Used Steinert Eddy Current Separator for sale (12,266)

Condition: new, Year of construction: 2024, machine/vehicle number: 5.3495.0, Kaeser Oil/water separator Laedpev Ta D Defx Acfof Type: Aquamat CF 6 Tested and certified condensate treatment The AQUAMAT treatment system enables the compressor operator to carry out condensate treatment in-house, thereby greatly reducing the amount remaining for disposal. An AQUAMAT can save approximately 90% of the costs associated with arranging for the full volume of condensate to be treated and disposed of by a specialist contractor, therefore the initial investment is very quickly recovered. Technical data Suitable for max. compressor delivery volume 3.8 m³/min (using: Sigma Fluid MOL or S 460; for Kaeser rotary screw compressors in climate zone 2*) Receiver volume 18.6 l Fill volume 11.7 l Condensate inlet connection 2 x G 1/2 Water drainage connection (hose diameter) DN 10 Net weight approx. 5.8 kg Permissible condensate temperature +5 to +60 °C Dimensions (W x D x H) 387 x 254 x 595 mm Specifications subject to change without notice. Factors such as compressor type and oil type must be taken into consideration when selecting AQUAMAT condensate treatment systems.

Year of construction: 2019, condition: new, machine/vehicle number: 1C331151, Oil/water separator DONALDSON Ultrasep Superplus UFS-SP10 Nominal compressor capacity (based on 1 bar absolute and 20 °C, depending on compressor design and lubricant): 120 m³/h Connection: G 1/2" Volume of the container: 25 liters Volume of the pre-adsorber: 0.9 liters Volume of the effective activated carbon adsorber: 3.2 liters Lsdpfxedbwf Ss Acfjaf

Condition: used, Permanent magnet DC servomotor INDRAMAT from MAHO milling machine Type: MDC 10.10H / MMA-0 (MDC10.10H/MMA-0) Serial No. 12423 Component No. 230837 K-M = 0.30 Nm/A Ieff = 11 A Imax. = 75 A Umax. = 170 V Laodpfx Ajznn H Ejcfof n max = Maximum speed = 3000 rpm Tacho: 0.317 Vs/rad Shaft diameter: 22 mm Shaft length: approx. 21 mm (shaft extension from centering edge) Centering diameter: 70 mm, 7 mm height Bolt circle diameter: 92 mm, 4x M8 mounting screws Overall length: 270 mm (without shaft) Housing diameter: 133 mm Weight: approx. 20 kg Good condition

Year of construction: 2023, condition: used, functionality: limited functionality, GÜNTHER - SPLITTER TWIN WAVE The Günther SPLITTER Twin Wave is a screening/separation machine designed for materials that are difficult to screen, especially coarse, wet, sticky, or contaminated substances. It is used to separate material based on grain size and to remove unwanted components such as stones, clay, mixed waste, or unshredded material. Ljdpfxsy N Rlvj Acfjaf The machine is particularly suited for construction material recycling and processing, especially for mixed construction waste, excavated soil, as well as stones and earth. The twin-wave design keeps the material longer on the screening deck, helping to better dislodge adhering or clay-heavy components.

Year of construction: 2009, condition: used, functionality: fully functional, machine/vehicle number: 001-2009, MAPSFERA 1 09 METAL SORTING LINE, consisting of a vibrating feeder, conveyor belt, head magnetic pulley, and eddy current separator, designed for efficient automatic separation and recovery of ferrous and non-ferrous metals in industrial recycling applications. • Manufacturer: MAPSFERA Laedpfjzbtrzsx Acfef • Model: 1 09 • Configuration: vibrating feeder + conveyor belt + magnetic pulley + eddy current separator • Application: separation of ferrous and non-ferrous metals from mixed waste streams • Status: available for inspection • Current condition: dismantled / stored The system is designed for continuous industrial operation in material recovery and recycling plants, enabling highly efficient metal sorting from mixed input streams. The vibrating feeder ensures a controlled and uniform material flow, while the conveyor system transports the material through the various separation stages. The head magnetic pulley removes ferrous metals, and the eddy current separator allows for the effective separation of non-ferrous metals such as aluminum and copper, improving overall recovery rates and material purity.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, WOLFF - Sand separation and washing plant Lajdpfx Acoy N Rtyofjf

Condition: new, Year of construction: 2026, Cyclone Dust Separator with Waste Container and Vacuum Hose Included The cyclone dust separator with waste container and vacuum hose is a practical solution designed for efficient dust extraction in woodworking workshops and industrial environments. The separator allows two machines to be connected simultaneously, improving the efficiency and convenience of the dust collection system. The dust separation process is based on centrifugal force. Extracted dust particles are separated from the airflow and collected in containers located beneath the cyclone. The separator efficiency reaches 90–95%, significantly reducing the amount of dust reaching the filtration system. Device description Metal separator housing, Metal waste collection container, Mobile base, Ergonomic handle, Viewing window for checking the container fill level, Lasdevu Uugjpfx Acfjf Quick-release clamps for easy bag installation. The cyclone must be connected to a fan or dust extraction system. Operating principle In the cyclone separator, contaminated air enters the cylindrical chamber and begins to rotate. Due to centrifugal force, heavier particles suspended in the airflow are pushed toward the outer walls of the chamber. As they lose speed and kinetic energy through contact with the cyclone walls, they fall downward under the influence of gravity and collect in the container. The lightest sawdust particles are then captured by the filter cartridge and directed into the collection bag, while cleaned air exits through the sides of the filter. Technical specifications Parameter Specification Tank capacity 118 L Bag dimensions Ø500 x 850 mm Inlet diameter 125 mm Inlet adapter diameters 1 x Ø125 / 2 x Ø100 mm Outlet diameter 125 mm Outlet adapter diameter Ø125 mm / Ø100 mm Weight (net/gross) 24 / 26.5 kg Overall dimensions 785 x 508 x 1545 mm Note: The fan, dust extractor, and Ø100 mm hose are not included in the set.

Condition: new, Year of construction: 2026, The magnetic separator is an industrial device designed for continuous purification of coolants and oil-based fluids from ferromagnetic particles generated during machining processes. In closed-loop systems, it effectively removes metal chips and fine particles from the working medium, stabilizing cooling and lubrication parameters while reducing wear on pumps and installation components. Magnetic coolant separator – key benefits in maintaining clean machining fluids In production environments, coolant operating in a closed circulation system is constantly exposed to metallic contamination. Ferromagnetic particles act as an abrasive material – accelerating pump wear, causing deposits in channels and nozzles, and reducing the stability of the lubricating film. As a result, the risk of surface scratches increases, machining quality decreases, and downtime related to filtration and coolant replacement becomes more frequent. A magnetic separator for machining fluids solves this problem by automatically and continuously capturing metal particles without interrupting the production process. This allows the working medium to maintain consistent operating parameters, while the cooling system remains stable even under intensive working conditions. What do you gain by implementing a magnetic separator in a coolant system? Continuous coolant cleanliness – without the need to stop production. Protection of pumps and circulation components by reducing abrasive particle contamination. More stable machining quality (fewer scratches and improved process repeatability). Extended coolant service life and reduced disposal costs. Lower failure rates and reduced maintenance costs of filtration systems. Improved waste management – automatic removal of collected chips outside the working area. Why is magnetic separation more effective for removing ferromagnetic particles? Unlike traditional mechanical filters, which require periodic cleaning and may experience reduced flow due to filter clogging, magnetic separation operates continuously with minimal maintenance requirements. A magnetic coolant separator removes ferromagnetic particles consistently, maintaining stable fluid flow and high machine availability. Design and operating technology The device has been designed to mechanically and continuously separate metallic contaminants from process fluids. The main working element is a stainless-steel magnetic drum, which rotates and attracts ferromagnetic particles from the flowing coolant. The collected contaminants are then removed and transported outside the working area. The removal of collected particles is carried out by a shaft system: Ljdpfeycc Rpex Acfoaf Magnetic shaft – responsible for capturing and holding metal particles during the separation process. Rubber-coated pressure shaft – stabilizes the removal of contaminants and assists in directing them into the waste container. Standard equipment Magnetic separator with stainless-steel magnetic drum Rubber-coated pressure shaft Working tank Electric drive Technical specifications Parameter Value Width of rubber-coated pressure shaft 140 mm Diameter of rubber-coated pressure shaft 65 mm Width of magnetic shaft 140 mm Diameter of magnetic shaft 110 mm Inlet connection 50 mm Outlet diameter 53 mm Motor power 0.25 kW Capacity up to 25 l/min Weight 35 kg

Year of construction: 1998, condition: ready for operation (used), functionality: fully functional, Permanent magnetic conveyor belt separator, including frame, belt speed: approx. 1.7 m/s, drive power: 4 kW (complete geared motor, brand new), Laodpfxszma Ews Acfof overall length: approx. 2650 mm, width: 1500 mm, height: 700 mm, belt width: 1000 mm, ideal installation distance: 200-250 mm (max. 300 mm), weight without frame: approx. 3000 kg.

Condition: good (used), Power: 7,8 kW. Amperage: 52 A. Voltage: 150 V. 100% ED Magnet L x W: 1.780 x 1.380 mm. Conveyor belt: 1.400 mm. Ljdpsg Stwmsfx Acfeaf AA. : Ca. 2.800 mm. With transformer rectifier of 380V. primary. Overband separator will be overhauled, sandblasted, painted.

Condition: new, Year of construction: 2024, functionality: fully functional, Ideal for separating ferrous impurities from granulates such as plastics and dry, free-flowing powders such as flour and sugar in free-fall conveying systems. We would be happy to carry out a test with your material to ensure that our product optimally meets your requirements. Ljdpfxsuc S Ihe Acfjaf If you have any further questions, please do not hesitate to contact us.

Condition: excellent (used), functionality: fully functional, Trendelkamp Separation Table / Vibrating Sieve Machine – 3 Fractions For sale is a Trendelkamp separation table, model TK-K60/85, weight 200 kg. This machine is designed for the precise separation of bulk materials into three fractions by means of vibration and screening. Technical data: • Manufacturer: Trendelkamp Stahl- und Maschinenbau GmbH + Co. KG • Model: TK-K60/85 Lsdpfxjw Ip Dts Acfeaf • Weight: approx. 200 kg • 3-fraction separation • Driven by electric motor with unbalance drive • Robust steel construction, screen decks made of stainless steel • Screens can be easily replaced upon request (different mesh sizes available) Areas of application: Ideal for plastic granulate, recycling materials, pellets, bulk materials, and other applications requiring separation into three size classes. The machine is immediately ready for use and in good condition.

Year of construction: 2006, condition: used, Colour: Grey Empty weight: 2.000 kg Dimensions (LxBxH): 210 x 240 x 210 cm - Year: 2006 - Documentation available: No - CE certificate present: No - Transport dimensions: 2100mm x 2400mm x 2100mm (l x w x h) - Transport weight [kg]: 2000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Ljdpfewh I Edex Acfsaf Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: good (used), Motor: 1.5 kW Quantity: 2 units Ledpfx Ajhc Sypecfsaf Price/unit

Year of construction: 2022, operating hours: 400 h, condition: as good as new (ex-display), functionality: fully functional, !!!Demonstration machine with low operating hours!!! Model: Lepton 5100 Year of manufacture: 2022 Operating hours: approx. 400 hrs Location: D 84069 Schierling Availability: short notice Equipment: - Base machine Lepton 5100 with screen decks 1 and 2 Screen deck 1 mesh size: 36 mm Screen deck 2 mesh size: 24 mm - Pre-screen deck with large hopper and variable dosing roller - Volume measurement via load - Prepared for air separator - Compressor - LED lighting package - Radio remote control for all key settings - Diesel-electric drive 80 kW - Axle levelling system - Tandem axle, road approval for 80 km/h - 19,000 kg total weight - Transport dimensions: 11.97 m total length, 3.98 m height, 2.53 m width, no special transport permit required Possible screening materials: Compost, green waste, biomass, root wood, waste wood, municipal waste, RDF, various recyclables (not suitable for construction rubble or excavated material) Miscellaneous: Very good used condition, fully operational Laodpfjrt Uvzex Acfjf

Year of construction: 2022, operating hours: 2,896 h, condition: reconditioned (used), functionality: fully functional, Model: Lepton 2100 Year of Manufacture: 2022 Screening Hours: approx. 2896 hrs Engine Hours: approx. 3486 hrs Location: D 84069 Schierling Availability: short-term Equipment: - Base machine Lepton 2100 with Screen Deck 1 (optionally upgradable to a second screen deck) Screen Deck 1 spacing: 70 mm - Tracked undercarriage - Pre-screen deck with long hopper and accelerator belt - Radio remote control for all key adjustments Lodpfewlt N Nox Acfeaf - Diesel-electric drive 80 kW - Level compensation - 18,500 kg total weight - Transport dimensions: 11.97 m overall length, 4.10 m height, 2.53 m width Possible screening materials: Compost, green waste, biomass, root wood, waste wood, municipal waste, RDF, various recycling materials (not suitable for construction debris or excavated earth) Other: Very good used condition, fully operational

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 600 kg, New separator bucket with 4 rollers Ledpjzltd Defx Acfsaf Ideal for excavators from 7 tons upwards.

Condition: excellent (used), power: 6 kW (8.16 HP), Year of construction: 2003, Year of manufacture: 2003 Technical condition: very good Visual appearance: very good Damages: none Laedpfxeu Hlgbs Acfjf Please contact Ferdinand Pater for more information

Condition: refurbished (used), functionality: fully functional, SEPA 2000T separator, ideal for recovering meat from bones and separating soft tissues from hard ones. The device is characterized by high efficiency, which makes it an indispensable element in food processing. Technical specifications: Manufacturer: Sepamatic Model: SEPA 2000T Mesh size: 5 mm Power: 11 kW Power supply: 400V, 50Hz Power consumption: 22A Control voltage: 24V Electrical diagram: No. 0695030 B Made in Germany Dimensions: Length: 165 cm Width: 150 cm Height: 200 cm Application: The SEPA 2000T separator is ideal for processing poultry, pork, and beef. Thanks to its 5 mm mesh, it allows for high-quality separation of raw materials while maintaining high efficiency. Why choose the SEPA 2000T? Robust construction High separation efficiency Easy operation and maintenance Laedpfx Asw Dcrkocfef Compact dimensions ideal for production lines

Condition: good (used), We are offering a BEKO Öwamat 4 here. Technical data and specifications: Subject to change without notice. Lasdpfxextu Nke Acfef Please contact us for a quote.

Condition: used, Year of construction: 2010, volume flow: 1,500 m³/h, suction capacity: 1,500 m³/h, Hönag Type 1500 Filter, Extraction, Air Filter, Emulsion Mist Separator Used, as shown in the pictures From stock (may show signs of storage) For further technical information, please refer to the pictures. Scope of delivery as shown in the pictures. With invoice. The invoice will be enclosed with the shipment. Payment method: Lajdpfxezkax Ej Acfef Bank transfer Self-collection Information about bank details, payment terms, etc., will be sent by email. W117

Condition: used, volume flow: 1,250 m³/h, suction capacity: 1,250 m³/h, Büchel ENF1250 Extraction System, Air Filter, CNC Machine, Emulsion Mist Separator Used, as shown in the pictures. From warehouse stock (may show signs of storage). For further technical information, please refer to the pictures. Scope of supply: as shown in the picture. With invoice. The invoice will be enclosed with the shipment. Payment method: Bank transfer Self-collection Lajdpfozkak Ujx Acfsf Information regarding bank details, payment terms, etc., will be sent to you by email. W117

Condition: used, REDA RE 50 Cream Separator The REDA RE 50 Cream Separator is a high-performance dairy processing machine designed to efficiently separate cream from milk. Built with advanced technology, this separator ensures superior cream quality while maximizing yield. Key Features: - Capacity: Designed for high volume, the RE 50 can process large quantities of milk, making it ideal for both small-scale and industrial dairy operations. - Efficiency: The separator operates with minimal energy consumption, ensuring cost-effective processing. - Durability: Constructed from high-quality stainless steel, the machine offers outstanding resistance to corrosion and wear, ensuring a long service life. Lsdpfozfgbcjx Acfjaf - Easy Maintenance: With a user-friendly design, the RE 50 is easy to operate and maintain, saving valuable time for dairy processors. - Adjustable Settings:Users can customize the separation process to achieve the desired cream consistency and quality. The REDA RE 50 Cream Separator stands out in the market for its reliability, efficiency, and exceptional performance. It is the perfect choice for dairy farmers and processors looking to enhance their cream production. Capacity Skimming : 5000 Litres/ Hour Clarification: 7500 Litres/Hour Cream Skimming: 0.03% Tools: Included Control Panel: Included Water System and Pump: Included Base Plate: Included CIP: Yes Type: Automatic Cleaning Manuals: Included Export Packing: Included

Condition: used, Three-phase electric motor, 37 kW, three-phase motor, SIEMENS AC motor, electric motor, squirrel-cage rotor, asynchronous motor Type 1LE16032BB034GB4 Design V1 Ledezin Acopfx Acfsaf Frame size 225S Motor speed 1478 rpm Current draw 66 Amps Motor power 37 kW Mains connection 400 Volts, 50 Hz Shaft diameter Ø 60 mm Shaft end length 135 mm Keyway width in the shaft 18 mm Flange outer diameter 450 mm Centering diameter 350 mm Bolt circle Ø 400 mm - Flange motor with 8 mounting holes Ø 18 mm Overall length of motor housing without motor shaft 660 mm Overall length of motor housing with motor shaft 800 mm Space requirement L x W x H 800 x 400 x 570 mm Weight 300 kg Very good condition - New, unused, from stock clearance

Condition: new, Year of construction: 2025, functionality: fully functional, total width: 1,600 mm, total length: 1,600 mm, total height: 2,150 mm, overall weight: 1,140 kg, electrical fuse: 63 A, input voltage: 400 V, drive type: Elektromotor, Attachment wind sifter TUKWIND PRO 18. The combination blower with suction and compressed air in one station. - Compact separation system for attachment to existing screening technology (mobile & stationary) Laodowhfgrjpfx Acfjf - High suction and compressed air performance – infinitely adjustable by built-in frequency converter - Electric drive, therefore very low maintenance costs - 18.5kW power requirement; power plug: 63A CEE A wide range of applications is enabled by the robust design and individual adaptation to conveyor belts, etc. Ideal size for drum screening machines of the 5-6m class: (SM518, SM620, T5, T50, T6, T60, MAXX, Nemus, Cribus 2800, Cribus 3800, and more) Fields of application: construction waste recycling (Styrofoam, plastic films, wood chips, hard plastic pieces), composting (plastic films), RDF cleaning (plastics), brick chipping cleaning, and more.