Used Mubea / Peddinghaus Mubea / Peddinghaus Linearschiene 6000 Mm for sale (72,043)

Condition: like new (used), Year of construction: 2024, Cantilever rack double-sided used: Hot-dip galvanized screw system Scope of delivery: 4 double-sided shelf stands, height 4,160 mm with foot section 1,200 mm 24 cantilevers with 1,200 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Also available in larger quantities: 20 stands in stock) Detailed description: - Stable steel construction made of IPE profiles - Surface of all components hot-dip galvanized - Load capacity per stand side 2,250 kg - Load capacity per cantilever arm 750 kg - Cantilever arms height adjustable in 100 mm increments - 6 screwable cantilever arms per stand and 2 base sections with a depth of 1,200 mm, standard = 4 storage levels one above the other per side of the stand - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. Iiedpfxsh Ek Das Apcea According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 3,000 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 3,000 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time Isdjmhh Anopfx Apceia - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm rack length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Rack height 4,160 mm Isdpfx Ajmhhf Sopcoia - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2024, Screw system in hot-dip galvanized design: Pick-up price: Sturdy steel construction made of IPE profiles Shelf height 3500 mm Iodpfx Aemhhl Hspcjia Load capacity per upright 2100 kg Foot section 1200 mm usable depth Cantilever arms height-adjustable in 100 mm increments 3 screw-on cantilever arms per upright Usable depth 1200 mm, standard (= 4 levels) Load capacity per cantilever arm 700 kg Including longitudinal and diagonal bracing Including fastening material (without ground anchors) With assembly instructions and load plates C4 according to DIN standard

Condition: like new (used), Year of construction: 2024, Cantilever rack in painted version (RAL 7016 anthracite): Scope of delivery: 4 rack uprights, height 4,200 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth Longitudinal and diagonal struts for 1,300 mm rack axis spacing (4,000 mm rack length) Fastening material (screws, nuts and washers) - (*No paint damage!) - (*No damaged components!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 racks in stock) Net price: €1,990.00 plus VAT Iodsmidyfepfx Apcoia Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface painted in RAL 5010 (gentian blue) - Rack height 4,200 mm - Load capacity per stand 2,200 kg - Base and cantilever arms with 1,200 mm usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 730 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. Delivery can take place in approx. 1 - 2 weeks after receipt of the order. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-compatible and must be able to bear the loads. The customer must check and ensure that the soil condition and load-bearing capacity as well as any official permits that may be required are obtained. The shelf supports must be anchored to the ground on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm from the top edge of the stand.

Condition: like new (used), Year of construction: 2024, Cantilever rack double-sided used: Hot-dip galvanized screw system Scope of delivery: 4 double-sided shelf uprights, height 3,500 mm with foot parts each 1,200 mm 24 cantilevers with 1,200 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles - Surface of all components hot-dip galvanized - Load capacity per upright side 2,250 kg - Load capacity per cantilever arm 750 kg - Cantilever arms height adjustable in 100 mm increments - 6 screwable cantilevers per upright and 2 foot parts with a depth of 1,200 mm, standard = 4 storage levels one above the other per stand side - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard Iijdpfjmkixwex Apcja - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm shelf length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Shelf height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone Iisdpfemhh Dtox Apcoa - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: refurbished (used), functionality: fully functional, total width: 800 mm, total length: 1,100 mm, total height: 1,100 mm, bending angle (max.): 360 °, overall weight: 600 kg, We offer this refurbished Peddinghaus Perfekt 32 KA or 32 PA rebar bending machine, year of manufacture unknown. Manufacturer: Peddinghaus Model: Perfekt 32 KA/PA PLA Serial number: 350114786/01 Iedpsyxc Smsfx Apcoia If you have any questions or require further information, please feel free to send us a message or give us a call.

Condition: excellent (used), For sale: Professional measuring set from the Japanese company Mitutoyo, model SBM-25CXST (cat. no. 568-925). This set is designed for precision measurement of hole diameters and cylindrical parts in the range from 12 to 25 mm. Set contents: Mitutoyo ABSOLUTE Digimatic digital bore gauge with LCD display; Three measuring heads: 12–16 mm, 16–20 mm, 20–25 mm; Setting rings: Mitutoyo 19.997 mm and HK66 19.001 mm; Extension rods and additional accessories; Original Mitutoyo wooden case with custom foam insert. The ABSOLUTE system ensures stable measurements and no need for re-zeroing every time the device is switched on. Digital readout provides quick and reliable measurements with high accuracy. The set is in very good condition, complete and ready for use. Ideal for measurement laboratories, quality control, and tool workshops. Iiedew R E Hvjpfx Apcja

Condition: like new (used), functionality: fully functional, Year of construction: 2017, operating hours: 3,427 h, load capacity: 5,000 kg, lifting height: 6,000 mm, free lift: 2,850 mm, load center: 600 mm, fuel type: gas, mast type: duplex, construction height: 3,850 mm, motor manufacturer: G.M., gearing type: hydrostat, fork carriage width: 1,380 mm, fork length: 1,500 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: superelastic tires (black), front tire size: 3X10-12, rear tire type: superelastic tires (black), rear tire size: 28X12,5-15, overall weight: 12,200 kg, empty load weight: 7,200 kg, total height: 2,550 mm, total length: 2,500 mm, total width: 2,250 mm, color: yellow, Equipment: CE marking, all wheel drive, cabin, lighting, pallet forks, sideshift, 🚜 USED FORKLIFTS WITH QUALITY GUARANTEE – FT LOGISTICS 🚛 Years of Experience | In-house Service & Paint Shop | Professional Consulting | Own Transport | After-Sales Support Looking for a forklift you can truly rely on? We are a renowned dealer of new and used forklifts with a long-standing tradition. Serving customers all across Europe – from small businesses to international industrial plants – we deliver more than machines: we deliver confidence that your logistics will run smoothly and reliably. 🌟 What Makes Us Stand Out? ✅ Every forklift undergoes a complete technical overhaul (inspection, testing, oil & filter replacement, refurbishment of key components) ✅ Optional UDT safety inspection on request ✅ Own paint shop & service workshop – forklifts perfected in both looks and performance Iisdoyy Dz Sspfx Apcsa ✅ European-wide transport handled by our own fleet and trained drivers ✅ Operator training upon delivery + machine functionality test at your site ✅ Full after-sales technical support – we’re here for you even after the deal is done ✅ See & test the machine at our headquarters – we welcome you! ✅ Hundreds of satisfied customers across Europe – join those who already trust us ✅ Financing support – we work with most leasing providers ✅ Invoice in EUR or PLN – according to your preference 📦 AVAILABLE NOW: COMBILIFT C5000XL – 4-Way Multi-Directional Forklift ✅ Year: 2017 ✅ Hours: 3,479 mth ✅ Drive: GAS ✅ Capacity: 5,000 kg ✅ Mast: Duplex – 6,000 mm ✅ Fork Positioner: 1,380 mm | Forks: 1,500 mm ✅ Solid Rubber Tires – 100% condition ✅ Free Lift: 2,850 mm ✅ Technical Condition: Excellent – fully serviced ✅ Visual Condition: Clean, no rust, ready to work 📏 Dimensions: Height: 2,550 mm Length: 2,500 mm Width: 2,250 mm Fork Positioner Width: 1,380 mm Overall Height: 3,850 mm 🏭 Perfect For: Warehouses with narrow aisles Wood, steel, and tube industries Handling long loads Indoor & outdoor operations 🔧 FT LOGISTICS – Quality You Can Rely On. Service You Can Trust.

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, operating hours: 4,263 h, load capacity: 5,000 kg, lifting height: 6,000 mm, free lift: 2,700 mm, load center: 600 mm, fuel type: gas, mast type: duplex, construction height: 3,900 mm, motor manufacturer: G.M., gearing type: hydrostat, fork carriage width: 1,380 mm, fork length: 1,500 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: superelastic tires (black), front tire size: 23X10-12, rear tire type: superelastic tires (black), rear tire size: 355/50-15, overall weight: 12,200 kg, empty load weight: 7,200 kg, total height: 2,600 mm, total length: 2,500 mm, total width: 2,250 mm, color: yellow, Equipment: CE marking, all wheel drive, cabin, lighting, pallet forks, sideshift, -- USED FORKLIFTS WITH QUALITY GUARANTEE – FT LOGISTICS -- 🌍 Years of experience | 🛠️ In-house service and paint shop | 🤝 Professional consulting | 🚛 Own transport fleet | 🔧 After-sales support Looking for a forklift you can rely on? We are a trusted dealer of new and used forklifts with years of industry experience. We supply clients across Europe — from small businesses to large international manufacturing plants. Our forklifts are more than just machines — they’re a guarantee of smooth and reliable logistics for your operations. What sets us apart? ✔️ Every forklift undergoes a comprehensive technical inspection (servicing, testing, replacement of filters and oils, refurbishment of key components) 📑 Optional full UDT certification on request 🎨 In-house paint shop and service workshop — forklifts refined both visually and technically 🚛 Europe-wide transport — handled by our own fleet and trained drivers 🎓 Operator training on delivery + functional testing at the customer site 🔧 After-sales service and technical support — we’re here for you even after the purchase 👀 Viewing and test drives available at our headquarters — you’re welcome 🌟 Hundreds of satisfied customers all over Europe — join those who already trust us 💰 Financing support — we work with most leasing companies 💳 Invoice in EUR or PLN — as you prefer OFFERED FOR SALE: COMBILIFT C5000 – Four-way forklift / multidirectional forklift / four-directional drive forklift / multidirectional drive forklift 📅 Year of manufacture: 07/2017 ⏱️ Operating hours: 4,263 h Iodpjyypcuefx Apcoia 🔋 Fuel: LPG 🏋️ Load capacity: 5,000 kg 📦 Mast: Triplex – 6,000 mm 📏 Free lift: 2,700 mm 🔩 Fork positioner | Forks 1,500 / 150 / 50 mm 🛞 Superelastic tyres: front 23x10-12, rear 355/50-15 ✅ Technical condition: Excellent – after major service ✨ Visual condition: Well-maintained, corrosion-free, ready for use DIMENSIONS: 📐 Forklift height: 2,600 mm 📏 Overall height (with mast): 3,900 mm ⬆️ Lifting height: 6,000 mm 📦 Overall length: 2,500 mm ↔️ Width: 2,250 mm ⚖️ Weight: 7,200 kg IDEAL FOR: 🏭 Warehouses with narrow aisles 🌲 Timber, steel, and tube industries 📏 Handling of long loads 🏢 Indoor and outdoor operations FT Logistics – Quality we stand behind. Service you can trust.

Condition: excellent (used), Screening and sorting machine for bulk materials or small metal components. Very good condition – complete, equipped with original drive, control cabinet, and a set of calibration screens. • Manufacturer: SCHWANOG Günter KG, Villingen / Schwarzwald • Model: RAPID SBM 63G • Year of manufacture: 1972 • Drive: Bauknecht motor 0.55 kW, 380/220 V, 2850 rpm • Control cabinet: Carl Kurt Walther GmbH, Wuppertal • Robust steel construction, stable frame with transport wheels • Power supply: three-phase 400 V • Complete set of screening sieves in wooden frames (numbers 1–6) • Sieve mesh range: from 2 mm to 15 mm • Adjustable and exchangeable screens • Main switch, start/stop controls, and overload protection • Very good condition – dismantled from the plant, mechanically fully functional The machine is ready for operation after a basic inspection. Ideal for: metalworking shops, foundries, industrial laboratories, sorting granulates, sand, or components. Iiedpfx Aexmt Eqepcea

Condition: excellent (used), For sale: robust mounting plate/machine table with T-slots. Constructed from thick-walled steel, painted blue. Excellent base for installing large components, fixtures, or for measuring and machining applications. • Dimensions: 2570 x 770 x 200 mm • Surface with T-slots • Precisely machined top section • Weight: 900 kg • Can be transported or loaded by forklift Isdpfx Asw Rdtuepcjia

Condition: ready for operation (used), Pressure force: 10 tons Projection: 110 mm Required space: 300 x 170 x 680 mm Isdpfxjhtq Hfj Apcjia Weight: 32kg

Condition: used, for sheet thickness up to: 7 mm blade length: 175 mm Round material up to: 20 mm square material up to: 18 mm Iisdpfx Ajdp U Apopcoa space requirement: 1000 x 770 x 690 mm hand-guided

Condition: used, machine/vehicle number: PA 1107, flat steel capacity: 80 x 10 mm electrical connection: 380 V, 1,3 kW Isdoby Dq Ropfx Apcoia space needed: 1000 x 650 x 1480 mm weight: 400 kg

Condition: like new (used), Year of construction: 1995, Roller conveyor length: 6000 mm Rolls divided, total width: 280 mm Min.height: 630/760 mm Max.height: 1150/1300 mm Difference between the height information given by rollers and the transverse movement Isdpjgyk A Dofx Apcoia Weight: 625 kg

Condition: good (used), for sheet thickness up to: 8 mm flat iron: 80 x 12 mm Iisdstx Uqaepfx Apcsa square iron: 20 mm round iron: 18 mm weight approx.: 88 kg space required: 620 x 250 x 380/880 mm high (with/without base frame)

Condition: good (used), for sheets up to: 5 mm Iiedpfx Ajdyunpjpcja Flat iron: 70 x 6 mm Rods: 11 mm Space: 330 x 120 x 1250 (incl. handle) mm high

Year of construction: 2025, condition: new, Ultrasonic bath UEC 300 is industrial solution for cleaning large and heavy parts that are very dirty. The machines contain a pneumatic elevator capacity of 200 kg. Working frequency is 28kHz with sweep technology. The machine consists of a main ultrasonic bath with three side ultrasonic piezo transducers and second, overhead bath with oil separator. Control is with high quality touch screen HMI with 3D display notifications. Complete bath is made from acid resistance stainless steel AISI304 thickness 2mm. ----- Characteristics : Platform size : 900x570mm Maximum load : 200 kg. Useful height : 400mm Ultrasonic power : 3kW(6kWp-p) Ultrasonic frequency 28 kHz with sweep mode Heater power : 9kW FEATURES : Touch screen 7 " with 3D notification Iedpegd Uifofx Apcjia Automatic water filling system. Automatic elevator mode work Level sensor Elevator position sensors Cover sensor Warranty : 2 years. WE HAVE AND OTHER MODELS ON STACK

Condition: used, Year of construction: 1985, machine/vehicle number: 5801, Plate drilling and burning machine FDB 600, The Peddinghaus FDB 600 plate processor from the Peddimat product range is suitable for automated drilling and oxy-fuel flame cutting of flat steel and steel sheets in steel construction. CNC control SIEMENS SINUMERIC drill diameter: min ø 8, max. ø 40 mm, inner coolant drilling system Number of drilling agregates:3 pcs. Cutting system: Autogen burning equipment total power requirement: 30 kW Iisdpfsibq Itex Apcoa max. workpiece height: 600 x 50 x 6000 mm Min. material size: 80 x 8 mm sheet thickness - min.:6 mm sheet thickness - max.:50 mm dimensions of the machine ca.:2,4 x 2,4 x 2,8 m Lead roller conveyor: 6 m Outside roller conveyor: 1 m weight of the machine ca.: 6,5 t

Condition: used, Professional granite surface plate – renowned quality by Mitutoyo / Planolith (Made in Germany). Ideal for use in quality control, tool shops, and metrology. ⸻ Specifications: • Plate dimensions: approx. 1200 x 800 mm • Thickness: approx. 170 mm • Weight: approx. 460 kg • Accuracy class: DIN 876/0 (high precision) • Permissible deviation: 0.009 mm • Actual deviation: 0.00273 mm • Manufacturer: Planolith GmbH / Mitutoyo • Country of manufacture: Germany • Includes: solid steel stand ⸻ Advantages: Very high measurement accuracy Stable construction – heavy granite dampens vibrations Iiodpeyw Ubqefx Apcoa Ideal for measurements, marking out, and component inspection Professional equipment Ready for use ⸻ Condition: Used item – shows normal signs of wear (scratches visible on the surface), but is fully functional and maintains its specification parameters.

Condition: used, Punching Machine MUHR & BENDER - MUBEA Type KL 350 / 203 Machine No. Year of manufacture 19 Punching force 35 tons Throat depth 203 mm Ram stroke 22 mm Capacity Ø 28 mm in 10 mm sheet (at 450 N/mm²) Ø 23 mm in 12 mm sheet (at 450 N/mm²) Ram plate 117 x 70 mm Table plate 175 x 100 mm, thickness 100 mm Iijdpfoyvvkwex Apcea Drop-through opening in table cutout Ø 56 mm Stroke release Single stroke via foot switch Motor power 1.5 kW Power supply 400 Volt, 50 Hz - Electric foot switch for stroke release - Manual lever positioning device for punch movement - Equipped with a Ø 8 mm punching tool - Support tables approx. 270 x 230 mm each on left and right of punching unit - Metal base frame Space requirement L x W x H 750 x 720 x 1500 mm Weight 430 kg In very good condition

Condition: used, Year of construction: 1985, round bar steel 40 mm square edge steel 40 mm L-beam 120 x 12 mm Punch power 600 kN hole punching press: throat 400 mm hole punching press: max. length of stroke 32 mm hole punching press: capacity (dia. x thick.) 30 x15 mm Iiedsydqn Sjpfx Apcsa hole punching press: capacity (dia. x thick.) 20 x 20 mm notching: l + T material 80 x 10 mm no. of strokes 40 / 46 Hub/min shear: flat material 150 x 15 mm shear: length of knifes 275 mm total power requirement 3 kW weight of the machine ca. 2,9 t dimensions of machine L x W x H 2,18 x 0,83 x 2,15 m Accessories: tool cabinet with various punches and dies, length stop

Condition: new, Year of construction: 2024, color: orange, overall weight: 15,000 kg, maximum load weight: 13,390 kg, empty load weight: 1,610 kg, loading space width: 2,550 mm, loading space length: 6,000 mm, loading space height: 1 mm, gearing type: other, driver cabin: other, Vehicle location: Bovenden, lashing rings Body: roll-off platform, pickup height approx. 1420 mm! Isdpfxoyhc Aps Apcoia Accessory information without guarantee, subject to changes, prior sale, and errors!