Used Otc Fd-V6L for sale (641)

Condition: ready for operation (used), Serfilco EO 1 1/4CL5-DM1.0-DPA-ST-SX with VEM K21R 80 K 2 DOD FDS-SR/5334 motor, height 370 mm + motor 235 mm, top plate 355 x 250 mm, outer diameter of drain outlet 59 mm, used, in good condition, 100% functional. Fpjdpfx Afei D N Nheusn

Condition: good (used), Rubber disc coupling, claw coupling, connecting coupling, torsionally flexible coupling -Manufacturer: ERL -Type: CF-D-160-10 -Shaft: Ø 22 mm (pre-drilled) -Flange: 315 mm -Bolt circle: 295 mm 8x holes Fjdpfxjdfawdo Afuspn -Outer diameter: 315 mm -Dimensions: 315/315/H70 mm -Weight: 9 kg

Condition: as good as new (ex-display), Diaphragm pump, FLUX air-operated diaphragm pump – 8 bar,Membrane pump, New condition (without warranty) Fedpfx Ajzrm Aaefuopn Manufacturer: FLUX - GERÄTE GMBH (Made in Germany) Type: FDM 25 S/TT Serial number / Part number: 15663 Max. flow rate: 150 – 175 l/min Max. operating pressure (PN max): 8 bar Housing material: Stainless steel (S) Diaphragm / Seal material: PTFE / Teflon (TT) Connection size: 1" (DN 25)

Condition: excellent (used), Numerical Control Type NC 500 (Software Tooling System) Through-feed motorized conveyoring belts (No.) 2 No. 2 Horizontal units/supports Drilling heads for each horizontal unit (N°) 2 Max. working width (mm) 3200 - Min. working width (mm) 205 (ca.) No. 8 Bottom vertical units/supports Drilling heads/blocks for each bottom vertical unit (N°) 2 Fedpoyvrrqsfx Afuepn No. 4 Top vertical units/supports Drilling heads/block for each top vertical unit (N°) 2 Vertical top pressure clamps (N°) 5 Motorized endless screws to evacuate wastes/chips (N°) 2 Digital quota (axes) display Total installed power (Kw) 72,2 The CNC controls the movement (X axe) of the mobile horizontal unit The CNC controls the movement (X axe) of the conveyor belts The CNC controls the movement (Y axe) of the stops The CNC controls the movement (Z axe) of all the vertical units

Condition: new, functionality: fully functional, Year of construction: 2026, operating hours: 1 h, load capacity: 3,500 kg, lifting height: 4,700 mm, free lift: 1,580 mm, fuel type: diesel, mast type: triplex, construction height: 2,440 mm, fork length: 1,220 mm, empty load weight: 6,015 kg, total length: 3,085 mm, drive type: Diesel, construction width: 1,600 mm, Rough-terrain forklift Load center: 500 ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Triplex Condition: New Technical condition: New Fpsdsyvl Ncspfx Afujn Front tire type: Superelastic Front tire size: 36x14-20 Rear tire type: Superelastic Rear tire size: 27x10-12 Description: In addition to this unit, we offer other forklifts and warehouse equipment. Our equipment is workshop-tested and FEM4.004 certified. Please contact us by email or by phone. You can also find us at hsr-gabelstapler. Of course, we also buy your used equipment, even if you do not purchase a vehicle from us. Lease purchase and financing at favorable terms are available upon request. We will be happy to provide you with competent and comprehensive advice on our vehicles. Side shifter, fork positioner, 3rd valve, 4th valve, rear work light, front work light, heater, full cabin, full free lift, safety light, exterior mirrors, rotating beacon, windshield wiper, single pedal, LED, seat.

Condition: used, functionality: fully functional, color: orange, Year of construction: 2003, Paving machine in good condition (fully functional), 2003 €50,000 Fpedjy Ufgfepfx Afusn

Year of construction: 2014, condition: used, Capacity / kg/h / type / material / Two-component (2K) adhesive dispensing and mixing system – FERE / Walther Pilot For sale: a used, fully automatic 2K adhesive dispensing and mixing system. Manufacturer: FERE Dosier- und Klebesysteme GmbH Year of manufacture: 2014 Material pressure: up to 6 bar Control voltage: 24 V DC Operating voltage: 3 × 400 V / N / PE Fpodpfx Aozhxnajfuen Dispensing system: Servo-electric drive Includes Walther Pilot pressure vessel and pneumatic cylinders The system was used for dispensing and mixing 2K adhesives on trim strips and is also suitable for similar applications. Used condition Sold as shown Viewing possible by appointment Assistance with loading available Please contact us if you have any questions or are interested.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, cooling capacity: 410 kW (557.44 HP), overall weight: 2,200 kg, Güntner V-shaped dry cooler with 2 x 3 fans, diameter 900 mm. Cooling capacity under Eurovent conditions: 410 kW. Fsdpfx Afszltaxjuspn In very good condition.

Condition: excellent (used), mileage: 30 km, power: 125 kW (169.95 HP), fuel type: diesel, gearing type: mechanical, axle configuration: 4x2, wheelbase: 4,220 mm, first registration: 12/2024, emission class: euro6, color: light blue, driver cabin: day cab, number of seats: 3, Year of construction: 2024, Equipment: ABS, air conditioning, central locking, cruise control, immobilizer system, power assisted steering, seat heater, sliding door, traction control, trailer coupling, = Additional Options and Accessories = - Apple CarPlay - Heated exterior mirrors - Co-driver seat - Folding exterior mirrors - Electric windows - Electrically adjustable exterior mirrors - Euro 6 - Driver airbag - Remote central locking - Cruise control - Height-adjustable driver's seat - Height-adjustable steering wheel - Wireless charging function for mobile phones - Air conditioning - Cornering lights - LED daytime running lights - Metallic paint - Front center armrest - Radio DAB MP3 Bluetooth 4.0 - Spare wheel - Sliding side door - Immobilizer - Blind spot monitoring - Two rear doors - Partition - Partition without window = Further Information = General Information Number of doors: 6 Cab: single Registration number: V-11-KNG Technical Information Number of cylinders: 4 Engine displacement: 1,997 cc Transmission: 6 gears, manual transmission Front axle: Max. axle load: 1950 kg; steered Maximum rear axle load: 2000 kg Dimensions Length/Height: L4H3 Dimensions (L x W x H): 632 x 208 x 250 cm Weights Unladen weight: 2,100 kg Payload: 1,400 kg GVWR: 3,500 kg Interior Interior: gray Consumption Average fuel consumption: 5.9 l/100km Fuel consumption in urban areas: 5.6 l/100km Fpsdpfxoxpfbvj Afuen Fuel consumption in rural areas: 6.1 l/100km Maintenance APK (Technical Inspection): valid until 12/2027 Condition Technical condition: very good Optical condition: very good Number of keys: 2 (2 remote controls)

Condition: excellent (used), Year of construction: 1987, Carousel lathe SCHIESS FRORIEP - DV DF DZ DKE Fjdpfxjzc H Uxs Afuepn 1 x set off 4 jaws 410 x 330 x 200 mm MACH-ID 6693 Make: SCHIESS FRORIEP Type: DV DF DZ DKE Year: 1987 set off 4 heavy duty jaws for SCHIESS FRORIEP DV DF DZ DKE Jaw width 90 mm Jaw height 75 mm Hole to hole jump length ways 125 mm Hole to hole jump in width 250 mm Length:1200mm Width:800mm Height:400mm Weight:500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2012, Trio FDS3000 skinner for up to 150 cod fillets a minute. 460mm wide conveyor. Fpodpszawqrofx Afusn

Condition: new, “Partially unpacked for photography – unused item from warehouse clearance.” Fpodozh Avzspfx Afuen Quantity: 2 available Bus module MVK-MPNIO FDI8/FDO4 PROFISafe MURR ELEKTRONIK

Condition: used, includes: Slot drilling attachment Table milling machine Heavy-duty roller table From a private seller Used, in good condition, little use Manufacturer: Rex Type: TFZ-D-4 Machine No.: 15,842 Dust extraction connection: D 120/140 mm Space requirement: approx. 1800 x 2000 x 1100 mm Weight: approx. 1200 kg Location: 97447 Gerolzhofen, free loading, unpacked Fsdpfx Aoycxg Tofuopn Handover in the current condition as inspected, without guarantee or warranty

Condition: ready for operation (used), Endress + Hauser FDL 30-FGB2A7R Liquiphant II level sensor, serial number as shown in the photo, used, with normal signs of wear, 100% functional, scope of delivery as shown in the photos. Fpjdji D Ur Ajpfx Afujn

Condition: used, Year of construction: 2022, operating hours: 2 h, load capacity: 3,500 kg, lifting height: 5,500 mm, free lift: 1,495 mm, mast type: triplex, construction height: 2,550 mm, power: 36 kW (48.95 HP), fork carriage width: 1,000 mm, fork length: 1,200 mm, empty load weight: 4,820 kg, total length: 2,795 mm, drive type: Diesel, construction width: 1,290 mm, Diesel forklift Load center: 500 Fork width: 125 mm Fork thickness: 45 mm ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Triplex Fpodpfxeiy S Ite Afusn Transmission: Torque converter / Automatic Technical condition: New Front tire type: Superelastic Front tire size: 250-15 Rear tire type: Superelastic Rear tire size: 6.50-10 Description: New unit with a manufacturer's warranty of 24 months, but a maximum of 2,000 operating hours. The warranty starts upon first use. Immediately available. Side shifter, fork positioner, Fork positioner optional, available from €2,480. 3rd valve, 4th valve, rear work light, front work light, load backrest, CE certificate.

Condition: excellent (used), ELECTRONIC (CNC control) machine, Numerical Control Type NC 500 - Software Tooling System N. 2 Through-feed motorized conveyoring belts - Feeding speed (m/min) 35 - 75 ca. Max. working width (mm) 3200. Min. working width (mm) 215 N. 2 Horizontal units/supports N° 2 Drilling heads for each horizontal unit (11 Spindles for each horizontal drilling head) N. 5 Bottom vertical units/supports Drilling heads/blocks for each bottom vertical unit (N°) 2 x HP 1,8 N. 2 Top vertical units/supports Drilling heads/block for each top vertical unit (N°) 2 x HP 1,8 N. 4 Vertical top pressure clamps - N. 2 Motorized endless screws to evacuate wastes/chips Quota (axes) digital display. Total installed power (Kw) 62,7 Fpsdpjyyw S Rsfx Afuon The CNC controls the movement (X axe) of the mobile horizontal unit The CNC controls the vertical movement (Hv) of the 2 horizontal units The CNC controls the movement (X axe) of all the vertical units The CNC controls the movement (Y1 and Y2 axes) of the boring heads The CNC controls the movement (Y axe) of the stops The CNC controls the movement (X axe) of the pressure clamps The CNC controls the movement (X axe) of the conveyor belts The CNC controls programming of the working cycles

Condition: good (used), Three-phase motor with 2 speeds, electric motor -Power: 1.3/1.8 kW -Speed: 700/1440 rpm -Shaft: Ø 28 mm Fodpfxjcwdm Hj Afujpn -Design: B5 -Protection class: IP 44 -pole-reversible -Price: per piece -Quantity: 1 available -Dimensions: 500/300/H250 mm -Weight: 54 kg

Condition: used, Three-phase motor, electric motor -Power: 3 kW -Speed: 1415 rpm -Shaft: Ø 28 mm -Construction: B5 -Protection class: IP 44 -Dimensions: 380/195/H275 mm -Weight: 27 kg Fpedpscfgx Tjfx Afuon

Condition: used, Tool holder, milling holder, milling tool -Adjustment: SK50 -Test pin: 80 x 160 mm Fpodpfxec U Tzmj Afujn -Number: 1x recordings available -suitable for: tool changer -Price: per piece -Weight: 9 kg/piece

Condition: used, Tool holder, milling holder, milling tool, adapter, Weldon -Milling holder: test mandrel -Type: MK4 / Ø 30 mm W8802 C15 -Dimensions: Ø 31 x 300 mm Fodjuhr R Hopfx Afujpn -Weight: 1.6 kg

Year of construction: 2010, condition: good (used), machine/vehicle number: 8298-5 + 1357075, Offer 20142 Fpsdpfxjpahn Ho Afujn Technical data: - Tapping capacity up to approx. M 16 - Tapping depth approx. 75 mm - Drill feed down + up infinitely variable - throat depth 90 mm - Spindle speed up to 290 rpm - Pneumatic connection with pressure reducer 6 bar - Pneumatic foot switch - drive 400 V / 0,75 kW - Space requirement approx. W 700 x H 2250 x D 800 mm - Weight approx. 150 kg

Condition: excellent (used), Numerical Control Type NC 400 (Software) Through-feed motorized conveyoring belts (No.) 2 No. 2 Horizontal units/supports Drilling heads for each horizontal unit (N°) 2 Splindles for each horizontal drilling head (N°) 11 Max. working width (mm) 3200 - Min. working width (mm) 205 (ca.) No. 6 Bottom vertical units/supports Drilling heads/blocks for each bottom vertical unit (N°) 2 Fpodpjgk T Ttsfx Afuen No. 4 Top vertical units/supports Drilling heads/block for each top vertical unit (N°) 2 Vertical top pressure clamps (N°) 5 Motorized endless screws to evacuate wastes/chips (N°) 2 Digital quota (axes) display Total installed power (Kw) 48 The CNC controls the movement (X axe) of the mobile horizontal unit The CNC controls the movement (Y axe) of the stops

Condition: used, Clamping claws, clamping claws, clamping means, clamping element, clamping iron, clamping means, clamps, mounting brackets, clamps, clamping element, bracket, slot clamp -Clamping height: 60 - 370 mm -Clamping depth: 65 mm -Price: per piece -Number: 2 Stück -Dimensions: 290/80/H450 mm Fpsdpfxjfw Dbue Afuen -Weight: 9.6 kg/piece

Year of construction: 2001, condition: good (used), Electric motor Manufacturer: Danfoss Year of manufacture: 2001 Type: WF-DA90LT-H FCM 315 Type 12 Fpodpfxshgbtvj Afuen Motor number: J369521 Power: 1.5 kW Speed: 1,500 rpm Speed control range: 150 to 3,000 rpm Shaft diameter: .... mm Diameter of attachment gear: 40 mm Shaft length: mm Attachment diameter: 140 mm Bolt circle diameter for clamping screws: 110 mm Controller Weight: 22 kg Dimensions: 340 x 240 x 180 mm Several motors available

Year of construction: 1978, condition: like new (used), 4 kW engine max. tool diameter 270 mm 30 mm spindle spindle up / down adjustment spindle locking interchangeable spindle Fpjdpfxshh S Duj Afuen table dimensions 91 cm x 102 cm cast iron table top height to the table plane 850 mm