Used Sma Sunny Tripower Stp 25000Tl-30 for sale (25,605)

Condition: new, functionality: fully functional, power: 90 kW (122.37 HP), Year of construction: 2026, Plastic squeeze dryers are a vital part of plastic film washing lines. Nwjdpfx Aswg Sd Ujbzsi Washed films retain up to 30% moisture normally after exiting the wash process. High humidity will be affecting the efficiency and production of the following extrusion pelletizing process. Having a plastic squeeze dryer is a must to dehydrate the washed film, increase the density of recycled film and fibre materials, increase the capcity of the following extrusion process and further refine the quality of final plastic pellets. Even the water-washed plastic film processed through a spin-dryer still contains over 10% moisture which would significantly reduce the productivity of the extruder and quality of pellets. The latest development for drying and recycling washed film are plastic film squeeze dryers which could reduce moisture to the minimum and the squeezed material only contains maximum 3%, and more usually 1%, residual moisture. Much cheaper to operate than hot air drying , and better result as the output materials are continuously agglomerated direct from washing lines with +40% fluids to dense free flowing agglomerate. In this form it is not necessary to have cutter compactor extruders, as the materials are so dry and dense they can be fed direct to extruders for pellet production.With over 30 years of producing recycling dryers and extruders GENIUS have sold more than 600 of these driers to the plastics recycling market. ..There are 4 models in the range with production between 250 kgs per hour up to 1200 kgs per hour.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, power: 3 kW (4.08 HP), input voltage: 400 V, input current: 5 A, input frequency: 50 Hz, Equipment: CE marking, documentation/manual, For sale: Losman air cleaning units in excellent condition, suitable for applications such as removing oil mist generated in metalworking. The cleaned air is returned to the workspace, and the condensed coolant collected during filtration can be recycled. There are 2 units available, one of which is from 2014. Both units have had their filters replaced. Nodpsyk Sknefx Abzewi

Condition: excellent (used), Year of construction: 2008, clamping force: 1,300 kN, screw diameter: 55 mm, displacement volume: 523 cm³, injection pressure: 1,904 bar, injection weight: 479 g, mold height (min.): 300 mm, Clamping force: 130 t Year of manufacture: 2008 Shot weight: 475.9 g Injection unit 1000 Screw diameter: 55 mm Specific injection pressure: 1904 bar Injection volume: 523 ccm Shot weight: 475.9 g Clamping force: 130 t Mould platen dimensions: 745 x 745 mm Tie bar spacing: 470 x 470 mm Ejector force: 22.6 kN Mould height: 300 mm Opening stroke: 600 mm Max. platen distance: 900 mm Weight: 8,000 kg Year of manufacture: 2008 Control: MC5 Equipment: - accumulator - euromap 67 interface Nwjdjynzrpjpfx Abzei - 2 x pneumatic valve - hydraulic core on moving platen

Condition: new, Year of construction: 2024, neu 2024 2517 prompt, Zwischenverkauf v Deutschland 36720 € 701.35 € 1 1500x3000 mm Hypertherm Powermax 125 25 mm 25 mm 57 mm 25 mm 125 A 24 m/min 1/10 mm 400 kg/m² 3560 mm Njdpfxewva Iae Abzjwi 1960 mm 1500 mm 650 kg DEMO MACHINE compressed air powered plasma sourceHYPERTHERM Powermax 125 CNC-workbench software (external PC not included) Height adjustment by arc voltage Set-up laser precision profile rail guide(HiWin) zero backlash HTD drive belt driven by step motors solid frame construction seperate renewable support grate water trough to catch flying sparks hand operation unit for comfortable processing and set up on the workpiece users manual in GERMAN according to CE rules INCL. FOLLOWING OPTION: Suction bridge (prepared for suction diam. 160 mm)

Year of construction: 1998, operating hours: 297 h, condition: ready for operation (used), functionality: fully functional, saw blade diameter: 200 mm, rotational speed (max.): 3,000 rpm, screw diameter: 35 mm, machine/vehicle number: E0195/10, No reserve price – guaranteed sale to the highest bidder! Single-screw extruder with only 297 operating hours, including cutoff saw and haul-off unit! Hussmann ES35 x 30D Njdpfx Abeyrmzqozewi TECHNICAL DETAILS Screw diameter: 35 mm Length: 30D MACHINE DETAILS Motor power: 16 kW Operating hours: 297 h Cutoff Saw TECHNICAL DETAILS Three-phase motor speed: 3,000 rpm Three-phase motor output: 0.55 kW Saw blade diameter: 200 mm Haul-off Unit TECHNICAL DETAILS Haul-off speed: 20/30/40/50/60 m/min Haul-off force: 11,700 / 7,800 / 5,800 / 4,700 / 3,900 N Contact length: 800 mm Max. belt width: 160 mm Max. profile height: 160 mm MACHINE DETAILS Drive power: 2 - 5.6 kW Weight: 800 kg EQUIPMENT Complete electrical and electronic control system with remote control box Digital speed display Ammeter 10-step helical potentiometer

Condition: new, Year of construction: 2026, The Marinus Powermax Endmatcher is designed for head-end machining tongue and groove on parquet floorboards, decking and cladding, producing fixed and variable lengths. It can be used for any type of wood; hardwood, softwood, or engineered wood. The machine can cut to length, cut out defects, and do head-end profiling, all in a single pass of the wood through the machine. When feeding wood into the machine, it is possible to mark defects, like knots or cracks, with a luminescent crayon. The machine will cut out these defects, including the crayon lines. Lengths: 450 - 6000+ mm Widths: 50 - 300 mm (optional width of 400mm or 500mm) Thicknesses: 8 - 45 mm Capacity: up to 20 pc/min Length modes: Variable / Fixed / Round. This machine is engineered and built in our company in The Netherlands and will be delivered new from our factory. This machine is equipped with an online remote support system. We provide customer support worldwide. This listing on Machineseeker is also made by us: Marinus Machinery. Nwsdpef Hkgpjfx Abzei

Condition: good (used), clamping force: 3,000 kN, Manufacturer: KraussMaffei Model: KM 300-1400 C2 Machine type: Hydraulic injection moulding machine Year of manufacture: 1999 Clamping force: 3000 kN International size designation: KM 1400 C2 / 300 Nwedpfxsytnnzs Abzei Machine weight: 12,500 kg CE marking: present 2 units available Further information on request.

Condition: used, Year of construction: 2020, operating hours: 24,259 h, functionality: limited functionality, machine/vehicle number: 7633193000003100, power: 216 kW (293.68 HP), overall weight: 4,500 kg, total width: 1,900 mm, total length: 6,000 mm, total height: 1,700 mm, type of input current: three-phase, pressure: 6 bar, control cabinet height: 1,600 mm, control cabinet length: 400 mm, control cabinet width: 1,000 mm, temperature: 100 °C, operating pressure: 6 bar, Equipment: hot water, type plate available, For sale: Viessmann Vitoflex 300-UF Wood Chip Heating System (2020) – 216 to 720 kW. Highly efficient wood chip heating system for industrial applications with exceptionally low emissions. Ideal for agricultural operations, industrial heating systems, or municipal district heating and local heating networks. The complete system includes: • Fine dust filter for ultra-low-emission combustion (Schräder exhaust gas technology Nat E-Filterbax-4-D300) • Automatic fuel feeding system • Control cabinet and control unit Nedpfsxvb Tbox Abzswi • Professionally maintained – excellent condition Technical specifications: • Manufacturer: Viessmann • Model: Vitoflex 300-UF • Output: 216 – 720 kW • Year of manufacture: 2020 • Operating hours: approx. 6,000 – 8,000 h (mainly operated during winter months) • Fuel: Wood chips Additional information: • Complete technical documentation and maintenance records available upon request • Dismantling and transport can be arranged by agreement • Used system, sale as seen, without warranty Location: Netherlands Viewing by appointment possible.

Condition: new, functionality: fully functional, mileage: 1 km, power: 18.39 kW (25.00 HP), gearing type: automatic, fuel type: diesel, fuel consumption per hour: 1.1 l/h, color: yellow, overall weight: 1,230 kg, empty load weight: 1,230 kg, operation weight: 1,230 kg, maximum load weight: 670 kg, lifting power: 670 kg/m, tire condition: 100 %, drive condition: 100 %, chain condition: 100 %, number of seats: 1, emission class: euro5, shovel volume: 0.16 m³, Year of construction: 2025, machine/vehicle number: 123, Equipment: additional headlights, cabin, head guard, The GG300K is a versatile skid steer loader that combines reliability, power, and modern technology. Ideal for light to medium-duty tasks, it offers precise control and robust performance on challenging terrain. Engine and Drive System Powered by a Kubota D1105 water-cooled three-cylinder engine with a displacement of 1.123 liters, producing 25 hp (18.4 kW) at 3000 rpm. Fuel consumption ranges from 1.3 to 1.5 l/h, ensuring economical operation. The oil change quantity is approximately 4 liters. Hydraulic System Equipped with Hengli V90C23HT1 and Tianjin Walking 316 pumps (each delivering 48 l/min) operating at a pressure of 16 MPa. The pilot-operated multiway valve ensures accurate control, while the Hengli BMER-600 motor with a displacement of 600 ml provides efficient drive on rough terrain. Performance and Capacity With an operating weight of 1230 kg and a rated load capacity of 300 kg, the GG300K is suitable for medium-duty construction and agricultural tasks. It offers a gradeability of 30%, a tipping load of 670 kg, and a bucket capacity of 0.16 m³ for efficient material handling. Dimensions and Maneuverability Transport dimensions are 2655 mm in length (with bucket), 1985 mm in length (without bucket), 1000 mm in width, and 1810 mm in height. The maximum loading height is 2260 mm, the dump height is 1725 mm, and the ground clearance is 176 mm, providing versatile usability. Specification Engine brand: Kubota Engine model: D1105 Maximum power (horsepower): 25 hp Maximum power: 18.4 kW Maximum speed: 3000 rpm Displacement: 1.123 liters Number of cylinders: 3 Cooling method: Water-cooled Nwsdoxy Tdyopfx Abzei Theoretical fuel consumption: 1.3-1.5 L/h Hydraulic oil tank capacity: 32 liters Fuel tank capacity: 32 liters Gear pump brand: Tianjin Walking Gear pump model: 316 Main pump brand: Hengli Main pump model: Closed pump V90C23HT1/RNB2S12KA1-LP01 Maximum main pump flow: 48 L/min Multiway valve: Pilot-operated Rated pressure setting: 16 MPa Hydraulic travel motor type: Hengli BMER-600 Travel motor brand: Hengli Drive motor displacement: 600 Performance Range Operating weight: 1230 kg Safe load capacity: 300 kg Maximum load capacity: 670 kg Bucket capacity: 0.16 m³ Travel speed: 8 km/h Gradeability: 30% Bucket width: 1000 mm Main Dimensions Transport length – with bucket: 2655 mm Transport length – without bucket: 1985 mm Transport width: 1000 mm Transport height: 1810 mm Maximum dump height: 1725 mm Maximum loading height: 2260 mm Maximum dump reach: 508 mm Minimum ground clearance: 176 mm

Condition: new, rated capacity 30 / 37,5 KW /KVA output voltage 1 x 230AC / 1 x 400AC 50 Hz engine 4 Zylinder Ricardo tank capacity l weight of the machine ca. 900 Kg dimensions 2,0 x 1,0 x 1,2 m Powerful diesel generator Nwodpfxou Imiao Abzoi - Electric starter - Output: 1 x 400 volts/AC, 1 x 230 volts/AC

Year of construction: 2025, condition: new, functionality: fully functional, High Speed · High Precision · High Stability The VS series high-speed laser tube cutter for small pipes has arrived! This machine features a high-precision chuck system designed specifically for tube cutting. With excellent sealing and dust protection, it delivers clamping accuracy within ≤0.1mm ideal for ultra-precise small tube processing. Nodpswwzudefx Abzowi The chuck rotates up to 160 RPM, with acceleration reaching 1.5G, easily enabling high-efficiency processing of small-diameter tubes. easily enabling high-efficiency processing of small-diameter tubes. it supports true ultra-short tail cutting saving cost from the very beginning. Available in 3000W and 6000W, Handles square and round tubes from 10mm to 120mm in diameter, Also capable of cutting angle steel, channel steel, and I-beams A true all-rounder for small pipe fabrication. Supports automatic or semi-automatic loading Effortlessly enables smart and automated processing. One machine replaces three workers — A powerful and efficient tool for small pipe manufacturing!

Year of construction: 2024, condition: new, - 150 mm infeed high - 430 mm infeed width - 30 mm chips - 2 knives - 440mm diameter Rotor - 590 U/min Rotor - 30 m/min Feed speed - 37 KW Mainmotor - 3 KW + 2,2 KW infeed roller Gearboxes - 6.000 mm conveyor belt Nwjdpfx Absful Uiozsi - 2.000 mm discharge conveyor belt

Condition: excellent (used), Year of construction: 2012, 1,0 St. gebr. Spritzgießmaschine Hersteller: KRAUSS MAFFEI Typ: KM420-4300CX Baujahr: 2012 Schließkraft: 420 Tonnen Holmabstand 800 x 800 mm Schnecken DN: 80 mm Max. Hubvolumen: 1.810 cm³ Spritzteilgewicht: 1.647 g/PS Nedpfeyak Ecex Abzswi Steuerung: MC6 Ausstattung: 2 St. Kernzug Schnittstelle Roboter 12- Fach Heisszonenkanalregelung Schnittstelle Temperiergerät

Condition: excellent (used), Year of construction: 2011, operating hours: 28,000 h, functionality: fully functional, clamping force: 1,300 kN, For sale is a hybrid injection molding machine, 2 components, of the brand KraussMaffei and type KM 130-750 CX The machine is in very good condition, ready for immediate use, with low operating hours. Electronic injection unit and dosing unit, hydraulic clamping unit. Technical data: Year of construction: 2011 Operating hours: 28,000 h Clamping force: 130 T Cylinder Ø 30mm / 40 mm (& 2*50mm additional) Core pull: 1*Hydraulic Valve gate: Pneumatic Tie bar extension: 160 mm Internal pressure transducer Selector switch On request, transportation and loading can be organized at an extra charge. can be organized throughout Europe. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website Nwedou Hxm Uspfx Abzoi

Condition: used, Year of construction: 2006, Injection moulding machine Krauss Maffei KM 800-4300 MX, year 2006 The machine is equipped as follows: - 5 hydraulic cascade controls - Injection unit with a 90 - MT5 control system - Krauss Maffei handling system - 2 conveyor belts Njdpfx Absw Hwr Djzswi

Condition: used, Year of construction: 2010, Injection moulding machine Krauss Maffei KM 650-4300, year 2010 Nodsw Hwthopfx Abzjwi

Condition: used, Year of construction: 2015, Mazak Vertical Centre Smart 530C CNC Vertical Machining Centre with Mazatrol Matrix 2 Control. S/No. 259026 (2015), Table Size 1300mm x 550mm, Spindle Speed Max 12,000rpm, 30 Tool Drum Type ATC Fitted with Various Tool Holders and Renishaw Probe, CAT40 Spindle Taper, LNS Turbo MH500 Swarf Conveyor, Machine Weight 6800kg, User Manual on CD. Country of Origin: United Kingdom Location: These lots are located in Gateshead, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described. Nsdpfxjznllxs Abzswi

Condition: used, Year of construction: 2015, Mazak Vertical Centre Smart 530C CNC Vertical Machining Centre with Mazatrol Matrix 2 Control. S/No. 264426 (2015), Table Size 1300mm x 550mm, Spindle Speed Max 12,000rpm, 30 Tool Drum Type ATC Fitted with Various Tool Holders and Renishaw Probe, CAT40 Spindle Taper, LNS Turbo MH500 Swarf Conveyor, Machine Weight 6800kg, User Manual on CD. Country of Origin: United Kingdom Nsdpjznlllofx Abzjwi Location: These lots are located in Gateshead, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: used, Year of construction: 1995, functionality: fully functional, controller model: DNC 80, degree of automation: manual, Jonescheit Hytap 30 with DNC 80 – robust press brake featuring proven control system For sale is a Jonescheit Hytap 30 equipped with DNC 80 control. This is a robust and reliable press brake suitable for use in both workshop and production environments. The machine is designed for precise bending operations and stands out due to its solid construction and user-friendly operation via the DNC-80 control unit. It is an attractive solution for companies seeking a fully functional and immediately available press brake. Specifications: Manufacturer / Model: Jonescheit Hytap 30 Control: DNC 80 Year of manufacture: 1995 Type: manual Condition: used, fully functional Notes: Nwodoyxakyspfx Abzoi The machine is sold without tooling. Inspection and test run on site are possible. Condition: Used and ready for operation. Conclusion: A solid press brake for operators seeking a field-proven machine with DNC control. Ideal for on-site inspection and functional testing.

Condition: used, mileage: 97,420 km, power: 243 kW (330.39 HP), first registration: 10/2012, overall weight: 21,500 kg, fuel type: diesel, color: orange, axle configuration: 2 axles, gearing type: mechanical, emission class: euro5, loading space length: 5,500 mm, total length: 7,600 mm, total width: 2,500 mm, total height: 3,350 mm, Equipment: ABS, air conditioning, all wheel drive, * Iveco Trakker AD 190T33W/P, Palfinger Abroller T 10, Winterdienstfahrzeug, wenig Laufleistung * Abroller Palfinger T 10 * hydr. Verriegelung * Radstand ca. 4,50 m * Euro 5 * 8 Gang + Splitt Schaltgetriebe * Klima * Federung: Blatt/Luft * ABS * Anbauplatte vorne * hydr. SW * Zusatzbeleuchtung * Lampenbügel + 4 x Zusatzleuchten Nwjdpfx Aezpgh Rebzei * Salzstreuerhydraulik * AD-Blue * Staubox * 2 x Rundumlicht * Multifunktionslenkrad * AHK + DL- Anschlüsse * Allrad * Diffenzialsperren * 2x Luftsitz * Radio CD * el. FHFrontscheibenheizung * Rückfahrcamera * Tempomat * Bedienpult Beilhack für Anbauplatte * Reifen 385/65R22,5 ca. 80% * 315/80R22,5 ca. 80% * gegen Aufpreis mit * Salzstreuer Küpper Weisser auf Abrollsystem * Schneepflug * Abrollcontainer * deutsches Fahrzeug * Behördenfahrzeug * Laufleistungsnachweise * Netto-Verkauf innerhalb der EU wird nur noch mit MWST Kaution und dem Nachweis der Zulassung im Bestimmungsland (Gelangensbestätigung) durchgeführt, * Verkauf nur an Gewerbe, Transport zum Hafen möglich, * Dieses Angebot ist unverbindlich und freibleibend. * Irrtum und Zwischenverkauf vorbehalten. Keine Gewähr auf Eingabefehler. * Besichtigungen nur nach Vereinbarung, * WhatsApp

Condition: excellent (used), functionality: fully functional, total length: 1,205 mm, total width: 1,000 mm, total height: 1,890 mm, REF: MM6147 Nsdpex Tg Axsfx Abzowi 30 x Stainless-steel hanging racks for curing meat, previously used for hanging chorizo. These racks can be stacked one on top of each other. Overall dimensions - 1205mm long x 1000mm wide x 1890mm high. 

Year of construction: 2026, condition: new, functionality: fully functional, overall weight: 120 kg, total length: 900 mm, total width: 1,550 mm, total height: 2,050 mm, input frequency: 50 Hz, laser power: 30 W, laser wavelength: 1,064 nm, type of cooling: air, type of input current: AC, laser type: fiber laser, The universal laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. Nodpfxozntfmo Abzswi The standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the laser model LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realized. Made in Germany Fiber laser 30W, 20 W or 50 Watt - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - marking software EZCAD in German / English - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - signal light for indication of operating status - max. component height approx. 300mm - electrically adjustable Z-axis - Integrated PC with Windows operating system - frame made of aluminum profile - air cooled - Door width approx. 700mm / door height(pass-through): 400mm - Connection 230V - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) - Weight: approx. 100 Kg

Year of construction: 2025, condition: new, functionality: fully functional, The universal laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the laser model LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realized. Made in Germany Fiber laser 30W, 20 W or 50 Watt - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - marking software EZCAD in German / English - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) Nedpfx Aoznr Sxjbzowi - signal light for indication of operating status - max. component height approx. 300mm - electrically adjustable Z-axis - Integrated PC with Windows operating system - frame made of aluminum profile - air cooled - Door width approx. 700mm / door height(pass-through): 400mm - Connection 230V - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) - Weight: approx. 100 Kg

Condition: new, functionality: fully functional, Features of the Unit 1. Chain conveyor belt, 2 meters in length (other lengths available on request) 2. Adjustable bag former 3. Single film loader + automatic film centering device 4. Rotative end sealing unit, double sealing jaw 5. Robust, central fin seal structure 6. Three servo-controlled drives 7. HMI control panel 8. Two individual temperature controllers 9. Housing made of 304 stainless steel 10. Documentation in the local language 11. Print mark control 12. Programmable bag length 13. Standard running direction: left to right Technical Specifications 1. Product length: L90–300 mm 2. Product width: W30–160 mm 3. Product height: H5–55 mm Nwodoydqahepfx Abzei 4. Packaging speed: up to 125 products/min (depending on product, bag length, material, and number of sealing jaws) 5. Maximum film width: 370 mm 6. Supply voltage: 1Ph. 220V 50Hz 7. Power consumption: approx. 6.5 kW 8. Machine weight: approx. 400 kg 9. Machine dimensions: approx. 3500 x 950 x 1450 mm

Condition: ready for operation (used), Siemens 6BK1000-0AE30-0AA0 Simatic Box PC 627 - KSP EA X-MC, serial number VPW4002009, without hard drive, used, shows normal signs of wear, 100% functional, scope of delivery as shown in the photos. Nsdei Edklepfx Abzowi