Used Merlo 45.18 Hm for sale (1,755)

Condition: excellent (used), HM window machine 3 x right 4x left top grinding top bottom Lodpfx Amst Hk Atemehh

Condition: new, bore capacity in steel (diameter) 28 mm throat 250 mm bore stroke 130 mm morse taper 3 MK table: 380 x 380 mm Ljdpfx Aoprfbuemmjhh turning speeds 75 - 3200 U/min thread M16 ST60 column diameter 98 mm engine output 1,1 kW dimensions 800 x 500 x 2000 mm weight 210 kg - automatic drill feeds (magnetic clutch) - Height adjustable and angle adjustable table - Movable work table - Integrated cooling system - Powerful engine - 3 hand levers for drilling feed - Safety shield with limit switch - Separate emergency stop - Built-in working lights - Incl. drill chuck 16mm - B16 - Built-in automatic thread cutting.

Condition: new, bore capacity in steel (diameter) 32 mm throat 300 mm bore stroke 160 mm morse taper 4 MK Ljdekahu Rjpfx Ammjhh table: 460 x 460 mm turning speeds 75 - 3200 U/min engine output 1,5 kW column diameter 125 mm thread M16 ST60 feed 0,10/0,18/0,26 mm/U dimensions 800 x 500 x 2200 mm weight 350 kg - automatic drill feeds (magnetic clutch) - Height adjustable and angle adjustable table - Movable work table - Integrated cooling system - Powerful engine - 3 hand levers for drilling feed - Safety shield with limit switch - Separate emergency stop - Built-in working lights - Incl. drill chuck 16mm - B16 - Built-in automatic thread cutting.

Condition: new, bore capacity in steel (diameter) 28 mm throat 250 mm bore stroke 130 mm morse taper 3 MK table: 380 x 380 mm turning speeds 75 - 3000 U/min engine output 1,1 kW column diameter 98 mm Ledpfskahu Ujx Ammohh thread M16 ST60 dimensions 700 x 450 x 1500 mm weight 200 kg - Height adjustable and angle adjustable table - Movable work table - Prepared for cooling system - Powerful engine - 3 hand levers for drilling feed - Safety shield with limit switch - Separate emergency stop - Built-in working lights - Incl. drill chuck 16mm - B16 - Built-in automatic thread cutting.

Condition: ready for operation (used), functionality: fully functional, power: 83 kW (112.85 HP), empty load weight: 12,500 kg, lifting height: 13,000 mm, Year of construction: 1997, operating hours: 4,103 h, number of cylinders: 4, load capacity: 3,000 kg, TECHNICAL DETAILS Lifting and Carrying Lifting height: 13,000 mm Lifting capacity: 3,000 kg MACHINE DETAILS Power: 83 kW Lsdpfxow Elf Aj Ammjhh Fuel type: Diesel Number of cylinders: 4 Drive: Wheel Unladen weight: 12,500 kg Payload: 3,000 kg Permissible total weight: 15,500 kg EQUIPMENT extendable mast

Condition: new, sheet width 2035 mm Lodpfx Aexaaahsmmohh plate thickness 4,5 mm ST thickness at "Niro-steel" 3,0 mm VA bending angle max. 0 - 135 ° daylight opening 100 mm back stop - adjustable 70 - 600 mm total power requirement 5,5 kW weight of the machine ca. 4145 kg dimensions of the machine ca. 3300 x 1550 x 1900 mm Description . - Full hardened structure - BEIJER 7 ”touch screen control * Software with 40 programs and up to 50 steps * 7-inch touchscreen built into the side stand - with manual backgauge, adjustable from behind - Electronic components are quality components from SCHNEIDER - electrical cabinet is integrated in the side stand - Adjustment of the hydraulic pressure to the material thickness - Adjustment of the material thickness on the bending beam is easy with a mm scale - Handle for adjusting the material thickness on the upper beam is hidden in the side stand - Segmented upper cheek

Condition: new, width of the strips 75.0 mm band length 2000 mm band speed 343.0 mm/sek grinding width 530 Plantisch mm table height 475 - 1240 mm total power requirement 3.0 kW weight of the machine ca. 100 kg range L-W-H 500 x 1010 x 1000 mm Description: The belt sander models TAS 75 and 150 are powerful Quality machines, built according to the strictest environmental and Safety regulations. The belt sanders are standard with motor brake, adjustable working height, eye protection, Angle stop and motor protection switch with zero voltage release built. The low-noise machine with CE mark is suitable ideal for grinding all metals. Furnishing: - engine brake - adjustable working height - Plexiglass privacy screen - Angle stop - Motor protection switch with zero voltage release Lhodpfxoxaaq Te Ammjh - self-adjusting belt tension - Powerful engine 3.6 kW - suction nozzle including: integrated suction

Condition: new, sheet width 2540 mm plate thickness 4,5 mm ST thickness at "Niro-steel" 3,0 mm VA bending angle max. 0 - 135 ° daylight opening 100 mm back stop - adjustable 70 - 600 mm total power requirement 5,5 kW weight of the machine ca. 6275 kg dimensions of the machine ca. 3900 x 1700 x 1900 mm Description . - Full hardened structure - BEIJER 7 ”touch screen control * Software with 40 programs and up to 50 steps * 7-inch touchscreen built into the side stand - with manual backgauge, adjustable from behind Lhodpfx Asxaaz Ssmmeh - Electronic components are quality components from SCHNEIDER - electrical cabinet is integrated in the side stand - Adjustment of the hydraulic pressure to the material thickness - Adjustment of the material thickness on the bending beam is easy with a mm scale - Handle for adjusting the material thickness on the upper beam is hidden in the side stand - Segmented upper cheek

Condition: used, Year of construction: 2016, Lifting capacity 5500kg/8.60mtr. 500/70R24 30% 176l/min Hydraulics Air conditioning tinted / windows / Ljdpfx Amjr Ii T Tjmjhh

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: ZF1RT2101C4131380, Year of construction: 2014, operating hours: 11,800 h, load capacity: 4,000 kg, lifting height: 26,000 mm, empty load weight: 16,050 kg, arm reach: 22,900 mm, The telescopic handler underwent maintenance three months ago. During this service, the slew ring bolts were replaced among other tasks, and both the engine and hydraulic oils were serviced. TECHNICAL DATA Max. lifting capacity: 4,000 kg Max. lifting height: 26 m Max. forward reach: 22.9 m Lifting height at max. capacity: 13.6 m Reach at max. capacity: 8.2 m Capacity at max. lifting height: 1,500 kg Capacity at max. reach: 150 kg Slew tower rotation: continuous MACHINE DETAILS Operating weight with forks: 16,050 kg Engine Manufacturer / Cylinders: Iveco / 6 Engine output: 107 kW / 145 hp Fuel tank capacity: 150 l Performance Speed in 1st gear: 16 km/h Speed in 2nd gear: 40 km/h Hydraulic system Load-sensing hydraulic system: 240–108 bar·l/min Hydraulic oil capacity: 160 l Electrical system On-board voltage: 12 V Battery capacity: 160 Ah Drive and steering Transmission: hydrostatic Hydrostatic oil volume: 12 l Drive: permanent all-wheel drive Steering: four-wheel steering Operating hours: 11,800 h EQUIPMENT Hydraulically controlled stabilizers Hydropneumatic suspension Tiltable cab with FOPS certification Electronic joystick control Merlin control system Tac-Lock tool carrier Auxiliary hydraulics for boom Two floating forks (1,200 mm) Permanent all-wheel drive Four-wheel steering Disc brakes on all wheels Automatic parking brake Lsdpfsx Dmgvsx Ammohh Finger-touch directional control Hydrostatic transmission Air suspension seat Note: The winch (€4,000) and work platform (€1,000) can be purchased separately if required. A translated version of the maintenance report is attached as a document.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: ZF1RT2101C4131380, Year of construction: 2014, operating hours: 11,800 h, load capacity: 4,000 kg, lifting height: 26,000 mm, empty load weight: 16,050 kg, arm reach: 22,900 mm, The telescopic handler was serviced three months ago. During this maintenance, among other tasks, the slew ring bolts were replaced, and both machine and hydraulic oils were serviced. TECHNICAL DETAILS Max. lifting capacity: 4,000 kg Max. lifting height: 26 m Max. forward reach: 22.9 m Lifting height at max. capacity: 13.6 m Lhsdpfxoxr Axdj Ammjh Reach at max. capacity: 8.2 m Lifting capacity at max. height: 1,500 kg Lifting capacity at max. outreach: 150 kg Slewing turret rotation: continuous MACHINE DETAILS Operating weight with forks: 16,050 kg Engine Manufacturer / Cylinders: Iveco / 6 Engine power: 107 kW / 145 HP Fuel tank: 150 l Performance Speed 1st gear: 16 km/h Speed 2nd gear: 40 km/h Hydraulic system Load-sensing hydraulic system: 240–108 bar·l/min Hydraulic oil capacity: 160 l Electrics System voltage: 12 V Battery capacity: 160 Ah Drive and steering Transmission: hydrostatic Hydrostatic oil volume: 12 l Drive: permanent four-wheel drive Steering: four-wheel steering Operating hours: 11,800 h EQUIPMENT Hydraulically controlled stabilizers Hydropneumatic suspension Tiltable cab with FOPS approval Electronic joystick control Merlin control system Tac-Lock carriage Auxiliary hydraulics for boom Two floating forks (1,200 mm) Permanent four-wheel drive Four-wheel steering Disc brakes on all wheels Automatic parking brake Finger-touch direction control Hydrostatic transmission Pneumatic seat Note: The winch (€4,000) and the platform (€1,000) can be purchased separately if required.

Condition: ready for operation (used), functionality: limited functionality, power: 103 kW (140.04 HP), lifting power: 4,000 kg/m, lifting height: 7,000 mm, Year of construction: 2012, operating hours: 3,380 h, Equipment: all wheel drive, cabin, onboard computer, standard shovel, Telehandler MERLO P40.7 Turbofarmer Year of manufacture: 2012 According to hour meter: 3,380 hours 4-ton lifting capacity 7-meter lift height 103 kW Ledpfxjyg A Tlo Ammjhh - Original paint - New tires - Including bucket Sales price: €25,900 net Affordable delivery available.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 49076268499286, Year of construction: 2019, operating hours: 2,793 h, load capacity: 4,000 kg, lifting height: 16,000 mm, fork width: 2,600 mm, overall weight: 10,000 kg, total length: 5,000 mm, TECHNICAL DETAILS Load Capacity and Lift Load capacity: 4,000 kg Lifting height: 16,000 mm Maximum height at maximum load capacity: 8.1 m Outreach at maximum load capacity: 4.2 m Load capacity at maximum height: 2,500 kg Load capacity at maximum outreach: 250 kg Power at 2,400 rpm (97/68/CE): 74.9 kW / 102 HP MACHINE DETAILS Lsdpfx Amow Hdxwsmehh Dimensions & Weight Outer fork width: 2,600 mm Chassis length: 5,000 mm Total weight: 10,000 kg Operating hours: 2,793 h

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: 100708, feed length X-axis: 6,300 mm, feed length Y-axis: 250 mm, feed length Z-axis: 200 mm, overall weight: 2,500 kg, saw blade diameter: 700 mm, input voltage: 400 V, saw blade bore: 30 mm, We offer this used H&M HM-Z Automatic Through-Feed Machine, year of manufacture 2008. Machine: HM-Z Type: 4-F Serial number: 100708 Production date: 15-04-2008 Connection voltage: 400 V Power: 19 kW Weight: 2500 kg Air pressure: 6-10 bar Maximum saw blade diameter: 700 mm Ledpfsy H Dbljx Ammjhh Minimum saw blade diameter: 600 mm Saw shaft hole diameter: 30 mm Maximum milling cutter diameter: 400 mm Minimum milling cutter diameter: 300 mm Cutter shaft hole diameter: 60 mm Completely overhauled in 2024 by Diba Machinehandel and has hardly been used since, due to an additional business activity. Must go due to lack of space. Infeed section adapted to a working length of 7 meters during the 2024 overhaul. H&M crosscut saw: approx. 19.5 x 4 meters Price is exclusive of dismantling, transport, assembly and accessories, valves, pipes, extraction hoses, and power cables. If you have any questions or would like more information, please feel free to send us a message or call us.

Condition: used, Year of construction: 1996, Used machine Year of manufacture: 1996 with heated infeed rail Gluing station with electronic temperature control and forward/reverse function - Cutting unit Lhsdpjkwg Tbjfx Ammsh - Milling unit - Profiling blade - Cleaning station - Edge thickness 0.4 - 5 mm - Board thickness up to 50 mm - Part length min. 150 mm - Part width min. 60 mm - Workpiece thickness 8 - 50 mm - Feed rate 12 m/min L x W x H approx. 4000 x 1260 x 1600 mm (Width can be reduced to 800 mm for shipping by removing the extendable support) Availability: by arrangement Location: Hochheim

Year of construction: 2018, condition: reconditioned (used), functionality: fully functional, machine/vehicle number: M iClean HM mit GIO, Our 10 Meiko pot washers with the model designation DV 80.2 PW and built in 2015 2016 are for sale. Condition good, ran partly with soft water. These machines are former leasing devices. With 6 months spare parts guarantee. Preventive maintenance was always carried out with the replacement of some wearing parts. Inspection and test run on site possible and desired. Technical specifications: Performance up to 60/40/17 baskets (corresponds to approx. 1080/720/306 plates or e.g. 2160/1440/612 glasses) per hour Program run times: 60/90/210 seconds Basket dimensions in mm: 500 x 500 Insertion height: 440 mm Tank capacity: 22 l Water consumption per basket: 2.6 l Tank heater: 1.3 kW Boiler: 7.5 kW (cold water) Boiler: 9.0 kW (hot water) Material: stainless steel Connected load: 400 V / 11.2 kW (cold), 9.7 (warm) Dimensions: W 635 x D 750 x H 1470/2050 mm Electrical installation: Electrical connection: three-phase current 3 NPE, 400 V, 50 Hz. Lhodopy Dxropfx Ammoh The circuit corresponds to the regulations of the VDE Water installation: The dishwashers can be connected to the fresh water network without the interposition of safety fittings. Minimum flow pressure 0.6 bar, maximum pressure 5 bar. The installation regulation EN 1717 must be observed. expiry ¾ ̋. On-site wall drain max. 700 mm high. Length of the connection lines approx. 1.8 m from the dishwasher. Collection of the machines desired. Dispatch by freight forwarder at cost assumption possible.

Condition: used, mileage: 520,000 km, power: 256 kW (348.06 HP), first registration: 06/1977, fuel type: diesel, number of seats: 32, gearing type: mechanical, color: beige, Year of construction: 1977, Equipment: parking heater, soot filter, * Setra 212 HM with 32 seats - 6-speed manual transmission - Toilet - Kitchen - Round seating area * Diesel - 12,675 cm³ - 256 kW - 350 hp - Euro 0 - No emissions sticker required - 8 cylinders - Air suspension * 32 seats + 1 driver - Auxiliary heater - Radio - Simple door at the front and rear Ljdpfx Aoyy T N Semmehh * Vehicle dimensions: Length: 10,370 mm x Width: 2,500 mm x Height: 3,090 mm * German vehicle - German vehicle registration document - Sold on behalf of a customer * Errors/printing errors and prior sale reserved - immediately available * Please schedule an appointment for viewing and test drive * Contact: Andreas Vogel * ATTENTION - Vehicles are stored off-site - Please inquire about the exact location - ATTENTION

Condition: good (used), Year of construction: 1995, Semi-automatic edge decoating system, Working height: 900 mm. Width: 1400 mm, Lhodpfxoridqxe Ammeh depth: 1200 mm, Max. Height: 1490 mm (up to operating terminal), Weight: 180 kg.

Year of construction: 2020, condition: excellent (used), functionality: fully functional, Graco Tank-Free Hotmelt Delivery System Invisipac HM 25 Ledpfx Aswigbmsmmohh Year 2020 For delivering and dispensing hot melt adhesive pellets. For professional use only. 1200 psi (8.3 MPa, 83 bar) Maximum Working Pressure 400°F (204°C) Maximum Fluid Operating Temperature 100 psi (0.7 MPa, 7 bar) Maximum Air Inlet Pressure Proven adhesive savings, unsurpassed reliability. Unlike conventional tanks and many "tankless" systems, the InvisiPac system's patented Melt-on-Demand technology ensures a constant flow of adhesive that melts quickly and is dispensed instantly. You save adhesive and costs due to unplanned downtime for maintenance. With the InvisiPac system's robust reporting capabilities, you have the data you need to make smart decisions for your line that can increase efficiency, reduce costs, minimize downtime, and improve productivity. Better performance: No clogged nozzles; No carbon-filled containers; Fast startup in as little as 10 minutes; Improved operator safety; High performance with a sustainable component; Greater cost savings; Consistent adhesive viscosity; No material damage; Little to no waste; Better dispensing control; Use the adhesive of your choice

Condition: excellent (used), Year of construction: 2003, operating hours: 67,092 h, BATTENFELD HM 10000-9200 Manufacturer: BATTENFELD Model: HM 10000-9200 Control system: UNILOG B4 Year of manufacture: 2003 Operating hours: 67,092 h Technical data – Clamping unit Clamping force: 10,000 kN Tie bar spacing (h x v): 1120 x 1400 mm Platen size (h x v): 1960 x 1690 mm Minimum mold height: 550 mm Maximum mold height: 1,020 mm Maximum daylight: 2,120 mm Opening stroke: 1,100 mm Ejector stroke: 300 mm Lhjdpfx Amox Up Rhsmoh Ejector force: 118 kN Movable platen centering diameter: 250 mm Fixed platen centering diameter: 315 mm Technical data – Injection unit Screw diameter: 120 mm Shot volume: 5,655 cm³ Injection pressure: 1,632 bar Screw length: 22 L/D Screw stroke: 500 mm Screw speed: 130 min⁻¹ Screw torque: 11,370 Nm Plasticizing rate: 144 g/s PS Free discharge plasticizing rate: 1,144 g/s PS Number of heating zones: 8 Nozzle stroke: 700 mm Dimensions & Weight Machine dimensions (L x W x H): 11.6 m x 2.9 m x 2.5 m Total weight: 76,500 kg Equipment Display language: German CompactFlash drive 4x hydraulic core pulls Leveling elements EUROMAP 12 interface Interface for temperature control unit Enlarged oil cooler 16x mold heating circuits

Year of construction: 2022, condition: ready for operation (used), overall weight: 8,500 kg, total height: 1,950 mm, This Metallkraft RBM 4 HMS Pro 3050-150 plate rolling machine was manufactured in 2022. It features a robust welded construction, induction-hardened rollers, and a hydraulic drive for the upper roller. The machine includes three digital displays for precise roller adjustments and a hydraulic folding plate for easy workpiece removal. Ideal for heavy industrial use with options for conical bending. Contact us for more information about this machine. Additional equipment • Teach-In NC control for automated bending processes (optional) • Mechanical auxiliary arm for handling heavy workpieces (optional) • Hydraulic side supports for stabilizing long sheets (optional) • Infinitely adjustable bending speed (optional) Machine Benefits Qualitative Machine Benefits • Three digital displays for precise adjustment of the roller position • Hydraulic folding plate for easy removal of the finished workpiece • Movable control panel for comfortable operation • Conical bending option • Hydraulic balancing system for the rollers to ensure parallelism • Safety emergency stop system Technical Machine Benefits • Maximum working width: 3050 mm • Upper roller diameter: 300 mm • Rolling speed: 1. 5 – 5 m/min • Minimum bending diameter: 450 / 1500 mm • For steel with 400 n/mm² strength, the machine allows pre-bending of 10/12 mm, full bending of 12/15 mm, and conical bending of 6/7. 5 mm. • For stainless steel (va), the machine allows full bending of 9/11. 2 mm and conical bending of 4. 5/5. 6 mm. • For aluminum, the machine allows full bending of 14. 4/18 mm and conical bending of 7. 2/9 mm. • Heavy, robust welded construction for industrial use • Induction-hardened rollers, suitable for bending stainless steel • Hydraulic drive for the upper roller with planetary gear Extra Information Technical Specifications Maximum working width: 3050 mm Upper roller diameter: 300 mm Rolling speed: 1.5 – 5 m/min Drive motor power: 11 kW Minimum bending diameter: 450 / 1500 mm Bending Capacities Steel (400 N/mm²): Pre-bending: 10 / 12 mm Lodpfxex D Sule Ammshh Full bending: 12 / 15 mm Conical bending: 6 / 7.5 mm Stainless steel (VA): Full bending: 9 / 11.2 mm Conical bending: 4.5 / 5.6 mm Aluminum: Full bending: 14.4 / 18 mm Conical bending: 7.2 / 9 mm Dimensions Machine Depth 5400 mm

Condition: excellent (used), functionality: unexamined, operating hours: 8 h, power: 40 kW (54.38 HP), input voltage: 380 V, input frequency: 50 Hz, Tunnel microwave dryer with conveyor belt for continuous drying. Adjustable microwave power and belt speed, PLC control with separate control cabinet. Stainless steel construction and food-grade PTFE belt. Machine available in Switzerland (Martigny). Water-cooling circuit included. Ventilation system to extract water vapor from the chamber is not included. Technical specifications: General data • Model: HM-40KW-A • Quantity: 1 set • Frequency: 2450 ± 50 MHz • Microwave feed: top feed • Heating chambers: 4 Power / electricity • Microwave power: 40 kW (adjustable) • Rated input power: 50 kW • Power supply: 380 V, three-phase, 50 Hz Conveyor / belt • Belt width: 600 mm • Belt speed: 0.5 – 7 m/min • Conveyor motor: 0.75 kW, frequency inverter • Belt: Food-grade PTFE (high temperature, fire-resistant, anti-corrosion) • Conveyor height: 900 – 1500 mm • Leak-proof opening (microwave suppressor): H 50 mm; L 600 mm Cooling • Magnetron cooling: by water, circuit included Lhjdpfx Amszc Hvpjmoh Dimensions / construction • Machine dimensions (L × W × H): 5500 × 1000 × 2000 mm • Microwave active area: 4000 × 600 × 1750 mm • Construction: SS304, 1.5 mm thick • Observation windows Control / safety • Control: PLC control screen + separate cabinet • Temperature measurement: Non-contact IR (range indicated 0–350°C, up to 0–500°C) • Safety: Automatic shutdown upon door opening • Microwave leakage standard: GB 5959.6-2008 Conditions • Availability: Immediate • Location: Martigny, Switzerland (currently in the factory) • Condition: To be tested • Inspection: Upon request Transportation costs are the responsibility of the buyer.

Condition: good (used), Year of construction: 1978, WACO HM200 UNIVERSAL, Planer-Moulder 10 spindle machine Year 9/1979 S/N 31469.708 Hydraulic feeded powerful spindle moulder. Feeding speed 0-50m/ min counter bearings on all horizontal spindles. 1. / 5. / 8./10. spindles equipped with jointer Infeeding table 200 cm Lhedpfxoiz Tzxe Ammjh Technical describtion: working capacity 200x100mm (width x hight) Spindle configuration: 1. Spindle Bottom 7,5Kw (10Hp) 2. Spindle Right 7,5kw (10HP) 3. Spindle Left kw (15HP) 4. Spindle Top, 7,5kW 5. Spindle Top, 7,5 kW 6. Spindle Right 7,5kw (10HP) 7. Spindle Left kw (15HP) 8. Spindle Top, 7,5 kW 9. Spindel Bottom, 7,5 kW 10.Spindle Bottom 10 kW Bottom spindle max tool diameter 160mm, work length 210mm Side spindles (right / left) max tool diameter 200mm, work length 110mm Top spindles max tool diameter 225mm, work length 210mm Spindle diameter 45mm Pneumatic pressure rolls ?? L x W x H = Weight 10 t

Condition: excellent (used), Year of construction: 2012, Battenfeld HM 300/1330 injection molding machine Basic information Manufacturer: Battenfeld Model: HM 300/1330 Year of manufacture: 2012 Operating hours: 65,085 h Category: Hydraulic injection molding machine Compatibility: can be equipped with an ESS (Energy Saving Systems) Clamping unit Clamping force: 3,000 kN (300 tons) Mold mounting plate dimensions (horizontal × vertical): 1020 × 1030 mm Distance between tie bars (horizontal × vertical): 710 × 630 mm Lhodpfx Aozc Hl Rsmmsh Minimum mold height: 375 mm Maximum mold opening: 1175 mm Injection unit Screw diameter: 60 mm Injection volume: 913 cm³ Injection shot weight (PS): 840 g Maximum injection pressure: 2040 bar Dimensions and weight

Condition: excellent (used), Year of construction: 2005, Battenfeld HM 270/1330 Injection Molding Machine Lhsdpezc Efcofx Ammeh Basic Information Manufacturer: Battenfeld Model: HM 270/1330 Year of Manufacture: 2005 Category: Hydraulic Injection Molding Machine Clamping Unit Clamping Force: 2,700 kN (270 tons) Mold Platen Dimensions (horizontal × vertical): 1030 × 1020 mm Distance Between Columns (horizontal × vertical): 710 × 630 mm Minimum Mold Height: 350 mm Maximum Mold Opening: 1150 mm Injection Unit Screw Diameter: 55 mm Injection Volume: 650 cm³ Injection Shot Weight: 565 g Maximum Injection Pressure: 2040 bar Dimensions and Weight Net weight of the machine, including the control cabinet: approximately 12 tons