Used Moving Bezel for sale (2,252)

Condition: used, Year of construction: 2009, Used Machine Year of manufacture: 2009 Condition: Overhauled by a Hirzt specialist Description: The machine’s design is very simple. The workpiece is loaded into the machine. A quickly adjustable stop with pneumatic locking centers the workpiece in the machine. After a foot switch is activated, the workpiece is pneumatically clamped and automatically fed to the drilling unit (30 m/min). The vertical spindles drill from below, so that the resulting chips do not remain on the workpiece, as they would in a machining center. The horizontal spindles operate on two sides of the workpiece. The workpiece can be of any length, as it is guided to the drilling unit (= X-axis). The drilling spindles can be freely programmed individually or in groups and move along the Y-axis. The drilling depth and the horizontal drills are controlled by the Z-axis. After all holes have been drilled, the workpiece is conveyed back to the infeed side or, if desired, to the outfeed side. While in conventional machining centers the workpiece is clamped using a vacuum and the vacuum clamps must be adjusted to the workpiece size, this step is completely eliminated with the 3-axis-controlled point-to-point drilling machine. Advantages: - High machining speed - Good value for money - Compact footprint All drilling operations can be performed in a very small space: - Row drilling - Structural holes - Hardware holes - Cabinet joint holes Features: - Welded machine frame - Drilling head with 7 vertical drilling spindles and 1 horizontal double drilling spindle - 3-axis control: - X: NC-controlled plate feed via “overlapping” pneumatic clamping jaws - Y: NC-controlled drill head movement - Z: NC-controlled drilling spindle depth adjustment - TRK precision guides - Pneumatic split pressure beam above the drilling unit - Pneumatic roller hold-down devices in the feed area - Pneumatic clamping jaws for transport - Pneumatically lockable side stop with rollers - Control via Windows XP-based PC (1 GB flash memory) - 8?? color screen - Alphanumeric multifunction keyboard including mouse - Network card - USB interface Technical Specifications: Bjdpfx Aqszwg Tiswoll - Number of controlled axes: 3 - Maximum panel width: 1,000 mm - Maximum drilling width: 800 mm - Maximum feed rate (X-axis): 30 m/min - Drill speed: 3,400 rpm - Maximum drill bit diameter: 35 mm - Maximum total drill bit length: 70 mm - Drill bit chuck: 10 mm shank with clamping surface - Power rating: 2.5 kW - Exhaust port diameter: 100 mm - Required pressure: 6 bar - Working height: 900 mm - Fold-out roller support on the feed side, 500 x 750 mm Dimensions: 1,650 x 1,920 mm Availability: available shortly Location: North Rhine-Westphalia

Condition: good (used), Code: 0246 Brand: OMGA Bledpfx Aoxztydsqwol Model: TR 2B - NC - CE Standard Automatic double mitre saw with numerically controlled positioner for cutting frames, wood profiles, furniture, wooden window frames, doors, plastic materials, and various - CE standard Technical data: Numerically controlled positioner: allows cutting lists to be stored and the moving head to be positioned automatically Cutting length 3500 mm Blade diameter 350 F 30 mm Motors each 2,2 Kw Rpm 3000 Cutting width 170 mm Cutting height at 90° 102 mm N° 2 vertical pneumatic pressers Suction mouth diameter 80 mm Compressed air 6-7 bar Overall dimensions mm 4400 x 1000 x 1500 h Weight kg 600

Condition: used, Year of construction: 2020, CNC-CONTROLLED MACHINING CENTER WITH MULTIFUNCTIONAL TABLE - WORK CELL VERSIONX400 CELLDrilling and milling made for you!The numerically controlled machining center is equipped with a wide range of milling/drilling tools to meet every need in the processing of wood and similar materials.- More powerful, with drilling spindles with 8,000 rpm and . Technology, the toughest spindle available on the market, with over 1,000 maintenance-free hours of use. Better and more comprehensively equipped, with various configuration options thanks to the multifunctional table to optimally equip the machine according to your needs. Easier and more understandable programming thanks to the integrated MAESTRO CNC CAD-CAM module. Easier to use: the work table is accessible at all times, the electrical cabinet and vacuum pump are integrated, and in the PRO SPACE configuration there are no guards. Supporting structure. The supporting structure consists of a particularly strong monolithic steel base, heavily ribbed and very rigid. The particularly wide support was specifically designed to give the machine stability, ensuring consistent precision regardless of the working conditions and eliminating the need to anchor the machine to the floor. The base forms a large and solid support for the mobile column: the work unit is thus equipped with a balanced, stable, and durable support that can withstand the most extreme stresses, ensuring higher quality performance and greater precision. The mobile gantry consists of a single, solid unit anchored to the base on both sides and slides on pyrotechnic guides with top-quality ball-return slides. The dual motorization along the X-axis ensures top performance even under demanding working conditions. The movement of the lower moving unit (X-axis) and the working unit along the rod of the moving unit (Y-axis) is achieved thanks to a rack/pinion transmission with helical teeth. this creates a greater tooth-to-tooth thrust which achieves greater acceleration and greater speed along the X and Y axes. The specially designed helical gearing ensures less wear on the mechanical components and less noise. The vertical Z axis is driven by a screw with ball return which ensures perfect balance with dynamic loading and strong acceleration and deceleration. The main milling unit is directly coupled to the Z axis carriage and ensures absolute quality of finishes as any vibrations are completely eliminated. Translation along the X-Y-Z axes is carried out by brushless motors driven by static inverters; These ensure: - Reduced processing times thanks to improved acceleration - Better positioning accuracy thanks to the high-resolution encoder - Zeroing of setup operations when switching on the machine thanks to absolute encoders - Zeroing of general maintenance operations since there are no brushes with the "brushless" system The management of the axis displacement and, in general, of the machine's working elements is carried out by an industrial NS module with digital D Blodovvi N Iepfx Aqwjl

Condition: new, Year of construction: 2024, Martin T 45 thickness planer with XPLANE cutterblock The T45 thicknessing machine offers ideal conditions for modern production: Bjdpjqlck Nofx Aqwjll It delivers cleanly planed surfaces, is quick and easy to operate and works extremely quietly. and works extremely quietly. The standard electronic control system makes Thanks to 99 storable planing dimensions, setting the planing height is so easy that even the the first workpiece fits perfectly. Of course, the thicknessing table can also be moved at the simple press of a button, or can be incremented by 0.1 mm. upwards. The switching elements of the feed control are also within easy reach. reach. The heavy, vibration-damping composite stand with the high-quality the high-quality bearing-mounted planing shaft guarantees excellent surfaces. Thanks to the sound-insulating construction, you can work quietly even in the standard version. - Planing width: 630 mm - Weight: approx. 1,200 - 1,400 kg - Planing height: 2.8 - 300 mm - Table length: 1,260 mm - Workpiece length min.: 270 mm - Speed: 5,000 rpm - Operation: 1-axis control for planing dimension, max. 99 values can be stored, 49 of which can be used for a freely programmable planing sequence; button for manual quick and fine adjustment of planing thickness according to digital display, push button for cutterblock start and stop, integrated operating hours counter - Cutterblock: Xplane solid steel cutterblock Cutterblock with 3 spiral rows of knives (33 cambered hard metal knives per row), delivery includes full set of knives and a Torx T20 T-wrench; shaft speed 6,000 rpm included; The emission sound pressure level LpA during processing is reduced by 10 dB(A) - Thicknessing table: Electric thicknessing table adjustment with fine adjustment, travel speed 10 mm/s, mounted on 4 support spindles to prevent tilting, table surface precision-planed - Feed: 2 speeds 6 / 12 m/min, can also be selected electrically during planing, large rubber feed rollers Ø 85 mm to compensate for different thicknesses of wood, rubber rollers are gentle on the material and self-cleaning, easy roller change; link pressure beam at the infeed - Suction system: Swivel-up, split hood with chip extraction nozzle Ø 160 mm, can be connected optionally on the left / right (in special cases on both sides); minimum extraction air volume: 27 m³/min. at 20 m/s - Maintenance device: Central lubrication strip for oil lubrication points; bearing / cutter shaft lubrication via nipple - Accessories: 1 grease gun, filled with long-life grease 1 oil gun 1 open-end wrench 1 tool for blade change 1 pair of blind knives 640 mm 2 pairs of TERSA reversible knives 640 mm CV - Emission values: Emission sound pressure level at the workplace LpA according to DIN EN ISO 11202 [dB(A)] Idle noise (without extraction) P1 65 Idle noise (w. extraction) P1 77 Operating noise (without extraction) P2 65 Operating noise (with extraction) P2 78 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle noise (without extraction) 84 Operating noise (with extraction) 90 Dust emission Low dust emission according to DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg - immediately available -

Condition: good (used), REF: MM6180 Available as a single lot comprising of 2x Tom Chandley Ltd Ovens and 1x Newsmith Stainless Ltd – Industrial Bread Pan Washer. Technical specification ⚙️ Tom Chandley Ltd – Electric 3-Deck Oven ✅ Manufacturer: Tom Chandley Ltd ✅ Model: Compac (3-deck, 2 x trays per deck) ✅ Voltage: 250V ✅ Power: 5.3 kW per phase (x3 phases) ✅ Date Code: 1979 (possibly - date code is 3.2.6.79.) Blsdpsw Rn Eujfx Aqwel 🗒️ Notes: Stainless steel construction, manual dial controls, single stack on stand with castors. Tom Chandley Ltd – CP MK4 4-8-8 Electric 4-Deck Oven ✅ Manufacturer: Tom Chandley Ltd ✅ Model Ref: CP MK4 4-8-8 (4 x decks, 8 x trays per deck) ✅ Date of Manufacture: January 1998 ✅ Voltage: 400/230V ✅ Phases: 3-phase, 50Hz ✅ Total Load: 61.84 kW ✅ Max Amps/Phase: 90.95A ✅ Largest Single Load: 23.73A 🗒️Notes: 4 decks with 8 trays per deck (32 trays total). Stainless steel, individual deck controls, heavy-duty commercial bakery use. Newsmith Stainless Ltd – Industrial Bread Pan Washer ✅ Manufacturer: Newsmith Stainless Ltd. ✅ Stainless steel construction. ✅ Front-loading with internal rack system for bread pans or trays. ✅ CE marked 🗒️Notes: Requires detergents approved by Newsmith Stainless Ltd to maintain warranty ❗Important: These machines are in the Republic of Ireland and subject to European import/export regulations. Responsibility for collecting/shipping these machines will be with the buyer.

Condition: used, Year of construction: 2002, Levibreton KCP is a calibrating machine for levelling granite tiles, which move on a conveyor belt, using a series of diamond tools. This machine is based on a revolutionary processing concept, covered by Breton patent, which employs calibrating spindles with double motorization: in each spindle, the first motor provides the low-speed rotation of the roller-holding head, while the second motor provides the high-speed rotation of 6 radial rollers equipped with di-amond tools. This new technology offers the following advantages: - rapid adjustment of the working width as the calibrating section does not require any variation; Bledpfx Aqsvuaxwswol - perfect surface levelling; - "fine-honed" surface finish which enables to reduce the number of the following levelling units and, consequently, the dressing costs.

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: 1013, REF: MM6216 1 X Comek vertical form, fill and seal bagging machine with Zodiac HS screen Technical specification ⚙️ ✅ Manufacturer - Comek Automatic Packaging Solutions ✅ Model - VPB 330 EVO. ✅ Date of manufacture - 2019. ✅ Weight - 2,500 Kg ✅ Installed power - 10 Kw Blsdpfxjxd Ubno Aqwol ✅ Sealing jaws - 330mm (horizontal) x 460mm (vertical). ✅ Overall dimensions - 2000mm long x 1500mm wide x 1800mm high. Note 🗒️ No printer.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, REF: MM5946 1 x DanTech UK Ltd 'Pig in Blanket' wrapping / rolling conveyor on mobile frame. Manufacturer - DanTech UK Ltd Model - PIB 400. Serial number - 8394. Date of manufacture - 2020. Belt dimensions - wire mesh, 5650mm long x 400mm wide. Electric supply - 400 V / 50 hz / 3 phase. Blsdpfx Asvw I Nieqwel

Condition: used, Year of construction: 2018, functionality: fully functional, The conveyor belt (3 pieces) from MTF Technik is for sale with CE marking and various functions. A video can also be provided via WhatsApp. Bledpowl Digjfx Aqwsl Length: 2000 mm Width: 400 mm Height: 700 mm Height: 850 mm - 1100 mm Constant belt speed: 16 m/min Tunnels are 20 mm high and can be moved every 300 mm

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: KB-20211022002, 3 x Hangzhou Kuangbo Machinery Equipment Co. Ltd 2000L beer tanks, previously used as a brite tank but can be used as an FV. Technical Specification: Model - KBBFT1300A. Date of manufacture - 2021. Capacity - 2000 litres. Notes: All 1.5inch Tri Clamp connections other than DIN PRV port on top, manway door, and larger triclamp Bsdpfx Aowl H Nisqwell Features: Port on top for dry hopping etc. 2x thermowells, one for a thermometer at front and one for temp sensor in back & a CIP arm on the RHS, with sprayball.

Condition: excellent (used), REF: MM6174 1 x Machinery Automation Ltd Capping line Technical specification: ✅ Manufacturer - Machinery Automation Ltd ✅ Model - MA-CET70 Capping Line. ✅ Cap Types - Screw Cap, Jar, Foamer, Dropper, pre-formed ROPP. ✅ Cap Diameters - 18 – 70mm (extended to 90mm). ✅ Bottle Height - 30 – 300mm Notes: Bledow E Ey Tjpfx Aqwel This has been built for glass jars, which include a 43mm cap, a 53mm cap, 73mm cap and 70mm cap. There are 4 x change parts with the elevator to suit these and the capper gets adjusted to suit without any change parts.

Condition: like new (used), Industrial Green Bean Topper – Stainless Steel Industrial green bean topper, designed for the automatic removal of the ends or tips of the beans prior to subsequent stages of cutting, washing, cooking, freezing, or packaging. The equipment uses a rotating, perforated drum system to perform the topping continuously, facilitating uniform product preparation and significantly reducing manual intervention. Its construction, primarily in stainless steel, and its design for continuous operation make it particularly suitable for canning companies, frozen vegetable plants, and industrial green bean processing lines. MAIN FEATURES -Type: Industrial green bean topper -Application: Green beans / pods -Function: Removal of the ends of the product -System using a rotating, perforated drum -Automatic and continuous processing -Continuous product feed -Automatic discharge -Construction primarily in stainless steel -Drum with safety protection -Motorized rotation system -Lower collection/discharge area -Hygienic design for the food industry -Robust construction for industrial use -Integrable into vegetable processing lines PROCESS The machine is designed to automatically top green beans using a rotating drum system. The product is continuously fed into the drum and advances as it rotates inside. During this process, the ends of the beans are exposed to the cutting system, allowing the tips to be removed automatically. Once processed, the beans are continuously discharged to move directly to the next stage of production. It can be integrated with: Feeding systems Vegetable washers Conveyors and elevators Green bean cutters Inspection and sorting tables Blanchers and cookers Blodpfx Aqox S Ezdjwjl Cooling systems IQF freezing tunnels Fillers and packaging machines APPLICATIONS Especially suitable for canning industries, vegetable processors, frozen green bean manufacturers, and fruit and vegetable processing plants that need to automate product preparation. Its continuous processing using a rotating drum and stainless steel construction provides an industrial solution for green bean processing lines intended for canning, freezing, or subsequent processing. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Year of construction: 2019, condition: used, functionality: fully functional, machine/vehicle number: ADS550×5000, For sale: Fenstek ADS550×5000 CNC-controlled double-head cutting saw from 2019 for the precise cutting of aluminum profiles. The machine is suitable for series production of profiles for windows, doors and facade systems. The two saw heads can operate independently or synchronously. The moving saw head is automatically positioned via a servo system. Key benefits: - Fully CNC-controlled - Two saw heads operating independently or synchronously - Automatic servo positioning of the moving saw head - Automatic height measurement system for precise cuts below 45° - Touchscreen operation - Integrated label printer for product identification and traceability - Infinitely adjustable saw feed - Heavy and stable machine bed Technical specifications: - Power supply: 380–420 V / 50 Hz - Total power: 5.5 kW Bedpfx Aqjx R U Epswoll - Saw motors: 2 × 2.2 kW - Saw blade diameter: 550 mm - Maximum cutting length: 5,000 mm - Minimum cutting length at 90°: 360 mm - Cutting angles: 45° and 90° - Repeat accuracy: ±0.1 mm - Air consumption: 60 l/min at 0.5–0.8 MPa A complete double-head cutting saw for companies that want to process aluminum profiles quickly, reproducibly and accurately.

Condition: like new (used), functionality: fully functional, machine/vehicle number: WFDFLT33903000214, empty load weight: 7,850 kg, maximum load weight: 31,150 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 14,905 mm, loading space width: 2,470 mm, loading space height: 2,853 mm, loading space volume: 101 m³, total length: 15,350 mm, total width: 2,550 mm, total height: 4,005 mm, suspension: air, tire size: 385/55 R22,5", tire condition: 100 %, color: black, #Chassis – General Haulage Semi-Trailer - X-tra Long, ~14,700 mm internal length - Lashing ring prep in floor sides (max. 13 pairs), 6 pairs fitted rear - 24t two-speed landing gear, reinforced, loaded coupling, single-side operation, half-round foot - Pull-out ladder at rear - Side door retainer - Steel rear underrun protection - Rear mud flaps full width; anti-spray flaps to EC standard - Rear impact protection - Aluminium ladder ~3,550 mm, side bracket - Plastic toolbox w/ drawer & shelf, 650x520x670 mm, padlockable (lock not included) - Spare wheel carrier for 1 spare wheel, with wheel fixing kit - 1 spare wheel #Axles & Suspension - SAF disc brake axles, 430 mm disc diameter, axle stop on 3rd axle, bolted/clamped - Laser-aligned axles/chassis – reduces tyre wear and fuel consumption - Air suspension with bellows pressure gauge #Braking System - 2-line air brakes, colour-coded lines for easy service - Spring-loaded parking brake - 2 anti-mismatch coupling heads front, no connecting line - EBS, socket front, no connecting cable - Towing vehicle must ensure ABS effectiveness - Lift/lower valve on control panel, front left ahead of axles - Driving stability system - AAC Basic auto axle-load relief (last axle), manoeuvring aid to 20 km/h, manual off - Trailer info centre & EBS CAN-bus axle-load display (cab): loads, mileage, diagnostics (not calibrated; pre-equip.) - TPMS Haldex tyre monitoring via EBS (truck pre-equipped) - Additional air connection rear left, quick-release #Wheels & Tyres - 385/55 R22.5" - Polished alloy wheels, AlexRims #Electrics - 24V multi-chamber LED lights w/ resistor, yellow side LEDs, LED plate light, Aspöck EcoLED 2 - Premium LED side marker lights, 20 LEDs/light, optionally coupled to yellow LEDs (flashing) - 2 white LED front position lights - 2 white/red LED outline marker lights rear - 1x 15-pin socket front, no connecting cable - LED work lights both sides, via reversing light - 2 additional rear LED work lights, via reversing light #Sliding-Floor Hydraulics Bedezw Dygopfx Aqwjll - Hydraulic cylinder w/ sliding mechanism in floor, 2-circuit hydraulics - Forward/reverse switching, electric, corded remote; controls front left ahead of axles - Sliding-floor power via side/parking light - Hydraulic operation via truck PTO - Hydraulic connection, hose at front wall, HDK screw coupling, NW 48 mm - 2-circuit hydraulic system required; rec. 110 l/min, 250 bar, min. tank 100 l #Sliding Floor - Sliding floor w/ rear wear plate, stainless steel (V2A) - Aluminium floor boards, 8 mm profile, ribbed - Aluminium end caps #Body - Aluminium box body, abrasion-resistant; alu hollow-section walls, welded frame w/ reinforcement - Rear wear plates on side walls ~3000x1900x4 mm, fully welded - Front service door left, steps both sides - Sliding wall (easier unloading), reinforced tarpaulin flaps below, rail scraper - Rear wall: alu hollow-section 2-leaf door (1/2–1/2), U-seal edging, 2 rotary bar locks, mech. lock (rear-left), pivoting top cross bar, Fliegl "I-Lock", padlockable - Rear wall with pneumatic safety lock, ahead of axles left (replaces mechanical lock) - Standing platform, ladder access both sides, handrail, for roof tarpaulin operation - 4 removable, pivoting reinforced cross bars for tarpaulin support - Reinforced roller tarpaulin ~900 g, one-side release, 2 longitudinal + 3 ratchet straps, hook/rope fixing, stops right

Condition: used, functionality: fully functional, Well-maintained, inclined cross conveyor from Esterer, originating from a small sawmill. Drive via geared motor. Bljdjzw Epcjpfx Aqwsl 6 chain strands. Spacing: 2300 mm - 1500 mm - 1200 mm - 1000 mm - 1200 mm. Conveyor length approx. 3000 mm. Chain pitch 80 mm.

Condition: used, mileage: 2,102 km, gearing type: other, fuel type: electric, color: yellow, overall weight: 1,440 kg, empty load weight: 836 kg, number of seats: 1, first registration: 09/2020, emission class: none, suspension: other, Year of construction: 2020, operating hours: 2,102 h, total length: 1,813 mm, driver cabin: other, wheelbase: 1,035 mm, construction height: 1,420 mm, fuel: electricity, The Jungheinrich EZS 130 tow tractor offers a compelling combination of modern technology, a compact design, and efficient in-plant transport performance. With its initial registration in September 2020, the vehicle presents itself as an attractive solution for companies seeking a reliable and practical electric tow tractor for daily use. Particularly noteworthy is the low operating time of only 2,102 operating hours. This makes the Jungheinrich EZS 130 an excellent opportunity for companies that want to use a relatively little-used vehicle. The proven Jungheinrich design makes the tow tractor a reliable partner for a wide range of transport tasks in warehouses, production, and logistics. Bledpoy Dvppefx Aqwjl Thanks to its compact and maneuverable design, the EZS 130 is ideal for in-plant material flow, especially when goods, roll containers, or other transport items need to be moved efficiently and safely. The vehicle supports a smooth workflow and can help to optimize transport routes in daily operations. Anyone looking for a modern electric tow tractor with low operating hours and an attractive year of manufacture will find the Jungheinrich EZS 130 to be a particularly interesting option. It is a versatile work tool for companies that value efficiency, practicality, and proven technology. Sale only to commercial businesses (agriculture, freelancers, small and large businesses) or for export. Subject to errors and prior sale.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, 1 x Tsunezawa Group automatic filleting machine that can be operated by 1 person. This is a specialised, high-efficiency filleting machine designed for salmon processing, specifically to remove the belly bones while producing a three-piece fillet (three-way filleting). Blodsy Rimzjpfx Aqwel Manufacturer - Tsunezawa Group Co., Ltd. Model - TAF-BG Filleting Machine. Date of manufacture – 2019. Throughput – 20 to 30 fish / minute, depending on fish size. Processing capability – can handle fresh salmon and thawed salmon down to -4C. Electrical requirements – 400 V / 50 hz / 3 phase. Power consumption – 3.45 kW. Overall dimensions - 2300mm long x 1550mm wide x 1800mm high. Weight – 1,000 kg (approx.). Condition – Very good - last used for production in summer 2025. Supplied with User Manual and spare knives.

Condition: used, Year of construction: 2019, Holz-Her Dynestic 7532 10.5 automatic CNC nesting machining center with Holz-Her Store-Master 5110 panel storage system Used machine Year of manufacture: 2019 Features and Technical Specifications: - Designed for classic nesting machining with a wear plate - Welded machine frame with ground and hardened prismatic guides for the traveling column, toolhead, and consoles - Gantry-style moving column - Rack-and-pinion drive, helical teeth, in the X and Y directions; ball screws in the Z direction for precise positioning - Machining dimensions: - Max. support area on nesting table: X = 3100 mm Y = 1560 mm - Max. travel ranges: X = 4695 mm Y = 2100 mm Z = 293 mm - Max. clearance height of DYNESTIC table Z = 100 mm from top edge of table (without wear plate) - Maximum programmable speed Vector speed: 128 m/min X = 80 m/min, Y = 100 m/min, Z = 25 m/min - DYNESTIC table: - Rigid, continuous machining table with grid markings - continuous slots in the X and Y directions - Slot spacing: 50 mm - Includes 25 meters of sealing cord for securing the wear plate - Vacuum fields: 1-circuit vacuum system - Drilling unit 7877: - 19 spindles - Drive power: 1.7 kW - 13 vertical spindles: - individually controllable - U-shaped arrangement - 5 in the X direction and 4 in the Y direction - 32 mm pitch - max. drill bit diameter: 35 mm - Total drill length: 70 mm from the mounting end (depending on panel thickness) - Spindle extension stroke: 70 mm - Rotation direction: Alternating clockwise and counterclockwise - n(max): 1000–4400 rpm, continuously adjustable - Mounting: M10 thread – 11 mm interference fit - Tool-free, without mounting adapter - 6 horizontal spindles: - 2 double drilling spindles in the X direction - 1 double drilling spindle in the Y direction - Mounting: M 10 thread, 11 mm interference fit - Total drill length: max. 63 mm from mounting end - Tool-free, without chuck - Milling unit 7842: - Power: 12.0 kW (S6) - n(max) = 1,000–24,000 rpm, continuously variable - Max. power at 12,000 rpm to 24,000 rpm - Air-cooled - With HSK-F 63 tool holder - With right-hand threaded nut (for right-hand rotating tools) - With collet chuck with HSK shank - Ceramic ball bearings (hybrid bearings) - Max. tool weight: 6 kg (including holder) - Tools: Milling and grinding tools, max. Ø 160 mm - Safety guarding in accordance with CE standards - Protective fencing on the sides and rear - Vacuum pump: 500 m³/h, dry-running - Operator safety via light curtains in the front area of the machine - Handheld control unit for remote control of the machine with the following operating functions: - Start/Stop of the machining program - Speed control of the machining cycles - Reset button - Manual feed/rapid traverse for all axes - Emergency Stop - CAMPUS V7 CAD/CAM software, 1 machine license consisting of: - CAMPUS NC-HOPS: - Graphical variant system with WOP and CAD/CAM features for creating Bodezlbrpopfx Aqwell part variants using macro technology - CAMPUS MT-Manager - CAMPUS Workcenter - CAMPUS DXF interface - Automatic centralized lubrication - Automatic lubrication according to defined lubrication intervals - Additional dust sealing via positive pressure in each guide carriage - Simultaneous lubrication: - for all linear guides in the X, Y, and Z directions - for all ball screws in the Y and Z di...

Year of construction: 1993, condition: good (used), Tensioning car, Braun WES fully hydraulic with auxiliary car with rails track gauge: 79 cm Blsdpfx Aefuh Dyeqwol in good condition – immediately available Please also view my other listings. I look forward to your inquiry.

Year of construction: 2024, condition: new, The OASI.S (Open Automation Systems Integrator Server) robotic material handling system for the automatic loading and unloading of IV bags and trays. This system is designed to transport filled IV bags from the cleanroom, load and position IV bags into trays using a pick-and-place robot, stack trays on a pallet, and move pallets of empty trays to and from cells. The system consists of connecting conveyors, a clean station with a delta robot, a robotic loading station (delta robot and 4-axis robot), and an unloading station (2 x 4-axis robots). The line includes: Bjdpfjzx Aldox Aqwsll - 3 x FANUC M-410iC/315 robots, serial numbers: R24500486, R24500487, R24500488, manufactured in 2024 - FANUC M-3iA/6S delta robot, serial number R244001FB, manufactured in 2024 - FANUC M-2iA/3SL delta robot, serial number R2430075E, manufactured in 2024 The individual robot cells are equipped with dedicated grippers, four Buuusch MM 1104 B V03 TNXX pumps, conveyor feeders, additional electrical cabinets, and many other accessories.

Condition: excellent (used), functionality: fully functional, Möhringer main stem and log separator with 3 separator arms. Blsdpfx Aszxrnuoqwjl Distribution and singulation are performed hydraulically. Suitable for short logs up to 5 meters in length. Includes hydraulic cylinders and solenoid valves. Separator arm spacing: 1.25 and 1.60 m.

Year of construction: 2006, condition: excellent (used), Transport and automation system for motor housings with control system Technical parameters of motor housing Inner diameter: 66 mm, 70 mm, 74.2 mm Wall thickness: 2 mm Length: 87.8 mm – 135 mm Material: Steel, painted Technical parameters of grinding machine - Two-belt grinding machine, type M2-120, manufacturer Weber - Includes continuous prism conveyor with adjustable speed via frequency converter Blsdpjzww Ecofx Aqwjl System output: max. 52 pieces per minute Functional description: The motor housings are manually removed from the grid box by one person and placed on a buffer table in a defined position. A row pusher moves the foremost row onto a permanent magnetic articulated belt conveyor. The motor housings are automatically transported and transferred to a permanent magnetic combination conveyor. After a 90° deflection, the housings are buffered in a roller track. One housing is released at a time and fed to a prism conveyor. The combination conveyor is axially adjustable, so that a centric feed to the prisms is ensured depending on the housing length. After the grinding process, the motor housings are transferred to another permanent magnetic combination conveyor. After a 90° deflection, the housings are brought into a stationary position and guided onto a permanent magnetic articulated belt conveyor. With stamping number control system Syscona For secure and reliable detection of stamping numbers in metal tubes. Detection station with high-resolution CCD black and white camera with scan sensor. With control system Syscona For detection of bumps in tubes according to a pattern. HighVision HV video camera system Defective motor housings are identified and transmitted accordingly to the rejection device. A swivel cylinder directs the housings onto a parallel articulated belt conveyor, which transfers them to a buffer table. DISMANTLING by customer!

Condition: reconditioned (used), Year of construction: 2014, Available immediately Moving column machine FS 480 - Total travel X=4800 mm, ideal for flexible machining of large parts Blodpfx Ajzxzq Seqwel - Travel X=4,800 mm, Y=1,500 mm; Z=3500 mm - iTNC 530 control with wireless HR 550 FS radio handwheel, operator's cabin on the traveling column - 2-axis NC universal drilling and milling head, fully simultaneous and positioning operation per traveling column - HSK-A 100 spindle, 10,000 rpm, 220 Nm spindle torque - IKZ air up to 6 bar - Dust protection packages to protect the guides and drives - BA 4 per traveling column - Radio measuring probe RMP 60 Renishaw - Work area monitoring with network camera and monitor at the rear of the system - Process monitoring ToolScope basic system - Additional control panel at the rear of the system - Partial enclosure consisting of work area and sheet metal door, rear with safety fence with unobstructed view into the work area - incl. fixators - Cooling units - incl. internal tool cooling (closed cooling circuit) with cooling unit - short delivery time, available immediately, subject to prior sale Inspection possible by arrangement Spindle hours: approx. 9079 SPECIAL PRICE!!!

Condition: used, Year of construction: 1995, Number of belts: 2 Max. working width: 920 mm Min. working height: 3 mm Max. working height: 160 mm 1st belt: Calibrating roller Design of 1st roller: Grooved steel roller Abrasive belt length 1st unit: 1525 mm Abrasive belt width 1st unit: 930 mm Abrasive belt speed 1st unit: 16 m/sec 2nd belt: Combination unit Design of 2nd roller: Grooved rubber roller Sanding shoe 2nd unit: rigid Bedpfx Aszxt Ageqwjll Abrasive belt length 2nd unit: 1525 mm Abrasive belt width 2nd unit: 930 mm Abrasive belt speed 2nd unit: 16 m/sec Material thickness measuring device: Yes Fixed feed rate: 4.5 + 9 m/min Control: Hand control panel Elec./pneumatic belt oscillation: Yes Infeed height: variable (lower table moves) Table stroke: electro-motoric Table display: mechanical digital display Operating pressure: 6 bar Weight approx.: 1100 kg Motor power: 11 kW Extraction diameter: 200 mm Storage location:

Condition: excellent (used), TOYO JIDOKI TVP-E3 Automatic Vacuum Pouch Filling and Sealing Machine TOYO JIDOKI TVP-E3 automatic vacuum pouch filling and sealing machine, designed to automatically perform pouch feeding and handling, product filling, vacuum generation, and hermetic sealing operations within industrial packaging lines. The vacuum sealing system allows air to be extracted from the inside of the pouch before sealing, resulting in a compact and hermetically sealed package. This technology is particularly useful for food products where the goal is to reduce residual air inside the package before subsequent heat treatment, cooling, storage, or distribution operations. MAIN FEATURES -Manufacturer: TOYO JIDOKI -Model: TVP-E3 -Type: Automatic vacuum pouch filling/sealing machine -Application: Flexible pouches -Automatic operation -Automatic pouch handling and positioning -Multiple process stations -Product filling system -Vacuum system -Air extraction from inside the pouch -Automatic heat sealing -Control of the different stages of the cycle -Synchronized transport and transfer -Control panel / HMI -Industrial construction, primarily in stainless steel -Enclosures and safety protections -Illuminated status indicators -Designed for continuous industrial operation -Integrable into complete packaging and heat treatment lines PROCESS The pouches are fed into the system and automatically positioned at the different workstations. Once the pouch is opened and correctly positioned, the product is filled using the corresponding dosing system. Subsequently, the pouch moves to the vacuum stage, where the air present inside the package is reduced. Blodpfx Aqszxwy Aowel Finally, the machine performs heat sealing of the top of the pouch, resulting in a sealed pouch ready for the next stages of production. Depending on the line configuration, the pouches can continue to: Inspection systems Weight checkers Metal detectors Pouch washing machines Pasteurizers Autoclaves / retorts Cooling systems Dryers Case packers End-of-line equipment APPLICATIONS Especially suitable for the food industry, canning industries, and manufacturers of products packaged in pouches. Depending on the dosing system and the installed format, it can be used for different liquid, semi-liquid, solid products with liquid coating, and prepared foods, always subject to the specific configuration of the equipment. The combination of TOYO JIDOKI technology, automatic pouch packaging, and vacuum sealing provides an industrial solution for obtaining hermetically sealed flexible packages with an automated and repeatable process. Machine available for inspection. Additional technical information, pouch formats, production capacity, dosing system, dimensions, additional photographs, or videos can be provided upon request.