Used Morbidelli Cnc Working Center for sale (54,331)

Condition: used, Year of construction: 2000, max swing 700 mm, X/Y 255/520 mm, 12-position upper tool turret and 8-position lower tool turret with driven tools, measuring head, tailstock, CNC SIEMENS SINUMERIK 840D, 400V 50Hz 45kW, weight 15 t Bjdeym Sx Depfx Ad Aswl

Condition: used, Year of construction: 2003, max. Spindle speed 5000 U/min. travel -x axis 160 mm travel -z axis 450 mm numbers of turret head positions 12 tool taper VDI 30 Control Heidenhain iT Plus Dimensions (L x W x H) 4,5 x 2,5 x 2,5 m weight of the machine 3700 kg CNC Turning- and Milling Center | DMG GILDEMEISTER - CTX 310 Additional equipment: - C-Axis The machine is in good condition. Please refer to further technical details in the attachement of the offer. Bsdpfxev Ehawo Ad Aswl - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: CTX310 | CTX-310

Condition: ready for operation (used), Year of construction: 2002, A Fehlmann CNC machining center that was used in the ceramics industry is available. Travel X/Y/Z: 700mm/420mm/610mm, speed: 20000rpm, tool holder: SK30, tool positions: 48, spindle power: 9kW, torque: 70Nm, table dimensions X/Y: 1260mm/490mm, weight: approx. 5200kg, control: Heidenhain TNC 430M. The C key has a fault on the ATS swivel apparatus regarding the amplitude. The ball screws of the X and Y axes were recently replaced. Without extraction system. Documentation available. An on-site inspection is possible. Bodpfx Adoy H I Euo Ajwl

Condition: ready for operation (used), Year of construction: 1996, Control: Heidenhain MillPlus, NC software: 400.00, connected load: 29kVA, length: 3100mm, width: 2400mm, height: 2450mm, weight: 5.7t. Operating hours: 50,213h, spindle hours: 9,297h. Machine is not functional, the control does not start up, cause is a defective system rack and two defective IOB80 boards. An on-site inspection is possible. Bsdpfey H I Hfox Ad Aswl

Condition: ready for operation (used), Year of construction: 1998, A CNC vertical machining center Takumi is available. Travel X/Y/Z: 1800mm/850mm/750mm, spindle nose to table distance range: 200mm-950mm, spindle center to column distance: 920mm, table dimensions X/Y: 2000mm/800mm, max. table load: 2200kg, tool holder: NT50, speed: 6000rpm, feed rate: 5m/min, rapid traverse: 12m/min. Machine dimensions X/Y/Z: approx. 5700mm/3850mm/3350mm, weight: approx. 16500kg, control: Heidenhain, operating hours: approx. 50000h, spindle hours: approx. 25000h. Documentation available. An on-site inspection is possible. Bwedpfey H I H Eox Ad Aol

Year of construction: 2015, condition: ready for operation (used), A double-turret and double-spindle turning center Biglia including peripherals is available. Spindle power: 11kW/11kW, speed: 7000rpm, bar capacity: 36mm-37.5mm, max. turning diameter: 100mm, max. turning length: 140mm, tool stations: 2×12, Y-axis travel: +/-25mm, X/Z-axis travel: 85mm/300mm, rapid traverse: 15m/min, machine dimensions X/Y/Z: approx. 3700mm/1450mm/1900mm, weight: approx. 5000kg, control: Mitsubishi M730 with editor, power-on hours: approx. 47000h. Including FMB turbo 3-36 bar loader, Knoll KF10 coolant system, 700l tank, air cleaning unit and an extensive package of collets and tools. Documentation available. An on-site inspection is possible. Expected to be available starting October 2026. Bjdpfey H I E Uex Ad Aswl

Condition: ready for operation (used), Year of construction: 1991, A CNC vertical machining center Emco is available. Travel X/Y/Z: 420mm/330mm/400mm, table dimensions X/Y: 650mm/320mm, max. table load: 150kg, tool positions: 12, tool holder: SK40, speed: 4500rpm, rapid traverse: 12m/min. Machine dimensions X/Y/Z: approx. 2400mm/2300mm/2450mm, weight: approx. 2750kg, control: Emcotronic TM02. An on-site inspection is possible. Bsdpfx Aey H I H Sod Aowl

Condition: good (used), Year of construction: 2008, Ref. -No.: 10626 Manufacturer: DMG Type: DMU 210 P Year of construction: 2008 Type of control: CNC-Steuerung Control: Heidenhain ITCN 530 Storage location: Halberstadt Country of origin: Germany X-Travel: 1800 mm Y-Travel: 2100 mm Z-Travel: 1250 mm Bwodpfoy H Er Esx Ad Ajl B-Axis: -30 / +180 ° C-Axis: 360 ° Table Load: 8000 kg Clamping Area: 1.700 mm Tool Taper: HSK - 100 Spindle Speed: 10.000 RPM Max. Torque: 288 Nm No. Of Working Stations: 60 coolant reservoir: 40 bar L. Further information: - The DMG DMU 210 P 5-axis machining center is suitable for high-precision machining of large, heavy workpieces. - Direct position measuring systems in all axes - Heidenhain TS workpiece measurement - Electronic handwheel setup mode - Chip conveyor chip disposal - Double gripper tool changer - Motor spindle technology The machine can be viewed under power by arrangement.

Condition: good (used), Year of construction: 2011, Ref. -No.: 10615 Manufacturer: DMG Type: DMU 210 P Year of construction: 2011 Type of control: CNC-Steuerung Control: Heidenhain ITNC 530 Storage location: Halberstadt Country of origin: Germany Machine-No.: 128/XXXX X-Travel: 1800 mm Y-Travel: 2100 mm Z-Travel: 1250 mm Swivel range: -30 / +180 ° Table Load: 10000 kg Max. rotary table diameter: 1700 O Table speed range: 12 min/-1 Tool Taper: HSK 63 Numbers Of Tools In Magazin: 60 Spindle Turning Speed - Stepless: 24.000 RPM Weight Of The Machine Ca.: 41 t Motor spindle: 24000 RPM Feed drive A, C: 30 min/-1 horizontal milling head: 130-1.380 mm Bwedpfx Adoy H Epwo Ael vertical milling head: 230-1.480 mm Further information: The machine can be viewed while powered up.

Condition: good (used), Year of construction: 2009, Ref. -No.: 10026 Manufacturer: SCHIESS Type: VMG4 MA90 Year of construction: 2009 Bodpey H Ebtofx Ad Ajwl Type of control: CNC-Steuerung Control: Siemens Sinumerik 840 D Storage location: Halberstadt Country of origin: Deutschland Turning Diameter: 5000 mm Turning Diameter Over Bed: 4000 mm Spindle Speeds: 0 - 120 RPM Clamping Diameter: 4000 mm Cross Travel: 420 x 340 mm Max workpiece height: 3000 mm Main Drive: 52 kW Max. Tension: 120000 N Max. Payload: 50 t Power Capacity - Table: 110 kW Max torque faceplate: 100 kNm Further information: Automatic tool changer with 80 positions (AAC) Automatic attachment changer for 6 milling heads Live spindle C-axis table Travel of the Y-axis gantry columns Drilling and milling head (master head principle) Straight drilling and milling head GB-1B Renishaw RBP 60 touch probe Hand terminal Teleservice Internal and external coolant Operator cabin Chip conveyor SADDLE (X-AXIS): Horizontal movement from the center to the right side 4,800 mm Horizontal movement from the center to the left side 3,100 mm Vertical distance between the saddle rails 1,400 mm Speed / range 0 - 16,000 mm / min GANTRY TRAVEL (Y-AXIS): Gantry stroke 5,000 mm Feed 0 - 16,000 mm / min RAM (Z-AXIS): Maximum cutting force when turning 60 Kn Enter minimum bore 550 mm Guide length 1,600 mm Speed / feed range 0 - 16,000 mm/min Spindle speeds: Range 1 rpm Range 2 0 - 1,100 - 3,150 rpm Spindle torque: Range 1 2,400 - 2,400 - 850 Nm Range 2 450 - 450 - 160 kNm

Condition: excellent (used), For sale: CNC rotary table from the renowned brand Fadal Engineering (USA), model VH65. Professional 4th axis designed for machining centers, especially Fadal VMC, but integration with other CNC machines is also possible using the appropriate controller. Technical specifications: • Model: VH65 • Table diameter: 165 mm (6.5”) • Gear ratio: 90:1 • Pneumatic brake (M60 ON / M61 OFF) • Industrial multipin connector • Serial no.: 4630298 Condition: used, mechanically functional, normal signs of operation. Solid and heavy construction – ideal for precise 4-axis machining. Bwjdpfx Asw R St Ned Ajl

Condition: excellent (used), Year of construction: 2017, operating hours: 26,000 h, functionality: fully functional, SPINNER - TC 800 110MC The TC800 is a powerful universal machine for turning larger workpieces with diameters up to approx. 400 mm. It is equipped with a two-stage gearbox—ideal for applications requiring particularly high torque with large workpiece diameters. Designed for heavy-duty machining Robust construction with hardened and ground slideways Machine type: CNC turning and milling center Model: TC 800 MC Year of manufacture: 2017 Control: 840 D sl Siemens ShopTurn Turning diameter: max. 400 mm Turning length: max. 900 mm Control: 840 D sl Siemens Max. swing diameter: 800 mm Main spindle: Max. speed: 2,600 rpm Drive power—main spindle: 22 / 33 kW Chuck diameter: 400 mm Spindle nose: A11 ! Type: ISM 110 mm Travels: X-axis: 360 mm Z-axis: 900 mm C-axis: 360° Tool turret: Tool stations: 16 pos. Driven stations: 8 pos. Tool holder: VDI 40 Speed range—driven tool stations: max. 4,000 rpm Tailstock: Tailstock taper: MK 4 Quill diameter: 110 mm Tailstock travel: 900 mm Feed rates: Rapid traverse X: 15 / Z: 24 m/min Total power requirement: 48 kW Machine weight approx.: 7.5 t Space requirement approx.: 5.0 x 3.0 x 2.5 m Accessories: Documentation Chip conveyor 3-jaw chuck SMW 400 mm Glass scale X-axis C-axis Driven tool system Tool turret Steady rest SMW Autoblock 50–200 mm Tailstock hydraulic / automatic Tool measurement One set of tool holders incl. 5 driven tool holders One set of chuck jaws Oil mist separator Tool cabinet Bjdpfx Aoy Hmnzod Aewl Seldom-used machine in top condition!

Condition: excellent (used), Year of construction: 1989, I am selling a CNC lathe Mazak QuickTurn 20N. Lathe in bdb condition. Equipment: MAZATROL T-2, control MAZATROL CAM-T-2. Bodpju U R E Asfx Ad Aswl

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Options: Chip conveyor Bar feeder interface Parts catcher 15 bar coolant system Bwedpfxsyf A Nws Ad Aol 3-jaw chuck KNCS N 260 36-tool magazine CAPTO C6

Condition: good (used), Year of construction: 1998, functionality: fully functional, Siemens 840D control, spindle bore 65 mm, main and sub-spindle, 2 x C-axis, driven tools on both turrets, Hainbuch chuck on both spindles, fire extinguishing system as it is operated only with cutting oil, high-pressure pump, chip conveyor, FMB-Turbo bar feeder year: 2017, toolholder package, immediately available. Bwedpfxjy Icwno Ad Ael

Condition: used, Year of construction: 2005, Technical details: turning diameter: 356 mm turning length: 705 mm control: MSX 850 MAPPS II swing dia.: 755 mm standard turning diameter: 275 mm travel -x axis: 260 mm travel -y axis: 100 (+-50) mm travel -z axis: 795 mm rapid travel - longitudinal/face: 30 / 30 m/min rapid traverse Y-axis: 10 m/min Rapid travel B-axis (parts transfer subspindle): 30 m/min Spindle 1 RPM: 4000 1/min Spindle 1 Power: 18,5/18,5/15 kW Spindle 1 max. bar diameter: 80 mm Spindle 2 RPM: 6000 1/min Spindle 2 power: 11 / 7,5 kW turret stations / rotary tool stations: 16 / 16 VDI 30 : 5.5/5,5/3,7 kW speed of driven tools: 6000 1/min total power requirement: 39,2 kVA weight of the machine ca.: 6,2 t dimensions of the machine ca.: 3,1 x 2,0 x 2,2 m Accerories Chip conveyor Spindle 1 Chuck Kitagawa B 210 (250 mm) Spindle 2 Chuck Kitagawa B 206 (160 mm) High precision Turning and Milling Centre with Y-axis and sub spindle. Easy programming by MAPPS II Control. Bwsdpoy H R D Tofx Ad Aol *

Condition: used, Year of construction: 2011, Base Machine M800 X5 TV 1 WORKING RANGE X: 5,020 mm Y: 1,830 mm Z: 675 mm Clearance Height: 300 mm (from 50 mm suction cup height) MACHINE STRUCTURE The base structure is a monolithic construction made from thick-walled steel. It is reinforced across the entire machine bed with welded components, providing exceptional stability. The table design, with its large base, is the key to ensuring lasting precision and stability. The machine’s layout enables the operator to achieve optimal workflow with minimal space requirements. The mobile gantry is built as a solid monoblock. It is positioned in the X direction on prismatic, ground guides with recirculating ball carriages. The machining unit is mounted on this mobile support carriage, also on prismatic, ground guides and recirculating ball carriages. AXIS MOVEMENT All axes travel on prismatic linear guides with large cross-section and recirculating ball shoes with a wide contact surface, which ensures optimal sliding, even at high speeds and accelerations. The precise and fast positioning of the movable gantry (X-axis) is achieved via helical rack and pinion. Large cross-section recirculating ball screws ensure accurate positioning of the machining unit along the movable gantry (Y and Z axes). The perfect mechanical dynamics and maximum positioning accuracy are controlled by high-quality drives and brushless motors. Max. axis speeds: · X-axis = 90 m/min · Y-axis = 90 m/min · Z-axis = 30 m/min Safety device with bumper and light barrier 1 Bumpers with sensors are fitted to the movable upright, and a light barrier system is installed at the front of the machine. If the operator enters the active zone, the X-axis travel speed is reduced to a lower value of 25 m/min without stopping the machine. This system allows parts to be loaded during pendulum operation without the limitation of access areas, as seen with pressure mat systems. This prevents unwanted interruptions in the machining cycle and offers greater freedom of movement around the worktable. CE certification for the safety system 1 Safety protection fence 1 Side and rear protection fence Automatic central lubrication controlled via CNC 1 The lubrication of the X, Y, and Z axes is controlled by the CNC; intervals are regulated automatically, without manual intervention. Central extraction connector 1 All individual extraction connections of the machining units are collected into a central extraction port. Inside the port, there are various slider valves controlled by the NC. This reduces the required extraction air volume. Chip conveyor 1 Maxi – 5-axis electrospindle 11 kW HSK-63 “Prisma K 1 5-axis electrospindle, 11 kW at 20,000 rpm S1 (100% duty cycle) Speed: max. 20,000 rpm Rotation direction: left/right Liquid cooling Tool interface HSK 63F Inverter 18 kW, stepless, smooth power delivery Max. rotation B-axis = 200° (+-100°) C-axis = 650° Thanks to the non-orthogonal axes, it is possible to perform complex horizontal positioning in a small workspace. This enables the machining of complex geometries without the risk of collision. Bwodpfx Adsxy Tmne Aol

Condition: used, Year of construction: 2016, Working area: X=3300 mm Y=1280 mm Z=150 mm Clearance height Operator terminal: 24" LED colour display Handheld terminal for axis speed control Software: "Woodflash Vacuum pump 90 m³/h/50 Hz or 108 m³/h/60 Hz Milling spindle 12 kW HSK F63 (12,000 rpm) 12-position linear tool changer on the left of the machine frame + pickup station Drilling head DH 16 4H 2S: Vertical 12 spindles Horizontal 4 spindles 2 grooving saws Storage location: Nattheim Bwodpjxy Tlwefx Ad Aol

Year of construction: 2007, condition: ready for operation (used), Turning diameter: 430mm, max. swing diameter over bed: 760mm, max. turning length: 860mm, center distance: 990mm, travel X/Y: 280mm/860mm, speed: 3400rpm, chuck diameter: 12inch, tool stations: 12. Machine dimensions X/Y/Z: approx. 3800mm/2000mm/1900mm, weight: approx. 6500kg. Documentation available. An on-site inspection is possible. Bwjdpsy Hvp Ijfx Ad Aol

Condition: good (used), Year of construction: 2015, Ref. -No.: 10647 Manufacturer: DMG MORI Type: DMF 360-11 Year of construction: 2015 Type of control: CNC Control: Heidenhain iTNC 530 Storage location: Halberstadt Country of origin: Germany Serial no.: 2903XXXX Machine-No.: 591XX X-Travel: 3600 mm Y-Travel: 1100 mm Z-Travel: 900 mm Max. Workpiece Weight: 8000 kg Max. Tool Weight: 5 kg Max. Tool Length: ab Spindelnase 300 mm Workpiece Diameter With 2 Vacant Positions: 130 mm Tool Taper: HSK 63 Numbers Of Tools In Magazin: 120 Tool changer: 60 Spindle Speed: 20000 RPM Max. Torque: 288 / 187 Nm Rapid Travel X/Y/Z: 80 x 60 x 60 mm / min Main Drive: 35 / 25 kW Internal cooling: 40 bar coolant reservoir: 600 L. Further information: - Fixed table, often with an integrated NC rotary table (FD version) - Spindle: Standard speed is typically 10,000 rpm; more powerful variants are available as an option - Traveling column design: Ideal for pendulum machining and long workpieces - Stability: The mineral cast machine bed ensures high damping and precision - 5-axis: Usually equipped with an NC swivel milling head (B-axis) The machine can be viewed while powered on by appointment. Translated with (free version) Bwsdpfxey Hrpde Ad Ajl

Condition: good (used), Year of construction: 2010, Ref. -No.: 10646 Manufacturer: DMG Type: DMU 125 FD duoblock Year of construction: 2010 Type of control: CNC Control: Siemens Sinumerik 840D Storage location: Halberstadt Country of origin: Germany X-Travel: 1250 mm Y-Travel: 1000 mm Bedpfsy Hrn Hsx Ad Aowl Z-Travel: 1000 mm NC swivel rotary table: 1250 O Tool Taper: HSK - A100 Numbers Of Tools In Magazin: 40 Spindle Speed: 12000 RPM Main Drive: 44 kW Internal cooling: 40 bar Further information: - Universal milling head with controlled B-axis - Tool changer with horizontal double gripper - Taper cleaning for HSK-A 100 - Safety enclosure - Coolant tank, 600 L - Chip conveyor - Rotating viewing window - 3D path control - Heidenhain TS 649 DMG infrared probe - Siemens 840D electronic handwheel - Flushing gun with pump The machine can be viewed in operation by appointment.

Condition: used, Year of construction: 2005, functionality: fully functional, For sale: CNC Turning Center EMCO Turn 325-II (Year 2005) Bwedpfx Aoxp Iyhod Ael Condition: Good, technically sound. Manufacturer: EMCO Maier GmbH (Austria) Model: Turn 325-II Year of manufacture: 2005 A compact and reliable CNC turning center suitable for metal part machining, threading, and milling in small to medium-sized production runs. Main technical specifications: (based on EMCO Turn 325-II model specification) Control: Siemens Max. turning diameter: 250 mm Max. turning length: 500 mm Spindle speed: up to 5000 rpm Tool turret: 12 positions (automatic tool changer) Max. tool length: 100 mm Motor power: approx. 15 kW Cooling: integrated cooling system Power supply: 400 V / 50 Hz Machine weight: approx. 3500 kg If you have additional questions, we are happy to assist.

Condition: like new (used), Year of construction: 2005, operating hours: 1 h, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 250 mm, Hello Knuth X Graph 600 - Dima Great opportunity – the machine has never been used. This CNC milling machine is an unused stock item, still on its original steel shipping pallet. The photos show the pumps are still partially wrapped. The machine is dusty, some areas of the paintwork are faded and there are minor paint chips in some places. Heavy-duty cast iron construction, linear guides, servo drives. The control cabinet is clearly laid out for easy fault diagnosis. Equipped with LNC 520 control system. To this day we operate lathes and milling machines from the same manufacturer. The machine is currently powered on for demonstration purposes. We have not found any non-functional accessories. The control system is user-friendly and has considerable online support. THIS MODEL IS STILL AVAILABLE BOTH FROM THE MANUFACTURER AND DEALERS. Year of manufacture: 2005. Machine specifications (sourced online): Bwedpfx Adeyxfmgj Aol - Travel: 600 x 400 x 250 mm - Distance between table and spindle nose: 250 mm - Table size: 600 x 400 mm - Max table load: 300 kg - T-slot: 12 mm, pitch 63 mm, 4 slots, cast iron table - Spindle speed: 3,000 – 24,000 rpm (to be verified), spindle motor 2.2 kW - Inverter approx. 5 kW, ER 20 taper - Rapid feed: 10,000 mm/min; working feed: 3,000 mm/min - Positional accuracy: +/-0.004 mm; repeatability: +/-0.003 mm - Gantry width: 720 mm - Air supply: 0.6 MPa - Weight: 2,000 kg - Dimensions: 1,600 x 1,600 x 2,000 mm - Power supply: 6 kW, AC 380V, 3-phase - Direct servo drive coupling - Centralized lubrication system - Coolant for machining (emulsion) - Work lighting - Signal beacon - Robust pumps included

Condition: used, Year of construction: 2016, Used Machine Year of manufacture: 2016 Equipment and technical data: - Electrical system 3x400V 50 / 60Hz - Cardanic 5-axis electrospindle, 12 kW (S6), HSK F63 - 24,000 rpm Bodpey Ih Rgjfx Ad Aowl - Ceramic bearings including liquid cooling with stepless, height-adjustable extraction hood – motor-driven control - Full rated power available at approximately 12,000 rpm - Speed range: 1,000 - 24,000 rpm - Drive: 3-phase high-frequency motor controlled via inverter - Rotation direction: clockwise/counterclockwise - 2 controlled compressed air connections - Interface for aggregates - Tool weight (rotating): 6 kg - Max. saw blade Ø 350 mm - Spindle cooling: liquid cooling - Extraction hood, stepless adjustment Profit H350 16.30: CNC machining center in gantry design (without tooling) with digital drives (driven on both sides). The machine frame of the Profit H350 16.30 is made from thick-walled, electrowelded box sections. The internal steel ribbing provides high rigidity. Machining area H350 16.30: Axis travel: X = 4,000 mm Y = 1,970 mm Z = 455 mm Working area: X = 3,000 mm Y = 1,500 mm Z = 150 mm clearance height Axis positioning speeds: Depend on the selected safety system (details available in the layout). - Double-sided driven gantry X-Axis guidance system: The drive for the X-axis gantry is via a rack and pinion with angled, crowned teeth – guaranteeing maximum precision. The reduction gearbox ensures top machining quality and repeatability. Bearing via encapsulated recirculating ball carriages running on hardened and ground linear guides. Y-Axis guidance system: Bearing via encapsulated recirculating ball carriages running on hardened and ground linear guides. The Y-axis is positioned via a ground recirculating ball screw. Z-Axis guidance system: Bearing via encapsulated recirculating ball carriages running on hardened and ground linear guides. The Z-axis is positioned via a ground recirculating ball screw. Automatic central lubrication: Grease is automatically delivered to the guide carriages of X, Y, and Z axes as well as the ball screws of Y and Z axes. The lubrication cycle is executed automatically after a preset interval. 12-position linear tool changer on the left side of the machine frame including a pickup station for aggregates: The 12-position linear tool changer ensures minimal setup times and offers ample space for milling tools. One aggregate change station (see layout for configuration options). Max. tool diameter 250 mm. Max. tool length 240 mm. Drilling head DH 18 6H 1S: Vertically: 12 spindles (7 spindles in X-direction and 5 spindles in Y-direction). Horizontally: 6 spindles (4 spindles in X-direction and 2 spindles in Y-direction). Stroke = 70 mm, max. drill length = 70 mm, shank diameter = 10 mm. All spindles are individually driven and selected. 1 grooving saw in X-direction, max. saw blade diameter 120 mm.

Condition: used, Year of construction: 2005, Used machine Year of manufacture: 2005 Equipment and technical data: Console machine (6 units) Travel dimensions: X = 3490 mm Y = 1690 mm Z = 205 mm Machining dimensions: X = 3050 mm Y = (Max. milling dimension - tool radius) 1345 mm Z = 150 mm Drilling head TF 20 Power: 2.2 kW 8 vertical spindles, spindle spacing 32 mm in X 6 vertical spindles, spindle spacing 32 mm in Y 2+2 horizontal spindles in X 1+1 horizontal spindles in Y with integrated grooving saw blade 120 mm with electro-milling spindle 9.2 kW with ISO-30 interface with C-axis with angle aggregate with 12-position tool changer with tool change station for angle aggregates with vacuum pump 80-100 m³/h Total connected load: 16 kW Compressed air: 6 bar Compressed air consumption: 210 NL/min Extraction nozzle: 250 mm Extraction volume: 5300 m³/h Extraction speed: 30 m/sec Bwjdpjy Ih Rmofx Ad Ael Dimensions: 5940 x 3800 x 2510 mm Weight: 3700 kg Availability: by arrangement Location: 63934 Röllbach