Used Romer Heating Furnace For Powder Paint for sale (21,319)

Year of construction: 2019, condition: new, machine/vehicle number: BI3, Annealing furnace for stress-free annealing and forming of acrylic glass The furnace has two doors on one side and two narrow doors with a rail system on the rear side. The sheets are hung in there and pneumatically clamped and released using a foot pedal. - The furnace has a maximum temperature of 230°C and a permanent deviation of approximately +/-3°C from the set temperature at 75°C. - The internal dimensions are approximately 1600 mm wide x 2000 mm deep. In terms of height, the furnace can accommodate a 1800 mm high sheet hanging freely within the rail system. - The rail system can be seen in the attached images. Dodpfsb Nzycsx Adrjcn The rail system can also be mounted on the front side. It can accommodate sheet thicknesses from 1.5 to 25 mm and support a sheet weight of up to 150 kg. - The power can be adjusted in several stages. - Air circulation of approximately 3,000 m³/h - For safety reasons, the doors can also be opened from the inside. - Safety device that also shuts off the heating in the event of a fan failure.

Condition: good (used), functionality: fully functional, Complete Industrial Powder Coating Line for Sale We offer a complete industrial powder coating line in good working condition. The installation has been professionally maintained and is suitable for coating a wide range of steel and metal products. Equipment includes: Pretreatment system Drying oven Powder coating booth Powder spray equipment Curing oven Conveyor system Electrical control system The complete line is available for immediate sale and can be inspected by appointment. Condition: Well maintained Fully operational before dismantling Dsdpfszqur Hjx Adrocn Suitable for industrial production GEMA OptiStar CG07 Powder Coating Gun

Condition: new, Year of construction: 2026, Firing chamber output: 49kW Working power: 45kW New appliance in original packaging: Yes Hot air blower, flue gas blower, electronic control with digital display: included Supply air filter, recirculation air intake filter: large-surface supply air filter without power loss / included Hot air conveying pipes: 2 x 200mm with plug-in freely rotatable 90° bends Smoke outlet diameter: 180mm Firebox length: 660mm Firebox width: 480mm Firebox height: 600mm Air flow : 3500m³/h Supply air filter: Yes, large-surface supply air filter without power losses Power consumption: 550W designed for room volume: 1000m³ Djdpfxepn Nyzo Adrecn Weight: 310 kg

Year of construction: 1980, condition: used, TAŚMÓWKI FOR FOAM BULLMER WERK 7759 Location Gorzow Wielkopolski. Conditions of delivery Pick your own Cost of delivery Client cover Djdpocr Ru Defx Adrocn startup type negotiated Description Comments MACHINE FOR CUTTING UPHOLSTERY FOAM ENGINE 1 kW, 220/380 VOLT, HAS A NOSE-STONES TO SAW TAPE LENGTH WITHOUT END 4050 mm, cutting width 1100 mm, table length 2250 mm, table width 1170 mm

Year of construction: 2020, condition: new, 7" Touchpad Dodpfx Aefzkrnjdrjcn Large color touch panel looks aesthetically and uses comfortably and intuitively. Set on it all the important parameters.Memory 20 programs each with 10 events You can save up to 20 programs and activate up to 10 consecutive events time-temperature arranged in the heating curve. This is especially needed for the more demanding process.Information about consumption of power Consumption is calculated based on the settings of the burner. This feature will allow you to estimate the cost of the cycle, consumption and plan check staff.Recorder of cycle USB Each of the ovens is equipped with two-channel temperature recording on USB flash drive.. Each file is automatically created and is responsible for a separate cycle are recorded temperature extremes, hour and minute measurement. Files are saved in * .csv (Excel sheet) For all buyers the end of 2016 option is free, the competition for the option you have to pay up to several thousand euros. History 20 latest of burn Something's wrong? and perhaps too few overbroad elements from the oven? Now you check thoroughly oldest and lastest burning parameters, how often took, whether cycle proceeds without any problems, what was the consumption and when they ran. Start the oven automatically at 6 am How many times have you stay after hours and expecting end of the cycle? If you own a powder coating plan that works for a long time, You know exactly what we are talking about. With our solution you can leave cycle not cured in the oven, to automatically end when you come to the job next morning.

Condition: excellent (used), Year of construction: 2022, operating hours: 1,000 h, functionality: fully functional, machine/vehicle number: SN210551, overall weight: 14,000 kg, type of input current: AC, input voltage: 400 V, power: 400 kW (543.85 HP), Equipment: type plate available, A MIXACO heating/cooling mixer is a combined system consisting of a heating mixer and a downstream cooling mixer, specifically designed for the processing of powders, granules, and compounds (e.g., PVC dry blends, WPC, or masterbatches). Technical specifications – summary (details can be found in the documents): Hot mixer: • Volume: 3500 liters – Usable volume: 2500 liters • Tip speed: 5-50 m/s • Made of duplex steel – 1.4462 stainless steel • Power drive with 400 kW FC controlled • Vacuum up to 150 mbar abs. Cold mixer: • Volume: 9000 liters – Usable volume: 7650 liters • Tip speed: 3.5 – 7 m/s • Made of 1.4541 stainless steel • Power drive with 90 kW FC controlled The operating principle is divided into two physically and apparatus-wise separate process phases: 1. The heating mixer phase (heating and homogenizing) • Mechanical friction: In the heating mixer, a modular mixing tool rotates at a high circumferential speed (approx. 10–40 m/s). The intense flow and vortex formation (mixing vortex) causes the particles of the mixture to rub intensely against each other. • Heating: This mechanical friction generates the necessary thermal energy directly in the product, quickly and evenly heating the material to the desired target temperature (sometimes exceeding 100 °C). • Recipe component addition: At the same time, all recipe components, such as additives, dyes, or liquids, are perfectly homogeneously distributed. An integrated aspiration system also ensures the dehumidification of the mixture. 2. The transfer • Once the target temperature defined in the process program is reached, a contoured, dead-space-free outlet opens on the heating mixer. • The hot, homogeneous mixture is transferred with minimal residue and quickly to the cooling mixer, which is located directly below or next to it. The heating mixer is then immediately available for the next batch. 3. The cooling mixer phase (gentle cooling) • Heat exchange: In the cooling mixer (available in vertical or horizontal design), the hot material is passed over cooled surfaces. Dedpfsz Iww Rox Adrscn • Water cooling: A targeted cooling water circuit in the double jacket (bottom and side walls) efficiently removes thermal energy from the dry blend. • Agglomeration prevention: A slow, material-friendly stirring mechanism keeps the mixture in motion until the final storage temperature is reached. This prevents caking (compaction) due to residual heat before the material is transferred to silos or further processing. Summary created with AI. The units can be inspected in operation in the Netherlands. The system for sale was used in the R&D center of UBQ for development purposes. This explains the very good condition for the low number of production hours. We also have a steel structure available for the setup. This is not included in the price. If there is interest, it can be negotiated separately. Currently, the system is located outside of Europe – we need to determine whether direct transport is feasible or whether import to Europe by UBQ is more sensible (which would allow for a sale within Europe with a reverse-charge mechanism).

Year of construction: 1998, condition: used, Grinder for sharpening FOR TOOLS GRIFO F36 M FOR TOOLS FOR WOOD FACTORY WHIT PUMP HYDRAULIC AND SANDER dividing chain, SAWS, MILLING CUTTERS Dcedpfx Aob Umtksdren

Condition: used, functionality: fully functional, Foundry factory for sale, Property includes 15 buildings, 6 hectares of land. Located at the Karhula industrial site next to the city of Kotka in southeastern Finland, Karhulan Valimo was founded in the 1880’s. In 1902, the foundry was merged with a wood grindery, glass factory, brick factory and engineering works to form the Karhula Oy. In 1915 the Karhula Factories were sold to Ahlström Corporation. The current Foundry was built in 1960 and in 2000 Ahlström sold the foundry to Sulzer Pumps Finland. In 2016 Sulzer Pumps decided to close the foundry and it was sold to Karhulan Foundry Oy, which was unfortunately declared bankrupt in March 2021. Throughout its history, the Djdpeuxmt Tsfx Adrscn foundry has been known of been able to produce highly demanding castings particularly in high alloyed steels. In 2022 Karhu Assets Oy bought the facilities and machinery of the foundry. Most of the equipment in the fettling shop has already been sold, while most of the machinery in the moulding department and meltshop are intact and available. All heat treatment furnaces, a total of 10 units, are in place and available for sale. Welcome to visit on the site! The equipment is located in Kotka, 48600, Finland, and is sold EXW Kotka in its current condition. The flight time from most European cities to Helsinki, Finland, is approximately 2 hours, and the drive from Helsinki to Kotka via the motorway is about 120 km (1 hour). You are welcome to visit us in person to inspect the foundry machinery! Second-Hand Condition: All machines, equipment, and articles are sold in a used condition. No Warranty, Exchange, or Guarantee: The seller does not offer any warranties or guarantees on the items sold. There is no option for exchange or refund, so the buyer accepts any risks associated with the purchase. As Inspected On Site: The buyer must inspect the goods on-site before making the purchase, as the sale is final once inspected. The seller will not be held responsible for any defects found after the purchase.

Condition: new, TECHNICAL DATA Gas-fired preheating furnace, make VEI type: VEI_KO_V_GB_400-350 temperature: 350°C burners power: 2 x 200 kW Dcjdpfxefbgz Ie Adren fans: 2 x 4 kW useable dimensions x 2 (h x d x w): 1.000 x 1.400 x 2.800 mm

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology Dcedpfx Adof Aaaljrjn User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Year of construction: 2025, condition: new, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ Dsdpfx Aeyg H Dzedrecn 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps Dcjdpfxjflpmqo Adrjn The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Condition: new, Year of construction: 2026, functionality: fully functional, Ball Mill with Air Classifier: The Ultimate Powder Processing Equipment In the world of industrial powder production, precision, efficiency, and flexibility are paramount. Whether producing ultra-fine powders for high-tech applications or coarser materials for everyday products, the combination of a Ball Mill with Air Classifier offers unparalleled performance. This dynamic duo provides a comprehensive solution for industries ranging from chemicals and ceramics to paints, plastics, and pharmaceuticals. This article introduces the ball mill with an air classifier, explores its applications, and highlights the key advantages of this essential powder equipment. General Introduction to Ball Mill with Air Classifier ball mill with air classifier is an advanced grinding and classification system designed for efficient, high-quality powder production. The system consists of two main components: 1. Ball Mill: A cylindrical grinding device filled with grinding media (such as steel balls) that operates by rotating around its axis. The raw material is reduced to smaller particle sizes through impact and friction within the mill. 2. Air Classifier: A sophisticated device that separates particles based on size using airflow. Fine particles are carried away, while coarser particles are returned to the ball mill for further grinding. The combination of these two components creates a closed-loop system that ensures consistent particle size distribution, high efficiency, and minimal waste. Applications of Ball Mill with Air Classifier The ball mill with air classifier is a versatile solution used in a wide range of industries to process various materials. Key applications include: 1. Mineral Processing The system is widely used in the production of minerals such as calcium carbonate, quartz, feldspar, and talc. These finely ground minerals are essential for industries like ceramics, paints, plastics, and rubber. 2. Cement and Construction Materials Cement and other construction materials require precise particle size control for optimal performance. The ball mill with air classifier ensures uniformity and enhances the quality of construction materials. 3. Chemicals and Pharmaceuticals Fine powders play a critical role in the chemical and pharmaceutical industries. From active pharmaceutical ingredients (APIs) to industrial chemicals, this system delivers the consistent quality required for these applications. 4. Paints, Coatings, and Pigments The production of paints and coatings demands ultra-fine powders to achieve smooth finishes and vibrant colors. The ball mill with air classifier produces high-quality powders for superior results. #### 5. Food and Agriculture Food-grade powders such as additives, preservatives, and agricultural products like fertilizers can be efficiently processed using this system, meeting stringent regulatory requirements. Industries That Benefit from Ball Mill with Air Classifier Several industries rely on the capabilities of this system to produce fine powders with specific characteristics: Dcedpjvlwkxofx Adrjn - Ceramics: Produces high-purity powders for tiles, insulators, and advanced ceramics. - Rubber and Plastics: Creates fillers and additives for improved durability and performance. - Pharmaceuticals: Ensures consistent particle size for APIs and excipients. -Construction: Delivers materials for concrete, plaster, and other applications.

Year of construction: 2020, condition: new, Pneumatic connection 1 " • Controls 7 "color touch panel • Paint tank capacity 6-7 kg • Air consumption during painting 15Nm3 / h • Air consumption for cleaning 350Nm3 / h • Hopper paint level sensor Yes • Ultrasonic screener Yes • Powder injectors up to 12 pcs Description • RP-01 pump for topping up the paint with fresh paint from cardboard • Two modes of operation, paint recovery with mixing or total waste Djdpefz Dkgofx Adrscn • Sealed fluidization paint hopper • Automatic program for cleaning the tank and injectors with compressed air • Hopper powder level sensor assembly • Automatic refilling of the tray with paint from cardboard • Paint level sensor in refill box • An audible alarm alerts the operator when there is low paint in the box • The center is connected with the cabin control via ModBus protocol • Programmable powder suction valve to keep the powder center clean

Year of construction: 2020, condition: new, Touch control ROMER cabins are equipped with 4 "color touch displays. Operation of the cabin is intuitive, takes place in 3 modes, automatic (time), automatic (based on a clogged filter sensor), or manual Filter clogging sensor A sensor is installed in the cabins, which queues the filters for cleaning when they become clogged. The system also informs you when the filters have worn out Automatic filter cleaning The electronic system for automatic filter cleaning has a range of cleaning frequency and shot time adjustment. Each of the filters is cleaned separately, the filters can also be cleaned manually using the buttons. We know from experience that it is difficult for the operator to enforce filter cleaning. Thanks to this system, the operator will not have to think about it anymore. Low volume Aluminum fans are very quiet, they work at the level of 74-79dB - It's not much. Dcsdjfz A Iwspfx Adrsn with the standard cabin structure, it's even hard to talk. Broaching machine through the cabin By dragging the suspension beams within the cabin, the cabin improves work efficiency, thus relieving the painter who no longer has to move them by hand. Explosion-proof design The booths are designed to prevent the formation of an explosive mixture during the painting process. Each of the components has been carefully selected to minimize this risk.

Year of construction: 2020, condition: new, 7 "Touch Panel The large color touch panel looks aesthetically and is comfortable and intuitive to use. You will set all important parameters on it. Memory of 20 programs with 10 events It is possible to save up to 20 programs and activate up to 10 consecutive time-temperature events arranged in the heating curve. This is especially needed for more demanding processes. Information on gas / oil consumption The consumption is calculated based on the burner settings. This feature will allow you to estimate the cost of a given cycle, plan consumption and check personnel. Dual-channel recorder of USB cycle parameters Each furnace is equipped with a recorder that records all firing parameters, including two temperature channels - like in an airplane black box, on a USB flash drive. The system also enables the analysis of monthly / daily statements, including media consumption and performance. Each start of heating, opening the door, can be recreated, a few years back. Such a dedicated option is not offered by any manufacturer. It is a system developed from scratch by our programmers Automatic smoke exhaust chimney The chimney can be programmed to open a few minutes before the end of the firing in order to smoke the chamber. It can be remotely controlled from the panel, it does not need to be done mechanically as in most structures. Minute forecast until the end The cycle has started, how long will it end? calculating the heating dynamics, we will count it and show on the display how much longer it will take. To open it, just pull the door. The lock has adjustable pressure of the door, to close it just push it, the lock will catch the door and automatically pull it back. In order to minimize the effect of heating the hall when opening the door, a hood is installed above the door to remove some of the heat to other places. The MTS system was created to provide a real reading of the temperature of the furnace chamber. Standard measurement is based on one temperature measurement which is often wrong.MTS is a system of many sensors located in the outermost places of the chamber. The multi-zone heating system ensures a firing quality that has been so far unique. Each normal oven has only one heating zone and only one temperature measurement! The multi zone heat system supports up to 8 independent heating zones in one oven. Each heating zone has as many as 3 temperature sensors! Dcedpjfz U Tqefx Adron When there are temperature differences between zones, they are automatically equalized! The system helps to combat the problem when elements of different material thicknesses enter the furnace.

Condition: new, Spare parts category: safety mat for CNC Allen Bradley Lignum 1600x 800 Brand: safety mat for CNC Allen Bradley Lignum 1600x 800 Model: safety mat for CNC Allen Bradley Lignum 1600x 800 Description: safety mat for CNC Allen Bradley Lignum 1600x 800 Allen Bradley Lignum CNC safety mat new, thickness: [value missing] series: 440-F, range: MatGuard, length: 1.5m, width: 1m, thickness: 16mm, Plastisol vinyl, IP67 Allen Bradley protective mat, length 1.5 m, width 1 m - 440F-M2030BYNN The Allen Bradley series MatGuard safety mat from Rockwell Automation is a safety device that detects human presence in hazardous areas. It can be connected to the control circuits of industrial machinery in hazardous environments, creating a protected area of 1.5 m (length) x 1 m (width). When the mat's detection surface senses a person, it sends a signal that shuts down the machine, preventing injury and increasing workplace safety. The durable vinyl material is resistant to bleach, acids, and other industrial chemicals, making it a suitable choice for use in demanding industrial settings. This mat is commonly used to restrict access to hazardous areas in factories. Features and advantages: • Hardened sheet steel construction increases durability. • 4-wire open and short-circuit detection system for enhanced electrical safety. • Can withstand a high static pressure of 4,500 psi (pounds per square inch) for use in heavy-duty applications. Standards and certifications: • CSA (Canadian Standards Association) • ISO13849-1 (International Organization for Standardization) • IEC/EN60204-1 (International Electrotechnical Commission) • TÜV (Technischer Überwachungsverein) Is this mat safe to use in damp or wet areas? IP67 rating CE certified TUV certified CSA certified cULus approved EN1760-1 EN954-1 ISO 13849-1 IEC/EN60204-1 ANSI RIA R15.06 ANSI/B11.19 AS4024.5 The mat is rated IP67 (ingress protection), meaning it is protected against dust and can be water-resistant for up to 30 minutes. This makes it safe for use in humid environments. Technical specifications: Attribute Parameter MatGuard Range 440-F series Protected area 1500 x 1000mm Length 1.5m Width 1m Thickness 16mm Dodpfxez Eggvs Adrscn Mat material Plastisol vinyl IP rating IP67 Year: 2023

Year of construction: 2020, condition: new, Touch control ROMER cabins are equipped with 4 "color touch displays. Operation of the cabin is intuitive, takes place in 3 modes, automatic (time), automatic (based on a clogged filter sensor), or manual Filter clogging sensor A sensor is installed in the cabins, which queues the filters for cleaning when they become clogged. The system also informs you when the filters have worn out Automatic filter cleaning The electronic system for automatic filter cleaning has a range of cleaning frequency and shot time adjustment. Each of the filters is cleaned separately, the filters can also be cleaned manually using the buttons. We know from experience that it is difficult for the operator to enforce filter cleaning. Thanks to this system, the operator will not have to think about it anymore. Low volume Aluminum fans are very quiet, they work at the level of 74-79dB - It's not much. with the standard cabin structure, it's even hard to talk. Broaching machine through the cabin Dcsdofzciqopfx Adrsn By dragging the suspension beams within the cabin, the cabin improves work efficiency, thus relieving the painter who no longer has to move them by hand. Explosion-proof design The booths are designed to prevent the formation of an explosive mixture during the painting process. Each of the components has been carefully selected to minimize this risk.

Condition: new, Year of construction: 2025, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 Djdpfofy T Spex Adrjcn ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Year of construction: 2020, condition: new, Touch control ROMER cabins are equipped with 4 "color touch displays. Operation of the cabin is intuitive, takes place in 3 modes, automatic (time), automatic (based on a clogged filter sensor), or manual Filter clogging sensor A sensor is installed in the cabins, which queues the filters for cleaning when they become clogged. The system also informs you when the filters have worn out Automatic filter cleaning The electronic system for automatic filter cleaning has a range of cleaning frequency and shot time adjustment. Each of the filters is cleaned separately, the filters can also be cleaned manually using the buttons. We know from experience that it is difficult for the operator to enforce filter cleaning. Thanks to this system, the operator will not have to think about it anymore. Low volume Aluminum fans are very quiet, they work at the level of 74-79dB - It's not much. Dsdpfxefz I Ehe Adrscn with the standard cabin structure, it's even hard to talk. Broaching machine through the cabin By dragging the suspension beams within the cabin, the cabin improves work efficiency, thus relieving the painter who no longer has to move them by hand. Explosion-proof design The booths are designed to prevent the formation of an explosive mixture during the painting process. Each of the components has been carefully selected to minimize this risk.

Year of construction: 2020, condition: new, Pneumatic connection 1 " • Controls 7 "color touch panel • Paint tank capacity 6-7 kg • Air consumption during painting 15Nm3 / h • Air consumption for cleaning 350Nm3 / h • Hopper paint level sensor Yes • Ultrasonic screener Yes • Powder injectors up to 12 pcs Description • RP-01 pump for topping up the paint with fresh paint from cardboard • Two modes of operation, paint recovery with mixing or total waste Dodpefz U Saofx Adrecn • Sealed fluidization paint hopper • Automatic program for cleaning the tank and injectors with compressed air • Hopper powder level sensor assembly • Automatic refilling of the tray with paint from cardboard • Paint level sensor in refill box • An audible alarm alerts the operator when there is low paint in the box • The center is connected with the cabin control via ModBus protocol • Programmable powder suction valve to keep the powder center clean

Year of construction: 2020, condition: new, 7 "Touch Panel Dcsdpfxsfz U Hve Adrsn The large color touch panel looks aesthetically and is comfortable and intuitive to use. You will set all important parameters on it. Memory of 20 programs with 10 events It is possible to save up to 20 programs and activate up to 10 consecutive time-temperature events arranged in the heating curve. This is especially needed for more demanding processes. Information on gas / oil consumption The consumption is calculated based on the burner settings. This feature will allow you to estimate the cost of a given cycle, plan consumption and check personnel. Dual-channel recorder of USB cycle parameters Each furnace is equipped with a recorder that records all firing parameters, including two temperature channels - like in an airplane black box, on a USB flash drive. The system also enables the analysis of monthly / daily statements, including media consumption and performance. Each start of heating, opening the door, can be recreated, a few years back. Such a dedicated option is not offered by any manufacturer. It is a system developed from scratch by our programmers Automatic smoke exhaust chimney The chimney can be programmed to open a few minutes before the end of the firing in order to smoke the chamber. It can be remotely controlled from the panel, it does not need to be done mechanically as in most structures. Minute forecast until the end The cycle has started, how long will it end? calculating the heating dynamics, we will count it and show on the display how much longer it will take. To open it, just pull the door. The lock has adjustable pressure of the door, to close it just push it, the lock will catch the door and automatically pull it back. In order to minimize the effect of heating the hall when opening the door, a hood is installed above the door to remove some of the heat to other places. The MTS system was created to provide a real reading of the temperature of the furnace chamber. Standard measurement is based on one temperature measurement which is often wrong.MTS is a system of many sensors located in the outermost places of the chamber. The multi-zone heating system ensures a firing quality that has been so far unique. Each normal oven has only one heating zone and only one temperature measurement! The multi zone heat system supports up to 8 independent heating zones in one oven. Each heating zone has as many as 3 temperature sensors! When there are temperature differences between zones, they are automatically equalized! The system helps to combat the problem when elements of different material thicknesses enter the furnace.

Year of construction: 2019, condition: new, Preparation of a written offer / cost estimate for a powder coating system from the company Romer. Dcodpfx Adjc Sd D Sjron

Condition: good (used), Glasbeek Finish Gas Chamber Furnace, Type 003.05 Manufacturer: Glasbeek Finish Type: Gas Chamber Furnace Heating / Medium: Natural Gas Dedsd Spx Djpfx Adrjcn Type 003.05 With loading trolley Maximum temperature: 200 °C Burner type / Forced-air burner Manufacturer: Dreizler Type: M 06.2-95 Type: Forced-air burner Modulating operation Burner output: 40-110 kW Gas family: Natural gas Category: 12L Connection pressure: max. 100 mbar Power connection: 220/230 V / 50 Hz Motor power: 0.27 kW Electrical power consumption: 0.6 kW Fire chamber pressure: 1.6 mbar Burner number: 0201756 Year of manufacture: 2002 Dimensions Internal dimensions approx. W 1900 mm x D 2950 mm x H 1800 mm External dimensions approx. W 2530 mm x D 3300 mm x H 2800 mm You can find more items – new and used – in our shop! International shipping costs available upon request!

Condition: new, Year of construction: 2026, functionality: fully functional, The system is a fully integrated, automated industrial powder coating line engineered for high-throughput production, process stability, and superior surface finishing quality. It combines a multi-stage chemical pretreatment washer, a high-efficiency electrostatic powder coating booth, a controlled thermal curing oven, and an overhead rail conveyor system designed for continuous or indexed part transportation. The chemical pretreatment washer is designed as a multi-stage surface preparation unit, including degreasing, rinsing, phosphating, and passivation phases. It is constructed from high-grade stainless steel (AISI 304/316) to ensure long-term chemical resistance and structural durability. High-pressure centrifugal pumps along with optimized spray nozzle arrays guarantee full and uniform coverage of complex geometries. The system incorporates closed-loop chemical recirculation, advanced filtration units, and automatic monitoring of pH, conductivity, and bath temperature, ensuring consistent surface activation while minimizing chemical consumption and operational waste. The electrostatic powder coating booth is designed for maximum transfer efficiency and minimal material loss. It features a high-performance powder recovery system (cyclone or cartridge filtration type), achieving recovery rates above 95%, which significantly reduces operating costs. The booth is constructed with anti-static architecture to prevent powder build-up and to ensure stable electrostatic field distribution. It is fully compatible with both manual and automatic spray gun systems, enabling flexible integration depending on production requirements. The curing oven is a high-performance thermal system designed to provide uniform heat distribution across the entire chamber, with temperature deviation controlled within ±2°C. It operates with forced convection airflow using high-efficiency industrial fans, ensuring homogeneous curing conditions for all coated parts. The heating system can be configured with gas, diesel, or electric resistance elements, depending on the available energy infrastructure. High-density insulated panels minimize thermal losses, while PLC-based control allows precise management of curing profiles and process repeatability, ensuring optimal polymer cross-linking and defect-free surface finishes. Dcsdpfxsy Htg De Adrsn The overhead conveyor system provides continuous or step-by-step transport of parts throughout all process stages. It is constructed with heavy-duty chains and high-temperature resistant components suitable for demanding industrial environments. The system includes variable speed control to optimize dwell times in each process zone, enhancing throughput efficiency and process synchronization. Its ergonomic design minimizes manual handling while maximizing production flow stability. From an engineering standpoint, the complete line is designed for maximum operational efficiency, reduced lifecycle cost, and high process reliability. Energy-optimized thermal systems, chemical recovery circuits, and high transfer efficiency coating technology significantly lower total operating expenses while maintaining consistent coating quality. The modular architecture allows for future expansion and customization, making the system suitable for scalable industrial applications.