Used Rippert Dust Extraction Blower 15 Kw for sale (50,563)

Condition: good (used), Radial fan, radial ventilator, radial blower, chip extraction fan, fan, extraction, chip blower, high-performance fan, metal chip extraction fan -Radial fan: metal chip extraction fan with wear plates -Engine: VEM K11R 160 MX2 -Engine power: 15 kW / 2920 rpm -Volume flow: m³/min / m³/h -Connection input: Ø 160 mm -Connection output: 150 x 130 mm -Base plate: 580 x 520 mm Ijdpfx Aevt R Aksmgeih -Dimensions total: 990/810/H1055 mm -Weight: 365 kg.

Condition: used, Year of construction: 2001, functionality: fully functional, type of input current: three-phase, filter area: 16.5 m², suction capacity: 2,400 m³/h, Equipment: type plate available, Dust extraction unit, Donaldson Torit brand, vacuum filter, dust collector for extracting metal, mineral, and hard fiber dust, and for effectively collecting process dust. Donaldson Torit Vibra Shake is a self-cleaning dust extraction unit for intermittent applications where high collection efficiency is important, e.g., recovery of precious metals. Two-stage filter cartridge for high-performance filtration of both coarse and fine dust. The filter screen captures coarse and fibrous particles. The vacuum fan is located behind the filter on the clean air side, minimizing the risk of explosion. Brand: Donaldson Torit Model: VS 1500 (Vibra Shake) Fan power: 3 kW Capacity: 2400 m3/h Filtration area: 16.5 m2 Iodpfx Aey Sz Dnjmgeih Inlet diameter: 180 mm Stock number: 1140

Condition: used, No. 04489 Mobile extraction unit / Mobile dust extractor ESTA Dustomat 61 Used For extracting wood dust and chips Filter type H2 for wood dust, residual dust content level 2, 0.2 mg/m3 Type 1, for extracting combustible dusts in zone 22 400 V, 3 kW, with power cable and plug Nominal air volume flow 1850 m3/h Extraction pipe connection diameter 160 mm Filter surface area 9.6 m2 Filter cleaning by hand crank Filter dimensions approx. 720 x 510 mm Chip container 860 x 570 mm Mobile unit CE-compliant Including new replacement filter Operating instructions available Transport dimensions approx. 1700 x 800 x 2100 mm LWH Weight approx. 250 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices excl. VAT, payment before collection or dispatch Iiedpfxoxnprcs Amgoh Terms of delivery: ex warehouse

Condition: excellent (used), For sale: BOFA ES400i industrial fume extractor, manufactured by BOFA International for Markem-Imaje. This unit is designed for extracting and filtering contaminants generated during the operation of marking devices, including lasers. The metal housing is equipped with wheels, a control panel, and connection ports for the extraction system. The interior and visual condition of the unit are shown in the photos. Data from the nameplate: - Model: ES400i Ijdpfx Amjz Spdusgjih - Part number: Power supply: 230 V, 50/60 Hz, 6.20 A - Date of manufacture: Serial number: 03/09/ES400i-1111

Condition: used, No. 04491 Mobile extraction unit / Mobile dust extractor ESTA Dustomat HMS 10 WN Used For extracting wood dust and chips Filter type H2 for wood dust, residual dust content level 2, 0.2 mg/m3 Type 1, for extracting combustible dusts of dust explosion classes St 1 and St 2 400 V, 1.1 kW, with power cable and plug Ijdpfxexnqauj Amgeih Nominal air volume flow 720 m3/h Filter area 3.5 m2 Extraction pipe connection diameter 100 mm Filter cleaning by hand crank Chip container 670 x 460 mm Mobile unit CE-compliant Transport dimensions approx. 1300 x 550 x 1700 mm LWH Weight approx. 100 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: used, Centrifugal fan, centrifugal fan, centrifugal blower, chip extraction fan, fan, exhaust, chip blower, high performance fan, metal chip extraction fan -Radial fan: metal chip extraction fan with wear plates -Motor: EMK type T3C 160M2-2 built in 2021 -Motor power: 15 kW / 2940 rpm Isdpfxsrh Nido Amgsih -Volume flow: m³/min / m³/h -Connection input: Ø 150 mm -Connection output: Ø 150 mm -Base plate: 530 x 580 mm / 580 x 470 mm -Quantity: 2x blowers available -Price per piece -Total dimensions: 950/800/H1215 mm / 930/820/H1220 mm -Weight: 395 kg/pc.

Year of construction: 2018, condition: good (used), Radial fan, high-pressure radial fan, pressure blower, vacuum blower, ventilation blower, blower, radial blower, side channel blower, chip extraction blower, fan, extraction, chip blower, high-performance fan -Manufacturer: WIPA, radial fan pressure blower from friction disc friction washing system -Type: WTG75-15-500 -Motor: Unitec 15 kW / 2930 rpm -Volume flow rate: m³/min -Inlet connection: Ø 250 mm -Outlet connection: Ø 250 mm Iisdpfx Amozlqk Iogoh -Fan wheel: Ø 600 x 60 mm -Blower dimensions: 1000/820/H1100 mm -Dimensions of base: 805/1210/H1425 mm -Weight: 358 kg

Condition: used, No. 04490 Mobile extraction unit / Mobile dust extractor ESTA Dustomat 10 Used For extracting wood dust and chips Filter type H2 for wood dust, residual dust content level 2, 0.2 mg/m3 Type 1, for extracting combustible dusts of dust explosion classes St 1 and St 2 400 V, 1.1 kW, with power cable and plug Nominal air volume flow 720 m3/h Filter area 3.5 m2 Extraction pipe connection diameter 100 mm Filter cleaning by hand crank Chip container 670 x 460 mm Mobile unit CE-compliant Transport dimensions approx. 1300 x 600 x 1700 mm LWH Weight approx. 100 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Iijdoxn Tiljpfx Amgjh Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: used, Year of construction: 2021, 160mm inlet dia 2.2kw motor Max flow rate 2,000m3/hr Iijdpfx Ajz Hztasmgsh Filter area 9.1m2 Dimensions 1688 x 830 x 2050mm Weight 330kg Serial nr - 243339219303 Year - 2021 CE

Condition: new, functionality: fully functional, Year of construction: 2023, extraction blower, wall-mounted fan high-performance fan, axial fan Industrial axial fan 800mm diameter ZIEHL-ABEGG fn80-sdi.6n.v7 NEW! Sold in a box of several pieces manufacturer: ZIEHLL-ABEGG type: FN080-SDI.6N.V7 Axial fan with sickle-shaped aluminum blades air flow: 10000-24000m3/h nominal air flow: 15800m3/h at 140pa air pressure motor power: 1.15kw/0.53kw Nominal values 3. phase~400V D/Y 50Hz 1.55/0.95kW 3.3/1.7A rpm:850/650/min Protection type:IP54 sound level:70 dB COSY 0.69 max temperature range:80°C Motor protection: thermal contact Isdpfx Amjw U T E Isgsih Protective grid type: mesh grid Dimensions (w x h x d) mm: 861 x 861 x 273

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 18133-00 12632868, input voltage: 400 V, Nederman ventilation unit for extraction of paint dust, oil mist, and contaminated air Iodpfx Amow Hw Dgegjih

Year of construction: 2019, condition: good (used), Dust extraction,welding fume extractor,cartridge filter self-cleaning,pneumatic,vacuum for plasma,laser,sandblasting,sodding,blasting and all kinds of dry dust. Brand: TEKA / Bystronic Model: Filtercube 4H / FilterBys Version 2 Year of manufacture: 2019 Filter cleaned by microprocessor controller with compressed air pulses during operation thus high efficiency of the device. Low compressed air demand thanks to the system "Power-Spray" The Filtercube central filter unit equipped with cartridge filters is the ideal solution for almost all problems in the area of smoke and dust filtration. Fan on the clean side which reduces the risk of explosion to a minimum. Application: central extraction system for multiple welding stations extraction system for welding robots Iijdenyhvqspfx Amgjh extraction system for thermal cutting and grinding tables system for general hall filtering (push-pull system, displacement system) extraction system in combination with an extraction table extraction system for grinding of non-exploitable materials Parameters: 5.5 Kw fan Capacity 3800 m3/h Vacuum pressure 3250 Pa Inlet diameter : 250 mm Filtration area of 100 m2 Equipped with "DUST-VAC" unit , which automatically pumps the dust into a separate tank. Possibility to order new filter cartridges tailored to the customer's needs Technical documentation included.

Condition: excellent (used), High-pressure radial fan, dust extraction fan, exhaust gas extraction, welding fume extraction, extraction, fan, pressure blower, vacuum blower Iedpfxsb Uhp Re Amgjih -Engine power: 11 kW -Density: 1.2 kg/m³ -Volume output: 84 m³/min -Pressure increase: 3800 Pa -Connection input: Ø 275 mm -Connection output: Ø 270 x 130 mm -Dimensions: 1000/800/H700 mm -Weight: 252 kg

Condition: new, Power 15 KW Technical specification:Hopper opening: 600 x 800 mmHopper capacity: 0.6 m³Working width of the rotor: 600 mmDiameter of the rotor: 260 mmDrive power: 15 kWRotor speed: 90 rpm.Number of knives: 14 pieces 2 piecesType and size of knives: concave / 40 x 40 mm, reversible cutting crownsconcave / 30 x 30 mm, broaching knivesScreen perforation: 15/20 mmPaint finish: frame in RAL 5010, hopper in RAL 7016(HoKuTech standard paint finish)Connected load: 400 V /- 5 % / 50 Hzincluded:Switch cabinet (Rittal) with 5 m cableElectrical control (PLC Siemens)Star-delta startRubber oscillating elementsE-rotor with knife pockets milled into the profileGear limit switch1. Knife rowHold-down device on pusher for long and large partsLarge 40 x 40 mm knives for optimum material feedVery robust gearboxSpecial broaching knives to prevent lateral jammingMachine number: 510-5238 Iodpfxjvwfhcj Amgeih

Condition: excellent (used), Year of construction: 2021, Extraction connection, D 140mm Iodpfx Amszxql Eogsih Chip collector capacity 200L Airflow rate [m³/h] 2500 3 kW, 400V

Condition: used, power: 2.2 kW (2.99 HP), input voltage: 400 V, input current: 16 A, input frequency: 50 Hz, type of input current: three-phase, volume flow: 1,850 m³/h, intake manifold diameter: 160 mm, filter area: 8.25 m², total height: 1,950 mm, total length: 1,700 mm, total width: 800 mm, overall weight: 200 kg, Equipment: CE marking, No. 3273 Extraction unit / dust extractor AL-KO Mobil-Jet 160 Used Dust extractor for extracting wood dust and chips Iiedpfsz Ibgiex Amgjh Motor power 2.2 kW Nominal air flow rate 1850 m3/h Minimum air flow rate 1448 m3/h Extraction inlet Ø 160 mm Negative pressure 2120 Pa Filter area 8.25 m2 Air filter category G Pneumatic filter cleaning AL-KO OPTI JET Compressed air connection 8.5 bar Chip collection container approx. 320 l Base frame without wheels Suitable for wood dust separation, residual dust content class 2 (H2), max. residual dust content 0.2 mg/m3 Type 1 (B1), suitable for extracting combustible dust in Zone 11 BG-tested, GS-tested CE marking Suitable for indoor use Electrical connection 400 V / 50 Hz, three-phase Ready to plug in, including power cable and 16 A plug Transport dimensions approx. 1700 x 800 x 1950 mm LWH Weight approx. 200 kg Sale on behalf of customer, ex location near 73430 Aalen, without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Photos and videos serve as examples and do not represent the actual scope of delivery Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex location

Condition: new, functionality: fully functional, Year of construction: 2026, Advantages of DC Chip Extractors The purpose of the Vibra Motor shaking system is to ensure stable operating parameters and to monitor the proper functioning of the extractor. A heavy-duty design enhanced with a radial fan guarantees maximum vacuum efficiency. The extractor is intended for dry sawdust and wood chips. Thanks to the airtight construction, it is suitable for operation both outdoors and inside the facility. Adapted for operation in a positive-pressure system (fans work on the contaminated side of the dust collector) as well as in a negative-pressure system (fans work on the clean side of the dust collector). The sound-insulated design and specially shaped impeller blades contribute to quiet and efficient operation while minimizing electrical power consumption. A key advantage of the extractor is the use of flexible and durable seals in critical areas, improving the tightness of the entire system without heat loss at connection points. A multifunctional device with a modular system allowing any configuration of the extractor. Warm air recovery system. Control cabinet equipped with an intuitive control panel that allows monitoring of filter contamination levels. For filtering smaller particles, a filter such as HEPA should be used. It is forbidden to use this extractor in an explosive atmosphere. The extractor is not designed to work with wet material (e.g., wet sawdust). Industrial Chip and Sawdust Extractor DCV21750 Technical Specifications Motor Power: 25 HP / 400 V, 50 Hz Extraction Capacity: 21,750 m³/h Inlet/Outlet Diameter: 400 / 400 mm Suction Speed: 28 m/s Number of Filters: 2 × 48 Number of Waste Bags: 8 Dimensions (L × W × H): 4600 × 1700 × 3500 mm Iedpfx Ajx Agpzemgjih Weight: 1400 kg SPECIAL OFFER!!! LAST UNIT IN STOCK!

Condition: used, machine/vehicle number: 0940, without hall piping Iiedpfx Aorz Iq Homgsh

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 1,060 kg, total height: 1,790 mm, total length: 1,370 mm, total width: 980 mm, We are a company with over 30 years of experience in trading machinery for the plastics processing industry. All machines offered are available from our stock, and we can perform tests using your material upon request. The XC series granulators are designed for granulating both soft and hard plastics. The stainless steel housing and bearing lubrication system ensure quiet and stable operation. Each model is equipped with an ammeter. Versions with cyclones are also available. The control cabinet is based on Siemens components. Before purchase, it is possible to carry out material trials on the customer's material. For any questions, please contact us by email or phone. Iodpoxud Nvefx Amgeih P&F Wartacz was established in 1990 and is currently the oldest trading company in the plastics machinery sector in Poland, continuously supplying injection moulding machines, granulators, crushers, chillers, belt conveyors, peripheral equipment, and spare parts. Rotor width (mm): 480 Motor power (kW): 20 Rotor knives (pcs): 24 Fixed knives (pcs): 2 Weight (kg): 1060 Option to purchase with extraction unit and cyclone instead of drawer. Unused machine available immediately from stock, tests before purchase are possible. (Dozens of machines available on stock)

Condition: used, Centrifugal fan, dust extractor fan, fan, extractor, dust fan Iisdpfxjc Ir Due Amgsh -Motor power: 4 kW -Speed: 2850 rpm -Max. Volume flow: 7200 m³/h -Max. Pressure: 120 kp/ m² -Connection input: Ø 450 mm -Connection output: 400 x 400 mm -Impeller Ø: - mm -Dimensions: 1030/930/H1240 mm -Weight: 222 kg

Condition: good (used), Dust extraction fan, exhaust gas extraction, welding fume extraction, extraction, fan, extraction blower, radial fan, ventilation fan, radial blower, blower, fan, fume extractor -Manufacturer: Exhausto Exodraft, smoke extractor Isdpfjzcvw Njx Amgeih -Type: RS -Motor: 0.03 kW 1350 rpm -Inlet connection: Ø 280 mm -Dimensions: 360/360/H290 mm -Weight: 11.7 kg

Condition: new, Year of construction: 2021, functionality: fully functional, machine/vehicle number: 33461/2021/155537, overall weight: 1,150 kg, filter area: 55.2 m², suction capacity: 2,550 m³/h, Dust extraction, fume extraction by Herding. Model: COMP 1500-14/9 SB Clean surface filtration based on rigid filters. High-efficiency blast cleaning system with low compressed gas consumption. Powerful radial fan with direct drive electric motor with attached frequency converter for process- and energy-optimized operation. Integrated control cabinet with processor to control all components. High-quality powder coating of the compact housing. All Herding polymer-based filter media are completely PFAS-free, have an extremely long service life and, depending on the process, achieve a service life of more than 15 years. Unit new. Iodpfxeuy N S Us Amgeih 11 Kw. fan with integrated frequency converter Capacity - 2550 m3/h Inlet diameter - 200 mm stock no.: 0889

Condition: good (used), Storage location: 3129 Manufacturer: Pulsnitz Year of manufacture: 1979 Machine number: 1308 Type / Model: Sto 5 / 125-1 Capacity: 400 m³/h Maximum negative pressure: 1,250 Pa Density: 1.2 kg/m³ Iisdpozmaw Hefx Amgeh Maximum operating temperature: 50 °C Impeller diameter: 480 mm Suction port diameter: 380 mm Connection: 0.37 kW 220/380 V Condition: good Weight: 35 kg Dimensions: 480 x 600 x 1,100 mm

Condition: used, Year of construction: 2018, operating hours: 22,700 h, functionality: limited functionality, power: 15 kW (20.39 HP), We are selling a 15 kW ABB electric motor, model M3BP 160MLB 2. The motor was running flawlessly until removal and has approximately 22,700 operating hours. Sold without warranty or return. Inspection or shipping from factory possible. Weight approx. 80 kg without packaging! Shaft diameter approx. 42 mm, length approx. 104 mm, and keyway approx. 12.5 mm wide. Iedpfx Aov U Ntksmgjih

Condition: good (used), Year of construction: 2020, Radial fan, dust extraction fan, fan, extraction, dust blower, blower, exhaust fan, low-pressure radial fan, blower, pressure blower, side channel blower, side channel blower, ring blower, vacuum pump, blower, radial fan -Manufacturer: cimme, dust extraction fan radial fan type CBJ G06330 E4 RD -Engine: 9.2 kW 2925 rpm -Volume flow: 35/63 m³/min -Connection: Inlet Ø 250 mm -Connection: Outlet Ø 250 mm -Fan wheel: Ø 660 x 70 mm -Protection class: IP55 -Dimensions: 1090/780/H1330 mm -Weight: 245 kg Iiedpfxexpfylo Amgeh