Used Network for sale (815)

Condition: ready for operation (used), Year of construction: 2019, travel distance X-axis: 1,016 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 635 mm, controller manufacturer: HAAS, table load: 1,814 kg, overall weight: 7,485 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 44,700 W, number of slots in tool magazine: 30, number of axes: 3, This 3-axis HAAS VF-3YT/50 was manufactured in 2019. It features an impressive X-axis travel of 1,016 mm, Y-axis travel of 660 mm, and Z-axis travel of 635 mm. The machine is equipped with a high-performance spindle capable of 10,000 rpm and a 30-position automatic tool changer. If you are looking to get high-quality machining capabilities, consider the HAAS VF-3YT/50 vertical machining centre we have for sale. Contact us for further details. • Condition: Used, fully operational • Operating/cycle hours: 6,744 h • Spindle/cutting hours: 4,454 hTravels • Spindle nose to table: 201–836 mm • Rapid traverse: 18 m/min • Maximum cutting feed: 12.7 m/minSpindle and tool changer • Maximum torque: 460 Nm • Drive system: Vector drive with 2-speed gearbox • Tool changer capacity: 30 toolsTable • Table size: 1,372 × 610 mm • T-slots: 7 • T-slot width: 15.9–16 mmShipping • Note: Dimensions listed as 1,370 × 660 × 630 mm are not overall machine dimensions • Export shipping dimensions (approx.): 3,970 × 2,600 × 3,230 mm • Approx. shipping weight: 7,485 kg Additional equipment • Chip conveyor with four additional augers • Haas Chip Lift • Through-Spindle Coolant (TSC), 300 psi / 21 bar • Programmable coolant nozzle • Coolant chiller • ACF 25-micron auxiliary coolant filter • Coolant mist condenser • Minimum Quantity Lubrication (MQL) • Automatic air gun • Through-Tool Air Blast (TAB) • PulseJet system • Renishaw Wireless Intuitive Probing System (WIPS) with probe riser block • Fourth-axis drive and wiring • High-Speed Machining (HSM) • DWO/TCPC (Dynamic Work Offsets/Tool Center Point Control) • RTAP-3 synchronized tapping • Wi‑Fi network connection and Wi‑Fi camera • Automatic door • High-intensity lighting • Approximately 15 tool holders • Complete documentation Nsdpfezwd Ausx Ac Djlh Technical Specification Taper Size ISO 50

Condition: good (used), Year of construction: 2014, cutting range 300 mm capacity 90 degrees: flat 330 x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: round 260 mm capacity 45 degrees: flat 270 x 200 mm capacity 45 degrees: square 250 mm capacity 60 degrees: round 180 mm capacity 60 degrees: flat 170 x 170 mm capacity 60 degrees: square 180 mm automatic feeds 9999,9 mm feed minimum 2.0 mm cutting diameter minimum 5.0 mm band speed 15 - 100 m/min vice 340 mm Öffnung dimensions of saw-band 3650 x 27 x 0,9 mm Control MEP CNC total power requirement 2.2 kW weight 1240 kg range L-W-H 1800 x 1900 x 1750 mm actual NEW price about 23.000 Euro special price on request Equipment: - robust electro-hydraulic fully automatic band saw (INDUSTRY) - with additional semi-automatic function, for cuts from 0° to 60° left - WINDOWS “CE” based MEP 50 – control and 7” touch screen display * simple and quick setting of all machine parameters * with additional soft keys + backlit display * 10 programs, each with a maximum of 9999 pieces and . a maximum length of 9999.9 mm - material feed with stepper motor via ball screw * single stroke 600 mm repeatable to saw any length * accuracy of ± 0.1/600 mm - feeder with protective cover and safety limit switch - precise setting of the cutting feed with indication in mm/min - positioning of the saw head and movement of the feeder using a joystick - automatic detection of the start of the cut - large deflection discs, adjustable from cast steel Nedpjzkbn Usfx Ac Delh - Saw blade tension with blade tension control and display - Hard metal blade guides for maximum cutting precision - Automatic monitoring of the cutting load - Vice with quick adjustment * with interchangeable clamping and stop jaws - Large, laterally extendable chip tray and coolant container * equipped with 2 electric pumps for lubricating and cooling the saw blade * Coolant gun for cleaning the machine - Chip removal brush for cleaning the saw blade - Operating instructions DE Information from the manufacturer: When installing this saw in a network with a residual current device (FI), this should be universally current sensitive and not less than 300 mA.

Condition: used, mileage: 66,517 km, power: 107 kW (145.48 HP), first registration: 12/2020, fuel type: diesel, overall weight: 3,500 kg, tire size: 225/65R16C, wheelbase: 3,682 mm, fuel: diesel, color: white, gearing type: mechanical, Equipment: ABS, AdBlue, Bluetooth, air conditioning, airbag, central locking, cruise control, onboard computer, power assisted steering, soot filter, Special Features - ABS - Radio - Airbag - On-board computer - Power steering - Cruise control - Driver's seat with armrest - Electric windows - Electric immobilizer - Central locking with remote control - Reversing camera - Air conditioning - New diesel particulate filter (DPF) installed Construction Articulating boom lift Time Versalift ETL-32-115 - Working height: 11.3 m - Side reach: 6.1 m - Platform capacity: up to 120 kg - Rotation: 360° - Remote control - Engine start/stop function - Emergency pump - Hour meter - Flashing lights - 220V connection in the platform The Renault Master is equipped with a professional articulating boom lift of the Time Versalift ETL-32-115 type. The Versalift boom lift comes from a renowned brand within the global TIME Manufacturing Group, one of the world's largest manufacturers of boom lifts and aerial work platforms. Through the acquisition of the German company Ruthmann, Versalift has a comprehensive service network in Germany with professional technical support, spare parts supply and qualified customer service. This ensures reliable operation as well as quick and easy access to services for the future user. A major advantage of this boom lift is that it operates without outriggers. This allows for quick and easy deployment, especially when working at frequently changing locations. The design is very simple and robust. The boom lift features proven, straightforward technology without complicated electronics, which makes operation easier and keeps maintenance and repair costs low. The boom lift was mounted on a shortened chassis. This makes the vehicle more compact and maneuverable than comparable models and is particularly suitable for use in narrow streets and urban areas. All functions of the boom lift are fully operational and have been checked in our workshop. The vehicle is ready for registration. German vehicle documents, TÜV (Technical Inspection Association) and UVV (accident prevention regulations) inspection are included in the price. Additional equipment such as a tow hitch, lighting, shelving systems and other options are available on request. Available immediately from stock in Langenfeld! ACR-Juretzki Commercial Vehicle Trading GmbH – Your reliable partner for used commercial vehicles All vehicles offered by us are owned by ACR-Juretzki Commercial Vehicle Trading GmbH. The presentation is done exclusively with original photos, which were taken directly in our premises – this guarantees full transparency regarding the actual condition of the vehicle. Before the sale, our vehicles undergo a comprehensive refurbishment in our own specialist workshop – including mechanics, bodywork and paintwork. They are thus optimally prepared for the next technical inspection. In addition, we guarantee the authenticity of the stated mileage. Nledpfozcvadox Ac Dsh Trust is good – control is better: If desired, the vehicle can be inspected by independent testing organizations such as TÜV, DEKRA or KÜS – also as part of a remote inspection. Our service offer for you: Delivery of your vehicle to the location of your choice Complete processing of export formalities, including export license plates Individual financing and leasing offers Trade-in of your current vehicle Installation of special equipment on request

Condition: used, Year of construction: 2026, operating hours: 380 h, TECHNICAL SPECIFICATIONS KÄSSBOHRER POWERBULLY 18T WITH PALFINGER PK 23002 SH E POWER LINK PLUS Note: The vehicle is from the 2019/2020 production period. Acceptance/initial registration is from 2026. GENERAL DESIGN ? High-performance tracked vehicle for professional use in difficult terrain ? Vehicle built on a Kässbohrer PowerBully 18T chassis ? Equipped with a hydraulic PALFINGER loading crane PK 23002 SH E Power Link Plus ? Suitable for assembly, lifting and transport work in rough terrain ? Can be used on moorlands, forest paths, tracks, mountainous regions and nature reserves CHASSIS ? Manufacturer: Kässbohrer ? Type: PowerBully 18T ? Tracked vehicle with hydrostatic drive ? Cummins B6.7 turbocharged diesel engine ? Engine power: 231 kW (310 hp) ? Emission standard: EU Stage V ? Maximum speed: approx. 13 km/h ? Permissible total weight: 30,000 kg ? Low ground pressure due to wide rubber tracks ? Ability to turn on the spot OFF-ROAD CAPABILITIES ? Climbing ability up to 60 % ? Side slope up to 40 % ? Wading depth up to 1,400 mm ? High traction on soft and uneven surfaces ? Environmentally friendly operation on sensitive areas ? Optimal for work away from paved roads CAB ? Safety cab in ROPS/FOPS design ? Air conditioning ? Air-suspended comfort seat ? Electronic vehicle control ? Touchscreen control panel ? Reversing camera ? LED work lights ? GPS telemetry and fleet management system CRANE SYSTEM Manufacturer / Type ? PALFINGER PK 23002 SH E Power Link Plus ? Hydraulic knuckle boom loading crane ? Continuous slewing ring ? Hydraulic six-section boom Performance data ? Lifting moment 21.5 mt (215 kNm) ? Maximum lifting capacity approx. 6,200 kg ? Maximum hydraulic reach approx. 17.10 m ? Lifting capacity at maximum outreach approx. 890 kg ? Precise load positioning through sensitive hydraulic control Crane equipment ? PALCOM radio remote control ? PALTRONIC overload protection ? HPSC stability monitoring ? Active vibration damping ? Hydraulic winch ? Four-point outrigger system ? Additional hydraulic connections for attachments ? LED work lights on the crane AREAS OF APPLICATION ? Overhead power line and electricity pole construction ? Wind turbine service ? Pipeline and pipeline construction ? Telecommunications and radio mast construction ? Forestry operations Nsdpfx Aozdl R Hec Delh ? Work in moorlands and nature reserves ? Disaster control and rescue operations ? Assembly and lifting work in hard-to-reach terrain PARTICULAR ADVANTAGES ? Combination of a transport vehicle and a powerful loading crane ? Extremely low ground pressure for sensitive surfaces ? High payload combined with excellent off-road performance ? Safe operation even under the most difficult conditions ? Economical alternative to mobile cranes in rough terrain ? High flexibility for energy suppliers, network operators and specialist civil engineering companies SUMMARY The Kässbohrer PowerBully 18T with the mounted PALFINGER PK 23002 SH E Power Link Plus combines maximum off-road performance with powerful crane technology. Thanks to the extremely low ground pressure, high payload and a reach of over 17 meters, the machine is particularly suitable for lifting, assembly and transport tasks in areas that cannot be reached with conventional truck cranes or construction machinery.

Condition: repair required (used), functionality: limited functionality, machine/vehicle number: XLRASM4100G211313, mileage: 346,000 km, first registration: 10/2018, fuel type: diesel, empty load weight: 13,500 kg, maximum load weight: 12,500 kg, overall weight: 26,000 kg, tire size: 315/70 R 22.5, tire condition: 90 %, axle configuration: 6x2, wheelbase: 6,100 mm, next inspection (TÜV): 10/2026, fuel: diesel, energy efficiency: A, brakes: intarder, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6c, suspension: air, number of seats: 2, total length: 12,000 mm, total width: 2,600 mm, total height: 4,000 mm, loading space length: 9,420 mm, loading space width: 2,450 mm, Year of construction: 2018, Equipment: ABS, EBS, air conditioning, lane keeping assist, truck registration, VEHICLE WITH ELECTRICAL SYSTEM ISSUES PLEASE READ THE DESCRIPTION CAREFULLY VEHICLE IS RUNNING AND CAN BE DRIVEN, BUT PERFORMANCE IS LIMITED DUE TO A SAFETY FEATURE – THE TAILGATE AND REFRIGERATION UNIT ARE FUNCTIONAL. FOR FURTHER INFORMATION, PLEASE CALL OUR OFFICE. MAKE: DAF TYPE: ISOTHERMAL BOX BODY WITH REFRIGERATION UNIT AND REAR TAILGATE MODEL: CF 450 REGISTRATION DATE: 10/2018 MILEAGE: 346,000 KM Njdszycadopfx Ac Dolh POWER (HP/KW): 450 HP EMISSION STANDARD: Euro 6 CONDITION: Used ITEM CODE: 76325 VALID INSPECTION UNTIL: 10/31/2026 – EXPORT POSSIBLE EQUIPMENT: IDEALCAR FRC CLASS ISOTHERMAL BOX BODY WITH INTERNAL SLIDING PARTITION – CARRIER SUPRA 950 REFRIGERATION UNIT, ROAD AND NETWORK, MOUNTED UNDER THE CHASSIS – SIDE DOOR + REAR DOORS ATP FRC EXPIRATION DATE: 08/2027 – ANTEO RETRACTABLE TAILGATE, CAPACITY 2200 KG – SINGLE OWNER 3RD STEERABLE AND LIFTING AXLE ALL VEHICLES FOR SALE CAN BE INSPECTED AND TESTED. OUR SALES TEAM IS AVAILABLE FROM MONDAY TO FRIDAY FROM 8:30 AM TO 6:00 PM AND ON SATURDAY FROM 8:00 AM TO 12:00 PM. TO REACH US BY CAR, TAKE THE A31 MOTORWAY AND EXIT AT THIENE. BY TRAIN, GET OFF AT THE THIENE TRAIN STATION. Dealer: Trucks Italiana srl

Condition: used, Year of construction: 2025, New demonstration machine! Price on request! The CONTROL has always defined its own class – the premium class for vertical panel saws. But even this leading position doesn't stand still. We have developed the CONTROL into the premium class's vertical cutting center, with increased automation of the sawing process and additional equipment options. Above all, the 12" touchscreen computer and the new machine software ensure improved ease of operation in every detail. Saw frame: • Machine components manufactured to a precision of 1/100 mm • Solid, self-supporting, firmly welded, and torsion-resistant saw frame • Full-surface support table made of birch plywood with integrated small parts support • Auxiliary fence profile with its own measuring tape and 3 auxiliary stops for repeat cuts • Automatic detection of the center support • Automatic roller locking during the sawing process Saw beam: • Stable, durable saw beam steel construction • Automatic saw beam locking with cutting interface detection Saw unit: • Backlash-free, smooth-running guides • Robust mounting of the motor carriage ensures high cutting accuracy • Powerful, high-torque 5.5 kW motor (7.5 HP) • More comfort thanks to largely automated operation • Laser-assisted display of the horizontal cut • Automatic motor carriage clamping • Automatic lowering and pivoting of the saw motor • Pneumatic clutch for easy switching to manual operation • SUPERSILENT sound insulation to reduce saw blade noise • Electromagnetic motor brake Control: • 12" touchscreen computer with optimal user guidance • Multilingual user guidance • Tool database guarantees high flexibility and absolute repeatability • Fully automatic sawing process • Infinitely variable feed speeds 10-25 m/min • Selectable sawing cycle • Panel end detection • Constant return speed • Operating hour counter • Network connection • UPS 24VDC for touch PC (uninterruptible power supply) Dimension setting: • Digital measuring system DMS.x (horizontal axis for vertical cuts) • Electronic positioning system EPS.y including ABO (vertical axis for horizontal cuts) Mounting: • Wall or free-standing mounting possible Saw blade: 300 mm, scoring saw, 60 teeth Cutting range: L: 5300 x Hvert: 2240 / Hhor: 2100 x T: 80 mm, consisting of: 1.00 Cutting interface distance vertical 1000 mm 1.00 Language documentation DE 1.00 Saw motor 1-phase, 400V, 50Hz, EVO/CON 1.00 Feed speed 10-25 m/min 1.00 Scoring saw unit VSA (scoring saw infinitely adjustable) 4.00 Free-standing support, complete 1.00 Small parts support, aluminum, complete (2-part) 1.00 STRIEBIG ExpertCut CON consisting of: - Electronic positioning system EPS-X - Automatic saw beam positioning ASP - User guidance with STRIEBIG ExpertCut software license for 1 office workstation (network license) - Label printer - Network connection - Operating manual - Paper holder 1.00 UPS 24VDC for touch PC (uninterruptible power supply) 1.00 Block parts, initial license 1.00 Service: data import / label layout (remote) 1.00 Basic training STRIEBIG cutting optimization (online training) Nodpfx Acozx E T Do Dslh Storage location: Rieth

Condition: used, Year of construction: 2018, Overview This compact automated can filling line was manufactured with main equipment from KHS, Ferrum, Ska Fabricating and Atlanta. The line is designed for beverage can production and includes depalletizing, can transport, ionized air rinsing, filling, seaming and downstream film / shrink packaging. The core of the line consists of a KHS Innofill Can C filling system combined with a Ferrum FC03 can seamer. The system is integrated with overhead and floor-mounted can conveyors and is arranged in a compact production layout. Technical Data - Manufacturer / main equipment: KHS / Ferrum / Ska Fabricating / Atlanta - Line type: Automated can filling line - capacity: 15.000/h Nedpfx Acey Tt H Dj Delh - Number of filling valves: 21 - Number of seaming heads: 3 - Container type: 330ml, 440ml, 500ml standard can - Packaging type: loose cans into 12 & 24 trays and WA boxes - Year: 2018 - Operating hours: 3,446 h - Layout: compact canning line layout with overhead and floor-mounted conveyor sections Scope of Delivery - Can Depalletizer | Ska Fabricating Co. | – | Enclosed depalletizing system with safety guarding | 2018 - Can Conveyor System | KHS / AE | – | Overhead and floor-mounted conveyor network for empty cans and line transfer | 2018 - Ionized Air Rinser | Ska Fabricating Co. | AV-C500 | Empty can rinsing / cleaning module before filling | 2018 - Can Filler | KHS | Innofill Can C | Automated can filling system | 2018 - Fill level detection | Heuft | - - Can Seamer | Ferrum | FC03 | Rotary can seaming unit | 2018 - Can dryer | Air control industries | 2018 - Labeller | Pack Leader Advanced Dynamics | Pro-516 | Labelling machine incl. roller feed | 2018 - Case Packer | Atlanta | Rafaello 726 | packaging system | 2018 - Case Packer Printer | SATO | S86-EX | 2018

Condition: new, The ideal addition to your grinding/deburring machine (we also have the suitable deburring machine in stock!): Ulmatec Wet Separator Extracted materials: steel / stainless steel / aluminium, dry dust All water-contact parts made of stainless steel. Control via display. Motor: 7.5 kW, 400 V, 50 Hz, IE3 Max. airflow: approx. 11,000 m³/h Max. negative pressure: approx. 4,000 Pa Inlet diameter: Ø 355 mm Nsdpox Diiasfx Ac Dolh Discharge: Drain valve Filling: Automatic via solenoid valve Included: HEPA post-filter (for stainless steel processing) ATEX version (e.g. for aluminium processing) Excluding piping Maximum distance between extraction unit and machine: 10 m Connection to the on-site supply network is to be carried out by the customer.

Condition: excellent (used), ATLAS COPCO GA 110+ FF Screw Air Compressor ATLAS COPCO GA 110+ FF industrial screw air compressor, designed for the continuous and efficient production of compressed air in industrial facilities with high and constant demand. The GA series from Atlas Copco uses lubricated rotary screw technology, especially suitable for industrial applications where a reliable supply of compressed air is required for long operating periods. This unit corresponds to the FF (Full Feature) version, a configuration that integrates compressed air treatment within the unit itself, providing a compact solution for air generation and conditioning. MAIN FEATURES -Manufacturer: ATLAS COPCO -Model: GA 110+ FF -Type: Rotary screw air compressor -Configuration: Full Feature (FF) -Nominal power associated with the model: 110 kW -Continuous compressed air production -Lubricated rotary screw technology -Integrated cooling system -Air dryer integrated in the FF configuration -Condensate separation -Air filtration and treatment system -Electronic control via display / integrated controller -Monitoring of operating parameters -Complete, soundproof enclosure -Compact, packaged design -Robust construction for continuous industrial operation -Direct connection to compressed air networks -Access via panels for maintenance OPERATION Atmospheric air is drawn into the compressor and directed to the screw element, where two rotors progressively compress the air until it reaches the established working pressure. Subsequently, the necessary stages of oil separation, cooling, and air conditioning are carried out. In this GA 110+ FF version, the integrated dryer reduces the humidity present in the compressed air before it is fed into the factory network, eliminating the need to install a separate dryer in many configurations. The system can supply a general compressed air network intended for: -Pneumatic actuators and cylinders -Automatic valves Nodownxziepfx Ac Dolh -Filling and packaging equipment -Process machinery -Pneumatic transport systems -Instrumentation -Air-powered cleaning equipment -Automatic production lines APPLICATIONS Especially suitable for food processing plants, beverage factories, canning factories, packaging facilities, and other industries with a significant demand for compressed air. The combination of ATLAS COPCO, screw technology, 110 kW power, and Full Feature configuration provides a centralized solution for the supply of compressed air in industrial facilities. Machine available for inspection. Additional technical information, working pressure, flow rate, operating hours, dimensions, additional photographs, or videos can be provided upon request.

Condition: new, Year of construction: 2026, Comparable to: e.g. Emmegi Double mitre saw for steel Cutting length: 5,000 mm Equipped with 7 NC axes for length positioning, outward and inward saw blade inclination, saw blade feed, and saw motor speed control Torsion-free welded construction with longitudinal linear guideways 2 x saw motors, each 4.5 kW Saw blade speed: 0–250 rpm Saw feed motorized from rear to front Feed speed infinitely adjustable Motorized angle adjustment between 135° and 45° Suitable for HSS circular saw blades, Ø 400 mm Pneumatic protective covers Water cooling with pump and coolant tank Left saw unit fixed to the base frame, right unit motorized and traversable Positioning accuracy: ± 0.15 mm Max. traverse speed: 25 m/min Length positioning compensates for saw angles and profile height Each saw head fitted with three horizontal and vertical profile clamps; in the event of pressure loss, the horizontal cylinders remain clamped Pneumatically swivelable material support between the saw heads Nlodpfx Ajyinu Hsc Dsh 15” touchscreen Single cut processing Processing of cutting lists Creation of cutting lists via keyboard Import of cutting lists via USB flash drive or network interface Corner cutting Overlength cutting Short cuts from 5 mm cutting length Crosscuts Available options: Micro-spraying unit Saw head inward inclination increased to 150° Label printer Barcode scanner Additional network interface and teleservice agreement

Condition: new, Year of construction: 2022, feed pressure 10.0 bar Effective free air delivery 1.950 L/min motor 400 V 0 250 Liter weight of the machine ca. 467 kg. total power requirement 15.0 kW range L-W-H 1915 x 650 x 1640 mm Exhibition machine / not yet in use new BOGE SOLID model series ~ List price : 13.576 euros / special price on request Made in Germany Furnishing: - with container and dryer / can be used immediately - Microprocessor control SOLID base control - Network pressure sensor - Belt driven drive system Nodpfsw U U Scsx Ac Djlh - low compressed air temperature due to effective aftercooler - lying underneath compressed air tank - including cold compressed air dryer * automatically working with pre- and post-filter ( mounted ) (also available with 7.5 bar)

Condition: new, cutting diameter 305 mm capacity 90 degrees: flat 350 x 200 mm capacity 90 degrees: square 260 mm capacity 45 degrees: flat 230 x 200 mm capacity 45 degrees: round 250 mm capacity 45 degrees: square 230 mm capacity 60 degrees: flat 170 x 100 mm capacity 60 degrees: square 155 mm capacity 60 degrees: round 175 mm turning speed range: 18 – 110 m/min dimensions of saw-band 3.375 x 27 x 0,90 mm work height max. 880 mm total power requirement 1,5 / 1,8 kW weight of the machine ca. 840 kg dimensions of the machine ca. 1.900 x 1.850 x 2000 mm Furnishing : - miter left 45 ° automatic operation - miter left 60 ° semi-automatic operation (cuts without programming) - Material height sensor (automatic cut start detection) - Frame and gear from a single source - very quiet cut and very low vibration - Chip tray can be removed (disinfection) - Shockproof and ergonomic control panel with oil-proof EPDM cover - Easy access to the saw, material and feed unit - Foldable safety cover - Fine adjustment of the feed rate - semi-automatic cut BERG SCHMID CNC control: - Possibility to enter various parameters such as number of pieces and material length, automatic calculation of the cutting channel - for 10 different sawing programs, with 99 sub-programs - for different lengths and quantities Njdpfjxabacsx Ac Delh e.g. 1x cutting program with various cut lengths - Incremental feed with automatic length compensation - Adjustable for cut lengths from 2 mm to 9,999 mm, remaining piece length 170 mm - Single stroke - feed slide 500 mm Info from the manufacturer: When installing this saw in the network with Residual current circuit breaker (FI) should this universal current sensitive and not below 300 mA be executed.

Condition: used, Year of construction: 2016, Technical details: turning diameter: 26 mm Nsdpfx Acewbgcns Dslh Article: High-precision CNC lathe with linear cross slide Manufacturer: Benzinger Type: GOFuture B1 Yob: 2016 Machine was only used for reworking, i.e. only light machining work was carried out! Control: Siemens Sinumerik 840Dsl Main spindle: maintenance-free motor spindle Bar capacity: D26mm Loading and unloading device type IB Additional gripper system for placing the workpieces in the correct position on the unloading belt Coaxial valve for coolant to the linear tools (3 pieces) Internal clamping device C-axis main spindle for digital control incl. transmit function Adjusting microscope 16x magnification Coolant supply through the spindle clamping cylinder, Sealing air, Speed increase of the motor spindle to 8. 0000 rpm Nordmann tool monitoring Profibus master interface Hinged belt conveyor Knoll Compact coolant device Knoll MBE interface Small fire extinguishing system Kraft & Bauer Network interface for teleservice A total of 2 similar machines are available - package sale possible Please, contact us for getting more information and pictures on mail(at) or subject to sale and mistakes *

Condition: used, functionality: fully functional, Year of construction: 2007, operating hours: 22,372 h, laser hours: 11,345 h, laser power: 4,000 W, sheet thickness steel (max.): 20 mm, sheet thickness aluminum (max.): 8 mm, overall weight: 16,000 kg, total length: 11,600 mm, total width: 5,200 mm, total height: 2,200 mm, working range: 40,002,000 mm, Equipment: cooling unit, Standard Features: • Enclosed machine frame with integrated laser unit • Laser unit: TruFlow 2000 CO₂ laser with high-frequency excitation, maintenance-free turboradial blower, reflector telescope, cooling unit, logbook function • Automatic pallet changer • Longitudinal conveyor belt for small parts/waste • Drive: Maintenance-free three-phase servo motors • Cutting head quick-change device Laser cutting head with 5" lens and laser cutting head with 7.5" lens • Programmable cutting gas pressure setting • ControlLine capacitive height control and process control • Automatic focus adjustment with FocusLinePlus • Laser power control Njdpfxev Sm Ruo Ac Djlh • Positioning laser • NitroLine high-pressure cutting • Fast processing with SprintLine • Automatic production of smaller holes • PlasmaLine plasma sensors • Automatic sheet metal surface and edge detection • Programmable Performance cycles • Microweld • Spray device for safe thick sheet processing • Automatic blow-off system • Residual heat extraction • Sinumerik 840D control system: Open PC-based control, easy operation, online help, integrated e-shop, diagnostic functions, maintenance logbook, technology data, teleservice • TruTops Laser lite workshop programming Safety: • Multi-beam light barriers, fully encapsulated and ventilated beam guidance, monitoring system, multi-chamber extraction and compact dust extractor, protective cabin • RJ45 network connection via installation via teleservice • 3.5" floppy disk drive • TFT color display More powerful lasers: • TruFlow 4000, including NitroLine Plus, nitrogen beam tube ventilation and lens monitoring sensors Extended machine equipment: • PierceLine Process Control System • A total of 2 Machine auxiliary pallets, structural steel webs • Crane-mounted traverse for manual pallet handling • Pneumatic cutting

Condition: ready for operation (used), Year of construction: 2019, spindle motor power: 13,000 W, spindle speed (max.): 6,300 rpm, travel distance X-axis: 160 mm, travel distance Z-axis: 510 mm, number of axes: 3, This EMCO E45 turn-mill centre was manufactured in 2019. It features a KK5 spindle with a bar capacity of 45 mm and a speed range up to 6300 rpm. The 12-position VDI30 tool turret supports 6 driven tools, enhancing versatility. Equipped with SINUMERIK 828D OPERATE control for precise operations and a robust design with a chip conveyor and high-pressure coolant system. Reach out for more information about this machine. • Connection: KK5 (DIN 55026) • Bar capacity: 45 mm • Drive power: 13 kW • Speed range: 0–6300 rpm • C-axis on main spindleTool turret • 12-position VDI30 axial • Directional logic for up to 6 driven tools • Driven tools: max. 4 kW / max. 16 Nm • Driven tools speed: 0–5000 rpmTailstock • Programmable, hydraulically actuated Njdpfoyffgrox Ac Delh • Max. clamping force: 6000 N • Morse taper: MK4 • Hollow clamping cylinder incl. draw tubeControl & software • SINUMERIK 828D OPERATE • SHOPTURN dialog programming • USB interface • Network / Ethernet • 10.4" TFT color monitor • 3D simulationMedia & machine features • Machine light • Coolant system incl. pump (3.5 bar) • Hydraulic unit • Chip conveyor interface • CE certificate • DocumentationTool measurement (E45) • Measuring arm fixed in the work area • Tool measurement on the turret • Short setup times / precise measurement / cost-efficientWorkpiece clamping • 3-jaw chuck KK5 • Max. speed: 6300 rpm • Diameter: 20 mm • Soft + hard jawsOther (machine-related) • Water gun • Air to spindle • Oil/coolant separator • Automatic coolant monitoring • Electronic handwheel • Tool change guard • Hydraulic connections • Pneumatic connections • Machine packaging: pallet + roll-up cover Additional equipment Bar feeder / magazine (SL1200 – as referenced) • Bar length: 850–1200 mm • Bar diameter: Ø 8–95 mm • Max. feed rate: 60 m/min • Bar change: approx. 3 s • Magazine change: approx. 15 s • Material support area: 550 × 1210 mm • Material capacity: 10 × Ø 55 mm • Operating side: right • Power supply: 240 V DC/DC • Air supply: 6 bar • Dimensions: 1700 × 1250 × 1090–1380 mm • Weight: approx. 500 kg • Safety device: CE • High-speed function • DocumentationSpindle extension (for bar feeder use) • E45 / MT45 / HT45 → DM45 • For 45 mm spindle • Short bars up to 1100 mm • With reducing sleeves (3 pieces) • Required for use with SL1200Chip conveyor • Hinged belt conveyor • Discharge height: 1200 mmHigh-pressure coolant unit • 14 bar / 50 Hz • Additional high-pressure pump • For tools with internal coolant • Interface & softwareRobot interface • PROFI-NET interface • 24 V signals • Safety release • Automatic/manual operation switchingAdditional components • PC keyboard USB (QWERTY) • Machine status LED: Green (Automatic), Red (Alarm), White (Material handling)Installation & mounting hardware • 4× vibration absorbers • 4× mounting brackets • 4× heavy-duty anchorsParts collection device • Pneumatically operated • Max. part length: 120 mm • Max. diameter: 45 mm (51 mm) • Max. weight: 2 kg • Collection box / conveyor belt Technical Specification Counter Spindle No Driven Tools Yes

Condition: good (used), functionality: fully functional, roll diameter: 60 mm, roll width: 855 mm, total width: 880 mm, total length: 446,000 mm, conveying length: 446,000 mm, axle spacing: 145 mm, frame height: 80 mm, Pallet conveyor/roller conveyor approx. 446 meters Manufacturer: BITO Condition: Used Color: Galvanized Stock: approx. 446 meters Overall width: approx. 880 mm Roller width: approx. 855 mm Fork width: approx. 855 mm Axle spacing: approx. 145 mm Roller diameter: approx. 60 mm Material: Steel (galvanized) Frame height: approx. 80 mm Nlodpjuh Tbmefx Ac Dsh System consists of 185 segments: 28 segments: approx. 2110 mm length 14 segments: approx. 2130 mm length 12 segments: approx. 2350 mm length 2 segments: approx. 2490 mm length 9 segments: approx. 2710 mm length 16 segments: approx. 2830 mm length 49 segments: approx. 2850 mm length 38 segments: approx. 3025 mm length Each segment has 1 to 2 braking rollers (roller diameter: approx. 80 mm) Price per meter, net Feet to be ordered separately Features: Condition: fully functional, with signs of use Ideal for fast material transport Professionally disassembled and packed Collection address: Industriestraße 5 (47918 Tönisvorst) The conveying system was in operation until it was dismantled. Due to the excellent workmanship of the conveying system, your material will be gently conveyed to its destination, even under high load. Customized solutions for your intralogistics We are your competent partner for roller conveyors, belt conveyors, inclined conveyors, or telescopic conveyors for loading and unloading your goods! We will gladly prepare an individual offer for you or advise you on design or assembly issues. Simply let us know your requirements and the local conditions. Benefit from our many years of experience and our excellent network of experts. We have already successfully implemented projects for companies in a wide range of industries, such as logistics, pharmaceuticals, trade, or the electronics industry. Together, we will develop ways to optimize your processes and material flow in a cost-effective and sustainable manner. We can also offer you fully automatic sorting technology or complementary components such as picking shelves or containers.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, ID BYP01 We sell a used Chinese - PP melt-blown fabric extrusion line for melt blown, make: Zhangjiagang Sevenstars Machinery Co., Ltd., MFG 2020. It was used for a short time. excellent condition. All EU import duties have been paid. Output max 400 kg per 24 hours. General description: 1. Product size: PP melt blown fabric with width at 600mm (after trimming 17m*3) 2. Main Material: PP compounding material 3. Extruder type: SJ65/33 single screw extruder 4. Output capacity: 350-400kg/24hour 5. Electric power supply: 3phase, 380V; 50Hz 6. Additional equipment: • Vacuum feeder • Raw material dryer • Mesh manual filter • T-mould for melt blown fabric • Static electrical discharge equipment • Belt type forming 850mm • Collecting device • Winder and slitting Nlodpeuiq Dhefx Ac Dsh Model L/D Output Speed of Screw Rotationl Power Center Height SJ-65 10-33 80-150kg/h 20-120r/min 18.5kw 1000mm This line contains the following machines: Automacic vacuum loader ZJ-400 and hopper dryer make RHONG model RDM-25, MFG 2020; Single screw extruder, model SJ65/33, MFG 2020; Heating oven for hot air, model HJGF101-4, MFG 2020; Extrusion T-mold, model: SUS630, made in Japan, MFG 2020; Forming device, MFG 2020; Winder & slitting system, MFG 2020; Oil free air compressor, MFG 2020; The PP melt blown nonwoven production line is a polymer melt extruded from a screw extruder. The polymer is extremely stretched by high-speed hot air or other means to form very fine short fibers, which are aggregated to A web is formed on a roller or a screen curtain, and is finally reinforced by self-adhesion or thermal bonding. Its unique properties are widely used in mask filter materials, thermal insulation filling materials, medical health materials, wiping materials, etc. The finished product can pass the N95 standard as the core material of the mask. Process of melt blown nonwoven production line Polymer preparation --- Melt extrusion --- Metering pump --- Melt blown die head assembly --- Solution thin-flow drawing --- Fibber cooling --- Auxiliary network --- Electrostatic electret --- Reinforced finished product. Melt-blown cloth is produced by melt-blown process. The equipment mainly includes: screw extruder, melt pump, screen changer, melt-blown device, winding device, air system (hot air blower and heater), etc. The function of the screw extruder is to melt the slice material; the role of the melt pump is to accurately measure, control the output and the fineness of the fiber, and continuously and evenly transfer the melt to the spinneret. The function of the screen changer is to filter out impurities in the melt so as not to block the spinneret holes. The function of the winding device is to pack the melt blown cloth into rolls. The function of the air system (hot air blower and heater) is to provide the temperature and pressure of the hot air used in the drawing of the spinning air stream. Price Euro 39.200 Euro + VAT, negotiable, FCA: Oradea / Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: new, Year of construction: 2025, cutting diameter 335 mm saw band length 4400 x 34 x 1.1 mm table height 750 mm feed 5.0 - 2300 mm pro Hub capacity 90 degrees: flat 500 x 335 mm capacity 45 degrees: round 330 mm capacity 45 degrees: flat 320 x 335 mm capacity 45 degrees: round links 305 mm capacity 45 degrees: flat links 305 x 335 mm capacity 30 degrees: round 180 mm capacity 30 degrees: flat 170 x 335 mm 15 - 150 m/min workpiece weight max. 250 kg/m 3.0 kW 2550 kg 4350 x 2300 x 1900 mm - The ergonomic panel control can be networked and offers various option packs * Teleservice for remote maintenance * Setting of sawing programs in the AV * Import of saw programs from CAD with DSTV interface and data export - Automatic material feed: - In a compact design for shorter sections or with flexible insertion tongs available in almost all lengths - Exact positioning of the material using servo positioning technology - Forward-looking electric saw feed with ball screw: highest Nlodpfeulnb Dex Ac Doh Cutting performance and quality, while being gentle on the saw blade - Consistent use of the most modern recirculating ball guides: smooth-running, highly resilient, low-maintenance and backlash-free - Unique and patented double miter system: material is always stretched at right angles - Insertion tongs can be extended as required in 1000 mm increments Furnishing: - Automatic cutting pressure and feed monitoring - Frequency-controlled AC drive 15-150 m/min, 3 kW - Hydraulic material full stroke clamping - Automatic movement of the vice - Automatic saw frame height adjustment - Minimum speed and saw band monitoring - Electric miter swiveling via servo motor - Visualized program input with CNC control - Integrated MEBA tong insertion system from 5-2300 mm per stroke with integrated roller conveyor *Optional equipment: - Laser light for cutting line indication/scribing saws - Driven chip brush - Micro dosing system - Job menu - MEBA NC Server comfort package - Scraper belt conveyor for optimal chip disposal, 2000 mm length - Installation elements (4 pieces) - Adjustable deflector plate 335 DGA

Year of construction: 2016, condition: used, Features: Condition: fully functional, with signs of wear Ideal for rapid material transport Professionally disassembled and packaged Manufacturer: Unknown Year of manufacture: 2016 Model/Type: Belt Condition: Used Overall length: 2,000 mm Overall width including motor: 950 mm Overall width excluding motor: 700 mm Belt width: 650 mm Belt type: Smooth Material: Steel/Aluminum/Stainless steel Frame height: 90 mm Includes feet Includes SEW motor Includes side guide Belt conveyor Thanks to the excellent workmanship of the belt conveyor, your material slides gently to its destination, even under high load. Tailored solutions for your internal logistics Nlodpfx Aei Euufjc Dsh For roller conveyors, belt conveyors, inclined conveyors, or telescopes for loading and unloading your goods, we are your competent partner! We will be happy to prepare a customized offer for you or advise you on design or assembly questions. Simply let us know your requirements and the local conditions. Benefit from our many years of experience and our excellent network of experts. We have already successfully implemented projects for companies in a wide range of industries, such as logistics, pharmaceuticals, trades, or the electronics industry. Together, we will develop solutions to optimize your processes and material flow in a cost-effective and sustainable manner. We can also offer you fully automated sorting technology or supplementary components such as picking racks or containers.

Condition: like new (used), Year of construction: 1998, operating hours: 13,929 h, functionality: fully functional, overall weight: 2,400 kg, fuel type: electric, volume flow: 1.254 m³/h, operating pressure: 8 bar, pressure (max.): 10 bar, type of cooling: air, screw compressor TAMROTOR 110kW 7,5 bar 20,9m3/min Manufacturer: Garden Denver TAMROTOR Type: M110/7.5 EANA Air delivery: 20.9m3/min Year of manufacture: 1998 operating pressure: 7.5 bar Engine power: 110 kW Revolution: 3453/min Network: 50 Hz 400 V Nsdpfx Ajty Nkwec Djlh Maximum operating temperature: 115°C Weight: approx. 2400 kg

Condition: good (used), Year of construction: 2008, functionality: fully functional, total length: 900 mm, total width: 660 mm, power: 0.75 kW (1.02 HP), color: light grey, belt width: 400 mm, frame height: 170 mm, Features: Condition: fully functional, with signs of use Ideal for fast material transportation Expertly dismantled and packed Belt conveyor/ conveyor belt/ belt conveyor Manufacturer: VanderLande Condition: Used Year of construction: 2008 Total length: approx. 900 mm Njdpfxsrdziwj Ac Dslh Overall width incl. motor: approx. 660 mm Overall width without motor: approx. 500 mm Belt width: approx. 400 mm Belt type: Longitudinal grooves and smooth Material: steel Frame height: approx. 170 mm Color: Light grey Including SEW motor (0.75 KW) In stock: 1 piece Price per piece The conveyor system has run until dismantling. Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under heavy loads. Customized solutions for your intralogistics We are your competent partner for roller conveyors, belt conveyors, inclined conveyors or telescopic conveyors for loading and unloading your goods! We will be happy to provide you with an individual quotation or advise you on the design or installation issues. Simply let us know your requirements and the local conditions. Take advantage of our many years of experience and our excellent network of specialists. For companies in a wide range of sectors, such as logistics, the pharmaceutical industry Logistics, pharmaceutical industry, trade or the electronics industry, we have already successfully realized projects. Together we will work out ways to optimize your process and material flow in a cost-effective and sustainable manner. We can even offer you fully automated sorting technology or supplementary components such as order picking racks or containers.

Condition: like new (used), Year of construction: 2025, travel distance X-axis: 1,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, table width: 800 mm, table length: 1,200 mm, Machine type: Sinker EDM Manufacturer: ONA Model: IRIS6 Year of manufacture: 2025 Condition: Like new – demonstration machine. Technical data Travel range of the X-axis: 1000 mm Travel range of the Y-axis: 600 mm Travel range of the Z-axis: 500 mm Table length: 1200 mm Table width: 800 mm Description Demonstration machine in the showroom – not used in a production cycle. Ona Iris 6 X: 1000 mm Y: 600 mm Z: 500 mm C-axis 360° Positioning resolution: 0.001 mm XYZ positioning resolution: 0.0001 mm Feed rate: 3000 mm/min Feed rate: 18000 mm/min Working tank dimensions: 1700*1000*600 mm Door type: automatic drop-down door Table dimensions: 1200*800 mm Maximum dielectric height: 565 Maximum workpiece height: 515 Distance between the head and the table without the C-axis is 800 mm, and with the C-axis – 760 mm Maximum electrode weight: 50 kg Maximum table load: 4000 kg Machine dimensions: 3300 x 3370 x 2930 mm Machine weight: 7400 kg 21-inch color TFT touchscreen display Generator: 100 A Maximum material removal rate with copper mm3/min: 550 Maximum material removal rate with graphite mm3/min: 660 Volumetric consumption of copper: < 0.10% Volumetric consumption of graphite: < 0.05% Filtration system: environmentally friendly ONA filter with long service life and no cartridges – self-cleaning Flushing: through the central tool holder / tank – both programmable in the range of 1–31 Nsdey D R Sfjpfx Ac Dolh Additional equipment installed on the machine: - precision pressure rulers - central automatic lubrication system - C-axis + automatic Erowa ITS 100 chuck - machine head prepared for fume extraction - 9-position automatic tool changer - CNC access to shared files in Windows networks - file sharing of machine files in Microsoft Windows networks - 1650 liters of ONA dielectric fluid - ISL function – online diagnostics - dielectric cooler matched in performance to the 100A generator - 3 mm measuring probe

Year of construction: 2020, condition: excellent (used), functionality: fully functional, machine/vehicle number: C116353, Equipment: CE marking, Reconditioned Production Ready！ Ref Code:1014 Emmegi Classic Magic Electronic double‑head cutting‑off machine Twin‑head saw for aluminium and PVC profiles, with NC‑controlled DC motor driving automatic mobile head movement. All angles pneumatically settable down to 22°30’ external. Key Features Blade: Ø 450 / 500 mm cemented carbide blades Cutting length: 5 m useful cut Angle range: 90° to 22°30’ external (pneumatic tilt) Positioning: Magnetic strip direct measuring system Control: Alphanumeric fluorescent display (2 × 40 chars) Memory: 99 profile corrective values (auto angle calculation) 20 cutting lists (50 rows each) via keyboard 10 cutting lists (100 rows each) via USB (PC) Connectivity: USB port, RJ45 network card; label printer ready Clamping: Horizontal/vertical pneumatic vices with low‑pressure device Safety: Pneumatic full protective hoods for cutting zones Lubrication: Water spray‑mist (oil emulsion or minimal quantity oil) Technical Specifications Motors: 2 × 2.2 kW (400 V); total 5.3 kW Blade speed: 2,800 rpm Operating pressure: 6–8 bar; air consumption 15 NL/cycle Dimensions (5 m version): 9,400 × 1,080 × 1,840 mm (L×D×H) Nledjy U Tczepfx Ac Dsh Weight: Approx. 1,500 kg Applications High‑precision cutting of aluminium / PVC profiles for windows, doors, curtain walls, and light alloy processing.

Condition: used, Year of construction: 2004, machine/vehicle number: LC617, Used KRONES glass bottling line - 18000 BPHTechnical Specifications & Performance DataThis complete glass bottling line for spirits is a high-performance, used bottling line engineered around premium OEM equipment. With a nominal speed of 18,000 bottles per hour, it delivers reliable throughput for mid-to-high volume beverage production and industrial packaging. The line handles standard spirits formats with precision and is fully integrated from depalletizing to labeling and end-of-line packaging.Production speed: 18,000 bottles per hourBottle formats: Compatible with 0.7L, 0.75L, 1.0L bottle formatsContainer types: Designed for Glass bottle handlingKey OEMs: Krones (core line), Zalkin (capping), plus Hartness, MSK, Garvens, Videojet, Langenpac, Marsh, Mapex, GassnerPrimary modules and models: Krones Sensometic filler, Krones Variojet rinser, Zalkin T9/360 cappers (x3), Krones Prontomodul labeller, Krones Linapac autopacker, Krones Variocart C-40 case erectors (x2), Krones Variocol H-120 case sealer, Garvens E40-DMS checkweighers (x2), Videojet 3330 laser coders (x2)Years of manufacture (predominant): 2004 core line, with labeling and coding upgrades in 2015 and 2016Line scope: Fully integrated from depalletizing, rinsing, filling, capping, labeling, inspection, coding, packing, case forming and sealing, to conveyingAdvanced Automation & Control SystemsThe line features comprehensive automation across all stations to ensure stable, synchronized operation at 18,000 bph. Continuous multi-head capping from Zalkin enables consistent closure application. In-line inspection and weighing provide real-time quality control and automated rejection. Laser coding and case printing integrate seamlessly for traceability and compliance within beverage production.Integrated controls for coordinated machine operation and changeoversIn-line inspection (fill level/visual) and checkweighing with automatic rejectLaser coders for high-speed, permanent coding on glass containersEnd-of-line automation including autopacking, case forming, and sealingProduction Line Integration CapabilitiesEngineered as a cohesive, second hand packaging system, the line offers end-to-end integration and stable handling of glass bottles. It is suitable for spirits bottling with format flexibility across common 0.7L, 0.75L, and 1.0L sizes. The conveyor network covers container, pack, and pallet levels, supporting streamlined material flow and efficient accumulation.Inline operation from depalletizer to labeller and end-of-lineFormat flexibility across 0.7L, 0.75L, and 1.0LFull conveyor network for containers, packs, and palletsCompatible with additional upstream/downstream equipment as requiredMachine Condition & Maintenance HistoryThis used bottling line has been maintained to a very high standard with regular OEM servicing. It is currently in production with excellent operational performance and strong reliability. Availability is planned for October–November 2026, allowing for structured decommissi... Nsdpoyzz Hhsfx Ac Dolh

Condition: used, Year of construction: 2012, operating hours: 10,000 h, machine/vehicle number: M319, Used SIG filling monoblock 6000 BPH - year 2012Technical Specifications & Performance DataThis automatic filling and capping monoblock is engineered for reliable, mid-range output in beverage production and industrial packaging environments for fresh milk. Manufactured by SIG in 2012, it combines filling and capping on a single compact frame to reduce footprint and streamline changeovers. Designed for second hand installations and upgrades of a used bottling line, it offers dependable performance with standardized utilities and CE conformity.Manufacturer: SIGModel: GTN-00Year: 2012Production speed: 6000 bphBottle formats: Compatible with 0.5L to 1.0L bottlesContainers: Designed for PET and Glass bottle handlingOperating hours: 10000+Electrical supply: 380 V, 3-phase, 50 HzFull load current: 120 ALargest motor load current: 5.4 AShort-circuit interrupting capacity: 5000 AConstruction: CE-marked packaging machineryAdvanced Automation & Control SystemsThe monoblock is configured for automated operation with centralized machine controls, ensuring stable production at 6000 bottles per hour. Electrical architecture is standardized for 380 V, 50 Hz, three-phase networks, supporting safe integration into existing bottling equipment. CE conformity underpins safety circuits and compliant machine wiring, while the integrated design simplifies synchronization between the filler and capper to minimize downtimes during format changes.Production Line Integration CapabilitiesThis unit is well-suited for integration within a used bottling line or as a standalone monoblock in beverage production. Its adjustable working range supports bottle formats from 0.5L to 1.0L, with compatibility for PET and glass bottles, making it adaptable for diverse industrial packaging requirements. Conveyors and upstream/downstream modules can be synchronized to line speed, supporting efficient infeed and discharge configurations.Machine Condition & Maintenance HistoryThe machine is second hand with 10000+ operating hours and configured for ready-for-operation deployment, subject to standard installation and commissioning procedures. Its CE-marked construction and preserved utility specifications indicate a well-documented industrial asset suitable for continued service within beverage production environments.Operational Performance & VersatilityCombining filling and capping on one frame, the monoblock eliminates inter-machine transfer points and reduces footprint. The 6000 bph throughput is ideal for medium-scale operations, contract packaging, and line expansions. Flexibility across PET and glass bottles within 0.5L to 1.0L allows rapid response to product mix changes in bottling equipment portfolios. The integrated capping system ensures precise torque application aligned to the selected closure format when appropriately tooled.Installation Requirements & Site PreparationThe machine requires a 380 V, 50 Hz, three-phase electrical supply... Nsdpfjymdqfox Ac Djlh