressor, plate heat exchanger Gedpfjz D T Tyox Aqgsuh -Manufacturer: Kaeser, plate heat exchanger heat recovery for Kaeser screw compressors -Type: PTG 141-281 -Volume flow rate: 1.48 m³/min Technical data: see photo of the nameplate -Number: 2x heat exchangers available Price: per piece -Dimensions: 810/385/H660 mm -Weight: 93 kg/unit

Condition: like new (used), Year of construction: 2019, operating hours: 7,300 h, machine/vehicle number: IntNr231648, For sale is a very well-maintained TORNOS Swiss GT 13-8 CNC Swiss-type automatic lathe, manufactured in 2019, with only approximately 7,300 operating hours. Technical data – TORNOS Swiss GT 13-8 Manufacturer: TORNOS Model: Swiss GT 13-8 Machine type: CNC Swiss-type automatic lathe Year of manufacture: 2019 Control system: FANUC 31i-B Number of CNC axes: 8 Number of spindles: 2 Operating hours: approx. 7,300 h Condition: very good Main spindle Max. bar diameter: 13 mm Max. machining length: approx. 190 mm Max. spindle speed: 15,000 min⁻¹ Spindle drive power: approx. 4 kW C-axis Counter spindle Max. machining/clamping diameter: 13 mm Max. speed: 15,000 min⁻¹ Drive power: approx. 4 kW C-axis resolution: 0.001° Tool turret 1 8 tool positions Speed of driven tools: up to 6,000 min⁻¹ Drive power: approx. 1 kW Tool turret 2 8 tool positions Speed of driven tools: up to 6,000 min⁻¹ Drive power: approx. 1 kW Front machining up to 4 tool positions Gusdjz Er Tnepfx Aqgsh Rear/opposite-side machining Up to 8 tool positions Of which up to 4 are driven positions Speed of driven tools: up to 6,000 min⁻¹ Drive power: approx. 0.75 kW Tool holder package is charged separately! TORNOS Robobar SBF 213 bar feeder High-pressure coolant system, type: HP-20-140 Kraft & Bauer fire extinguishing system ELBARON oil mist separator Supply voltage: 400 V The machine can be inspected while powered on by prior arrangement. Subject to changes, errors and prior sale!

Condition: used, FlowCook all stainless steel suitable for thermal oil heating (300kW) belt length ± 13.000 mm belt width ± 600 mm outfeed conveyor belt washing system electric hoists for the lid Gsdpoz Eikwefx Aqgjuh steam pressure : 4-8 bar outside dimensions (l x w x h) : ± 15.000 x 2.200 x 3.000 mm

Condition: used, Year of construction: 2006, Format: 450 x 350 mm Gjdpozu Spwefx Aqgsuh

Year of construction: 2005, condition: excellent (used), The designation TSHK160 refers to a rapid-heating mixer with a gross volume of 160 liters, while KGU400 describes a large-volume, universal cooling mixer with a gross volume of 400 liters. Both units are optimally matched to each other and enable a continuous, reproducible production process. Gedpfxsiup H Tj Aqgsuh - In ATEX design / explosion-proof - Bevel helical gear motor: 11 kW, n1 = 1300 rpm n2 = 104 rpm Motor IM V1 - Frequency controlled: 45kW 300/1500 rpm - Product-contacting parts: stainless steel 1.4541 - Hopper diameter: 300/200 x 350 Cooling mixer KGU400: - Capacity of the vessel KGU400: 391 liters - Capacity of the jacket KGU400: 45 liters - Min./Max. temperature TS. vessel and jacket KGU400: 5/95 °C - Min./Max. pressure PS. jacket KGU400: 0 / 0.5 bar - Test pressure PT jacket KGU400: 0.72 bar - Motor power: 11 kW High-speed heating mixer TSHK160: - Capacity of the vessel TSHK160: 210 liters - Capacity of the jacket TSHK160: 30 liters - Min./Max. temperature TS. vessel and jacket TSHK160: 0/158 °C - Min./Max. pressure PS. jacket TSHK160: 0/6 bar - Test pressure PT jacket TSHK160: 9.3 bar - Motor power: 45 kW - Working volume: 168 liters Accessories: 1. Platform with stairs MSH 80 2.Temperature control unit 30 kW 3. Hopper 4. Control panel 5. Control cabinet 6. Dust filter DN 200/ 100 7.Dust filter DN 150/ 100 8.Technical doc. Message: It was used in a technical plant for wood chip and melamine resin additives.

Condition: used, honing diameter 99999 mm stroke 99999 mm throat 99999 mm Gujdpsv Tqqujfx Aqgjh Used without warranty