Used Merlo Accessories for sale (23,184)

Condition: used, Year of construction: 2025, operating hours: 122 h, Operating hours: 122, First registration: 08.10.2025 Maximum lifting capacity: 3,000 kg Maximum lifting height: 6,700 mm Maximum outreach: 3,800 mm Length to attachment carrier: 4,510 mm Width: 2,000 mm Height: 2,120 mm Total weight with forks: 6,620 kg Total weight without forks: 6,450 kg Engine: 4-cylinder Deutz TCD 2.9 2.9 L displacement, water-cooled Power: 75 kW (101 hp) 2,600 rpm Stage V Diesel particulate filter, oxidation catalyst, and SCR catalyst with AdBlue injection (DPF + DOC + SCR) Hydrostatic drive Pump: electronically controlled with variable output Motor: variable displacement motor EPD PLUS including optional automatic rpm increase Mineral hydraulic oil HVI 46 Transmission: 2-speed Electrohydraulic control Vmax = 1st / 2nd gear = 16/20 km/h, optional 40 km/h Cab: Fully enclosed cabin, split door 360-degree all-round visibility GRAMMER air-suspended seat with safety lap belt ROPS/FOPS certified Heating Front, roof, and rear wipers Sunblind 4x1 joystick, electronic with capacitive release and travel direction switch Telescopic boom: 2-section with electronic end position cushioning (Soft Stop) Attachment carrier: Quick-change system type “ZM2” hydraulically controlled from the cab Steering: Hydraulic steering 3 steering modes: four-wheel, front-wheel, crab steering Drive: Permanent all-wheel drive Axles: Front axle rigid Rear axle oscillating Braking system: Servo-assisted disc brakes on all four wheels Automatic parking brake when engine is off Hydraulic system: Load-sensing pump with variable output Total flow: 100 l/min Working pressure: 250 bar Flow-sharing control block Electrics: 12V battery with 100 Ah Alternator 120A Stabilization control: Simplified Merlo ASCS system (ASCS-light) with fully electronic stability control, audiovisual signal, attachment recognition and overload cut-off Tyres: 400/70-20, agricultural tread Lajdpfxeyv S Ufj Acfsf Standard equipment: Power brake Hydraulic oil cooler Rear plate for mounting a trailer hitch Radio preparation Work lights on cabin (2 front, 2 rear) V2001 preparation for additional function at boom head 2 hydraulic connections at boom head Load guard on attachment carrier Road lighting Automatic battery disconnect switch Electrical connection cable inside boom Audible reverse warning Lift cylinder support for safety 1 Operating manual 1 Engine manual Special equipment: EU approval as tractor/towing vehicle 40 km/h incl. height-adjustable, self-locking trailer hitch, 30/32 mm pins, trailer lighting connection Air conditioning LED work lights on cabin (2 front, 2 rear) Boom suspension (B.S.S.) Location: 54595 Prüm

Condition: used, machine/vehicle number: 9486, Year of construction: 2013, operating hours: 3,694 h, load capacity: 3,800 kg, lifting height: 13,000 mm, overall weight: 9,100 kg, enginetype: Diesel, manufacturer: Merlo Lodpfx Ajzca Ewocfeaf

Condition: good (used), machine/vehicle number: 5169190, Year of construction: 2016, operating hours: 1,287 h, load capacity: 2,500 kg, lifting height: 6,000 mm, construction height: 1,930 mm, overall weight: 5,200 kg, enginetype: Diesel, manufacturer: Merlo Ledpfx Acezca Ekefoaf

Condition: used, power: 103 kW (140.04 HP), fuel type: diesel, color: green, tire size: 17,5-25, Year of construction: 2010, operating hours: 11,738 h, machine/vehicle number: 384, Equipment: ABS, additional headlights, air conditioning, all wheel drive, cabin, Deutz engine Quick change device Total weight 11,000 kg max. load capacity 5,500 kg Max. lifting height 8,600 mm max. outreach 4,600 mm Errors excepted Lsdpfx Aeqt Dwfjcfeaf

Condition: used, functionality: fully functional, Year of construction: 2024, operating hours: 1,907 h, load capacity: 3,300 kg, lifting height: 6,600 mm, fuel type: diesel, mast type: telescopic, construction height: 2,120 mm, empty load weight: 6,700 kg, total length: 4,310 mm, drive type: Diesel, construction width: 2,100 mm, Rigid telescopic forklift Mast type: Telescopic Technical condition: New Lasdpoy Scnnefx Acfsf Front tires size: 400/70-20 Rear tires size: 400/70-20

Condition: used, Year of construction: 2016, Lifting capacity 5500kg/8.60mtr. 500/70R24 30% 176l/min Hydraulics Air conditioning tinted / windows / Lsdpfx Acer Ii T Tjfoaf

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: ZF1RT2101C4131380, Year of construction: 2014, operating hours: 11,800 h, load capacity: 4,000 kg, lifting height: 26,000 mm, empty load weight: 16,050 kg, arm reach: 22,900 mm, The telescopic handler underwent maintenance three months ago. During this service, the slew ring bolts were replaced among other tasks, and both the engine and hydraulic oils were serviced. TECHNICAL DATA Max. lifting capacity: 4,000 kg Max. lifting height: 26 m Max. forward reach: 22.9 m Lifting height at max. capacity: 13.6 m Reach at max. capacity: 8.2 m Ledpfx Acex Dmgvefoaf Capacity at max. lifting height: 1,500 kg Capacity at max. reach: 150 kg Slew tower rotation: continuous MACHINE DETAILS Operating weight with forks: 16,050 kg Engine Manufacturer / Cylinders: Iveco / 6 Engine output: 107 kW / 145 hp Fuel tank capacity: 150 l Performance Speed in 1st gear: 16 km/h Speed in 2nd gear: 40 km/h Hydraulic system Load-sensing hydraulic system: 240–108 bar·l/min Hydraulic oil capacity: 160 l Electrical system On-board voltage: 12 V Battery capacity: 160 Ah Drive and steering Transmission: hydrostatic Hydrostatic oil volume: 12 l Drive: permanent all-wheel drive Steering: four-wheel steering Operating hours: 11,800 h EQUIPMENT Hydraulically controlled stabilizers Hydropneumatic suspension Tiltable cab with FOPS certification Electronic joystick control Merlin control system Tac-Lock tool carrier Auxiliary hydraulics for boom Two floating forks (1,200 mm) Permanent all-wheel drive Four-wheel steering Disc brakes on all wheels Automatic parking brake Finger-touch directional control Hydrostatic transmission Air suspension seat Note: The winch (€4,000) and work platform (€1,000) can be purchased separately if required. A translated version of the maintenance report is attached as a document.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: ZF1RT2101C4131380, Year of construction: 2014, operating hours: 11,800 h, load capacity: 4,000 kg, lifting height: 26,000 mm, empty load weight: 16,050 kg, arm reach: 22,900 mm, The telescopic handler was serviced three months ago. During this maintenance, among other tasks, the slew ring bolts were replaced, and both machine and hydraulic oils were serviced. TECHNICAL DETAILS Max. lifting capacity: 4,000 kg Max. lifting height: 26 m Max. forward reach: 22.9 m Lifting height at max. capacity: 13.6 m Reach at max. capacity: 8.2 m Lifting capacity at max. height: 1,500 kg Lifting capacity at max. outreach: 150 kg Slewing turret rotation: continuous MACHINE DETAILS Operating weight with forks: 16,050 kg Engine Manufacturer / Cylinders: Iveco / 6 Engine power: 107 kW / 145 HP Fuel tank: 150 l Performance Speed 1st gear: 16 km/h Speed 2nd gear: 40 km/h Hydraulic system Load-sensing hydraulic system: 240–108 bar·l/min Hydraulic oil capacity: 160 l Electrics System voltage: 12 V Battery capacity: 160 Ah Drive and steering Transmission: hydrostatic Lasdpfx Aoxr Axdjcfsf Hydrostatic oil volume: 12 l Drive: permanent four-wheel drive Steering: four-wheel steering Operating hours: 11,800 h EQUIPMENT Hydraulically controlled stabilizers Hydropneumatic suspension Tiltable cab with FOPS approval Electronic joystick control Merlin control system Tac-Lock carriage Auxiliary hydraulics for boom Two floating forks (1,200 mm) Permanent four-wheel drive Four-wheel steering Disc brakes on all wheels Automatic parking brake Finger-touch direction control Hydrostatic transmission Pneumatic seat Note: The winch (€4,000) and the platform (€1,000) can be purchased separately if required.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: C9000052, Year of construction: 2019, operating hours: 1,483 h, lifting height: 12,000 mm, fuel type: diesel, fork length: 1,200 mm, Equipment: UVV, documentation/manual, The current UVV inspection report is attached! UVV valid until 10/2026! Maintenance and service have always been carried out at the manufacturer's specified intervals! TECHNICAL DETAILS Load capacity: 3.8 t Lift height: 12,000 mm Fork length: 1,200 mm MACHINE DETAILS Drive: Diesel Ljdpfjywu Tgsx Acfoaf Tyre condition Front right tyre condition: approx. 80% Front left tyre condition: approx. 80% Rear right tyre condition: approx. 80% Rear left tyre condition: approx. 80% Operating hours: 1,483 h EQUIPMENT UVV inspection valid until 10/2026 Fork carriage Seat cover Spare key Documents

Condition: ready for operation (used), functionality: limited functionality, power: 103 kW (140.04 HP), lifting power: 4,000 kg/m, lifting height: 7,000 mm, Year of construction: 2012, operating hours: 3,380 h, Equipment: all wheel drive, cabin, onboard computer, standard shovel, Telehandler MERLO P40.7 Turbofarmer Year of manufacture: 2012 According to hour meter: 3,380 hours 4-ton lifting capacity Laedpfjyg A Tljx Acfjf 7-meter lift height 103 kW - Original paint - New tires - Including bucket Sales price: €25,900 net Affordable delivery available.

Condition: used, Article: clamping collets Laedpfx Aen H Nzbscfjf Manufacturer: Different For multi spindle automatic lathes, used and new Please, contact us for getting more information and pictures on mail(at) or *

Condition: used, Article: draw bar Manufacturer: Schütte For multi spindle automatic lathes of different sizes Please, contact us for getting more information and pictures on mail(at) or * Lsdpfsyn Af Dsx Acfeaf

Condition: used, Article: feed lever Manufacturer: Schütte For multi spindle automatic lathes of different sizes Please, contact us for getting more information and pictures on mail(at) or Lodpfx Aeynz Ukscfeaf *

Condition: used, Article: profile turning trip dog Manufacturer: Schütte Many different sizes for Schütte profile turning attachment 68AE Please, contact us for getting more information and pictures on mail(at) or Ledjyn Aa Uspfx Acfjaf *

Condition: used, polygon turning unit for Schutte AG20, used 1 polygon turning unit type Saco SC 15.22.001-Nr.3 1 cardan shaft type Saco SC 15.52.188.00 1 gear box SC 15.22.001-Nr. 3 Laodpfx Acsyn Dkuofef Please, contact us for getting more informations and pictures on or *

Condition: used, Article: clamping head Manufacturer: Different For multi spindle automatic lathes, used and new Please, contact us for getting more information and pictures on mail(at) or Lsdpen H Nzujfx Acfeaf *

Condition: used, Article: push rod Manufacturer: Schütte For multi spindle automatic lathes of different sizes Please, contact us for getting more information and pictures on mail(at) or * Lajdpfxsyn Aauo Acfof

Condition: used, Article: quadrant lever Manufacturer: Schütte For multi spindle automatic lathes of different sizes Please, contact us for getting more information and pictures on mail(at) or * Lajdpfjyn Aazsx Acfsf

Condition: used, Fette thread rolling unit T42, cross Please, contact us for getting more informations and pictures on or Laedpfsft Tk Hox Acfef *

Condition: used, Article: gears Manufacturer: Schütte For Schütte multi spindle automatic lathes F- and G-Type of different sizes Please, contact us for getting more information and pictures on mail(at) or Laedjn H Nzmspfx Acfjf *

Condition: used, Article: push lever Manufacturer: Schütte For multi spindle automatic lathes of different sizes Please, contact us for getting more information and pictures on mail(at) or * Lajdpfsynz Udex Acfjf

Condition: used, pickoff with shaft for Schutte multi spindle automatic lathe SF67, used pickoff C26GF pickoff shaft C26GF9S1 gear WG-67S Please, contact us for getting more information and pictures on mail(at) or Ljdpfx Ajyn Aa Ijcfsaf *

Condition: used, Article: cam Manufacturer: Schütte Lajdpfx Acen H Nzfsfof For Schütte multi spindle automatic lathes F- and G-Type of different sizes Please, contact us for getting more information and pictures on mail(at) or *

Condition: used, functionality: fully functional, Year of construction: 2014, empty load weight: 512 kg, total length: 4,020 mm, fork length: 1,200 mm, load capacity: 3,485 kg, Accessories Load center: 600 Fork width: 150 mm Fork thickness: 50 mm ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: None Lsdpfozvrucex Acfjaf Condition: Ready for use and fully functional Technical condition: very good Description: 2x forks: 150 x 50 x 1,200 mm 2x forks: 150 x 50 x 1,200 mm

Condition: like new (used), amount 1 Palette Milling, drilling, and cutting tools for CNC and conventional machine tools. These include: -> Face mills — large milling heads with multiple indexable inserts, ideal for facing large surfaces. -> Cylindrical end mills — cylindrical mills with face and peripheral teeth, often used for grooves and contours. -> Disc cutters — thin, round cutters for cutting or for deep grooves. -> Drills — various twist drills for metalworking. -> Gear hobs — gear-like cutters for producing gear teeth. -> Tool shanks (SK/ISO/BT) — the tapered tool holders on which the cutters are mounted. -> Collet chucks — holders for smaller tools, Laodpfjzhcf Njx Acfjf such as drill bits or end mills. -> End mills — smaller cutters with multiple cutting edges for contouring, pocketing, and 3D machining. -> Indexable-insert cutters — cutters with replaceable carbide inserts. -> Circular saw blades — round saw blades for cutting or slotting. -> Adapters and spacers — for adapting different tool holders. Complete package price