Used Semi-Automatic Nut Packing Machine for sale (81,710)

Condition: ready for operation (used), Year of construction: 1993, 6 Stutznäcker single-needle lockstitch sewing automats are offered. Outside frame size X/Y: 1900mm/2600mm, max. stitch rate: 2600stitches/min, sewing type: lockstitch, sewing head/gantry: Mammut Class 750, linear unit X-axis: Hauser HLE 150 (installation position right), Y-axis traverse: ball screws/linear guide rails, control system: Hauser Comtac 2000. Equipment: Electronically synchronized separate drive for needle and hook, pneumatic presser foot lift, upper thread monitor, frame coding for safety monitoring, coated table plates as frame supports within the travel area, various frames, spare hooks, electrical cabinet on the right, operator panel on the right-hand side table and left-hand side table with pneumatically lowerable table top (max. 200mm) and surrounding support for the frame. Four sewing automats were retrofitted in 2007, two sewing automats in 2006. Dimensions X/Y: approx. 5000mm/7000mm, weight: approx. 2000kg. The machines are available from April 2027. Inspection possible by appointment. Lsdpfxjznx I Tj Amtshi

Condition: ready for operation (used), A fully automatic Schleuniger cable processing machine with two stations is available. Stations: 2, system: Cut-Strip-Terminate, conductor cross-section range: 0.15mm²-6mm², AWG range: 26-10, min. cable length: 60mm, max. cable length: 65000mm, max. feed rate: 12m/s, stripping length: 0mm-45mm, swivel movement range: 0°-90°, crimping force: 20kN. Machine dimensions X/Y/Z: approx. 3650mm/1850mm/1300mm, weight: approx. 900kg. Documentation available. An on-site inspection is possible. Lhjdpfx Amey Tn Nyetei

Condition: good (used), Parts shown by hand not come. Lsdpfezn U Nyex Amtshi VEMAG HP30E,2011. MULTIVAC R535, 2009.

Condition: good (used), Year of construction: 1998, functionality: fully functional, total length: 2,680 mm, total width: 2,350 mm, total height: 1,350 mm, type of input current: AC, overall weight: 1,800 kg, cutting range round steel at 45°: 300 mm, cutting range round steel at 90°: 325 mm, saw band length: 4,400 mm, saw band width: 34 mm, working height: 750 mm, cutting speed: 150 mm/min, height adjustment type: hydraulic, Technical data: Clamping range bundle tension: Width: 0 - 300 mm Height: 5 - 300 mm Material insertion: Single 0 - 600 mm Multiple 0 - 9999 mm Remaining piece length: Manual: approx. 70 mm Automatic: approx.: 300 mm Cutting speed: 15 to 150 m/min - AC drive Cutting pressure: infinitely variable hydraulic Lowering speed: 0 to 300 mm/min - infinitely variable Saw blade dimensions: 4400 x 34 x 1.1 mm Saw blade tension: With torque wrench Weight of the machine: approx. 1800 kg (net) Machine dimensions: Length x width x height approx. 2680 x 2350 x 1350 mm Max. Support weight: Material weight max. 250Kg/m Working height: 750 mm Lhedpeq Atyzsfx Amtsi With support elements approx. 800 mm (optional) Noise emission: 74 dB(A) Measured at the operator's workplace Including the two roller conveyors shown.

Year of construction: 2019, operating hours: 50 h, condition: excellent (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! System with only 50 operating hours! The new price was €280,000! Currently, the system is only partially operational, as it is not currently connected to the cooling system. TECHNICAL DETAILS Component types: Screws and bolts M8 and M10 Process: Automatic inductive hardening Throughput: approx. 70–80 parts/min MACHINE DETAILS Automation and feeding Feeding: Hopper belt Conveying technology: Inclined conveyor Sorting: Linear sorter Singulation: Automatic Indexing table: 8-position Nests per station: 2 Quenching medium: Water Quenching water tank: Present Discharge: Magnetic discharge belt Demagnetization: Present Quenching medium filtration: Cartridge filter Cooling: Prepared for connection to a central cooling system RF generator manufacturer: IDEA Heating power: 50 kW Power: 67.98 hp EQUIPMENT Hopper belt Inclined conveyor Linear sorter 8-position indexing table with 2 nests per station IDEA RF generator Quenching water tank Magnetic discharge belt Demagnetization unit Cartridge filter Temperature monitoring Lhodpfszmwcaox Amtoi Component height monitoring Component type monitoring Rotation monitoring Energy monitoring Ground fault monitoring Inductor flow monitoring Inductor water temperature monitoring

Condition: new, semi-automatic folder-gluer for 3-point and longitudinal seam gluing for minimum sheet sizes of 400x200mm and maximum sheet sizes of 1700x800mm Lsdperz Rmvefx Amtjhi Corrugated board quality up to 2 flute, also printed and laminated sheets

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, Rotary cup filling and sealing machine S version (PLC control) E version (extended basic frame) Approx. 2,500 cups per hour Filling volume: 10 ml - 2,000 ml Suitable for cups/buckets in the food and beauty sector (with or without a handle) 8 stations Lhedpszdzvfsfx Amtei Operations: - Cup destacking - Cup filling - Cup heat sealing - Cup capping

Condition: ready for operation (used), Trepko XPG 40 butter packing machine - Suitable for 100 gram and 250 gram butter blocks - Capacity: up to 80 packages per minute Lhodpjzibufefx Amtei Suitable for butter, margarine, lard, and cottage cheese Packaging in parchment paper or aluminum foil.

Condition: ready for operation (used), Year of construction: 2012, Twin lane tray sealer, up to 210 trays per minute. Handles MAP, high oxygen, skinpack and shrink film applications. Suitable for meat, poultry, fish, fresh and frozen meals, dairy products, and pet food. The twin lanes of the X-1100-Flex are independently controlled, allowing maintenance on one lane while the other line remains in production, for example. Ljdpfjyxgy Uex Amtshi

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, overall weight: 500 kg, See also homepage: bdtronic.com/de-de/heissnietanlagen/vollautomatisch-heissnieten/ Furthermore, there are other similar machines. Currently physically located at the subsidiary plant. Lhodpfey Nzhbjx Amtoi

Condition: good (used), Year of construction: 2006, A versatile 6 section clamping machine specifically designed for solid wood edge and face laminating. The Clamp Carrier is ideal for producing a variety of components such as panels, table tops, block gluings, joinery sections and stair parts. The patented 'equaliser' clamp arms incorporate a number of important features not found on other types of mechanical clamp that help ensure a quality glue joint is produced. As standard the machine is equipped with a hydraulic clamp tightener / loosener, pneumatic component flattener and hydraulic rotation. Equipped with: 302 type clamp arms with 915mm (36") max opening and 95mm ( 3.5") high jaws Lhsdporu Evgjfx Amtoi - 2 x 80S heavy duty hydraulic drives for rotation - 1 x 80V semi automatic hydraulic clamp tightener. (Hydraulic pack 3 phase electrics). - 1 x 80D pneumatic component flattener - Pneumatic movement in / out of front rest - CE safety perimeter guards Year - 2006 CE

Condition: used, Year of construction: 2020, operating hours: 1,500 h, functionality: fully functional, type of input current: AC, This Gruppo Fabbri ELEXA 24 Wrapping machine was manufactured in 2020 and purchased in 2021 from the UK agents Automac UK Ltd. It was used for approx 2 - 3 hours per day wrapping ready meals for 2 years. It is in excellent condition and has been stored ready to use since 2023. It has been decided that it is no longer required. The cost new was in excess of £20k. Collection is from Haydock, Lancashire UK and is available for inspection. There is 1 roll of film available. Lhsdpfx Amszhwg Ijtsi

Condition: good (used), Year of construction: 1982, Cutting capacity 90° round 320 mm square 320 x 320 mm rectangular 540 x 200 mm Cutting capacity 45° round 175 mm Ledpfx Amexztfaotohi square 175 x 175 mm rectangular 150 x 270 mm Main motor 1.5 kW Cutting speed, stepless 17 - 120 m/min Saw blade size 3660 x 27 x 0.9 mm Dimensions L x W x H 1900 x 1000 x 1200 mm Net weight 410 kg Accessories / Special Features: • Semi-automatic version • Raising and lowering of the saw frame • Hydraulic saw pressure regulation • Hydraulic material clamping • Automatic opening and closing of the clamping jaws • Cutting speed steplessly adjustable between 17 - 120 m/min • Automatic cutting pressure regulation • Material stop length 500 mm • Coolant system • Mitre swiveling device: The entire machine can be easily and quickly swiveled steplessly The workpiece clamping cylinder and the cutting pressure regulator have been newly resealed by us. Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: excellent (used), Year of construction: 2018, SBL 1060 SE Year: 2018 Sheet size (max.): 1060 x 760 mm Sheet size (min.): 350 x 400 mm Stamping size (max.): 1045 x 745 mm Gripper margin: 11 mm Platen pressure (max.): 300 tons Production speed: 8,000 sheets/hour Total power consumption: 20 kVA Elevated machine: 400 mm Sheet feeder: Manual non-stop pile feeder Material range: Paper and board from 470 x 350 mm to 1060 x 760 mm Max. cutting format: 1050 x 740 mm Min. sheet size: 470 x 350 mm Max. sheet size: 1060 x 760 mm Max. cutting pressure: 300 tons Material thickness: 0.1 – 2 mm (corrugated/laminated max. 4 mm) Min. gripper margin: 9.5 mm Max. inside chase size: 1155 x 852 mm Cutting plate size: 1076 x 756 mm Power consumption: Total 32 kW (22 kW + 10 kW for lower plate heating) Machine dimensions (L x W x H): 5,900 x 5,700 x 2,615 mm Max. pile height – feeder (with pallet): 1,750 mm Max. pile height – delivery (with pallet): 1,450 mm - Vacuum belt on feeder - Pneumatic feeder table - Non-stop manual feeder system - Anti-static system - Pre-pile device - Manual suction group adjustment - Micrometric suction adjustment - Motorized side pile adjustment - 2 pneumatic side register guides - Electronic control of front and side register Cutting/Embossing Section - Automatic pressure adjustment up to 300 tons - Preparation and introduction table for die frames in platen - Quick-lock die chase frames with bottom plate - Pneumatic locking of the chase and lower supporting plate - Centerline system - Micrometric system - Stripping Lodpfoznlbajx Amtjhi - Quick lock for upper and central stripper frames - Double accessory kit for lower stripper prep (pins, bars, clamps, etc.) - Delivery Section - High-pile automatic non-stop delivery with conveyor - Sheet deceleration device - Tab insertion device

Condition: good (used), Year of construction: 2001, TNK 36, year of manufacture 2001 including chip conveyor, Resy filtration system Ledpfexv Sr Isx Amtehi In good condition, operated without loader, not under power

Condition: new, Year of construction: 2026, Grinding machine for continuous operation in production, tool shops and renovation departments. The machine has a modern, sturdy design. Its headstock operates on two pairs of guides. Hydraulic feeds for 2 axes, by default comes with a digital display. Description Double V-shaped guide Hydraulic feed in 2 axes Tempered and precisely ground linear feeding guides Central lubrication of guides Digital display Sturdy design High machining accuracy Technical data Table dimensions 600×300 mm Maximum table feed 630×320 mm Distance from table surface to spindle axis 520 mm Table mounting T-slot 1×14 mm Table longitudinal speed 3–20 m/min Rapid vertical feed speed 360 mm/min Transverse travel equal to 1 grade on the vernier scale 0.01 mm Transverse travel equal to 1 wheel turn 2 mm Lhedpfokkcp Ejx Amtei Transverse feed addition 0–8 mm/min Transverse feed 600 mm/min Grinding wheel dimensions 300×30×76.2 mm Grinding wheel speed 2850 rpm Manual vertical travel equal to 1 grade on the vernier scale 0.01 mm Grinding accuracy 300:0.005 mm Grinding roughness Ra 0.32 Manual vertical travel for rotating 2 mm Main motor power 2.2 kW Flood coolant pump motor power 40 W Dimensions 1960×1480×1850 Weight 1400 kg Equipment dependent on the model Magnetic table Grinding wheel Grinding wheel fixture Cooling system Halogen lighting User manual EC declaration of conformity The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: new, Year of construction: 2026, Grinding machine for continuous operation in production, tool shops and renovation departments. The machine has a modern, sturdy design. Its headstock operates on two pairs of guides. Hydraulic feeds for 2 axes, by default comes with a digital display. Description Lsdpskkcm Uefx Amtshi Double V-shaped guide Hydraulic feed in 2 axes Tempered and precisely ground linear feeding guides Central lubrication of guides Digital display Sturdy design High machining accuracy Technical data TABLE DIMENSIONS 500 x 250 mm CROSS / LONGITUDINAL FEED 260 x 560 mm MAX. GRINDING SURFACE 540 x 240 mm MAX. DISTANCE FROM TABLE TO SPINDLE CENTERLINE 490 mm TABLE RUNNERS DOUBLE GUIDE CROSSWEEP PER 1 DIVISION OF NONIA SCALE 0.02 mm CROSSMOUNT PER 1 TURN OF THE WHEEL 2.5mm VERTICAL SHIFT PER 1 DIVISION OF NONIA SCALE 0.01 mm MANUAL VERTICAL FEED VOLUME PER ROTATION 1.25mm WHEEL DIMENSIONS 200 x 20 x 32 mm WHEEL ROTATION 2850 rpm MAIN MOTOR POWER 1.5 kW OIL TANK CAPACITY 80 L HYDRAULIC PUMP MOTOR POWER 1.5 kW ENGINE POWER FOR COOLANT PUMP 40 W DIMENSIONS 1800 x 1400 x 1800 mm WEIGHT 900 kg Optional equipment, dependent on the model (inquire with the sales rep) Magnetic table Chips separator with a magnetic filter Grinding wheel Grinding wheel fixture Cooling system Halogen lighting User manual EC declaration of conformity The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: refurbished (used), Divided into 30 parts Ledpfx Aett Am Ujmtjhi Weight range: 32-70 g/pc. Adjustable height of rounding space including 3 plastic rounding plates complete gearbox in oil bath 400V - 3 Ph - 50 Hz motor serial motor protection head opened for cleaning condition: very good (after general overhaul) Quantity of dough per tray (grams): 960-2100 Length x width x height (mm): 580 x 580 x 1350 Power (kW): approx. 0.74 Net weight (kg): 330

Condition: new, Year of construction: 2026, The KS 652 is a double-column, semi-automatic band saw designed as the ideal working tool for professionals who need to cut bars, pipes, profiles, and other metal structural elements — with the ability to cut at angles up to 60° to the left and right. Machine description: Band saws from the KS series are the only machines in their class that allow cutting both to the left and right — simply set and clamp the vise. Once the material is positioned, the operator can set the angle and rotate the bow without reopening the vise or repositioning the bar. The vise moves transversely along the worktable, ensuring quick access. The cutting frame structure, made of electro-welded tubular steel, guarantees high stability during cutting. Like all IMET band saws, the KS model is equipped with high blade tension (2000 kg/cm²) and a 6° inclined saw, which improves material feed, reduces load, and optimizes cutting even for large cross-sections and solid materials. A wide worktable provides full support for the material. The machine is highly user-friendly and easy to operate thanks to the automatic stop system in the 0°–60° left/right range and the angle scale on the table, making it easier to set the cutting position. To increase cutting precision, IMET band saws are equipped with a system for detecting angular deviation from the center. A mechanical material detection system ensures rapid approach to the material by automatically detecting the first contact point. The end of the cut is managed by a microswitch in the blade guide, ensuring precise blade alignment thanks to hardened rollers and auxiliary bearings. All operating parameters and settings are controlled via an independent, mobile console with LED indicators for blade tension, blade guard, motor overheating, and electrical voltage monitoring. The console allows setting of machine operating parameters such as band speed, lowering speed, and cycle end management (options include: bow return with stopped blade, bow return with moving blade, or cycle end without bow return). Cutting performance can be further increased by using a 4 kW motor, a hydraulic blade tensioner, and a high-tension hydraulic system (2200 kg/cm²). Technical parameters: Lhodpfx Ameyym I Ustsi Power supply: 3-phase 400V Total power: 3 kW Arm lowering control: Hydraulic with smooth adjustment Cutting speed: 15–100 m/min Vise base height: 844 mm Blade dimensions: 5320 × 34 × 1.1 mm Dimensions: 1895 × 2870 × 2300 mm Weight: 2100 kg

Condition: good (used), Year of construction: 2008, Eberhardt Piccolo 4 semi-automatic bun divider Lhsdpfx Aoznwlwsmtji - used - year of manufacture: 2008 - technical condition: good - weight range: 40-140 g - power supply: 400 V - 2 working trays - machine from production - price on request

Condition: new, Year of construction: 2023, REF: MM5675 Vigo semi-automatic T-capping machine. Suitable for applying T-caps to 70cl and 100cl bottles.  Manufacturer - Vigo Model - PG2010/TV SEMIAUTOMAT T-CAPPER.  Date of manufacture - 2023. Electric supply - 220 V / 50 hz / 1 phase. Supplied with manual, 1 x T stop corker adjustments for 2 x cap types (miniature and normal), 1 x Head and down channel for different “T” caps sizes and castors.  Lodpfxjr I Ddke Amtohi Purchased brand new in 2023 but never used.

Condition: good (used), functionality: fully functional, Hydraulic sharpening machine for band saws. Type Hydromat. Also ideal as a spare parts machine. Lhsdpszdkbkefx Amtoi

Condition: new, Carton erector Igluetech/Brunel Engineering Services RSE Lhodpevu Sriefx Amtji 4 units Price per unit

Condition: reconditioned (used), functionality: fully functional, Refurbished sharpening machine for carbide-tipped circular saw blades. Blade diameter up to 600 mm. Hydraulically controlled. Equipped with a cooling system, pump, and tank. Lhedpjzmhd Uofx Amtei

Condition: excellent (used), Year of construction: 2011, Fully automatic Rösler dual-stream cleaning system, automated with industrial robots, cleaning chambers with 2 blowers each, each with 2 loading/unloading containers, year of manufacture 2011, including a wet separator. Ljdezb Dqhspfx Amtjhi