Used Rosenboom Toolholder for sale (304)

Condition: used, Year of construction: 1998, liter capacity 250 l/min conveying height ca. 2 m coolant capacity 500 l Hfedpfx Ajzawgyoc Njh total power requirement 16 kW weight of the machine ca. 0,45 t dimensions of the machine ca. 2,0 x 0,8 x 1,6 m Used mobil filter system for cleaning of coolant - take the dirty coolant out of the machine - clean the fluid with a band filter - use the 500 l tank - take cleaned cooland back to the tool machine - or use the high pressur gun to clean up the machine

Condition: used, Year of construction: 2001, controller manufacturer: Heidenhain, controller model: MillPlus, _____ Description: Year of manuf. : 2001 Control : Heidenhain MillPlus Speed : 18000 rpm Movement X/Y/Z : 630/560/560 mm Tool holder : SK 40 Spindle: Technology:Motorspindle Speed:18.000 rpm Power (max.):35 kW Torque (max.):119 Nm Taper:SK40 Workingtable: Clamping surface:1.000 x 600 mm Tableloading (max.):400 kg In general: Toolmagazine:2x 10 stations Rapid travers in X/Y/Z:26/26/20 m/min Equipment/Accessory: Chipmanagement:Chiptrumpet Coolingmanagement:Cooling unit Oilmistseparation:Mechanical extraction, Hör AFS 1100 4.-Axis:Magerl Rotomatik 120 with Counterbearing Hfedpfx Ajzbzchec Noh Processobservation:Operation mode 4 Setup operations:Electronical handwheel Further Equipment:Spindlechiller, Rinsing pistol Further Accessory:Misc. used Toolholder SK 40

Condition: used, Year of construction: 1999, controller manufacturer: Heidenhain, controller model: MillPlus, _____ Description: Year of manuf. : 1999 Control : Heidenhain MillPlus Speed : 12000 rpm Movement X/Y/Z : 800/650/550 mm Spindle: Technology:Motorspindle Speed:12.000 rpm Power (max.):15 kW Torque (max.):130 Nm Taper:SK40 Hfjdpfx Aozbzcbec Neh Workingtable: Clamping surface:1.100 x 650 mm Tableloading (max.):600 kg In general: Toolmagazine:25 stations Rapid travers in X/Y/Z:18/18/15 m/min Equipment/Accessory: Chipmanagement:Chip tray Coolingmanagement:Coolant pump Oilmistseparation:Electrostatic extraction, W+W EL-FI 1000 Further Equipment:Rinsing pistol Further Accessory:Misc. used Toolholder SK 40

Condition: used, Year of construction: 2000, Technical details: turning diameter: 800 mm turning length: 2965 mm max. turning dia. over saddle: 520 mm spindle bore: 92 mm turning speed range: 3 - 1800 U/min spindle head: Größe 11 total power requirement: 37 kW weight of the machine ca.: 6,5 t dimensions of the machine ca.: 5,2 x 2,2 x 1,9 m Teach In Control MTC-K Hfedpfx Aexxig Uoc Nsh 3-jaw chuck ROTAS Dia. 400 mm face plate RÖHM Dia. 630 mm 4-station toolholder system PARAT 1 fixed steady coolant attachment and chip conveyor *

Condition: used, Year of construction: 1991, Technical details: turning diameter over bed: 570 mm turning diameter over slide rest: 365 mm turning length: 2000 mm feed per revolution: 0,06 - / 0,03 - 28 mm spindle turning speed range: 11,2 - 2240 U/min spindle bore: 62 mm spindle head: 8 nach DIN 55022 total power requirement: 15 kW weight of the machine ca.: 4,8 t dimensions of the machine ca.: 4,5 x 1,5 x 1,4 m Hfsdpfxjx D Ufmj Ac Neh with digital readout HEIDENHAIN rapid feed, MULTIFIX toolholder system fixed steady dia. 160 mm 3 jaw chuck RÖHM TR 250 coolant attachment diverse toolholders, diverse jaws *

Condition: used, Year of construction: 1990, Technical details: turning diameter: 445 mm turning length: 2000 mm turning diameter over bed slide: 660 spindle bore: 65 mm spindle speeds:: 16 - 3150 U/min. rapid motion - x-axis: 10 mm/min rapid traverse Z-axis: 15 m/min total power requirement: 34 kW weight of the machine ca.: 7,5 t dimensions of the machine ca.: 6 x 2,5 x 2,2 m with CNC Control TX 8 D C-axis driven tooling 14 station turret head 3 jaw chuck dia. 315 mm tailstock, steady as NC-axis diverse driven toolholders diverse turning toolholders chip conveyor and coolant attachment Hodpsw I R Ndefx Ac Nsfh *

Condition: used, Year of construction: 1999, Technical details: x-travel: 1250 mm y-travel: 880 mm z-travel: 800 mm control: Heidenhain TNC 430 tool change unit: 60 Pos. Tool bore: SK 50 turning speeds: 8000 1/min size of pallet: 1000 x 800 mm total power requirement: 56 kVA weight of the machine ca.: 14,3 t Hsdpfotq Nlcjx Ac Nsfh dimensions of the machine ca.: 5,5 x 3 x 3,1 m 5-axis machine with controlled universal milling head (B-axis), 2-palett changer incl. 2 palets, 1000 x 800 mm Production package: - internal coolant supply 40 bar with 900l coolant box (2,25 x 1.3 x 2,2m / 950kg), - chipconveyor (4,85 x 1,2 x 1,75m / 600kg), - ROTOCLEAR, - 3D touchprobe RENISHAW MP 10 - 60 pos. ATC SK 50 - el. handwheel - mech. tool-breakage control, accessories (SK 50 toolholders approx. 100.200 h "machine on", approx. 52.200 h "spindle on", last spindle change in 2020 *

Condition: good (used), functionality: fully functional, spindle bore: 37 mm, turning diameter: 250 mm, turning diameter over bed slide: 250 mm, center height: 125 mm, turning length: 1,000 mm, total length: 1,500 mm, total width: 800 mm, total height: 1,200 mm, spindle speed (max.): 2,000 rpm, rotational speed (max.): 2,000 rpm, Manufacturer: Harrison Model: M-250 Condition: Used Maximum turning diameter over bed: 250 mm Maximum turning length between centers: 1000 mm Spindle bore: 37 mm Maximum spindle speed: 2000 rpm Spindle mount: Camlock Toolholder type: Drehblitz Machine dimensions (L x W x H): 150x80x120 Connection voltage: 400 V Cooling system: Yes Hedpfx Aox Rrpfjc Nsfh Digital readout: Yes, 2 axes

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, turning length: 532 mm, turning diameter over cross slide: 500 mm, turning diameter: 325 mm, spindle speed (max.): 3,500 rpm, spindle bore: 65 mm, travel distance X-axis: 195 mm, travel distance Z-axis: 430 mm, rapid traverse X-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, rotational speed (max.): 5,000 rpm, total length: 2,875 mm, chuck outer diameter: 260 mm, total width: 1,675 mm, spindle nose: A2-8, overall weight: 4,650 kg, Equipment: documentation/manual, rotational speed infinitely variable, We have acquired this HWACHEON HI-TECH 200BL MC directly from production in working condition—see the video of the machine operating prior to dismantling. The machine is very comprehensively equipped and comes standard with: - C-axis + driven turret (both positions). - Renishaw probe. - Chip conveyor + collection bin. - Röhm 3-jaw chuck (DURO-NC 260/3) including 2 sets of top jaws. - 13 EWS toolholders, 4 of which are driven. - Various clamping sleeves and collets. - Original HWACHEON and FANUC documentation. The machine can be inspected under power in our showroom! Hfedpfx Asypc H Roc Njh

Condition: new, Year of construction: 2026, functionality: fully functional, KRAFT FB-15/20/25/30 Facing Lathe – Factory New · 1,500–3,000 mm Face Plate · CNC or Conventional BRAND NEW KRAFT FB SERIES FACING LATHE — FOR LARGE FACEPLATE WORKPIECES UP TO 2 TONS (OVERHUNG) The KRAFT FB Series is designed for cost-effective machining of large, flat components such as brake discs, flanges, wheels, bearing rings, or drum parts. Four models cover swing diameters from 1,500 to 3,000 mm and permit overhung workpiece weights up to 2 tons, ideal for single-part and medium batch production. Available as conventional or CNC models (Siemens, Fanuc, or Fagor), with or without tailstock, and with longitudinal or cross beds. KEY FEATURES Heavy-Duty Construction - Machine bed cast in one piece from MEHANITE, bed width 450 mm, heavily ribbed - Hardened and stress-relieved bed slideways - Ensures durable, highly precise machining without deformation High-Precision Main Spindle — G1 Accuracy Class - Induction hardened, spindle bore up to 230 mm (option) - Compact spindle housing, widely ribbed for stability Powerful Drive - Spindle motor 22 kW (29 kW option), up to 600 rpm, high torque - Infinitely variable spindle speed as standard CNC-Ready Ex Works - X/Z servomotors by Fanuc or Siemens - Ball screws X: Ø25 P5 C3, Z: Ø40 P10 C5 - Rapid traverse X/Z: 6/8 m/min Overhung Workpiece Machining — The Facing Lathe Advantage - Workpieces are clamped directly on the spindle head, no tailstock required - Optimized for flat, disc-shaped components with large diameters OPTIONS CNC Siemens/Fanuc/Fagor · Constant cutting speed · PARAT toolholder · C-axis & driven tools/milling unit · Tailstock · Spindle bore Ø 230 mm · 29 kW spindle motor MACHINE DATA — FOUR MODELS KRAFT FB-15 - Swing diameter/faceplate: 1,500 mm Hfjdpfx Aec Txdhjc Nsh - Spindle speed: 4–600 rpm - Z travel: 1,000 mm - Servomotors X/Z: β12/3000i 1.8 kW / β22/3000i 3 kW - Weight: approx. 7,000 kg, Dimensions: 2200 × 2200 × 2500 mm KRAFT FB-20 - Swing diameter/faceplate: 2,000 mm - Spindle speed: 4–600 rpm - Z travel: 1,000 mm - Servomotors X/Z: β12/3000i 1.8 kW / β22/3000i 3 kW - Weight: approx. 7,500 kg, Dimensions: 2200 × 2600 × 2750 mm KRAFT FB-25 - Swing diameter/faceplate: 2,500 mm - Spindle speed: 4–400 rpm - Z travel: 1,500 mm - Servomotors X/Z: 1FL6067 2.0 kW / 1FL6092 3.5 kW - Weight: approx. 8,000 kg, Dimensions: 2500 × 3000 × 3100 mm KRAFT FB-30 - Swing diameter/faceplate: 3,000 mm - Spindle speed: 4–400 rpm - Z travel: 1,500 mm - Servomotors X/Z: 1FL6067 2.0 kW / 1FL6092 3.5 kW - Weight: approx. 10,000 kg, Dimensions: 3000 × 3200 × 3350 mm COMMON SPECS FOR ALL SIZES Turning length: 330 mm · Max. workpiece length: 450 mm · Bed width: 450 mm · Overhung workpiece weight: max. 3,000 kg · Cross slide width: 250 mm · X travel: 330 mm · Spindle bore: 155 mm (230 mm opt.) · Spindle nose: A2-11 (A2-15 opt.) · Spindle taper: MT7 · 4 spindle speed ranges · Spindle motor: 22 kW (29 kW opt.) · Rapid traverse (X/Z): 6/8 m/min · 4-position tool turret, tool shank 32 × 32 mm CUSTOMIZED TO YOUR REQUIREMENTS Tell us your specific application — workpiece range, required accuracy, preferred CNC system — and we will configure the FB Series to your needs. Attractive leasing and hire-purchase conditions through our partners. Delivery including installation, commissioning, and operator training available on request.

Condition: used, x-travel 1000 mm y-travel 330 mm Hodey Ul U Njpfx Ac Nefh z-travel 500 mm table-size 1300 x 280 mm turning speed range 30- 1500 U/min power requirement 2,5 kW tool adaptor ISO 40 | feed speeds 13- 620 mm/min | weight 2,1 t range L-W-H 2,0 x 1,5 x 1,9 m Universal tool room machine with digital scale - turn- and swiveling v- head . h- spindle - automatic feed - hand wheels - coolant system - machine light

Condition: used, Year of construction: 1998, operating hours: 15,000 h, functionality: fully functional, machine/vehicle number: 94.98.030, feed length X-axis: 600 mm, feed length Y-axis: 500 mm, feed length Z-axis: 450 mm, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 450 mm, spindle speed (max.): 6,000 rpm, spindle speed (min.): 100 rpm, total height: 2,000 mm, total width: 2,000 mm, total length: 2,800 mm, table width: 520 mm, table length: 900 mm, position of the milling head: mittig, type of input current: three-phase, rotational speed (max.): 6,000 rpm, rotational speed (min.): 100 rpm, table load: 400 kg, overall weight: 3,500 kg, input voltage: 400 V, workpiece weight (max.): 100 kg, input current: 40 A, input frequency: 50 Hz, Equipment: documentation/manual, rotational speed infinitely variable, Good used CNC milling machine with low hours. Used exclusively for repairs and very small production runs. Extensive assortment of tool holders as shown in the photos, including vise, chucks, cutters, plates, and tap holders. Also equipped with a Benz high-speed spindle for wet operation up to 25,000 rpm. TECHNICAL DETAILS Drive power at 44% duty cycle: 15 kW Drive power at 100% duty cycle: 6 kW Max. torque: 50 Nm Machining spindles (vertical and horizontal) Max. spindle torque at 44% duty cycle: 800 Nm Number of gearbox stages: 4 Adjustable speed range (vertical and horizontal): 10 – 6,000 rpm Toolholder / pull stud: SK 40 / DIN 69871 Max. tool weight: 13 kg Tool diameter: 130 mm Automatic travel distances Spindle longitudinal feed (X-axis): 600 mm Spindle transverse feed (Y-axis): 500 mm Spindle vertical feed (Z-axis): 450 mm Feed drives (AC) Programmable feed rate X / Y-axis: 0 – 15,000 mm/min Programmable feed rate Z-axis: 0 – 12,000 mm/min Rapid traverse rate X / Y-axis: 15,000 mm/min Rapid traverse rate Z-axis: 12,000 mm/min Coolant tank capacity: 150 l Flow rate: approx. 20 l/min Clamping table Table size: 520 × 900 mm Number of T-slots: 4 T-slot width: 14 H7 Table load capacity: 400 kg Tool changer TCD 44 Tool stations: 22 Tool diameter: 80 / 130 mm Max. tool length: 350 mm Max. tool weight: 6 kg Max. workpiece weight in drum magazine: 200 kg Chip-to-chip time: 20-25 s Tool change time: 12 - 16 s Hodpfoywn Sijx Ac Nsfh Electrical connection data Total installed nominal power: 15.8 kW Usable and connected load: 12.3 kW Operating voltage and frequency: 3 × 400 V / 50 Hz

Condition: excellent (used), Year of construction: 2007, operating hours: 2,777 h, functionality: fully functional, Controller ULTIMAX 4 DSM Table size 762 x 355 mm X-travel 660 mm Hjdpszbx Dpjfx Ac Njfh Y-travel 356 mm Z-travel 456 mm Spindle speed 10000 rpm Tool holder type SK40 ATC-Magazin 16-fold Spindle power 11/9,4 kW Weight 2800 kgs Dimensions LxWxH = 1800 x 1600 x 2500 mm Accessories, features - Software options: DXF, rigid tapping, pocket/island, herical/ramp - Chip auger - Coolant tank - Machine mounths - RENISHAW zero point presetter system with touchprobe - Some SK40 toolholders - Towel lamp The machine has been checked by HURCO engineer. RENIOSHAW ballbar test has been made on X-Y axes and shows 13 um (like at new machine). Original spindle hours 2777!!!! Very good condition.

Condition: good (used), Year of construction: 2004, functionality: fully functional, Colchester CNC lathe Model Tornado T 220 S Year : 2004 Turning lenght : 540 mm. Turning diameter : 290 mm. Sving over bed : 510 mm. Hfodpfx Ajy T E Tcsc Neh RPM : 3500 Spindle borer : 66 mm. Tools in revolver :12 stk. Control : FANUC 21i - TB Chuck - Toolholder - Interface RS-232 C - Coolant

Condition: good (used), Year of construction: 1962, Centre lathe manufacturer VDF HEIDENREICH&HARBECK type: 24 RO, year of manufacture 1962, overhauled in 1992. Equipped with 3-axis digital readout Heidenhain, 250 mm Forkardt chuck, Multifix B toolholder. Centre height: 255 mm Swing over bed: 510 mm Swing over cross slide: 270 mm Distance between centres: 1000 mm Hjdpfjxziuwsx Ac Nefh Spindle bore: 55 mm Spindle speeds: 20 - 900 rpm, Motor power: 6.5 kW The machine is in good condition, electrical diagrams available. Required floor space: Length 3 m, Depth 1.2 m, Height 1.3 m, Weight approx. 1800 kg.

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, Weiler Praktikant 160 AC Precision center lathe, 3-axis digital display, Weiler with AC drive, stepless speed control, CE marking!!!!! Technical data: >> Year of construction 1995, Machine No. 3820 >> Center height 160 mm >> Distance between centers 650 mm >> Spindle speeds: up to 3000 rpm, stepless >> Spindle bore 40 mm >> Short taper spindle head DIN 55027, size 5 with bayonet lock >> Tailstock MK 3 >> Feeds from 0.02 to 0.63 mm/rev >> Possible threads: metric, inch, module, and diametral pitch >> Metric thread pitches from 0.25 to 8 mm >> Weight approx. 1000 kg >> Spindle brake can be activated >> Machine dimensions approx. 1.4 m x 1.55 m x 0.95 m, length 1.6 m Accessories and equipment: >> 3-axis digital display Weiler >> Quick-change toolholder system with toolholders from 2 to 28 mm, in 1 mm increments >> 3-jaw chuck 160 mm, new, with 2 sets of jaws >> Mulifix size A with 3 steel holders >> Electronic chip guard >> Machine feet >> Splash guard >> Bed stop For safety: Electronic chip guard for the main spindle, cover for the lead and feed screw, brake motor, 2 emergency stop switches, electrical safety switch for the gearbox About the machine: Hfjdpfxey Ulqwj Ac Neh Offered is a Weiler Praktikant AC center lathe with lead screw and feed screw, year of construction 1995, in very good condition. A very nice lathe with AC drive and stepless speed control of the main spindle. The slides all run very smoothly and evenly. Even at high speeds, the Weiler runs quietly. The Weiler has a CE marking. The machine comes from a training workshop. This newer generation of Weiler lathes is very user-friendly, and surfaces can be produced with a ground finish. The digital display makes working even easier and more precise. Take advantage of the opportunity to inspect this machine on-site while it is powered on and convince yourself of its condition.

Condition: used, Year of construction: 2010, turning diameter 700 mm turning length 1250 mm control Siemens 840 G Ergoline spindle passage 104 mm spindle speed: 4000 spindle motor 35/45 kW max. torque on the spindle 600/700 Nm Spindlespeed subspindle 4000 U/min milling head -swivable ° turning speed range - milling 00 U/min tool taper Capto C6 tool magazin: 36 y-axis +/- 200 mm mm weight of the machine ca. 18,5 t Used CNC- Lathe with sub- spindle and milling head Hodpfxey T R Rms Ac Nofh - milling head full axis + 1° clamping - chipconveyor - aircondition for elextric box - new milling spindle in 2025 - absolute scale X/Y/Z1 axis - Shop Mill dialig programming - 8/20 bar coolant programmable - band filter system - Bar package (Partscatcher, prepared for ba magazin) Machine sold without jaws.

Condition: good (used), Code: 0324 Brand: OMEC Model: 750 Automatic milling machine for dovetail joints on drawers and various furniture parts Hfjdpfxjytr Sds Ac Neh Technical data: Useful working width 480 mm Thickness of drawer fore parts 60 mm Number of joints per minute: at 1st speed 25 , at 2nd speeds 35 Electric motor power of toolholder spindle 1,5 Hp Electric motor power trip traverse 1,5 Hp Overall dimensions mm 800 X 1300 X 1200 h Weight kg 350

Condition: used, Year of construction: 1969, turning diameter over bed 500 mm turning diameter over slide rest 330 mm turning diameter in the gap 600 mm turning length 3000 mm bed width 505 mm spindle bore 72 mm spindle head DIN 55022 Gr. 8 taper in tailstock MK 5 turning speed range 22,4- 1120 U/min power requirement 18,5 kW dimensions 5,3 x 1,75 x 1,53 m weight of the machine ca. 5,2 t used lathe in nice condition with digital scale - 2 axis digital scale - 4 jaw chuck Ø 250 mm - 3 jaw chuck Ø 260 mm - Multifix "C" toolholder system Hfsdpsy Tyy Defx Ac Nsh - some toolholders - steady

Condition: used, Year of construction: 1963, turning diameter over bed 390 mm turning diameter over slide rest 190 mm Hedjy Tyyqepfx Ac Nofh turning length 1000 mm turning dia. in gap 460 mm spindle head DIN 55026 Gr. 6 spindle bore 52 mm turning speed range 11,2 - 2240 U/min power requirement 7,5 kW bed width 355 mm dimensions 2,8 x 1,3 x 1,6 m weight of the machine ca. 1,9 t Equipment: - Multifix "B" with 5 pic. toolholders - 3-jaw-chuck Ø 250 - coolantsystem - 2-axis digital readout Heidenhain - some jaws

Condition: used, Year of construction: 2011, x-travel 1016 mm y-travel 660 mm z-travel 635 mm control Haas table surface area 1.372 x 610 mm table load 1.814 kg rapid traverse 18 m/min turning speed range 7.500 U/min power capacity - milling spindle 22,4 kW tool taper SK 50 | no. of tools in the magazine 30 Stück weight of the machine ca. 7,5 t dimensions 3,5 x 2,47 x 2,98 m Vertical Machining Center for spare parts electric false - chipconveyor Hodpfxswvl Ape Ac Nsfh - external handwheel - Dual tool change arm - internal coolant - filter

Condition: used, Year of construction: 2008, x-travel 1016 mm y-travel 660 mm z-travel 635 mm control Haas table surface area 1.372 x 610 mm table load 1.814 kg rapid traverse 18 m/min turning speed range 7.500 U/min power capacity - milling spindle 22,4 kW tool taper SK 50 | no. of tools in the magazine 30 Stück weight of the machine ca. 7,5 t dimensions 3,5 x 2,47 x 2,98 m Vertical Machining Center for spare parts Electric false - chipconveyor - external handwheel Hsdpfx Acewvl Aij Nofh - Dual tool change arm - internal coolant - filter - Oil dust collector

Condition: ready for operation (used), Year of construction: 2014, travel distance X-axis: 762 mm, travel distance Y-axis: 435 mm, travel distance Z-axis: 510 mm, controller manufacturer: SIEMENS, controller model: Sinumerik 828D, table load: 600 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 18,500 W, number of slots in tool magazine: 30, tool weight: 8,000 g, number of axes: 3, This 3-axis DOOSAN DNM 400 II was manufactured in 2014. It features an X-axis travel of 762 mm, Y-axis travel of 435 mm, and Z-axis travel of 510 mm. The machine includes a worktable with dimensions of 920 mm x 435 mm and a maximum table load of 600 kg. If you are looking to get high-quality machining capabilities, consider the DOOSAN DNM 400 II vertical machining centre we have for sale. Contact us for further details. • Capacity and travels: • Spindle nose to table: 150–660 mm • Worktable: • Size: 920 x 435 mm (36.2" x 17.1") • Spindle: • Max torque: 117 N·m (86.3 ft-lbs) • Taper: BIG-PLUS Dual Contact #40 (BT40 / CAT40) • Cooling: Through-spindle coolant (included) • Automatic Tool Changer (ATC): • Capacity: 30 tools (cam-type double arm) • Tool-to-tool time: 1.3 s • Max tool length: 300 mm • Feed rates and motion: • Rapid traverse (X/Y): 36 m/min (1,417 IPM) • Rapid traverse (Z): 30 m/min (1,181 IPM) • Max cutting feedrate: 10,000 mm/min Additional equipment • Workpiece clamps, tools, and toolholders available at additional cost (not included) Hjdpfx Asy T I Snoc Nsfh Technical Specification Taper Size BT 40

Condition: new, Year of construction: 2026, clamping range J) 50- 115 mm clamping range A) 170- 260 mm internal diameter 110 mm external diameter 176 mm Hfjdpsy Tbhvjfx Ac Njh weight 3,3 kg Unused jaw turning ring - switchable jaws for bigger clamping range - mainly for chucks up to Ø 250 mm

Condition: ready for operation (used), Year of construction: 2018, operating hours: 2,547 h, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, spindle speed (max.): 10,000 rpm, number of axes: 3, This 3-axis HAAS VF-4 was manufactured in 2018. It features a maximum spindle speed of 10,000 RPM and impressive travels of 1270 mm in the X-axis, 508 mm in the Y-axis, and 635 mm in the Z-axis. The machine includes cooling through the spindle. If you are looking to get high-quality machining capabilities, consider the HAAS VF-4 vertical machining centre we have for sale. Contact us for further details. • Cooling through the spindle (CTS) included Hsdpfx Acoy Txkzo Nefh Additional equipment • Toolholders and workpiece clamps available separately (not included; can be purchased for an additional amount)