Used Sicmea Cometa 12.5 for sale (337)

Condition: used, Year of construction: 2010, Lot consists of: Fpodpfx Adsym Tx Ss Njg (1) Compressor Technical Details: Motor: 5,500V 108A 900kW, weight 4.6 t /// Compressor: 7,500 m³/h, 6 bar. LxWxH 4.5x3.3x2.2 m, weight 12.5 t

Condition: new, Year of construction: 2026, functionality: fully functional, power: 88 kW (119.65 HP), temperature: 220 °C, heating capacity: 30 kW (40.79 HP), workpiece height (max.): 1,500 mm, workpiece length (max.): 500 mm, insulation material: Steinwolle, insulation thickness: 150 mm, workpiece width (max.): 500 mm, Scope of delivery: 1. chemical pre-treatment by spraying (in cycle process) 2. dryer 3. powder coating system 4. single powder oven 5. conveyor technology, semi-automatic 6. electrical control system Hall/ floor space Floor area of the system max. 12,000 x 6,500 mm Hall floor Industrial floor Workpiece sizes Max. Part dimensions L= 500mm, H= 1,500mm, W= 500mm Range of steel parts Conveyor technology P&F chain conveyor in cycle mode, semi-automatic Pre-treatment Chemical Power supply Electricity On-site power (max. 88 kW) Gas On-site power Compressed air On-site power Water On-site power Calculation Type of system Cycle system Conveying speed 3.2 meters / min Length per cycle L = 1,600 mm Time for cycle movement: Tm = 1.6 meters : 3.2 meters/min = 0.5 minute Fedpfxsulwg Nj Ad Nopg Time for cycle standstill: Ts = 8.5-12 minutes Total time for cycle Tt = Tm + Ts = 9-12.5 min Electrical energy: Total power 88 kW min. Average consumption 60 kWh max. average consumption 70 kWh

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 20225202986, overall weight: 50 kg, load capacity: 12 kg, arm reach: 1,300 mm, pivoting range: 360 °, Equipment: documentation/manual, TECHNICAL DETAILS Load capacity: 12.5 kg Arm reach: 1,300 mm Swivel range: 360° MACHINE DETAILS Control cabinet width: 500 mm Control cabinet height: 500 mm Input voltage: 240 V Input current: 8 A Type of input current: Alternating current (AC) Total weight: 50 kg EQUIPMENT Manual Controller Teach pendant Fedey D I Ikspfx Ad Nspg Original packaging and documentation

Condition: used, Year of construction: 1984, Used machine Year of manufacture: 1984 Condition: fully checked and serviced Equipment and technical data: - Incl. combination unit with contact roller and sanding pad - With height-adjustable contact roller for calibration - With air cushion pressure shoe controlled by the workpiece - 4-way adjustable grit compensation - With pneumatic belt tensioning device - With rotating structuring brush at the machine's outfeed side - Sanding width: 1350 mm - Sanding belt length: 1900 mm - Pass-through height: 150 mm Fpodpfow R Hh Ujx Ad Neg - Main motor: 15 kW - Feed speed steplessly adjustable 2.5 - 12.5 m/min - With roller table at the infeed - With separate additional structuring brush - With roller table at the outfeed - With digital display unit for the electromotoric workpiece thickness setting - With automatic workpiece thickness adjustment - Extraction ports: 2 x 200 mm - Feed belt is ok; has a defect in one spot (see photo) Dimensions: approx. 2300 x 2000 x 2300 mm Weight approx.: 2500 kg Pictures show the machine in unchecked condition! Availability: short-term Location: Röllbach

Condition: used, Year of construction: 2001, machine/vehicle number: IntNr231491, Manufacturer: DECKEL MAHO, Model: DMF 220 linear, Year of manufacture: 2001 Control system: Siemens 840D Powerline Travel and Axes X-axis (longitudinal): 2,200 mm Y-axis (transverse): 560 mm Z-axis (vertical): 720 mm Rapid traverse X/Y/Z: 50 m/min X-axis drive: High-dynamic linear drive Work Table Clamping surface: 2,600 x 600 mm Max. table load: 2,200 kg Main Spindle Speed range: 20 - 12,000 rpm (standard) Drive power (100% duty cycle): 35 / 25 kW (S1/S6) Max. torque: 130 / 87 Nm (at 100% duty cycle) Tool holder: SK 40 according to DIN 69871 Tool Changer Number of stations: 30-position magazine Tool change time (chip-to-chip): approx. 4-6 seconds (depending on model) Dimensions & Weight Space requirement approx.: 6,500 x 3,500 mm Machine weight approx.: 12.5 t The machine can be inspected under power by appointment. Technical data and specifications subject to change and error; prior sale reserved! Refurbished 5-axis CNC machining center Deckel MAHO DMF 250 linear in good condition. Year of manufacture: 2004. Fjdpfx Adey Htq As Nspg Control: Heidenhain iTNC 530. Technical data: X travel: 2,500 mm. Y travel: 920 mm. Z travel: 820 mm. B-axis: x/- 105° Worktable: 3,100 x 900 mm Spindle interface: HSK 63 Spindle speeds: 20 - 18,000 rpm Tool changer: 30 positions Equipped with: - Chip conveyor - Through-spindle coolant 40 bar - Operating manual Country of origin: Germany Motor power: 35 kW Machine dimensions (LxWxH): 6,000 x 3,800 x 2,950 mm Machine weight: 25,000 kg The machine can be viewed by appointment. Technical data and specifications subject to change and error, as well as prior sale!

Condition: new, functionality: fully functional, Year of construction: 2025, operating hours: 1 h, power: 12.5 kW (17.00 HP), load capacity: 300 kg, lifting height: 10,000 mm, lifting power: 300 kg/m, platform length: 2,280 mm, platform width: 1,460 mm, overall weight: 2,990 kg, transport length: 2,280 mm, transport width: 1,640 mm, transport height: 2,420 mm, fuel type: hybrid, drive condition: 100 %, color: red, Equipment: UVV, tilting carriage, === KEY SPECIFICATIONS === Year of manufacture: 2025 Working hours: 1 (new) Machine width: 1.46–1.64 m (adjustable crawler tracks) Drive system: Crawler tracks with bi-levelling undercarriage Drivable at full height: No (drivable up to 6.5 m) Extendable platform: No Power: 12.5 kW Working height: 10.0 m Platform capacity: 300 kg Drive type: Bi-Energy (electric + diesel) Battery type: Lithium-ion (48V) Self-levelling outriggers: No (automatic self-levelling chassis) Platform dimensions (L × W): approx. 2.18 × 1.46 m Tyre type: n/a (crawler tracks) CE certified: Yes (EN 280:2015) Weight: approx. 2,990 kg Indoor / Outdoor use: Indoor / Outdoor Fedjx Rwtpopfx Ad Nepg === HIGHLIGHTS === Carefully selected from reliable sources with verifiable history CE certification and full documentation included Ready for immediate transport and operation Complete technical documentation available === CONDITION === New machine in excellent condition Battery tested and in perfect working order Immediately available from stock in Sittard === LOCATION & DELIVERY === Located in Sittard, the Netherlands Worldwide delivery available Price on request (EXW / excl. VAT) Brand-new crawler scissor lift with Bi-Energy configuration, suitable for both indoor and outdoor applications. The Almacrawler BIBI 1090 BL EVO Bi-Energy offers a working height of 10 metres and a platform capacity of 300 kg, combined with excellent stability and traction on uneven or sensitive ground thanks to its automatic bi-levelling crawler undercarriage. The Bi-Energy system allows emission-free electric operation indoors as well as diesel operation for outdoor use. The machine is fully inspected, CE certified and ready for immediate deployment. Spare parts, technical documentation and professional support are available upon request. === DELIVERY === Crane loading available upon request Flexible shipping options tailored to your destination All transport is professionally handled by Collé Rental & Sales

Condition: as good as new (ex-display), Year of construction: 2026, Karstens K11 650 Premium Retrofit Cylindrical Grinding Machine Manufacturer: Karstens Technical specifications: Centre distance: 750 mm Centre height: 180 mm / (250 mm optional) Workpiece weight: 100 kg (between centres) – 250 kg (supported between centres) Grinding wheel diameter: 400 mm or 500 mm (external grinding wheel) Workpiece spindle: MT 4, stepless speed adjustment 30–450 rpm, swivel range 0–90° Tailstock: MT 4, quill stroke 45 mm, quill offset adjustment Quill force: 200–600 N manual, (up to 2500 N adjustable as option) Table swivel adjustment: 12.5 degrees Cross slide travel: 80 mm Rapid traverse distance: 50 mm Coarse adjustment with air cushion: 280 mm External grinding spindle motor: 4 kW / (5.5 kW optional) Stepless speed setting of the grinding wheel via potentiometer Internal grinding spindle motor: 2.2 kW Workpiece spindle motor: 1.1 kW Hydraulic motor: 1.5 kW Lubrication motor: 0.1 kW Hydraulic tank: 80 litres Machine weight: Net 3,500 kg Feed drive via DC motor Air-cushioned rapid adjustment of the grinding spindle head for fast and precise positioning. Fpodpfx Ajiv Auded Njg Separate drive for external and internal grinding spindles. Fully automatic operation, feed movement controlled via handwheel switch: rapid feed, rapid return, grinding operation, feed stop, mym-feed. Automatic longitudinal grinding cycle Central coolant supply for all grinding zones Workpiece headstock with steplessly adjustable drive, with live and lockable spindle. Digital feed control with Siemens panel and Siemens PLC for plunge and traverse grinding, input for retraction, infeed values, feed rates, spark-out times, idle strokes, compatible with traditional Karstens infeed control, with colour Siemens touch panel. Scale in X and Z axis by HEIDENHAIN. Comparable with Weiss / EMAG / GP cylindrical grinders / Studer / Kellenberger / Schaudt / Tschudin / Tacchella / Dannobat / Bahmüller / Fortuna.

Condition: excellent (used), Year of construction: 1980, Karstens K11 1000 This Karstens K11 comes from a university environment and was only used very sparingly. All cables and hoses in the wet area have been replaced. It has extremely low operating hours. As we specialize in Karstens cylindrical grinding machines, we can offer you full service (electrical and mechanical) for the machine after purchase. Technical Data: Centre distance: 1000 mm Centre height: 180 mm Workpiece weight: 70 kg (between centers, cantilevered), 250 kg (between centers) Grinding wheel diameter: 400 mm Workpiece spindle: Morse Taper 4, infinitely variable speed 30–450 rpm, swiveling range 0–90° Tailstock: Morse Taper 4, quill stroke 45 mm Tailstock rest beside Z-axis table Quill force: 200–600 N Table swivel: 12.5 degrees Travel of infeed spindle: 80 mm Rapid traverse: 50 mm Coarse adjustment air cushion: 280 mm External grinding spindle motor: 4 kW Fpsdoh Rit Espfx Ad Nsg Internal grinding spindle motor: 2.2 kW Workpiece spindle motor: 0.55 kW Machine weight: net 3,500 kg Infeed drive by DC motor Air cushion-supported rapid adjustment of the grinding spindle headstock for fast and safe positioning at the grinding station. Separate drives for spindles for external and internal grinding. Fully automatic operation cycle, feed movement controlled via rotary switch: Rapid advance, rapid retraction, grinding mode, feed stop, mym-feed adjustment. Automatic longitudinal grinding cycle Central coolant supply for all grinding stations Workpiece headstock with infinitely adjustable drive for rotating and lockable spindle. Infeed control for longitudinal grinding and plunge grinding, settings for retraction, feed amounts, feeds, spark-out times, idle strokes. Digital readout for X-axis by Heidenhain Paper band filter unit can be offered on request. Comparable to Weiss/ EMAG/ GP-cylindrical grinders/ Studer/ Kellenberger/ Schaudt/ Tschudin/ Tacchella/ Dannobat

Condition: new, Year of construction: 2025, lifting height: 4,800 mm, free lift: 1,670 mm, fuel type: diesel, mast type: triplex, power: 55 kW (74.78 HP), motor manufacturer: DEUTZ TCD 3.6 L4, 4-cylinder, 3.62L, gearing type: hydrostat, battery manufacturer: OEM, battery voltage: 24 V, fork length: 1,200 mm, Weights Empty weight: 9.050 kg Functional Lifting capacity: 5.000 kg Maximum passing height: 306 cm CE mark: yes Condition General condition: very good Technical condition: very good Visual appearance: very good Other information Front tyres / undercarriage remaining: 100 Rear tyres remaining : 100 Tyre brand: Exmile (Pneumatic, 4 wheels) Front tyre size: 445/65-22.5 Rear tyre size: 12.5/80-18 Fork type: Standard forks 1,200 Transport dimensions (LxWxH): 4,500×2,050x2,685 Production country: CN Additional information Please contact Sales Department Collé Sittard for more information = Additional options and accessories = - Forklift hook - Free lift - Heater Fedpfx Adoxf Ebhs Nepg - Pneumatic tyres

Condition: new, working width: 1,250 mm, For enquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone). Seppi M. H7 125 Flail Mulcher / incl. slew ring / incl. floating mounting / NEW unit / in stock & immediately available Price: €17,890.00 net / €21,289.10 gross - Working width: 125 cm - Overall width: 140 cm - Depth: 97 cm - Height: 57 cm - Weight: 410 kg without accessories - Mulches grass and light brush up to 7 cm in diameter - Suitable for excavators from 5 to 15 tonnes - Universal interface for mounting various adapter plates - S420: double-walled housing made from high-strength S420 steel - WEARPLATE: housing with replaceable wear plates - LOW PROFILE: low-profile design - Indirect V-belt drive with 4 belts - Drive designed for hydraulic motors depending on carrier's oil flow - 4D ROLLER: reinforced support roller 152 mm Ø, with double-taper roller bearings, height adjustable - COUNTER CUTTERS: two rows of replaceable drop-forged counter blades - Rotor wall thickness: 12.5 mm - Front chain guard - Rear rubber protection - Colour: red RAL3020 · anthracite RAL7021 Fpedpfxjy E Etye Ad Nsg OPT 371 HELIX ROTOR TECHNOLOGY - Triple helix rotor with SMO flails (standard) - 12 pcs, part number 130.02.001 OPT 291 VARIO FLOW - Axial piston hydraulic motor with variable displacement 29–58 cm³ and pressure relief valve - Displacement in cm³ (min-max): 29 - 58 - Required hydraulic pressure in bar (min-max): 100 - 300 - Required hydraulic flow rate in l/min (min-max): 55 – 150 OPT 099 Floating Mount (parallelogram linkage) OPT 555 Oscillating Adapter OPT 372 Hydraulic 190° Rotary Device Three hydraulic lines are required: supply, return, and leakage oil. Optional: MS08 adapter plate incl. bolts and installation = €880.00 net Many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc...) in stock and immediately available. We have a very large selection of various Seppi M. products in our warehouse, all immediately available! Mr. Herden (phone) will be happy to assist you. We are also happy to provide you with a financing offer upon request. We are an official sales and service partner for: - Westtech - OilQuick - Holp - Magni telescopic handlers - DMS - Gierking GMT - Weber MT - Seppi M. - JCB construction machinery - Mercedes-Benz - Iveco With over 800 used vehicles in stock, we are also one of the largest commercial vehicle dealers in Germany. We supply the complete Seppi M. product range! Subject to errors and prior sale! = Further information = Please contact Marius Herden for more information.

Condition: ready for operation (used), Year of construction: 2022, total width: 3,500 mm, product length (max.): 5,000 mm, number of axes: 6, This 6-axis FRONIUS UR10 Roboter e-Series was manufactured in 2022. It features a 6-axis robot with a control panel, a maximum payload of 12.5 kg, and a reach of 1300 mm. Additional specs include a 4000mm linear axis, a rotating/tilting axis with a 250kg capacity, and a torch holder. Ideal for advanced welding applications. Contact us for more information about this machine. Additional equipment • Robot controller and Teach Panel • Bumper (remote protection) and protective foil for TeachPanel • Multifunction flange for magnetic attachment to torch neck Fpsdpfx Adjx D E Hus Njg • Balancer system for hose attachment • weldControl URCap software • TOUCHSENSE CAP - component search using welding wire or gas nozzle • CAP component OFFSET - for moving and copying programs • operateONE: Quick start buttons (Start / Stop / Reset / Emergency stop, Speed potentiometer, Selector switch for 2 stations operation) • slideONE: 4000 mm linear axis for Universal Robot with an effective stroke of the robot at 1600 mm • RotateTWO 250: External rotating/tilting axis for the robot with a 250 kg load capacity, including standard product with octagonal plate (16 mm perforation) and SW 600x50 table • Safety technology: 1 set of laser light barriers with steel column and 1000 mm light barriers (safety SPS for 2-station operation) Machine Benefits Technical Machine Benefits • Max reach: 1300 mm • Welding technology: holdONE = torch holder incl. integrated freedrivetaster, fronis cmt torch • Ergonomic holder for ur teach panel • Supports all welding positions and ensures accessibility • Floor stand for free-standing axis on two columns including leveling plates for installation • The tools shown in the pictures and the 3 cabinets are included. Extra Information Machine still under power

Condition: used, -Brand: Brevetti Gasparin -Model: Mod.450 Fpedpfxjwx Rkqj Ad Nsg -Dimensions: 1980x1605x915 mm -Usable bread length passage: 400–500 mm -Usable bread height passage: 100–140 mm -Standard slice thickness: 8.5 / 9.5 / 10.5 / 11.5 / 12.5 / 13.5 mm -Hourly output (sliced breads): 300–500 pcs -Power: 1.1 kW -Motor power: 1.5 HP -Compressor motor power: 2 HP -Voltage: 380V / 50Hz / 3ph -Weight: 385 kg -Year of manufacture: 2003

Condition: good (used), Year of construction: 1981, machine/vehicle number: 055-014-19, Offer 25275 Fpjdpoy Ew Szofx Ad Neg Technical Data: - Max. press force: 25 t - Max. ram stroke: 500 mm - Stroke speed: 200 mm/sec - Return speed: 450 mm/sec - Installation height: 800 mm - Throat depth to ram center: 380 mm - Ram clamping surface: 440 x 360 mm - Ram clamping pin: 40 mm - Table size: 630 x 500 mm - Table opening / through hole: 180 mm - Electric foot pedal - 2 hand control panels - Drive: 400 V / 12.5 kW - Space requirement approx.: W 800 x H 2750 x D 1150 mm - Weight approx.: 2200 kg

Condition: good (used), Radii from 2 mm to 12.5 mm. Expandable up to 25 mm. 45° bevels up to 16 mm wide. Workpiece support extendable up to 380 mm. Optional feed system available. You will receive an invoice with VAT shown separately. Price applies ex stock Haldensleben. Fjdpfxsw Sw Syj Ad Nopg

Condition: new, Year of construction: 2018, functionality: fully functional, Standard technical data: Swing diameter over bed: 580 mm Swing diameter over carriage: 470 mm Maximum machinable diameter: 360 mm Max. workpiece length: 250 mm Traverse (X): 260 mm Traverse (Z): 350 mm Traverse (Y): 100 mm (+/- 50) C axis: 360 degrees (0.001-degree increments) Spindle speed: 50-6,000 rpm Spindle nose: JIS A2-6 Spindle bore diameter: Ø62 mm Front spindle bearing diameter: Ø100 mm Turret type: M-V12 Number of tools: 12 Tool size: 20x20 mm Tool shank diameter: Ø32 mm Tool change time: 0.1 sec Driven tool speed: 45-6,000 rpm Rapid traverse (X): 25 m/min Rapid traverse (Z): 30 m/min Rapid traverse (Y): 12.5 m/min Main motor power (15 min/continuous): 11/7.5 kW (PREX) Driven tool motor power: 5.5/3.7 kW (PREX) Machine dimensions (L x W x H): 2,020 x 1,734 x 2,250 mm Machine weight: 4,050 kg Control: OSP P300L Standard specification: 1 OKUMA CNC Lathe Model LB2000 EXII MYC with OSP-P300L CNC Controller, including CE mark & EMC 1 set European Standard Specification 1-1. V12 radial turret head, 1 set 1-2. Spindle, 1 set (1) Spindle speed: 50-6,000 rpm (1 set) (2) Spindle motor PREX 11/7.5 kW (1 set) (3) Spindle: JIS A2-6; bore Ø62 mm (1 set) (4) C-axis control, 360 degrees (0.001-degree increments) (1 set) (5) SR1146 hydraulic cylinder for chuck (1 set) 1-3. MT4 tailstock 1-4. Dual-action foot pedal for chuck and tailstock side, 2 sets 1-5. Driven tool motor PREX 5.5/3.5 kW (2 min continuous) 1 set Fpedpfey H H Afjx Ad Njg 1-6. Driven tool speed: 45 - 6,000 rpm, 1 set 1-7. Work area lighting, 1 set 1-8. Full enclosure, 1 set 1-9. Chip tray, 1 set 1-10. Door interlock, 1 set 1-11. Lubrication monitoring, 1 set 1-12. Automatic chuck open/close on main spindle, 1 set 1-13. Chip air blow, 1 set 1-14. Foundation bolts, 1 set 1-15. Tool setter, 1 set 1-16. CE marking, 1 set 1-17. IEC standard compliance, 1 set 1-18. Transformer, 1 set 1-19. Coolant system with 250W pump, 1 set 1-20. OSP-P300L CNC control with 15" color touchscreen monitor, 1 set 1-21. OSP-P300L Advanced One Touch IGF-M-E kit specification (1 set) * Multitasking machines coordinate conversion (1 set) * Multitasking machines profile generation (1 set) * Advanced One Touch IGF (graphical programming assistant with dialogue-based interface) (1 set) * Real 3D simulation (1 set) * Cycle time monitoring (1 set) * Load monitor (1 set) * NC operation monitor (1 set) * Cycle time reduction function (1 set) * Hi-Cut Pro (machining-specific servo optimization) (1 set) * Variable spindle speed control (1 set) 1-22. 2-stage position indicator lamp, 1 set 1-23. Program storage: 2GB, 1 set 1-24. Operation memory: 2MB, 1 set 1-25. Spindle orientation, electric, 1 set 1-26. Inch/metric conversion, 1 set 1-27. Ball screw pitch error compensation on X/Z axes, 1 set 1-28. Workpiece ejection monitoring, 1 set 1-29. Lifting hooks, 1 set 1-33. TAS-C thermal compensation on the frame 6” chuck Chip conveyor

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, working width: 1,240 mm, welding power (max.): 420 kVA, wire diameter (max.): 8 mm, type of input current: AC, mesh size: 25 mm, working length: 4,000 mm, wire diameter (min.): 2 mm, Machine Profile: Schlatter MG900 PG12 The Schlatter MG900 is a high-performance, fully refurbished resistance welding line, specifically designed for the production of wire mesh panels. It can process wire diameters of up to 12 mm with a maximum mesh width of 1,250 mm and a length of up to 3,000 mm. The machine has undergone comprehensive modernization to ensure maximum efficiency and flexibility in production. Technical Specifications 1. Main Components: Longitudinal Wire Feeder LV - Upgraded to a high-precision servo axis. - Magazine feeders for wires up to 3,000 mm in length. MG12.4 Mesh Welding Machine - Fitted with 6 transformers. - Four (4) Schlatter welding presses, 5 kN each. - Machine upgraded to 12 welding presses. Cross Wire Feeder QFD34 - Allows double wire insertion for two different line wires. - Note: The second tier is not yet installed in the photos. Mesh Extraction MVL - Driven by MS2N servo motor with CtrlX by Bosch Rexroth. - Equipped with three Schlatter mesh grippers (expandable on request). Fpsdpfxoy D Huis Ad Neg Mesh Stacking Unit MS - Automatic stacking of mesh panels (travel distance 3,100 mm). Control and Power Cabinet - Siemens S7 TIA machine control system. - Rexroth CtrlX components for high-dynamic motion control. Longitudinal Wire Loader LFE - Not included, available on request. Special Features and Advantages: - Full Refurbishment: Machine has been completely overhauled and modernized, with warranty included. - Efficiency: Fully automated operations via mesh stacker and servo-driven longitudinal wire feeder. - Future-Proof: Equipped with the latest technologies and control components. Specification: - Mesh width (cross wire length): max. 1,250 mm / min. 200 mm - Mesh length, with manual loading: max. 3,200 mm / min. 300 mm - Maximum distance between outermost line wires: 1,200 mm - Longitudinal wire spacing: 25 – 150 mm - Cross wire spacing: min. 12.5 mm, infinitely programmable - Longitudinal wire diameter: 2.0 – 10.0 mm - Cross wire diameter: 2.0 – 8.0 mm - Maximum number of longitudinal wires: 24

Condition: new, Year of construction: 2025, High quality, solid construction, reliability and ease of use are the distinguishing features of POWER ROLL feeds. Fjdpsgykgzefx Ad Nspg Speeds 3.5 / 5/7/10 / 12.5 / 16/25/32 m / min Feed rollers 3 pcs. Roll diameter 120 mm Roll width 60 mm Roller spring deflection 20 mm Motor power 0.75KW (1.0 PS) Voltage 400V / 50 Hz Weight approx. 57 kg

Condition: new, Year of construction: 2025, High quality, solid construction, reliability and ease of use are the distinguishing features of POWER ROLL feeds. Speeds 3.5 / 5/7/10 / 12.5 / 16/25/32 m / min Feed rollers 4 pcs. Roll diameter 120 mm Roll width 60 mm Roller spring deflection 20 mm Engine power 0.75 KW (1.0 PS) Fpedpfx Aegykg Ned Nsg Voltage 400 V / 50 Hz Weight 61 kg

Condition: excellent (used), functionality: fully functional, Twin-Screw Extruder / Twin-Screw Kneader COLLIN ZK 25 For sale is a COLLIN ZK 25 twin-screw extruder in a compact laboratory or technical center design. The machine is ideal for trials, compounding, product development, as well as smaller-scale production applications. The extruder features a screw diameter of 2 x 25 mm with a process length of 36 D (6x6 D). Depending on the configuration, screw speeds of 460 / 600 / 800 min⁻¹ are possible. The drive power is 9.7 / 12.5 / 16 kW. The maximum melt pressure is 320 bar, and the maximum melt temperature is 400 °C. The machine is equipped with multiple heating zones. Barrel heating is 1 x 850 W plus 5 x 1200 W, and nozzle/adapter heating is 600 W. Water cooling is available, and temperature control is provided for zones 1 to 6, with water cooling connected via hose. Technical Data: • Manufacturer: COLLIN • Model: ZK 25 • Design: Twin-screw extruder / Twin-screw kneader • Screw diameter: 2 x 25 mm • Screw length: 36 D • Screw speed: 460 / 600 / 800 min⁻¹ • Max. melt pressure: 320 bar • Max. melt temperature: 400 °C • Weight: approx. 550 kg • Dimensions: Fpsdpfx Asy A H Umjd Nog • Length: approx. 2,100 mm • Width: approx. 600 mm • Height: approx. 1,900 mm • Screw center height: approx. 1,100 mm Electrical Data: • Connection: 3 x 400/230 V, 50/60 Hz • Power supply: L1 / L2 / L3 / N / PE • Fusing: 3 x 50 A • Max. connected load with downstream units: 30 kW Applications: Ideal for laboratory usage, technical centers, R&D, test series, compounding, and material testing.

Condition: excellent (used), Year of construction: 2018, working width: 1,200 mm, total length: 12,500 mm, 1 point 2 points boxes 3 points boxes Cardboard from 210-800 gsm Corrugate A/B/E Crash lock 300 meter per minute Fedstq E U Sjpfx Ad Nepg Max width open box 120cm Min width open box 5cm alignment unit unit for 1-3th creasing Crash lock Gluing unit KAS C1000 3 Guns unit 2end and 4th creasing Remote control Lenght 12.5 m 12KW

Condition: new, mileage: 884 km, power: 100 kW (135.96 HP), fuel type: diesel, empty load weight: 3,425 kg, maximum load weight: 75 kg, overall weight: 3,500 kg, tire size: 225/65 16C, tire condition: 100 %, axle configuration: 4x2, wheelbase: 3,750 mm, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro6, suspension: steel, operating hours: 884 h, front tire size: 225/65 16C, rear tire size: 225/65 16C, Equipment: ABS, airbag, central locking, cruise control, electronic stability program (ESP), immobilizer system, onboard computer, sliding door, soot filter, Reference number for inquiries: 81098 Iveco Daily * Year of manufacture: New vehicle * ABS (Anti-lock Braking System) * ESP (Electronic Stability Program) Fpedpjyrbq Tsfx Ad Njg * Power windows * Particle filter * Power steering * Immobilizer * Central locking * On-board computer * Airbag * Electric windows and mirrors * Remote central locking * AdBlue tank * Multifunction steering wheel * Cruise control * Transmission type: Manual gearbox * Suspension: Leaf springs * Gross vehicle weight: 3,500 kg * Unladen weight: 3,425 kg * Payload: 75 kg * Permissible total weight: 3,500 kg * Tire condition front axle: 100% — Tire size: 225/65 R16C * Tire condition rear axle: 100% — Tire size: 225/65 R16C * Wheelbase: 3,750 mm * Tire size: 225/65 R16C * Oil & Steel Scorpion 18 * Basket and ground controls * Operating hours: 11 * Working height: 17.8 m * Platform height: 15.8 m * Platform capacity: 300 kg * Lateral outreach: 12.5 m * Work basket: 1,400 x 700 x 1,100 mm * Slew angle: 400° * Basket rotation: +/- 90° * Outriggers: electrohydraulic H-style supports; gross vehicle weight: 3,500 kg Liability disclaimer: Subject to change, prior sale, and errors excepted. You can find more photos and videos on our website. Our comprehensive services include for example: * Purchase / sale / rental of commercial vehicles * Fast and hassle-free financing * Arrangement of all (export) documents * Ordering of export / customs license plates * Vehicle preparation: new tarpaulins, signwriting, painting etc. * Professional loading / load securing * TÜV inspections, registration service * Transfer of commercial vehicles Please contact our trained staff — we will be happy to advise you.

Condition: refurbished (used), Year of construction: 2026, functionality: fully functional, For sale: radial drilling machine currently undergoing a complete overhaul in our facility. After completion, the machine will meet all technical standards and parameters comparable to a new machine. The machine will be fully operational and available for testing under power. ✅ 12-month full warranty covering all mechanical components and electrical system Technical specifications: Max drilling capacity steel / cast iron: 75 / 85 mm Max tapping capacity steel / cast iron: M56 / M68 Max distance spindle – table: 2000 mm Min distance spindle – table: 390 mm Spindle taper: MK5 Spindle speed range: 12.5 – 1600 rpm Spindle stroke: 350 mm Mechanical spindle feed Power supply: 400V / 3-phase Electrically raised/lowered arm Electric arm clamping Motor power: 5.5 kW Dimensions & weight: Weight: approx. 7000 kg Dimensions (L x W x H): 3275 x 1170 x 3280 mm Machine condition: Fully rebuilt and modernized Condition comparable to a new machine Available for inspection under power ✅ 12-month full warranty covering all mechanical components and electrical system Fpodpfx Aey D Sr Hed Neg Terms of sale: Location: Poland Delivery: FCA Bydgoszcz Loading included in price

Condition: used, functionality: fully functional, Year of construction: 2008, operating hours: 923 h, machine/vehicle number: CE136689, power: 3 kW (4.08 HP), load capacity: 450 kg, lifting height: 8,000 mm, platform length: 3,320 mm, platform width: 1,170 mm, overall weight: 2,330 kg, transport length: 2,500 mm, transport width: 1,200 mm, transport height: 2,350 mm, construction height: 2,350 mm, tire condition: 40 %, wheelbase: 1,860 mm, ground clearance: 20 mm, color: orange, We are offering this used Haulotte Compact 10 scissor lift, year of manufacture 2008. Model: Compact 10 Serial number: CE136689 Weight: 2,330 kg Year of manufacture: 2008 Rated power: 3 kW Maximum gradeability: 25 % Maximum load capacity (indoor use): 450 kg Maximum load capacity (outdoor use): 450 kg Number of persons + load (indoor use): 2 persons + 290 kg Number of persons + load (outdoor use): 1 person + 370 kg Maximum lateral force (indoor use): 400 N Fodpfx Adey Atpdj Nopg Maximum lateral force (outdoor use): 200 N Maximum wind speed (indoor use): 0 m/s Maximum wind speed (outdoor use): 12.5 m/s Maximum tilt (indoor use): 2 degrees Maximum tilt (outdoor use): 2 degrees If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, Year of construction: 1983, Used machine Year of manufacture: 1983 Fodpfx Adey Dkhgj Nepg Features and technical data: with 2 combination units with 2 contact rollers, 1 x 65° shore, 1 x 85° shore and 2 air sanding shoes Sanding width: 1350 mm Abrasive belt dimensions: 1360 x 1900 mm Maximum workpiece thickness: 150 mm 1st unit with 15 kW 2nd unit with 15 kW Cleaning brush Roller table at infeed Roller table at outfeed Infinitely variable feed speed: 2.5 to 12.5 m/min Weight approx. 3700 kg Availability: approx. May/June Location: Thuringia

Condition: ready for operation (used), Year of construction: 2014, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 800 mm, table load: 4,600 kg, overall weight: 18,600 kg, spindle speed (max.): 8,000 rpm, number of axes: 3, This 3-axis Johnford VMC-1600S was manufactured in 2014. It features a longitudinal travel of 1600 mm, cross travel of 1100 mm, and vertical travel of 800 mm. The machine has a robust table working surface of 1800 x 1000 mm and a maximum table load capacity of 4600 kg. If you are looking to get high-quality milling capabilities, consider the Johnford VMC-1600S vertical machining centre we have for sale. Contact us for further details. • Table working surface: 70.9” x 39.4” (1800 x 1000 mm) • Spindle nose to table: 5.9”–37.4” (150–950 mm) • Spindle center to column: 45.3” (1150 mm) • Spindle taper: • VMC-1600S: BT-40 / CAT-40 • VMC-1600SHD: BT-50 / CAT-50 • Spindle diameter: • VMC-1600S: 2.75” (70 mm) • VMC-1600SHD: 3.9” (100 mm) • Spindle speed: • VMC-1600S: Auto Hi-Lo Gear 80–8000 rpm • VMC-1600SHD: Auto Hi-Lo Gear 10–4500 rpm • Spindle motor: • VMC-1600S: 15/10 HP (15/20 HP optional) • VMC-1600SHD: 25/20 HP • Rapid traverse (X/Y/Z): 18 / 18 / 12 m/min • Feed (spindle): 1–12,000 mm/min • Tool selection: Bi-direction random type, shortest path • Number of tools: • VMC-1600S: Armless 24; Arm type 24/32 (optional) Fjdey A Ik Ajpfx Ad Nopg • VMC-1600SHD: Armless 20; Arm type 24/32 (optional) • Max tool diameter: • VMC-1600S: 4” (100 mm) • VMC-1600SHD: 9.8” (250 mm) • Max tool length: • VMC-1600S: 12.5” (320 mm) • VMC-1600SHD: 15.7” (400 mm) • Max tool weight: • VMC-1600S: 22 lbs (10 kg) • VMC-1600SHD: 33 lbs (15 kg) • Floor space: 177.2” x 209.8” (4500 x 5330 mm) • X/Y/Z ballscrew diameter: φ50 / φ63 / φ50 • Cutting capacity (S45C): • Milling: 180 cc/min (S) / 320 cc/min (SHD) • Drilling: φ40 mm (S) / φ52 mm (SHD) • Tapping: M30 x P3.5 (S) / M50 x P4.5 (SHD)