Used Rung Milling Machine for sale (73,990)

Condition: good (used), Year of construction: 1995, functionality: fully functional, Control system: Heidenhain iTNC 530 Operating hours: 54631 h X-axis 3500 mm Y-axis 1000 mm Nlodpozufi Rjfx Ab Rsh Z-axis 900 mm Drive power 30 kW Speed range 20–3800 rpm Rapid traverse 15 m/min Feed rate 4 m/min Clamping surface 2x 1600 x 960 mm Max. table load 2 x 4000 kg Machine weight (approx.) 21 t Machine dimensions (WxDxH) 10770 x 4100 x 3150 mm Technical data / Accessories Universal bed-type milling and boring machine Milling head position: Vertical, horizontal (top, center, left, right) Heidenhain TS 120 3D touch probe Kekeisen TW 32 drum-type tool changer Knoll hinged-belt chip conveyor

Condition: used, Year of construction: 1977, Technical details: x-travel: 1050 mm y-travel: 500 mm z-travel: 500 mm spindle taper ISO: SK40 spindle head swivable left - right: 90 ° quill travel: 180 mm range of revolution per miute: 36 - / 18 step U/min feed:: X+Z: mm/min feed:: Y: - 900 mm/min. rapid traverse : X/Z: / Y: 900 mm/min table surface area: 1200 x 550 mm total power requirement: ca. 10 kW machine weight approx.: 4400 kg dimension machine xH: 3,1 x 2,5 x 2,2 m Nlodpfou Ndd Rsx Ab Rsh Console design with tilting, tilting and swiveling table, as well as adjustable vertical milling head. Machine with 3-axis digital readout (with resolution 0.01mm) with feed and individual drive of all three axes stepless feed X-axis: Support lengthwise = 700mm; univ. milling table lengthwise 350mm = total lengthwise: 1050mm Accessories: Comparable with the pictures *

Condition: good (used), I am selling this machine, equipped, already disconnected, stored in stock. Video of the machine can be sent. max. wheel diameter 710 mm max. module 10 Nledpfx Abetuipms Rjh Spindle speed : 700-2800 1/ min. Machine weight : 13,500 kg

Condition: like new (used), Kunzmann WF 7/3 Tool milling machine Kunzmann WF7/3 with Heidenhain TNC 124 control, manufactured in 1997, in good CONDITION. CE compliant!! The machine comes from the vocational school of the HWK Augsburg and, according to the master craftsman, has approximately 300 operating hours. Technical data: Njdpfx Abezy Uh Tj Relh Year of manufacture: 1997 Fixed angular table Clamping slots: 6 Slot width: 14 H 7 Slot spacing: 63 mm Maximum load: 300 kg Spindle speeds S I: 1 – 1125 min-1 Spindle speeds S II: 1126 – 4500 min-1 Feed rate (potentiometer 100%): longitudinal and transverse 0 – 2000 mm/min. Rapid traverse: longitudinal and transverse 5000 mm/min. Feed rate: vertical 0 – 2000 mm/min. Rapid traverse: vertical 4000 mm/min. Travel distances X/Y/Z: 600/400/400 mm Vertical and horizontal quill - SK40 Hydraulic clamping system Weight: approx. 2000 kg Dimensions: approx. 2 x 2 x 2 m Main drive motor: 7.5 kW Accessories and equipment: Heidenhain TNC 124 control Hydraulic chuck, vertical and horizontal Automatic central lubrication Spindle brake Technical documentation, spare parts diagrams, operating manual for the control unit and programming examples Handwheels Coolant system About the machine: Offered is a tool milling machine Kunzmann WF7/3 with a Heidenhain TNC 124 control. This universal milling machine is in very good original condition. It comes from a company where it was only used for training purposes. It has a very easy-to-use control system. Furthermore, the machine has hydraulic clamping both vertically and horizontally. Switching from vertical to horizontal is very easy by folding down the vertical head. The guides are regularly lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically inspected by us. Take advantage of the opportunity to inspect and test the Kunzmann on-site under power. You can find more milling machines from well-known manufacturers on our website.

Condition: used, Year of construction: 1990, TECHNICAL DETAILS Nlsdpfx Ajz S Namob Reh Travel ranges X-axis travel: 500 mm Y-axis travel: 400 mm Z-axis travel: 400 mm Work table Table size: 680 × 380 mm Control system CNC control: Philips 432 Feed rate and rapid traverse Feed rate range: 1–3,000 mm/min Rapid traverse: 6 m/min Spindle and tool holder Tool holder: ISO 40 Speed range: 20–3,150 rpm Main drive: 5 kW Milling head Swivel range of milling head: ±90° Performance data Total power requirement: 12 kW Machine weight: approx. 1.2 t Dimensions Space requirement: approx. 2.5 × 2 × 2 m EQUIPMENT Swiveling milling head Philips 432 CNC control

Condition: good (used), functionality: fully functional, Mikron WF 32 CH with Heidenhain TNC 355 Nsde Afacqjpfx Ab Relh

Condition: good (used), Year of construction: 2006, functionality: fully functional, Overhauled: 2014 Control system: Heidenhain iTNC 530 Table: 10,000 x 3,000 mm X-axis travel: 10,000 mm Y-axis travel: 4,200 mm Z-axis travel: 1,100 mm Distance between columns: 3,500 mm Distance between table and spindle (without head): 2,000 mm Distance between table and 45° head: 1,298 mm Table load capacity: max. 30,000 kg Nedpfx Aj Adn Rgjb Rslh Rapid traverse rate: 10 m/min Feed rates: 6 m/min Spindle speed: 3,000 RPM Spindle power: 40 kW 3 heads: 1. Vertical, integrated, 2. Universal orthogonal head 1°, 3. Universal twist head

Condition: ready for operation (used), Year of construction: 1990, Available immediately from university surplus: Vertical milling machine LAGUN Type FVA 3 LA Year of manufacture 1990 Table 1600 x 400 mm Travel X/Y/Z 1600/360/420 mm Nodpfxj Aa Ilco Ab Rjlh Spindle taper SK 50 Automatic quill feed 127 mm Spindle speeds 28 – 1400 rpm Drive power 12.5 hp Weight 4.5 tons Numerous accessories included: collets, milling cutters, hydraulic vise Price: Euro 1,500.00 plus VAT, ex works

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Njdpfx Aj Ad Iu Seb Relh Loading: December 1st to December 10th. TECHNICAL DETAILS SPINDLE Speed range: 32–1,600 min⁻¹ WORK TABLE Table dimensions: 1,050 × 620 mm Table slots: 8 TRAVEL Travel in X-axis: approx. 600 mm Travel in Y-axis: 500 mm Travel in Z-axis: 400 mm MACHINE DETAILS Manufacturer: Maho Type: MH 800 Machine number: 38,933 Machine dimensions (L × W × H): 2,000 × 1,500 × 1,800 mm Weight: 1,000 kg EQUIPMENT 3-axis digital display

Condition: used, Dimensions (LxBxH): 120 x 100 x 160 cm - Number of axes [pcs]: 3 - X-axis travel [mm]: 550 - Y-axis travel [mm]: 200 - Z-axis travel [mm]: 500 - Table length [mm]: 1000 - Table width [mm]: 250 - Tool holder: ISO40 - Min. spindle speed [rpm]: 44 - Max. spindle speed [rpm]: 2000 - Transport dimensions: 1200mm x 1000mm x 1600mm (l x w x h) Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Nodpfx Abszrx Rco Relh Lukas van Rossum

Condition: good (used), Year of construction: 2001, The machine will be delivered including a new replacement spindle. Digma HSC 500, year of manufacture 2001, Heidenhain iTNC 530 control, travel X/Y/Z 500/400/350 mm, spindle speed up to 42,000 rpm, tool holder HSK 40, laser diameter measurement, oil mist lubrication system, extraction for graphite machining, Nedpjy A H Tpsfx Ab Relh 3D infrared measuring probe, The tool cannot be released from the spindle; according to the service technician, this is not a spindle problem but a hydraulic issue. A new HSC replacement spindle is included.

Condition: used, Year of construction: 1967, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS General Information Machine type: Universal tool and cutter grinding machine Machine weight: approx. 3.1 t Travel distances X-axis travel: 1,100 mm Y-axis travel: 700 mm Z-axis travel: 500 mm Spindle and milling head Distance spindle/table: 9–509 mm Swivel range of spindle head: 360° Spindle mount: SK 40 Spindle speed: 30–2,066 rpm Speed stages: 27 Milling head: original Huron adjustable milling head, adjustable in 3 dimensions Horizontal milling: possible Feed and rapid traverse Feed rate: 1.6–820 mm/min Feed stages: 27 Rapid traverse X-axis: 2.8 m/min Rapid traverse Y-axis: 2.8 m/min Rapid traverse Z-axis: 1.4 m/min Nods Aa Au Sspfx Ab Rolh Work table Clamping surface: 1,435 × 460 mm Performance data Total power requirement: 10 hp Dimensions Width: approx. 2.36 m Height: approx. 1.65 m Depth: approx. 1.45 m EQUIPMENT Original Huron adjustable milling head Handwheels for X, Y, and Z axes Feeds for X, Y, and Z axes Safety machine main switch Adjustable work light Coolant system Heidenhain digital display

Condition: used, Year of construction: 2018, travel -x axis 1.300 mm Nljdpfj Adfluox Ab Rjh travel -y axis 670 mm travel -z axis 625 mm control HEIDENHAIN - TNC 620 number of spindle speeds 12.000 U/min tool taper SK 40 table dimension (L x W) 1.500 x 670 mm numbers of positions in the tool changer 30 Milling machining centers - vertical | DOOSAN - DNM 6700 equipped with 30-way tool changer, ITC cooling system and chip conveyor. The machine only has 13.600 spindle hours. The machine is in well-maintained condition, has been used exclusively for machining aluminium and plastics, and is available for inspection under power at any time. The machine video from the production plant will be shared on request. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DNM5700 | DNM-5700

Condition: excellent (used), Year of construction: 1998, Hermle UWF 802 M Hermle UWF 802 M with Heidenhain TNC 124 NC control, cycle-controlled, year of manufacture 1998, in very good original condition. The machine comes from the training workshop of a renowned German mechanical engineering company. Technical data: Travel distances X: 500 mm, Y: 430 mm, Z: 400 mm Table size 800 x 390 mm Spindle connection ISO 40 Spindle speed 71 to 3550 rpm, 18 steps Feed rate X and Y 2 to 1600 mm/min, stepless Feed rate Z 2 to 1000 mm/min, stepless Rapid traverse X and Y 1.6 m/min Rapid traverse Z 1 m/min Spindle drive 3 kW Mains connection 400 volts, 50 Hz - Spindle speed via 18 gear stages - Vertical milling head, swiveling to the right and left - Hydro-mechanical tool clamping, vertical and horizontal Nljdpfx Abjzbrz Is Rsh - Automatic central lubrication - Coolant system located next to the machine - Control cabinet fixed to the machine - Fixed angle table - Operating manual and wiring diagram Space requirement L x W x H 2000 x 1800 x 1950 mm Weight approx. 1750 kg Accessories and equipment: Operating manual, electrical diagrams Machine feet About the machine: We offer a Hermle UWF 802 M milling machine with Heidenhain TNC 124 NC control, cycle-controlled, year of manufacture 1998, in very good condition. The machine is fully functional, of course. All slides move very smoothly and evenly. Even at high speeds, the Hermle runs very quietly. This newer generation of milling machines is very user-friendly. Take advantage of the opportunity to inspect this machine on-site while it is powered up and see for yourself what condition it is in.

Condition: used, Year of construction: 1987, x-travel 500 mm y-travel 430 mm z-travel 400 mm Control HEIDENHAIN, TNC 114 B table surface area 800 x 390 mm spindle taper SK 40 spindle turning speed range 50 - 2500 U/min spindle drive 3 kW max. torque on the spindle 5 Nm feeds X-axis 4 - 1600 mm/min feeds Y-axis 4 - 1600 mm/min feeds Z-axis 4 - 1000 mm/min rapid traverse X/Y/Z axis 1,6 / 1,6 / 1,0 m/min power feed x/y/z 5000 N table load capacity max. 250 kg total power requirement 6 kW weight of the machine ca. 1,6 t dimensions of machine L x W x H 2,30 x 2,30 x 2,40 m Accessories: vertical head with hydr. tool clamping and quill retraction, solid table, various tool fixtures, coolant Nedpfxs Adakfj Ab Rslh

Condition: ready for operation (used), Year of construction: 1984, Immediately available from training center: MAHO Tool Milling Machine Model MH 600 Year of manufacture: 1984 Table: 700 x 400 mm Travel X/Y/Z: 500/400/400 mm Speeds: 40 – 2500 rpm SK 40 Spindle stroke: 80 mm Coolant system Drive: 4 kW Feeds: 8 – 400 mm/rev Head swivels 90/90 degrees Weight: 1900 kg Nlodo Aa Il Ajpfx Ab Roh Price: EUR 2,250.-- plus VAT, ex location.

Condition: ready for operation (used), travel distance X-axis: 1,500 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 550 mm, spindle speed (max.): 2,066 rpm, spindle speed (min.): 30 rpm, Huron MU6 Universal Milling Machine Model: MU6 Table Size: 2000 x 460mm Njdpjz S Nkrofx Ab Rolh ‘X’ Longitudinal Travel: 1500mm ‘Y’ Cross Travel: 700mm ‘Z’ Vertical Travel: 550mm Spindle Speeds: 30 – 2066 RPM Spindle Taper: 50 INT Machine with: Digital Readout

Condition: good (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 2507, Used CNC bed milling machine / traveling column milling machine with automatic tool changer and swivel head. Manufacturer: TIGER S.p.A. (Italy) Type: TFA 5 RT Year of manufacture: 2002 Serial number: 2507 The "RT" designation at Tiger indicates a version with a rotary table or 5-axis machining capability. Heidenhain CNC control (probably TNC 426 or TNC 430) Nljdpfxezffnus Ab Rsh Automatic tool changer Tool magazine Tiger TFA 5 RT ISO 50 tool holder Swivel milling head Bed-type machine with a large working area Full enclosure Tool changer Weight 650 kg Connection 400 V / 50 Hz Power output 45 kW Maximum current 80 A Technical data X-axis travel 2,500 mm Y-axis travel 1,200 mm Z-axis travel 1,200 mm Table size 1,000 x 1000 mm Tool holder ISO 50 Spindle speed 2,500 rpm Main drive 45 kW Number of tool positions 60 Machine weight 12,000 kg

Condition: as good as new (ex-display), functionality: fully functional, travel distance X-axis: 2,050 mm, travel distance Y-axis: 3,010 mm, travel distance Z-axis: 290 mm, warranty duration: 24 months, Top-of-the-line CNC portal milling machine as a demonstration system. Particularly suitable for processing non-ferrous metals, plastics, wood, and composite materials. vhf machines have been manufactured in Germany for over 35 years and are characterized by their ease of operation and high reliability. A professional service team ensures prompt support. Features: - Large vacuum table with a clamping area of 2,000 x 2,500 mm - T-slot clamping area at the front of 2,000 mm x 500 mm - Water-cooled spindle (40,000 rpm, S1 = 2.3 kW) - Automatic tool changer for 4 tools - Dust and chip extraction system including vacuum cleaner - Electrically controlled minimum quantity lubrication system - System cabinet for manufacturing computer and control components Price approximately 30% below the new price of the machine Njdoz Sy A Sopfx Ab Rolh plus delivery, installation, and software Complete equipment and options available upon request.

Condition: excellent (used), Year of construction: 2015, Description to follow! Nlsde Afzr Tspfx Ab Roh

Condition: good (used), Universal tool milling machine Mikron WF 2 Manufacturer: Mikron Type: WF 2 Machine category: Universal tool milling machine Spindle speeds: 12 Speed range: 50–2240 rpm Spindle speed step: 1.4 Feeds: 18 Feed range: 8–400 mm/min Feed step: 1.25 Rapid traverse rate: 1400 mm/min Milling spindle motor: 2-speed, 1.2/1.8 kW at 1400/2800 rpm Feed motor: 0.55 kW at 1400 rpm Coolant pump motor: 0.1 kW at 2800 rpm Longitudinal travel X: 420 mm Transverse travel Y: 250 mm Vertical travel Z: 335 mm automatic / 340 mm manual Vertical travel with optical measuring system: 300 mm automatic / 310 mm manual Clamping surface of fixed angle table: 250 × 700 mm Machine weight with vertical milling head and angle table: approx. 770 kg Weight with all accessories: approx. 1250 kg Nlsdpfx Aszw U Nfob Rjh Position indicator: digital for X/Y/Z Machine vice: included Tool holders and collets: extensive range of accessories available Operating manual: included No guarantee is given for the accuracy, completeness, or up-to-dateness of the information provided.

Condition: not inspected (used), travel distance X-axis: 400 mm, travel distance Y-axis: 315 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 3,150 rpm, Universal Tool Room Milling Machine Manufacturer: DECKEL Model: FP3NC Control System: Dialog 4 Technical Specifications: - X-axis travel: 400 mm - Y-axis travel: 315 mm Nlodpfozz S Rnsx Ab Roh - Z-axis travel: 400 mm - Spindle speed: 3,150 rpm Condition: used, untested In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and work-holding devices shown are included in the scope of delivery only if specified in the additional information. Subject to technical changes, errors, and prior sale.

Condition: used, Year of construction: 2016, x-travel 1020 mm y-travel 700 mm z-travel 500 mm Nledpfx Abe Aaq T Aj Rjh control Heidenhain iTNC530

Condition: excellent (used), functionality: fully functional, 1x Universal milling machine Deckel FP4 NC Dialog 3 1x Universal milling machine Deckel FP4 NC Dialog 4 Manufacturer: Deckel Type: FP4 Condition: used, good ----- Travel ranges: X-axis: approx. 500 mm Y-axis: approx. 400 mm Z-axis: approx. 400 mm Table clamping surface: approx. 700 x 400 mm Speed range: approx. 50 – 2500 rpm Tool holder: ISO 40 ----- Tool clamping: hydraulic Nodpfx As Acd Tbob Relh Drive power: approx. 6.0 kW Feeds and rapid traverses: in all 3 axes Feed range: approx. 8 – 630 mm/min Rapid traverses: approx. 3.0 m/min ----- L x W x H: approx. 2300 x 1800 x 1800 mm Weight: approx. 1750 kg *Machine light *Spindle guard Scope of delivery: * 5x tool holders * Allmatic vise * Walter dividing head * Documentation * Spindle guard

Condition: used, Year of construction: 2017, x-travel 2.600 mm y-travel 700 mm z-travel 700 mm control Celos 840 D SL Operate Siemens turning speed range - main spindle 20 - 20.000 min/-1 power capacity - main spindel 35 / 25 kW Torque 130 / 86 Nm tool taper HSK-A63 b - axis +-100 ° table surface area 2.900 x 700 mm max. table load 2.150 kg number of toolpositions 120 pos. tool taper HSK-A63 max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool length 300 mm max. tool weight 6,0 kg rapid traverse ( X / Y / Z ) 40 m/min feed speeds max. 40.000 mm/min feed power max. 8 kN total power requirement 67 kVA weight of the machine ca. 16,24 t dimensions of the machine ca. 8,0 x 5,6 x 2,9 m CNC - Travel Column Milling Machine DMG MORI - DMF 260 - 7 - NC tilting milling head (B-axis ±100°) - Balluff BIS C tool identification system -> One read/write head each at the tool loading/unloading station -> Evaluation unit -> CNC software -> Balluff chips NOT included! - incl. workspace partition - MPC (Machine Protection Control) Nledpfxj Afpzis Ab Rsh - ATC (Application Tuning Cycle) - Dual changeover filter (25 µm) - Bed flushing / door flushing system (includes additional pump) - 2D surface feature (as an add-on to ATC) - EES (Extended Editing System) option - Provision for refilling the internal coolant supply (ICS) system - Provision for vacuum clamping - Clamping devices and machine vises NOT included!