Used Sig Hmr - 7478 for sale (283)

Condition: used, This listing is for the Sigma 2-15 Centrifuge +Accessories Shown The unit is in full working condition and is ready for immediate use The Sigma 2‑15 is a benchtop (tabletop) laboratory centrifuge produced by Sigma (Sigma Laborzentrifugen GmbH), designed for moderate-speed separation tasks across various scientific and industrial settings Key Features & Specifications: Purpose: Used to separate sample components (e.g., cells, sediments) through centrifugal force—ideal when high speed isn't required Power & Voltage: Operates at 240 W, 220–240 V, 50 Hz Speed: Kledoxhffrjpfx Ak Est Centrifuge motor: up to 13,500 rpm. Rotor-specific max: up to 15,300 rpm, depending on rotor type . Capacity: Typical configuration includes 4 buckets, each capable of holding up to 100 ml (e.g., rotor 11192 with buckets 13012) Some versions deploy a fixed-angle rotor (e.g., 12189) with capacity around 480 g Dimensions: Compact footprint of approximately 33 × 43 × 30 cm (W × D × H) . Other Features: Microcontroller-based control of speed and time. Multiple acceleration/deceleration curves and program memory (up to 10 programs) in some configurations Magnetic rotor identification (prevents overspeeding) and induction drive for low maintenance

Condition: used, This listing is for 1 of 2 Millipore Sigma RioS Essential 24 Water Purification Tank These units are in full working condition and is ready for immediate use The RiOs Essential 24 is a compact, efficient RO system that delivers around 480 L/day of consistent Type 3 water. It features minimal maintenance, intelligent self‑management, and smart cartridge monitoring—ideal for routine lab task Key Performance Specs Flow Rate: 24 L/hour (≈ 480 L/day) for non-critical lab uses Klodpfjxhfpdox Ak Eot Purity: Provides Type 3 water with ionic rejection between 95–99% and organic/particulate rejection ≥99% (MW ≥ 200 Da) Purification Process & Internal Features Progard® pretreatment cartridge: Removes particles (>1 µm), free chlorine, hardness, and colloids. High-efficiency RO membrane: Removes dissolved ions, organics, microorganisms, and particulates. Recovery loop: Recycles a portion of reject water to feed, cutting water waste by over 50% compared to conventional RO systems Temperature compensation: Automatically adjusts pump pressure to maintain steady flow across 5–35 °C feed water Design & Operation Footprint: Compact – 47 cm high × 26.8 cm wide × 33.9 cm deep Weight: Net weight ~10.9–12.1 kg; Operating weight ~14.4–15.7 kg Power: 100–230 V AC, 50–60 Hz Feed water specs: Tap water under 2,000 µS/cm conductivity, 1–6 bar pressure, 5–35 °C,

Condition: used, This listing is for the Heidolph MR Hei-standard Magnetic Hotplate Stirrer The unit is in full working condition and is ready for immediate use Klodpfx Asxhfqnsk Ejt The Heidolph MR Hei‑Standard is a laboratory magnetic hotplate stirrer—a reliable and robust device designed for simultaneous heating and stirring of liquids up to moderate scales. Key Features & Technical Specs Heating & Stirring: It heats up to 300 °C on the hotplate (with sample temperatures reaching around 250 °C) and stirs with speeds up to 1,400 rpm, capable of handling volumes up to 20 liters of water Heating Power & Plate: Offers around 800–825 W of heating power, using a ceramic-coated silumin (Kera‑Disk®) plate that ensures excellent heat distribution and resistance to scratches and chemicals Controls & Accuracy: Features analogue dials for setting temperature and speed (typically from 100 to 1,400 rpm), with speed accuracy of ±2% and temperature setting accuracy of about ±5 °C (or ±1 °C when using an external sensor)

Condition: used, Year of construction: 1995, functionality: fully functional, travel distance X-axis: 750 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 20 m/min, rapid traverse Z-axis: 20 m/min, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, controller manufacturer: FANUC, controller model: 0 - M, workpiece weight (max.): 700 kg, spindle nose: ISO 40, CNC: FANUC 0-M TABLE Usable surface: mm 900 × 400 T-slots (number – width – pitch): 3 × mm 18 × mm 125 Max load on table: kg 700 AXIS TRAVELS X-axis longitudinal travel: mm 750 Y-axis transverse travel: mm 400 Z-axis vertical travel: mm 450 Spindle nose–table distance (min/max): mm 160 / 610 SPINDLE Tool taper: N40 DIN 69871-A Speed range: rpm 40–4,000 Constant power speed: rpm 750 Max torque: Nm 47 TOOL MAGAZINE Number of tool positions: 16 Tool selection: RANDOM, fixed position Automatic tool change: direct from spindle to magazine Tool holder taper: N40 DIN 69871-A TOOL DATA Tool shank: DIN 69872-A Max diameter of adjacent tools: mm 75 Max tool length: mm 240 Max tool weight: kg 6 Tool change time: approx. 5.5 s Klsdoygm Rbspfx Ak Eot Chip-to-chip time: approx. 8 s FEED RATES Working feed (X, Y, Z): mm/min 0–10,000 Rapid traverse: mm/min 20,000 GENERAL CHARACTERISTICS Machine weight: approx. kg 4,250 Overall dimensions: mm 2,320 × 2,880 Total installed power: kW 12 Power supply: V 380 Year of manufacture: 1995 MACHINE SUPPLIED COMPLETE WITH: • Operation and maintenance manuals and CE declaration

Condition: used, Year of construction: 1996, x-travel 3000 mm Klodpfx Ajud Ixlsk Eot y-travel 1500 mm z-travel 400 mm Serial number 7872 chip conveyor MAYFRAN 40.6GS-HR/SP20 control SIEMENS SINUMERIK 820 table surface area 3000 X 1500 mm table load 1000 kg / m2 Tool changer 52 stck. weight of the machine ca. 15000 kg UNISIGN - Uniport 4 - Machining centre - Vertical Technical details will be added shortly 40820 operating hours including chip conveyor from the manufacturer MAYFRAN with TYPE 40.6GS-HR/SP20 Total weight: 15,000 kg

Condition: used, DC motor, servo motor, gear motor, electric motor, direct current gear motor -Manufacturer gearbox Sigl type: 65.1GE/SP126 -Manufacturer Motor Sigl Type: G1250 NM100 TDG 60-10 B14 -Speed: 14 rpm adjustable -Power: 1.25 kW -Construction: angle -Diameter shaft: Ø 28 mm Kledpfxechfb Ne Ak Eot -Protection class: IP 54 -Dimensions: 660/192/H250 mm -Weight: 38 kg

Condition: good (used), Servo motor, electric motor, DC motor, stepper motor, stepper motor, stepping motor Kljdpfx Akjqvp Ngo Ejt -Manufacturer: Sigma, Vexta Stepping Motor Stepper motor -Type 20-3437D200-F075 -Shaft: Ø 10 x 30 mm -Dimension: 130/90/H90 mm -Weight: 2.4 kg

Condition: used, SIGNODE AUTOMATIC STRAPPING STATION, model M400 The formed bundle is automatically transferred, by the driven rollers of the evacuation trolley, to the automatic Strapping Station. The bundle will be stopped at the programmed strapping positions to allow the automatic application of the steel strap. It is composed of: Kledjwxxz Rspfx Ak Eot - SIGNODE automatic Strapping Machine Model M400/PA/TSM for vertical strapping, - Pneumatic strapping floating head for steel strap of 32 mm. width (1¼") and 0,9 mm. wall thickness; - 450 kg. jumbo coil dispenser with electrical unwinding; - Switchboard. SIGNODE automatic Strapping: Machine Model M400/PA/TSM for vertical strapping Pneumatic strapping floating head: for steel strap of 32 mm. width (1¼") and 0,9 mm. wall thickness 450 kg. jumbo coil dispenser: with electrical unwinding Switchboard: Included

Condition: good (used), Hazard lights, night markings, flashing lights, day/night markings Klsdsfkph Uspfx Ak Eet -Signal lights for: Wind turbines -GF light: RE-LED 864 (Red) -Housing: aqua signal -Price: per piece -Quantity: 2 pieces -Dimensions: 380/356/H290 mm -Total weight: 15 kg

Condition: good (used), Siga Type: GS-517-400 External dimensions LxDxH 4960 x 2500 x 2400 mm. Complete system is calibrated according to DAKKS and and therefore approved for approval-relevant tests Butane loading speed - infinitely variable from 5 g/h to 77 g/h Loading speed fuel - infinitely variable from 5 g/h to 100 g/h Fuel temperature control - infinitely variable from 20°C to 50°C Fuel quantity selectable - from 0 l to 8 l Selectable breakthrough criterion - from 1g to 10g Purge air flow temperature - Infinitely variable from 25°C to 30°C Kljdpfxju Aa A Ae Ak Eet Precision scales for test piece and reference AKF - Measuring range up to 6 kg, 0.1 8 resolution Purging vacuum - Infinitely variable from 0 hPa to 30 hPa Rinsing air flow - infinitely variable from 1 l /min to 60 l/min Humidity purge air flow - infinitely variable from 10% rH to 85% rH Number of cycles from 1 to 999 (load/purge) Condition: gebraucht / used Sale ex location! Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: used, Keysight / Scienlab Battery Test System SL1001A + Angelantoni Climate Chamber DM500 C 10 ESS SPEEDY BT SP Complete Battery Testing System – For Laboratory Use Incl. PC, software & technical documentation For sale is a professional battery test system, consisting of: - Keysight / Scienlab SL1001A Battery Test System - Angelantoni DM500 C 10 ESS SPEEDY BT SP Climate Chamber - Monitoring/Sampling Unit - Control PC with original software - Technical documentation The system is fully functional, well-maintained, and ideally suited for battery module testing, research, development, and quality assurance. Technical Data – Scienlab SL1001A: - Manufacturer: Keysight / Scienlab - Model: SL1001A - Year of manufacture: 2020 - Voltage / Current / Power: 80 V / 600 A / 24 kW - Dimensions (L×W×H): approx. 1.6 × 0.9 × 3.3 m - Weight: approx. 700 kg - Function: Charging, discharging, and cycling of battery modules - Condition: Very well maintained, laboratory use only Technical Data – Angelantoni DM500 C 10 ESS SPEEDY BT SP: - Manufacturer: Angelantoni Industrie S.r.l., Italy - Model: DM500 C 10 ESS SPEEDY BT SP - Year of manufacture: 2019 - Weight: approx. 1,225 kg - Temperature range: -70 °C ... +180 °C - Humidity range: 10 ... 98 % rH - Refrigerants: R449A + R23 - Pressure ranges (PS Hi/Lo): 28 bar / 8 bar - Wi-Fi integrated - CE certification present - Internal dimensions (L×W×H): approx. 1.6 × 2.3 × 3.3 m - Function: Temperature and humidity testing, ESS (Environmental Stress Screening) - Power supply: 3PH + N + PE, 400 V ±10 %, 50 Hz, full load 54 A - Max. power consumption: 32.5 kW Ksdpfx Akoxuqk Ho Ejlt Monitoring / Sampling Unit: - Dimensions: 0.6 × 0.5 × 0.2 m - Measured variables: Cell voltages, current, temperature - Interfaces: CAN, Ethernet - Compatible with Scienlab / Keysight PathWave software PC + Software + Documentation: - Industrial PC with control and measurement software - Enables automated test runs, logging, and data analysis Overall Dimensions / Weight (approx.): Component Dimensions (L×W×H) Weight Scienlab SL1001A 1.6 × 0.9 × 3.3 m 700 kg Angelantoni Chamber 1.6 × 2.3 × 3.3 m 1,225 kg Monitoring / PC 0.6 × 0.5 × 0.2 m 50 kg Total system L 3.2 m × W 2.5 m × H 3.3 m approx. 1,975 kg Applications: - Development, testing, and lifespan analysis of battery modules (e.g., Li-ion, LFP, NMC) - Fast charging and cycle tests - Environmental simulation for temperature and humidity - Research, industrial, and university laboratories Important Note: "The table shown in the photos is not included in the sale." Scope of Delivery: - Scienlab SL1001A power unit - Angelantoni DM500 C 10 ESS SPEEDY BT SP climate chamber - Monitoring/Sampling unit - Control PC with software - Technical documentation and manuals - Connection cables and accessories (as available) Condition: used Scope of delivery: (see image) (Specifications and data are subject to change and error!) For any further questions, we are happy to assist you by phone.

Year of construction: 2007, condition: reconditioned (used), We have a SIGMA pick & place feeder available. Year 2007. The state of the feeder is exceptional. Not used very often. Kjdped Nkp Aefx Ak Eslt This feeder was installed on a Buhrs poly wrapping machine but can also be installed on other mechanical machines. Is meant for feeding plastic card and difficult inserts. The position of feeder is very precise with these type of feeders.

Year of construction: 2007, condition: reconditioned (used), We have a SIGMA pick & place feeder available. Year 2007. The state of the feeder is exceptional. Not used very often. Kjdpfx Aked Nkpys Eolt This feeder was installed on a Buhrs poly wrapping machine but can also be installed on other mechanical machines. Is meant for feeding plastic card and difficult inserts. The position of feeder is very precise with these type of feeders.

Condition: used, functionality: fully functional, Geosig Accelerometer with recorder GeoSIG GMS plus Recorder model no GMSplus-IP67 Kljdsq S Uz Uepfx Ak Eot Geosig Accelerometer/sensor Model AC73 Type HHV Vibration sensor and Recorder including accessories as shown in the photos. This Vibration sensor and Recorder is used. We have a stock of approximately 100 used sensors and 100 used recorders available.

Condition: new, Extraction capacity of filter unit at spigot*: 2600 m³/h (free-eye) Total power consumption*: 0.62 kW Klsdpfx Aspkwausk Ejt Operating voltage: 400 V, 50/60 Hz,3Ph+PE Noise level*: 66 db(A) Dimensions L/W/H in mm: L 111 / W 508 /H 545 Colour: RAL 7035 Weight: 111 kg Manufacturer: ISI Industrieprodukte GmbH *Depending on filter equipment Special voltage or special colour on request NEW: Pre-filter system (optional) Application: Extraction of oil mist, emulsion mist (for emulsions with higher oil contents) and smoke, for small to very large machine workrooms | Oil mist separator. Your advantages of the ELBARON series: - 18 unit variants available - Direct from the manufacturer - ISI-TRONIC as standard (digitalised filter control) - Electronically controlled EC fan as standard - Speed and air flow rate adjustable - Simplex (single-stage) or duplex (two-stage) available - Wide range of air flow rates available - Adaptable to pollutant load and air performance requirements - Large range of mounting and connection accessories - Quality Made in Germany We have developed the ELBARON® filter series for use in machining operations with pure oil or for separating oil mist and smoke (oil mist separator). For many years now, the digital electrostatic air filters of the ELBARON® series have been among the most efficient filter units on the market and are in use worldwide. Our filter units are already digitalised as Option and can be controlled, for example, with a laptop. The ELBARON® unit series comprises 18 unit variants and can be optimally designed for your application in terms of size and performance. ELBARON® units impress with their long service life and absolute functional reliability. Our electrostatic filter cells are dimensioned in such a way that the best possible filter efficiencies, service lives and trouble-free operation are achieved under economic aspects.

Year of construction: 2021, condition: new, Air cleaner for room air purification for aerosols, such as viruses, bacteria, pollen, dusts. ISI AIR CLEANER - adjustable up to 1600 m³/h - 230 V - for large rooms up to 160 m³ Kledpsh Rfcnofx Ak Eet Air output: adjustable up to 1600 m³/h Room size: suitable up to 160 m³ Power: 69 - 209 W Operating voltage: 230V 50/60Hz, 5m connection cable with Schuko plug (EU4) (plug & play) Noise level*: 38.2 - 48.1 db(A 1 m) Dimensions L/W/H in mm: L 550 / W 660 /H 2000 Colour: Lower part: RAL 7016, upper part RAL 7035 Weight: 130 kg Manu´facturer: ISI: Industrieprodukte Scope of delivery: 1 piece ISI AIRCLEANER FT1 1 piece Fine dust filter, ISO 16080 ePM1-90% 1 piece HEPA filter H14, EN1822 Delivery: ex works Buchholz (Westerwald) excluding packaging, directly available The application: Currently, air purifiers are only becoming known because of the Corona pandemic. In principle, air purifiers are also recommended outside of a pandemic. They can significantly improve air quality. Even after the pandemic, there are seasonal pathogens circulating, such as influenza in the colder months. Asthmatics and allergy sufferers benefit from the filtration of pollen and other allergens year-round from an air purifier. How it works: The room air is sucked in at the bottom of the filter unit. In the pre-filter area, the air is freed from dust and larger particles. A subsequent, highly effective HEPA H14 filter system removes 99.995% of particles or aerosols, which may contain pathogens, from the air. Your advantages: - Highly efficient EC fan as standard - Adjustable speed and air output - Long service life and easy filter change - Low noise level - Separation efficiency of up to 99.95 - Quality Made in Germany

Condition: new, Year of construction: 2023, Extraction capacity of filter unit at spigot*: 2600 m³/h (free-eye) Total power consumption*: 0.62 kW Operating voltage: 400 V, 50/60 Hz,3Ph+PE Noise level*: 65 db(A) Dimensions L/W/H in mm: L 975 / W 508 /H 545 Colour: RAL 7035 Weight: 90 kg Manufacturer: ISI Industrieprodukte GmbH Klsdsh Rdxnspfx Ak Eet *Depending on filter equipment Special voltage or special colour on request Application: Extraction of oil mist, emulsion mist (for emulsions with higher oil contents) and smoke, for small to very large machine workrooms | Oil mist separator. Your advantages of the ELBARON series: - 18 unit variants available - Direct from the manufacturer - ISI-TRONIC as standard (digitalised filter control) - Electronically controlled EC fan as standard - Speed and air flow rate adjustable - Simplex (single-stage) or duplex (two-stage) available - Wide range of air flow rates available - Adaptable to pollutant load and air performance requirements - Large range of mounting and connection accessories - Quality Made in Germany We have developed the ELBARON® filter series for use in machining operations with pure oil or for separating oil mist and smoke (oil mist separator). For many years now, the digital electrostatic air filters of the ELBARON® series have been among the most efficient filter units on the market and are in use worldwide. Our filter units are already digitalised as Option and can be controlled, for example, with a laptop. The ELBARON® unit series comprises 18 unit variants and can be optimally designed for your application in terms of size and performance. ELBARON® units impress with their long service life and absolute functional reliability. Our electrostatic filter cells are dimensioned in such a way that the best possible filter efficiencies, service lives and trouble-free operation are achieved under economic aspects.

Condition: new, Extraction capacity of filter unit at spigot*: 980 m³/h Total power consumption*: 0.71 kW Operating voltage: 400 V, 50/60 Hz,3Ph+PE Noise level*: 68 db(A) Dimensions L/W/H in mm: L 1290 / W 345 /H 595 Colour: RAL 7035 Weight: 79 kg Manufacturer: ISI Industrieprodukte GmbH *Depending on filter equipment Special voltage or special colour on request Application: Separation of emulsion mist, for medium to very large machine workrooms. Your advantages of the COBARON series: Klodpfx Akeh Rfbqj Eot - 15 unit variants available - Direct from the manufacturer - ISI-TRONIC as standard (digitalised filter control) - Electronically controlled EC fan as standard - Adjustable speed and air flow rate - Available with a wide range of filters - High-quality filter media in the pre-filter and main filter area - Separation rates of up to 99.95 - Large range of mounting and connection accessories - Flexibly adaptable to the application - Optimum service life - Quality Made in Germany With COBARON, we offer a filter system that meets today's diverse processing possibilities and the resulting pollutant profiles. In the standard programme alone, the COBARON combination filter system offers various filter equipment variants and can thus be variably configured for many applications. The various configuration levels of the COBARON series were specially developed for applications that were borderline cases for many filter systems (mechanical or electrostatic). The combination of both proven filter principles in the appropriate application increases the effectiveness of the air filter and extends the service life. COBARON can be operated as a purely mechanical filter unit with different filter stages - or additionally configured with an electrostatic filter cell. Our filter units are already digitalised as standard and can be controlled with a laptop, for example.

Condition: new, Extraction capacity of filter unit at spigot*: 3550 m³/h (free-eye) Total power consumption*: 0.88 kW Operating voltage: 400 V, 50/60 Hz,3Ph+PE Noise level*: 73 db(A) Dimensions L/W/H in mm: L 1283 / W 1020 /H 595 Colour: RAL 7035 Weight: 170 kg Manufacturer: ISI Industrieprodukte GmbH *Depending on filter equipment Special voltage or special colour on request Application: Extraction of oil mist and smoke, for small to very large machine workrooms (oil mist separator). Your advantages of the ELBARON series: Kedeh Rdypspfx Ak Ejlt - 18 unit variants available - Direct from the manufacturer - ISI-TRONIC as standard (digitalised filter control) - Electronically controlled EC fan as standard - Speed and air flow rate adjustable - Simplex (single-stage) or duplex (two-stage) available - Wide range of air flow rates available - Adaptable to pollutant load and air performance requirements - Large range of mounting and connection accessories - Quality Made in Germany We have developed the ELBARON® filter series for use in machining operations with pure oil or for separating oil mist and smoke. For many years now, the digital electrostatic air filters of the ELBARON® series have been among the most efficient filter units on the market and are in use worldwide. Our filter units are already digitalised as standard and can be controlled, for example, using a laptop. The ELBARON® unit series comprises 18 unit variants and can be optimally designed for your application in terms of size and performance. ELBARON® units impress with their long service life and absolute functional reliability. Our electrostatic filter cells are dimensioned in such a way that the best possible filter efficiencies, service lives and trouble-free operation are achieved under economic aspects.

Condition: new, Extraction capacity of filter unit at spigot*: 350 m³/h Total power consumption*: 0.09 kW Operating voltage: 230 V, 50/60 Hz, 1PH + N + PE Noise level*: 52 db(A) Dimensions L/W/H in mm: L 329 / W 374 /H 510 Colour: RAL 7035 Weight: 25 kg Manufacturer: ISI Industrieprodukte GmbH *Depending on the filter equipment Special voltage or special colour on request Klsdpfjh Rdwxox Ak Est Application: Extraction of oil mist and smoke, for small to very large machine workrooms. Your advantages of the ELBARON series: - 18 unit variants available - Direct from the manufacturer - ISI-TRONIC as standard (digitalised filter control) - Electronically controlled EC fan as standard - Speed and air flow rate adjustable - Simplex (single-stage) or duplex (two-stage) available - Wide range of air flow rates available - Adaptable to pollutant load and air performance requirements - Large range of mounting and connection accessories - Quality Made in Germany We have developed the ELBARON® filter series for use in machining operations with pure oil or for separating oil mist and smoke. For many years now, the digital electrostatic air filters of the ELBARON® series have been among the most efficient filter units on the market and are in use worldwide. Our filter units are already digitalised as standard and can be controlled, for example, using a laptop. The ELBARON® unit series comprises 18 unit variants and can be optimally designed for your application in terms of size and performance. ELBARON® units impress with their long service life and absolute functional reliability. Our electrostatic filter cells are dimensioned in such a way that the best possible filter efficiencies, service lives and trouble-free operation are achieved under economic aspects.

Condition: new, Electrostatic air filter for air-handling systems - central exhaust ELBARON - RON 15 S oGk – 15.000 m³/h – 230 V – without fan Max. Air flow rate: 15,000 m³/h Total power consumption*: 3 x 0.02 kW Operating voltage*: 230 V, 50/60 Hz, 1PH + N + PE Dimensions L/W/H in mm: L 701 / W 1020 / H 1945 Colour: RAL 7035* Weight: 445 kg Manufacturer: ISI Industrieprodukte GmbH *Special voltage or special colour on request The application: The ELBARON duct air filter series were designed for central air filtration in production halls as well as for plant and building technology. Your advantages: - 15 unit variants available - Direct from the manufacturer - High filtration efficiency - Modularly expandable Kjdsh Rfccopfx Ak Eslt - Easy maintenance - Low follow-up costs due to reusable filter media - Simplex (single-stage) or duplex (two-stage) available - Wide range of air flow rates available - Also available as mirror-image version - Robust construction - Quality Made in Germany Based on our filter technology, which has been tried and tested for years, this filter unit can be used as a central air filter unit in ventilation ducts. ELBARON technology reliably filters aerosols, oil mist, emulsion mist and smoke from the air. This way, the air in your production hall is cleaned effortlessly. Our air filter can also be easily integrated into central systems for machine extraction. ELBARON filter units protect downstream heat exchangers or air conditioning units from premature contamination. ELBARON filter technology is based on environmentally friendly electrostatic particle ionisation. This makes our filter units the ideal solution for large production plants due to their high separation efficiency, large capacity and easy maintenance. Take advantage of the enormous potential of ELBARON duct air filters with low maintenance costs. All our electrostatic filter cells and filter media are effortless to clean and reuse.

Condition: new, Extraction capacity of filter unit at spigot*: 600/720* m³/h Total power consumption*: 0.42 kW Operating voltage: 230 V, 50/60 Hz,1Ph+N+PE Noise level*: 67 db(A) Dimensions L/W/H in mm: approx. L 800 / W 493 /H 415 Colour: RAL 7035 Weight: 53 kg Manufacturer: ISI Industrieprodukte GmbH, Germany * Depending on the filter equipment Special voltage or special colour on request Your advantages: - Compact dimensions - ISI-TRONIC as standard Kodeh Rynujpfx Ak Ejlt - Electronically controlled EC fan as standard - Adjustable speed and air flow - Washable pre-filter - H13 particulate air filter provides separation rates of up to up to 99.95%. - Large range of mounting and connection accessories - Flexibly adaptable to the application - Optimum service life - Quality Made in Germany With our TEBARON, we offer a compact air filtration unit which meets today's diverse possibilities of processing and the possibilities of machining and the resulting pollutant profiles. pollutant profiles. The TEBARON is a compact air filtration unit for small to medium to medium-sized machine workrooms for the separation of emulsion mist. Our main development goals were compact dimensions with maximum energy efficiency economical operation due to low follow-up costs and maximum sustainability. To achieve these goals, we use highly efficient, controllable EC fans in the TEBARON- -series we use highly efficient, controllable EC fans. The standard, integrated pre-filter package consists of three parts and is completely washable! It is highly effective against liquids and large to medium particles to protect the main filter and maximise its and maximise its service life. The main filter can be individually adapted to the adapted to the application application. In the standard version, we use an H13 HEPA filter to achieve filter to achieve a filtration efficiency of 99.95% against particles of of 0.3 μ.

Condition: new, machine/vehicle number: G-CL-350-FR-EC, input voltage: 230 V, volume flow: 350 m³/h, noise level: 61 dB, total height: 600 mm, total length: 430 mm, total width: 340 mm, overall weight: 40 kg, ISI G-CLEANER Mechanical air filter device Type: 350 FR Version: Mobile Control: without Horizontal, mobile mechanical air cleaner with EC radial fan for separating gaseous substances. TECHNICAL DESCRIPTION: Ksdevrygpepfx Ak Eelt Air volume: - 390 m³/h (free blowing) - 350 m³/h (effective) (depending on the filter configuration without capture elements) Air inlet: top rear with 4 connections 50 mm Filter configuration: - Pre-filter mat F 5 - HEPA filter H13 according to DIN EN 1822-1 - Activated carbon cassette with 9 kg of pressed, specially impregnated shaped carbon Color: RAL 7035 light gray (optional: special color) Voltage: 230 V Frequency: 50 Hz Protection class: IP54 Fan technology: energy-saving EC technology Air output: adjustable Noise level: 61 db (A) Dimensions: length 430 mm / width 340 mm / height 600 mm Weight: 40 kg

Condition: new, Extraction capacity of filter unit at spigot*: 2050 m³/h Total power consumption*: 1.04 kW Operating voltage: 400 V, 50/60 Hz,3Ph+PE Noise level*: 69 db(A) Dimensions L/W/H in mm: L 1290 / W 588 /H 595 Colour: RAL 7035 Weight: 113 kg Manufacturer: ISI Industrieprodukte GmbH *Depending on filter equipment Special voltage or special colour on request Application: Separation of emulsion mist, for medium to very large machine workrooms. Your advantages of the COBARON series: - 15 unit variants available - Direct from the manufacturer - ISI-TRONIC as standard (digitalised filter control) - Electronically controlled EC fan as standard - Adjustable speed and air flow rate - Available with a wide range of filters - High-quality filter media in the pre-filter and main filter area - Separation rates of up to 99.95 - Large range of mounting and connection accessories Kjdpfx Ajh Rfbxek Eslt - Flexibly adaptable to the application - Optimum service life - Quality Made in Germany With COBARON, we offer a filter system that meets today's diverse processing possibilities and the resulting pollutant profiles. In the standard programme alone, the COBARON combination filter system offers various filter equipment variants and can thus be variably configured for many applications. The various configuration levels of the COBARON series were specially developed for applications that were borderline cases for many filter systems (mechanical or electrostatic). The combination of both proven filter principles in the appropriate application increases the effectiveness of the air filter and extends the service life. COBARON can be operated as a purely mechanical filter unit with different filter stages - or additionally configured with an electrostatic filter cell. Our filter units are already digitalised as standard and can be controlled with a laptop, for example.

Condition: new, Extraction capacity of filter unit at spigot*: 2420 m³/h Total power consumption*: 1.84 kW Operating voltage: 400 V, 50/60 Hz,3Ph+PE Noise level*: 72 db(A) Dimensions L/W/H in mm: L 1290 / W 588 /H 595 Colour: RAL 7035 Weight: 118 kg Manufacturer: ISI Industrieprodukte GmbH *Depending on the filter equipment Special voltage or special colour on request Application: Separation of emulsion mist, for medium to very large machine workrooms. Your advantages of the COBARON series: - 15 unit variants available - Direct from the manufacturer Klsdsh Rfb Hspfx Ak Ejt - ISI-TRONIC as standard (digitalised filter control) - Electronically controlled EC fan as standard - Adjustable speed and air flow rate - Available with a wide range of filters - High-quality filter media in the pre-filter and main filter area - Separation rates of up to 99.95 - Large range of mounting and connection accessories - Flexibly adaptable to the application - Optimum service life - Quality Made in Germany With COBARON, we offer a filter system that meets today's diverse processing possibilities and the resulting pollutant profiles. In the standard programme alone, the COBARON combination filter system offers various filter equipment variants and can thus be variably configured for many applications. The various configuration levels of the COBARON series were specially developed for applications that were borderline cases for many filter systems (mechanical or electrostatic). The combination of both proven filter principles in the appropriate application increases the effectiveness of the air filter and extends the service life. COBARON can be operated as a purely mechanical filter unit with different filter stages - or additionally configured with an electrostatic filter cell. Our filter units are already digitalised as standard and can be controlled with a laptop, for example.