Used Rotating Centre Punch (28129) for sale (11,581)

Condition: used, Year of construction: 2022, load capacity: 5,000 kg, lifting height: 20,700 mm, total length: 8,830 mm, Rotating forklift Magni RTH 5.21-D/D Drive Diesel Year built 2022 Ppjdpfxey Uzq Ts Afgst Lifting height (mm) 20,700 Lifting weight (kg) 5,000

Condition: good (used), functionality: fully functional, Punching force: 1000 kN Throat depth: 760 mm Pjdey U Dtkepfx Afgopt Stroke release via foot switch

Condition: used, machine/vehicle number: 007734, X axis working area: 3050 mm Y axis working area: 850 mm Podpfx Ajw Idb Hefgspt Main Electrospindle power: 5 KW Total number of drilling spindles: 19

Condition: used, machine/vehicle number: 007289, X axis working area: 3200 mm Y axis working area: 900 mm Main Electrospindle power: 4.5 KW Number of controlled axes: 3 axes Ppedpfxowukyqo Afgst Total number of drilling spindles: 16

Condition: used, Year of construction: 1991, Technical details: operating pressure: 160 bar distance between columns: 2000 mm Ppsdeu Icxdopfx Afgst throat: 1000 mm operating pressure: pneum. min/max 6/8 bar operating pressure: hydr. min/max 160/210 bar voltage: 380/50 V /Hz table surface area: 1900x1000 mm height over floor: 1000 mm tool clamping area: 1600x350 mm quantity of oil : 400 l total power requirement: 25,0 kW weight of the machine ca.: 7,1 t dimensions electric cabinet LxWxH: 1,0x0,3x1,4 m dimension machine xH: ca. L:2,2xB:3,4xH:2,2 m CLIP PUNCHING DEVICE or CUTTING PRESS or CLIP PRESS hydraulic - There are two machines on sale! - type of machine: folded punching device The machine has been used to punch holes in dashboards of cars. (incl. upper and lower tool) On the table are mounted the material intake and the sliding unit for the cut and hole punching. equipment: - light curtain - hydraulic pack - electric cabinet - control panel - workpiece counter - manual- and automatic operation possible - emergency stop On sale as is. i.D. *

Condition: used, Year of construction: 1994, Technical details: air pressure - required: 8 bar total power requirement: 14 kW machine weight ab.: 80-170/je Maschine kg MULTIFUNCTION PUNCH PRESS for alloy windows construction 3 pieces: Psdeu Icyhopfx Afgopt - for Schüco alloy window frame, post and beam profiles S65 - for Schüco alloy wing profiles for alloy window system ROYAL S 55, S 65 and S 70 - for Schüco alloy door profiles Royal S65 door base profiles - foot operation - pneumatic air gun AND - drilling automat for window construction application: - drill automat for door hinge - drill taper: for 8 pcs, usable tools 6 pcs, countersink drills with dia. 11/15mm approx. 80mm long - clamping operation via foot control and drilling via manual - accessories: diverse installation parts i.D. *

Condition: used, Year of construction: 1990, Technical details: Pressure: 63 t distance between columns: 200 mm stroke: 150 mm dayligth: 430 mm no. of strokes: 400 Hub/min T-slots H 12 650: 18 mm hole in table: 420x160 b x l mm ram surface area: 650 x 450 mm control: Wanske Tronicpress CNC passage of columns: 550x540 mm tank: 200 l stroke of ram - fixed: 100 mm ram diameter: 40 mm table height over floor: 1000 mm table: 600x450 mm table height over floor with metal base stand: 880 mm total power requirement: 30 kW weight of the machine ca.: 3,9 t Hydraulic automatic punching press for precision work (high-speed press) Ppjdpfx Afeu Icxqegjt - for punching, drawing, pressing, minting, bending, riveting, straightening, assembling - with hydraulic gripper feed type HS 150 and 7-roller straightener (moving) - Normal strips of approx. 0.4mm - 2.5mm thickness x approx. 160mm width, as well as narrow strips up to approx. 4mm can be processed. Feed length can be adjusted as required via the control unit. - with ram round column guide - with automatic central lubrication - High-speed: up to 400 strokes min-1 - motorized adjustable fixed stop (bottom can be adjusted by hand/motorized) - Operating modes such as continuous stroke and/or single stroke Equipment: - 1x hydraulic unit - 2x control cabinets *

Condition: used, Year of construction: 1974, Technical details: pressure: 30 t ram surface area: 450x250 mm ram adjustment: max. 50 (manual) mm strokes per minute: 20 - 120 stroke: ca./approx. 20 mm mm adjustment of stroke: nein/ no stroke adj. mm dayligth: Arbeitsraum: 220 - 280 mm Table surface area useable: 600 x 600 mm total power requirement: 7,5 kW weight of the machine ca.: 5,0 t dimensions L x W x H: Maschine: 1,8 x 1,2 x 2,7 m Dimensions (LxWxH): Schaltschrank: 0,92 x 0,46 x 1,4 m Automatic punching press 4 columns mechanical with feed unit with control panel passage widths: Column opening front=350mm and side=258mm Pedpfju Icx Rox Afgjpt *

Condition: used, Technical details: punching cross section in mm²: 45 kp/mm² table-size: 120x100 mm throat: 80 mm weight of the machine ca.: 15 kg space requirements of the machine approx.: 0,3x0,2x0,95 m Punching Press * Ppsdpfx Asu Icw Hjfgst

Condition: used, machine/vehicle number: 008469, X axis working area: 3050 mm Y axis working area: 850 mm Number of controlled axes: 3 axes Total number of drilling spindles: 19 Pedpfx Ajywafuefgopt Total number of tool changer positions: 4

Condition: used, Year of construction: 2012, y-axis 1.250 mm x-axis 1.300 mm Punching force 300 kN Overall size ca. 3,7 x 2,3 x 2,0 m weight ca. 7 t In our estimation, the machine is in like-new condition and can be inspected under power by appointment. - Includes various accessories Pjdpfx Asy T Sb Hofgjpt Accessories, as well as the tools and clamping devices shown in the images, are included in the scope of delivery only if explicitly noted in the additional information. Subject to changes, errors in technical data and specifications, and prior sale!

Condition: used, Year of construction: 2007, controller manufacturer: Heidenhain, controller model: iTNC 530, _____ Description: Year of manuf. : 2007 Control : Heidenhain iTNC 530 Speed : 12000 rpm Movement X/Y/Z : 1800/2000/1100 mm Tool holder : HSK 100 In General: Year of manufacture:2007 Control system:Heidenhain iTNC 530 Travel distances X/Y/Z:1,800/2,000/1,100 mm Rotational speed:12,000 rpm Media feed-through:Blast air + cooling lubricant Spindle: Technology:Motor spindle Speed:12,000 rpm Power:44 kW Ppedpfx Afjy Uqplsgst Torque:288 Nm Tool holder:HSK 100 NC swivel head: Technology:Universal milling head B-axis:0°-180° NC rotary table: Technology:Rotary table with pallet carrier C-axis:360° Clamping surface:1,600 x 1,400 mm Max. table load:4,000 kg Holding torque:approx. 17,000 Nm Tool magazin: Technology:Chain magazine Number of stations:120 Tool changer:Double gripper Equipment: Position sensors:Direct scales in all axes Chip disposal:Chip conveyor Coolant supply:Internal c oolant system, 40 bar Automation:2-fold pallet changer Workpiece measurement:Heidenhain touch probe Tool measurement:Blum Laser NT Kinematics measurement:3D quickSET Process monitoring:Operating mode 4 Emulsion mist separator:Mechanical

Condition: excellent (used), Year of construction: 1976, Iberica LM55 year 1976 format 100×70 B1 Ppjdpfxeyzgr No Afgjt

Condition: excellent (used), Year of construction: 2002, Iberica JRK-105 Automatic Die Cutter Year – 2002 Maximum sheet size: 1050 x 750 mm Minimum sheet size: 400 x 350 mm Cardboard up to 1.5 mm Corrugated board up to 3 mm Clamping capacity: 9-17 mm Maximum speed: 8500 sheets/hour Ppedpfx Afoy Uwznsget Maximum pressure: 300 t Stripping section Separation section Centerline 1 mm plate Micro-adjustment

Year of construction: 2015, condition: ready for operation (used), functionality: fully functional, GBC Magnapunch Pro punching machine Operation: foot pedal or table switch Working width: 356 mm Formats: up to DIN A4 (oversized) Productivity: up to 49,000 sheets per hour Power supply: 230 V / 50 - 60 Hz Dimensions: 510 x 450 x 270 mm (D x W x H) Podpfx Aoy Tm Arofgept Weight: 50.3 kg

Condition: used, Tenoning spindle 1 St. Number of milling agregates 5 St. Spindle diameter 50 mm Weinig Unicontrol 11 Window System with Extensive Tooling ----- Optionally available (at additional cost): - Weinig Univar 6 Rebating Machine (Price upon request!) - Götzinger PowerDrill Drilling and Milling Center for Windows and Doors (Price upon request) Manufacturer's Technical Description: ----- Item 1: Weinig Unicontrol 11 Window System ----- Includes existing tooling sets: - IV 67 (Wood and Wood-Aluminum) - IV 77 (Wood and Wood-Aluminum) - IV 90 (Wood) Cross-cut Saw ----- With laser alignment light; motor power: 3 kW; spindle diameter: 40 mm; electronically variable spindle speed with brake: 3,000–6,000 rpm. Max. tool cutting circle: 400 mm Axial adjustment: 150 mm via NC axis Radial adjustment: pneumatic, to 8 positions for top edge rounding Horizontal Bottom Rounding Unit ----- Motor with brake: 1.5 kW; Spindle diameter: 20 mm; Clamping length: 25 mm Spindle speed: 9,000 rpm Max. tool cutting circle: 130 mm Axial adjustment travel: mechanically coupled with cut-off saw Radial adjustment travel: pneumatically controlled Tenoning and Slotting Spindle ----- With hydraulically clamped outboard bearing Motor power with brake: 15 kW Spindle diameter: 50 mm Spindle speed: 2,800 rpm Max. tool cutting circle: 400 mm Tool clamping length: 640 mm Axial adjustment travel: NC axis Home position below table: 5–10 mm Radial adjustment travel: fixed 1st Profiling Spindle (Climb and Conventional Milling) ----- Motor power with brake: 11 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Min. tool cutting circle: 140 mm; Max. tool cutting circle: 232 mm Tool clamping length: 400 mm (with outboard bearing) Axial adjustment travel: 350 mm (NC axis) Radial adjustment travel: NC axis Home position below table: 5–10 mm 2 feed rollers opposite the spindle; axial adjustment pneumatically controlled (8 positions) Horizontal Top Profiling Unit ----- Motor power with brake: 3.7 kW Spindle diameter: 40 mm Clamping length: 40 mm Spindle speed: 9,000 rpm Max. tool cutting circle: 130 mm Adjustment: pneumatic, to 8 positions (axial and...) radial 2. Profile Spindle ----- Motor power: 11 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Tool cutting circle: min. 140 mm, max. 232 mm Tool clamping length: 400 mm (with outboard bearing) Axial adjustment travel: 350 mm (NC axis) Radial adjustment travel: NC axis Ppodpjy T R Tuofx Afgjt Home position (below table): 5–10 mm Indexed guide fence with muntin support strip 2 feed rollers (opposite the spindle); axially pneumatically controlled (8 positions) Vertical Profile Milling Unit (Right-hand side, at machine end) ----- Motor power (with brake): 3.7 kW Spindle diameter: 40 mm Clamping length: 160 mm Spindle speed: 5,850 rpm Tool cutting circle: min. 112 mm, max. 210 mm Adjustment: Pneumatic (8 positions—axial and radial) Horizontal Pro...

Condition: used, Tenoning spindle 1 0 Number of milling agregates 2 St. Spindle diameter 40,50 mm Item 1: Okoma UF1 S Angle Combination Unit and Item 2: UF2 EG Rebating Machine, incl. Item 3: Tooling Set for IV78 Timber Windows, IV78 Timber Entrance Doors, and IV78 Timber-Aluminum Windows (Gutmann system) with straight and angled sash profiles For sale on behalf of a customer Psdpfx Afjy T R Tbsgspt ----- Manufacturer's Technical Description: Item 1: Okoma UF 1 S Tenoning and Profiling Machine / Rebating Machine ----- Compact, heavy-duty automatic window machine featuring a cast-iron construction, consisting of: Top-mounted cross-cut saw with 12-position turret stop system; Positive-guided saw guard for accident prevention Tenoning spindle: 40 mm diameter x 252 mm length; 2-step stroke mechanism for 3 tool positions (stroke height: 83 mm); Motor: 7.5 kW Sliding table: Adjustable on both sides from 0 to 60 degrees Automatic feed system with various infinitely variable speed settings; dual pneumatic clamping system; Length stop (LAS) with 3-position system, 2300 mm capacity Automatic transfer unit to the profiling section Profiling spindle: 40 mm diameter x 252 mm length Pneumatic stroke: 112 mm (adjustable) for 2 tool positions Motor: 7.5 kW; Spindle horizontally adjustable relative to the tool cutting edge; Adjustable front milling fence jaw Glazing bead saw with 3 kW motor and 4-position turret head adjustment; Heavy-duty articulated feed system, infinitely variable from 0 to 25 m/min. adjustable, Roller groups pivotable inward and outward Counter-stop with 5-position turret head Frame milling unit ----- Item 2: OKOMA Automatic Rebating Machine, Model UF 2 EG ----- Power Specifications: - Operating voltage: 3-phase, 380 V, 50 Hz - Compressed air: Air requirement: 13 NL/min; Operating pressure: 8 bar Conditioned air: According to Pneurop 6611 1. Profiling Spindle 1: - Spindle arrangement: Right - Power: 11 kW - Speed: 7000 rpm - Direction of rotation: Climb and conventional milling - Spindle diameter: 50 mm - Usable length: 272 mm - Max. tool diameter: 230 mm - Vertical (U-axis) movement of the profiling spindle - Vertical positioning: Actuation: Pneumatic cylinder; 90 mm stroke for 3 tool positions Position sensor: Limit switches - Horizontal positioning: Actuation: Pneumatic cylinder (forward/backward) Position sensor: Limit switches - Automatic plunge mechanism: Plunge speed adjustable to ensure tear-out-free rebating - Safety and dust extraction hood with 140 mm diameter connection port 2. Profiling Spindle 2: - Spindle arrangement: Right - Power: 11 kW - Speed: 7000 rpm - Direction of rotation: Counter-rotation - Spindle diameter: 50 mm - Usable length: 272 mm - Max. tool diameter: 230 mm - U-axis movement of the profiling spindle - Vertical positioning: Drive: Pneumatic cylinder; 90 mm stroke for 3 tool positions Position sensor: Limit switches - Horizontal positioning: Drive: Pneumatic cylinder (forward/backward) Position sensor: Limit switches - Safety and dust extraction hood with connection port (140 mm diameter) 3. Hardware Routing Unit EG: - Spindle arrangement: Right - Drive: 3 kW three-phase motor - Speed: 6000 rpm - Spindle diameter: 30 mm - Usable length: 47 mm - Vertical positioning: None - Horizontal p...

Condition: new, max. workpiece length 3.800 mm profile spindle 1 Stück main drive 15 kW Pedpfxoy T R S Ro Afgspt Control Maestro active windoor

Condition: used, Punching force: 200 kN Ppedpfx Afjrmudgjgjt Thread, for example a 13 mm hole in 12 mm steel Viewfinder via handwheel Assortment of tools is included in the price

Condition: used, Year of construction: 1997, Thread(e) e.g. a 40 mm hole in 20 mm steel Stroke triggering via foot switch Including finder for pegging and setup Podpeizuhpsfx Afgept Assortment of tools is included in the price Punching force: 1000 kN mass: 2400 kg punching force: 1000 kN

Condition: used, functionality: fully functional, Year of construction: 2008, operating hours: 5,850 h, load capacity: 4,000 kg, lifting height: 25,000 mm, fuel type: diesel, mast type: telescopic, construction height: 3,050 mm, fork length: 1,200 mm, empty load weight: 17,200 kg, total length: 6,780 mm, drive type: Diesel, construction width: 2,425 mm, Rotating telescopic forklift Load center: 500 Mast type: Telescopic Transmission: Hydrostatic Ppedoy Tzq Djpfx Afget Speed class: 20 Technical condition: good Front tire type: Pneumatic Front tire condition: 80 - 100% Rear tire type: Pneumatic Rear tire condition: 80 - 100% 3rd valve, full cab

Condition: used, Year of construction: 1966, functionality: limited functionality, Automatic die-cutting machine, Bobst SPO 1575 EEG, ref. 2994 Year – 1966 Maximum sheet size – 1055 x 1575 mm Pedey Hxw Iopfx Afgspt Minimum sheet size – 400 x 600 mm Maximum mechanical speed – 4500 sheets/hour Maximum pressure – 350 t Vacuum feeder Stripping unit Gripper-edge waste removal Batch delivery Sold as is, still in production Available from the end of July 2026 Price: only 12,000 EUR – must be sold as soon as possible.

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2026, punching force: 55 t, throat depth: 500 mm, sheet thickness steel (max.): 20 mm, working height: 1,000 mm, overall weight: 1,200 kg, total length: 1,300 mm, total width: 800 mm, total height: 1,800 mm, power: 5.5 kW (7.48 HP), mount diameter: 40 mm, Punching force 550 kN Max. Punching capacity Ø 40 in 10 mm throat depth 500/750 mm Motor power 5 kW Stroke rate with 20 mm stroke 38 /min Maximum stroke 60 mm Machine weight with throat depth 500: 1150 kg Podpfx Asy T N Uwjfgspt

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2026, Punching force 500 kN Max. Punching capacity Ø 27 in 13 mm throat depth 130 mm Motor power 3.0 kW Stroke rate with 20 mm stroke 25/min Maximum stroke 30 mm Pedsy T N Uqepfx Afgept Weight 295 kg

Condition: new, Year of construction: 2026, functionality: fully functional, ALMI AL-U for zinc spout in pipes with outer diameter from Ø22 to Ø76 mm Ppjdpjy T N S Ajfx Afgst Pipe notch for zinc spout in pipes with outside diameters diameter from Ø22 to Ø76 mm for cutting out vent slots from round and rectangular metal pipes from rectangular metal pipes from 22 mm outer diameter Easy to attach to the wall Wall thickness max. 3 mm steel, 2.5 mm VA, weight 7 kg