Used Silicon+ Coiler for sale (399)

Condition: ready for operation (used), Year of construction: 2003, functionality: unexamined, total length: 2,400 mm, total height: 1,400 mm, total width: 1,300 mm, Kallfass Shrink Tunnel STANDARD 650 NT Universally applicable high-performance shrink tunnel with side-adjustable air flaps and externally adjustable bottom air outlets for precise control of the hot air flow, ensuring optimal shrink results even with challenging product contours. The recirculation system, a tunnel hood with an additional double-chamber system, and significantly enhanced all-round insulation provide energy-efficient operation. Equipped with infinitely variable rod chain conveyor. This tunnel is suitable for use with all shrink films, especially polyethylene (LDPE) or polyolefin films, in medium to high performance ranges. Comprehensive standard features: • Silicone-coated transport rods, rod spacing 25 mm, rod diameter 12 mm • Infinitely variable speed adjustment for the rod chain conveyor • Wear-free, contactless temperature control • Energy-saving, highly effective thermal insulation of the tunnel hood • Temperature control via electronic thermostat • Air outlet flaps adjustable from outside during operation • Fixed clearance height 200 mm • Adjustable working height • Safety equipment in accordance with EC Directive EN 60204: over-temperature monitoring • Machine design complies with EC Machinery Directive 98/37/EC (CE mark), built to EN/VDE standards and relevant accident prevention regulations for the food and beverage industry (GS test mark) Technical Data of Base Machine: Tunnel passage width: 650 mm Tunnel passage height: 200 mm (fixed) Length of heated tunnel hood: 1400 mm Extended tunnel outfeed: approx. 500 mm Working height, adjustable: 800 - 900 mm Product transport: rod chain conveyor, silicone-coated rods, rod spacing 25 mm, rod diameter 12 mm Transport speed, variable: 6 - 22 m/min Drive: three-phase geared motor 0.37 kW, frequency-controlled Heater blower output: constant Airflow adjustment: sliding dampers underneath and side air flaps, externally adjustable Temperature control: electronic thermostat, switching accuracy ± 0.2°C Klodpfx Aksy Ic Hijxot Control voltage: 24 V DC Power supply: 400 V three-phase current, 50 Hz with protective earth Installed heating capacity: 18 kW (average continuous consumption approx. 40%) Power rating: 20.5 + 11.1 kVA Nominal current at 400 V: 29.6 A in standalone mode Max. total connected load: 45.6 A incl. additional three-phase connection Control cabinet position and operator side: on the left in working direction Paint finish: Kallfass anthracite

Condition: ready for operation (used), Year of construction: 2003, functionality: unexamined, total length: 1,800 mm, total height: 1,400 mm, total width: 1,000 mm, KALLFASS Shrink Tunnel COMPACT 450 SO (Used machine, year of manufacture 2003; sold as is, where is) On consignment from customer Description: Compact and economical shrink tunnel featuring the patented ring nozzle heating system with highly effective air flow regulation. Equipped with infinitely variable rod chain conveyor. The rotatable rod device prevents undesirable marks on the bottom of the packaged goods when using technical films such as Clysar ®, Cryovac ®, and others. This tunnel is particularly suited for shrinking small to medium format products with moderate throughput requirements. Comprehensive standard equipment includes: • Silicone-coated transport rods, rod spacing 25 mm, rod diameter 12 mm • Optional device for rotating transport rods • Infinitely variable speed control for the rod chain conveyor • Infinitely variable tunnel fan power, adjustable according to film quality • Energy-saving 2-stage heating system with highly effective thermal insulation of the tunnel hood • Temperature control via electronic thermostat • Adjustable tunnel clearance height • Adjustable working height Ksdpey Ic Akjfx Akxolt Technical data: Tunnel passage width: 450 mm Tunnel passage height, adjustable: 100 - 400 mm Length of heated tunnel hood: 1,400 mm Working height, adjustable: 800 - 900 mm Conveyor speed, variable: 2.5 - 12 m/min Drive: AC motor 0.25 kW Airflow regulation: Patented ring nozzle system Temperature control: Electronic thermostat Power supply: 400 Volt three-phase, 50 Hz with protective earth Installed heating capacity, 2-stage switchable: 9 + 4.5 kW (continuous operation consumption approx. 40%) Rated power: 24 kW Rated current: 36.0 A Control cabinet position and operator side: Left, in direction of operation Finish: Kallfass anthracite Additional equipment: • 300 mm cooling station with ball-bearing mounted aluminium rollers at the tunnel outlet • Special cooling fan mounted above the tunnel outlet

Condition: ready for operation (used), Year of construction: 1999, operating hours: 49,800 h, functionality: fully functional, machine/vehicle number: 10992, Complete precision stamping line ready for relocation. Centre piece is a BRUDERER BSTA 500-110B (500 kN, year 2001, Kom. 11623) equipped with Pressensteuerung Typ B control, Unidor tool and press safety monitoring system, and Raziol EBAD 4000 strip lubrication system. The line includes a sound-insulating safety cabin, finished-parts output conveyor, and HURAS HPK 1500-220 horizontal decoiler (2013). Available as a complete turnkey lot. Press Manufacturer BRUDERER AG, Frasnacht, Switzerland Machine Model BSTA 500-110B Serial / Commission No. Kom. 10992 Year of Manufacture 1999 Control System Type B Control Software Version 7.3.5 — Language: German / English Operating Hours 49,800.0 h (as shown on press control) Press Force (Nominal) 500 kN Total Weight approx. 8,700 kg CE Marking Yes — original OEM nameplate Kljdey I A U Tjpfx Akxet Sound Enclosure / Cabin Included — W 3,460 × L 2,331 × H 3,910 mm Stroke range (adjustable) 16 / 19 / 25 / 32 / 38 / 44 / 51 mm Ram adjustment range 64 mm Tool opening width (max.) 1,100 mm Bolster plate — Width × Depth 1,080 × 650 mm Ram face — Width × Depth 980 × 420 mm Baseplate opening W × D 1,060 × 200 mm Strip feed height (adjustable) 60 – 140 mm Max. strip pass-through width 250 mm Model: BBV 195 - 85 Feeding angle: 90 degrees Max. Strip thickness: 4 mm Max. Strip width: 160 mm Feed length: 0 – 85 mm Supply voltage 3 × 400 V / 50 Hz Max. connected load 66 kVA Main motor power 22 kW (AC inverter-driven) Control voltage (DC) 24 V DC Pneumatic supply 6 – 10 bar (R ½" connection) Press width (with feeder) approx. 2,471 mm Press depth approx. 1,302 mm Press height approx. 3,165 mm Including HURAS HPR 1500 220 Horizontal Decoiler (2013) Includign Raziol EBAD 4000 Strip Lubrication System Includign Unidor press and Tool Safety System Finished-parts output conveyor belt Sound-insulating safety cabin / enclosure Original technical documentation and schematics

Condition: ready for operation (used), Year of construction: 2001, operating hours: 46,500 h, functionality: fully functional, machine/vehicle number: 11623, Complete precision stamping line ready for relocation. Centre piece is a BRUDERER BSTA 500-110B (500 kN, year 2001, Kom. 11623) equipped with Pressensteuerung Typ B control, Unidor tool and press safety monitoring system, and EFD Micromat strip lubrication. The line includes a sound-insulating safety cabin, finished-parts output conveyor, PBK PE 250/200 USG coiling machine (2004), and HURAS HPK 1500-220 horizontal decoiler (2015). Available as a complete turnkey lot. Press Manufacturer BRUDERER AG, Frasnacht, Switzerland Machine Model BSTA 500-110B Serial / Commission No. Kom. 11623 Year of Manufacture 2001 Control System Type B Control Software Version 7.3.5 — Language: German / English Operating Hours 46,800.0 h (as shown on press control) Press Force (Nominal) 500 kN Total Weight approx. 8,700 kg CE Marking Yes — original OEM nameplate Sound Enclosure / Cabin Included — W 3,460 × L 2,331 × H 3,910 mm Stroke range (adjustable) 16 / 19 / 25 / 32 / 38 / 44 / 51 mm Ram adjustment range 64 mm Tool opening width (max.) 1,100 mm Bolster plate — Width × Depth 1,080 × 650 mm Ram face — Width × Depth 980 × 420 mm Baseplate opening W × D 1,060 × 200 mm Strip feed height (adjustable) 60 – 140 mm Max. strip pass-through width 250 mm Model: BBV 195 - 85 Feeding angle: 90 degrees Max. Strip thickness: 4 mm Max. Strip width: 160 mm Feed length: 0 – 85 mm Supply voltage 3 × 400 V / 50 Hz Max. connected load 74 kVA Main motor power 22 kW (AC inverter-driven) Control voltage (DC) 24 V DC Pneumatic supply 6 – 10 bar (R ½" connection) Press width (with feeder) approx. 2,471 mm Press depth approx. 1,302 mm Ksdpfx Aksy I A Rzjxslt Press height approx. 3,165 mm Including HURAS HPR 1500 220 Horizontal Decoiler (2015) Including PBK PE 250 200 USG Coiling machine (2004) Includign EFD Micromat Strip Lubrication System Includign Unidor press and Tool Safety System Finished-parts output conveyor belt Sound-insulating safety cabin / enclosure Original technical documentation and schematics

Condition: ready for operation (used), Year of construction: 1995, functionality: unexamined, total length: 1,860 mm, total height: 1,500 mm, total width: 800 mm, type of input current: three-phase, input voltage: 400 V, input current: 27 A, power: 12 kW (16.32 HP), input frequency: 50 Hz, nominal power: 13 kW (17.68 HP), Thermal Shrink Tunnel HV 400 - Used machine, built in 1995 - Inspected, tested, and fully operational This high-performance shrink tunnel is designed for energy efficiency. The heating system and adjustable settings are highly variable, allowing for precise shrinking of film-wrapped products with various shapes and contours. Operating principle The thermal shrink tunnel operates with separate blowers for independently adjustable upper and lower heating. The machine is equipped with an electronic temperature controller and is designed for a maximum internal temperature of up to 250 °C. The conveyor speed is infinitely variable. Technical data Passage width: 400 mm Passage height: 130 mm Klsdpfx Aoy H Dxkjkxet Hood length: 1,000 mm Conveyor length: 1,860 mm Rod conveyor: Rotating rods with silicone coating, every second rivet fitted Power supply: 380 V three-phase, 50 Hz Heating capacity: Selectable from 2 - 10 kW Connected load: 12 kW Color: Hammertone light grey Additional equipment: Temperature control with electronic regulator and contactless relay for precise temperature consistency Pressure rollers at the discharge end

Condition: ready for operation (used), Year of construction: 2008, functionality: unexamined, type of input current: three-phase, input voltage: 400 V, input current: 27 A, power: 19 kW (25.83 HP), input frequency: 50 Hz, nominal power: 19 kW (25.83 HP), heating capacity: 18 kW (24.47 HP), Beck Packautomaten HV601 HPLS Year of manufacture: 2008 Pass-through width: 600 mm Pass-through height: 420 mm with pressure rollers at the outfeed Transport rods: 15 mm with 19 mm silicone coating Rod pitch (center to center): 38 mm Klodpfey H Ddasx Akxet Hood length: 1700 mm Overall length: approx. 2100 mm Conveyor speed: infinitely adjustable Connected load: 19 kW As shown in the photos

Condition: like new (used), Year of construction: 2020, power: 12 kW (16.32 HP), Internal dimensions: Width 1350 mm - Height 1900 mm - Depth 1350 mm. Working temperature: 100°C, uniformity ±5°C, empty oven, stabilized condition, measured 150 mm from the walls and 300 mm from the door. Maximum design temperature: 150°C/air. Internal panels: galvanized steel. External panels: painted steel, sand color 42 for the panels and RAL 3020 red for the framework. Insulation: 60 mm rock wool. Door: 1 leaf - silicone gasket - right-hand hinges. Kodpfx Akoy Ipzmsxjlt Floor: without floor. Heating: electric - power 12 kW/contactors. Controller: ERO ELECTRONIC brand TMS microprocessor type. Setpoint and temperature display - PID control. Calibrated type K thermocouple. Process timer with indicator light; temperature reached and end of timer (cycle) - Type Timer 815. Temperature safety: heating shut-off, audible and visual alarm in case of temperature overrun, restart after fault acknowledgment. Automatic start/stop timer. Internal ventilation: Flow rate: 6600 m3/h - Motor power: 1.5 kW. Exhaust: 1 extraction port, 100 mm diameter. Intake: 1 intake port + metal mesh filter. Electrical cabinet: Power supply voltage 3 x 400 V, 50 Hz. Control circuit voltage 110 VAC. Locked with RONIS key (1242 E or triangle). Wiring of all components is in compliance with CE - EN 60204 standards. Electrical components are from the following brands: TELEMECANIQUE, SOCOMEC, MAF, LEGRAND. • Equipment available for inspection near LYON.

Condition: ready for operation (used), Year of manufacture: 1988 / Overhauled in 2019 by HYDAC Accessoirs with a completely new control system Load capacity: 2,000 kg Table diameter: 1,500 mm Band width: max. 100 mm Band thickness: 0.3 – 1.0 mm Maximum coil height (incl. pallet): approx. 850 mm Number of pinch rollers: one pair Ksdpfoy Hlgpsx Akxjlt Weight: approx. 2,200 kg Dimensions: approx. 2,600 x 2,100 x 1,700 mm Execution/features: • Sturdy welded frame construction • Coil hold-down plate • Large band deflection roller • Deflection roller and pinch rollers hydraulically height adjustable • Motor-driven pinch rollers with lateral band guide and roller cage • Deadman switch for safe band threading during setup operation at safe speed • Direction of operation (forward/reverse) selectable via hand switch • Continuously adjustable pulling force via potentiometer • Loop control system • Free-standing control cabinets with operator panels

Condition: good (used), Year of construction: 2006, functionality: fully functional, Two different sets of machines. Sold separately or together. Will sell to best offer. The two machines are: 1) Fully functional LISEC Year 2006 Insulating Line for max. Glass sizes 3500 mm. X 2700 mm. The line includes: - Washing Machine VHW-27/6 - RTV RTV-27/27MZ - Argon Press FPS-36/27US - Sealing Robot VL-1NS/27 (both SIlicone and Polyurethane) - DOS DOS-1PU+SI - Spacer Bending Machine BSV-30/K Klsdpfoyx I E Ssx Akxst - Desiccant filler A1RL - LISEC HARP Racks. In total theer are 14 Racks. 2) Cutting Machine Year 2003 model: ESL-RS-S+VB. Cuttin line is visible on the video

Year of construction: 2004, condition: excellent (used), pneumatic race LARIUS 10:1 For sale pneumatic press from the renowned company LARIUS, manufactured in Italy. The device is designed for pressing high-viscosity liquids - ideal for greases, adhesives, industrial paints, silicones, etc. Technical data: • Ratio: 10:1 • Max. liquid pressure: 70 bar / 1015 psi • Air working pressure: 3–7 bar (40–100 psi) Klsdpfx Akjwqx H Rexet • Capacity: 12 l/min at 60 cycles (3.2 gal/min) • Year of manufacture: 2004 • Production: LARIUS - Italy Very good condition

Condition: used, Year of construction: 1998, machine/vehicle number: 000373, Comm. no.: Lg 34723 Double decoiler LORENZ HH 2000.2 Used, in good condition year of construction 1998 - machine no. 000373 with - hydraulic spreading and automatic retensioning - belt center adjustment manually via spindle - counterholder with quick clamping - circular protection ring - easily exchangeable clamping cylinder (service-friendly) - manual swiveling - direction of rotation changeover (top-bottom unwinding) load capacity max. 2.000 kg/side strip width max. 300 mm Coil inner diameter approx. 360 to 420 Coil inner diameter approx. 460 to 520 mm Coil outer diameter max. 1,800 mm with drive via three-phase geared motor and pneu. brake. Kjdpsnbdyaefx Akxelt drive power approx. 2.2 KW/side Unwinding speed approx. max. 40 m/min. Coil limitation via fixed limiting ring at the rear and adjustable counterholder (with quick clamping) at the front. Coiler stand with base frame with lateral shifting for coil center positioning. Currently without electric control. Can be re-engineered and offered on request.

Condition: used, functionality: fully functional, Year of construction: 1992, Ref. No.: Lg 35325 Single-sided decoiler PBK E 1200 Used, in good condition Year of manufacture: 1992 Technical data Load capacity approx.: max. 1,200 kg Strip width: max. 300 mm Expansion range: approx. 360 to 420 mm Outer coil diameter: approx. max. 1,500 mm Without drive, with pneumatic brake. Expansion of the supporting segments is manual via hand crank over joints. Number of supporting segments: 4 Coil side guide via heavy-duty limiting arms, can be clamped using quick-release fasteners. Klodpfsxn Tprox Akxet Uncoiler stand in robust box-type design as a welded structure.

Condition: used, Year of construction: 2007, machine/vehicle number: 001669, Lg 33121 Single side decoiler ARKU AH 3000/ST-M year of manufacture 1995 Ksdpfehigmbsx Akxslt belt width max. 600 mm load capacity max. 3.000 kg coil outer diameter max. 1.800 mm Spreading hydraulic Pressing arm hydraulic Decoiler with auxiliary drive and brake coiler chair fixed + reel traversing device with: Lg 33221 High performance belt leveler LORENZ BRM 50/620.9 year of manufacture 2007 Machine no. 001669 passage width max. 620 mm number of straightening rolls 9 Straightening roll diameter 50 mm Material density 0.7 to 6.0 mm Straightening rolls supported several times against deflection All rolls driven by transfer gearboxes and cardan shafts. cardan shafts. Used, in as-is condition from stock, available immediately. On request with overhaul. Delivery time by agreement. Further data shortly or on request.

Year of construction: 2024, condition: used, Manufacturer : IMMEQUIP Engineering Model : CEMH-LAM360 Year : 2024 Type : Cutter / Laminator Structure & design: All-stainless steel 304L mechanically welded frame Fitted with 4 swivel wheels with brakes Fully enclosed machine (compliant with 2006/42/EC) Access secured by coded magnetic sensors Dimensions Longueur totale : 3550 mm Hauteur tapis entrée : 1025 mm (±15 mm réglable) Hauteur tapis sortie : 737 mm Largeur bandes : 360 mm Convoyage : Tapis d’entrée - Bande NEOBELTING silicone blanc - Température max : 90°C en continu - Vitesse : 17 m/min - Motorisation : 0,37 kW – triphasé 400V - Option fournie avec la machine : guidage produits par peigne inox + rouleaux presseurs (voir photo) Conveyor system: Exit conveyor - White silicone NEOBELTING belt - Speed: 43 m/min - Motor: 0.37 kW – three-phase 400V - Integrated air blow-off ramp Cutting unit - Cutting wheel Ø350 mm - 3 blade holders (45° and 90°) - Hardened and ground steel blades (Z30C13 – 40/42 HRC) - Rotation speed: 72 rpm - Motor: 0.37 kW – three-phase 400V Klsdpfx Aoy D Ugyjkxot - Stainless steel housing with adjustable pressure roller - Stainless steel roller guide - Cutting kit options: 90° and 45° Product orientation kit: 2 symmetrical sets, each comprising 1 cell, 1 stop flap and 1 pneumatic cylinder Laminating / rolling function - Hollow stainless steel roller, Ø140 x 350 mm - Motor: 0.12 kW - Speed: 29 m/min - Precise gap adjustment (1 to 30 mm) - Adjustable anti-clogging scraper Conveyor system: Intermediate conveyor - HABASIT belt, type WVT-140 - Speed: 29 m/min - Motor: 0.18 kW - Stainless steel drum, Ø44 mm - Tension and position adjustment Power supply: Three-phase 400V – 50 Hz SIEMENS G120C frequency converters (x5) SIEMENS 7-inch operator display (HMI) Full machine control Buzzer + power-on indicator light Emergency stop buttons (including 1 on the cutting unit side) Technical documentation available

Condition: refurbished (used), Year of construction: 1999, functionality: fully functional, drawing speed: 10,000 mm/s, inner diameter: 600 mm, load capacity: 3,000 kg, wire diameter (max.): 14 mm, Year of manufacture 1999 Maximum speed 10 m/s Total installed power 230 kW Key status Complete electrical modernization TEUREMA EHS-110 wire drawing line, a heavy-duty industrial machine equipped with a Tecno Impianti drawing bench and designed for reliable production performance. The line has undergone a complete electrical modernization, including a new main electrical cabinet, Siemens S7-1500 PLC, Siemens HMI 1200, 100% new wiring and new push-button stations, significantly improving reliability, maintenance and overall operation. Line configuration Pay-off stands 2 tilting pay-off units. Maximum coil weight per unit: 3,000 kg. Vertical pay-off tower 6-meter tower with lifting and lowering carriage operated by hoist. Descaler Mechanical descaler. Lubrication box 1.5 kW motor at 1,500 rpm. TECNO IMPIANTI drawing bench 2 passes. Double-ring capstan: Ø 610 mm and Ø 760 mm. 3-speed gearbox: 3.90 / 7.20 / 10.00 m/s. Power: 160 kW. Frequency: 50 Hz. Horizontal coiler Horizontal drive. Maximum coil weight: 3,000 kg. 2-speed gearbox: 7.3 / 10.0 m/s. Maximum coil diameter: Ø 1,200 mm. Core diameter: Ø 600 mm. Useful spool width: 900 mm. Power: 45 kW. Technical data • Incoming wire diameter: 5.5 to 14 mm • Outgoing wire diameter: 4 to 12 mm • Number of blocks: 1 vertical • Maximum line speed: 10 m/s • 2 x CL30 A 33 Eurolls cassettes • Rollers: Ø 150 x Ø 90 x 15/20 mm • Total machine power: 230 kW • Frequency: 50/60 Hz Electrical and automation upgrade • Completely new main electrical cabinet • Siemens S7-1500 PLC • Siemens HMI 1200 • 100% new wiring • New push-button stations This line combines the strength of a proven industrial machine with a complete upgrade of its electrical and control systems, making maintenance easier, improving reliability and simplifying integration into modern production environments. Available services • Installation Klsdpfx Akey Ex Ecoxot • Assembly • Commissioning • Technical assistance TEUREMA EHS-110 wire drawing line, manufactured in 1999, equipped with a Tecno Impianti drawing bench and capable of operating at speeds of up to 10 m/s. The machine features a complete electrical modernization with a new main electrical cabinet, Siemens S7-1500 PLC, Siemens HMI 1200, completely new wiring and new push-button stations, offering a robust, reliable and production-ready industrial solution.

Condition: used, Year of construction: 2010, Used machine Year of manufacture: 2010 Features and technical data: Right-hand version 2 auxiliary tables are still in original packaging H&H / HARDO TH 1020-V46 BV DA (twin system) Maximum application width: 2,040 mm (2 × 1,020 mm) Design: Twin system, both machines can also be operated individually Application roller: reinforced version Application roller diameter: 46 mm Kjdpfx Asy E Avlokxjlt Application roller knurling: 0.5 mm Bearings: reinforced roller bearings Bearing shells: hardened Scraper: pneumatically actuated, needle bearings Main bearing lubrication: routed externally, to be filled with a manual grease gun Container seal: adjustable and replaceable without removing the application unit Application speed control: via frequency converter Speed range: 3.2 – 19.3 m/min Control: potentiometer Display: digital speed display Pressure rollers: 2 pieces, silicone-coated Pressure roller length: 2,040 mm Pressure roller diameter: 159 mm Pressure roller actuation: pneumatic Automatic lowering of pressure rollers when drive motor is switched off Height adjustment for material clearance: electromechanically, manual inching mode Applicator unit stroke: 0 – 200 mm Conveying height: 925 mm (underside of material) Pressure roller drive: separate drive Motor: including motor mounting, fastening, and enclosure Additional application speed control: via separate frequency converter Additional speed range: 3.2 – 19.3 m/min Additional control: potentiometer Additional display: digital speed display Base frame: aluminium profile system Stands: 2 pieces, anodised aluminium plates Adjustable feet: adjustment range ±25 mm Material feed direction: right to left Heating control: programmable timer (daily and weekly program) Temperature control: electronic with digital actual value display Melt tank capacity: 2 × 25 litres Heating power: 2 × 8.0 kW Nominal power: 18.5 kW Control voltage: 24 V Nominal frequency: 50 Hz Operating voltage: 400 V Phases: 3 Fuse: 63 A Compressed air connection: < 8 bar Application: Melting and applying non-reactive hot-melt adhesives Weight: 1,560 kg Availability: short-term Location: Rhineland-Palatinate

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 10900 € 209.28 € 1250 kg 1300 mm Kljdpowv H Awsfx Akxet 450 - 550 mm 400 mm 80 mm motorized drive mechanical adjustable coil mandrel with 4 jaws speed control for decoiling speed aswell as acceleration- and deceleration times photoelectric proximity ensor SICK for sag control with pneumatic downholer Alternatives (prices on request): Version without pneumatic pressure arm Version with brake, without motor, with or withaout pneumatic pressure arm

Condition: new, Year of construction: 2026, neu 2026 070217 Juni 2026, Zwischenverkau Türkei 4800 € 500 kg 1200 mm 400 mm 550 mm 300 mm 50 mm 80 mm 0.55 kW 1400 mm 1200 mm 1550 mm 190 kg motorized drive Kedewirz Sopfx Akxjlt mechanical adjustable coil mandrel with 4 jaws speed control for decoiling speed aswell as acceleration- and deceleration times photoelectric proximity ensor SICK for sag control ALTERNATIVES (prices on request): Version with pneumatic pressure arm Version with brake, without motor, with or withaout pneumatic pressure arm

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 19100 € 366.72 € 4000 kg 1300 mm 450 - 550 mm 600 mm 50 mm 80 mm motorized drive mechanical adjustable coil mandrel with 4 jaws speed control for decoiling speed aswell as acceleration- and deceleration times Kjdpfx Akewirz Eoxslt photoelectric proximity ensor SICK for sag control ALTERNATIVES (prices on request): Version with pneumatic pressure arm Version with brake, without motor, with or withaout pneumatic pressure arm

Condition: new, Year of construction: 2024, neu 2024 7314 prompt, Zwischenverkauf v Türkei 14800 € 284.16 € 1 2500 kg 1300 mm 450 mm 550 mm Kedpfswirrkex Akxelt 600 mm 80 mm 1600 mm 1550 mm 2000 mm 580 kg motorized drive mechanical adjustable coil mandrel with 4 jaws speed control for decoiling speed aswell as acceleration- and deceleration times photoelectric proximity ensor SICK for sag control Pneumatic downholder ALTERNATIVES (prices on request): Version without pneumatic pressure arm Version with brake, without motor, with or withaout pneumatic pressure arm

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 8200 € 158.26 € 1250 kg 1300 mm Kodpfswirp Asx Akxelt 450 - 550 mm 400 mm 50 mm 80 mm motorized drive mechanical adjustable coil mandrel with 4 jaws speed control for decoiling speed aswell as acceleration- and deceleration times photoelectric proximity ensor SICK for sag control ALTERNATIVES (prices on request): Version with pneumatic pressure arm Version with brake, without motor, with or withaout pneumatic pressure arm

Condition: new, Year of construction: 2026, neu 2026 070155 prompt, Zwischenverkauf v Türkei 6900 € 133.17 € Ksdpfswirmuex Akxslt 1 500 kg 1200 mm 400 mm 550 mm 300 mm 80 mm 1450 mm 1200 mm 1640 mm 260 kg motorized drive mechanical adjustable coil mandrel with 4 jaws speed control for decoiling speed aswell as acceleration- and deceleration times photoelectric proximity ensor SICK for sag control PNEUMATIC PRESSURE ARM ALTERNATIVES (prices on request): Version without pneumatic pressure arm Version with brake, without motor, with or withaout pneumatic pressure arm

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, CEROX 1000 Hot Stamping / Thermal Transfer Printing Machine — 1999 Brand: CEROX Model: 1000 Year: 1999 Type: Thermal transfer printing machine Cycle counter: 130,342 cycles Compatible surfaces: Cylindrical, oval, and irregular shapes (ideal for bottles and jars) Controller: Telemecanique Dimensions: 1,900 x 2,500 x 1,870 mm Includes: ✅ Aluminium tooling ✅ Silicone tooling ✅ Consumables and spare parts ✅ Sample engravings Condition: Good Location: Albacete, Spain Available for inspection by appointment Kedpfx Ajy Eyicskxolt VAT invoice available

Condition: used, -Model: NG 144 -Capacity: 90 to 252 baguettes -Trolley dimensions: 600x800 mm -Dimensions (LxWxH): 1500x1560x2200 mm -Year: 2000 -Serial No.: 144NGA035 -High-grade top hanging hook -Power: 2 kW -Heating capacity: 90 kW -Voltage: 400 V -Weight: 1,320 kg -Suitable for baking bread, pastry, and viennoiserie -Burner: C10 gas -Insulated with rock wool panels -Double glazed 8 mm, tempered 'Securit' glass -400 mm stainless steel access ramp Lrey Tdewxl H Hoxugsr Kodpfxswxl H He Akxolt -Equipped with steam evacuation valves -Fully stainless steel refractory heat exchanger -2 steam units for optimal distribution over the products -4 heat distribution turbines for improved baking -Front, hood, and extractor made of stainless steel -Stainless steel sheathed heating elements -High-temperature resistant silicone electric wiring harnesses.

Condition: used, functionality: fully functional, Year of construction: 2020, total length: 950 mm, total height: 1,360 mm, total width: 700 mm, overall weight: 188 kg, feed length X-axis: 297 mm, feed length Y-axis: 210 mm, feed length Z-axis: 200 mm, We are offering this ready-to-use Keyence AGILISTA-3200W. All maintenance has been carried out by Keyence. A full service was recently performed by Keyence, and the printer has been in standby mode since. The printer is in excellent condition. Complete accessory set for immediate operation included: - 1x cartridge of print material - 1x cartridge of support material - 3x waste containers - 1x rinse tank for printed parts - Cleaning kit for parts and printer Viewing by appointment possible. On-site introduction/training available upon request. Technical specifications: - Print material: AR-M2 (transparent print material), AR-H1 (heat-resistant print material), AR-G1L (silicone rubber [low hardness]), AR-G1H (silicone rubber [high hardness]) - Support material: AR-S1 (water-soluble support material) Kodpfxey Hmhhj Akxolt - Build volume: 297 × 210 × 200 mm (DIN A4 size × 200 mm) - Resolution: 635 × 400 dpi - Layer thickness: High resolution AR-M2: 15 µm, standard resolution AR-M2: 20 µm, AR-H1: 20 µm, AR-G1L/H: 30 µm - Interface: Ethernet 10BASE-T / 100BASE-TX - Operation: color touch panel - Dimensions: 95 x 70 x 136 cm - Weight: 188 kg If you have any questions or require further information, please feel free to send us a message or give us a call.