Used Meca Plastic Traysealer for sale (6,234)

Condition: new, Year of construction: 2026, Plastic processing plant(s) Available in any desired dimension and for any required capacity. Bedevi I Dwepfx Apbjdc Plastic, Wood, Rubber. Customized/designed to fit your available space. Are you looking for a partner to design, manufacture, install, and also assist in the operation of your installation? Call or email us, and please remember to mention your name, company name, and telephone number.

Year of construction: 1999, condition: excellent (used), working width: 620 mm, machine/vehicle number: SE 01510 A10, Heating Element Welding Machine HP60/40 by BRANSON The drive is hydraulic, supported by positioning and control systems. The machine is equipped with its own vacuum pump. Only a few operating hours (approx. 6,800 hours). Usable heating element area: width 600 mm x depth 400 mm Max. workpiece dimensions: - Max. width: 620 mm - Max. depth: 420 mm - Max. upper height: 350 mm - Max. lower height: 350 mm (Combinations of part heights possible, depending on contour) - Max. processing temperature for contact method: 400°C The modular frame design allows for easy conversion and retrofitting. The side doors and the front door in the welding area can be easily opened (for rapid retooling). The automatic safety lift door ensures a high level of operator safety. The temperature control units on the operator panel have actual/target displays. The control device is a Siemens PLC HMI. The machine is controlled by a Siemens PLC (S7-300 controller). Heating elements are equipped with temperature sensors for temperature regulation and serve as safety cut-offs in case of overheating. The pin systems in the tool mounting surfaces ensure reproducible positioning. Advantages of heating element welding technology: - Reliable welding of workpieces with low or varying wall thicknesses. - Low scrap rate due to dimensionally accurate and repeatable welds. - Precise time, temperature, and force control enable welding of sensitive parts. - Virtually all thermoplastics can be welded with this process. - Different thermoplastic types can be joined (compatibility needs to be verified). Technical data of the machine: - Power supply: 3 x 400 V AC + N + PE - Power: 25 kVA - Rated current: 20 A - Required cable cross-section: 5 cables, each 6 mm² - Required pneumatic connection: 6 bar Bjdpfeykvdlex Apbjdc Machine dimensions: - Machine width: approx. 1.22 m - Machine width with operator panel: approx. 1.8 m - Machine depth: approx. 2.1 m - Machine depth with operator panel: approx. 2.6 m - Machine height: approx. 2.4 m - Machine height with raised safety door: approx. 2.85 m (open door) Machine weight: approx. 2.2 t

Condition: good (used), 58 roll containers, transport trolleys with plastic base – used - : Price per item ex works: only €85 (net) Price for full lot, per item ex works: only €75 (net)! Manufacturer: unknown Model: unknown Year of manufacture: unknown Load capacity: unknown, likely at least 500 kg Dimensions: Width: approx. 75 cm Depth: approx. 70 cm, with handles approx. 77 cm Bsdpsy D Ttrsfx Apbodc Height: approx. 1.80 m Most trolleys feature a height-adjustable intermediate shelf (wire mesh) 2 push handles Three sides enclosed Condition: good Available: immediately Location: Heilbronn

Year of construction: 1995, condition: good (used), 600 mm Rotor width 7,5 kw Motor Bodsfxg Dlopfx Apbodc 650 U/ min

Year of construction: 2000, condition: excellent (used), Available: Immediately Bdjdpsyrfwwofx Apbsc

Year of construction: 2000, condition: excellent (used), machine/vehicle number: 12088 10, Performance: 125 cups per min. (gross) Consists of: -Destacker -Bottom label dispenser -Side label dispenser 1 + 2 and 3 + 4 -Station for finishing the gluing of the side labels (ironing system) -Control station with camera surveillance -Stacker with counter -Outfeed conveyor for finished product Bodjn D Hczepfx Apbedc The machine can also label round cups (160-180°, around). Cup height: 120-130 mm

Condition: used, Year of construction: 1994, Main Group Vilor injection molding machines for manufacturing plastic components; previously used for production of soles and components for footwear manufacturing; option to additionally purchase molds for shoe soles with the machines; machines were operational until the end and have been unused for 4 years; good condition, require refurbishment; Bdjdpfx Apey Egvpsbjc

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 100281518, total height: 2,260 mm, total width: 1,550 mm, total length: 1,685 mm, product height (max.): 310 mm, product width (max.): 150 mm, No reserve price – guaranteed sale to the highest bidder! The original price was over 100,000 EUR! The device is ready for loading & packed for transport! Loading can be handled by the seller. TECHNICAL DETAILS Maximum inspection width: 150 mm Maximum inspection height: 310 mm CONVEYOR SYSTEM Conveyor type: Turn table Speed: 12 – 45 m/min MACHINE DETAILS Bdedpfx Apoy Ath Hebjc X-ray Generator Voltage: 30 – 75 kV Current: 1 – 8 mA Power: max. 300 W Dimensions (L x W x H): 1,685 x 1,550 x 2,260 mm Protection class: IP65 / IP66 Electrical data Power supply: 200 – 240 V Frequency: 50 / 60 Hz EQUIPMENT Rotary table conveyor Hermetic air cooling X-ray inspection system

Condition: new, functionality: fully functional, power: 3.5 kW (4.76 HP), gearing type: automatic, fuel type: electric, color: original, overall weight: 3,500 kg, Year of construction: 2025, operating hours: 1 h, machine/vehicle number: MZatbm01, Equipment: CE marking, This automatic bottle blowing machine that we are introducing to you today, it is a kind of instrumental equipment for plastic bottle production, it can transform plastic granules or pre-made bottle blanks into plastic bottles of various sizes and shapes through an automated process, we can realize any product you make for you. This machine integrates mechanical, electronic and pneumatic technologies and is very intelligent. Whether it is preform loading, heating, stretching, blow molding or finished bottle discharging now only need one of these machines can help you solve, without a lot of human intervention, which not only help you save labor costs, but also help you greatly improve production efficiency and ensure product quality stability. Bdodoxx Ndgepfx Apboc

Condition: used, Year of construction: 2021, functionality: fully functional, clamping force: 2,500 kN, Arburg Allrounder 630A Multi Component Plastics Injection Moulding Machine (2021) Arburg Allrounder 630A 2500-800/400 L2, 2500kN clamp force multi-component plastics injection moulding machine (2021) including 800 horizontal injection unit and 400 vertical injection units Bedpfx Ajygx Uropbodc

Year of construction: 2018, condition: good (used), Manufacturer: Multivac • Models: T300 Traysealer + L310 Conveyor Labeller Bdsdpfx Ajyw Ic Iepboc • Year: 2018 • Configuration: Inline tray sealing and labelling system • Applications: Meat, poultry, fish, ready meals, convenience foods. Multivac T300 Traysealer

Condition: excellent (used), Year of construction: 2019, Plastic raw material hopper Year of manufacture: approx. 2019 Bdjdpfxsy Dgv Tj Apbjc 12 units available

Condition: ready for operation (used), Suitable for: - Food: fluid and viscous products such as sauces, tomato sauces, pâtés, mayonnaise, ketchup, dressing - Chemicals: pesticides, detergents, fertilizers, herbicides, paints, varnishes Bdodpeyxpqcsfx Apboc - Cosmetics: shampoos, creams, shower gels, oils, lotions Piston filler with 4 volumetric filling heads, with upward dispensing Manual cap placement by operator Automatic capping unit Incl. 80-liter heated tank with mixer Up to 2,000 bottles per hour

Condition: new, Year of construction: 2023, functionality: fully functional, The Z-shaped conveyor belt from Trio Technik is for sale and has the following dimensions: Bdjdpowbfxujfx Apbjc Input: 2600 mm Incline: 1700 mm Output: 500 mm Mobile and adjustable, 300 mm Output height: 1450-1700 mm Constant belt speed: 3 m/min Frame height: 200 mm

Condition: good (used), Manufacturer: Mil-tek Model: 205 TS Machine type: Plastic press / Film press Operating pressure: 8 bar Test pressure: 11 bar Material container: 20 l Bdedpfx Apjyx Skrjboc Drive: pneumatic CE marking: present Quantity: 4

Condition: ready for operation (used), Shredder for plastic 45kw power , can chop foil and other plastic into small chunks. The shredder has also soft start box. Bdodsxf Txzopfx Apboc

Condition: new, functionality: fully functional, power: 90 kW (122.37 HP), Year of construction: 2026, Plastic squeeze dryers are a vital part of plastic film washing lines. Washed films retain up to 30% moisture normally after exiting the wash process. High humidity will be affecting the efficiency and production of the following extrusion pelletizing process. Having a plastic squeeze dryer is a must to dehydrate the washed film, increase the density of recycled film and fibre materials, increase the capcity of the following extrusion process and further refine the quality of final plastic pellets. Even the water-washed plastic film processed through a spin-dryer still contains over 10% moisture which would significantly reduce the productivity of the extruder and quality of pellets. The latest development for drying and recycling washed film are plastic film squeeze dryers which could reduce moisture to the minimum and the squeezed material only contains maximum 3%, and more usually 1%, residual moisture. Much cheaper to operate than hot air drying , and better result as the output materials are continuously agglomerated direct from washing lines with +40% fluids to dense free flowing agglomerate. In this form it is not necessary to have cutter compactor extruders, as the materials are so dry and dense they can be fed direct to extruders for pellet production.With over 30 years of producing recycling dryers and extruders GENIUS have sold more than 600 of these driers to the plastics recycling market. ..There are 4 models in the range with production between 250 kgs per hour up to 1200 kgs per hour. Bedpfxewg Sd Uj Apbjdc

Year of construction: 2026, condition: new, functionality: fully functional, Complete plastics recycling line for films and fibre materials from Taiwan leading Plastics Recycling Machinery manufacturer. GENIUS Machinery Co who have more than 30 years of recycling extruder production and experience. Extruder can be fed without size reduction or shredding.. Materials in baled, loose or reel form can be fed. Line can be supplied complete with Belt conveyor, Cutter compactor, Main extruder, Filtration system, (variety of types to suit requirements), Hot pellet die-face cutting device, Centrifugal pellet dryer, Vibrating screener, Storage silo for pellets. Additional ancillary equipment can be supplied . A two stage " Cascade" version is also available for heavily printed films, or very dirty films requiring double filtration. Alternative sizes from 100 kgs per hr up to 1200 kgs per hr can be offered. Full sales and support and training is available in UK and Europe for these extremely modern and economic machines. Bdodpfowg R Rtox Apbjc

Condition: good (used), This filling machine was filling 3 litre tubs of honey. It can be supplied at extra cost with a GlobeTech tub lidding machine which worked in line with it. Bodpfepfdhpjx Apbodc

Condition: excellent (used), Complete line direct from Bankrupt company which was filling capsules and tablets into small tubs. Bottlea are loaded into the line from lazy susan, product is counted and doses into the tub or bottle which is then foil sealed before the screw lid is applied. All machines were bought new in 2015 and appear to be in excellent condition. The counter is a Vitacount 12-1 Bdsdpfew Hz T Eex Apbjc

Condition: good (used), machine/vehicle number: 2004, Renz HB 2000 Binding machine for plastic effect binding; Spiral; Wire O Bdjdpjbq Sykefx Apbjc

Condition: ready for operation (used), Year of construction: 2022, Baling press for waste paper, paper, film, plastic, and other recyclable organic materials. Manufacturer: HSM Model: V-Press 825 plus pro Bdjdjyyy Dpjpfx Apbjc - TCS system (TorsionControlSystem) – platen parallelism control - Automatic start/stop when doors are closed - Display + bale and operating hours counter - Manual tie-off (4 polyester straps) - Sliding door with handwheel locking mechanism Machine dimensions: 1700 x 1250 mm, height: 2370 mm Loading aperture: 1195 x 540 mm Bale weight: up to approx. 280 kg Bale dimensions: approx. 1200 × 780 × 700 mm Throughput: approx. 2–5 bales/h Year of manufacture: 2022 Pressing force: 250 kN Motor power: 4.0 kW Machine weight: 1200 kg

Condition: refurbished (used), Year of construction: 2008, functionality: fully functional, type of input current: three-phase, Satrind 8/25 Twin Shaft Shredder, Bdsdpowxfggsfx Apbjc 18KW Motor (brand new) 30 x 50 mm 1 pick blades. Cutting Chamber 758mm x 700mm machine built onto stand with hydraulic ram that can be operated independently of control panel by a remote control. The machine has been completely refurbished with new blades, resharpened new bearings, seals & safety switches fitted & can be seen working. Ideal for plastic drums, crates, bins. For price contact seller for more information & a video of the machine operating if required.

Year of construction: 2023, operating hours: 5 h, condition: like new (used), functionality: fully functional, cutting length (max.): 105 mm, number of blades: 12, rotor diameter: 300 mm, machine/vehicle number: 20711, GETECHA Granulator / Beside-the-press Grinder (Version A 2.2.2) Application: Professional beside-the-press or small central granulator for recycling sprues and medium-sized plastic parts. Features an elevated frame for easy material discharge into bags or containers. Technical Specifications: Cutting System: Rotor diameter: 300 mm Cutting length: 105 mm Number of rotor knives: 10 (HSS) Number of stator (fixed) knives: 2 Cutting type: Scissor-cut geometry (reduces dust, noise, and energy consumption) Rotation speed: approx. 230 rpm Performance: Throughput: approx. 80 kg/h (depending on material and screen size) Screen: 6 mm (round perforation) Drive & Power: Motor power: 5.5 kW Electrical supply: 3 x 400 V + N, 50 Hz Dimensions & Weight: Chamber inlet opening: 450 x 335 mm Weight: approx. 420 kg Finish: RAL 7035 (Grey) / RAL 5015 (Blue) Configuration Features (Version A 2.2.2): High-Stand Design: Elevated frame construction for ergonomic material discharge. Manual Feed Hopper: Sound-insulated hopper with a large inlet opening (450 x 360 mm). Discharge System: Gravity outlet optimized for regrind bags or collection bins. Key Advantages: Superior Cutting: The 10-blade scissor-cut rotor ensures high-quality regrind with minimal fines. Bdjdpfeyv A A Tsx Apbsc Easy Maintenance: Quick-access design for fast sieve changes and blade adjustments, ideal for frequent material or color changes. Wear Protection: Optional wear-resistant coating available for processing glass-fiber (GF) reinforced materials.

Year of construction: 2023, operating hours: 5 h, condition: like new (used), functionality: fully functional, cutting length (max.): 75 mm, number of blades: 8, rotor diameter: 180 mm, machine/vehicle number: 20710, GETECHA Beside-the-Press Granulator / Plastic Grinder Model: Series A 5.10.1 (Compact Granulator) Application: Immediate recycling of sprues and rejected parts, designed for beside-the-press operation or small central grinding tasks. Technical Specifications: High-performance German-engineered granulator characterized by a robust design and high-precision cutting geometry. Engineered for low-noise and low-dust material processing. Cutting System: Rotor diameter: 180 mm Cutting length (blade length): 75 mm Bjdpeyv Avgofx Apbedc Number of rotor knives: 7 (HSS quality) Number of stator (fixed) knives: 1 Rotor speed: 270 rpm (optimized for material quality and noise reduction) Performance & Sieve: Maximum throughput: Up to 35 kg/h (depending on material type and screen size) Screen: 6 mm standard (round perforation) Drive & Power: Motor power: 2.2 kW Power supply: 3 x 400V +N, 50Hz Inlet Dimensions: Cutting chamber inlet: 285 x 200 mm Manual feed hopper inlet: 337 x 310 mm Configuration & Features (Version A 5.10.1): Hopper: Specially sound-insulated hopper designed for manual feeding. Mobility: Mobile unit mounted on four casters (two equipped with parking brakes). Material Collection: 5-liter regrind bin featuring a left-side suction port (ø 38 mm) for direct connection to a vacuum conveyor/loader. Finish: Original GETECHA industrial coating in RAL 7035 / RAL 7011. Key Advantages: Versatility: Suitable as a dedicated beside-the-press unit or a small central granulator for technical parts. Durability: Equipped with HSS rotor knives for extended service life; optionally available in a reinforced version for glass-fiber (GF) reinforced plastics. Maintenance Friendly: Superior accessibility for rapid cleaning, sieve changes, and knife adjustments, minimizing downtime during material/color changes.