Used Senfeng Sf1530G 4Kw Max 5G Laserquelle for sale (25,156)

Condition: new, maximum load weight: 48,930 kg, overall weight: 63,000 kg, axle configuration: > 3 axles, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available immediately and in the short term, on our website. Excerpt from the equipment list. Complete equipment list available upon request. Gooseneck * with beveled front corners, approximately 45° and with rear bevel approximately 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring, approximately 30 mm thick Loading platform * in a double-extendable design with rear bevel approximately 500 mm x 8° * 5 pairs of lashing rings, foldable outwards (LC 5,000 daN) * 4 pairs of lashing rings, foldable outwards (LC 10,000 daN) * 1 pair of lashing rings, horizontally at the front of the loading platform (LC 10,000 daN) * 1 intermediate table, approximately 250 mm * Recesses in the outer frame of the loading platform for attaching tension straps (LC 2,000 daN) * Hardwood flooring, approximately 48 mm thick, with diamond plate flooring over the axles Axles * BPW axles, hydro-mechanically forced steering * Technical axle load: 12,000 kg each * Air suspension with lifting and lowering valve Tires * 245/70 R 17.5 3PMSF, load index (146/146 F) * TPMS tire pressure monitoring system according to ECE R 141 Kingpin * JOST kingpins (mechanical) with a 2-speed gearbox for approximately 24 t lifting capacity (approximately 50 t test load) Braking system * according to EU regulations with EBS-E (4S3M) Laodpfezlwm Ajx Amtsd Steel structure * made of high-strength fine-grained steel * Steel grades: S355J2+N/S355MC (yield strength 355 MPa) * S690QL/S700MC (yield strength 690 MPa) Electrical system * according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) * All LED side marker lights flash with the turn signal * ASPÖCK-UNIBOX on the connection strip at the front with 24N, 24S & 15-pin sockets according to ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Painting * Complete steel structure automatically blasted after welding using a blasting wheel system * Second blasting with corundum for optimal adhesion of the coating system * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) to ensure the best corrosion protection * Final coating with 2 layers of 2K topcoat, solid color in RAL 3002 carmine red, according to the RAL 841GL system * Rims in silver. Rear part metallized and painted in RAL 9010 (pure white) * Metallic paint is not possible * Paint structure tested in the salt spray test according to ISO 9227-NSS * Sealing of cavities with special wax Including the following additional equipment 2 inch kingpin * Electro-hydraulic unit (± 45 kg) * Follow-up steering from the front and rear, controllable by means of a cable remote control via push buttons, with single-axle control (without installation in the central control unit) * One bracket for warning signs on the left and right of the gooseneck and on the rear panel, including socket * One bracket for a rotating beacon on the rear of the trailer * Aluminum side panels and rear panel on the gooseneck, pluggable, approximately 2,440 x 400 mm (L x H) * The rear galvanized stake pockets are removable. (Length of the superstructure approximately 2,560 mm) (± 46 kg) * A tool box, galvanized, integrated into the beveled gooseneck (± 47 kg) * 4 pairs of WADER container pockets in the loading platform for a 20', 2x 20', 40 or a 45' container (± 40 kg) * 7 pairs of stake pocket for stake pockets approximately 100 x 50 mm in the outer frame of the loading platform (± 21 kg) * Extensions, galvanized

Condition: new, maximum load weight: 33,865 kg, overall weight: 48,000 kg, axle configuration: 3 axles, Equipment: ABS, Excerpt of Equipment Gooseneck * with angled front corners approx. 45° and rear angle approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood decking approx. 30 mm thick Loading Platform * in double-extendable design with rear angle approx. 500 mm x 8° * 6 pairs of lashing rings that fold outwards (LC 5,000 daN) * 4 pairs of lashing rings that fold outwards (LC 10,000 daN) Lajdpfezlwm Nex Amted * 1 pair of lashing rings positioned horizontally at the front of the loading platform (LC 10,000 daN) * 1 intermediate table approx. 250 mm * Hardwood decking approx. 48 mm thick, with diamond plate decking over the axles * Cutouts in the outer frame of the loading platform for attaching tension straps (LC 2,000 daN) Axles * BPW axles and suspension, all axles with hydro-mechanical forced steering * Technical axle load: 12,000 kg each * Air suspension with lifting and lowering valve * Axle tool Tires * 245/70 R 17.5, load index (146/146 F) * Brand of our choice Kingpin * JOST kingpins (mechanical) with 2-speed gear for approx. 24 t lifting capacity (approx. 50 t test load) Braking System * in accordance with EU regulations with EBS-E (2S2M) without connecting lines to the semi-trailer tractor Painting * First-class and durable corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component (2K) zinc dust primer * A high-quality 2-component (2K) * Topcoat, single color in RAL 3002 carmine red * Rear section metallic and painted in RAL 9010 (pure white) * Metallic paint not possible Steel Construction * made of high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Electrical System * in accordance with EU regulations * Lighting 24 Volt ASPÖCK-NORDIK (ASS3) * ASPÖCK-UNIBOX on the front connection bar with sockets 24N, 24S & 15 pole * Connection according to ISO. 24N ISO-1185 24S ISO-3731 15 pole ISO-12098 Incl. the following additional equipment * 2-inch kingpin * One galvanized steel front panel, approx. 400 mm high * Yellow-red air couplings on the galvanized front connection bar * 4 wheel chocks with holder on the front panel (± 5kg) * A spare wheel holder in front of the front panel * Electro-hydraulic power unit (± 45kg) * Steering from the front and rear by means of cable remote control operated via push buttons, with single-axle control (without installation in the tractor unit) * Mounting at the rear of the gooseneck for aluminum loading ramps * European reflector plates (red-yellow) at the rear of the trailer * Yellow reflector tape in accordance with EU regulations on the side, on the extension and at the rear of the trailer * On the gooseneck and at the rear panel, one holder each on the left and right for warning signs including socket * Mounting rail for aluminum loading ramps at the rear of the vehicle * A holder for a rotating beacon at the rear of the trailer * Galvanized folding supports under the angle of the loading platform * A mud flap at the rear of the trailer * Manual and description on USB stick * Speed stickers 80 km/h at the rear and on both sides * Load gauge for determining the axle loads including load diagram.

Condition: used, mileage: 110,690 km, power: 368 kW (500.34 HP), first registration: 09/2022, fuel type: diesel, axle configuration: 4x2, wheelbase: 3,600 mm, next inspection (TÜV): 07/2027, brakes: intarder, color: silver, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, number of seats: 2, Year of construction: 2022, Equipment: ABS, air conditioning, cabin, central locking, cruise control, electronic stability program (ESP), hydraulics, navigation system, parking heater, power assisted steering, traction control, Other: * Nationwide delivery for €399 net plus VAT (€474.81 including VAT). Lasdpfxozluphe Amtsd * For all vans: On request, a 12 or 24-month Mercedes-Benz used car warranty is available. * We will gladly take back your current vehicle, offset it against the new vehicle, or pay you the purchase price. * Leasing / financing via Mercedes-Benz Bank. We will be happy to prepare an offer for you. * No liability for printing and typographical errors. * Subject to errors and prior sale.

Condition: used, mileage: 110,690 km, power: 368 kW (500.34 HP), first registration: 09/2022, fuel type: diesel, axle configuration: 4x2, wheelbase: 3,600 mm, next inspection (TÜV): 07/2027, brakes: intarder, color: silver, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, number of seats: 2, Year of construction: 2022, Equipment: ABS, air conditioning, cabin, central locking, cruise control, electronic stability program (ESP), hydraulics, navigation system, parking heater, power assisted steering, traction control, Other: * Nationwide delivery for €399 net plus VAT (€474.81 including VAT). Lasdpfezlupbsx Amted * For all vans: Upon request, a 12 or 24-month Mercedes-Benz used car warranty can be provided. * We will gladly take back your current vehicle, offset it against the new vehicle, or pay you the purchase price. * Leasing/financing options available through Mercedes-Benz Bank. We will gladly prepare an offer for you. * No liability for printing and typographical errors. * Errors and prior sale excepted.

Condition: used, functionality: fully functional, machine/vehicle number: NM0KCXTP6KNA90080, mileage: 278,509 km, power: 368 kW (500.34 HP), first registration: 02/2023, fuel type: diesel, empty load weight: 8,383 kg, maximum load weight: 9,617 kg, overall weight: 18,000 kg, tire size: 315/60 R 22,5 u. 295/60 R 22,5, axle configuration: 4x2, wheelbase: 3,600 mm, next inspection (TÜV): 04/2027, fuel: diesel, fuel tank capacity: 750 l, brakes: intarder, color: yellow, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, number of beds: 2, Year of construction: 2022, Equipment: ABS, AdBlue, EBS, air conditioning, central locking, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fog lights, fridge, hill-start assist, lane keeping assist, navigation system, onboard computer, parking air conditioner, parking heater, power assisted steering, power mirror, retarder, seat heater, second fuel tank, soot filter, spoiler, tachograph, tire pressure monitoring, traction control, Vehicle number #30860 Euro VI Long sleeper cab with 2 beds Intarder Wheelbase 3,600 mm Full air suspension Tires 315/60 R 22.5 and 295/60 R 22.5 400 + 350 liter tanks Aluminum rims Differential lock ZF Traxon automatic transmission Air conditioning Auxiliary heater Auxiliary air conditioning Cruise control Traction control Refrigerator Driver's air-suspended/heated seat Ford multimedia audio system Navigation system with touchscreen ACC adaptive cruise control Emergency braking assist Lane departure warning system Hill start assist Rear axle load indicator Max Cruise Level Eco-Roll ESP Air-suspended Aerodynamics package Diesel particulate filter Sun visor Central locking with remote control Rain sensor Electric windows (2-way) Electric/heated exterior mirrors Fog/work lights LED daytime running lights LED lighting Cornering lights Electric sunblind Laodey Sw Upjpfx Amtsd Blinds on left and right On-board computer Multifunction steering wheel Tire pressure monitoring system Rocking mode Voltage converter Storage cabinet Financing available upon request!

Condition: excellent (used), Year of construction: 2008, operating hours: 58,001 h, functionality: fully functional, machine/vehicle number: 170609, clamping force: 1,000 kN, screw diameter: 25 mm, clearance between the columns: 460 mm, displacement volume: 59 cm³, injection pressure: 2,000 bar, mold height (min.): 150 mm, ejector force: 25,000 N, ejector stroke: 100 mm, plate width: 600 mm, plate height: 650 mm, overall weight: 3,900 kg, Equipment: documentation/manual, ENGEL e-max 100 all-electric injection molding machine including GKU linear robot – cleanroom system – pharmaceutical – top condition You can find more top-condition ENGEL machines on our website: maschinen-handel.eu For sale is an ENGEL e-max 100 (Type E-MAX 200/100) in excellent technical and visual condition. The machine comes from the cleanroom production of a well-known pharmaceutical company in Lower Saxony and was used exclusively under the highest quality standards and regularly maintained. The entire system is in exceptionally well-maintained condition. The scope of delivery includes a GKU linear robot, including a separate robot base, which means the system can be used immediately for automated production processes. Technical data of the machine Manufacturer: ENGEL Type: E-MAX 200/100 Clamping force: 1000 kN (100 t) Lajdpfxjzl Iyms Amtjd Opening stroke: 350 mm Tie bar spacing: 460 × 410 mm Platen size: 650 × 600 mm Tool height: 150–450 mm Max. tool weight: 650 kg Ejection stroke: 100 mm Ejection force: 25 kN Drying cycle: 1.45 s Injection unit IS 200 Screw diameter: 25 mm L/D ratio: 25 Max. injection pressure: 2,400 bar Max. injection volume: 58.9 cm³ Shot weight (PS): approx. 54 g Injection speed: 108 cm³/s Dosing capacity: 10 g/s Heating capacity: 6.95 kW Heating zones: 4 Equipment ✔ All-electric ENGEL e-max ✔ GKU linear robot ✔ Separate robot base ✔ Cleanroom machine ✔ Suitable for use in the pharmaceutical industry ✔ Regularly maintained ✔ Very well-maintained overall condition ✔ Ready for immediate use Advantages The ENGEL e-max impresses with its high precision, energy efficiency, and dynamics. It is ideally suited for the production of high-quality plastic parts, especially in the following areas: Medical technology Pharmaceuticals Packaging Electronics Precision engineering Technical plastic parts Thanks to its origin in a cleanroom production environment, the machine was operated under particularly clean and controlled conditions. Inspection An inspection under power is possible at any time by appointment. We will gladly send you additional images, videos, and technical documentation upon request. More information on our website – Your specialist for used injection molding machines We will support you from inspection to transport to commissioning. If desired, we will organize dismantling, loading, Europe-wide transport, and export handling. e-max 100 t | Cleanroom | Pharmaceutical | All-electric | Top condition

Condition: good (used), Year of construction: 2003, functionality: fully functional, 1.High-Speed Planer/Moulder WACO MAXI 8 spindles for horizontal splitting, feed speed 20-150 m/min Working width planing: 30-300 mm Working height planing: 10-150 mm Cutting circle- 180-260 mm Operating voltage: - 400 Volts, 50 Cycles Main feed motor - 37 kW Frequency concerter - 45 kW 1.Bottom head - 24,5 kW 2.Top head - 30 kW 3.Right side head - 18,5 kW 4.Left side head - 30 kW 5.Right side head -18,5 kW 6.Left side head - 24,5 kW Horizontal splitting: Ljdpsy S R Agsfx Amtsad 7.Right side head - 53 kW 8.Left side head - 53 kW Max working width 200 mm Max working height 63 mm Max saw blade diameter 300 - 400 mm Spindle diameter 50 mm Vertical adjustability 10 mm Spindle speed 5.500 v/min Exhaust connection 2 x Æ 160 mm Unit lenght 1300 mm 2. High-Speed Planer/Moulder WACO MAXI 3 spindles for finishing, feed speed 30-300 m/min Main feed motor - 37 kW Frequency converter - 45 kW Feed speed, variable: 30-300 m/min 1.Beading head: 24,5 kW 2.Top head 24,5 kW 3.Rotaplan head 30 kW

Condition: new, maximum load weight: 46,800 kg, overall weight: 58,000 kg, axle configuration: > 3 axles, Equipment: ABS, You can find our complete vehicle inventory with vehicles available for immediate and short-term delivery on our website. Excerpt from the equipment list. Complete equipment list available upon request. Gooseneck * Gooseneck with beveled front corners at approximately 45° and a rear bevel of approximately 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring, approximately 30 mm thick Extendable platform * with rear bevel of approximately 1,000 mm x 8° * 5 pairs of lashing rings that fold outwards (LC 5,000 daN) * 3 pairs of lashing rings that fold outwards (LC 10,000 daN) * 1 pair of lashing rings, lying horizontally at the front of the platform (LC 10,000 daN) * Recesses in the outer frame of the platform for attaching tension straps (LC 2,000 daN) * Hardwood flooring, approximately 48 mm thick, with non-slip steel plate flooring over the axles Axles * BPW axles and suspension * 1st axle rigid, all other axles hydro-mechanically forced-steered * Technical axle load: 12,000 kg each * Air suspension with lifting and lowering valve * Axle tool kit * Tires * 245/70 R 17.5 3PMSF * Load index (146/146 F) * TPMS: TPMS tire pressure monitoring system according to ECE R 141 Kingpin * JOST kingpins (mechanical) with 2-speed gearbox for approximately 24 t lifting capacity (approximately 50 t test load) Braking system * in accordance with EU regulations with EBS-E (4S3M) Paint finish * Complete steel construction automatically blasted with a blasting wheel system after welding * Second blasting with corundum for optimal adhesion of the coating system Laodjzk S Dmepfx Amted * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum) to ensure the best corrosion protection * Final coating with 2 layers of 2K topcoat * solid color in RAL 3002 carmine red according to the RAL 841GL system * Rims in silver gray. Rear section metallized and painted in RAL 9010 (pure white) * Metallic paint not possible * Paint structure tested in the salt spray test according to ISO 9227-NSS * Sealing of cavities with special wax Steel construction * made of high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Electrical system * in accordance with EU regulations Lighting * 24 Volt ASPÖCK-NORDIK (ASS3) * All LED side marker lights flash with the turn signal * ASPÖCK-UNIBOX on the connection strip at the front with 24N, 24S & 15-pole sockets * Connection according to ISO. 24N ISO-1185 24S ISO-3731 15-pole ISO-12098 Incl. the following additional equipment * 2-inch kingpin * One galvanized steel front wall, approximately 400 mm high * Electro-hydraulic unit (± 45kg) * Steering from the front and rear via cable remote control, operated via push buttons, with single-axle steering (without installation in the central beam) * 1 pair of recessed lashing rings along the central beam at the rear in the bevel (LC 10,000 daN) (± 3kg) * On the gooseneck, aluminum side boards and rear wall, pluggable, approximately 2,440 x 400 mm (L x H) * The rear galvanized plug-in stakes are removable. (Length of the structure approximately 2,560 mm) (± 46kg) * A galvanized toolbox, integrated in the beveled gooseneck (± 47kg) * 3 pairs of WADER container pockets in the platform for a 20' (30?) or a 40? container (± 30kg) * 6 pairs of stake pockets for plug-in stakes, approximately 100 x 50 mm, in the outer frame of the platform (± 18kg) * Extensions, galvanized, extendable by app

Condition: new, Year of construction: 2024, Effective delivery rate approx. 1050 l/min Maximum pressure 10 bar Tank capacity 270 l Air outlet ½" Sales unit 1 Dimensions and weights Length approx. 1200 mm Width/Depth approx. 650 mm Height approx. 1540 mm Weight approx. 295 kg Electrical data Power consumption of electric motor 7.5 kW Connection voltage 400 V Phase(s) 3 phases Type of current AC Mains frequency 50 Hz Noise emission Lasdpfxofh Haho Amted Sound pressure level Lp 62 dB(A) Explanation of sound pressure level: Sound pressure level at a distance of 1 m according to DIN 45635 T 13 Motor(s) Motor type Electric Location: In stock at warehouse 54634 Bitburg - immediately available -

Condition: good (used), Year of construction: 2022, functionality: fully functional, We are offering our Kornit Atlas Max, built in March 2022, for sale. The machine is first-hand, has always been well-maintained, and regularly and professionally serviced under a maintenance contract. Machine details: • Model: Kornit Atlas Max • Year of manufacture: March 2022 • Location: Germany • First-hand • Regularly serviced (maintenance contract in place) • Very good condition - fully functional and ready for use • Excellent print quality and very high print speed Why are we selling the machine? We have expanded our production capacity and therefore no longer need the Kornit Atlas Max. We have always been very satisfied with the machine and can fully recommend its reliability and performance. Additional information: • The Kornit Atlas Max is ideal for producing high-quality textile prints in large quantities. • Perfect for companies specializing in on-demand production and custom print jobs. • The machine uses environmentally friendly, water-based inks and is OEKO-TEX certified. Included in delivery: • Kornit Atlas Max DTG printer • Maintenance records and documentation • Original accessories A viewing and demonstration of the machine is possible at any time by arrangement. You are also welcome to conduct a test print on-site to see the print quality for yourself. If you are interested, we look forward to hearing from you! An excellent offer for anyone looking for a powerful and reliable DTG printing machine! ----- We are offering our Kornit Atlas Max, manufactured in March 2022, for sale. The machine is first-hand, has been well-maintained, and has been regularly and professionally serviced under a maintenance contract. Lsdjv Sci Tspfx Amtsad Machine Details: • Model: Kornit Atlas Max • Year of Manufacture: March 2022 • Location: Germany • First-hand ownership • Regularly serviced (Maintenance contract available) • Excellent condition - fully functional and ready for immediate use • Outstanding print quality and very high print speed Why are we selling the machine? We have expanded our production capacity and therefore no longer require the Kornit Atlas Max. We have always been very satisfied with the machine and can highly recommend its reliability and performance. Additional information: • The Kornit Atlas Max is ideal for producing high-quality textile prints in large quantities. • Perfect for companies specializing in on-demand production and custom print orders. • The machine uses environmentally friendly, water-based inks and is OEKO-TEX certified. Included in the sale: • Kornit Atlas Max DTG Printer • Maintenance documentation and records • Original accessories Inspection and demonstration: An inspection and demonstration of the machine can be arranged at any time by appointment. We are also happy to perform a test print on-site to demonstrate the excellent print quality. Price and Contact: If you are interested, we look forward to hearing from you! A fantastic opportunity for anyone looking for a powerful and reliable DTG printing machine!

Condition: used, maximum load weight: 25,630 kg, overall weight: 38,000 kg, axle configuration: 2 axles, first registration: 11/2024, next inspection (TÜV): 11/2026, Equipment: ABS,

Condition: used, maximum load weight: 47,300 kg, overall weight: 58,000 kg, axle configuration: > 3 axles, first registration: 03/2025, next inspection (TÜV): 03/2026, Equipment: ABS, Excerpt from the equipment list. Complete equipment available upon request. Lsdpjzkx Husfx Amtoad Gooseneck: - with angled front corners at approximately 45° and rear taper of approximately 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Hardwood flooring, approximately 30 mm thick Loading platform: - in extendable design with rear taper of approximately 1,000 mm x 8° - 5 pairs of lashing rings that fold outwards (LC 5,000 daN) - 3 pairs of lashing rings that fold outwards (LC 10,000 daN) - 1 pair of lashing rings lying flat at the front of the loading platform (LC 10,000 daN) - Cutouts in the outer frame of the loading platform for attaching lashing straps (LC 2,000 daN) - Hardwood flooring, approximately 48 mm thick - Diamond plate flooring over the axles Kingpin supports: - JOST kingpin supports (mechanical) with 2-speed gearbox for 24t lifting capacity (50t test load) Tires: - 235/75 R 17.5 3PMSF Axles: - BPW axles, two fixed axles, two steered axles, air-sprung - with drum brakes with lifting/lowering function - The steered axles with electro-magnetic reverse lock can be activated via reverse gear or manually Braking system: - WABCO braking system in accordance with EU regulations with EBS-E (4S3M) without connecting lines to the tractor unit Paintwork: - High-quality 2-component (2K) topcoat in a single color, RAL 3002 carmine red Accessories: - One spare wheel holder in front of the front wall (without spare wheel) - 2-inch kingpin - One galvanized steel front wall, approximately 400 mm high - Yellow-red air couplings on the galvanized connection strip at the front - 4 wheel chocks with holder on the front wall - Mount at the rear of the gooseneck for aluminum loading ramps - Galvanized folding supports under the taper of the loading platform - One holder for a rotating beacon at the rear of the trailer - Yellow reflector tape in accordance with EU regulations on the side, on the extension, and at the rear of the trailer - One holder for warning signs on the left and right sides of the gooseneck and rear panel, including socket - Load scale to determine axle loads, including load diagram Includes special accessories: - Aluminum side and rear walls on the gooseneck, pluggable, approximately 2,440 x 400 mm (L x H) - One galvanized toolbox, integrated in the tapered gooseneck - 3 pairs of WADER container pockets in the loading platform for a 20' (30') or a 40' container - Adjustable mounting rails for aluminum loading ramps at the rear of the vehicle - 6 pairs of stake pockets for pluggable stakes, approximately 100 x 50 mm in the outer frame of the loading platform - Extensions, galvanized, extendable by approximately 230 mm on each side - Lift axle on the front axle with control via TEBS E - 2 LED reversing lights mounted on the rear panel - 2 pairs of ferry rings under the gooseneck and 2 pairs at the rear - An acoustic warning signal when reversing - HRM metallization (High Resistance Metallization)

Condition: new, power: 375.1 kW (509.99 HP), fuel type: diesel, tire size: 315/70R22.5, axle configuration: 4x2, wheelbase: 3,750 mm, color: blue, gearing type: automatic, suspension: air, Year of construction: 2025, Equipment: ABS, AdBlue, Android Auto, Apple CarPlay, Bluetooth, EBS, USB port, air conditioning, blind spot assist, central locking, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fog lights, lane keeping assist, navigation system, non-smoking vehicle, onboard computer, parking air conditioner, parking heater, power assisted steering, power mirror, retarder, seat heater, second fuel tank, tachograph, tire pressure monitoring, truck registration, ADR hazardous goods equipment (EX.II / FL / AT) F-MAX L 3,750 mm wheelbase Air-suspended front axle 8.0 t 4-bellows air suspension on rear axle Alloy wheels Michelin tires Double PTO with flange at bottom Voith retarder Roof air conditioning unit Heated windscreen LED headlights RAL5010 Air horn Sun visor Technology package 5 Without spoiler Tank configuration upon agreement (600L right + 450L left or single tank of your choice) 3-year full vehicle warranty Ledpfxjylnazo Amtjad Available at short notice

Condition: used, mileage: 56,000 km, power: 180 kW (244.73 HP), fuel type: diesel, axle configuration: 4x2, fuel: diesel, color: white, gearing type: automatic, emission class: euro6, loading space length: 4,450 mm, loading space width: 2,490 mm, loading space height: 2,400 mm, Year of construction: 2020, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, navigation system, spoiler, tail-lift, Year of manufacture: 2020 Front axle: Steering; Tyre profile left: 50%; Tyre profile right: 50% Rear axle: Double wheels; Tyre profile left inner: 50%; Tyre profile left outer: 50%; Tyre profile right outer: 50%; Tyre profile right outer: 50% Empty weight: 4.580 kg Carrying capacity: 4.070 kg GVW: 9.108 kg Tail lift: Palfinger, tail lift, 1500 kg Make of bodywork: Thermoking V 500 MAX Cooling engine: diesel and electric Laodpfx Aezava Ssmtsd = Additional options and accessories = - 3 Seats - Airbag - Camerasystem 360° - LED- lighting - Reversing camera - Roof spoiler

Condition: new, Year of construction: 2023, laser power: 4,000 W, We have been trading YAWEI fiber laser machines for over 7 years. We take care of the entire service. All you need is gas and electricity, we take care of the rest. We have already installed 300+ fiber lasers from YAWEI across Europe. Here we offer a new stock machine YAWEI fiber laser machine type HLF1530. Power: 4kW Lasdsqgcthjpfx Amtod FE up to 20mm / VA up to 15mm / CU up to 6mm Sheet format: 3000 x 1500mm automatic changing table with light barriers Precitec Auto Focus Procutter cutting head MAX Photonics resonator with 4kW and German on-site guarantee Siemens DsL touchscreen control with LAN/USB Siemens drives THK tours Small parts conveyor belt Ball transfer table for scratch-free and easy sheet metal handling 24 month guarantee CAD/CAM software Installation Delivery (within Germany) training CE certification The machine is a stock machine. An identically constructed one can be tested under power at any time Give us a call !

Condition: new, Year of construction: 2025, HW 1.5kW is a high-performance, compact fiber laser welding machine designed for maximum efficiency and precision. Technical Specifications: Laser Source Power: 1.5 kW (MAX Laser Source) Welding Speed: 0 - 120 mm/s Welding Spot Adjustment: 0 – 5 mm (Spiral Wobble function) Wire Feeding: Automatic system included Fiber Cable Length: 15 meters Power Supply: 220V / 380V Dimensions: 1,000 x 630 x 910 mm Weight: 230 kg Certification: CE Laedpfjzkkaysx Amtsd Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania.

Condition: used, mileage: 48,637 km, power: 130 kW (176.75 HP), color: white, gearing type: automatic, loading space length: 57,200 mm, loading space width: 24,900 mm, loading space height: 22,000 mm, Year of construction: 2023, Equipment: ABS, air conditioning, power assisted steering, For inquiries regarding the vehicle, please contact Mr. Seidel (tel. number provided). Mercedes-Benz Atego 818 L refrigerated box truck with tail lift Tail lift: Dautel DL 1000 L (1,000 kg) Refrigeration unit: ThermoKing V-600 Max Temperature recorder A1M front axle, 4.1 t A2B rear axle, crown wheel 325, hypoid, 6.2 t A2Z rear axle differential lock A5L axle ratio i = 3.417 B1B electronic braking system with ABS and ASR B1C electronic compressed air system unit, low B1F heater, electronic compressed air system unit B2A disc brake, on front and rear axle B4A condensate monitoring, for compressed air system C2J wheelbase 4220 mm C5I fastening parts, for platform body C6A steering ZF 8090 C6Y stabilizer, under frame, rear axle C7M protective device, lateral, weight-optimized C9Y omission of rear underrun protection (ECE) D1C driver's air-suspended seat, comfort D1M passenger's fixed seat, simple D2V armrests, on both sides, driver's seat D2Y seatbelt warning D3Q seat cover, velour D4B classic cockpit D4W power windows, on both sides D5Y rubber floor mats, driver and passenger side D6F air conditioning D6Y pollen filter D7L storage compartment, above windshield, 1 compartment D8A sunroof/ventilation flap, roof E0F batteries from Exide E0Y battery cover E1H batteries, 2 x 12 V/165 Ah, maintenance-free E1N generator 28 V/100 A E4C additional functions, for body manufacturer E5A switch no. 1 for external body electrical system E6Z reversing warning E7F cable remote control for air suspension E9H preparation for tail lift control F1X S-cab ClassicSpace, 2.30 m, tunnel F5L exterior sun visor, transparent F6I front mirror, heated F6J main mirror, electric, driver's side F7W cab entrance, single-step F8E locking system, with central locking Lsdpfszlbagjx Amtsad F8F comfort locking system F8V light sensor F8W rain sensor F9A preparation, cab parts, body width 2600 mm G0K driving program economy/power G1D transmission G 90-6/6.70-0.73 G5G Mercedes PowerShift 3 I0E tires tubeless, 215/75 R 17.5 front axle/front drive axle I4A wheel formula 4x2 I5Q 7.5-tonner I6A platform chassis I6X air suspension, rear axle J1H instrument cluster, 12.7 cm J1O tachograph digital, 2nd generation, ADR J1S tachograph manufacturer VDO J3N Fleetboard Eco Support J3V Truck Data Center 7 J4X seatbelt warning, with seat occupancy recognition, passenger side J5S radio, with USB connection and Bluetooth J8Y preparation for Truck Data Center 7 J9D preparation for toll collection K0E plastic tank 120 l, left K3T AdBlue tank 25 l K5M tanks, lockable K5S protective cap for AdBlue dosing system K7I exhaust system, on the frame, right, tailpipe inwards L0A lighting regulations, according to UN-R 48.06 L0Y taillight cable set, extended L1B daytime running lights L2H side marker lights, flashing L9D preparation, additional turn signals M0S noise encapsulation, according to ECE M1I engine OM934, R4, 5.1 l, 130 kW (177 hp), 750 Nm M4X engine version Euro VI, E M5V High Performance Engine Brake M8Z fuel preheating O1N Off-Line FHS attachments O1X integration of CLCS TL function in ASAM P0L tail lift preparation, Atego Q1C front spring 3.4 t, parabolic R0Z wheel nut cover R1A steep shoulder rims 6.00 x 17.5 S1D stability control assistant (ESP) S1H lane keeping assistant S1P Active Brake Assist S5A speed limiter 90 km/h / 56 mph, ECE S5Z cruise control T0G weight variant 7.49 t (3.4/4.6) Z4D inline engine, 4 cylinders Loading space dimensions: L 5.720mm W 2.490mm H 2.200mm Tire profile: 1st axle...

Condition: used, mileage: 108,050 km, power: 120 kW (163.15 HP), first registration: 01/2020, fuel type: diesel, overall weight: 5,000 kg, color: black, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 6,946 mm, total width: 2,135 mm, total height: 2,451 mm, loading space length: 4,200 mm, loading space width: 2,300 mm, loading space height: 2,100 mm, Equipment: ABS, central locking, electronic stability program (ESP), soot filter, tail-lift, Internal vehicle number: 8969 ----Why autonext? Over 400 cars and commercial vehicles immediately available. One of the largest vehicle exhibitions in the region. Over 1,000 satisfied customers annually - top customer ratings. Attractive financing and trade-in options available. Complete vehicle range available at autonext. Mobility made easy. WhatsApp chat: ### Offer: Financing from 4.99% ### ----Good and well-maintained condition 1st owner, German vehicle, non-smoking vehicle Complete service history, exclusively serviced at Mercedes-Benz Next service in 365 days Rearview camera Body: Insulated box van Standby cooling + engine cooling ThermoKing cooling unit V200 MAX model 50 Refrigerant: R-404A / R-452A Optionally, we offer a cooling maintenance service from the manufacturer for only €899. Hydraulic tail lift "Bär" (750 kg) Partition in the cargo area Portal doors Side door Rear entry aid ---- Special equipment: * Multimedia system MBUX (7" touchscreen) * Bluetooth hands-free system * Multifunction steering wheel * 1 DIN slot in front under the headliner * 2nd battery (auxiliary battery) inside * Passenger-optimized center console (without storage compartment on the right) * Suspension: Stabilization level II * Folding cover for storage compartment * Terminal block for electrical connections (driver's seat box) * Fuel filter with water separator * Radiator grille frame in vehicle color * Front power take-off with bracket for additional coolant compressor * Windshield wipers with rain sensor * Front mud flaps * Seats in the cab: Double passenger seat * Seats in the cab: Comfort suspension seat, driver's side * Separate relay for additional battery * Rear wall lining Lasdpfx Amsw Eg E Djtsd * Fleece battery 92 Ah Standard equipment: Storage compartment above the windshield, storage compartment below the dashboard on the passenger side, towing eye at the rear, adaptive brake light, driver's airbag, anti-lock braking system (ABS), traction control system (ASR), drive type: rear-wheel drive, display for windshield washer fluid level, exterior mirrors electrically adjustable and heated, both sides, exterior temperature display, roof lining in the cab, automatic headlight activation, electronic brake force distribution (EBV), electronic stability program (ESP), driver assistance system: active brake assist, driver assistance system: crosswind assist, driver assistance system: lane keeping assist, digital tachograph, downloadable, electric windows 2-fold, 6-speed transmission - TSG (Eco Gear), body/structure: flatbed, keyless start, communication module (LTE) for digital services, fuel tank: main tank 71 liters, steering wheel (steering column mechanically adjustable), headlight range adjustment, truck registration, side marker lights, Mercedes-Benz emergency call system, engine 2.1 liters - 120 kW CDI CAT, particulate filter, wheelbase 4325 mm, low emissions according to Euro 6 emission standard, safety belt system with warning system (driver's side), seat cover / upholstery: fabric, seats in the cab: driver's seat with armrest, start/stop system, daytime running lights, underrun protection at the rear, preparation for DAB radio reception, service interval display Assyst, immobilizer, heat-protective glazing (windshield with band filter at the top), central locking with remote control, permissible total weight 5.00 t. ----Inspection/emission test can be done upon request. ----Warranty and "TÜV Profi Check" are of course available! We will also gladly take your v

Condition: used, mileage: 109,050 km, power: 125 kW (169.95 HP), first registration: 01/2023, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: automatic, emission class: euro6, number of seats: 3, total length: 6,046 mm, total width: 2,035 mm, total height: 2,293 mm, loading space length: 3,400 mm, loading space width: 1,850 mm, loading space height: 1,900 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Internal vehicle number: 4697 ----Why autonext? Over 400 cars and commercial vehicles immediately available. One of the largest vehicle showrooms in the region. Over 1,000 satisfied customers annually - top customer ratings. Attractive financing and trade-in options available. Full range of vehicles available at autonext. Mobility made easy. WhatsApp Chat: ### Offer: Financing from 4.99% ### ----Excellent condition! 1st owner, German vehicle, non-smoking vehicle Complete service history, only serviced at Mercedes-Benz Next service in 644 days New brake pads front and rear Automatic transmission Body type: Refrigerated box van Thermo King V500 MAX (-20°Celsius) Refrigerant R-404A Standby cooling + engine cooling Lsdoyg T Rhspfx Amtsad Optionally, we offer a cooling maintenance service from the manufacturer for only €899. Multimedia system MBUX (7" touchscreen) Navigation system for multimedia system MBUX Speed limiter (cruise control) Active lane keeping assist Traffic sign recognition Attention Assist (driver fatigue detection) Inductive charging cradle for smartphone (wireless charging) Controlled air conditioning (Tempmatik) Instrument cluster with color display Comfort driver's seat Rear portal doors ---- Special equipment: * Multimedia system MBUX (7" touchscreen) * Bluetooth hands-free system * Multifunction steering wheel * 1 DIN slot in front under the headliner * 2nd battery (auxiliary battery) inside * 3-button remote control for central locking * Acoustic package * Trailer socket 13-pin * Armrest, driver and passenger door * Battery disconnect switch 1-pole * DAB tuner (digital radio reception) * Driver assistance system: Active lane keeping assist * Driver assistance system: Attention Assist (driver fatigue detection) * Driver assistance system: Traffic sign recognition * Suspension: Stabilization level II * Parking brake, electric * All-weather floor mats * Generator 250 A * Speed limiter (cruise control) * Cup holders in front * Grab handle passenger double seat (inside seat) * Grab handles A-pillars * Additional main key * Inductive charging cradle for smartphone (wireless charging) * Folding cover for storage compartment * Folding cover for storage compartments left/right * Connection strip for electrical connections (driver's seat box) * Controlled air conditioning (Tempmatik) * Instrument cluster with color display * Fuel tank: Main tank 93 liters * Charging package dashboard (USB connections and 12V socket additionally) * Front PTO with bracket for additional refrigerant compressor * Navigation system for multimedia system MBUX * Fog lights with cornering lights * Wheel arch covers * Smoker's package * Spare wheel with road tires * Spare wheel carrier under the end of the frame incl. jack * Windshield wiper with rain sensor * Mud flaps in front * Safety belt system with warning system (passenger side) * Seat equipment: Comfort headrest, driver's seat * Seats in the cab: Passenger double seat * Seats in the cab: Comfort driver's seat * Seats in the cab: Driver's seat with lumbar support * Lockable storage compartment in storage above the windshield * Socket (12V connection) in the cab * Fuel filler cap red * Separation relay for battery additionally * Underrun protection rear * USB connection in the center under the dashboard (charging function only) * Trim

Condition: used, mileage: 257,050 km, power: 120 kW (163.15 HP), first registration: 07/2021, fuel type: diesel, overall weight: 5,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 6,850 mm, total height: 3,250 mm, loading space length: 4,200 mm, loading space width: 2,050 mm, loading space height: 2,200 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, tail-lift, Internal vehicle number: 7355B ----Why autonext? Over 400 immediately available cars & commercial vehicles. One of the largest vehicle showrooms in the region. Over 1,000 satisfied customers annually - top customer ratings. Attractive financing & trade-in options available. Complete vehicle selection on autonext - Mobility made easy. WhatsApp chat: ### Offer: Financing from 4.99% ### ----Good, well-maintained condition. 1st owner, German vehicle, non-smoking vehicle. Complete and consistent service history, exclusively at Mercedes-Benz. Body: Maxi refrigerated box van ThermoKing V500 MAX refrigeration unit Refrigerant R-404A / R-452A Standby cooling + engine cooling Optionally, we offer you a refrigeration service from the manufacturer for only 899,- Euro. Hydraulic tailgate (750 kg) Payload 2,030 kg Permissible total weight 5,500 kg Loading area: Length 4.20m / Height 2.20m / Width 2.05m Lsdexdm Dzspfx Amtoad Rearview camera Navigation system Regulated air conditioning (Tempmatik) ---- Special features: * MBUX multimedia system (7" touchscreen) * Bluetooth hands-free system * Multifunction steering wheel * 1 DIN slot in front under the dashboard, passenger side * 2nd battery (auxiliary battery) interior * Acoustic package * Exhaust pipe in front of the rear axle, left * Extended exterior mirror base, left/right * Battery disconnect switch, 1-pole * DAB tuner (digital radio reception) * Vehicle without start/stop system * Generator 250 A * Speed limiter 90 km/h * Connection strip for electrical connections (driver's seat box) * Regulated air conditioning (Tempmatik) * Fuel filter with water separator * Front engine drive with carrier for additional coolant compressor * Navigation system for MBUX multimedia system * Seats in the driver's cab: Double passenger seat * Separation relay for additional battery * Reinforced front axle Standard features: Storage compartment above the windshield, Adaptive brake lights, Airbag driver side, Anti-lock braking system (ABS), Anti-slip regulation (ASR), Drive type: Rear-wheel drive, Display for windshield washer fluid level, Exterior mirrors electrically adjustable and heated, both, Exterior temperature display, Roof lining in the driver's cab, Automatic activation for driving lights, Electronic brake force distribution (EBV), Electronic stability program (ESP), Driving assistance system: Active brake assist, Driving assistance system: Crosswind assist, Driving assistance system: Lane keeping assist, Digital tachograph, Suspension: Stabilization Level II, Electric window lift 2-fold, Gearbox 6-speed - TSG (Eco Gear), Body/structure: Standard platform body, Keyless start, Communication module (LTE) for digital services, Fuel tank: Main tank 71 liters, Steering wheel (steering column mechanically adjustable), Headlight range adjustment, Truck registration, Side marker lights, Mercedes-Benz emergency call system, Engine 2.1 liters - 120 kW CDI CAT, Particle filter, Wheelbase 4325 mm, Low emissions according to emissions standard Euro 6, Safety belt system with warning system (driver's side), Seat cover / upholstery: Fabric, Seats in the driver's cab: Driver's seat with armrest, Seats in the driver's cab: Driver's seat adjustable, Daytime running lights, Underrun protection rear, Fleece battery 92 Ah, Maintenance interval display Assyst, Immobilizer, Heat-insulating glazing (windshield with band filter at the top), Central locking with remote control, Permissible total weight 5.00 t. ----MOT/technical inspection upon request

Condition: used, Year of construction: 1997, Second-hand machine Year of manufacture: 1997 Condition: workshop-inspected Fittings drilling head Drilling unit: 3/4 spindles Clamping cylinders: 2 Motor power: 0.8 kW Connection: 400/50 volts / Hz Machine dimensions Length 950 mm Width 650 mm Height 700 mm Laodpjzk Nu Aofx Amtjd Weight: 80 kg Availability: at short notice Location: Röllbach

Year of construction: 2022, condition: used, Second-hand machine Ljdpfx Amszk Nrzstjad Year of manufacture: 2022 Condition: as new, very few operating hours, not used in production Features and technical specifications: - Compact screw compressor with variable speed control and innovative LOGIN control system - With tank and refrigerated dryer - Maximum pressure: 10 bar - Effective delivery rate: 1,050 l/min - Motor power: 7.5 kW - Noise level: 62 dB(A) - Connection: 1/2 - Tank capacity: 270 litres (AD2000) - Frequency-controlled - Electronic control - Oil heat exchanger - Compressed air receiver, hot-dip galvanised inside and out - Drive transmission: Direct coupling - Starting method: Star-delta - Compliant with AD 2000: yes Dimensions: 1,200 × 650 × 1,540 mm Weight: 295 kg Availability: at short notice Storage location: Röllbach

Condition: new, functionality: fully functional, Year of construction: 2025, Laser source - MAX Photonics 20kW Table size - 3000x1500mm Control system - FSCUT 6000 Software - Cypnest+Cypcut Laser head - Boci BLT442 autofocus head Ledpownpztsfx Amtoad Nitrogen proportional valve - SMC Power stabilizer - 120kVA Water chiller - Hanli Load capacity up to 5760kg X/Y positioning accuracy - ±0.05 mm/m X/Y repeatable positioning accuracy - ±0.03 mm/m Maximum traverse speed - 120 m/min Maximum acceleration - 1.5 G CNC control - FSCUT 6000 Power supply - 380V 50Hz three-phase

Condition: new, functionality: fully functional, Year of construction: 2025, Laser source - MAX Photonics Table size - 3000x1500mm Control - FSCUT 6000 Software - Cypnest+Cypcut Laser head - Boci BLT442 autofocus head Nitrogen proportional valve - SMC Power stabilizer - 120kVA Water chiller - Hanli Load capacity up to 5760kg Laser power - 12,000 W X/Y positioning accuracy - ±0.05 mm/m X/Y repeat positioning accuracy - ±0.03 mm/m Maximum traverse speed - 120 m/min Maximum acceleration - 1.5 G CNC control - FSCUT 6000 Lajdpfxewnpmco Amtsd Power supply - 380V 50Hz three-phase

Condition: new, functionality: fully functional, Year of construction: 2025, Laser source - MAX Photonics Table size - 4000x2000mm Control system - FSCUT 6000 Software - Cypnest+Cypcut Laser head - Boci BLT442 Nitrogen proportional valve - SMC Power stabilizer - 120kVA Water cooler - Hanli Load capacity up to 3200kg Laser power - 12000 W X/Y positioning accuracy - ±0.05 mm/m X/Y repeat positioning accuracy - ±0.03 mm/m Maximum travel speed - 120 m/min Maximum acceleration - 1.5 G CNC control - FSCUT 6000 EtherCAT-BUS Lsdpfx Aewnqbzjmtjad Power supply - 380V 50Hz three-phase