Used Stick Stick for sale (597)

Year of construction: 2020, condition: as good as new (ex-display), Demo tool: SDT 200 ASD (ATEX) Ultrasonic Multifunction Detector Set. Composed of: 1 x SDT 200 (ATEX) receiver with digital display (numeric) for static peak value detection incl. battery block Monitoring indicators for reliable diagnostics in wear monitoring: RMS. PEAK and Crest factor, integrated data logger for 4000 measurements at 500 locations (grouped by sensor, date and time) 1 x Charger 1 x Peltor Headphones 130 dB 1 x Shoulder Strap 1 x Directional Probe (Screw Tip & Rubber Tip) 1 x plastic case with insert 1 x Instruction manual on USB stick 1 x USB cable for data transfer 1 x calibration certificate (as of 02/2020) 1 x Flexible sensor Atex 550 mm with replaceable sensor head 1 x Spiral Cable 1 x Funnel Directional Probe for SDT200 1 x leakage trailer 1000 pieces (to mark compressed air leaks) Other leakage meters on request. Visit our store. Nwjdpfx Aepyg Saei Ton We always have a wide range of new and used compressors in stock!

Condition: ready for operation (used), Year of construction: 2016, A complete SML winder including core magazine is available. Infeed part roll width: 2600mm, max. film end width: 2350mm, winding shafts: 6/3 inch, max. mechanical speed: 250m/min, max. roll diameter: 980mm, film thickness range: 15µm-2500µm, core diameter: 3 inch, core type: cardboard/plastic, roll change time: 4min, deposit capacity 2nd table: 15 rolls, power requirement: 52kW, edge trimming: In-Line, Knife type: free cut with razor blade, Winder mode: gap/contact, Roll delivery: 3-axis robot. Including non-stick rollers, linear guide, scale, robot and core magazine. Documentation available. On-site inspection is possible. Nsdpfx Aievripys Tewn

Condition: new, Year of construction: 2026, functionality: fully functional, Precise and clean edge processing without the need for extensive post-processing of the workpieces. The corner profiling unit handles the final corner processing. With a compact design of only 3.60 m in overall length, even short workpieces of just 120 mm (200 mm with corner rounding) can be processed professionally. Equipped with a joining unit with 2 diamond-tipped joining cutters, a Teflon-coated gluing unit, a pre-trimming unit, an HF miter saw station (motor with 2 saw blades), an HF combination milling unit, and an HF corner profiling unit. Controlled via a rotating 10-inch color touch screen. Nedpfx Aoza D S Aei Tswn Special accessories included: • Radius scraper blade • Surface scraper blade • Cleaning spray unit • Anti-stick spray unit

Condition: used, mileage: 32 km, power: 96 kW (130.52 HP), first registration: 08/2026, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: automatic, number of seats: 6, total length: 5,981 mm, total width: 2,474 mm, total height: 2,533 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), parking heater, soot filter, Internal Number: 4967.NW26.TL18377 Errors and prior sale excepted! ----SPECIAL EQUIPMENT * Rear air conditioning - rear water heater - automatic climate control * Seat Package 3A: Driver's seat, 10-way electrically adjustable - passenger double seat - passenger seat, 2-way manually adjustable - headrests, height-adjustable - driver's seat & passenger seat (outer seat), individually and variably heated - tray on the passenger double seat (foldable) - interior armrest for driver - lumbar support for driver - airbag, passenger side - side airbags, left & right - head/shoulder airbags, left & right - seat cover: fabric - heated steering wheel - leather steering wheel * Seats: Deletion of rear seats * Auxiliary Heater Package 2: Auxiliary heater (fuel-powered auxiliary heater), programmable, incl. remote control, incl. 2 batteries and theft alarm system * Conversion to ambulance: ramp (2600x1000, lateral gas struts, anti-slip, pinch protection in yellow, maximum load 350 kg) - system floor - wheelchair and passenger restraint system - storage box - additional flashing lights - step - Linea individual seats FURTHER EQUIPMENT * Axle load increase - front to 1850 kg * Airbag, driver's side * ABS with electronic brake force distribution - ESP with traction control - hill start assist - crosswind assist - safety brake assistant - rollover protection - emergency brake assist incl. emergency brake light Nsdpfx Aezh Smpsi Tswn * Exterior mirrors, electrically adjustable and heated * Battery: Battery runtime, programming of the battery runtime to 10 min * Floor, rubberized, full vehicle length * On-board computer with fuel consumption and mileage information (e.g. remaining range) as well as outside temperature display and Ford ECO mode * Headliner in driver's cabin and in the passenger compartment * Double-wing rear door with 180° opening angle (with window) - with heated rear windows, rear window wiper incl. windshield washer nozzle and automatic activation when reversing * Vehicle modem - incl. live traffic information and WLAN hotspot 5G modem (up to 5G/LTE, for up to 10 mobile devices) * Windows, 2nd row: fixed side windows, right and left * Power windows, front - with quick-down/-up function for driver's side * Parking brake, electronic * Ford Easy Fuel - comfort fuel filler flap and misfueling protection * Windshield, heated * Glove compartment with lockable lid * Infotainment: 12-inch multi-function display and Ford SYNC 4 voice control extended Bluetooth hands-free system USB interface SMS read-out and sending function Integration of storage media (e.g. USB sticks or MP3 players) for playing music Emergency call assistant Ford Power-Up software updates (over-the-air update technology) Digital user manual AppLink (wireless) Android Auto, Apple CarPlay Capacitive touchscreen technology 15 different languages, graphical and acoustic * Interior lighting - additionally with reading lamps in the front * Cargo area lighting * Driver fatigue and attention warning system incl. driver camera * Package: Technology Package 2 - Ford Audio System 2 - fog lights - LED downlight - Pre-Collision Assist, radar-based - Lane Keeping Assist - Traffic Sign Recognition System - Park Pilot System rear - Park Pilot System front - Cruise control - Rearview camera * Particulate filter: Diesel particulate filter * Tire pressure monitoring system * Wheels: Wheel covers * Wheels: Steel wheels 6.5 J x 16 with 235/65 R 16 tires * Windshield wipers with rain sensor * Headlights, low beam: H

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Panels thickness (min/max) mm 12 - 40 Working width (min/max) mm 250 / 2500 Numerical Control /Software Power Control 22 / woodCommander Adjustable feeding speed (m/min) 15 - 35 Safety and sound-proof enclosures/cabins Distance (center-axes) of the Disappearing Dogs (mm) 1000 SIZING PART (for each side): Spraying unit (Anti-sticking liquid) Nwedpfx Aiezrd Rzo Ten Anti-chipping Milling Unit (1 x Kw 4,5) Hogging Units KD 11 (2 x Kw 6,6) EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt + Quick Melt Unit) A3 Pressure zone A Edge coils supporting unit (No. 2 of reels) with servo-assisted edge feeding Snipping Unit HL86 (2 x Kw 0,22) Rough Trimming Unit BF10 (2 x Kw 0,55) Fine Trimming Unit PF20 (2 x Kw 0,4) FRRE SPACE for Corner Rounding unit ( Contour Trimming) FF 12 (2 x Kw 0,4) Profile Scraping unit PN 10 Finish processing unit (Glue scraper + Buffing unit) FA 11 Spraying Unit (for polishing liquid)

Condition: ready for operation (used), Year of construction: 2015, machine/vehicle number: AB/224221, functionality: fully functional, operating hours: 19,402 h, working width: 900 mm, milling spindle speed (max.): 18,000 rpm, working length: 3,050 mm, Equipment: CE marking, TECHNICAL DETAILS Working area, X-axis: 3,050 mm Njdpfx Ajzrmn Nei Tswn Working area, Y-axis: 900 mm Working area, Z-axis: 60 mm Controlled axes: 1 Milling spindle Number of milling spindles: 1 Max. spindle speed: 18,000 rpm Main motor power: 5.6 kW Tool clamping system: ISO 30 Table design: Flat table Table length: 3,960 mm Table width: 840 mm Material clamping system: Pneumatic Drilling unit Motor power: 2.64 kW Horizontal drilling spindles: 6 Vertical drilling spindles: 11 MACHINE DETAILS Software: SCM Maestro Voltage: 400 V Current consumption: 35 A Fuse rating: 63 A Connected load: 10.0 kW Dimensions & Weight Installation dimensions (L x W x H): 4,500 x 1,900 x 2,250 mm Transport dimensions (L x W x H): 2,500 x 1,900 x 2,250 mm Transport weight: 1,600 kg Transport packages: 1 Operating hours: 19,402 h EQUIPMENT Tools Documentation CNC documentation on USB stick User keys/licenses CE marking Saw unit Door interlock switch Safety light curtain Drilling tool

Condition: good (used), Moving bezel, bezel, setting stick, lynette Nwodpfx Aiezmf Hyo Ton -Bezel: riding along -Peak height: 133 mm -Dimensions: see photos -Dimensions: 225/180/H200 mm -Weight: 1.2 kg

Condition: ready for operation (used), Year of construction: 2004, operating hours: 13,222 h, functionality: fully functional, machine/vehicle number: KH630338, travel distance X-axis: 950 mm, travel distance Y-axis: 825 mm, travel distance Z-axis: 760 mm, controller model: Fanuc Series 18i-MB, spindle speed (max.): 4,500 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel distances Travel distance X-axis: 950 mm Travel distance Y-axis: 825 mm Travel distance Z-axis: 760 mm Nedpfx Aoztpixji Town Working area max.: Ø 1,120 × 875 mm Distance from table surface to spindle center: 175–935 mm Distance from table center to spindle nose: 0–825 mm Spindle Spindle mounting: NT50 Spindle speed: 4,500 rpm Spindle motor power: 22 kW Gear stages: 2 Cooling: Cooling through the spindle Pallet Pallet size: 630 × 630 mm Maximum pallet load: 1,000 kg Tool changer Tool positions: 40 Maximum tool diameter: Ø 110 mm Tool diameter without neighboring tool: Ø 245 mm Maximum tool length: 600 mm Maximum tool weight: 20 kg Tool change time tool-to-tool: 6 s MACHINE DETAILS Control: Fanuc Series 18i-MB Operating hours (as of 05/12/2026) Power-on hours: 71,457 h Operating hours: 28,051 h Spindle running time: 13,222 h Dimensions & Weight Dimensions (L x W x H): 3,610 x 5,320 x 3,140 mm Machine weight: 14,000 kg Weight of dual pallet changer: 2,000 kg Total weight: 16,000 kg EQUIPMENT Dual pallet changer Spindle cooling Oil cleaner Chip conveyor Cooljet Systems oil cooler Tools in the machine Tools on 2 tool carts Operating manuals Parameter backup on USB stick Note: The machine is in operation until disassembly. Before collection, it will be disconnected from the power supply, and the oil will be drained. The backup batteries were replaced on 06/01/2023. In addition, an updated parameter backup will be created before the power is shut off.

Condition: ready for operation (used), Year of construction: 2016, Bizerba A550 Slicing machine Nsdpjy Ndukofx Ai Tewn Suitable for cooked meat, bacon, cheese Capable of stacking, shingling into groups Wire mesh conveyor belt Year 12-2016 In excellent working condition New blade Inverter fitted With new non stick slicing blade fitted, New slice thickness motor fitted New rubber bands fitted on stacking conveyor

Condition: used, Year of construction: 2005, operating hours: 8,840 h, 2005 | Komatsu PW160-7K | Used Wheeled Excavator | 8840 hours 📍Location: Switzerland 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! Nsdpfxjzumgds Ai Tswn 💰 Buy Now for EUR 25900 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 55 inspection points 42 approved ✅ 12 imperfect ℹ️ 1 issues ⚠️ 📌 Inspector's Comment: Machine in working condition, boom and stick with noticeable play, air conditioning compressor not connected, engine runs unevenly at partial and full load, performance still good 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "41171 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: new, Year of construction: 2025, warranty duration: 36 months, New machine 3-year warranty including delivery* & instruction in your bakery * Ground-level installation and sufficient door widths required Advantages: + unbeatable price-performance ratio + modern, volumetric dough dividing machine (gentle on the dough, without vacuum!) + particularly suitable for soft wheat-rye mixed dough + extended weight range possible with double piece output (60 - 740 g piece weight) + revolutionary dough dividing system requires minimal cleaning effort Nsdpfxewyu Upo Ai Tjwn + no dough residue in the drum at the end of the production cycle + dividing the dough without unnecessary stress and compression of the dough + high precision of the dough weights at the same time + pressure lubrication with oil circulation and filtration, very low oil consumption + easier filling of the dough hopper due to low height + height-adjustable conveyor belt can be selected + ejection onto a table or other machines (rounder, etc.) possible STANDARD equipment: + weighing chamber made of stainless steel + robust Construction: steel frame, stainless steel housing + Double piece function (only for model with 1 piston) + Touchscreen control with self-cleaning program >> Setting the hourly output / piece counter / piece weight >> Programming and naming of recipes >> Reading the production statistics + Electronic speed setting + Electronic weight setting + Electronic piece counter + Teflon-coated stainless steel funnel (conical or square depending on size), + 40 kg dough capacity with safety grid in accordance with CE >> Other funnel sizes available for a small additional charge (80 / 120 / 160 / 200 / 300 kg dough) + Separately driven and height-adjustable output belt + Adjustable flour sprinkler, prevents dough pieces from sticking to the output belt + Scraper on the dough output belt Technical data: Capacity: 900 - 2500 pieces per hour (depending on dough) Unit weight: 30 - 370 grams (depending on dough) Piston: 1 dough part piston (diameter 80 mm), 1-row dough output Power: 2.45 kW Connection values: 400V - 3Ph- 50Hz Fuse: 16A-CEE plug Dimensions of machine in working position: 1120-1136 x 626 x 1501 mm (WxDxH) Dimensions of machine in resting position: 1052 x 626 x 1501 cm (WxDxH) Input height with 40 kg hopper: 1501 mm Net weight: 410 kg SPECIAL accessories, prices on request: - Stainless steel drag for pre-wrapping - Frequency converter for continuously adjustable speed of the dough output belt - Take-off roller on chamber output - Short rounding bar - Higher ground clearance 10/15/20 cm - Additional power connection for connection to work table / rounding beam etc. >> 400 V high current / 3 Ph >> 230 V light current / 1 Ph or 3 Ph

Condition: new, Year of construction: 2025, warranty duration: 36 months, New machine 3-year warranty including delivery* & instruction in your bakery * Ground-level installation and sufficient door widths required Advantages: + unbeatable price-performance ratio + modern, volumetric dough dividing machine (gentle on dough, without vacuum!) + particularly suitable for soft wheat-rye mixed dough + extended weight range possible with double piece output (100 - 1400 g piece weight) + revolutionary dough dividing system requires minimal cleaning effort + no dough residue in the drum at the end of the production cycle + dividing the dough without unnecessary stress and compression of the dough + high precision of the dough weights at the same time + pressure lubrication with oil circulation and filtration, very low oil consumption + easier filling of the dough hopper due to low height + height-adjustable conveyor belt can be selected + ejection onto table or other machines (rounder, etc.) possible STANDARD equipment: + weighing chamber made of stainless steel + robust Construction: steel frame, stainless steel housing + Double piece function (only for model with 1 piston) + Touchscreen control with self-cleaning program >> Setting the hourly output / piece counter / piece weight >> Programming and naming of recipes >> Reading the production statistics + Electronic speed setting + Electronic weight setting + Electronic piece counter + Teflon-coated stainless steel funnel (conical or square depending on size), + 40 kg dough capacity with safety grid in accordance with CE >> Other funnel sizes available for a small additional charge (80 / 120 / 160 / 200 / 300 kg dough) + Separately driven and height-adjustable output belt + Adjustable flour sprinkler, prevents dough pieces from sticking to the output belt + Scraper on the dough output belt Technical data: Capacity: 900 - 2500 pieces per hour (depending on dough) Unit weight: 70 - 1400 grams (depending on dough) Piston: 1 dough part piston (diameter 70 mm), 1-row dough output Power: 2.45 kW Connection values: 400V - 3Ph- 50Hz Fuse: 16A-CEE plug Dimensions of machine in working position: 1120-1136 x 626 x 1501 mm (WxDxH) Dimensions of machine in resting position: 1052 x 626 x 1501 cm (WxDxH) Input height with 40 kg hopper: 1501 mm Net weight: 410 kg Nwsdpfxjwyu Uvo Ai Ten SPECIAL accessories, prices on request: - Stainless steel drag for pre-wrapping - Frequency converter for continuously adjustable speed of the dough output belt - Take-off roller on chamber output - Short rounding bar - Higher ground clearance 10/15/20 cm - Additional power connection for connection to work table / rounding beam etc. >> 400 V high current / 3 Ph >> 230 V light current / 1 Ph or 3 Ph

Condition: new, neu ca. 2 - 4 Wochen ab Auftr 2590 € 16 mm The set for everyday and universal use with an extensive range of clamps, brackets and clamping options. Including tool trolley for an optimised and fast workflow. Consisting of: 10 screw clamps 180° HIS16Z3000 4 screw clamps 45° HIS16Z3045 4 V-support HIS16VP100 8 stop brackets 90x37, 5mm HIS16WA9037 8 pieces stop bracket 90x90mm HIS16WA9090 2 pieces stop bracket 300mm HIS16WA300 1 piece stop bracket 500mm HIS16WA500L 1 piece stop bracket 500mm HIS16WA500R 4 pieces stop bar 75mm HIS16FA075 8 pieces stop bar 115mm HIS16FA115 28 pieces quick clamping bolt short HIS16SB100 1 piece cleaning brush HIS16RB 1 piece torch holder HIS16BH 1 piece cleaner HIS- Cleaner-1L Nwodpfsyq Sqhox Ai Tjn 1 piece Anti-stick agent HIS-Premium-1L

Condition: new, Year of construction: 2023, total length: 40 mm, total width: 1,000 mm, Empty weight: 37.000 kg Productivity: 1000 tph 1000x44400mm radial telescobic conveyor General Tech Spec of 150 Feet Radial Belt Conveyor Drive System Direct Accoupled Drive Drum 323* 12 mm rubber coated Reducer Yılmaz KR Series-VOLT 50hz-380V Bed Type SNH Series Felt Cast Iron Bed with Over Lubrication Platform Single Sided Walkway on main belt Band Tape TS 542 Norm 4 Layers, 4/2,10mm Width Direction Roll 12 units Nominal Capacity 800-1000 tph Drive 2.5” Standard Kingpin Paint Acrylic Raised stockpile height 15 meters Lowered stockpile height 4,3 meters Belt widths: 1200mm(26 meters)-1000mm(22 meters) Stinger width 1000* 19000mm Radial Drive Eletrical Motor/Gearbox connected to wheels by chain Radial Move 5 degrees Belt Rear Mounted on static pivot Stockpile capacity at 270 degrees15m height 140900 metric tons Drum 323mm dia, anti material sticking Main Belt 2x22 kw Motor Gearbox Stinger Belt Conveyor 2x22 kw Motor Gearbox Radial Tires 8 pcs- 315*65*22,5 Chained to Motors Radial Drives 2 pcs 3 kw Motor Gearbox Total Power 95 kw Transport Weight 35 tons Transport Dimensions 4400x29300x3500mm Control Full Automatic remote controlled Automation component Siemens Radial Tyres Hydraulic Swing for erection Erection Hydraulic Jacks for elevation Scraper Available at main belt and receiving hopper Cleaning Both belts have cleaning scraper under drive drum Receiving Chute included Discharge Chute to stinger belt Included Impact rolls Included at receiving chute section Control panel LCD screen and piano panel for back-up Nwsdpex D A S Uefx Ai Ton With Polypole automatic piling software and Siemens PLS option Fast delivery, high,quality, economical

Condition: new, Year of construction: 2025, warranty duration: 36 months, New machine 3-year warranty including delivery* & instruction in your bakery * Ground-level installation and sufficient door widths required Advantages: + unbeatable price-performance ratio + modern, volumetric dough dividing machine (gentle on the dough, without vacuum!) + particularly suitable for soft wheat-rye mixed dough + extended weight range possible with double piece output (400 - 3300 g piece weight) + revolutionary dough dividing system requires minimal cleaning effort + no dough residue in the drum at the end of the production cycle + dividing the dough without unnecessary stress and compression of the dough + high precision of the dough weights at the same time + pressure lubrication with oil circulation and filtration, very low oil consumption + easier filling of the dough hopper due to low height + height-adjustable conveyor belt can be selected + ejection onto a table or other machines (rounder, etc.) possible STANDARD equipment: + weighing chamber made of stainless steel + robust Construction: steel frame, stainless steel housing + Double piece function (only for model with 1 piston) + Touchscreen control with self-cleaning program >> Setting the hourly output / piece counter / piece weight >> Programming and naming of recipes >> Reading the production statistics + Electronic speed setting + Electronic weight setting + Electronic piece counter + Teflon-coated stainless steel funnel (conical or square depending on size), Nedpfsvw R Ihsx Ai Tswn + 40 kg dough capacity with safety grid in accordance with CE >> Other funnel sizes available for a small additional charge (80 / 120 / 160 / 200 / 300 kg dough) + Separately driven and height-adjustable output belt + Adjustable flour sprinkler, prevents dough pieces from sticking to the output belt + Scraper on the dough output belt Technical data: Capacity: 900 - 2500 pieces per hour (depending on dough) Piece weight: 200 - 1650 grams (depending on dough) Piston: 1 dough part piston (diameter 150 mm), 1-row dough output Power: 2.45 kW Connection values: 400V - 3Ph- 50Hz Fuse: 16A-CEE plug Dimensions of machine in working position: 1120-1136 x 626 x 1501 mm (WxDxH) Dimensions of machine in resting position: 1052 x 626 x 1501 cm (WxDxH) Input height with 40 kg hopper: 1501 mm Net weight: 410 kg SPECIAL accessories, prices on request: - Stainless steel drag for pre-wrapping - Frequency converter for continuously adjustable speed of the dough output belt - Take-off roller on chamber output - Short rounding bar - Higher ground clearance 10/15/20 cm - Additional power connection for connection to work table / rounding beam etc. >> 400 V high current / 3 Ph >> 230 V light current / 1 Ph or 3 Ph

Condition: used, mileage: 32 km, power: 110 kW (149.56 HP), first registration: 01/2025, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: automatic, emission class: euro6, number of seats: 8, total width: 2,474 mm, total height: 2,533 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Internal number: 5147.CHO25.PY07596 ---- Errors and omissions excepted! SPECIAL EQUIPMENT * Bi-Xenon headlights with static cornering lights, LED daytime running lights * Windows, 2nd row of seats: Sliding windows, left and right * Ford audio system with 12-inch multifunction display and Ford SYNC4 - Radio - DAB/DAB+ - FordPass Connect including live traffic information - Wi-Fi hotspot - Audio remote control on the steering wheel - Bluetooth - USB port - Hands-free system - Emergency assistance - Android Auto and Apple CarPlay - Touchscreen - Integration of storage media (e.g. USB sticks or MP3 players) - Extended voice control * Front mud flaps * Seat package 27: Driver's seat with 4-way electric adjustment - Passenger seat - Interior armrest for driver and passenger - Lumbar support for driver and passenger - Height-adjustable headrests - Heated seats for driver and passenger - Seat upholstery: fabric * Technology package 13: Heated windshield - Windshield wipers with rain sensor - Parking pilot system front and rear, additionally with side sensors - Active emergency braking assistant (radar-based) - Lane keeping assistant with driver drowsiness alert and high beam assist, additionally with lane keeping aid and lane change assistant - Headlight assistant with day/night sensor - Blind spot assistant - Adaptive cruise control - Rear view camera - LED downlight - Fog lights - Exterior mirrors, electrically adjustable, foldable and heated - Automatic climate control * Heat-absorbing glass, medium tint level of side windows from the B-pillar Nwedpfx Ajyf Sqqji Ton FURTHER EQUIPMENT * 1 battery * Airbags for driver and front passenger * ABS with electronic brake force distribution * Exterior mirrors, electrically adjustable and heated - with integrated turn signals * Battery: Battery runtime, programming the battery runtime to 10 minutes * Floor, rubberized (in driver's cabin and passenger compartment) * On-board computer with consumption and mileage information (e.g. remaining range) as well as outside temperature display and Ford ECO mode * Headliner, complete * Double-wing rear door with 180° opening angle (with window) - with heated rear windows, rear window wiper including windshield washer nozzle * ESP with traction control - Hill start assist - Crosswind assist - Safety brake assist - Rollover protection - Emergency brake support including emergency brake light * Passenger compartment lighting with delayed switch-off * Windows, 2nd row: Side windows fixed, left and right * Electric windows - with quick-down/up function for the driver's side * Ford Easy Fuel - Comfort fuel filler cap and misfueling protection * Generator, high-performance version * Cruise control * Glove compartment with lockable lid * Interior lighting with delayed switch-off with front reading lights * Fuel tank 70 l * Steering wheel: Artificial leather steering wheel * Steering column, adjustable in height and reach * MyKey key system - individually programmable second key * Active emergency braking assistant - (camera-based) * Package: Technology package 9 - Windshield, heated - Windshield wipers with rain sensor - Parking pilot system front and rear - Active emergency braking assistant (camera-based) - Lane keeping assistant with driver drowsiness alert and high beam assist, additionally with lane keeping aid - Headlight assistant with day/night sensor - Cruise control - Fog lights - Ford audio system 4" multifunction display * Parking pilot system front and rear * Particulate filt

Condition: new, Year of construction: 2025, Vertical packaging machine including dosing system(s) with 8 manufacturing lanes to produce "stick-packs" with back center sealing (alternativ: 3-/4-side sealing - surcharge applies) to pack powder (pepper, milkpowder, etc.) - OMRON PLC and colour touchscreen, auto diagnostics. AIRTAC pneumatic parts, OMRON temperatur PID, SCHNEIDER and OMRON electronic parts. Film pulling, AB converter control, stainless steel version (SS304), auger filler with servo motor, with hopper. - Specifications: accuracy: +/-0,3-1%; max. speed of the machine in neutral: 8x60 cycles/minute; accuracy: +/-10%; suitable for all BOPP/PE and laminated films; bag sizes: L(50-350)xW(10-50)mm; power: 220V, 5.5kW; compressed air: 1.5m³/min, 6bar; machine dimensions: L1700xW1400XH1900mm; weight: 650kg. Nsdpfxev Nmf Hs Ai Town That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Year of construction: 2025, condition: new, Vertical packaging machine including dosing system(s) with 12 manufacturing lanes to produce "stick-packs" with back center sealing (alternativ: 3-/4-side sealing - surcharge applies) to pack powder (pepper, milkpowder, etc.) - OMRON PLC and colour touchscreen, auto diagnostics. AIRTAC pneumatic parts, OMRON temperatur PID, SCHNEIDER and OMRON electronic parts. Film pulling, AB converter control, stainless steel version (SS304), auger filler with servo motor, with hopper. - Specifications: accuracy: +/-0,3-1%, max. speed of the machine in neutral: 12x60 cycles/minute; accuracy: +/-10%; suitable for all BOPP/PE and laminated films; bag sizes: L(50-350)xW(10-30)mm; power: 220V, 7.5kW; compressed air: 1.5m³/min, 6bar; machine dimensions: L1900xW1500xH1900mm; weight: 880kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Nedpfxev Nmgde Ai Tjwn

Condition: new, Year of construction: 2025, Weighing unit with 14 weighing heads (containers) for very precise weigh checking, with 2.5-Liter volume each. Special design to suit stick shaped products; reversible vibration motor and V-shaped feeder allows control of product movement. - Specifications: max. speed of the machine in neutral: 80 cycles/minute; weighing range: 10-1000g; accuracy +/-0.1-2.0g; touchscreen operation; stagger dump; double door hopper to allow faster dropping; stainless steel; 220V, 2.0kW; L1602xW1136xH1561; 600/650kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Nwjdpfxev Nmqvs Ai Ten Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: used, TIG and Electric Welding Machine / Inverter ESAB Type LTN 160 TIG Welding Machine for TIG and Electrode Manufacturer No. 405-423-0479 Year of manufacture approx. 2010 TIG Output 160 Amps = 35% duty cycle 110 Amps = 60% duty cycle 80 Amps = 100% duty cycle Electrode Output 140 Amps = 35% duty cycle 110 Amps = 60% duty cycle 80 Amps = 100% duty cycle Power supply 230 Volts, 50 Hz, Schuko plug - Continuous power adjustment - 2-stroke and 4-stroke operation - Stick electrode operation - 12-meter TIG hose package with hand torch - Direct current only (DC) - HF ignition - Shielding gas pressure regulator - Mobile trolley with cylinder holder Nedpfx Aov Uragsi Tswn Space requirements L x W x H 800 x 690 x 1120 mm Weight 60 kg Good condition

Condition: new, Year of construction: 2025, Automatic skin pack packaging machines for better operability and greater production. In concrete terms, skin pack means anchoring an object firmly with a plastic film on a cardboard base. This film is heated and "softened" by a radiant heating plate, adheres to the cardboard due to the vacuum effect and sticks to it, the contours of the object being perfectly traced Skin packaging machine in compact design with complete basic equipment as follows: Nwjdpfx Aiehga Sve Ten - with integrated high-performance vacuum pump - Loading table for skin cardboard - Removal table for separating the packs - automated motion sequence - electronic regulation of the heating temperature - energy-saving heating - stepless adjustment of the vacuum time Warranty: 12 months (single-shift operation), Technical specifications Skin cardboard: 345 x 495 mm Foil width: 390 mm max.good height: approx. ca.100 mm Heating capacity: 3.5 kW Footprint: L x W x H: 1650 x 1000 x 1400 mm Machine weight: approx. 110 kg Vacuum pump: 11 mc / h Power connection: 230 volts, 50 Hz

Condition: excellent (used), Year of construction: 2008, For sale complete PVC carpentry production line, brand URBAN, composed of: *1. Welding machine at 2 ends; URBAN brand, model: AKS 5305-FF, serial number: 53372, year of manufacture: 2007, perfect working condition; *2. Channel milling machine; URBAN brand, model: WS 103, serial number: 790, year of manufacture 2007, perfect working condition; Nedpfx Ajucl Dcsi Tswn *3. 2-headed saw: brand RAPID, model DGS 100, serial number: 004606128, year of manufacture 2010, sold together with vacuum cleaner with bags, perfect working condition; *4. MACC rebar cutting saw, model NEW 275, serial number: 88266, year of manufacture 2008, perfect working condition; *5. Pantograph brand URBAN, model MLA A23 – 100466321S, serial number: 528-0, year of manufacture: 2008, perfect working condition; 6. Upright milling machine: URBAN brand, model M7CRH-100149891, serial number 559, year of manufacture 2008, perfect working condition; *7. De burring machine with 2 groups of cutters; brand URBAN, model SV 280, serial number: 29342, year of manufacture 2008, perfect working condition; *8. Saw for cutting sticks: brand URBAN, model GLS 102; serial number: 102015; year of manufacture 2010, perfect working condition; The production capacity of the line is 30-50 units/8h (depending on the number of people serving the line). The line was used very little from 2010 to 2014, and not at maximum capacity. We can also sell individual machines on request from the line. Net price complete line 33.500 Euro + VAT, negotiable, FCA Oradea.

Condition: like new (used), Year of construction: 2025, functionality: fully functional, total length: 1,010 mm, total width: 1,010 mm, total height: 2,010 mm, mesh size: 10 mm, Equipment: CE marking, Own production smoke trolleys, Lithuania currently offers 4 complete sets of drying trolleys with trays available from stock. Were used as a demonstration model in the showroom. Can be sent one set at a time. New price 3500 EUR per set Full manufacturer warranty is provided by HySpriz. This is an ideal trolley solution for drying products such as jerky, kabanos, fish snacks, and pet sticks. It is also suitable for fish defrosting processes and even baking applications. The mesh structure ensures excellent air convection through all product levels, resulting in uniform drying and stable product quality. We manufacture in Ukraine a heavy-duty stainless steel drying trolley, specifically designed for industrial and semi-industrial production of meat and fish snacks, raw-cured sausages, jerky, and pet treats. The trolley is fully compatible with RK50U, SAS200, and FARS200 systems and is ideal for use in drying chambers, smokehouses, and climate-controlled environments with air dehumidification. The external dimensions of the trolley are 2000 × 1010 × 1010 mm. Nwedpfxorftxfe Ai Ten The frame is made of corrosion-resistant AISI 304 stainless steel using a robust 40 × 40 × 1.3 mm profile. It includes 30 levels with a 55 mm spacing between tiers and special locking systems to prevent trays from falling during movement. For mobility, the trolley is equipped with six heavy-duty pendulum swivel casters (Ø125 mm), allowing full rotation even when loaded. Each trolley includes 60 stainless steel trays sized 900 × 500 mm. The trays are made of corrugated stainless steel mesh, 5x5 mm. can be optionally equipped with Teflon liners (5,8 EUR/pcs) Wire thickness is 0.7 mm for high rigidity. Each tray has a 15 mm perimeter rim for improved airflow and heat distribution. Reusable non-stick Teflon inserts are included, ideal for sticky or soft products. Total load capacity is up to 400 kg per trolley, with up to 7 kg per tray. The system supports both low-temperature dehydration and high-temperature processing. Compatible with chambers using horizontal or vertical airflow. Designed for easy cleaning, hygiene, and long service life. This trolley ensures efficient moisture removal and uniform air distribution, which directly improves drying performance and final product shelf life.

Condition: excellent (used), power: 129 kW (175.39 HP), operation weight: 18,800 kg, Year of construction: 2014, operating hours: 14,245 h, Equipment: air conditioning, cabin, CATERPILLAR M320F year: 2014 Nedpfjzud Apsx Ai Tjwn operation hours: 14.245 hrs. ROPS Airco Radio Back drive camera hydr. 2 piece boom stick: 2,50 meter all hydr. lines (hammer-, gripper-, scissor-) Pre-configured for the Trimble GCS900 Quick coupler OQ65 1 x Bucket with 800mm width central lubrication Camso tyres 10.00-20 approx 50% good blade support ( 2.5m width) CE Engine with 129kW Transport : 9x2.5x3.30m operation weight: 18.8 to.

Year of construction: 1996, condition: ready for operation (used), functionality: fully functional, Renholmen greensorting line 45 sorting pockets, sticking machine with sticks handling and Finnscan + OT-laite, speed is 100 m/min and it is fully automated line with stickhandling one operator, automation is made 2019 Workpiece length max - 6.100 mm Maximum sorting speed: 130-150 pcs/min Maximum capacity: 260,000 m3/year Nodpfx Asxg Rgxsi Tewn