Used Promekon Quasimix 1000S for sale (7,427)

Condition: good (used), Height gauge, parallel gauge, height measuring device -Altitude gauge: Altimeter -Max. working height: 1000 mm Gbedpfxox Exxce Aixsr -Dimensions: 280/160/H1100 mm -Weight: 7 kg

Condition: good (used), Manual trolley, trolley, crane trolley, trolley drive, crane trolley, trolley, girder trolley, monorail trolley Gbsdpfxsprb A Hs Aixor -Crane chassis: Beam width: up to 175 mm -Load capacity: 1000 kg -Dimensions: see technical drawing in the photos -Number: 8x chassis available Price: per piece -Dimensions: 245/200/H190 mm -Weight: 7.6 kg/pc.

Condition: used, DC motor, gear motor, electric motor, spur gear motor, manual transmission -Electric motor speeds: 160/1000/2500 rpm -Power: 5.1/32/32 kW -Volt: 100-400V -Protection class: IP 22 -Gearbox manufacturer Woerner type: MVD Gjdpjdkf Igefx Aixjbr -hydraulic: switchable -Construction: B3 -Diameter shaft: Ø mm -Dimensions: 1430/1200/H750 mm -Weight: 1740 kg

Condition: used, Resistance, wire potentiometer, resistor, DC resistance, radio interference suppression choke, fixed inductors, interference suppression choke -Manufacturer: Fastron, radio interference suppression choke fixed inductors 1000 pieces Gedetpdmkspfx Aixobr -Type: MESC-101M-01 -Inductance: 100 µH / 1 A -Price: complete -Transport dimensions: 300/300/H100 mm -Weight: 2.9 kg

Condition: used, Rubber protective mats, conveyor belt, belt conveyor, conveyor belt rubber, rubber conveyor belt, conveyor belt, conveyor belt -Conveyor belt: conveyor belt conveyor belt -Width: 1000mm -Length: 7400mm Gbodel Ab Ecjpfx Aixsr -Thickness: 2mm -Transport dimensions: Ø 220 x 1000 mm -Weight: 17.6 kg

Condition: good (used), Adjustable gearbox, variable speed gearbox, spindle gearbox, DISCO variable speed gearbox -Manufacturer: Lenze, DISCO adjustable gearbox Gbedpjl A Ayxjfx Aixsr -Type: 11 511 Speed range: 1000-167 rpm for motors up to 0.37 kW / 1380 rpm -Dimensions: 228/163/H185 mm -Weight: 13 kg

Condition: used, Transformer, transformer, converter, three-phase autotransformer, three-phase transformer, three-phase transformer, single-phase transformer -Manufacturer: May & Christe, transformer type T 40 E 5113.0920.208 -Power: 1000/4600 VA -Technical data: see photo nameplate -Dimensions: 160/150/H140 mm Godsqmt Ayspfx Aixjbr -Weight: 13.8 kg

Condition: good (used), Year of construction: 1972, Scissor lift table, scissor lift table, scissor lift platform, scissor lift platform, single scissor lift table -Manufacturer: Lödige, scissor lift table -Load capacity: 1000 kg Gsdemghawopfx Aixjbr -Platform: 3000 x 2000 mm -Dimension retracted: height 390 mm -Dimension extended: height 2000 mm -Hydraulic unit: Bauknecht 3 kW / 150 bar -Transport dimensions: 3000/2000/H390 mm -Own weight: 2100 kg

Year of construction: 2011, condition: used, Electric chain hoist, crane, indoor crane, assembly crane, hand trolley, push trolley, crane trolley, trolley drive, crane drive, crane undercarriage, trolley -Manufacturer: Abus, electric chain hoist with powered chassis -Chain hoist: Abus type GM4- load capacity 1000 kg -Main stroke: 5 m/min -Fine stroke: 1.3 m/min -Chain length: 3.3 m -Electric chassis: Abus EF14 -Carrier width: max. 340 mm Gbodpfxot E D Hco Aixer -Dimensions: see photo technical drawing -Electrical accessories: connection cable see photos -Transport dimensions: 900/700/H340 mm -Weight: 63 kg

Condition: good (used), Screws, washers, stainless steel screws, VA screws, wood screws, hanger screws, solar fasteners, end clamp -Solar fastener: end clamp, box of 1000 pieces Gjdpeq Sbfyjfx Aixsbr -Type: AK 18-6160/50 H-42 mm -Module frame height: up to 42 mm -Material: aluminum -Price/tax: complete -Transport dimensions: 400/200/H240 mm -Weight: 27.1 kg

Condition: used, Bridge crane, hall crane, assembly crane, workplace crane, ceiling crane system -without chain hoist (available for an extra charge) -Load capacity: 1000 kg -Span width: 3100 mm -Crane length: 4100 mm -Helmet rails -Interior height of the profile: 65 mm -Inside width of the profile: 70 mm Godpfxjd Tdz Nj Aixjbr -Transport dimensions: 4140/450/H250 mm -Own weight: 180 kg

Condition: used, Linear drive, linear gear, lifting gear, spindle drive, rodless pneumatic cylinder -Manufacturer: Hoerbiger ORIGA, rodless pneumatic cylinder -Type: EU/4200 -Stroke: 1000 mm -Drive: pneumatic Gbodpfx Asf R Iwqoixor -Price: per piece -Number: 2 piece -Dimensions: 1300/70/H100 mm -Weight. 7.7 kg/piece

Condition: used, adjustable gear motor, variable speed gear motor, electric motor -Motor power: 0.37 kW -Speed range: 190-1000 rpm -Motor: adjustable -Hollow shaft: Ø 14 mm -Construction: B5 -Number: 1 motors available Godpec R R Awsfx Aixobr -Price: per piece -Dimensions: 370/190/H215 mm -Weight: 15 kg

Condition: good (used), Wanson steam generator from meat factory which closed in 2016. 698 Kw. Further details are on the plates shown in the photographs. Gbodpfsi Uli Eox Aixer

Condition: new, Year of construction: 2025, NEW horizontal band saw WRC 1000 - heavy-duty machinery / strong construction, hydraulical equipment, German electronics, high performance, easy to install and easy to maintain: - log diam. max. 95 cm - max. log length 7m (chassis can be adapted to max.log length - as an option) - main el. motor: 22/30 kW - control panel - remoted - log turners - hydr. pin grips - moving left-right Gedpsfngl Esfx Aixebr - hydr. roller Option: - loading arms - etc.

Condition: new, Panel saw ALTENDORF F 35 Type 3 - 1000 5.5 kW (7.5 hp), 3 speeds, Motorized height and tilt adjustment, Large protective hood, Double roller carriage 3,200 mm, Scoring unit with LED lighting, CNC parallel fence, cutting width 1,000 mm, Angle-mitre stop 3,450 mm, without length compensation, Table extension/table widening:, With high-quality CDF surface ----- Technical data ----- Swivel range: 0 - 46°, Carriage length: 3,200 mm, Cutting length: 3,100 mm, Cutting width: 1,000 mm, Cutting height: 154 mm, max. saw blade Ø: 450 mm, Motor power: 7.5 kW, Screen size: 15 inches, Working table height: 910 mm, Gjdpfx Aijwnr Ehoxjbr Suction connection Ø: 80 + 120 mm

Condition: new, Panel Saw ALTENDORF F 35 Type 3 - 1000 -Exhibition Machine- 5.5 kW (7.5 HP), 3 speeds, Motorized height and tilt adjustment, Large protective hood, Double roller carriage 3,200 mm, Scoring unit with LED lighting, CNC rip fence, cutting width 1,000 mm, Angle-mitre fence 3,450 mm, without length compensation, Table extension/table widening, High-quality CDF surface ----- Technical Specifications ----- Tilting range: 0 - 46°, Carriage length: 3,200 mm, Cutting length: 3,100 mm, Cutting width: 1,000 mm, Cutting height: 154 mm, Max. saw blade Ø: 450 mm, Motor power: 5.5 kW, Screen size: 15 inch, Table height: 910 mm, Extraction port Ø: 80 + 120 mm Gbjdpew Imptsfx Aixor - New exhibition machine -

Condition: good (used), Year of construction: 1998, travel distance X-axis: 1,020 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 510 mm, total length: 1,150 mm, total width: 510 mm, 3-axis CNC machine (VMC) Matsuura - MC-1000 VG X - Travel: 1020mm Y - Travel: 550mm Z - Travel: 510mm Table Length: 1150mm Table Width: 510mm Feed rate X-Axis:15000mm/min. Feed rate Y-Axis:15000mm/min. Feed rate Z-Axis:15000mm/min. Spindle Taper: 40ISO/Bt/Mk Gbedpfjwvhvfox Aixer Power on spindle:30kW Speeds / ranges:15000Rpm ATC / revolver: 30 Chip conveyor: yes Length: 2800mm Width: 2500mm Height: 2800mm Weight: 6800kg

Condition: excellent (used), CTS Temperature testing chamber T-55/1000 Li, water-cooled Temperature range: -50°C to +100°C Rated voltage: 400V 3/N 50Hz Rated power: 9.5 kW Rated current: 18 A Compressor: TFH2511Z / TFH2511Z, refrigerant R404A/R23 The type designation of the CTS chamber series is as follows: e.g., Type T -55/1000/Li 1) T means: Temperature 2) -55 means: lower temperature -55°C 3) 1000 means: 1000-liter test chamber volume 4) Li means: special equipment for testing with lithium-ion batteries Control: 32-bit controller LCD control panel Digital display of setpoint and actual values Numerical input of setpoints Error messages in plain text Ethernet interface RS 232 interface Free switching channels for customer-specific control of the test item Test chamber lighting: energy-efficient, bright LED light strip mounted on the door Insert rack: Stainless steel, support surface 970 x 980 mm Load per rack max. 35 kg Total load with max. rack load 100 kg 1a Conduit NW50 1b Conduit 2x NW125 1c Conduit 2x Rp 314° for Minimax Technical performance data: Temperature tests: Temperature range -50°C to +100°C Temperature deviation ≤ ±0.3 K over time Temperature change rate according to IEC 60068-3-5 Heating 2.5 K/min Cooling 2.5 K/min Thermal compensation approx. 4000 W at +20°C approx. 2200 W at -40°C Gsdpfxozg Ty Uo Aixjbr The technical data refer to an ambient temperature of +25°C, rated voltage 400V, without test item, without thermal compensation and without additional equipment. Options can affect the performance data. Dimensions: Test volume 1000 liters Test chamber dimensions Height, approx. 1000 mm, Width, approx. 860 mm, Depth, approx. 1100 mm External dimensions Height, approx. 1950 mm, Width, approx. 1270 mm, Depth, approx. 1900 mm Operating data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Rated current 18 A Rated power 9.5 kW Protection class IP 54 Sound pressure level < 58 dB(A) (measured according to DIN EN ISO 3744 at a distance of 1 m from the front) Weight approx. 1000 kg Heat dissipation to the installation room 10.4 kW Refrigeration unit: water-cooled, low-noise, fully hermetic stepless power adjustment by electronic monitoring and control system, environmentally friendly refrigerant R404A/R23 For your safety as a buyer, the following information! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerants 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of supply: (See picture) (Changes and errors in the technical data and information are subject to change!) We will gladly answer any further questions you may have on the phone.

Condition: good (used), Ribbon blender, paddle mixer, mixer, blending machine, turbulent mixer Inner surface made entirely of stainless steel Easy Clean system Capacity: 500 liters Motor power: 16.5 kW Mixing ribbon speed: +/- 156 rpm Excluding motor base and belts Gbjdowyf Ugspfx Aixjr Inlet diameter: 200 mm Outlet dimensions: 160 mm x 160 mm

Condition: new, Image shows roller conveyor with 2000 mm length. Versatile roller conveyor with height-adjustable legs. Ideal for feeding long workpieces. Gbsdpsw I Sc Esfx Aixer Selected variant: ZR 1000 Length: 1000 mm Roller width: 360 mm Height adjustment: 620 - 1030 mm Features: - Height adjustable - With mounting plate

Condition: used, Year of construction: 2023, The machine is ready for demonstration at the warehouse in Blomberg. The machine is ready for painting and is already equipped with 1 Bings Marple 8/25 high-pressure pump (up to 175 bar) and 4 Sames-Kremlin AVX Airmix spray guns. Machine equipped with a changeover valve for quick paint changes lever switchable to up to 3 paint circuits and 1 flushing agent pump (options) The machine is in an Ex-rated version. - Manufacturer: Ka-Ma - Model: KR BM 1000 B - Year of manufacture: 2023 - Working width 1,200 mm (1,300 mm) - Single-gun drive - Dry extraction - Belt conveyor system - Feed speed continuously adjustable 2–8 m/min - With paint recovery - Gun control PLC, LS - Number of installed paint circuits: 3 - Number of spray guns installed: 4 - Spray guns: Sames/Kremlin AVX, Airmix - Airmix spray system - Height-adjustable spray guns: 150 mm - Pump manufacturer: Binks Maple 8/25 up to max. 175 bar - Includes supply air filter hood - Suitable for water-based and solvent-based paints - Exhaust air capacity: 12,000 m³/h - Length: 3,243 mm - Width: 3,482 mm Gbsdozf N Thspfx Aixjr - Height: 2,450 mm - Volts, Hz 400 / 50 - Color RAL 7035, light gray - Weight 3,100 kg _____ Optionally, we can also provide you with a quote for the installation and commissioning of the system, as well as employee training. Upon request, we also offer regular maintenance and servicing of the machine. For further information, please feel free to contact us!

Year of construction: 2026, condition: new, Suitable for emptying containers of tuber vegetables and fruit. Technical Information Gjdsw Ec E Hopfx Aixjbr • Output: 25 cycles per hour • Load capacity: max. 1,000 kg per container • Power consumption: 2.2 kW, 230 V, 10 A • Container dimensions: 1,200×1,200×1,000 mm • Powder painted Dimensions: Length: 2,060 mm Width: 1600 mm Height: 1505 mm Weight: 415 kg

Condition: good (used), Year of construction: 2004, turning length: 1,000 mm, Manufacturer: MAZAK Type: QTN 250 Control: MAZATROL 640T NEXUS Year of Manufacture: 2004 Specifications Metric US Standard Max. Turning Diameter 675 mm X-Axis 230 mm Z-Axis 1025 mm Spindle Bore 77 mm Gbodpfx Aiswaiinexer Speed 4000 rpm Spindle Power 26 kW Tool Changer 12-Hole Quill Mount 5 Mk Dimensions (Estimate) Length 3800 mm Width 1800 mm Height 2000 mm Weight 5200 kg Please note: The information on this page has been obtained to the best of our knowledge and belief, and where possible, from the manufacturer. The information is provided in good faith, but its accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contractual terms. We recommend that you check all important details.

Condition: ready for operation (used), Year of construction: 2002, travel distance X-axis: 1,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 530, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 30, number of axes: 5, This 5-axis Bridgeport VMC 1000/30 was manufactured in 2002. It features an impressive X-axis travel of 1000 mm, Y-axis travel of 600 mm, and Z-axis travel of 500 mm. The machine is equipped with a HEIDENHAIN TNC 530 control and a NIKKEN 5-axis rotary table. If you are looking to get high-quality machining capabilities, consider the Bridgeport VMC 1000/30 vertical machining centre we have for sale. Contact us for further details. • Axis travel: Y 600 mm (note: another line lists Y = 300 mm; to be confirmed) Additional equipment Gsdpfx Aezf Iqroixebr • Nikken 5-axis rotary table, model 200ZA (200 mm) • Nikken 4th/5th axis interface Technical Specification Taper Size BT 40