Used Scm Si 4 Cn for sale (62,669)

Condition: good (used), Year of construction: 2000, functionality: fully functional, Wide belt sander SCM Sandya 40 M1 Year of manufacture 2000 S/N AE/020761 Manufacturer SCM Group S.p.A Italy Sanding width 1.350 mm Workpiece thickness min 4-170mm 1 sanding unit, calibration 250mm diameter Roller hardness °Shore 55 Vacuum table Main motor 11 kW ( 15 HP) Sanding belt length 2,620 mm Feed max 19 m/min Feed stepless Fixed working height 900 mm Sanding belt blow-off device Electropneumatic segment control Belt change side left SYEL CN 51 control unit Carpet feed with speed controller Electronically controlled sanding belt oscillation Main motor with disk brake Rubber-coated pressure rollers Automatic carpet centering Automatic table positioning Air requirement Nl/min 15 Operating voltage 400V/ 50 Hz Total power 40 Amp Lhjdpfxotttafo Akyjh Dimensions: L x W x H= 1917mm x 2134 x 2365mm Weight approx. 2540 kg

Condition: used, machine/vehicle number: 008381, X axis working area: 4250 mm Y axis working area: 2280 mm Lhjdpsx Swc Hsfx Akyoh Working Table: Flat table Main Electrospindle power: 12 KW Number of controlled axes: 5 axes Total number of drilling spindles: 11 Total number of tool changer positions: 24

Condition: used, Year of construction: 2001, Min./Max. working width (finished size): 23 - 180 mm Min./Max. working height (finished size): 6 - 105 mm Min. workpiece length: 300 mm Feed speed: 6 - 12 rpm Spindle speed: 6000 rpm Spindle diameter: 35 mm Motor power, horizontal spindle: 10 kW Motor power, vertical spindle: 7.5 kW Feed motor power: 1 kW Diameter of feed rollers: 120 mm Extraction port diameter 1 pc: 150 mm Extraction port diameter 2 pcs: 120 mm Weight: approx. 950 kg Storage location: Supplier Lhjdpeym D Eisfx Akyoh

Condition: used, mileage: 272,600 km, power: 260 kW (353.50 HP), first registration: 08/2015, fuel type: diesel, number of seats: 41, gearing type: mechanical, emission class: euro6, color: white, brakes: retarder, Equipment: ABS, air conditioning, bathroom, electronic stability program (ESP), navigation system, onboard kitchen, parking heater, * Our internal number: 1014 * NEW PAINT in 05/2026 * MB Tourismo RH K * Vehicle registered and in operation - mileage and condition may therefore vary. * CLUTCH and dual-mass flywheel replaced in September 2025 * In September 2023, over EUR 24,000 net was invested in this vehicle, including, among other things, through Evobus, with a new turbocharger, new retarder, air conditioning compressor serviced, all V-belts and idler/tensioner pulleys replaced, transmission sealed, oil pan sealed, oil change, etc. * First registered 08/2015 * First owner + Will registration * Mileage - original * 6-speed manual transmission * 39+1+1 seats / adjustable sideways and rearwards * Three-point seat belts * Tables on the back of the seats * DVD and monitor * TINTED GLASS * Retarder Lhsdey U A S Sjpfx Akysh * Cruise control * Distance control cruise control * ABS, ESP, EBS * Fog lights * Immobilizer * LED lighting * Brake assist * Lane keeping assist * Rear view camera * Toilet * On-board kitchen * Nozzle ventilation * Reading lights * Ski box compartment * Trailer hitch * Central locking * Raise/lower * USB connection * NEW TIRES ON FRONT AND REAR AXLE in August 2025 * Vehicle length: 10.32 / 2.55 / 3.37 m+ * etc. * PICK-UP PRICE - FINAL PRICE! * All information without guarantee * Subject to prior sale * We refer to our terms and conditions

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Cutting length: 4500 mm Cutting depth: 4300 mm Cutting height: 100 mm Main saw unit Main saw motor: 11 kW Ljdpfezbrnnox Akyohh Scoring saw unit Cutty cutting optimizer Grooving capabilities 1 fixed front table with air cushion system 3 mobile front tables with air cushion system Pusher carriage with 9 clamps Software: WinCut Label printer Approximate weight: 3700 kg Available from the end of September 2026.

Condition: used, Year of construction: 2004, Storage location: Nattheim Ljdpfx Ajvvi Hyskyshh

Condition: used, Year of construction: 2020, CNC-CONTROLLED MACHINING CENTER WITH MULTIFUNCTIONAL TABLE - WORK CELL VERSIONX400 CELLDrilling and milling made for you!The numerically controlled machining center is equipped with a wide range of milling/drilling tools to meet every need in the processing of wood and similar materials.- More powerful, with drilling spindles with 8,000 rpm and . Technology, the toughest spindle available on the market, with over 1,000 maintenance-free hours of use. Better and more comprehensively equipped, with various configuration options thanks to the multifunctional table to optimally equip the machine according to your needs. Easier and more understandable programming thanks to the integrated MAESTRO CNC CAD-CAM module. Easier to use: the work table is accessible at all times, the electrical cabinet and vacuum pump are integrated, and in the PRO SPACE configuration there are no guards. Supporting structure. The supporting structure consists of a particularly strong monolithic steel base, heavily ribbed and very rigid. The particularly wide support was specifically designed to give the machine stability, ensuring consistent precision regardless of the working conditions and eliminating the need to anchor the machine to the floor. The base forms a large and solid support for the mobile column: the work unit is thus equipped with a balanced, stable, and durable support that can withstand the most extreme stresses, ensuring higher quality performance and greater precision. The mobile gantry consists of a single, solid unit anchored to the base on both sides and slides on pyrotechnic guides with top-quality ball-return slides. The dual motorization along the X-axis ensures top performance even under demanding working conditions. The movement of the lower moving unit (X-axis) and the working unit along the rod of the moving unit (Y-axis) is achieved thanks to a rack/pinion transmission with helical teeth. this creates a greater tooth-to-tooth thrust which achieves greater acceleration and greater speed along the X and Y axes. The specially designed helical gearing ensures less wear on the mechanical components and less noise. The vertical Z axis is driven by a screw with ball return which ensures perfect balance with dynamic loading and strong acceleration and deceleration. The main milling unit is directly coupled to the Z axis carriage and ensures absolute quality of finishes as any vibrations are completely eliminated. Translation along the X-Y-Z axes is carried out by brushless motors driven by static inverters; These ensure: - Reduced processing times thanks to improved acceleration - Better positioning accuracy thanks to the high-resolution encoder - Zeroing of setup operations when switching on the machine thanks to absolute encoders - Zeroing of general maintenance operations since there are no brushes with the "brushless" system The management of the axis displacement and, in general, of the machine's working elements is carried out by an industrial NS module with digital D Ljdpfx Ajvvi N Iokyshh

Condition: like new (used), Year of construction: 2023, SCM Accord 40 fx CNC machining center with the following equipment: Ljdoyfgzdjpfx Akyjhh Working area X-Y = 6360 x 1905 mm, Z = 350 mm OF0158 Usable Z clearance height = 350 mm with H50 suction cups OF0165 Axis travel speed of Accord 40 fx Version PRO-SPEED OF0168 Pendulum (dual-zone) operation OF0169 Automatic axis lubrication OF0299 TELESOLVE remote maintenance via Internet 450328 eye-M PRO control console with integrated PC 450291 Additional fixed control panel 870068 TECPAD – remote control of machine functions 560058 No. 10 carrier rails MATIC – L1825 230429 MAXI working unit – Prisma KT 1 870046 Prepared for angle gearbox "Prisma KT-KS" 470014 Air nozzle for tool 870119 Device for tool length measurement 870120 Device for panel thickness measurement 870009 Drilling unit F16 OF0176 Front stop row H50 for worktable with 10 carrier rails 510205 Preparation for clamps for worktable with 10 carrier rails 480178 Front stop row H110 for worktable with 10 carrier rails 480105 Rear stop row H110 for worktable with 10 carrier rails 480137 First lateral stop row H110 for worktable with 10 carrier rails 480005 Suction cups H110, 145x145 mm, 36 pcs 480006 Suction cups H110, 145x55 mm, rotatable, 10 pcs 480007 Suction cups H110, 180x65 mm, rotatable, 10 pcs 480018 Suction cups H110, 145x30 mm, rotatable, 5 pcs 480410 Lifting devices H110, 8 pcs 350016 Vacuum pump 250 (300) m³/h 560538 Additional automatically adjustable base for MATIC 10 carrier rail 190046 PRO-SPEED safety system 524800 "SAV€NERGY" 2.0 energy saving system 210837 TR12 – lateral tool magazine 210056 Rapid 24 – rear tool magazine OF0182 Air conditioning for control cabinet OF0438 Human-machine interface software (HMI) MAESTRO ACTIVE OF0543 Operating system Windows 10 embedded 64 bit OF0422 Machine operating interface software Maestro cnc OF0435 Hardware dongle for Maestro cnc 524309 Maestro 3D-Advanced module 109993 MACHINE LANGUAGE: German SPECIAL FEATURES INCLUDED IN MACHINE CONFIGURATION: - Extension of maximum panel width to 2,120 mm for full processing; traverse length remains unchanged at 1900 mm. - 10 support suction cups for remnants MACHINE ALREADY DISMANTLED AND STORED. LIST PRICE 2023 EUR 399,890.--

Condition: good (used), Year of construction: 1997, machine/vehicle number: AB/113309, functionality: fully functional, power: 4 kW (5.44 HP), input voltage: 400 V, input frequency: 50 Hz, cutting height (max.): 95 mm, cutting width (max.): 1,300 mm, saw blade diameter: 300 mm, tilt adjustment saw blade: 45 °, height adjustment type: mechanical, saw blade bore: 30 mm, actuation type: manual, rotational speed (max.): 4,000 rpm, total width: 1,300 mm, overall weight: 750 kg, year of last overhaul: 2025, Equipment: CE marking, saw blade guard, scorer, SCM Si 320 Panel Saw Used machine Serial No. AB/113309, Year of Manufacture 1997 Article Number: JA_G260501 History The machine comes from a vocational school. Due to investment reasons, a new saw was purchased in 2026. The last maintenance was carried out in 2025, during which belts and various small parts were replaced. Description Cutting height 90° max. 95 mm Saw blade max. 300 mm Adjustment manual Scoring saw yes Cutting width 1300 mm Adjustment manual Table length 3200 mm Saw blade swivel 0° - 45° Adjustment manual Angle stop yes Power 400V / 50 Hz 4.0 kW Speed 4000 rpm Weight approx. 750 kg Dust extraction 100 + 80 mm Dimensions LWH 3600 x 2100 x 1400 mm Condition / Work Carried Out • Machine cleaned • Machine function tested • Age-related and usage-related signs of wear • Available from stock Subject to errors and changes in technical specifications. Note: Used Goods Lhjdpfx Akey Uurqeysh • Prices are quoted as ex-works prices (unless otherwise stated!) from our location in Ottendorf-Okrilla/Germany - free loading! (if not otherwise stated) • Subject to prior sale! • You will receive an invoice with VAT shown. • All items are sold as seen, without any warranty claims. The buyer is free to inspect the items at our location. • Our general terms and conditions apply. • Special agreements are only possible in writing. • Any items in the background of the picture are not included in the scope of delivery. • Saw blades are for illustrative purposes only and are not included in the scope of delivery. Shipping Options: • We will gladly provide you with a transport quote. • Collection from our location in Ottendorf-Okrilla, free of charge by arrangement. • (Optional: Our trained service personnel can assemble the machine at your location and provide a brief instruction. Travel, transport and service times are subject to an additional charge.)

Condition: used, mileage: 380,000 km, power: 338 kW (459.55 HP), first registration: 06/2023, fuel type: gas, empty load weight: 10,540 kg, maximum load weight: 15,460 kg, overall weight: 26,000 kg, axle configuration: 6x2, wheelbase: 4,800 mm, next inspection (TÜV): 06/2026, color: red, driver cabin: other, gearing type: automatic, emission class: euro6, suspension: air, number of seats: 2, Equipment: ABS, air conditioning, cruise control, differential lock, parking heater, traction control, trailer coupling, CERTIFIED PRE-OWNED Standard, unladen weight: 10,540 kg, permissible total weight: 26,000 kg, leather seats, air suspension, lift axle, intarder, trailer coupling: Rockinger, BDF interchangeable frame: C715/C745, electronic braking system EBS, electronic stability program ESP, traction control system ASR, auxiliary air conditioning, comfort seat driver/passenger: lumbar support, driver/passenger seat with air suspension, driver's seat height adjustable, armrest passenger, seat heating driver/passenger, lane keeping assist, multi-function leather steering wheel, lumbar support driver/passenger, light alloy rims: Alcoa, electric window lifts, roof spoiler, exterior mirrors electric and heated, immobilizer, central locking with remote control, underrun protection: front, sun visor, trailing steering, cool box, axle load display, hill start assist, daytime running lights, connector 1x15 pin, lift roof, insulated cab, heated windshield, speed limiter: 90 km/h, emergency braking assist, storage compartment, sprung cab, ECOSWITCH VDI interface for telematics systems, trailer version, deep coupling system, ECO-Fleet driving style analysis (DSE) and driver fatigue detection (DAS), ECO-ROLL, sold on consignment, errors and changes excepted. Ledpfoy Unipsx Akyjhh

Condition: used, functionality: fully functional, SCM si12 panel saw Specifications: • Condition – used, after a comprehensive inspection • Manufacturer – SCM • Model – si 12 • Carriage length – 150 cm • Diameter of installed saw blade – 300 mm • Main saw motor – 3.0 kW • Saw blade can be tilted manually • Manual raising and lowering of the saw blade • Max cutting height – approx. 90 mm • Side table, dimensions: 85 x 60 cm • Dust extraction port – 100 mm diameter • Weight – approx. 450 kg • Overall dimensions: 350 x 150 x 100 cm (width x length x height) • Dimensions for transport: 90 x 150 x 100 cm (width x length x height) Additional information: Lhsdoza Hi Rspfx Akyoh • The machine is in good technical condition and ready for immediate use. • The photos show the actual condition of the item being sold. • It is possible to turn on and inspect the machine on-site. • Free training on how to operate the machine is provided (at the company's premises). • The price listed in the auction does not include VAT and transport costs. Financing and transport: • We arrange transport using our MDD fleet, courier companies, or external carriers. • We offer financial support in the form of leasing or a leasing loan.

Condition: used, Year of construction: 2022, Incl. 2nd glue pot. Glue thickness for roll edges: 0.4 - 3 mm. Glue thickness for strip edges: 5 mm. Min. - Max. workpiece height: 8 - 50 mm. Feed speed: 9 m/min. Pre-milling unit. Glue unit. Trimming unit. Rounding unit. Flush trimming unit. Radius scraper. Flat scraper. Buffing unit. Spraying unit. Lhedpfx Aew Aig Sokyjh Storage location: Customer.

Condition: used, Year of construction: 1960, functionality: fully functional, machine/vehicle number: 3183, Parameters: Swing over bed: 4000 mm Distance between lathe tips: 30,000 mm Speed: 0.5-80 rpm Workpiece weight: 160 t Lhjdpfx Aswqlc Eokyeh Control system: CNC SIEMENS SINUMERIK 840 D

Condition: excellent (used), SCM Sintex XL Four-Side Planer Working width: 23-180 mm Working height: 6-100 mm Number of spindles: 4 Spindle arrangement: Bottom: 7.5 kW Right: 5.5 kW Left Top Minimum length of workpiece: 300 mm Ljdpfx Aow Hbf Iskyehh Spindle diameter: 35 mm Feed speed adjustable by inverter: 4-12 m/min Technical documentation CE certificate

Condition: excellent (used), SCM P64 Four-Sided Planer Working width: 180 mm Working height: 100 mm Ljdpewyiyasfx Akyohh 4 spindles Spindle configuration: Bottom 4 kW Right/Left 5.5 kW Top 4 kW Spindle diameter: 35 mm Two-stage feed: 6-12 m/min Electric height adjustment Adjustable spindles Infeed table length: 2300 mm Machine dimensions: 3300x1200x1600 mm

Condition: new, I am offering a professional drum pump from the renowned German manufacturer Lutz – designed for use with various liquids (chemicals, oils, industrial media). ✅ Condition: ✔️ New Lhodpfxoyzulws Akyoh ✔️ Motor housing has been replaced with an original (factory) part – the previous one was damaged during transport ✔️ Fully functional, ready for operation 🔩 Technical data: Manufacturer: Lutz Pumpen GmbH (Germany) Pump model: MP PP 50/41-R DL SS Motor: MI 4-230 Power supply: 220–230 V / 50 Hz Power: 450–500 W Current: 2.5 A Protection class: IP24 Tube length: 1200 mm Material: PP (polypropylene) + stainless steel (SS) ⚙️ Applications: - Industrial chemicals - Oils, technical fluids - Industry, workshops, manufacturing - Emptying barrels and tanks 📦 Included: ✔️ Lutz pump ✔️ MI 4-230 motor ✔️ Hose + fittings as shown in the photos 🌍 Country of origin: 🇩🇪 Germany ℹ️ Additional information: - High-quality equipment – German-made - Ideal for professional applications - Shipping or personal collection available

Condition: excellent (used), Electric motor from Kaltenbach Maschinenfabrik for sale Price applies to 1 unit Condition: used, fully functional Motor tested with measuring instrument Normal signs of use and storage visible Technical data Ledpjyv Uvxofx Akyohh Manufacturer: Kaltenbach Maschinenfabrik Type: DKV 112M 238 4 Three-phase motor Power: 1.7 / 2.6 kW Voltage: 400 V, 50 Hz Protection class: IP54 Insulation class: F Speed: 700 / 1415 rpm Dahlander multi-speed motor Shaft diameter approx. 28 mm

Condition: good (used), Code: 0353 Brand: SCM Model: SIGMA 85 KC - CE Standard Electronic horizontal panel saw with clamps for precise cutting of panels, suitable for joinery, furniture, custom made furniture, doors, kitchens, plastics, composite materials and various – CE Standard Technical data: Cutting length 3200 mm Cutting width 3200 mm Blade projection 85 mm Ljdpfx Asy A Svpokyehh Blade carriage feed speed 6–30 mt/min N°7 panel clamps to ensure the pack is held securely in place Main blade diameter 350 mm Hole 80 Main blade motor 11 Kw Main rotation speed 3900 rpm Scoring unit diameter 160 mm - Hole 55 – Motor 1,5 kW Automatic aligner: ensures precision during cross-cuts, reducing processing times N°3 front panel support surfaces Suction inlet diameters: n° 2 diameter 120 - n° 1 diameter 150 Compressed air 7-8 bar Overall dimensions of assembled machine mm 5700 x 4350 x 1700 h Weight kg 3300

Condition: good (used), Year of construction: 2005, operating hours: 7,860 h, load capacity: 3,500 kg, lifting height: 4,650 mm, fuel type: diesel, mast type: triplex, construction height: 2,250 mm, Linde H35D triplex 465 Freelift / Sideshift / 4th Function 2005 VW DIESEL Video available via Whatsapp. Continuous stock, see website. Prices ex Nuland. Van de Wert Trading B.V. has a variable stock of machines, trucks, trailers and accessories. All our deliveries are at trade prices in AS-IS condition without warranties (see our general terms and conditions). For viewing and/or a test drive, you can make an appointment without obligation. Please call ahead as we are not always present. Van de Wert Trading B.V. Bedrijfsstraat 3 Lhjdeywu Scjpfx Akyjh 5391 LR Nuland

Condition: used, Cart 320cm Ledpfx Aey Rrryjkyohh Tiltable blade slash 380V

Condition: used, Year of construction: 1999, Carriage length: 3800 mm Cutting width at the width stop: 1500 mm Cutting width at the cross-cut fence: 3200 mm Cutting depth: 140 mm Lhodpevxi Ddofx Akyeh Scoring unit: no Saw blade height adjustment: electric Swivel adjustment saw blade: electric Width stop adjustment: electric / position control Saw blade angle display: digital Cutting height display: - Width stop display: Digital Cutting ruler display: Scale Saw blade diameter: 400mm Speeds: 3 Motor power: 7,5kW Motor brake: Yes, automatic Suction connection: 80mm and 120mm Machine length: 3900mm Machine width: 2200mm weight: 1000kg

Condition: ready for operation (used), Year of construction: 2003, number of axes: 3, This 3-axis SCM PRATIX 48 NST was manufactured in 2003. It features a working area of approximately 1220 x 2440 mm and is equipped with a vacuum nesting table. The machine includes an HSK electrospindle with a power range of 7.5–9 kW and a tool changer, either linear or side-mounted. If you are looking to get high-quality CNC wood machining capabilities, consider the SCM PRATIX 48 NST machine we have for sale. Contact us for further details. Lhjdpfx Aksy R Rp Doyeh • Working area: approx. 4' × 8' (1220 × 2440 mm) • Table: Vacuum nesting table • Spindle: HSK electrospindle, 7.5–9 kW • Tool changer: Linear or side-mounted ATC • Drilling block: Vertical drills (standard) • Controller: SCM Xilog

Condition: used, Year of construction: 2015, functionality: fully functional, power: 10 kW (13.60 HP), input voltage: 400 V, travel distance X-axis: 4,050 mm, travel distance Y-axis: 2,560 mm, travel distance Z-axis: 280 mm, workpiece length (max.): 3,120 mm, workpiece width (max.): 2,160 mm, workpiece height (max.): 105 mm, number of axes: 4, number of slots in tool magazine: 16, Equipment: CE marking, For sale is a well-equipped CNC machining center, FORMAT-4 profit H10 22.32, manufactured in 2015. This machine is perfectly suited for precise processing of wood, MDF, plastics, and sheet materials. The FORMAT-4 H10 stands out for its high traverse speeds and robust construction. Particularly noteworthy are the powerful 10 kW HSK-F63 milling spindle, the 360° C-axis, and a total of 16 tool positions. Technical Data * Manufacturer: FORMAT-4 * Model: profit H10 22.32 * Year of manufacture: 2015 * Type: CNC machining center Working Area * X axis: 3,120 mm * Y axis: 2,160 mm * Z axis: 105 mm Traverse Paths * X: 4,050 mm * Y: 2,560 mm * Z: 280 mm Traverse Speed * X/Y: 100 m/min * Z: 30 m/min Milling Spindle * 10 kW HSK-F63 milling spindle * Speed range: 1,000 – 24,000 rpm * Clockwise/counterclockwise rotation * Ceramic bearings * Air-cooled Tool Changer * 2 tool changers with a total of 16 tool positions * HSK-F63 interface * Tool slots on the machine frame and mounted laterally Additional Units * C-axis 0–360° Vacuum/Table * Matrix/grid table * 2 vacuum pumps, each 250 m³/h Lodpjy Smi Ajfx Akyohh * Two rows of stops Control/Software * FORMAT-4 H10 control system * WoodFlash software * DXF import * 3D graphic display * Parametric programming * Tool database for up to 500 tools * Mobile operator console * Handheld terminal Additional Equipment * Automatic central lubrication * UPS for the control computer * Network/internet preparation * Central extraction system * Preparation for drilling head * Operator tools and documentation included Condition: Machine from ongoing production. Well-maintained condition. Inspection by appointment possible.

Condition: excellent (used), SCM minimax tw 45c spindle moulder (bottom spindle) Spindle adjustable up and down manually Spindle tiltable manually at 0-45 degrees 30 mm spindle diameter, Lhjdpfx Akoy R Sgqeysh 5 kW motor, 3 spindle speeds. Very good condition, fully ready for work.

Condition: used, total width: 1,000 mm, total height: 1,600 mm, Colour: Grey Empty weight: 1.300 kg Dimensions (LxBxH): 340 x 100 x 160 cm Four-sided planer SCM Sintex 380V 4 spindles Spindle below / above 7.5kW Lhsdoyw Sg Depfx Akyoh Spindle left/right 7.5kW Max working height 105mm Max working width 180mm Input table 2300mm Spindle diameter 40mm Total dimensions 3400x980x1600mm (LxWxH), weight 925kg - Documentation available: No - CE certificate present: No - Number of spindles [pcs.]: 4 - Min. planing height [mm]: 100 - Feed table length [mm]: 2300 - Feed roller diameter [mm]: 120 - Feed motor [kW]: 7.5 - Diameter extraction nozzle [mm]: 120 - Voltage [V]: 380 - Transport dimensions: 3400mm x 1000mm x 1600mm (l x w x h) - Transport weight [kg]: 1300kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels