Used Technolit Profimat 170 Plus for sale (7,500)

Condition: used, power: 125 kW (169.95 HP), Year of construction: 2026, operating hours: 118 h, Operating hours: 118, First registration: 04/21/2026 Max. lifting capacity: 5,000 kg Max. lifting height: 7,800 mm Max. outreach: 4,200 mm Length to carrier: 4,870 mm Width: 2,350 - 2,530 mm Height: 2,530 / 2,590 mm (CS activated) Total weight with load forks: 9,990 kg Total weight without load forks: 9,700 kg Engine: 4-cylinder FPT N454, displacement 5 l, water-cooled Power: 125 kW (170 hp) 2,300 rpm Stage V Diesel particulate filter, oxidation catalyst, and SCR catalyst with AdBlue injection (DPF + DOC + SCR) Hydrostatic drive Pump: electronically controlled with variable flow rate Motor: Swashplate motor EPD PLUS incl. with optional automatic speed increase Mineral hydraulic oil HVI 46 Transmission: 2 gears Electrohydraulically controlled Vmax = 1st gear / 2nd gear = 16 / 20 km/h, optional 40 km/h Cab: Enclosed cab Split door 360-degree all-round visibility ROPS/FOPS tested GRAMMER air-suspended seat with safety lap belt Heater Front, roof, and rear window wipers Sun visor 4x1 joystick, electronic with capacitive activation incl. direction of travel switch CS = hydropneumatic vibration damping of the cab Telescopic boom: 2-part with electronic end-of-stroke damping (Soft Stop) and telescopic arm suspension (BSS) Carrier: Quick-change system, type "ZM3" with triple locking, hydraulically controllable from the cab Leveling: hydraulically controlled Steering: Hydraulic steering 3 steering modes: All-wheel steering, front-wheel steering, crab steering Drive: Permanent all-wheel drive Axles: Front axle manually adjustable Rear axle oscillating with differential lock Braking system: Disc brakes on all 4 drive axles Automatic parking brake when engine is stopped Frame design: Made of high-strength steel Hydraulic system: Pump with variable flow rate, type "LOAD SENSING" Flow rate max. 160 l/min Pressure max. 250 bar Flow-sharing control block Hydraulic quick-coupling system Electrical system: 12 V Battery with 100 Ah Alternator 120 A Stabilization control: computer-assisted (ASCS system) with fully electronic stability control and simple weighing function, audiovisual signal and overload shut-down as well as implement recognition Display in the display Warning and shut-down in case of overload Tires: 500/70 R24, agricultural lug profile Additional equipment: EU approval as a tractor/agricultural tractor 40 km/h incl. trailer hitch, height-adjustable, self-locking, 37/38 mm pin, incl. connection for trailer lighting Hedpfx Aszpcu Todzer Air conditioning LED work lights on the cab (2 front, 2 rear) instead of the standard halogen headlights 360° LED work lights (incl. 2x LED at the end of the first arm + 4 more LED lights on the machine) Double rear hydraulic connection with switchover Location: 54595 Prüm

Condition: used, Year of construction: 2005, operating hours: 8,315 h, Stock number: 5799 Hedpfxezntg Rj Adzor New Holland MH Plus mobile excavator with variable-geometry boom and 2-jaw grapple ----* Manufacturer: New Holland * Type: MH Plus * Year of manufacture: 2005 * kW: 98 kW / 133 hp * Tires: 10.00 - / Dual tires * Operating hours recorded: approx. 8,315 hours * Color: Yellow * Enclosed cabin * Variable-geometry boom * Grapple * 270-degree camera * Rotating beacon * Maximum speed: km/h * Additional hydraulic connections * Work lights on the front of the cabin roof * 270-liter diesel tank * 140-liter hydraulic tank Note regarding possible errors in the advertisement: Despite careful preparation of the advertisement, isolated errors may have occurred in the text or information. We assume no liability for errors, changes, or sales to other parties. All information is provided without guarantee. Please contact us to verify details or clarify any further questions.

Condition: good (used), machine/vehicle number: 50815346737494, Year of construction: 2022, operating hours: 706 h, load capacity: 2,700 kg, lifting height: 5,900 mm, fuel type: diesel, mast type: other, overall weight: 4,850 kg, 4892773 Unser Merlo P27.6 PLUS Teleskopstapler ist ein leistungsstarker Stapler, der sich ideal für vielseitige Einsätze im Innen-, Außen- und Gelände eignet. Mit einer Hubhöhe von 5,90 Metern und einer maximalen Traglast von 2.700 kg ist er perfekt für anspru... Hedpfx Aezqbydodzor

Condition: used, mileage: 32,169 km, power: 137 kW (186.27 HP), first registration: 09/2024, fuel type: diesel, number of seats: 34, gearing type: automatic, next inspection (TÜV): 09/2026, emission class: euro6, color: white, brakes: retarder, Year of construction: 2024, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, ? REAR PARKING SENSOR ? SAFETY HAMMER, CABLE ? PREPARATION FOR REAR TRAILER HITCH FOR LD VEHICLES, 3.5 TONS ? TRAILER SOCKET, 13-PIN Hjdpfeyw Eywsx Adzjr ? REVERSING CAMERA ? HEATED WINDSCREEN ? CRUISE CONTROL ? INFO + DVD + MP3. BLUETOOTH (DAB+) ? SWAN DRIVER'S SEAT INFOTAINMENT ? FRONT MICROPHONE INFOTAINMENT ? SCHOOL ZONE SIGN, LED, 25x25 + 40x40 ? HEATER. 1ST DOOR AREA, 8 kW ? 2 PIECES, ELECTRICALLY ADJUSTABLE SUN VISOR ? 3-POINT SAFETY BELT ? USB CHARGER (UNDER THE SEAT)

Condition: used, functionality: fully functional, mileage: 298,800 km, first registration: 06/2023, fuel type: diesel, empty load weight: 7,983 kg, axle configuration: 4x2, wheelbase: 3,700 mm, fuel: diesel, fuel tank capacity: 935 l, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of beds: 1, total length: 5,890 mm, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 12,000 kg, Equipment: ABS, air conditioning, central locking, differential lock, fridge, navigation system, parking air conditioner, parking heater, VOLVO FH13.500 Globetrotter Semi-trailer tractor unit 4x2 Front leaf spring suspension - rear air suspension Differential lock Hsdpfx Adozquxmjzsr Automatic transmission VEB-Plus GVWR 18,000 KG - Unladen weight 7,983 kg - Permissible total train weight 44,000 kg Total length of truck 5.89 m Wheelbase 3.70 m Sleeper cab with 1 berth Tires 40% tread ABS Euro 6 530L + 405L fuel tank Spoiler Full fairing Sun visor Round lights Bluetooth Fog lights Central locking Air-suspended driver's seat Auxiliary air conditioning Auxiliary heater Air conditioning Navigation system Refrigerator Electric windows and exterior mirrors Radio All information subject to change without notice; errors and omissions excepted.

Condition: good (used), Year of construction: 2013, Empty weight: 3.880 kg Lifting capacity: 200 kg Working height: 2.520 cm CE mark: yes Technical condition: good Visual appearance: good Delivery terms: EXW Max swing of platform in degrees: 180 Please contact Christian Theißen for more information Manufacturer: Teupen Model: Leo 25T Plus Year of build: 2013 Condition: Used Data: Max. working height: 25,20 m Platform height: 23,20 m Max. reach: 18,00 m Platform lifting capacity: 200 kg Hjdpozfiabsfx Adzor Platform dimensions LxW: 1,25 x 0,80 m Swivel range: 180° Total dimensions LxWxH: 7,00 x 1,58 x 2,16 m Ground pressure: 25 kN Ground clearance: 0,26 m Support dimension: narrow BxL 2,99 x 6,64 m Support dimension: one-sided BxL 4,35 x 6,64 m Support dimension: on both sides BxL 5,50 x 5,80 m Drive type: 230V/Diesel Empty weight: 3.880 kg Mileage: 18.947 First registration: 23.12.2013 Special features: Drive system, white rubber track, rotatable work basket. Price: 9172 Fuso single NP 15.900,- € Preis: 7818 Crawler single NP 36.900,- € Price: 9172 Fuso + 7818 Raupe Teupen together NP 49.500,- € Location: 41468 Neuss immediately available

Year of construction: 2019, condition: good (used), Pallet wrapper, – used –: Price ex works: €1,950 (net), including loading! Manufacturer: Robopac Model: Ecoplat Plus Base Type: Rotary Table Serial number: 30188020 Year of manufacture: 2019 Turntable diameter: approx. Weight: approx. 345 kg 230 V, 50 Hz, 8.5 A, 1.2 kW Manufacturer data: Length (mm) 2490 mm Width (mm) 1640 mm Height (mm) 2610 mm Film width max. (mm) 500 mm Film thickness min. (µm) 17 µm Film thickness max. (µm) 35 µm Film core diameter max. Ø (mm) 76 Ø mm Film roll diameter Ø (mm) 300 Ø mm Film stretching: Manual Film pre-stretch min. (%) 0 % Film pre-stretch max. (%) 0 % Film roll weight (kg) 20 kg Film carriage type FRD Film carriage speed max. (m/min) 4 m/min Hsdpfx Aszpf Rdsdzer Processable product length max. (mm) 1200 mm Processable product width max. (mm) 800 mm Processable product height min. (mm) 400 mm Processable product height max. (mm) 2200 mm Pallet processing capacity (pallets/h) 30 pallets/hr Rotation speed min. (rpm) 4 rpm Rotation speed max. (rpm) 10 rpm Condition: good Available: immediately Location: Erfurt area, later in Frankenberg warehouse

Condition: good (used), Year of construction: 2012, Approx. 92 bays of Hofe shelving, with shelves 1.30m wide, 0.50m deep, and a frame height of 2.50m – used: Price ex works: €7,000 (net), disassembled, packed, and loaded. Manufacturer: Hofe Type: Orion Plus Year of manufacture: 2012 / 2013 Approx. 5 shelves per bay Dimensions per shelf: approx. 1.30m x 50cm Approx. frame height: 2.50m Load capacity per shelf: 185kg Bay load capacity: 1,000kg (some nameplates indicate a load capacity of 200kg, which is due to the load capacity of the platform on which the shelving is placed; the shelving itself can support 1,000kg). Condition: good Hsdpfx Adezpf E Iezor Available: from approx. August 2026, or by arrangement Location: Erfurt area

Condition: good (used), Year of construction: 2012, Approx. 1,377 storage rack sections, Hofe, shelf units, 1.30m width, 0.60m depth, 2.50m frame height – used: Price ex warehouse (net), disassembled, packaged, and loaded. Per base section (with 2 frames and 5 shelves): €89.00 Per extension section (1 frame and 5 shelves): Up to 20 extension sections: €75.00 Hjdpfx Adszpf Ezjzjr From 21 extension sections: €69.00 From 50 extension sections: €65.00 From 100 extension sections: €62.50 From 500 extension sections: €59.00 For complete purchase: €55.00 Manufacturer: Hofe Type: Orion Plus, HZG25613XL Year of manufacture: 2012 / 2013 Approx. 5 shelves per section Dimensions per shelf: approx. 1.30m x 60cm Frame height approx.: 2.50m Load capacity per shelf: 190kg Section load: 1,000kg (some nameplates state 200kg, which is due to the load capacity of the platform on which the racks are placed; the racks can hold 1,000kg). Condition: good Available: from approx. August 2026, or by arrangement Location: Erfurt area

Condition: good (used), Year of construction: 2012, Approx. 36 bays of Hofe shelving systems, shelving units 1.30m wide, 0.60m deep, frame height 3m - used -: Price ex-works: €3,500 (net), disassembled, packaged, and loaded. Manufacturer: Hofe Type: Orion Plus Year of manufacture: 2012 / 2013 Approx. 6 shelves per bay Dimensions per shelf: approx. 1.30m x 60cm Frame height approx.: 2.50m Hedpfx Aozpf Eusdzsr Load capacity per shelf: 190kg Bay load: 1,700kg Condition: good Available: from approx. August 2026, or by arrangement Location: Erfurt area

Condition: good (used), Year of construction: 2012, Approx. 168 bays of Hofe shelving units, shelves 1.30m wide, 0.80m deep, frame height 2.50m - used: Price ex works, (net), disassembled, packaged and loaded. Per basic bay (with 2 frames and 5 shelves): €99.00 Per add-on bay (1 frame and 5 shelves): Up to 20 add-on bays: €79.00 From 21 add-on bays: €75.00 Hjdpfxezpf Ens Adzjr From 50 add-on bays: €69.00 For complete purchase: €59.00 Manufacturer: Hofe Type: Orion Plus Year of manufacture: 2012 / 2013 Approx. 5 shelves per bay Dimensions per shelf: approx. 1.30m x 80cm Frame height approx.: 2.50m Load capacity per shelf: 190kg Bay load: 1,000kg (some nameplates indicate 200kg, which is due to the load capacity of the platform on which the shelving units stand; the shelving units can support 1,000kg). Condition: good Available: from approx. August 2026, or by arrangement Location: Erfurt area Photos show a shelving unit with a depth of 60cm!

Condition: good (used), Year of construction: 2012, Approx. 15 sections of Hofe shelving units, shelving bays 1.30m wide, 0.80m deep, frame height 2m - used: Price ex-yard: €1,335.00 (net), disassembled, packed, and loaded. Manufacturer: Hofe Type: Orion Plus Year of manufacture: 2012 / 2013 Approx. 5 shelves per section Dimensions per shelf: approx. 1.30m x 80cm Frame height approx.: 2m Hjdpfx Adszpf Ehozjr Load capacity per shelf: 190kg Section load capacity: 1,000kg (some nameplates state 200kg, which is due to the load capacity of the platform where the shelving units are placed; the shelving units can hold 1,000kg). Condition: good Available: from approx. August 2026, or upon agreement Location: Erfurt area Photos show a shelving unit 60cm deep!

Condition: ready for operation (used), Year of construction: 2000, Available immediately from our location: CNC bed milling machine MTE Type: Kompakt Plus Hedpfx Aeznk Hbjdzsr Year of manufacture: 2000 Heidenhain TNC 410 control Table: 2200 x 750 mm Travel ranges X/Y/Z: 2000/800/800 mm Table load: 4 tons Tool holder: SK 50 Hydraulic tool clamping Spindle speeds: 40 – 2500 rpm Spindle power: 15 kW Total power consumption: 30 kW Coolant system Weight: 12 tons Price: Euro 10,000.00 plus VAT, ex works.

Condition: used, Year of construction: 2019, operating hours: 5,532 h, Equipment: ABS, all wheel drive, soot filter, Finished SD2500WS PLUS T4F* weather protection canopy * Air conditioning * Seat heating * Auxiliary heater * Leveling system/cross-slope control * Automatic centralized lubrication system for paver and/or screed * Infinitely variable hydrostatic drive * Front axle is a tandem swing axle * Diesel engine Cummins QSB 6.7 - EUIV(T4f) * All-wheel drive (2 x rear wheels + 4 x front wheels) * Pave Manager 2.0 Advanced * PLC electrical system (CAN bus), ECO mode, 24 V electrical system * Wheel track stone deflector * Mixing material hopper with individual control * Hydraulic front hopper * Support rollers with shock absorption * Reversible slat conveyor with double bars and individual control of conveyor belt halves * Automatic shutdown via mechanical paddles * Hydraulic screw conveyor with height scale * Two reversible screw halves (380 mm) * Ultrasonic sensors in the screw conveyor * Hydraulic screed locking * Side-mounted operator station with weather protection canopy * Variable control panel with push buttons and 7" multifunction display * Two heated Grammer comfort seats * Four LED headlights (2 x front + 2 x rear) * Dynalink Advanced - Telematics system * Hydraulic system for Pave Manager Adv. * SD2500WS THERMO with LightAssist (Paver) ----Vario screed V 5100 TV PM+* Vario screed with gas heating * Basic width 2.55 m, hydraulically extendable to 5.1 m * Compaction system: tamper and vibration * Bottom plate Hardox 500 * Hydraulic adjustment of roof profiles * Two external controls incl. leveling electronics * Leveling system Mobamatic 2+1 * FRONT WHEEL DRIVE CAN BE ACTIVATED FOR WORK ----Additional equipment and accessories* Screw 380 mm 4.42 m * Connection kit V5100/6000 Hedoy T Ukdjpfx Adzer * Rotating beacon * Fire extinguisher * First aid kit * Smoke extraction system * RESTRICTED SD2500WS THERMO * Hydraulic system for Pave Manager Adv. * LightAssist (Paver) * Lighting for screw conveyor * LED headlights screed left + right * 12V socket * TEMPERATURE MEASUREMENT SCREW CONVEYOR * Spray system 25L with hose * High-performance front-wheel drive * Tool set * SetAssist (Transport position) * TRUCKASSIST ADVANCED * Thermomaterial hopper * Folding material guide * Weather protection house * Hydraulic oil drain hose * STVZO - Lift axle * Infrared temperature measurement preparation * Operating manual + parts list (USB) * Operating manual * Parts list * Set of drawings A3 * Leveling system Mobamatic 2+1 * Vario screed V 5100 TV PM+ * Side guards OBT approved (G) PM * Spirit level screed * Holder for cross-slope Moba * Holder for height sensor MobaGrade 1x * Screed width measurement * LightAssist (Screed) * DYNAPLUS12 ----Vehicle number 12111 Errors and prior sale excepted.

Condition: used, Year of construction: 2016, - Brand: Niftylift - Type : 170 HDET - Year of construction: 2016 - Hours: No hour counter - Weight : 2164 kg. Hsdpfx Adjzmu Iyezjr - Working height: 17 meters - Lateral reach: 8.7 meters - Bi energy - Battery 24 Volt - Diesel / Kubota - Wheel Drive / Movers - New safety inspection possible - Aerial work platform book available - CE document available - Video on our website - Trade-in and transport possible * Brand: Niftylift * Hours: No hours counter * Working height: 17 meters * Lateral reach: 8.7 meters Aerial work platform book: Yes CE document: Yes *Type: 170 HDET * Construction year: 2016 Maintenance history: Yes * Weight: 2164 kg. Video on website: Yes

Condition: excellent (used), functionality: fully functional, power: 63 kW (85.66 HP), fuel type: diesel, overall weight: 8,835 kg, Year of construction: 2018, operating hours: 3,749 h, Kubota KX 080-4 Eco e Plus/SW/Variable boom/Swing arm • Manufacturer: Kubota • Model: KX 080-4 • Year of manufacture: 2018 • Operating hours: 3749 hours • Power: 46.5 Kw / 63 hp • Engine: • Travel speed: 2.7-4.8 km/h • Hydraulic quick coupler MS08 • Swing arm • Swivel bucket 150 cm • Ditch bucket 30 cm • Digging depth: 4.60 meters • Bucket arm length: 2.10 meters • Hydraulic system for hammer, grapple, and shear • Transport length: 6.45 m • Transport width: 2.20 m • Transport height: 2.54 m • High/low speed • Engine: Kubota 4-cylinder diesel • Air conditioning • Dozer blade • Overload warning system Hodsznxd Ujpfx Adzor • Total weight: 8835 kg • German machine • Immediately ready for use • This offer is non-binding and subject to change. - Subject to prior sale, - Errors and/or typos not excluded. - Sale subject to our general terms and conditions.

Condition: excellent (used), Year of construction: 2020, operating hours: 12,436 h, functionality: fully functional, machine/vehicle number: 254633, clamping force: 500 kN, screw diameter: 30 mm, We offer this very well-maintained Arburg ALLROUNDER 320 C 500 - 170 machine, manufactured in 2020, including an integral picker. Hsdpozmvi Ejfx Adzsr - Golden Edition model with SELOGICA direct control - Clamping plate set with central injection position and centering diameter of 125 mm - Plasticizing cylinder set 30 mm (without nozzle) - Open nozzle 30 mm with internal thread M 24 x 1.5 - Granulate container, stainless steel, 50 l The machine is in very good condition and is being sold from current production. Loading and transport are not included in the price and are the responsibility of the buyer. Collection is possible from September 2026. Machine location: 47574 Goch If you have any questions or require further information, please send us a message or call us.

Condition: new, maximum load weight: 36,500 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website: -ge.de. The following is an excerpt from the equipment list. Complete equipment list available upon request. GOOSENECK: * Gooseneck in SNT design to optimize the loading area length, approximately 3,700 mm long, with a rear slope of approximately 1,000 mm x 6° * For semi-trailer tractors: 4 x 2 and 6 x 2 * ASPÖCK-UNIBOX * Grated steel flooring with 5 mm sheet metal reinforcement on the gooseneck and the rear slope * 2-inch kingpin * Guide plate on the gooseneck for the fifth wheel, approximately 500 mm wide * Round NATO socket on the connection bar at the front (Maeler & Kaege VG 96 917) * 1 pair of plug-in aluminum side panels on the gooseneck, approximately 400 mm high, with an anodized finish * 1 LED work light each on the left and right sides at the top of the front wall, operated via an on/off switch (operating the work lights from the semi-trailer tractor is not possible in this case) LOADING AREA: * Loading area, approximately 9,600 mm long, with a rear slope of approximately 900 mm x 6° * Loading area behind the gooseneck can be hydraulically raised and lowered, approximately 3,000 mm long, with a load capacity of up to approximately 9,000 kg * Continuous grated steel flooring with approximately 5 mm sheet metal backing as additional reinforcement on the lifting platform and the loading area, designed for point loads TIRES: * 235/75 R 17.5 3PMSF, twin tires. Brand of our choice * TPMS tire pressure monitoring system according to ECE R 141 AXLES: * BPW axles and suspension, 1st and 2nd axles fixed, 3rd axle with trailing steering * 3rd axle with electro-magnetic reverse locking function, activated via reverse gear and manually * 1st axle with starting assist * Technical axle load: 12,000 kg each * Air suspension with lifting and lowering valve HYDRAULIC LOADING RAMPS: * 1 pair of two-piece AXS steel ramps with grated steel flooring, approximately 4,920 mm long and approximately 900 mm wide * Hydraulically folding ramp tips * Ramps can be individually hydraulically moved outwards by approximately 235 mm and inwards by approximately 365 mm * Flashing lights on the outer sides of the ramp tips, with a switch next to the ramp operation controls Hodpoy Auhhsfx Adzsr * Ramp locking in the driving position by means of a quick-release mechanism * Painted sandblasted coating on the outer frame of the ramp and on the ramp tip * Mechanical supports in drop-pipe design on the sides of the ramps for support when connecting to loading docks * Operating valves for the hydraulic ramps on the right side of the vehicle BRAKE SYSTEM: * WABCO EBS-E brake system according to EU regulations SURFACE TREATMENT: * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) to ensure the best corrosion protection PAINTING: * Trailer: Carmine Red (RAL 3002) * Rims: Silver Gray * Side panels: Aluminum, natural finish * Wheel hubs: According to axle manufacturer * Lamp housing: Pure White (RAL 9010) EQUIPMENT: * Steel front wall, plug-in, approximately 1,600 mm high, including a connection bar for supply lines to the semi-trailer tractor, mounted approximately 1,000 mm from the bottom edge of the outer frame profile * Attachment option for lashing chains on the inside left and right sides of the front wall, including aluminum trays underneath on the left and right sides for storing chains or tension straps * Appro

Condition: used, Year of construction: 2017, functionality: fully functional, Graule ZS 170 Hodpszm R U Njfx Adzsr - digital length stop - digital angle display - roller conveyor - dust extraction

Condition: used, mileage: 14,700 km, power: 125 kW (169.95 HP), first registration: 06/1970, fuel type: diesel, empty load weight: 7,100 kg, maximum load weight: 4,400 kg, overall weight: 11,500 kg, tire size: 8.25-20 PR 14, axle configuration: 4x4, wheelbase: 3,750 mm, next inspection (TÜV): 10/2026, brakes: engine braking, color: red, driver cabin: other, gearing type: mechanical, suspension: steel, number of seats: 9, Year of construction: 1970, front tire size: 8.25-20 PR 14, rear tire size: 8.25-20 PR 14, Equipment: all wheel drive, Vehicle location: Bovenden Hsdpfxsxxmqqs Adzjr Wheelbase: 3,750 mm Body: 1,600 L water tank, Klöckner H-Deutz LF 16 F Magirus 170 D 11FA Year of manufacture: 1970 Pump capacity: 1,600 L/min Tank capacity: L Crew: 9 personnel including driver Brake type: Air/hydraulic, engine brake The vehicle was in use as a company/plant fire engine from 1997 to 2025. ACCESSORY SPECIFICATIONS WITHOUT GUARANTEE, subject to change, prior sale and errors!

Condition: used, mileage: 30,000 km, power: 129 kW (175.39 HP), first registration: 06/1981, fuel type: diesel, empty load weight: 6,965 kg, maximum load weight: 4,535 kg, overall weight: 11,500 kg, tire size: 8,25 R 20 14PR, axle configuration: 4x4, color: red, driver cabin: other, gearing type: mechanical, suspension: steel, total length: 2,470 mm, total width: 3,080 mm, Equipment: all wheel drive, differential lock, fog lights, trailer coupling, Vehicle location: Bovenden, Doka, differential lock, fog lights, rotating beacon, leaf suspension, AHK light Double cab, box body with roller shutters, front pump, trailer coupling, with parts of the fire fighting equipment, top speed 92 Km/h ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - . Hjdpjvhhp Rofx Adzer

Condition: ready for operation (used), Number of spindles 6 St. Working width 230 mm Working height 120 mm Length of the planing table 2500 mm Feed motor 3 kW Feed speed 5-24 m/min. Dimensions (L/W/H) 3900 x 2200 x 2000 mm weight of the machine ca. 2500 kg Weinig Profimat 23 Four-Sided Planer – Window Version (With glazing bead separation feature, or usable as a grooving spindle) ATS Control and Program Control ----- Technical Specifications Summary (Please inquire regarding any additional accessories that may be included) ----- General ----- > Working width: 230 mm > Working height: 120 mm > Number of spindles: 6 > Infeed table length: 2500 mm > Feed motor: 3 kW > Feed speed: 5–24 m/min > Total power requirement: 27 kW > Dimensions: 3900 x 2200 x 2000 mm > Machine weight (approx.): 2500 kg Spindle Arrangement ----- > Spindle 1: Bottom > Spindle 2: Right (pneumatically actuated: up/down) > Spindle 3: Left > Spindle 4: Top > Spindle 5: Bottom > Spindle 6: Glazing bead saw (pneumatically actuated: up/down) Hsdpfsy Spvrox Adzor Spindle Specifications ----- > Spindle 1: 4 kW, 6000 rpm, 40 mm diameter > Spindle 2: 7.5 kW, 6000 rpm, 40 mm diameter > Spindle 3: 6000 rpm, 40 mm diameter > Spindle 4: 5.5 kW, 6000 rpm, 40 mm diameter > Spindle 5: 4 kW, 6000 rpm, 40 mm diameter > Spindle 6: Glazing bead saw (2.2 kW, 6000 rpm, 40 mm diameter) Additional Features ----- > Glazing bead separation feature (or usable as a grooving unit) > ATS Control (automatic) 2-axis positioning for width and height (left and top spindles) with program memory (99 programs) > Machine operation: Window package Joint control of the right spindle and the glazing bead outfeed via manual selector switch on the control panel > Spindles with mechanical digital displays ----- Price of the above-mentioned machine upon request! ----- Option: Used planer heads and for divide out glass bead ----- (Technical specifications according to manufacturer – subject to change/without guarantee!)

Condition: used, Number of boring spindles 5 St. Working width 230 mm Working height 120 mm Hodpfsx Ecguex Adzjr

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, For sale: Well-maintained EMCO Hyperturn 665 MC Plus with IEMCA Master 880MP-E bar loader, chip conveyor, and high-pressure coolant pumps! Machine was exclusively used for machining brass parts! CNC Turning and Milling Center | EMCO Hyperturn 665 MC Plus with main and sub-spindle, C and Y axes, dual turrets each with 12 driven tool stations! Technical Data: Swing diameter over bed: 600 mm Swing diameter over cross slide: 500 mm Control: Siemens Sinumerik 840D Max. turning diameter: 430 mm Max. turning length: 744 mm Max. bar capacity: 65 mm Travel - X: 270 mm Travel - Z: 750 mm Travel - X2: 205 mm Travel - Z2: 750 mm Hodpfexzq Ncox Adzer Travel - Y: 100 (+/- 50) mm Main spindle speed: 0 - 5,000 rpm Sub-spindle speed: 0 - 7,000 rpm Tool turret: 2x 12 positions, all driven! Tool holder: VDI 30 Upper turret: X, Z, Y axes Lower turret: X, Z axes Sub-spindle traverse (left/right): Z3 axis C11 spindle: 65 mm diameter (hollow chuck cylinder) C12 spindle: 45 mm diameter (solid chuck cylinder) with part ejector Tool turret type: Sauter 2x 14 bar high-pressure pumps Accessories: Complete tooling cabinet with driven and static toolholders as well as carbide inserts and tool holders Collet chucks for main and sub-spindle Full documentation etc. Machine available immediately! Ready for operation! Loading will be handled by us! Transport can be organized upon request!

Condition: like new (used), Year of construction: 2023, INJECTION MOLDING MACHINE Arburg ALLROUNDER 1300 T 1000 – 170 Year of manufacture: 2023 Technical Specifications Clamping Unit: Clamping force: 1000 kN – ensures high process stability Rotary table diameter: 1300 mm – optimizes production cycle Usable mold mounting area: 800 × 590 mm Minimum mold height: 300 mm Maximum daylight between platens: 585 mm Injection Unit (3 interchangeable cylinders): Cylinder Ø 30 mm: 83 cm³ at 2200 bar Cylinder Ø 40 mm: 140 cm³ at 1250 bar Cylinder Ø 20 mm: 36 cm³ at 2500 bar Additional equipment: - 2 hydraulic cores – for operating complex molds - 2 pneumatic valves – for additional mold functionalities - GK control – enables direct control of 3 heating zones from the machine - SELOGICA DIRECT control system – precise process control, capability for custom sequence programming Year of manufacture: 08/2023 Pump operating hours: 1062 h Detailed Description The machine is fitted with a hydraulic system featuring two energy-efficient variable displacement pumps and a servo valve for precise pressure and movement control. The hydraulic power unit is mounted outside the injection molding machine’s frame, significantly reducing operational noise. Thanks to precision filters and low oil volume, the oil change interval is extended to 20,000 hours. T2 servo-regulation technology includes: - Two adjustable variable delivery pumps - Programmable, adjustable, and stabilized clamping force - Programmable and manually adjustable nozzle contact force - Capability for simultaneous (parallel) movements (nozzle, ejector, cores) The machine is also equipped with: Hsdpfxsxzklqs Adzsr - Additional continuous oil filtration and cooling system (bypass circuit) - AES system – automatic optimization of main drive operation, reducing energy consumption by smoothly adjusting pump speed according to machine load (for 15–75 kW motors, 380–480V, 50–60 Hz). Required option: 525/02 – adjustable machine cooling circuits Tool plates are equipped with a central injection position and a Ø 125 mm centering hole.