Used Ras 83.30 for sale (1,105)

Condition: ready for operation (used), 6355 Resistance Welding Machine , Resistance Welding , Meritus RAS 150 VSH Resistance Welding Machine , Resistance Welding , Meritus RAS 150 VSH, Used machine Manufacturer : Meritus Type : RAS 150 VSH Overall dimensions : 1000 x 1620 x 2100 mm Weight : 840 kg Giedou Nvh Ujpfx Ahvou Electrical data : 415 V ; 150 kVA ; 50 Hz - equipped with a photocell - tool water cooled

Year of construction: 2003, condition: excellent (used), KUAG PIPE-HAUL-OFF RA 110 3+3 E 6 CATERPILLAR Year of construction: 2003 Caterpillars: 6 Diameter: Min 20mm Max 170mm Take-off speed: 0.2 - 10 m/min Condition: Very good operational Gisdpfsp Analjx Ahvou Sachal Extrusionsmaschinen D-26345 Bockhorn-Grabstede Germany

Condition: ready for operation (used), Maximum forming capacity at full length: 9 gauge mild steel, corresponds to approx. 3.8mm, max. forming length: 3200mm, min. flange height: 6 x material thickness, clamping beam speed: maximum speed 91.44mm/s, downward speed 39.88mm/s, bending speed: 1879.6mm/s, bending angle range: 0°-180°. Dimensions X/Y/Z: approx. 5160mm/2220mm/1780mm, weight: approx. 5300kg. The machine has a front gauge, thus the bending geometry is stored and the sheet size is irrelevant. An on-site inspection is possible. Gedpfxetia Hhs Ahveiu

Condition: used, Year of construction: 1998, Year:1998 Condition: good Configuration: - jogger Polar RA-4 - size: B1 Gisdpoww Ex Hsfx Ahveu - left + right - pressing adjustable - air table Specification: - max. size: 70 cm x 100

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, overall weight: 1,200 kg, volume flow: 1,000 m³/h, final pressure: 4 bar, Technical data: Product number RA 1000 B Year of manufacture 2004 Motor power 22 kW Capacity 1000 m3/h Max. vacuum 4 mbar Noise level 74 dB Rotational speed 1500 rpm Weight 1200 kg Dimensions [H x L x W] 1611 x 981 x 1310 mm The pump achieves a vacuum of 4 mbar as confirmed by the sensor measurement in the video attached below. After service New oil New oil filter New exhaust separators Oil rotary vane vacuum pump, suction device – a device used in technology for the removal of gases (creation of vacuum) in a closed space. Pumps are classified according to their operating principle into: positive displacement, jet, ion-sorption, ion-magnetic, molecular, condensation, adsorption, and ion pumps. Gsdpeyc Ht Isfx Ahvjiu The most important parameters of vacuum pumps are: Ultimate pressure (the lowest pressure that can be achieved with this pump), Pumping speed and dependence of this speed on pressure, Capacity (usually measured in m3 of pumped gas per unit time).

Year of construction: 2001, condition: ready for operation (used), - USED - CNC EXTERNAL GRINDING MACHINE Giedpfxoyry Rxs Ahvou CENTRE HEIGHT: 180 mm DISTANCE BETWEEN CENTRES: 1600 mm MAX GRINDING LENGTH: 1100 mm MAX ADMITTED LOAD: 150 Kg GRINDING DIAMETER: 300 mm X-AXIS TRAVEL: 350 mm Z-AXIS TRAVEL: 1250 mm GRINDING WHEEL SIZE: 610 x 120 x 203,2 mm MOTOR POWER: 11 kW CONTROL UNIT: FANUC 18i0 TA WEIGHT: 8400 Kg OVERALL DIMENSIONS: 3380 x 2200 x 1800 mm ACCESSORIES: PAPER FILTER ; PORTABLE HANDWHEEL NOTE: GRINDING WHEEL AUTOMATIC DYNAMIC BALANCER; ARTICULATED SUPPORT FOR GRINDING WHEEL CHANGE; GRINDING WHEEL FORMING SYSTEM; CUTTING IN AIR DEVICE; MARPOSS UNIMAR DIAMETRAL AND AXIAL HEAD

Year of construction: 1970, condition: ready for operation (used), Three old metalworking an tooling machines are available. 1) Milling machine Klopp FWU 13/6, year of manufacture: 1970, table length: 1905mm, machine dimensions with extended table: 2805mm/2000mm/1660mm, weight: approx. 2200kg. Without vice, with defective display. 2) Precision flat grinding machine Georg Müller MPS2, year of manufacture: 1971. 3) Plate shear Reinhardt RAS 52.80, year of manufacture: 1971, working width: 1540mm, power: 5.5PS, max. sheet thickness: 2mm, table height: 750mm, machine dimensions X/Y: approx. 2150mm/2020mm, weight: approx. 860kg. The mechanical lifting unit of the machine is defective. Documentation available. On-site inspection is possible. Individual sale possible. Giodpfju Eumhsx Ahvsu

Condition: excellent (used), mileage: 294,000 km, power: 375 kW (509.86 HP), first registration: 02/2017, fuel type: diesel, axle configuration: 8x4, fuel: diesel, brakes: engine braking, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, Year of construction: 2017, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, fridge, navigation system, parking heater, power mirror, = Additional Options and Equipment = - Aluminum fuel tank - Power brake booster - Low noise - Speed limiter - Air suspension - Radio/CD player - Reversing camera - Sun visor flap - Auxiliary heater - Xenon lighting - Power take-off (PTO) - Central lubrication system = Further Information = Axle configuration Front axle 1: Steered Front axle 2: Steered Rear axle 1: Suspension: Air suspension Rear axle 2: Suspension: Air suspension Weights Curb weight: 24,000 kg Payload: 8,000 kg gross vehicle weight (GVW): 32,000 kg Functional Gijdpewcfipofx Ahvsu Crane: FASSI 990 RA.2.28 XHE- Dynamic + JIB, year of manufacture 2016, mounted behind the cab Body make: FASSI 990 RA.2.28 XHE- Dynamic + JIB CE marking: yes Condition Technical condition: very good Optical condition: very good Financial Information Price: On request

Year of construction: 2003, condition: excellent (used), KUAG PIPE-HAUL-OFF 400/4 CATERPILLAR Year of construction: 2003 Caterpillars: 4 with synchronous drive Giedpfxjwqym Es Ahvsu Diameter: Min 40mm Max 400mm Take-off speed: 0.2 - 10 m/min Condition: Very good operational Sachal Extrusionsmaschinen D-26345 Bockhorn-Grabstede Germany

Condition: like new (used), functionality: fully functional, Z1015201800 Giedpfx Aexy I D Ujhveu Z1010880270 etc.

Condition: used, Slicer Grasselli NSL 600 3 The vertical Grasselli NSL600 slicing machine is designed not only for meat, but also for fish, poultry, and plant-based products, producing high-quality slices with excellent consistency. This efficient slicer offers high productivity and can accommodate a wide range of slice thicknesses, from 2.5 mm to 25 mm. The machine is suitable for processing both fresh and crust-frozen products. Even delicate products can be sliced effortlessly without damage, ensuring an excellent product presentation and yield. The slicer features a hygienic and ergonomic design that allows for quick and easy cleaning. The machine is constructed entirely from stainless steel. Technical Specifications: - Production capacity: up to 2,000 kg/h (depending on the product) - Cutting width: 600 mm Gjdpfx Ahjzcxl Aevsiu - Included cutting set: 19 mm (9.5 mm) - Option: BI version (for bone-in products) - Voltage: 400 V (3 + N, 50 Hz) - Power: 4 kW - Weight: 730 kg - Compressed air requirement: 7 bar - Infeed cutting chamber dimensions (W × D × H): 600 × 300 × 150 mm - Machine dimensions (W × D × H): 1200 × 1970 × 1500 mm

Year of construction: 2009, condition: ready for operation (used), functionality: fully functional, I am selling: TRASMEC COC800DN Mobile Screw Loader/ Conveyor in a good working condition. Manufactured in 2009 by the well-known Italian conveying equipment manufacturer TRASMEC S.r.l. Suitable for handling wood chips, sawdust, biomass, shavings, pellets, compost, and other bulk materials. Ideal for sawmills, pellet plants, biomass facilities, recycling operations, and wood-processing companies. Specifications Manufacturer: TRASMEC S.r.l. (Italy) Model: COC800DN Year of Manufacture: 2009 Serial Number: AL0581C-C006603 Mobile wheeled design Heavy-duty steel construction Industrial screw conveyor system Electric drive CE-marked European equipment Condition Used industrial equipment Structurally sound Godszcu Hvjpfx Ahveiu Applications Wood chips Sawdust Biomass Wood shavings Pellet production Compost and organic materials Bulk material handling

Condition: used, Year of construction: 2022, power: 15.8 kW (21.48 HP), total length: 1,760 mm, total width: 1,040 mm, total height: 2,555 mm, overall weight: 3,000 kg, No. 3279 Servo press / servo eccentric press Huras NKV 180-650 Used, year of construction 2022 Servo press for automation tasks and punching processes Fields of application: try-out and pre-series production / production of punched parts / punched strip overmoulding / packaging / assembly Freely programmable speed profiles and motion sequences from 1 - 150 strokes/min Setup in inching mode with full press force Nominal press force 180 kN Stroke height 5 - 50 mm (freely programmable) Stroke frequency / number of strokes 1 - 150 strokes/min Ram adjustment +/- 1 mm BDC dimension / installation space at BDC 274 mm Passage left / right 210 mm Tool installation space / press table/ram surface 650 x 450 mm LW Table opening 490 x 140 mm LW Punching direction from left to right Drive technology dynamic servo direct drive Lenze Drive power 15.8 kW Operating pressure 5 bar Control Siemens S7-1500 Swivelling touchscreen panel Siemens Simatic HMI TPI1200 12” Giodezc Ix Sjpfx Ahveu Dynamic servo feed unit VS-125 Transport dimensions approx. 1760 x 1040 x 2555 mm LWH Weight approx. 3000 kg Sale on behalf of customer, ex location near 35392 Gießen, without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Photos and videos serve as examples and do not represent the actual scope of delivery Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex location

Condition: used, maximum load weight: 30,700 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 03/2015, Equipment: ABS, Hello! We are pleased to welcome you. We are offering you the vehicle with the following equipment: Please be sure to leave us your telephone number in your message! * EZ: 30.03.2015 * permissible gross vehicle weight 39,000 kg * empty 8,300 kg * payload 30,700 kg * Type C03S * Total length approx. 14.40 meters * Total width approx. 2.55 meters * Total height approx. 4 meters Gisdpet Hccrsfx Ahvou * Sliding wall * SAF axles * Tires: 385/55R22.5 Our services: - Fresh TÜV+ASU - Delivery throughout Germany - Test drive possible at any time - Attractive financing conditions - Vehicle trade-in Opening hours also on Sundays by appointment

Condition: used, maximum load weight: 27,000 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 06/2015, next inspection (TÜV): 05/2026, total width: 2,550 mm, Equipment: ABS, German semi-trailer 1 owner Walking floor Hydraulic protective tarpaulin over the trailer Hydraulic tailgate Lifting axle Gijdjym Hypepfx Ahvou

Condition: used, Year of construction: 1996, functionality: limited functionality, CNC-Planer-Type Milling M/C - Double Column (Milling and Turning Center) | Brand: DÖRRIES SCHARMANN | Type: 4FZT | Year of construction: 1996 A high-performance gantry milling machine designed for machining large workpieces. Its primary applications include the milling and turning of large, complex workpieces. The machine can be inspected under power by appointment. Condition: Consistent with the year of manufacture; some parts require refurbishment. - A high-quality machine, and therefore well worth modernization / a complete overhaul / highly recommended. TECHNICAL SPECIFICATIONS: Main Dimensions: - Machine width: 13.230 mm - Machine height over the floor: 8.450 mm - Machine length: 31.100 mm - Working length: 11.000 mm - Clearance width: 4.400 mm - Clearance height from the table surface to the spindle nose of the standard milling head: 3.000 mm Table: - Table width: 3.450 mm - Total table length: 13.400 mm - Length of individual table: 6.200 mm - Total clamping area: 3.450 x 11.000 mm - Clamping area of single table: 3.450 x 5.000 mm - Maximum total workpiece weight: 112 tons - Maximum workpiece weight per table: 80 tons Crossbeam: - Travel: 2.000 mm Milling and boring support: - Drive power for milling and boring (spindle): 80 kW - Max. speed of the drive shaft (spindle): 2.500 rpm EQUIPMENT / ACCESSORIES: - 2 tables - 8 machining heads - Control: SINUMERIK 880 - 2 x chip conveyors - Documentation - CE marking No guarantee for completeness and accuracy of technical data and equipment. - Subject to prior sale - Gjdpfsyuptzox Ahvjiu Detailed technical data sheet and information on equipment available on request.

Condition: used, maximum load weight: 28,000 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 03/2026, Year of construction: 2026, Equipment: ABS, Legras SBS 2220 Moving Floor Trailer 90 m³ * SAF axles * 90 m³ loading volume * Disc brakes * Lift axle on the first axle * Air suspension * Pneumatic control * Load pressure gauge * Rolling tarpaulin * Side safety tarpaulin * Folding fender for lighting system * LED lights * ADR-approved wiring * Maintenance hatch front left * ABS connector * 2 x 7-pin power sockets * ISO air couplings with red and yellow coupling heads * Toolbox * Access ladder and platform on front wall * Double-wing rear door * Maintenance hatch front left Interim sale and errors excepted! Sale only under our General Terms and Conditions. Important Notice: Despite careful verification of all details in our offer, errors may occur. Some may be caused by transmission errors within the systems of different platform providers. Therefore, we expressly point out that all information is provided without guarantee and does not constitute a legal claim. Gisdsyfzicepfx Ahveu Legal notice: This sales advertisement does not constitute an offer according to §145 of the German Civil Code (BGB), but rather serves as information for contract initiation. All information provided is without guarantee and does not constitute warranted characteristics.

Condition: excellent (used), stable angle table, used Clamping surface 800 x 360 mm 5 T-slots Distance = 65 mm Gedpfx Ajzc Ebwohvsiu

Condition: ready for operation (used), Drum Screen Terra Select. 50 mm screen perforation Gsdpfxsvnmcvo Ahvsiu

Condition: excellent (used), For sale is a high-quality granite tracer plate (measurement plate) made of natural granite, designed for precise measurement and inspection tasks. The plate is mounted on a stable steel stand with adjustable leveling. Technical data: • Manufacturer: HAHN & KOLB Stuttgart / Johann Fischer Aschaffenburg (JFA) • Type: granite measurement plate • Plate dimensions: 1000 x 800 mm • Plate thickness: approx. 120 mm • Accuracy class: 0 according to DIN 876 • Permissible accuracy: 0.0080 mm • Measured accuracy: 0.0065 mm • Last calibration: 29.03.2016 • Material: natural granite • Steel frame with level adjustment Advantages of granite: • High wear resistance • No corrosion • Very good dimensional stability • Resistance to temperature changes • Ideal surface for precise measurements Condition: • Used • Work surface in very good condition • Normal signs of use on the stand • Condition as shown in the pictures Application: • Measurement laboratories • Tool rooms • Quality control • Mechanical and production workshops • Precise measurements and part tracing Included: Gisdpfezdan Uox Ahvju • Granite plate 1000 x 800 mm • Original steel stand

Condition: used, maximum load weight: 27,920 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 01/2024, Fifth wheel height: 1,150 mm, Hydraulic system: 110 l/min, 225 bar, Connections at the bulkhead: 1'' male screw pressure, 1'' female screw return. Axles: BPW On Road Eco Air, first axle with lift function, EBS 2S/2M KNORR. JOST steel landing gear, closed side underrun protection painted RAL 9010 white. Two LED work lights behind the 3rd axle and in front of the landing gear, one LED work light inside at the front, steel rims with black wheel hubs. 6 kg fire extinguisher, 3-meter ladder, radio remote control for floor operation, shovel and broom holders, two toolboxes on the overhang. 15-meter air hose with hydraulic reel and gun, hoses 4,400 mm. Self-supporting chassis, aluminum bodywork 3/2 mm, front-side catwalk with two ladders, door in left front wall with ladder, 10 mm floor type, aluminum movable side wall with 3,800 gr. tarp and track cleaner. Rear doors each with two integrated 18 mm locking bars, reinforced door seals. Rear upper crossmember can be unlocked on the right side via pin, pneumatic door release. White roof roll tarp 650 gr. with 200 gr. side reinforcement over 600 mm. 12 pairs of lashing rings, wear plates on rear sidewalls 3 x 1.5 m, lashing straps integrated into sidewall with stainless steel ratchets, left side protection tarp in RAL7038. Gsdpfsyw Dx Eox Ahvoiu

Condition: used, maximum load weight: 27,920 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 01/2024, next inspection (TÜV): 04/2027, Fifth wheel height: 1,150 mm. Hydraulic system: 110 l/min, 225 bar, connections on front wall: 1'' male screw pressure line, 1'' female screw return line. BPW On Road Eco Air axles, 1st axle liftable, EBS 2S/2M KNORR, JOST steel landing legs, fully enclosed side underrun protection painted RAL 9005 black. Two LED work lights behind the third axle and in front of the support legs, one LED work light inside. Steel wheels with black wheel hubs, 6 kg fire extinguisher, 3-metre ladder, radio remote control for floor functions, bracket for shovel and broom, two toolboxes mounted on the overhang, 15-metre air hose with hydraulic reel and pistol, self-supporting chassis 4,400 mm, aluminium body 3/2 mm. Catwalk at front wall with two ladders, door in front wall left with ladder, 10 mm floor type, aluminium movable side wall with tarpaulin (3,800 g) and rail sweeper, rear doors each with two integrated 18 mm locking rods, reinforced door sealing, rear upper cross member unlockable on right side by pin, pneumatic door unlocking, roof roll tarpaulin, black (650 g), with side reinforcement (200 g over 600 mm), twelve pairs of lashing rings, wear plates on rear side walls (3 x 1.5 m), black integrated lashing straps in side wall with stainless steel ratchets, left side protection tarpaulin RAL7038. Gisdoyw Dxxjpfx Ahvou

Condition: used, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 10/2020, next inspection (TÜV): 10/2026, Hydraulic hoses 4400 mm, 2x T'Edbro couplings, screw fittings, pressure 1", return 1". 3 x 9 ton BPW OFF Road axles, 1st axle as lift axle, axles center-mounted with axle load indicator. 6-piece tires 385/65 R 22.5, steel rims 11.75 x 22.5 / ET 0, disc brakes ø 430 mm, mechanical landing gears, foldable SSV, toolbox with triple-lock system. Aluminum superstructure 3/2, standing platform with ladder access on the left, floor profile type 10, CLEENSWEEP separation tarp with hydraulic drive at the front wall, hydraulic Ecotop cover. 3 x 9 ton BPW OFF Road axles, disc brakes ø 430 mm, axles center-mounted with axle load indicator, steel rims 11.75 x 22.5 / ET 0. Gjdpfjynp S Rox Ahvjiu

Year of construction: 2007, condition: used, dimensions 1.900 x 2.131 x 3.023 ,, weight of the machine ca. ca. 2.200 kg In our assessment, the heating element welding machine is in good used condition. Technical Specifications: Compressed Air: - Max. operating pressure: 6 bar - Compressed air consumption: 0.2 Nm³/cycle at 5 bar Heating Mirror: - 2x12 WALTOW heating cartridges, Ø12.5 x 400 mm, 1000 Watts, 230 Volts - 2x PT100 thermocouples - Heat-up time to 350°C: approx. 50 min Vacuum Pump: - BECKER vacuum pump, Model VT 4.16, 550 Watts Accessories, as well as the tools and clamping devices shown in the images, are included in the scope of delivery only if explicitly noted in the additional information. Subject to changes and errors in technical data and specifications, as well as prior sale! Gjdpszbvnxjfx Ahvoiu

Year of construction: 2023, condition: used, control Siemens voltage 400V 50 Hz V current intensivity 63 A In our assessment, the robotic welding system is in like-new condition. Technical Specifications: - MIG welding of individual components onto cooling plates using a robot - Automatic torch cleaning and wire cutting - 2-station rotary table for loading during the welding process - Siemens control system Godpfx Ahozbvnfovoiu Accessories, as well as the tools and clamping devices shown in the images, are included in the scope of delivery only if explicitly noted in the additional information. Subject to changes and errors in technical data and specifications, as well as prior sale!