Used Steinert Eddy Current Separator for sale (13,055)

Condition: used, maximum load weight: 175,620 kg, overall weight: 219,000 kg, axle configuration: > 3 axles, first registration: 01/2002, Equipment: ABS, STHP 8 (3+5) 8-piece hydraulic swing BPW axle unit with remote control. Technically permissible total weight: 219,000 kg Payload: 175,620 kg Hydraulically suspended and 8-axle steerable Goldhofer low bed trailer, type STHP (3+5), comprising 4 heavy-duty modules with a detachable gooseneck, up to 5 m long telescopic excavator low bed with 4 wheel recesses, ABS, and technical payload up to 175,620 kg. Consisting of the following four separate heavy-duty modules: 1st Module: Hydraulic universal gooseneck, type STH - Can be combined with heavy-duty dolly modules and overdrive loading bridges - Unladen weight: 5,900 kg - Permissible front fifth wheel load: 35,000 kg - Length: approx. 4.10 m - Saddle height: approx. 1.30 m - King pin: 3.5" - Plug-in aluminum side walls - Fully hydraulically movable 2nd Module: Goldhofer THP/ST3 3-axle heavy-duty chassis module - Permissible total weight (as a single module): 108,000 kg - Permissible axle load: 36,000 kg at 5 km/h - Unladen weight: 10,350 kg - Technical payload (as a single module): up to 97,650 kg at 5 km/h - 8 hydraulic pendulum axles, tires: 215/75/R17.5 - Axle load: 25 t at 20 km/h - Vehicle width: 3 m - Axle spacing: 1.5 m - Max. steering angle: ±60° - Hydro-mechanical 2-circuit forced all-wheel steering integrated in chassis, max. axle steering angle: 60°, with integrated hydraulic oil tank - Front/rear optimized pin-plate coupling for longitudinal configurations - Single-wheel pendulum axle assemblies, total 8 wheels per axle line - Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure accumulator suspension - Hydraulic steering for all axles - BPW axles with drum brake incl. ABS, technical axle load 34 t at 5 km/h 3rd Module: Low bed heavy-duty module, extendable - excavator bridge - Year of manufacture: 2002 - Internal dimensions: approx. 7.50 m length, 3.00 m width, loading height 0.40 m - Construction height: 350 mm - Extendable by approx. 5.00 m - Unladen weight: 11,900 kg - 4 wheel recesses, extension module in the front area - Overall height in wheel recess area: approx. 150 mm - Loadable up to 80 t in the low bed and 175.6 t in the complete module combination STHP 8 (3+5) - Front and rear hydraulic bolt plate coupling with claw coupling adapter 4th Module: Goldhofer THP/ET5 5-axle heavy-duty chassis module - First registration: 04.01.2002 - Permissible total weight: 115,000 kg - Permissible axle load: 23,000 kg at 5 km/h - Unladen weight: approx. 14,200 kg - Technical payload: up to 100,800 kg - Single-wheel hydraulic pendulum axles with 4 wheels per axle line, 20 x 285/70 R 19.5 tires - Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure accumulator suspension - Hydraulic steering for all axles - Radio remote control for steering axles 5. Notes: The 4 heavy-duty modules allow for up to 3 different train combinations! Payloads vary depending on combination. The low bed can be inspected and demonstrated at our site. A current manufacturer's certificate from Goldhofer is available for this special low bed combination. Price NET plus 19% VAT. All information subject to change and prior sale. Internal vehicle number: 2285 Advert also available in full German / Inserat auch komplett in Deutsch verfügbar Gsdpsz N Np Nefx Afuekc

Condition: good (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 017, working width: 400 mm, compressed air connection: 8 bar, type of input current: AC, total width: 6,454 mm, total length: 7,685 mm, total height: 2,560 mm, overall weight: 5,000 kg, product height (max.): 150 mm, Equipment: CE marking, PERONDI LSV 5060 – Complete Production Line in Very Good Condition PERONDI LSV 5060 in very good condition, offered as a complete production line together with associated auxiliary equipment. The machine has been well maintained and carefully operated throughout its service life. The PERONDI LSV 5060 is in very good working condition and is ready for continued professional production. The machine has been regularly maintained and operated with care. Complete Production Line Includes: PERONDI LSV 5060 Wrapper Hot-melt glue system Feeder Vacuum belt Godpoz Hl I Usfx Afuskc Minimum Size box: 60 x 60 x 20 mm Maximum size box: 600 x 400 x 150 mm Machine highlights: Manufacturer: PERONDI Model: LSV 5060 Very good overall condition Well maintained Carefully operated Ready for continued production Inspection and demonstration possible by appointment The included equipment forms a complete and integrated production line, providing the buyer with a ready-to-use solution for continued professional production. This is an attractive opportunity to acquire a well-maintained PERONDI LSV 5060 together with all associated equipment, rather than purchasing the individual components separately. The complete line is currently available for inspection, and a demonstration can be arranged by appointment. Further technical specifications, photographs and additional information are available upon request.

Condition: used, Inject Star P 60 Bone Separators Gedpfx Aozu Ddaofujkc

Condition: ready for operation (used), Peddinghaus Model 210 Super 16 / Profile Steel Shear Gksdpfx Afsz Dq Tkjuec - COMPLETE TECHNICAL DATA, SEE PHOTO - Punching force 860 - 900 KN (86-90 tons) - Punching capacity max. 31mm / 20mm thickness - Reach approx. 510mm - Punching stroke max. 29mm - Stroke rate 40-45 strokes / minute Material capacity (shearing & notching) - Round steel up to max. 50mm - Square steel 40x40mm - Angle iron (L-profile) 140x140x13mm - Notching (I & T steel up to 80x14mm) - Drive power 4 KW - WITH PUNCHING TOOLS & Punches & Spare blades - Foot switch - DOCUMENTATION Dimensions: L x W x H 2.1 x 0.8 x 2.2 meters / Weight 3700KG Subject to errors / typographical errors

Condition: excellent (used), Year of construction: 2022, operating hours: 1,000 h, functionality: fully functional, machine/vehicle number: SN210551, overall weight: 14,000 kg, type of input current: AC, input voltage: 400 V, power: 400 kW (543.85 HP), Equipment: type plate available, A MIXACO heating/cooling mixer is a combined system consisting of a heating mixer and a downstream cooling mixer, specifically designed for the processing of powders, granules, and compounds (e.g., PVC dry blends, WPC, or masterbatches). Technical specifications – summary (details can be found in the documents): Hot mixer: • Volume: 3500 liters – Usable volume: 2500 liters • Tip speed: 5-50 m/s • Made of duplex steel – 1.4462 stainless steel Gkjdpfxez Iww Ro Afuec • Power drive with 400 kW FC controlled • Vacuum up to 150 mbar abs. Cold mixer: • Volume: 9000 liters – Usable volume: 7650 liters • Tip speed: 3.5 – 7 m/s • Made of 1.4541 stainless steel • Power drive with 90 kW FC controlled The operating principle is divided into two physically and apparatus-wise separate process phases: 1. The heating mixer phase (heating and homogenizing) • Mechanical friction: In the heating mixer, a modular mixing tool rotates at a high circumferential speed (approx. 10–40 m/s). The intense flow and vortex formation (mixing vortex) causes the particles of the mixture to rub intensely against each other. • Heating: This mechanical friction generates the necessary thermal energy directly in the product, quickly and evenly heating the material to the desired target temperature (sometimes exceeding 100 °C). • Recipe component addition: At the same time, all recipe components, such as additives, dyes, or liquids, are perfectly homogeneously distributed. An integrated aspiration system also ensures the dehumidification of the mixture. 2. The transfer • Once the target temperature defined in the process program is reached, a contoured, dead-space-free outlet opens on the heating mixer. • The hot, homogeneous mixture is transferred with minimal residue and quickly to the cooling mixer, which is located directly below or next to it. The heating mixer is then immediately available for the next batch. 3. The cooling mixer phase (gentle cooling) • Heat exchange: In the cooling mixer (available in vertical or horizontal design), the hot material is passed over cooled surfaces. • Water cooling: A targeted cooling water circuit in the double jacket (bottom and side walls) efficiently removes thermal energy from the dry blend. • Agglomeration prevention: A slow, material-friendly stirring mechanism keeps the mixture in motion until the final storage temperature is reached. This prevents caking (compaction) due to residual heat before the material is transferred to silos or further processing. Summary created with AI. The units can be inspected in operation in the Netherlands. The system for sale was used in the R&D center of UBQ for development purposes. This explains the very good condition for the low number of production hours. We also have a steel structure available for the setup. This is not included in the price. If there is interest, it can be negotiated separately. Currently, the system is located outside of Europe – we need to determine whether direct transport is feasible or whether import to Europe by UBQ is more sensible (which would allow for a sale within Europe with a reverse-charge mechanism).

Condition: ready for operation (used), Year of construction: 2013, operating hours: 12,486 h, functionality: fully functional, travel distance X-axis: 3,400 mm, travel distance Y-axis: 2,300 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 18,000 rpm, controller model: Siemens 840D sl, TECHNICAL DETAILS Travel range X-axis: 3,400 mm Travel range Y-axis: 2,300 mm Travel range Z-axis: 1,000 mm Rapid traverse X-axis: 60 m/min Rapid traverse Y-axis: 60 m/min Rapid traverse Z-axis: 40 m/min Design: C3 swivel head Swivel range C-axis: 200° Swivel range A-axis: 120° Spindle motor power: 24 kW Spindle mounting: HSK 63 A Spindle speed: 18,000 rpm Spindle cooling: Water cooling Design: Disc tool changer Tool magazine positions: 20 Pick-up positions: 1 Tool diameter: up to Ø 500 mm Table length: 2,000 mm Table width: 1,500 mm Table thickness: 30 mm Grid spacing: 100 x 100 mm Maximum load capacity: 2,000 kg Repeatability: approx. 0.012 mm MACHINE DETAILS CNC control: Siemens 840D sl Spindle operating time: approx. 12,486 hours Power-on hours: approx. 37,297 hours EQUIPMENT 5-axis package: included Advanced Surface: included TCP: included Control panel size: 15 inches Remote maintenance: prepared Workpiece measuring probe: m&h wireless measuring probe Tool measurement: BLUM laser Gkjdpoz Izduefx Afuoc Minimum quantity lubrication: internal and external lubrication Central lubrication: automatic Spray mist extraction: with electrostatic separation Full protective cabin: included Tool changing chamber: separate Technical documentation Operating manual Omlat spare spindle included

Condition: good (used), Year of construction: 2002, overall weight: 600 kg, Equipment: CE marking, documentation/manual, For sale: a used Hebrock EURO 2000 edge banding machine. Equipment: +Cutting unit +Routing unit for radius and chamfer +Digitally controlled glue temperature +Automatic feed +Adjustable workpiece pressure +Extendable workpiece support +Control panel with separate selection of units Gjdpfx Asz Hy A Hjfuskc +Operating manual and machine documentation available Technical data: +Year of manufacture: 2002 +Machine no.: 4868 +Connection power: 7.0 kW +Voltage: 230/400 V +Frequency: 50 Hz +Current draw: 13.6 A Inspection and test run possible by prior arrangement. Invoice with VAT shown. Subject to prior sale and errors.

Condition: used, functionality: fully functional, Year of construction: 2019, machine/vehicle number: 53, overall weight: 38,500 kg, input voltage: 400 V, input current: 355 A, input frequency: 50 Hz, broaching speed: 12 m/min, workpiece diameter (max.): 225 mm, total length: 7,100 mm, total width: 11,560 mm, total height: 6,000 mm, Forst RISH 60 x 2125 x 630 – Vertical internal broaching machine Used Forst broaching machine for internal broaching of ring gear workpieces. The machine features a lifting table and a servo-electric broaching drive; the broach pitch is set via the NC program. Machining is performed individually or in pairs, depending on the workpiece. Identification Manufacturer: Forst Technologie GmbH & Co. KG Type: RISH 60 x 2125 x 630 Factory number: 53 Forst order number: M233202 Reference / Inventory number: 351024 Year of manufacture: 2019 (according to machine data sheet) Technical data according to machine documentation - Maximum tensile force: 600 kN - Maximum stroke: 2,125 mm - Maximum cutting speed: 12 m/min - Return stroke speed: 20 m/min - Maximum workpiece diameter: 225 mm Gsdpfx Afsz Hq Akouekc - Maximum workpiece height: 50 mm - Maximum tool diameter: 200 mm - Tool shank diameter: 80 mm - Tool tip diameter: 75 mm - Overall dimensions (L x W x H): approx. 7,100 x 11,560 x 6,000 mm - Total weight of the machine: approx. 38,500 kg - Weight of the base machine: approx. 34,500 kg - Electrical connection: 400 V, 3 phases, 50 Hz - Rated current according to nameplate: 355 A Documented features - Siemens SINUMERIK 840D sl / S7-300 - Operator panel OP012 and hand-held operating unit HT8 - SKF roller screw drive and linear guides - Hydraulic workpiece clamping - Coolant system with high/low pressure supply and 1,800-liter tank - Chip conveyor and chip centrifuge - Oil mist separator and central lubrication system Operating manual and technical documentation are available. The data and features listed describe the documented machine condition. The actual scope of supply should be agreed upon before finalization. The suitability for other workpieces requires a technical assessment and, if necessary, adapted tools and fixtures. Used machine, operated without malfunctions until disassembly. Price on request.

Condition: used, mileage: 112,000 km, power: 103 kW (140.04 HP), first registration: 05/2009, fuel type: diesel, overall weight: 2,210 kg, next inspection (TÜV): 10/2028, color: white, gearing type: mechanical, emission class: euro4, number of seats: 5, total length: 4,505 mm, total width: 1,794 mm, total height: 1,694 mm, Year of construction: 2009, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), 1st owner. Only just over 112,000 total kilometers with service booklet (last service 02/2026 at 110,216 km at a VW dealership). Most inspections were carried out at an authorized VW service center. New TÜV (German technical inspection) valid until 10/2028. Directly from the fleet of a German aid organization. Many of the components that typically need replacing on a VW Touran have already been replaced recently: 2026: New turbocharger 2023: New timing belt 2023: New clutch and new dual-mass flywheel 2023: New front brakes and new rear brake pads The Touran was delivered in the fire department and disaster relief version. It has a STROBEL conversion as an emergency response vehicle with rear-mounted storage, drawers, and a partition grille. LED light bar on the upper part of the tailgate. Previously registered as an NEF (emergency medical response vehicle) "other type of vehicle". 5 seats. Equipped with a special signaling system. Off-road chassis as standard. 8 tires (including rims). Air conditioning. Auxiliary heater (already renewed). Audio system. Cruise control. ABS. ESP. Brake assist. Airbags for driver and front passenger, as well as side airbags. Central locking/remote control (2 original VW remote keys included). 2.0 liter - TDI diesel engine, Euro 4. Green environmental badge. 6-speed manual transmission. 200 km/h maximum speed according to documentation. Additional turn signal lights at the top rear. Gkodpfoz Iuztjx Afuec The Touran is in good condition. It was recently driven to us without any problems for almost 400 kilometers on the highway. The VW has no unusual noises and no error messages. The Touran runs very smoothly and powerfully. The regular maintenance over the years has paid off. According to the aid organization, the power supply located at the bottom left at the rear is currently not functioning. We were unable to verify this ourselves due to a lack of a suitable connection cable. Signs of use are present, but damage and accidents are not known. A suitable set of snow chains is also included in the vehicle. The currently mounted, good winter tires with the snowflake symbol are from CONTINENTAL and have a DOT code of 2022. The Touran is available immediately. This offer is only valid for businesses, freelancers of all kinds, as well as for authorities / emergency services / aid organizations of all kinds. Unfortunately, we do not sell to private end consumers. Subject to prior sale and errors. The purchase price is the final price, gross = net (=differential taxation according to §25a UStG. This means that no value-added tax is added to this purchase price and, at the same time, the VAT cannot be calculated separately).

Condition: good (used), Year of construction: 2016, This planting machine is suitable for planting branched plants, such as conifers and Christmas trees. Operating procedure The furrow opener makes an appropriate furrow. Plant is inserted by hand at a mark between the plant discs. The plant discs insert the plant into the furrow and release the plant into the furrow. The furrow is firmly pressed by the pressing wheels. Gkjdpfx Asz Rf Rrofuoc General specifications Diameter of the plant discs1000 mmMaximum plant height above the ground50 cmMinimum row distance55 cm (row distance currently at 75 cm with 3 rows)Planting depth10-20 cmPlant spacing in the rowfrom 15 cmCapacity1000-2000 plants per person per hour The machine is currently configured as a 3-row version, with the 4th element supplied separately More information or a quote? Do this quick and easily via the Duijndam Machines website! You can also give us a call. See all the available machines at our website. Since 1977 supplier of reliable used agricultural and horticultural equipmentMachines are checked for deliveryExperienced teamWe can help you with getting the machine to your company Duijndam Machines The specialist in used agriculture and horticulture machinery

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, The VEMAG sausage production line is a complete set of three cooperating VEMAG machines: the HP30E vacuum filler (2012), the LPG 208 length-portioning linker (2014), and the AH212 hanging machine (2016). The set covers the entire process from filling the casing, through portioning and linking sausages into lengths of a set size, to automatic hanging on smoke sticks, enabling efficient and repeatable production in medium and large meat plants. How does the VEMAG sausage production line work? Key advantages of the VEMAG sausage production line Vacuum operation ensures a compact, uniform stuffing without air pockets, improving the appearance, color, and shelf life of finished sausages. The LPG 208 linker allows cooked, fresh, and dry sausages to be produced on one machine, using natural, collagen, cellulose, and polyamide casings, and its automatic casing pusher shortens changeover times. Interchangeable dividing belts with quick-release catches can be changed in under 1 minute, and the linking speed can be set separately for each casing type. Gentle handling protects casings, including overlapped ones, and the hygienic design allows low-pressure cleaning. The AH212 hanging machine allows any hanging pattern (individually, in pairs, in threes, in fours, etc.) and ensures ergonomic work, reducing operator physical strain. All three units come from a single manufacturer and are designed to work together, which simplifies control, operation, and servicing of the entire line. Technical specifications of the VEMAG sausage production line VEMAG HP30E vacuum filler (Filler) Manufacturer: VEMAG Model: HP30E Year of manufacture: 2012 Filling capacity: up to 8,700 kg/h Portion weight: 5 g to 99,999 g Gkedpfx Aoz N A Niofuec Air consumption: approx. 40 l/min Portioning speed: > 600 portions/min Vacuum system: 40 m³/h Capacity: 350 l VEMAG LPG 208 length-portioning linker (Linker) Manufacturer: VEMAG Model: LPG 208 Serial number: 2080470 Year of manufacture: 2014 Power supply: 400–460 V, 3~, 50/60 Hz Rated current: 7 A Power: 4.5 kW SCCR: 5 kA rms Weight: 517 kg Caliber range: approx. 13–40 mm and more Filling rate: from approx. 300 to 4,400 kg/h (depending on casing type and caliber) Linking head: twin, casing change in under 2 s Dividing belt changeover: under 1 min VEMAG AH212 hanging machine (Hanging Machine) Manufacturer: VEMAG Model: AH212 Serial number: 2120444 Year of manufacture: 2016 Power supply: 400–460 V, 3~, 50/60 Hz Power: 0.5 kW SCCR: 5 kA rms Weight: 298 kg

Condition: used, Year of construction: 2002, machine/vehicle number: 96.164, functionality: unexamined, overall weight: 3,000 kg, spindle diameter: 40 mm, number of spindles: 6, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Number of spindles: 6 Spindle 1 Spindle type: Bottom Spindle diameter: 40 mm Gkedpfx Afez Nir Reuec Spindle 2 Spindle type: Right Motor power: 11 kW Spindle diameter: 40 mm Spindle 3 Spindle type: Left Spindle diameter: 40 mm Spindle 4 Spindle type: Top Motor power: 11 kW Spindle diameter: 40 mm Spindle 5 Spindle type: Top Motor power: 7.5 kW Spindle diameter: 40 mm Spindle 6 Spindle type: Bottom Motor power: 7.5 kW Spindle diameter: 40 mm Infeed table length: 945 mm Diameter of feed rollers: 140 mm Conveyor motor: 14 kW Conveyor drive: Cardan shaft drive Tool type: Standard Lubrication system: Manual MACHINE DETAILS Diameter of extraction nozzle: 140 mm Voltage: 400 V Fuse: 63 A Dimensions & Weight Dimensions (L x W x H): 4,100 x 2,100 x 2,400 mm Empty weight: 3,000 kg Transport packages: 1 EQUIPMENT Tools for Spindle 1 Tools for Spindle 2 Tools for Spindle 3 Tools for Spindle 5 Tools for Spindle 6 NOTE Spindle 1 The brake is weak. The counter for the height adjustment is defective. Spindles 2 and 3 – shared motor The brake is defective. The height adjustment of Spindle 2 is very stiff and seized. The counters for the height and width adjustment of Spindle 2 are defective. The counters for the height and width adjustment of Spindle 3 are defective. Spindle 4 The spindle can only be turned with great difficulty; the bearings are defective. The height adjustment is seized. Spindle 5 The counter for the height adjustment is defective. Spindle 6 The width adjustment is seized, and the corresponding counter is defective. The motor emits a humming sound, presumably caused by the brake. Other defects The drive belts for spindles 1 and 6 are in very poor condition. The switch on the front of the machine for adjusting the table height is defective. The pressure reducing valve and the moisture separator need to be repaired or replaced. The lubrication pump is defective and needs to be repaired or replaced. The mechanism for speed regulation is defective and seized. The rubber coupling elements for the height adjustment are defective. Conclusion Due to the defects listed above, the machine could not be put into operation for testing purposes.

Condition: ready for operation (used), Year of construction: 1996, operating hours: 9,944 h, load capacity: 8,000 kg, lifting height: 3,900 mm, mast type: duplex, fork length: 1,500 mm, No minimum price – guaranteed sale to the highest bidder! Gjdpoz Nizlofx Afuokc TECHNICAL DETAILS Load capacity: 8,000 kg Lifting height: 3,900 mm Mast type: Duplex Fork length: 1,500 mm Fork width: min. 580 mm Fork width: max. 2,300 mm MACHINE DETAILS Fuel type: Diesel Engine manufacturer: Deutz Dimensions & Weight Dimensions (L x W x H): 3,600 x 2,230 x 3,200 mm Unladen weight: 11,000 kg Overhead height: 3,200 mm Transport packages: 1 piece Operating hours: 9,944 h EQUIPMENT Rotator fork adjustment License plate CE marking Documentation including vehicle registration document, oil leak, sale in current condition.

Condition: used, functionality: fully functional, machine/vehicle number: 35035, mileage: 7,700 km, power: 110 kW (149.56 HP), first registration: 03/2026, fuel type: diesel, overall weight: 7,490 kg, axle configuration: 4x2, fuel: diesel, color: orange, driver cabin: day cab, gearing type: semi-automatic, emission class: euro6e, suspension: steel, loading space volume: 4.2 m³, Equipment: ABS, air conditioning, airbag, cruise control, electronic stability program (ESP), power assisted steering, traction control, truck registration, The mileage of the vehicles offered may vary, as some vehicles are currently in rental use! Further comparable vehicles are available upon request. Gkjdsz Hxftopfx Afujc 4-cylinder engine, features an ECO mode and start/stop system, low-maintenance automated manual transmission type Duonic 2.0 (dual-clutch transmission), ABS, ASR, ESP, disc brakes, emergency braking assistance system (AEBS), Active Brake Assist 6, emergency brake light, tire pressure monitoring system, LED daytime running lights, LED headlights, leaf spring suspension, differential lock, hill start assist, lane keeping assist (LDWS), front collision assist, attention assist, turning assist, ball-type trailer hitch, lockable fuel tank, main tank 100 l. Cab with 3 seats, driver's comfort suspension seat, adjustable steering wheel, electric windows, heated and electrically adjustable mirrors, multifunction steering wheel, cruise control, radio with Bluetooth, digital tachograph, immobilizer with transponder, speed limiter, interface for alcohol tester, central locking with remote control. Air volume approx. 4.2 m³, usable volume approx. 4 m³, wall thickness 5 mm, level indicator (float) calibrated in 500 l increments, lower suction connection DN 100 Perrot, separate suction connection for hose DN 100, vacuum pump Jurop PNR 73 (approx. 432 m³/h) hydraulically driven, safety valve operating overpressure 0.5 bar, ventilation valve 0.2 bar, tank emptying by free discharge, expulsion with 0.5 bar via vacuum pump, control panel illuminated, made of stainless steel, splash-proof and lockable, located on the rear right of the superstructure, remote control, 2 hose trays made of aluminum, maximum length, 2 hook brackets on the full-width tailgate for securing hoses, suction hose reel with hydraulic drive, designed to accommodate approx. 40 m of suction hose DN 80 (suction hoses are not included in the price; hoses will be coordinated with the customer in the event of rental), waste container at the end of the frame on the right, lockable tool box at the rear left, 4x LED work lights, 2x at the rear and 2x on the right and left of the superstructure, 1x rotating beacon at the rear of the vehicle and 1x at the front left, 2x A-sign.

Year of construction: 2021, condition: used, functionality: fully functional, The iCombi Pro is the latest combination oven from Rational. The iCombi Pro 20.1/1 GN electric model, with 20 GN 1/1 compartments, is easy to operate even for untrained personnel, as it achieves outstanding food quality without requiring constant monitoring. The combination oven has undergone a comprehensive inspection in our in-house workshop and is therefore fully functional. It comes with a 6-month warranty on all electrical parts. You will receive an invoice with VAT shown. The recommended retail price is: €25,520 net / €30,368.80 gross. Our price: €10,907.56 / €12,980 gross. These are example images; actual images will follow shortly. The unit will be available shortly, as inspection work is currently being carried out. Our used equipment service for you: 6 months warranty on electrical parts, limited to the replacement of defective parts, excluding installation and removal costs. High-quality brand-name equipment at fair prices. Professional overhaul/inspection and expert cleaning. Tested and fully functional - or your money back. Flexible shipping or self-pickup options. Competent advice - before and after purchase. Provision of operating instructions, connection diagrams & spare parts. Inspection according to DGUV V3 Technical data: W x D x H: 877 x 913 x 1872 mm Minimum door opening dimensions for transport W x H: 900x1900mm Serial number: E21SJ21092917087 Year of manufacture: 2021 Max. loading capacity / compartment: 5 kg Max. total loading capacity: 100 kg Weight of electric appliance: 254 kg Electrical connection conditions: Voltage 3 NAC 400 V Electrical connection capacity: 37.2 kW Steam operation power: 36 kW Hot air power: 36 kW Fuse rating: 63 A Water connection conditions: Water inlet (pressure hose): 3/4 inch Water outlet: DN 50 Condition: Used, inspected and fully functional. Further details: Temperature range: 30°C to 300°C Senses the current cooking chamber conditions Recognizes the size, the amount of food loaded, and the product condition and calculates the browning accordingly Learns which cooking habits are used most often and implements them Determines the ideal cooking path to the desired result MyDisplay - user-adjustable, user-specific operating display TFT color display and touchscreen Application and operating manual can be accessed on the appliance display Core temperature sensor with automatic error correction in case of sensor failure and positioning aid Door - triple glazed, energy-saving LED interior lighting Includes energy consumption display Humidity regulation: percentage-accurate humidity measurement and setting Individual programming of at least 350 cooking programs with up to 12 steps Spraying adjustable in 3 levels USB interface High-performance fresh steam generator with automatic descaling 5 programmable air speeds Integrated, maintenance-free grease separator system without additional grease filter Cool-down function: rapid cooking chamber cooling Automatic adjustment to the installation location (altitude, climate, etc.) Appliance door with ventilated triple-pane glass and pivoting inner pane Wastewater fixed connection permissible according to SVGW Separate solenoid valves for soft and warm water up to +30°C Automatic start time preselection adjustable with date and time Material inside and outside made of stainless steel DIN 1.4301 Gksdpfxoz Ib S So Afuec WiFi module integrated Subject to change and errors.

Condition: used, Year of construction: 2008, machine/vehicle number: 654/08, functionality: fully functional, Used automatic edge bander with pre-milling unit. Robust machine designed especially for solid wood edges and lippings. - Control via LCD touch panel - Heavy-duty chain feed conveyor - Automatic thin edge feeding from magazine - Solid edge magazine - Pre-milling of panels using 2 cutter heads (with insert knives) - Glue preheating in a separate tank - Reinforced pressure zone with 5 pressure rollers - End trimming with 2 saw blades - Top and bottom trimming Gedpfou T Nhmex Afujkc Technical data: - Min./Max. edge height: 14 / 104 mm - Min. edge thickness: 0.4 mm - Min./Max. panel thickness: 10 / 100 mm - Feed speed: 12 m/min - Min. working length/width: 200 / 85 mm - Milling tool speed: 12,000 rpm - Dimensions: 5250 x 1100 x 1650 mm - Weight: 2000 kg The machine has been used and tested. It is operational but requires maintenance, cleaning, adjustment, and sharpening of the tools. Sold in its current condition.

Condition: used, Year of construction: 2012, functionality: fully functional, overall weight: 2,600 kg, type of input current: AC, input voltage: 400 V, 4 x Wagner Permanent Magnet Separators – various models A total of 4 used permanent magnet separators from the manufacturer Wagner Magnete are for sale. The magnetic separators were used in our recycling and processing plant and serve to automatically separate ferromagnetic components from different material flows. Due to the restructuring and upcoming reconstruction of our recycling plant, the four magnetic separators are being offered for sale. Technical data of the 4 magnetic separators: Magnet 1: - Manufacturer: Wagner Magnete - Type: 0452-115/130-250 G2 - Equipment number: 546235 - Weight: approx. 2,600 kg - Motor power: 3 kW Magnet 2: - Manufacturer: Wagner Magnete - Type: 0452-115/170-250 G2 - Equipment number: 546236 - Weight: approx. 3,340 kg - Motor power: 3 kW Magnet 3: - Manufacturer: Wagner Magnete - Type: 0452-95/130-250 G2 - Equipment number: 546237 - Weight: approx. 2,200 kg - Motor power: 2.2 kW Magnet 4: - Manufacturer: Wagner Magnete - Type: 0452-95/130-250 G2 - Equipment number: 546986 - Weight: approx. 2,200 kg - Motor power: 2.2 kW Further technical specifications (all 4 magnetic separators): - Belt speed: 1.5 m/s - Motor manufacturer: SEW - Operating voltage: 400 V - Current type: Three-phase (AC) - Frequency: 50 Hz Gedjz R Sw Hspfx Afuskc - Protection class: IP55 Condition and sale: All four magnetic separators are in used condition and show corresponding signs of wear and tear due to operation. The magnetic separators can be purchased individually or as a complete package. An on-site inspection is possible after prior appointment. Technical documentation is available. Price upon request. If you are interested or have any further questions, please do not hesitate to contact us.

Condition: new, functionality: fully functional, Year of construction: 2026, ‼️ ROAD APPROVAL* Josan – the VALUE LOADER Robust, reliable, and affordable – without unnecessary frills. Simple, easy-to-maintain technology without computers or complicated electronics. Our wheel loaders are powder-coated instead of just painted – a clear advantage against rust and de-icing salt. Whether for forestry, agriculture, equestrian facilities, construction sites, or commercial use: the all-purpose loader can be used in a variety of applications and is available with around 20 different attachments! ‼️ Feel free to watch our videos on our website. S22 Value Loader means: Standard equipment ⚙️ OUR COMPONENTS ✅ FREE DELIVERY throughout Germany to your yard! ✅ Road approval* from TÜV SÜD – available only from us! ✅ TÜV SÜD certificate ✅ TÜV Rheinland 2000/14 CE certified and tested according to German UVV guidelines (cabin FOPS and ROPS certified) ✅ SOFT HYDRAULICS! From the same supplier that sells to high-priced wheel loader manufacturers. This allows for sensitive and precise raising and lowering of the pallet forks. Feel free to test it on our premises. ✅ POWDER-COATED! Steel is sandblasted, then plastic powder is applied and baked in an oven. Our frame, tanks, boom, etc., are treated in this way. This provides extreme rust protection, which is INCLUDED! ✅ NEW! Larger luxury cabin with reinforced steel, so we meet the current FOPS and ROPS standards! This is very important for your safety. ✅ AIR-SUSPENDED COMFORT SEAT adjustable to your weight ✅ LIFTING CAPACITY approx. 1200 kg! With an unladen weight of approx. 2300 kg including bucket ✅ Hydraulic Euro attachment (standard EU dimensions) ✅ Up to 7 years warranty* ✅ Service throughout Germany by professionals in our own workshop ✅ Spare parts warehouse in Gemmrigheim. This allows us to send parts within 24 hours ✅ Our own factory in China ✅ High quality through continuous controls during the production process ✅ Thanks to our know-how and good mechanics, we can also provide short-term and uncomplicated assistance after the warranty period (throughout Germany and Europe) Technical data: ➡️ Unladen weight only approx. 2300 kg (with bucket) ➡️ Lifting capacity approx. 1200 kg ➡️ Dimensions (L x W x H): 4500 x 1300 x 2550 mm ➡️ Tipping height 2.83 m ➡️ All-wheel drive ➡️ Soft hydraulics ➡️ Euro 5 engine ➡️ Articulated steering with pendulum axle ➡️ Comfort cabin ➡️ Bucket 0.6 m³ ➡️ Hydraulic oil cooler ➡️ Cab and windshield can be heated with a fan ➡️ Radio with MP3 ➡️ Adjustable steering column ➡️ Additional controls ➡️ Automatic selection of low and high gear ➡️ 2-stage torque converter transmission electrically controlled ➡️ UVV NEW 1 year Optional: ➡️ Road approval ➡️ Rear view camera ➡️ Air-suspended comfort seat and retractable safety belt ➡️ Electric joystick for moving forward and backward with thumb on the joystick ➡️ Tires as in picture 31/15.5/15 with AS profile (not standard 12.5/16) ➡️ 3rd & 4th control circuit with separate small joysticks ➡️ Floating function ➡️ Stainless steel exhaust Gjdpsxx Nyhsfx Afuekc ➡️ Combined pallet fork with attachment and tines ➡️ Euro attachment with hydraulic locking pins Net 10,499.00 € +19% VAT 1,994.81 € Gross 12,493.81 € Josan – the future of construction Innovative, robust & affordable. *Please inform yourself about our warranty conditions. Images/text and equipment may vary. Errors and omissions excepted.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: C-13-309-02, input voltage: 400 V, overall weight: 900 kg, Take the opportunity to purchase a high-quality used Carat grinding & polishing station: This set consists of a control cabinet and two precision polishing machines, equipped with robot connection for maximum efficiency. Ideal for professional applications in the industry. Matching robots can be offered separately. Year of construction: 05.2013 Gkedpfx Aeuzyctsfuoc Total height: 240 cm Air pressure: max. 6 bar Rated current: 11.5 A Rated power: 5.5 kW Scope of delivery: 3 pallets with 2 polishing machines & 1 control cabinet

Condition: new, functionality: fully functional, mileage: 10 km, gearing type: hydrostat, fuel type: diesel, overall weight: 21,000 kg, empty load weight: 21,000 kg, Year of construction: 2025, operating hours: 10 h, I am offering a brand-new Zoomlion ZE210GLC crawler excavator with an operating weight of 21 tonnes. The machine is available immediately and is ideal for large-scale earthmoving, roadworks, construction, as well as industrial applications. - Year of manufacture: 2025 - Powered by a Cummins B6.7 engine with 129 kW output, providing high performance, reliability, and compliance with current emission standards - The operator’s cab is spacious, comfortable, and equipped with air conditioning, an ergonomic seat, a rear-view camera, and ROPS/FOPS safety systems - Variable displacement axial piston pump delivers a maximum flow rate of 2 × 220 litres per minute. The machine comes factory-fitted with a quick coupler and complete hydraulic installation for operating additional attachments such as hydraulic breaker, grapple, or shear - Maximum digging depth is approximately 6.7 metres - The machine is stable, robust, and ready for intensive operation in demanding terrain conditions - Manufacturer’s warranty included - VAT invoice issued - Additional attachments available separately – we offer a wide selection of accessories to tailor the machine to specific tasks - Machine available immediately with personal collection in Kolbudy or delivery within Poland - Transport to the selected port and support with international logistics available Financing options available: We offer leasing or credit purchase options. We assist in selecting the most suitable financing solution and handle all formalities. We cooperate with reputable financial institutions: Deutsche Leasing S.A / MLeasing Sp. z o.o. / Siemens Finance Sp. z o.o. / Pekao Leasing Sp. z o.o. / PKO Leasing S.A / PEAC Poland Sp. z o.o. / Nest Lease S.A / Alior Leasing Sp. z o.o. Financing terms: - Streamlined procedures up to PLN 1,000,000 - Down payment: from 0% to 45% - Financing period: up to 96 months - Currency: PLN or EUR Call or write for more information. I am happy to provide further details and help you choose the right attachments. This listing does not constitute a commercial offer as defined by Article 66 §1 of the Polish Civil Code. Gkodpfx Aoxwd Evjfuec

Year of construction: 2000, condition: excellent (used), maker: diverse (Europäische Union) year: 2000 tube Ø: 40 – 150 mm wall thickness: 1 – 4 (5) mm reference material (tensile strength): 1.000 N/mm² tube length shop entry: 4 – 10 m tube length shop exit: 4 – 8 m bundle weight: max. 3.000 kg bundle Ø: max. 600 mm working direction: left → right The shop consists of: • tube bundle destacker I with separation MAIR • tube straightender (10 rolls) BRONX type 10Cr.6-BWS • tube bundle destacker II with separation MAIR • wet separator HANDTE • tube bundle destacker III with separation MAIR • tube testing eddy current/ultrasonic ATM/KRAUTKRÄMER/FÖRSTER • multiple-head saw MAIR type MC150/7/10 • tube bevelling machine MAIR • brushing machine MAIR • destacker/stacker MAIR Gsdpfomqkt Tex Afujkc • tube bundle destacker MAIR • tube banding machine MAIR/ORGAPACK • emulsion treatment SCHOENAUER • control Siemens S7 • hydraulics

Year of construction: 2000, condition: excellent (used), maker: diverse (Europäische Union) year: 2000 tube Ø: 40 – 150 mm wall thickness: 1 – 4 (5) mm reference material (tensile strength): 1.000 N/mm² tube length shop entry: 4 – 10 m tube length shop exit: 4 – 8 m bundle weight: max. 3.000 kg bundle Ø: max. 600 mm working direction: left → right The shop consists of: • tube bundle destacker I with separation MAIR • tube straightender (10 rolls) BRONX type 10Cr.6-BWS • tube bundle destacker II with separation MAIR • wet separator HANDTE • tube bundle destacker III with separation MAIR • tube testing eddy current/ultrasonic ATM/KRAUTKRÄMER/FÖRSTER • multiple-head saw MAIR type MC150/7/10 • tube bevelling machine MAIR • brushing machine MAIR • destacker/stacker MAIR Gedpfx Afomqkuujuokc • tube bundle destacker MAIR • tube banding machine MAIR/ORGAPACK • emulsion treatment SCHOENAUER • control Siemens S7 • hydraulics

Condition: new, 1860 m³/h Pressung 2.900 Pa 1,1 kW filter surface area 10 m² Gjdpfxohp S Trj Afujkc 72 dB(A) 400/50 V/Hz 665 x 1100 x 1495 mm 200 kg - Hose arm 3 m, joints inside - Filter cartridge: dust class M - Pre-filter: baffle plate - Current type: 3Ph+N+PE The filter system ----- The mobile filter system of the Cartmaster IFA type is thanks to the automatic Cleaning particularly suitable for welding work with unalloyed and alloyed steels, galvanized material and aluminum with heavy smoke development. It corresponds to the safety requirements for devices Welding fume class "W3" (high-alloy steels with alloy components > 30% Nickel-based alloy).If used as intended, the system can be used for the Recirculation mode used because the requirements for the Exceptions according to TRGS 560 are fulfilled. That special developed, dirt-dependent cleaning system ensures a good cleaning behavior of the filter cartridge, so that an optimal suction performance is guaranteed throughout the operation. The cleaned particles fall into a dust collection drawer from which they can then be disposed of. The powerful spiral fan ensures even with saturated Filter cartridges for a high volume flow. The filter media ----- A baffle serves as a pre-separator for coarse particles. The filter cartridge installed below (dust class M, degree of separation > 99%) filters the finest smoke and dust particles. The cartridge is factory coated which increases the service life. The extraction arm ----- The extraction arm can be moved with the 3 internal joints Position spring support slightly and is in the set position cantilevered. A throttle flap integrated in the extraction hood enables the Flow rate setting.

Condition: new, bore capacity in steel (diameter) 30 mm throat 270 mm bore stroke 125 mm 4 Motor output 9 speeds 70 - 2800 U/min Column drilling machine OPTIdrill DP 33V promotion set / 3020680SET With an electronically controllable drive in a modern design * Industrial engine * Quiet running spindle thanks to new spindle design * Machine operation with safety electronics in 24 V direct current * Guaranteed concentricity = 0.02 mm in the measured drilling spindle * Clockwise/counterclockwise rotation * Precision spindle bore * Control panel with user-friendly, dirt and water resistant * Membrane keyboard * RPM display * Separate emergency stop button * Tapping function * Precisely crafted, stable drill table with diagonal T-slots with all-round cooling water channel, can be tilted sideways by ±45° and rotated by 360° * Drilling depth stop * LED machine light integrated in the drill head * V-belt cover with safety switch * Thick-walled steel column for high power absorption and stability * Solid, large base plate with T-slots * Execution of the entire machine Scope of delivery: - Keyless drill chuck 0 - 16 mm - T-Nuts -expectors - Operating tool Gkjdpfx Ajun Um Eefuoc - BMP 160 machine vice

Condition: good (used), Year of construction: 2010, functionality: fully functional, operating hours: 15,996 h, input voltage: 400 V, overall weight: 6,750 kg, 1000 KN Max. stroke: 200 Gjdpotwliwefx Afuokc Weight: 6750 Noise level: 74 dB Year of manufacture: 07/2010 Voltage: 400 V / 50Hz Rated current: Current operating hours: 15,996 hours with manual angle measurement and correction system with safety laser UVV inspection on a regular basis / maintenance always carried out by Amada on a regular basis Accessories: Tool die: 2 pieces UKB 20.478 V8/12 30° 835mm 3 pieces UKB 20.344 V4/V7 88° 835mm Tool holder: 4 pieces UKB substructure for double V die 20.287 + 60.919 835mm Bending swords: 5 pieces UKB 10.261 H100 R0.6/90° 2 pieces UKB 11.158 H80 R0.6/30° 2 pieces UKB 11.200 H66 R0.8/90° Other: Light barrier in need of repair (new price approx. €4500) – separately as a replacement as an attachment (has been renewed) The machine can be inspected under power in DE84051 Mettenbach by appointment. Sale only to commercial customers and with exclusion of any warranty!