Used Sem Fl 58 Mc for sale (9,306)

Condition: ready for operation (used), SMW Autoblok SRG 1C grinding bezel ID 225020 SN 1582110102 ,used, good condition, 100% working, scope of delivery as per photos Dkedpfx Adjxah Dus Nel

Condition: ready for operation (used), SEM MT30U4-57 Ferrite Brushed DC Servomotor SN:J2514 ,used, normal signs of wear, 100% functional, scope of delivery as per photos Dksdst Ttkmopfx Ad Nsl

Condition: ready for operation (used), SMW Autoblok SRG 1 C grinding steady rest ID 225020 SN 1582110103 ,used, good condition, 100% working, scope of delivery as per photos Dksdsxah Dhjpfx Ad Nol

Year of construction: 2016, condition: good (used), Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper Dkjdpfx Aded Aqtre Nel -Sheet metal claws -Span: 0 to 30 mm -Load capacity: 3000 kg -Number: 2x terminals available -Price: per piece -Weight: 15.4 kg/piece

Condition: ready for operation (used), NUM 207202 830M H 11162/056 9910 keyboard control interface 9611028 + 2 keys Serial number: 13586 Lapp cable - length: 1.25 m, used, in good condition, 100% functional, scope of delivery as per photos. Dedpjx Et Rmjfx Ad Nekl

Condition: new, maximum load weight: 37,820 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our entire vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpt from the equipment. Full equipment details available upon request. Dkedpfxsw Tpqwo Ad Njl Gooseneck: - Gooseneck with beveled front corners approx. 45° and rear chamfer approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Hardwood floor covering approx. 30 mm thick Loading area: - 1 pair of fixed wheel recesses in front of the axles, approx. 2,610 x 970 x 400 mm (L x W x D) - Wheel recesses with square climbing slats approx. 15 x 15 mm and widenings in the lower section - Between the 1st and 2nd axles, a pair of fixed wheel recesses, approx. 1,610 x 700 x 400 mm (L x W x D) - Incl. 3-piece removable galvanized covers over the wheel recesses (W approx. 670 mm) – max. point load approx. 5 t/each - Recess in the chamfer and extending into the loading area for receiving the excavator bucket arm (approx. 2,900 x 750 x 210/290 mm (L x W x H)) - 1 pair of lashing rings, horizontal, at the front of the loading area (LC 10,000 daN) - 5 pairs of flip-out lashing rings (LC 5,000 daN) - 3 pairs of flip-out lashing rings (LC 10,000 daN) - 2 pairs of lashing rings in the excavator arm recess (LC 5,000 daN) - Cut-outs in the outer frame of the loading area for securing straps (LC 2,000 daN) One-piece Steel Ramps: - One pair of galvanized one-piece steel ramps, approx. 3,000 x 800 mm, with approx. 48 mm thick hardwood covering - Ramp with hydraulic lifting mechanism, hydraulically adjustable - Maximum load per pair: 40,000 kg - In accordance with Regulation 1230/2012/EU, ramps with a length less than 300 mm do not count towards the vehicle length in the driving position Landing gears: - JOST landing gears (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: - BPW axles and suspension, 2 fixed axles, 1 trailing steering axle - Technical axle load: 12,000 kg each - Electromagnetic reverse lock, activated via reverse gear and manually - Air suspension with lift and lower valve - Axle tool kit Tyres: - Tyres 235/75 R 17.5 3PMSF – manufacturer of our choice - TPMS tyre pressure monitoring system in accordance with ECE R 141. The data transmission to the truck is via standardized EBS interface according to ISO 11992. For correct display, the truck must be able to transmit and display this data Braking system: - WABCO braking system in accordance with EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit Steel construction: - Steel structure made of high-tensile fine-grain steels - Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Electrical system: - Electrical system according to EU regulations - Lighting 24 volts ASPÖCK-NORDIK (ASS3) - All LED side marker lights flash with the indicator - ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets as per ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Paintwork: - Complete steel structure automatically shot-blasted with blasting wheel machine after welding - Second shot-blasting using corundum for optimal coating adhesion - HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) to ensure maximum corrosion protection - Final painting with 2 coats of two-component topcoat, single color in RAL 3002 Carmine Red, according to the RAL system 841GL - Rims in silver - Rear section metallized and in RAL 9010 (continuation see ori

Condition: ready for operation (used), Walter Flender Type: TN3B/4 14 Motor SN:A49058323, used, normal signs of wear, 100% functional, as per photos included Dksdpfox Dwh Dox Ad Nsl

Condition: used, machine/vehicle number: 1077, Year of construction: 2023, operating hours: 81 h, lifting height: 8,000 mm, fuel type: diesel, motor manufacturer: -, Lifting capacity: 25.000 kg Maximum passing height: 286 cm Front tyres / undercarriage remaining: 95 Rear tyres remaining : 95 Tyre brand: - Front tyre size: - Rear tyre size: - Dedpfx Adswfcdis Nokl Transport dimensions (LxWxH): 4.12x1.8x2.85 Please contact PFEIFER GROUP for more information

Condition: excellent (used), axle configuration: 3 axles, color: blue, Year of construction: 2019, Equipment: ABS, = Additional Options and Equipment = - Lifting axle - Air suspension = Further Information = Year of manufacture: 2019 Rear axle 1: Twin tires; Steering Rear axle 2: Twin tires; Steering Rear axle 3: Twin tires; Lifting axle; Steering Technical condition: very good Visual condition: very good Price: On request ROJO TRAILER KT3 ST EXTENDABLE SEMI LOW LOADER 3x SAF hydraulic steering axles Last axle is liftable Remote control Air suspended Tyre size: 245/70/R17.5 Neck length: 308 cm Dkedpfxsuxxc To Ad Nol Extendable loading platform Loading platform length: 678 cm + 300 cm extendable (total loading platform length: 978 cm) Width of loading platform: 254 cm Loading deck height: approx. 89 cm Kingpin to rear of low loader: 927 cm Total length: 987 cm 4x hydraulic support legs Lashing eyes/rings Prepared for twistlocks for 20 ft container Follow us on Instagram, Facebook, and TikTok to see videos of our trucks, commercial vehicles, and machines available for sale. Wir sprechen Deutsch We speak English Hablamos Español

Condition: excellent (used), axle configuration: > 3 axles, first registration: 08/1994, color: yellow, Year of construction: 1994, Equipment: ABS, = Further options and accessories = - Air suspension = Additional information = Axle configuration Rear axle 1: Twin tires Rear axle 2: Twin tires Rear axle 3: Twin tires; Steering Rear axle 4: Twin tires; Steering Weights Unladen weight: 11,420 kg Functional Loading platform height: 77 cm Extendable body: Yes Condition Technical condition: Very good Optical condition: Very good Financial information Price: On request NOOTEBOOM OSD-50-04-V SEMI LOW LOADER 4x SAF axles 2x steering axles (trailing) Air suspension Tyre size 205/65/R17.5 Extendable loading platform Length 923 cm + 670 cm extendable, total loading platform length 1593 cm Width of loading platform 275 cm + 2 x 27.5 cm side extension, total platform width 330 cm Height of loading platform approx. 77 cm when loaded Gooseneck length 388 cm Lashing eyes and stake pockets 2x rear supports FOLLOW US ON INSTAGRAM: GEURTSTRUCKS WE SPEAK GERMAN HABLAMOS ESPANOL WE SPEAK ENGLISH Dsdpfx Aouxy Dfod Nekl

Condition: excellent (used), axle configuration: 2 axles, first registration: 09/2018, color: red, Year of construction: 2018, Equipment: ABS, = Additional options and accessories = - Air suspension = Further information = Rear axle 1: Twin tires Rear axle 2: Twin tires; Steered Unladen weight: 8,940 kg Loading platform height: 90 cm Extendable body: Yes Technical condition: Very good Optical condition: Very good Price: On request DANSON HLB45 2-AXLE EXTENDABLE SEMI LOWLOADER 2x SAF axles 1x steering axle (trailing) Tire size: 245/70/R17.5 Extendable loading platform Length: 740 cm + 500 cm extendable, total platform length 1240 cm Platform width: 255 cm + 2x 102.5 cm extendable, total platform width 460 cm!!! Platform height: ± 90 cm Gooseneck length: 40 cm Hook eyes, lashing pots, twistlocks Follow us on Instagram: GEURTSTRUCKS Dodoux Ad Ujpfx Ad Nekl We speak German Hablamos Español We speak English

Condition: used, machine/vehicle number: 356, mileage: 142,700 km, power: 206 kW (280.08 HP), first registration: 01/1999, fuel type: diesel, overall weight: 26,000 kg, tire size: 315/70 r22,5, axle configuration: 6x2, wheelbase: 4,200 mm, brakes: constant throttle, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro2, suspension: air, Equipment: ABS, air conditioning, differential lock, had accident, hydraulics, low noise, traction control, Air conditioning Faun type 26/612 body Engine running Air compressor defective Dksdpfenm A Ewex Ad Nsl NOT READY TO DRIVE !!! ONLY FOR SLAUGHTER!!! VIN-No. 930219 Errors excepted

Condition: new, maximum load weight: 38,140 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available immediately and at short notice, on our website. Excerpt from equipment. Full equipment details available on request. Gooseneck: - Gooseneck with front corners chamfered approx. 45° and rear bevel approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Hardwood flooring, approx. 30 mm thick Loading area: - Telescopic loading area with rear incline approx. 1,000 mm x 8° - Between 1st and 2nd axle: one pair of fixed wheel recesses, approx. 1,610 x 970 x 400 mm (L x W x D) - Incl. 3-piece removable galvanized cover over wheel recesses (width approx. 670 mm – max. point load 5 t / pc.) - 1 pair of flat lashing rings at the front of the loading area (LC 10,000 daN) - 4 pairs of outward folding lashing rings (LC 5,000 daN) - 3 pairs of outward folding lashing rings (LC 10,000 daN) - Cutouts in the outer frame for attaching tie-down straps (LC 2,000 daN) Landing legs: - JOST landing legs (manual) with 2-speed gearbox for 24 t lifting capacity (50 t test load) Tyres: - Tyres 235/75 R17.5 3PMSF, make at our discretion - TPMS tyre pressure monitoring system in accordance with ECE R 141 - Data transfer to the towing vehicle via standardised EBS interface as per ISO 11992 - For correct display, the towing vehicle must be able to receive and display this data Axles: - BPW axles and suspension, 2 axles rigid, 3rd axle self-steering - Technical axle load: 12,000 kg Djdpfx Asw Tpq Dod Nokl - Electromagnetic reverse lockout activated automatically when reversing and manually - Air suspension with lifting and lowering valve. Axle tools Braking system: - WABCO braking system according to EU regulations with EBS-E (2S2M) without piping to the tractor unit Electrical system: - Electrical system per EU regulations - LED lighting 24 Volt ASPÖCK-NORDIK (ASS3) - All LED side marker lights flash with the indicator - ASPÖCK-UNIBOX at front connection strip with 24N, 24S & 15-pin sockets, according to ISO; 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Steel construction: - Steel structure made of high-strength fine-grained steels - Steel qualities: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork: - Complete steel structure automatically shot-blasted after welding in a wheel-blasting system - Second shot-blasting with corundum for optimum coating adhesion - HRM metallization of entire chassis with ZINACOR 850 (85% zinc/15% aluminium) for maximum corrosion protection - Final painting with 2 layers of 2K topcoat, single-colour in RAL 3002 Carmine Red, rear section metallized and painted in RAL 9010 Pure White - Metallic finish not available - Paint structure tested in salt spray test according to ISO 9227-NSS - Internal cavities sealed with special wax Including the following accessories: - On the gooseneck and rear, left and right, one holder for warning signs each, including socket - Spare wheel holder in front of the front wall (without spare wheel) - 2-inch king pin - Galvanized steel front wall, approx. 400 mm high - Yellow-red air couplings on the galvanized front connection bar - Galvanized folding supports under the inclination at the rear of the loading area - A hardwood crash protection strip at the rear wall from gooseneck to the loading area - 1 pair of recessed lashing rings along the central beam at the rear inclination (LC 10,000 daN) - Aluminium drop sides and tailgate on the gooseneck

Condition: new, maximum load weight: 37,680 kg, overall weight: 50,960 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete inventory of vehicles, including those available for immediate and short-term delivery, on our website. Extract from the equipment features. Complete specification available on request. Gooseneck * With approximately 30 mm thick hardwood flooring. Gooseneck with straight rear section * 3 pairs of lashing rings (LC 5,000 daN) Loading Area * Extendable design * 5 pairs of outward-folding lashing rings (LC 5,000 daN) * 3 pairs of outward-folding lashing rings (LC 10,000 daN) * 1 pair of recessed lashing rings at the front of the loading area (LC 10,000 daN) * Cutouts in the outer frame of the loading area for attaching tension straps (LC 2,000 daN) * Approx. 48 mm thick hardwood flooring, treadplate covering above the axles Landing Gear * JOST mechanical landing gear with 2-speed gearbox, lifting capacity approx. 24 t (test load approx. 50 t) Tyres * 205/65 R 17.5 Axles * BPW axles and suspension * 1st axle fixed, all other axles hydro-mechanically forced-steered * Air suspension with lift and lower valve Brake System * In accordance with EU regulations, with EBS-E (4S3M) without connection lines to the tractor unit Steel Construction * Made of high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork * Premium and durable corrosion protection for the standard shot-blasted welded frame, guaranteed by a two-component (2K) zinc dust primer * High-quality two-component (2K) top coat, single colour RAL 3002 carmine red * Rims in silver Accessories Included * 2" king pin * Galvanised steel front wall, approx. 400 mm high * Yellow-red air couplings on galvanised front connection strip Dkodpfxov Etx Eo Ad Nsl * 4 chocks with holder on the front wall * Spare wheel holder in front of the front wall * Electro-hydraulic unit * Steering from the front and rear via cable remote control with push buttons, including single-track control of the axles (without installation in the tractor unit) * European reflective signs (red-yellow) at the rear of the trailer * Yellow reflective tape according to EU regulations on sides, extensions, and rear of the trailer * Bracket for warning signs including socket, left and right on the gooseneck and rear plate * Bracket for rotating beacon at the rear of the trailer * Galvanised foldable support legs under the loading area's chamfer * Load gauge for determining axle loads including load diagram * 7 pairs of WADER container pockets for: 1x 20' or 1x 40' container on the loading area, 1x 40' container over the gooseneck, or 2x 20' containers * Support block with 1 pair of WADER container pockets, fifth wheel load approx. 20,000 kg * 7 pairs of stake pockets for approx. 100 x 50 mm plug-in stakes in the outer frame of the loading area * Galvanised, extendable width extensions, approx. 230 mm per side * Sliding hook-in rails for aluminium loading ramps at the rear of the vehicle * 1 pair of recessed lashing rings along the central beam at the rear of the loading area (LC 10,000 daN) * 2 pairs of ferry rings under the gooseneck and 2 pairs at the rear * BEKAMAX (Pico) central lubrication system with standard grease NLGI-2 and removable pump protection * 2 LED reversing lights mounted at the rear * Acoustic reversing warning signal * HRM Metallisation (High Resistance Metallisation)

Condition: new, maximum load weight: 33,865 kg, overall weight: 48,000 kg, axle configuration: 3 axles, Equipment: ABS, You can find our complete range of vehicles, including those available for immediate delivery or on short notice, on our website. Below is an excerpt from the specification. The full equipment list is available upon request. Gooseneck: * Gooseneck with front corners chamfered approx. 45° and a rear bevel approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Load area: * Double extendable design with rear bevel approx. 500 mm x 8° * 6 pairs of folding external lashing rings (LC 5,000 daN) * 4 pairs of folding external lashing rings (LC 10,000 daN) * 1 pair of recessed lashing rings at the front of the loading area (LC 10,000 daN) * 1 intermediate table approx. 250 mm * Hardwood flooring approx. 48 mm thick, over axles with checker plate covering * Cut-outs in the external frame of the loading platform for attaching tie-down straps (LC 2,000 daN) Axles: * BPW axles and suspension, all axles forced-steered hydro-mechanically * Design axle load: 12,000 kg each * Air suspension with lift and lower valve * Axle tools included Tyres: * 245/70 R 17.5, load index (146/146 F) * Brand of our choice Landing legs: * JOST mechanical landing legs with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Braking system: * Braking system according to EU regulations with EBS-E (2S2M) without connection lines to the tractor unit Paintwork: First-class and durable corrosion protection * High-quality, one-colour 2-component (2K) topcoat in RAL 3002 carmine red * Rear section metallized and coated in RAL 9010 (pure white) Steel Structure: Steel construction from high-strength fine grain steels. * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Electrical system: * Electrical system according to EU regulations * 24 Volt lighting ASPÖCK-NORDIK (ASS3) * ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets, compliant with ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Including the following additional equipment: Dedpjw Tprzjfx Ad Nokl * 2-inch kingpin * Galvanized steel front wall, approx. 400 mm high * Yellow-red air couplings at the galvanized front connection strip * Spare wheel carrier in front of the front wall * Electro-hydraulic unit * Rear and front steering via cable remote control with push-buttons, with single-track monitoring of the axles (without installation in the tractor unit) * Mount at the rear of the gooseneck for aluminum loading ramps * Removable aluminum ramp hanging rail at the rear of the vehicle * Galvanized folding supports beneath the slope of the load area * On the gooseneck: plug-in aluminum side boards and rear board, approx. 2,440 x 400 mm (L x H) * The rear galvanized stanchions are removable (body length approx. 2,560 mm) * One galvanized toolbox, integrated in the chamfered gooseneck * 4 pairs of WADER container pockets in the loading area for one 20', two 20', one 40' or one 45' container * 8 pairs of stanchion pockets (approx. 100 x 50 mm) in the external frame of the loading platform * Galvanized extensions, extendable by approx. 230 mm per side * Adjustable hanging rails for aluminum ramps at the rear of the vehicle * 2 pairs of ferry rings under the gooseneck and 2 pairs at the rear * Central lubrication system with 2 BEKAMAX (Pico) pumps, filled with standard grease NLGI-2 and removable pump guard * 2 LED reversing lights mounted on the rear panel * HRM Metallization (High Resistance Metallisa

Condition: new, maximum load weight: 39,720 kg, overall weight: 50,960 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Sample equipment features. Full specification upon request. Gooseneck * With beveled front corners approx. 45° and rear bevel approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring, approx. 30 mm thick Loading Platform Loading platform in extendable design * 5 pairs of fold-out outer lashing rings (LC 5,000 daN) * 3 pairs of fold-out outer lashing rings (LC 10,000 daN) * 1 pair of recessed lashing rings at the front of the loading platform (LC 10,000 daN) * Recesses in the outer frame of the loading platform for securing straps (LC 2,000 daN) * Hardwood flooring approx. 48 mm thick, over axles with chequer plate covering Landing Gear * JOST (mechanical) with 2-speed gearbox, approx. 24 t lift capacity (approx. 50 t test load) Axles * BPW axles: 2 fixed axles, 2 steering axles, drum brakes * Air suspension with lift/lower function * Self-steering axle with electro-magnetic reverse lock, activated via reverse gear or manually * Tires: 205/65 R 17.5 Brake System * Wabco brake system in accordance with EU directives with EBS-E (4S3M), without interconnecting lines to the tractor unit Steel Construction * Made of high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa) Paintwork * First-class, durable corrosion protection of the standard shot-blasted welded frame, guaranteed by a 2-component (2K) zinc dust primer Dkjdpfxou Sd U Us Ad Nsl * High-quality 2-component (2K) top coat, single-color, RAL 3002 Carmine Red * Rear section metallized and painted in RAL 9010 (Pure White) * Rims in silver Accessories Included * 2-inch king pin * Galvanized front steel bulkhead approx. 400 mm high * Spare wheel holder in front of bulkhead * Yellow-red air couplings on galvanized connector bar front * 4 wheel chocks with holder at bulkhead * Bracket at rear of gooseneck for aluminum loading ramps * Galvanized folding supports under inclined edge of loading platform * Holder for beacon at rear of trailer * Yellow reflective tape on sides, extension, and rear in accordance with EU regulations * Brackets for warning signs with socket on both sides at the gooseneck and rear panel * TPMS tire pressure monitoring system per ECE R 141. Data transmission to the tractor unit via standardized EBS interface according to ISO 11992; for correct display, the tractor unit must support data transmission and display * Plug-in aluminum side walls and tailgate on gooseneck, approx. 2,440 x 400 mm (L x H); rear galvanized stakes are removable (body length approx. 2,560 mm) * Galvanized toolbox, integrated in gooseneck slope * 6 pairs of WADER container locks in loading platform, for 1 x 20' container, 2 x 20' containers or 1 x 40' container * Sliding mounting rails for aluminum ramps at rear of vehicle * 7 pairs of stake pockets for plug-in stakes approx. 100 x 50 mm, in the outer frame of the loading platform * Galvanized cross bracket under the loading platform * Galvanized extendable widenings, extendable approx. 230 mm per side * Lift axle on front axle, controlled via TEBS E according to current axle load and load status * 5 pairs of recessed lashing rings along the central beam (LC 5,000 daN)

Condition: ready for operation (used), SMW Autoblok SRG 2 FC grinding steady rest ID 224080 SN 1582130100,used, good condition, 100% working, scope of delivery as per photos Dkjdoxah D Ujpfx Ad Nel

Condition: used, maximum load weight: 33,100 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 04/2022, total width: 2,550 mm, total height: 3,780 mm, Equipment: ABS, Benalu Bulkliner S 95 51.5m3!!! RENT!!! !!! *? Empty weight 5900 kg * Axles Single tires * Coupling plates and kingpins Bolted steel coupling plate - Thickness 8 mm * Axles SAF axles - Disc brakes - * 1st lifting axle Control of the lifting axle * Tires 6 x 385 / 65 R 22.5 Bridgestone Regional * Aluminum rims Speedline satin finish * Automatic lowering during tipping * Boost pressure indicator Boost pressure indicator with pressure gauge 0-10 bar * Power and brake box Cable tray for electrical and pneumatic lines * Work lights in the middle and rear LED white work lights * Work lights / Number 4 * Tipping ram brand Hyva * Tilt angle (°) 48 * Tow coupling - * Tool box / Number 1 tool box * Aluminum smooth side walls - Double-walled longitudinal hollow chamber profiles - Vertical gradient Inner thickness 3mm at half height ? Internal length 9.50m - Internal usable height 2200mm * Inwardly bevelled top chord profiles Floor trough floor thickness 5mm * Internal usable width (mm) 2410 * Floor reinforcement struts - * Front wall 14° sloping front wall - thickness 4mm * Door universal door - double rod locks - foldable upper crossbar - 2 door wings - 1 grain slide with protective cover in each wing - rubber seal on the wings and on the rigid frame, door leaf type door leaf frame construction * Half locking bar - door lock pneumatic automatic release of the pendulum frame with 4 hooks * Upper door joint * Pendulum flap upper aluminum double hinge - removable - integrated in the side wall height * Grain slide right & left (aluminum) * Locking on the doors and grain slide * Hyfix HYFIX trough blocking device * Step ladder at the back Removable step ladder rear * Tarpaulin system Roll-up tarpaulin system - white transparent strip * Platform on the front wall Access on the right and left * Smartboard We are Benalu authorized dealers, we would be happy to make you an offer for your desired vehicle. Dkedpfx Aotpfn Ted Nel Subject to prior sale and errors!

Condition: used, volume flow: 7,500 m³/h, Oil mist extractor for CNC machines, Donaldson Torit brand filter separator. The unit is designed for filtration of oil mist (emulsions as well as pure oil), vapors and fumes generated by various metal cutting processes. Filtration efficiency reaches 99.97% Model: DMC-D2 Fan power: 7.5 kW Capacity: 7,500 m3/h Filtration area: 40.8 m2 Filter cartridges in very good condition. Stock no.: 1043 Dsdpfxoxd Ry Ho Ad Nskl

Condition: used, maximum load weight: 16,300 kg, overall weight: 22,000 kg, axle configuration: 1 axle, first registration: 08/2022, next inspection (TÜV): 09/2026, BPW 10t axles, frame construction made of high-strength Domex 700, total loading area 11,800mm, length of loading area 8,350mm, Knorr brake EBS 4s/2k (ASR), folding rear support legs 25,000kg, pneumatic valve for adjusting the N.4 wheel blockers, Electric winch with remote control, 3x2 lashing rings in the platform outer frame (8to), Aluminium frame L: 2,300mm - W: 500mm, hot-dip galvanized, Tool box, Loading platform rollers, Extendable bumper, Ramp bracket Dodpfx Adoih E Hys Njkl

Condition: used, functionality: fully functional, The 16-channel FT2M control system from MTS was in use until recently and is now for sale. All 16 system cables for 16 control channels—force, displacement, and servo valve—are included. Dksdpfxewv Uqio Ad Nel PC and system software are included. Equipment: 16 pcs: Dual Valve Driver Board 497.26 16 pcs: AC Amplifier Board AC Cond 497.13B 16 pcs: Dual DC Amplifier Board 497.22C 4 pcs: 497.01 Analog Chassis (19" rack) 4 pcs: Power supply +-15V/+5V 4 pcs: Station Control Card 497.34 4 pcs: RS232 Communication Card 497.36 1 pc: Hydraulic Control Panel 497.05 for 4 stations 1 pc: Global Resources III Card 498.71B 4 pcs: ADDA Card 498.65 2 pcs: PROC CPU 498.96-3

Condition: excellent (used), approx. 3000 m² steel construction platform 2-storey used, good condition, see pictures Manufacturer STOW Length approx. 58,5 m Width approx. 54,6 m height lower edge 3,4 m Height upper edge 3,7 m Load 500 kg/m² C-profiles and sigma-profile construction fixed with screws and nut Grid spacing adjustable in length floor structure is 38 mm chipboard, highly compressed, tongue and groove underside white, upper side grey coated Negotiated price: Offer on request! Dkodpfod S S E Uex Ad Nol Partial sale possible! Dismantled and loaded Goods are in stock. Transport costs are available on request. Visits possible at any time by appointment. Further information on request. Constantly over 5000 running meters of pallet racking from numerous manufacturers in stock. (Changes and errors in the technical data, information and prices and subject to prior sale! See our AGB, all prices excl. VAT from stock) Purchase / Sale We are constantly looking for and offering numerous articles from various areas clean-swept premises Liquidations Fast - flexible - ready to hit! We also clear and - or dispose for liquidators. Write to us with a few keywords and we will contact you immediately. To get to our site, please click on our logo!

Condition: like new (used), functionality: fully functional, UV roller painting line Barberan , DMC , Cefla , Burkle 1300 mm. Dodpfevcmi Ejx Ad Nskl Complete : 1. Barberan roller coater 2. Barberan roller coater reverse 3. UV 1 tube dryer 4. Barberan roller coater 5. UV 2 tube dryer 6. DMC grinding machine . 7. Brush machine . 8. Barberan roller coater 9. UV 2 tube dryer 10. Burkle roller coater 11. UV 2 tube dryer

Condition: used, Year of construction: 2009, Silo for sawdust in very good condition. Capacity: 280 m³. Dodex Av Rnepfx Ad Nekl

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 8675, This LSK157 packing machine of model 8675 is offered in excellent operation condition. The machine is fully functional. Dodpfx Ajt Aikzed Nekl Year of construction : 2003