Used Rotor For Plastrazor / Kombinator 250S for sale (12,410)

Year of construction: 2022, condition: new, new KAESER compressed air tank 250 liters standing, galvanized 11 bar (with fittings) Year of construction: 2023 Fgjdpfx Akjiqyl Njhof High-quality compressed air tank in galvanized design. Galvanized inside and outside according to DIN EN ISO 1461 in immersion bath. Connecting piece for conical threads. Technical specifications: Volume: 250 liters Overpressure max: 11 bar -Diameter: 500 mm Container height: 1545 mm Mass: 84 kg Connection compressed air inlet: G 3/4 " Connection compressed air outlet: G 3/4 " Connection safety valve: G 3/8 " Connection condensate drain: G 1 1/2 " Container acceptance: RL2014 / 29 / EU Min. Operating temperature: - 10 ° C Max. Operating temperature: + 80 ° C Surface coating: galvanized For new machines comfortable leasing via our house bank possible. Visit our shop. We always have a large selection of new and used compressors in stock!

Year of construction: 2021, operating hours: 2,235 h, condition: used, used screwcompressor immediately available: variable RENNER RSF 250 D - (6 to 8 bar) frequency-controlled, direct-driven screw compressor with RENNERtronic control with REflex control - adjustable pressure range 6 to 8 bar Hours: 2235 h Fgodpfoh Rvpkjx Akhjf Pressure: 6 to 8 bar Nominal output: 250 kW Quantity delivered: at 6 bar: 12.13 to 49.30 m³ / min at 7 bar: 11.80 to 44.50 m³ / min Sound level: 84 dB (A) Compressed air outlet: DN 100 Dimensions length x width x height: 3663 x 2100 x 2338 mm Weight: 5530 kg Year: 2021 Visit our shop. We always have a large selection of new and used compressors in stock! Immediately available.

Condition: new, Year of construction: 2026, We have high-quality load banks from our series production for sale, with the following technical specifications: Condition: NEW Areas of application: - Load testing of emergency generators and uninterruptible power supply (UPS) systems - Grid stabilization through power consumption - Engine test benches Technical features: - Load type: Ohmic resistance - Voltage: 400V, also available up to 800V - Frequency: 50/60 Hz - Power factor: 1 - Power: - 250 kW - 500 kW - 800 kW - 1000 kW - 1500 kW - 2000 kW - Load levels can be set via any key combination - Test report printout - Test automation, automatic start of load levels Operation and control: - Directly via the keypad on the load bank - Via remote box (touch panel) - Via potential-free contacts - Optionally available with Modbus for integration into test automation Further features: - Lockable flaps/doors to prevent dust accumulation during storage - Compact design - Lightweight - Portable - Robust construction with container frame - Forklift slots and crane lifting device Fgjdpfofm T Eusx Akhof Includes electrical wiring diagrams Includes manual Includes software Delivery and commissioning possible for an additional charge.

Year of construction: 2011, condition: used, THERMATOOL CFI 250 Solid State HF Welder 250 kW High frequency tube welding machine This THERMATOOL CFI 250 is a Solid State High Frequency Welder designed for the production of steel tubes and profiles using high-frequency welding technology. With an output power of 250 kW and a 400 kHz welding frequency, it delivers reliable, efficient, and high-quality welding performance for tube mill production lines. Technical Specifications · Manufacturer: THERMATOOL · Model: CFI 250 · Year: 2011 · Output Power: 250 kW · Welding frequency: 400 kHz · Input Voltage: 3 × 400 V · Input Current: 578 A Fjdpfx Akezpx Iijhsgf Main Features · 250 kW MosFet HF inverter with 5 pairs of modules (5 positive & 5 negative) · AUTOMATCH automatic load matching system · 250Kw DC rectifier with PLC control Siemens S7 · Remote control console · Closed-loop distilled water cooling system Looking for a used THERMATOOL HF welder, 250 kW solid-state welder, or other second-hand tube mill equipment? Explore our extensive range of quality used machinery for the steel tube industry. Input Voltage: 3 × 400 V Input Current: 578 A Welding frequency: 400 kHz Output Power: 250 kW 250Kw MosFet HF Inverter with 5 pairs of modules: 5 positive & 5 negative 250Kw DC rectifier: with PLC control Siemens S7

Condition: ready for operation (used), Year of construction: 2008, spindle motor power: 21,000 W, spindle speed (max.): 5,000 rpm, travel distance X-axis: 550 mm, travel distance Y-axis: 180 mm, travel distance Z-axis: 1,185 mm, total height: 3,040 mm, total width: 4,100 mm, overall weight: 15,000 kg, controller manufacturer: HEIDENHAIN, controller model: Plus IT 3D CNC Pilot 4290 plus it, product length (max.): 7,800 mm, number of axes: 7, This 7-axis DMG GILDEMEISTER GMX 250S Linear was manufactured in 2008. A turn-mill centre featuring the advanced Heidenhain Plus IT 3D CNC Pilot 4290 control unit, it represents the pinnacle of turning and milling capabilities. Contact us for more information. - Guide Way Type: Roller guide ways- Main Spindle: - Drive Power (100% ED): 21 kW - Drive Power (40% ED): 28 kW - Spindle Speed Range (100% ED): 5000 rpm - Spindle Speed Range (40% ED): 5000 rpm - Base Speed: 850 rpm - Torque max. (40/100% ED): 240 / 320 Nm - Drive Type: AC/1, Integrated Spindle Motor 76 - C-Axis Speed: 5000 rpm - C-Axis Torque: 320 Nm - C-Axis Resolution: 0.001 deg - Chuck Diameter: 200 - 315 mm - Bar Capacity max.: 65 mm - Spindle Flange: Flachflansch 170 h5 - Spindle Bore Diameter: 80 mm - Clamping Cylinder Bore Diameter: 67 mm - Diameter in Front Bearing: 120 mm- Tool Spindle / Milling Spindle: - Tool Holder: HSK63-A - Spindle Speed max.: 12000 rpm - Drive Power (100% / 40% ED): 13.2 / 22 kW - Torque (100% / 40% ED): 60 / 100 Nm- Spindle 2 (Counter Spindle - option): - Drive Power (100% / 40% ED): 21 / 28 kW - Speed max.: 5000 rpm - Chuck Diameter: 315 mm - Bar Capacity max.: 65 mm- Working Range / Turning Diameter: - Swing diameter max.: 640 mm - Turning diameter max.: 520 mm - Turning diameter over counter spindle max.: 400 mm - Turning diameter over counter spindle & turret max.: 250 mm - Turning diameter over tailstock max.: 400 mm - Spindle distance: 1500 mm - Turning length (short / long): 1175 mm - Workpiece weight chuck parts (flange weight) max.: 150 (100) kg - Workpiece center of gravity from spindle flange max.: 200 mm - Workpiece weight shaft parts with tailstock max.: 800 kg- Slide Travel: - Slide 1 (top): X1 = 550 mm, Y1 = 180 mm, Z1 (short/long) = 1185 mm, B1 = 240 deg - Slide 2 (option): X2 = 180 mm, Z2 (short/long) = 1050 mm - Slide 3 (counter spindle): Z3 (short/long) = 1150 mm- B-Axis: - Swivel speed max.: 30 rpm - Torque B-Axis (S6-40%/max.): 2860 / 5720 Nm - Resolution B-Axis: 0.001 deg - Clamping hydraulic (at 30 bar): 2000 Nm- Tool Magazine: - Number of tool pockets: 36 - Tool weight max.: 8 kg - Tool length max.: 400 / Ø80 mm - Tool length max. with free space: 250 / Ø125 mm - Tool diameter standard: Ø80 mm - Tool length max. without free space: 230 / Ø80 mm - Turning tool f-dimension standard: 40 mm - Turning tool f-dimension with free space max.: 62.5 mm - Tilting moment tool standard max.: 60 (100) kg/cm - Lifting movement: 85 mm- Turret 2 (Option): - Driven Tools Equipped: Yes - Number of tool stations: 12 - Shaft diameter acc. to DIN 69880: 40 mm - Number of driven tools: 12 - Drive power (max. 100% ED): 10.7 kW - Torque (max. 100% ED): 32 Nm - Speed range: 4000 rpm - Indexing time (30/180 deg.): 0.34 / 0.64 s - Tool load max.: 100 kg - Permissible imbalance due to tool loading: 63 Nm- Feed Drives & Rapid Traverse (Schlitten 1, 2, 3): - Rapid traverse X/Ys/Z (Slide 1): 40 / 24 / 70 m/min - Feed force X/Ys/Z (Slide 1, S6-40%): 7 / 11 / 7.5 kN - Travel resolution X/Ys/Z (Slide 1): 0.001 mm - Ball screw X (Slide 1): Ø32 x 20 mm - Ball screw Ys (Slide 1): Ø40 x 15 mm - Linear motor Z1-Axis: 1FN3600-4WB00 - Rapid traverse X/Z (Slide 2): 24 / 36 m/min - Feed force X/Z (Slide 2, S6-40%): 9 / 11 kN - Rapid traverse Z (Slide 3): 36 m/min - Feed force Z (Slide 3, S6-40%): 13 kN- Coolant & Chip Conveyor: - Coolant capacity: 370 l - Drive power: 0. Fgodpfxjyfv Rbo Akhsf

Condition: excellent (used), Year of construction: 2004, Arburg 270 S 250-60 (2004) Clamping Force: 25 t Tie Bar Spacing: 270 mm × 270 mm Platen Dimensions: 400 mm × 400 mm Max. Mold Opening Stroke: 275 mm Min. Mold Height: 198 mm Max. Daylight: 279 mm Ejector Stroke: 95 mm Fjdjxl Tp Tjpfx Akhsgf Mold Opening Force (Max.): 14 kN Machine Dimensions (W × D): 1250 mm × 3800 mm Machine Weight: Approximately 1900 kg Screw Diameter: 22 mm Stroke Volume: 39 cm³ Injection Pressure: 1810 bar Injection Flow (2 Pumps): Up to 8.1 cm³/s Material Throughput (PS): Up to 22.0 kg/h Year of Manufacture: 2004 Type: Hydraulic Injection Molding Machine

Condition: good (used), Year of construction: 2000, Arburg 420 C 1000-250 (2000) Clamping force : 100 t Screw diameter : 30 mm Distance between tie bars : 420 x 420 Shot weight : 100 g Max mold hight : 200 m Max opening : 730 g Hydraulic cores : 0 Fgjdpfx Asxqcrzjkhef \+ robot TECHNOMATIC

Condition: good (used), Year of construction: 2006, Controll: NC4 Fgsdpjrgw Exjfx Akhjf Clamping force: 250 tons Distance between tie bars: 630 x 630 mm Mold height: 330 x 830 mm Opening stroke: 675 mm Dylight max: 1505 mm Screw diameter: 50 mm Shot volume: 530 cm3 Shot weight: 482 g Injection pressure: 2426 bar Cores- 2 Hot runners- 12 + Robot Demag ergotech W733-0174 Year of manufacture: 2006 Handling capacity: 10 kg Number of axes: 3 Max range: 1000 mm X- 900 mm Y-1400 mm Z- 2500 mm

Condition: like new (used), Year of construction: 2018, Clamping force: 25 ton Version: Shuttle table Opening force/stroke min.- max. : 100/225 mm Mould height variable min.- max. : 122-222 mm Shuttle table stroke: 500 mm Wight on shuttle table. max. :120 kg Ejector force/stroke max. : 16/40 kN/mm Screw: 22 mm Effective screw length L/D : 20 Screw stroke max. : 90 mm Stroke volume: 34 cm3 Shot weight: 31 g Injection pressure: 2.000 bar Working hours: 15.571 h Fjdpeyfg D Sofx Akhegf

Condition: excellent (used), Year of construction: 1999, Clamping force: 25 tons Distance between tie bars: 270x270 mm Opening max: 275mm Min Mould height: 200 mm Fgjdpjvl Skgsfx Akhsf Mold platens size: 400 x 400 mm Screw diameter: 18 mm Injection volume: 20 cm3 Shot weight: 17 g Injection pressure: 2500 bar Working hours: 38.035 h

Condition: like new (used), Year of construction: 2020, Clamping force: 25 ton Version: Shuttle table Opening force/stroke min.- max. : 100/225 mm Fedpfxsvl Skaj Akhjgf Mould height variable min.- max. : 122-222 mm Shuttle table stroke: 500 mm Wight on shuttle table. max. :120 kg Ejector force/stroke max. : 16/40 kN/mm Screw: 22 mm Effective screw length L/D : 20 Screw stroke max. : 90 mm Stroke volume: 34 cm3 Shot weight: 31 g Injection pressure: 2000 bar Working hours: 7397 h

Year of construction: 2025, condition: new, The rotor mills RM 250 is ideally suited for the milling of soft & medium-hard samples like chemicals, charcoal, limestone, ceramic (porous), coal, chalk, sulfur, citric acid, sugar, titanium chips, glas, tire wire and many more! Max. feed size* Fgedpef Ulibsfx Akhsf

Condition: excellent (used), functionality: fully functional, grinding width: 1,350 mm, overall weight: 4,200 kg, Fine and smoothing sanding machine Heesemann, model: FGA 6 For intermediate lacquer sanding, wood surface smoothing, and sanding of foils The machine is fully functional, well maintained, and in very good technical condition. The conveyor belt has been replaced. Sanding width: 1300 mm Working height: 880 mm, constant Maximum workpiece thickness: 3–80 mm Transport bed: with individual transport belts Drive: 2.5 kW three-phase motor, including blow-off unit Feed speed: 4.5–22 m/min, adjustable Units Brush roller unit: centrally height-adjustable Diameter: 150 mm Drive power: 1.5 kW Bristle material: Fibre Longitudinal sanding unit Continuous electronic adjustment of the sanding belt speed via frequency inverter Wear-free brake unit Pneumatic belt tensioning Intermittent belt blow-off device Infrared belt control Counter-rotating sanding belt Sanding belt dimensions: 2620 x 1350 mm Belt sanding speed: 0.3–12 m/s Drive power: 11 kW Graphical operator terminal for inputting machine settings, including numeric thickness adjustment and displays for fault sources, workpiece throughput, and feed speed Electronically controlled pressure beam Control roller spacing: 40 mm Pneumatic belt tensioning Fodpfxjya I Iue Akhjgf The pressure beam's contact surfaces automatically adjust to the shape of the passing workpieces Workpiece vacuum hold-down system: Fan with 5.5 kW drive power Operator side and terminal: left Operating voltage: 400 V, 50 Hz Space requirements: 2550 x 2220 x 2300 mm Weight approx.: 4200 kg (Technical specifications are subject to change and errors, as well as prior sale.)

Condition: ready for operation (used), Year of construction: 2021, operating hours: 9,500 h, clamping force: 1,000 kN, overall weight: 5,290 kg, This 5-axis SUMITOMO SHI DEMAG IntElect2 100/470-250 was manufactured in 2021. It features a clamping force of 1000 kN and a tie bar distance of 470 mm. The machine includes an injection unit size of 250 and a screw diameter of 30 mm. If you are looking to get high-quality injection moulding capabilities, consider the SUMITOMO SHI DEMAG IntElect2 100/470-250 electrical injection moulding machine we have for sale. Contact us for further details. - Tie Bar Distance: 470 mm- Mould Height Min.: 180 mm- Mould Height Max.: 550 mm- Centering Diameter (Fixed Platen): 125 mm- Centering Diameter (Moving Platen): 125 mm- Ejector Stroke: 150 mm- Ejector Force: 32 kN- Ejector Speed: 333 mm/s- Injection Unit Size: 250- Screw Diameter: 30 mm- L/D Ratio: 20- Injection Speed: 350 mm/s- Control Unit: SDIAS- Mains Connection / Voltage: 400 V / 50 Hz- Current / Amperage: 70 A- Short Circuit Capacity (Icw): 2.0 kA- Max. Hydraulic Pressure (Pmax): 210 bar- Total Weight: 5290 kg- Robot System Model: SDR 5S H&P- Robot Load Capacity: 3 kg- Robot X-Stroke (Transverse Stroke): 1000 mm (Non-operator side)- Robot Y-Stroke (Demoulding Stroke): 400 mm- Robot Z-Stroke (Vertical Stroke): 1000 mm- Additional / Peripheral Equipment:- Material Hopper Loader / Conveyor: KOCH TECHNIK- Temperature Control Unit: HB-THERM Thermo-5 Fgodezp Ew Dspfx Akhsf

Condition: ready for operation (used), Year of construction: 2015, spindle speed (max.): 4,500 rpm, travel distance X-axis: 230 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 575 mm, spindle motor power: 26,000 W, overall weight: 5,700 kg, number of axes: 4, This 4-axis Mazak QTN 250 II MSY was manufactured in 2015. It features a maximum swing diameter of 640 mm and a maximum machining diameter of 380 mm. The machine includes a main spindle with a chuck diameter of 250 mm and a counter spindle with a chuck diameter of 210 mm. If you are looking to get high-quality turning capabilities, consider the Mazak QTN 250 II MSY horizontal turning machine we have for sale. Contact us for further details. -Information • • CNC control: MAZATROL MATRIX NEXUS 2 / MATRIX II • Working capacity: • Maximum swing diameter: 640 mm • Maximum machining diameter: 380 mm • Maximum machining length: 500 mm • Bar capacity: 77 mm Fedpfszpypuex Akhogf • Axis travel: • C-axis rapid movement: 550 (as stated) • Tailstock travel: 500 mm (as stated) • Main spindle: • Chuck diameter: 250 mm • Nose: ASA 8 • Counter spindle: • Chuck diameter: 210 mm • Maximum speed: 5,000 rpm • Nose: ASA 5 • Driven tools: • Maximum speed: 5,000 rpm • Feed rates: • X-axis rapid traverse: 36,000 mm/min • Z-axis rapid traverse: 36,000 mm/min • Coolant tank capacity: 300 litres Additional equipment • Automatic loading and unloading system by MECCANO • FANUC ARC Mate 100iC/12 robot (per photos) • Tooling package as shown in the photographs and video • Assorted tool holders as shown in the photographs Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: excellent (used), color: other, Year of construction: 2005, Last haak Rotator Snelwisselsysteem Fedpfx Aksymqmtehjgf = More information = Dimensions (LxW): 104 x 48 cm Technical condition: very good Visual appearance: very good = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: excellent (used), Year of construction: 1970, functionality: fully functional, MULLER MARTINI PERFECT LINE MACHINE LOT INCLUDES: PERFECT BINDER ROTORBINDER 10 CLAMPS (with extra stop system) GATHERING MACHINE WITH 12 STATIONS, MODELS 201 AND 2 (manual) Fgsdszdyx Sspfx Akhsf TRANSFER SYSTEM TO ROTORBINDER THREE-KNIFE TRIMMER 3670, AUTOMATIC, WITH CASSETTE THE PRICE INCLUDES DISMANTLING AND LOADING ONTO A TRUCK OR CONTAINER.

Condition: used, This listing is for a Thermo Scientific 75005701 Centrifuge Rotor. The unit is in full working condition and is ready for immediate release. Fgsdoxxyxbopfx Akhef Thermo Scientific 75005701 Centrifuge Rotor The 75005701 Centrifuge Rotor is a high-capacity swinging bucket rotor engineered for use with Thermo Scientific Sorvall ST8 and Heraeus Megafuge 8 centrifuges, designed for efficient and safe sample processing. Key Features: Capacity: Holds 4 round buckets, allowing for versatile sample volumes and formats, ideal for various laboratory applications. Swinging Bucket Design: This design promotes efficient sample processing, enabling the rotor to tilt during centrifugation for effective separation and easier loading/unloading. ClickSeal Biocontainment Lids: These lids ensure secure, one-handed operation, minimizing contamination risks and enhancing user safety during sample handling. Adaptors for Blood Collection Tubes: Specifically designed adapters accommodate 5/7mL and 10mL blood collection tubes, making it suitable for clinical and research applications involving blood samples. Compatibility: Tailored for use with Thermo Scientific Sorvall ST8 and Heraeus Megafuge 8 centrifuges, ensuring seamless integration into laboratory workflows. Specifications: Type: Swinging bucket rotor Capacity: 4 round buckets Adaptors: Available for blood collection tubes (5/7mL and 10mL) Compatibility: Thermo Scientific Sorvall ST8, Heraeus Megafuge 8 centrifuges

Condition: used, Hydraulic power unit PLESSEY TUROLLA / HAWKER ELECTRIC Hydraulic unit, hydro power unit Type: TFP 8.5 D 113 Year of manufacture: approx. 1985 Operating pressure: 250 bar Flow rate: 11 liters/min. Tank capacity: approx. 16 liters Motor power: 4 kW Mains connection: 400 volts, 50 Hz - Hydraulic pump PLESSEY TUROLLA, Type TFP 8.5 D 113 - 1 piece HAWE solenoid valve, Type HSV 2R2 (lifting/lowering valve) Fodpfx Aezpbqyjkhogf - Hydraulic power unit in horizontal design with low height, e.g. for lifting tables Space requirement L x W x H: 700 x 400 x 240 mm Weight: 55 kg (without oil filling) Good condition

Condition: excellent (used), Year of construction: 2008, I sell the press for glulam glued massive wood MAWEG ROTOR 6000. Material size 6000 X 900 x 200mm 4 working areas, automatic rotation. 12 pcs hydraulic cross pressures per 1 area 12 pcs hydraulic surface pressures per 1 area Self weight 7000kg. Fsdpfezraalox Akhegf Very good condition. Available immediately.

Condition: excellent (used), functionality: fully functional, total length: 1,205 mm, total width: 1,000 mm, total height: 1,890 mm, REF: MM6147 30 x Stainless-steel hanging racks for curing meat, previously used for hanging chorizo. These racks can be stacked one on top of each other. Fodpfx Akox Tg Axshogf Overall dimensions - 1205mm long x 1000mm wide x 1890mm high. 

Condition: used, Cryogenic gas tank semi-trailer CRYOBASE used for liquid oxygen, nitrogen and argon Capacity: 24 m³ Date of first registration: 29.09.2025 Pump, flow meter, vaporizer, vacuum insulation. New technical inspection (HU), vacuum and leak test. Fjdpfxoznb Nyo Akhjgf We also have other tankers for LIN, LOX, LAR, LNG and CO2, argon, oxygen, nitrogen and carbon dioxide, LNG, Hydrogen, Methane. We will be glad to answer your questions via Phone and E-mail

Condition: used, Hazemag Universa 2030 rotor shredder with fixed shredding knives, designed for coarse shredding of wood and other materials. The machine is equipped with a hydraulically adjustable grate system for controlling the output material size. Technical specifications: Manufacturer: Hazemag Model: Universa 2030 Rotor length: 3000 mm Rotor diameter: 2000 mm Rotor weight: approx. 25 t Fjdpfx Akjzpxfuehogf Rotor speed: 480 rpm Drive motor: 500 kW Electric motor and starter included Hydraulically adjustable grate system Output size adjustable from 100 to 400 mm (10–40 cm) Total machine weight: approx. 100 t Approximately 1,000 operating hours

Condition: used, functionality: fully functional, machine/vehicle number: T102L00334, This listing is for a second-hand ‘Plockmatic PBM350-m’ finishing machine Item for sale: 1 x Plockmatic PBM350-m incl. front trimmer incl. SquareFold Condition: This listing is for a second-hand machine, which may show signs of wear Fgsdpfezmqa Sox Akhof (minor scratches or discolouration). The machine has been tested to ensure it is in working order Packaging and dispatch: You are welcome to view the machine during our business hours. Please arrange an appointment to do so! Seaworthy packaging and worldwide dispatch available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, please feel free to contact us directly.

Condition: like new (used), functionality: fully functional, In this listing, you are purchasing a second-hand finishing machine, the “SDD SFM7714 Square Fold Module” Item for sale: 1 x SDD SFM7714 Square Fold Module Condition: This listing is for a new unit in its original box Packaging and dispatch: You are welcome to view the unit during our opening hours. Please arrange an appointment to do so! Fgodszmp Uzopfx Akhjf Seaworthy packaging and worldwide dispatch available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, you are of course welcome to contact us directly.