Used Teka Scraper for sale (719)

Condition: reconditioned (used), Technical data feed hopper with hydraulic moving floor and bag opener for recyclables from yellow bags and residual waste: Manufacturer BRT HARTNER GmbH Type HP5-3035 Year of construction 2015 Hopper volume 30 m³ Drive line 17.5 kW Dimensions in current state 13,200 x 3,050 x 4,350 mm (l x w x h) Condition of the machine: The feed hopper with bag opener was used at a large recycling plant, where recyclable materials from yellow bags or commercial waste were tipped into the hopper using wheel loaders, the bags were opened using the bag opener, and the recyclable materials were transported to a sorting plant or the commercial waste was transported in measured quantities for further processing. The system functioned flawlessly until it was dismantled and replaced with a larger system with higher throughput capacity. The machine was dismantled into individual parts in our workshop, partially overhauled, reassembled, and tested during operation. The following overhaul work was carried out and the following spare parts were replaced: Dismantling of the feed hopper and bag opener into individual parts. Cleaning, partial sandblasting, priming and painting of the steel parts. Various wear and cover plates were newly manufactured and installed. Cutting off the worn ends (approx. 40cm) of the push floor pipes. Welding on the new pipes and smoothing the push floor pipes. Replacement of all plastic sliding plates for the hydraulic push floor. Removal of the hydraulic unit from the push floor, emptying of the hydraulic oil tank, replacement of the oil filters, refilling with new hydraulic oil. Replacement of the three hydraulic blocks, all valves, the oil sight glass and all hydraulic hoses from the hydraulic unit. The seal kit and hydraulic hoses were replaced on all three hydraulic cylinders of the push floor. All six limit switches (proximity sensors) on the push floor were replaced. The conveyor chains on the left and right of the scraper conveyor were replaced. Seven carrier bars on the scraper conveyor were replaced. The drive motor for the ripper blades was replaced. All nine pneumatic cylinders for the pressure pipes were replaced. All pneumatic lines and connections were replaced. All of the plastic sliding plates for the hydraulic operation of the bag opener were replaced. The bag opener can be moved vertically so that the system can also be used for commercial waste or residual waste without the bag opener. The side impact protection plates on both sides were replaced. Various wear parts of the bag opener have been replaced. The entire system has been rewired and reconnected. The system control in the control cabinet has been retrofitted by the manufacturer BRT Hartner to a self-sufficient individual control system and the standard programme has been reloaded into the control system. The system has been commissioned and tested by the manufacturer BRT Hartner, see the function video. Comments: Dsdpfx Adjyizxrs Nout The documentation (Manual, CE-declaration, electr./hydr.-drawings), are available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: reconditioned (used), Year of construction: 2005, operating hours: 30,408 h, functionality: fully functional, pressing force: 50 t, filling opening width: 1,100 mm, filling opening length: 1,250 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 550 kg, overall weight: 16,000 kg, oil tank capacity: 600 l, year of last overhaul: 2024, Technical data baler: Manufacturer Presona AB Type LP 50 EH1 Year of construction 2005 Operating hours 30,408 hours, as of April Number of pressed bales 198,059 as of April Pressing force main press 50 tonnes Specific pressing force 63 N/cm² Theoretical throughput capacity 530 m³/hour Throughput capacity under operating conditions 260 m³/hour Dimensions of feed chute 1,250 x 1,100 mm Bale chamber volume 2.2 m³ Bale dimensions 1,100 x 720 mm, variable length Drive power 22 kW Tying 5-fold vertical, fully automatic Throughput rates with a bulk density of 30 kg/cbm 6 up to 7 tonnes/hour Bulk weight of 50 kg/cbm 7 up to 9 tonnes/hour Bulk weight of 100 kg/cbm 11 up to 14 tonnes/hour Bale density (paper/newspapers) 400 to 550 kg/m³ Hydraulic oil tank capacity 600 litres PLC control Telemecanique TSX Micro Schneider Magelis control panel Effective transport dimensions excl. baler 8,125 x 2,300 x 3,000 mm (L x W x H) Transport weight press approx. 16 tonnes Condition of the baler: The machine was partial overhauled in our workshop and general maintenance work was carried out. After completion of the overhaul work, the press was tested during operation and is available for sale at short notice. The following overhaul work was carried out: General work: Machine cleaned, derusted, primed, partially painted Wire entry marks in the press channel feed-throughs welded shut and smoothed Hydraulic unit: Hydraulic oil tank emptied, tank cleaned, new oil filled Oil filter and air filter replaced Leaky oil sight glass on hydraulic oil tank replaced All hydraulic hoses replaced Electrics: English language installed in the programme menu Two key switches in the control panel replaced Control cabinet replaced Signal lamp on the control cabinet replaced Flaps end switch replaced Electrical system of the turbulator replaced, connected and tested Press ram: Dsdeu Thhrjpfx Ad Nsut All four rollers removed from the press ram and replaced Main hydraulic cylinder dismantled, disassembled and partially overhauled, cylinder tube honed, complete seal set replaced, leak test performed All plastic wear pads on the press ram replaced Pre-press: Both bearings on the pre-press shaft replaced. Both hydraulic cylinders dismantled, disassembled and partially overhauled, both cylinder tubes honed, complete seal sets replaced, leak test performed. Scraper flap on the pre-press replaced. Binding system: Two complete needles with wire deflection rollers replaced Needles adjusted and set All wire deflection rollers in the needle heads replaced Drill fingers replaced Two drill shafts replaced All 8 wear plates on the Drillomat, under the drill fingers, replaced Scope of delivery: Only the baler will be sold. The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, Year: N/A Condition: good Configuration: - High-lift forklift - Automatic adjustment of folding pockets - Vacuum feeding of sheets + leveling ball guide - Programmable control panel - Dose counter - Tine scraper Technical specification: - Maximum paper size: 450 × 650 mm - Minimal paper size: 90 × 150 mm - Number of punch dimples pockets: 2 - Minimum warehouse length: 20 mm - Speed:up to 30,000 arches/hour - Minimum weight: 50 g/m² - Maximum weight capacity: 240 g/m² Duodpfxoy I Tkxo Ad Net

Condition: used, Year of construction: 1998, Used machine Year of manufacture: 1998 Features and technical data: At 5,500 mm in length, the Quadromat is the shortest edge banding machine that enables complete processing of edge materials with an integrated workpiece return system. Not only are the longitudinal edges trimmed within the machine, but the end edges are also copied, thus completing the processing cycle. The finished workpiece is returned to the operator, eliminating the need for manual reworking. - With PLC control system supporting up to 20 processing programs Workpiece dimensions: - Minimum width: 60-80 mm (depending on edge material) - Minimum length: 150 mm - Workpiece thickness: 10 - 50 mm - Edging thickness: 0.4 - 12 mm - Minimum edging length: 400 mm Duedpowkba Tsfx Ad Nst Feed rate: 18 m/min Equipped with: - 2 jointing milling motors - Multi-functional milling unit (flush trimming, chamfer, radius) - Scraper - Cross-cut saw - 2 glue pots (for transparent and white glue) and 1 spare pot Compressed air connection: 7-10 bar Extraction connection: 160 mm Weight: approx. 2,400 kg Availability: short notice Location: Flörsheim

Condition: used, Year of construction: 2006, Used machine Year of manufacture: 2006 Condition: completely overhauled Equipment and technical data: - fitted with new glue application system - manually adjustable infeed fence - milling unit 1961 - edge feeder 1903 - glue application station 1906 with tracking nozzle - pressure unit 1816, pneumatic - end trimming unit 1822 - milling unit 1942 M for radius, chamfer, flush trimming - complete air nozzle - scraper unit 1929 - chip collection box - surface scraper 1964 - extraction hood set - complete safety covers - total length: 5,291 mm - workpiece thickness: min. 6 / max. 50 mm - edge band thickness depending on configuration: 0.4–5 mm - max. edge band height: 55 mm - minimum edge band strip length: 350 mm - max. edge band overhang/height per side: 3 mm - minimum workpiece width: 60 mm - minimum workpiece length: 180 mm - feed speed: 12.5 m/min - extraction: - jointing/milling unit: 900 m³/h - milling unit: 280 m³/h - scraper unit: 280 m³/h - static vacuum: - jointing/milling unit: 1,490 Pa - milling unit: 1,650 Pa - minimum air velocity: 20 m/sec - jointing/milling unit connection: 70 mm - scraper unit connection: 70 mm Duodpjwka H Sefx Ad Not - compressed air: 6 bar Availability: short notice Location: Röllbach

Condition: not inspected (used), Year of construction: 2006, Connected load 380V 22A Edgecontrol operating panel 1856 Spray device 1961 Pre-milling unit 1901 Edge feeder 1905 Glue station 1926 Pneumatic pressure unit 1819 End trimming unit 1962 Milling unit 1966 Milling unit 1965 Scraper blade rounding Duodpfx Adoy Ici Ro Njt 1983 Contour milling unit 1964 Flat scraper blade 1944 Polishing unit Extraction nozzles 1x120/1x160/1x100mm

Condition: new, Clean air extraction / dust extractor Dust-tested to H3, residual dust content less than 0.1 mg/m³ Suitable for extracting and separating dry wood and plastic chips High extraction performance with low space requirement Maximum performance in this class Very quiet Designed for commercial use Robust and compact housing made of galvanized sheet steel Duodpfjr A Eq Rsx Ad Nst Extraction nozzle can be easily converted from left to right for flexible use Large inspection openings Large, mobile chip container with clamping bracket and chip collection bag Dust extractor already fully assembled on delivery, so can be used quickly All models are mobile Polyester fleece filter material, aluminized, therefore with long service life Antistatic filter tested and approved to category M-BIA as standard The fan is connected downstream of the filter Efficiency class extraction motor IE3 Nominal volume flow 1448 m³/h Nominal negative pressure 2242 Pa Power drive motor 2.2 kW, 400 V, 50 Hz Chip collection volume 2 x 165 l Nominal width of external suction connection inlet 160 mm Filter area 9.21 m² Residual dust content < 0.1 mg/m³ Sound pressure level max. 73 dB(A) L x W x H approx. = 1618 x 830 x 1653 mm Weight approx. 268 kg VERSION PM Automatic filter cleaning with pneumatic system that moves a scraper frame

Condition: new, ALTENDORF Model F 2 Offer type: New machine, SALE ONLY IN AUSTRIA! Immediately available new machine at a special price with full manufacturer's warranty. The 3.3 m long F 2 is not only cost-effective and space-saving. It is also equipped with everything you need to process perfect edges from the start: diamond-tipped jointing cutters ensure workpieces are excellently prepared for edge banding. The equipment includes a jointing unit (up to 2 mm cutting depth), top-mounted quick-heating glue pot, cross-cut saw, and combination milling cutter. Optionally, the F 2 can also be fitted with a surface scraper. Max. edge thickness: 3 mm Duedpfxol D Rp Es Ad Nst Max. workpiece thickness: 50 mm Ready for operation in 3.5 min Feed rate approx. 10 m/min Equipment: F2 next edge banding machine With PLC control (incl. touchscreen) Hot-melt adhesive application to the workpiece for edging material up to 3 mm Jointing cutter (incl. diamond tool) up to 2 mm cutting depth Maintenance-free glue pot with quick-change option incl. glue discharge device HF cross-cut saw station (approx. 12,000 rpm) HF milling station (approx. 12,000 rpm) with separate pneumatic milling adjustment and interchangeable cutter head (combination version) Robust chain drive Ball-bearing double pressure roller Viewing window from the rear of the machine Extendable workpiece support Including special equipment: F2/12 surface scraper (incl. pneumatic lift) F2/30 pneumatic 3-point adjustment (for radius, chamfer, or flush trimming) F2/27 nesting for milling stations

Condition: excellent (used), Year of construction: 2007, Edge thickness 0.2 - 12 mm Workpiece thickness 8 - 52 mm Workpiece width min. 70 mm Workpiece length min. 150 mm Automatic edge magazine milling unit 2 x 1.5 kW, application-controlled Cut-off unit 2 x 0.3 kW Flush trimming unit 2 x 0.7 kW, scanning on one side Fine trimming unit 2 x 0.35 kW, tiltable 15/ 30/ 45 degrees Fine trimming unit 2 x 0.3 kW, R=2, scanning on both sides Corner copying unit 2 x 0.3 kW Scraper unit, autom. in/ out Flat scraper unit Buffing unit 2 x 0.2 kW, oscillating 5 x spray device (2 x release agent, 1 x lubricant, 2 x cleaning agent) Color touch screen control OTT C3 Motorized height adjustment Feed 10 - 14 m/min COMBI MELT gluing part for EVA/ PUR, volume 1.5 l CE mark Djdpfxjlc Ewie Ad Nsut Total connection 12.6 kW Dimensions L x W x H approx. = 6120 x 840 x 1500 mm Weight approx. 2,900 kg

Condition: ready for operation (used), Year of construction: 2022, operating hours: 1,316 h, travel distance X-axis: 550 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 510 mm, controller manufacturer: SIEMENS, controller model: Sinumerik 828D, total height: 2,840 mm, table load: 600 kg, overall weight: 5,600 kg, spindle speed (max.): 12,000 rpm, tool weight: 8,000 g, number of axes: 3, This 3-axis DMG MORI M1 PRO was manufactured in 2022. It features a robust inline spindle with a speed range of 20-12000 rpm and a 24-position automatic tool changer. The worktable supports up to 600 kg with dimensions of 850 × 650 mm. Additional highlights include a Renishaw PP40 probe, 20 bar coolant system, and LED lighting. Ideal for precision machining tasks. Contact us for more information about this machine. Additional equipment • Job Shop package • Renishaw PP40 wireless workpiece probe • TS27R tool measurement probe • Scraper-type chip conveyor • Coolant tank capacity: 200 L (left side) • Coolant pump: 20 bar internal through-spindle coolant • Machine enclosure roof • LED work area lighting Machine Benefits • Table size: 850 × 650 mm • 24-position automatic tool changer with double gripper • Voltage: 3 × 400V Extra Information • The machine is in fully functional condition • Tested and confirmed by DMG service report, including accuracy measurements Dsdpfsx D Nigsx Ad Neut • Complete documentation is available • Currently disconnected from power Dimensions Machine Depth 3065 mm Technical Specification Taper Size SK 40 Through-spindle Coolant Yes

Year of construction: 2016, condition: used, Manufacturer : IMMEQUIP Engineering Model : CEMH 360 Year: 2016 Width: 36 cm Type : Cutter / Laminator Structure & design: All-stainless steel 304L mechanically welded frame Fitted with 4 pivoting wheels with brakes Conveyor: Entry conveyor belt – Motor: 0.25 kW – three-phase 400V – Product guidance via stainless steel comb Conveyor: Outfeed belt – Motor: 0.37 kW – three-phase 400V – Integrated air blow-off ramp Dsdjy Hdqaepfx Ad Nsut Cutting unit – Cutting wheel Ø350 mm – 3 blade holders (45° and 90°) – 3 ground hardened steel blades (Z30C13 – 40/42 HRC) – Option to add more – Rotation speed: 72 rpm – Motor: 0.37 kW – three-phase 400V – Guide with stainless steel bearings – Cutting kit available: 90° and 45° Product orientation kit: 1 symmetrical set, each comprising 1 cell, 1 stop flap and 1 pneumatic cylinder Rolling function – Non-motorised stainless steel roller, Ø140 x 350 mm – Gap adjustment: manual – Adjustable anti-clogging scraper Power supply: Three-phase 400V – 50 Hz Danfoss VLT frequency converters Operator display (HMI) Full machine control Buzzer + power-on indicator light Emergency stop buttons (including 1 on the cutting unit side) Electrical documentation available

Condition: new, Year of construction: 2026, Hebrock - Altendorf Edge Bander F5 next - Brand new machine, still in original packaging with complete equipment Dodpfsy Iw Nrsx Ad Njut - With PLC control including 15" touchscreen - Edge material up to 3 mm - Whispercut jointing head including DIA tool up to 2 mm - Coated maintenance-free glue pot, PUR interchangeable tank - Includes glue drain device downwards - HF milling station with pneumatic milling adjustment - Corner rounding unit - Radius scraper - Surface scraper including pneumatic lift device - Buffing station - Combination milling head - Radius milling head R = 2 mm - Radius corner milling unit R = 2 mm - Quick-change system for corner milling unit - Additional changeover motor for corner milling unit with tooling - Radius changeover motor R = 1 mm - Ball bearings 24.1 and 24.2 mm - Multi-radius scraper R1/R2 - Underframe - Additional interchangeable glue pot including stand - Spray system for release agent PUR - Spray system for cleaning agent PUR - Spray system for edge PUR/foil - Nesting for milling head and radius scraper - Pneumatic 3-point adjustment (radius, chamfer, flush trimming) - Jointing up to 50 mm workpiece thickness - LED lighting inside - Workpiece thickness 8–50 mm - Min. workpiece length approx. 160 mm - Feed speed approx. 10 m/min - Dimensions (LxWxH): 4.40 x 1.10 x 1.55 m - Weight: gross: 990 kg; net: 930 kg - Extraction nozzle 1 x 140 mm Delivery and commissioning possible.

Condition: used, Year of construction: 1983, Manufacturer : Moritz Year : 1983 Type : Vacuum mixer Emulsifying motor: 3000 rpm – 3 kW Volume : 50L Vertical stainless steel tank: Diameter 400 mm / Depth: 450 mm Jacketed Total draining Djdpfx Adsy E T Sws Nout 2 variable-speed agitators on the lid - 2 three-bladed propellers: 0 to 200 rpm - Anchor with scrapers: 0 to 100 rpm Two-speed bottom-mounted turbo emulsifier with recirculation Built-in vacuum pump Electrical cabinet A hot water unit is available on request; this request may be subject to a separate quotation.

Condition: ready for operation (used), Year of construction: 2016, Edgebander manufactured in 2016. This HOMAG KAL 370 features a continuously adjustable feed speed of 18-20 m/min and accommodates workpiece thicknesses from 8 to 60 mm. It includes advanced gluing and trimming units, as well as a comprehensive software package for efficient operation. If you are looking to get high-quality edgebanding capabilities, consider the HOMAG KAL 370 machine we have for sale. Contact us for further details. • Feed speed: Continuously adjustable 18–20 m/min • Fixed stop side: Left • Workpiece thickness: 8–60 mm • Workpiece overhang: 30 mm • Throughput equipment: Pre-installation for Boomerang TFU140 • Feed lock: Available • Feature packages: Future-Paket 5; Foil/High-Gloss Package (bottom) • Infeed features: Sliding carriage; Workpiece alignment at infeed; Workpiece support with roller track; Infeed barrier • Workpiece transport: Transport device; Top pressure • Cleaning/Prep: Release agent spraying unit (top/bottom) • Jointing/Milling: Joint trimming unit; I-System-DIA jointing cutter set WD60; Workpiece pre-heating (up to 60 mm thickness) • Gluing: Gluing unit; Preparation for Airtec activation unit; Adhesive application system; Application units QA60 and PU60; Pressure tank for PU application unit • Magazine/Pressure: Edge magazine; Pressure zone • Spraying: Lubricant spraying unit (top, bottom, side) • Trimming/Milling: Snipping unit HL81 (bevel/straight, 0.8 kW); Pneumatic adjustment for flush/overhang trimming; Pre-milling unit BF10; HM milling cutter set (straight); Form milling unit FK11 • Tooling/Changeover: I-Exchange head system (automatically adjustable/FK); I-DIA radius cutter set (for FK, R=2 mm, Z=4); Standard milling unit SF21; Multi-profile scraper MN21 (automatic); Profile knife set for MN20/21 • Additional units: Joint scraper FA20 BASIC; Automated scanning for joint FA20; Buffing unit FA06 (top/bottom); Powercontrol PC23 Powertouch • Control/Software: Software package WoodCommander; Antenna sequence control; Machine data acquisition and evaluation; Error diagnosis; Teleservicenet-soft Dedpfxjy Hrtps Ad Nsut • System/Networking: Emergency stop interlock; Network connection (Ethernet); Manual control for setup mode; Language: German • Documentation: On data carrier and paper Additional equipment • Boomerang return system TFU140/20/08-Optimat • Workpiece detection (sensor-based) • Basic outfeed return line • CE for cells (systems)

Condition: ready for operation (used), Year of construction: 2010, number of axes: 4, This 4-axis HOMAG BAZ 211/40K was manufactured in 2010. It features a vacuum clamping system with multiple configurations, a powerful vacuum pump, and a Flex5+ sawing, milling, and drilling aggregate. The machine is equipped with three tool changers and an edge banding package for enhanced processing capabilities. If you are looking to get high-quality CNC wood machining capabilities, consider the HOMAG BAZ 211/40K machine we have for sale. Contact us for further details. • Vacuum clamping system: 8x 120x50 mm (0/90°) K-Table • Rotating vacuum clamping system: 8x 125x75 mm (360°) K-Table • Vacuum pump: Reinforced 100/140 m³/h • Aggregate: Flex5+ sawing, milling, and drilling aggregate for tool changer (WZW) • Tool changers: 3x tool receivers for Flex5+ (WZW) Dodoy Hrr Eopfx Ad Njut • Edge banding package: Power EDGE 360° for BAZ 211/311 Venture • Edge processing: Workpiece edge blow-off nozzle • Milling/Scraping: Combination flush milling and scraper aggregate (WD 60 mm) • Profile blades: 2x for scraper • Radius cutter head: 2x WPL radius cutter head • Material handling: Tool transfer station for B200/300/K • Software: Upgrade to woodWOP 6.0

Condition: used, functionality: fully functional, tank capacity: 1,000 l, The Glass VSM/F 1000 is a versatile vacuum mixer that optimizes the processing of meat, fish, fine foods, fruits, and vegetables. Thanks to its vacuum technology, it not only blends but also massages products, improving their texture and quality. Indeed, this mixer is ideal for operations requiring the use of nitrogen or direct steam injection. It also features a mixing arm with a scraper and an electric tilting system, facilitating product unloading. Furthermore, its pneumatic lid ensures safe and efficient operation. Dujdpou Iafnsfx Ad Not Furthermore, the Glass VSM/F 1000 offers a large processing capacity, making it ideal for companies looking to increase productivity. Thanks to its advanced features, it guarantees homogeneous mixing and optimal food preservation. Furthermore, its ergonomic design facilitates cleaning and maintenance, reducing downtime. In short, this vacuum mixer is an essential asset for improving the quality and efficiency of production processes in the food industry. SPECIFICATIONS: Power: 5.93 kW Current: 13.74 A Voltage: 400 V; 50 Hz Volume: 1000 L Mj+KikOw

Condition: excellent (used), Model: Hebrock AKV 3006 DKF Pre-milling Station Crosscut saws Top/Bottom cutter Dedpfx Adjyx Dfbs Nsut Corner trimming Scraper Polisher

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, operating hours: 1,651 h, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, feed rate X-axis: 25 m/min, HOMAG KAL 310 + panel return system TFU 140! TECHNICAL DETAILS Profile milling unit FK11 manual Edge thickness: max. 3 mm Motors: 2 units Motor power: 0.4 kW per motor Frequency: 200 Hz Speed: 12,000 rpm Feed speed: max. 20 m/min Feed speed for continuous trimming without profile trimming: max. 30 m/min Panel length single-sided: min. 240 mm Panel length double-sided: min. 120 mm Panel thickness: 12 - 60 mm Panel spacing with PC22: min. 500 mm Minimum workpiece gap for workpiece thickness over 22 mm: min. 600 mm Duedpfxsyzxa Ej Ad Net Multi-scraper MN21 Automatic Number of profiles: max. 5 different profiles Edge thickness: max. 3 mm Panel thickness for radius R = 3 mm: min. 13 mm Panel thickness for bevel 0.5 x 45°: min. 10 mm TC knives: 2 units Bevel angle: 20° Radius: R = 1.5 / R = 2 / R = 3 / R = 5 Pre-milling unit BF10 Motors: 2 units Motor power: 0.55 kW per motor Frequency: 200 Hz Speed: 12,000 rpm Swivel range: +/- 1° TC cutter: 70 x 25 mm HSK: 25 Cutting angle: 54° Feed speed: 18-25 m/min Workpiece thickness: 8-60 mm Edging material (roll): 0.3-3 mm MACHINE DETAILS Operating hours Operating hours: 6,358 h Feed time: 1,651 h EQUIPMENT Pre-milling Automatic adjustment of the infeed fence Infeed device with 2 rollers Quickmelt application station 2-roller magazine infeed Automatic adjustment of the pressure zone HL84 end trimming unit with pneumatic adjustment BF10 flush milling unit with pneumatic adjustment FK11 profile milling unit MN21 multi-profile scraper unit for 5 different profiles Grooving unit Glue joint scraper Buffer Return system TFU140

Condition: good (used), Year of construction: 1997, functionality: fully functional, - PVC Primus, 3 mm PVC cartridge system - Gluing, flush trimming, flush milling, chamfer milling, radius milling Dujdpfx Adjwv Uq Ae Not - Scraper blade, buffing unit - Dimensions: 4700 x 1400 x 1650 mm - Weight: 1300 kg - Working dimensions: Length: 4500 mm Depth: 1020 mm Height: 1630 mm - Connection nozzle: 140 mm Ø - Workpiece width: min. 60 mm - Feed rate: 11 m/min - 6 bar - 400 Volt compressed air - Edge thickness: 8 mm for strip material, 2 mm for roll material - WITHOUT pre-milling unit - New pneumatic cylinder Shipping possible at additional cost

Condition: excellent (used), Catalogue number: 7983 TECHNICAL DATA Equipment: - Disc - Pre-milling unit Dujdpsy Id Nlofx Ad Njt - Tape feeder - Guillotine - Glue tank (granulate) - 4 pressure rollers (1 rubber, 3 metal) - End trimming unit with saw blades front/rear - 2 edge milling units, top/bottom with radius cutters - 2 scrapers for removing excess glue, radius, top/bottom - Corner rounding unit - Straight scraper, top/bottom - 2 polishers - Max feed speed: 10 m/min - Min workpiece length: 260 mm - Min workpiece width: 90 mm - Workpiece thickness: 10–60 mm - Edge banding tape thickness: 0.5–3 mm - Pull-out workpiece support from the table - Total power: 12.3 kW - Extraction nozzle diameter: 140 mm - Dimensions (LxWxH): 5000x1520x1600 mm - Weight: 1295 kg ADVANTAGES - Not repainted / original paint - Pre-milling, corner rounding - Control panel with quick selection of pre-set work programs - German made - Full technical documentation (DTR) - Machine after service (inspection date: 17.10.2025, next inspection: 17.10.2026) - Very good condition - Used edgebander Net price: 38,900 PLN Net price: 9,260 EUR (based on exchange rate 4.2 EUR) (Prices may vary depending on exchange rate fluctuations)

Condition: ready for operation (used), Year of construction: 2012, workpiece width (max.): 60 mm, product length (max.): 7,845 mm, Edgebander manufactured in 2012. This HOMAG KAL211 Edition 2264 features a working height of 950 mm and accommodates workpiece thicknesses from 8 mm to 60 mm. It includes various units such as a gluing unit, joint trimming unit, and pre-milling unit, enhancing its versatility. If you are looking to get high-quality edge banding capabilities, consider the HOMAG KAL211 Edition 2264 machine we have for sale. Contact us for further details regarding this machine. • Feed speed: 18–25 m/min • Feed speed (max with FK11 unit): 20 m/min • Working height: 950 mm • Pneumatic connection: 6 bar • Total length: 7845 mm • Workpiece width (min): • 60 mm at 12–22 mm thickness • 105 mm at 23–40 mm thickness Dodoy Hi Eiopfx Ad Nout • Workpiece thickness: 8–60 mm (extended via options • Edge material thickness: • Rolls: 0.3–3 mm • Strips: 0.4–20 mm • Electrical: • Supply voltage: 400 V / 3 Ph / 50 Hz • Total load current: 67 A • Control voltage: 24 V • Control system: powerControl PC22 (Windows XP based) • Software: woodCommander; woodScout (option); Schuler MDE Basic • Aggregates/units: • Separation agent spraying unit (top/bottom) • Joint trimming unit (2 motors, 4 kW each) • Gluing unit A20 with 2 rollers (Quickmelt system) • PU65 application unit (exchangeable, Teflon coated) • Preparation for laserTec activation unit • End trimming unit HL84 (0.8 kW) • Pre-milling unit BF10 (1.5 kW) • Multi-profile form milling unit FK11 (manual adjustment) • Profile scraper PN10 • Finish unit (glue joint scraper + buffing unit) • Cleaning agent spraying unit Additional equipment • Automation package (No. 4013): • Automatic adjustment of infeed fence and pressure zone • Electronic height adjustment for the top pressure beam

Condition: good (used), Chip conveyor, chip conveyor belt, coolant cleaning, chip disposal, scraper conveyor, scraper conveyor belt, chip chain conveyor, hinge belt conveyor, scraper belt conveyor -Manufacturer: COMAR, chip conveyor comes from a MIKRON VC 500D -Type: VC 500D -Conveyor belt width: 230 mm -Outlet height: 1100 mm Djdey Ezacopfx Ad Njut -Drive: 0.15 kW / 14 rpm (2.40 m/min) -Individual components: see photos -Dimensions: 720/2630/H1575 mm -Weight: 727 kg

Condition: used, Year of construction: 2006, functionality: fully functional, operating hours: 3,839 h, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 50 mm, edge thickness (max.): 6 mm, height adjustment type: mechanical, feed rate X-axis: 18 m/min, actuation type: pneumatic, total height: 1,500 mm, total length: 4,900 mm, total width: 1,100 mm, Equipment: CE marking, documentation/manual, We are offering this used Holz-Her 1315 edge bander, year of manufacture 2006. Type: 1315 Serial number: 4622/0-704 Factory number: 5009138 Series: KAM07V2 Year: 2006 Operating pressure: 6 bar Maximum pressure: 8 bar Holz-Her Sprint 1315 End trimming unit (one coupling has an air leak) Bonding possible with granules or cartridges 2 saws Top and bottom trimming Radius scrapers With corner rounding Flat scraper Polishing brushes Machine still in operation Available from 04/05/26 Duedpfoy El Nzsx Ad Njt Can be loaded by forklift If you have any questions or require further information, feel free to send us a message or call us.

Year of construction: 2007, operating hours: 138 h, condition: like new (used), functionality: fully functional, machine/vehicle number: 900K707385, Tablet Press PRESSIMA – as new, in ex-works condition Fully functional machine with complete documentation and software. Including multi-tip tooling set EU-D (5 × 4mm) (purchase price: €12,000, 6 months old) as well as a single-tip tooling set (5mm) EU-B. Both punch sets supplied by Ritter. Duodpfsy Hl Aqsx Ad Nst The machine is equipped with an interchangeable turret. Both B- and D-type tooling can be used, in either EU or TSM standard. Operation • Suitable for small batch production • Main compression force measurement with digital readout on the machine panel • Digital display of parameters set via handwheels • Note: No automatic control system available Technical Data • Speed: 10–75 rpm • Max main compression force: 50 kN • Pre-compression force: 10 kN • Turret diameter: Ø 180 mm • Two-wheel feeder, variable speed • Drive motor: frequency controlled, 1.5 kW • Power supply: 400–480 V, 50/60 Hz • Total power consumption: 1.5 kW • Machine housing and press area: stainless steel • Press area unpainted, easy access, hard-nickel-plated surfaces • Central extraction port • Central manual lubrication pump for punches • Automatic lubrication pump for punches and guideways • Feeder motor integrated in the headpiece Mechanics • Handwheels for tablet thickness, main pressure, pre-compression, and fill • Rotary flap between fill tube and feeder • Solid pre-compression and main compression stations • Scrapers on upper and lower punches • Magnetic brakes on lower punches • 12 mm fill shoe as standard • Lower punch is lowered after dosing • Lower guideway and ejection rail easily removable • Machine status display on control panel Measuring and Analysis System • MS2300 for recording and analysis of up to 16 channels • Measurement/analysis of: o Main compression (upper) o Main compression (lower) o Pre-compression (upper) o Ejection force o Scraping force o Upper and lower punch displacement • Measuring amplifiers for main, pre-comp, ejection, and scraping force included Equipment / Features • Upper and lower punch shank bores with 4.8 mm keyways for guided tooling • Chamber-type feeder • Turret hard chrome plated • Main compression force measurement incl. indicator on operator terminal • Accessory kit type 8 MX: o 4 EU-B blank dies o 4 EU-D blank dies o 4 plugs for EU-B/EU-D or TSM-B/TSM-D Optional • Control retrofit with Siemens S7-1200 and Siemens TP panel possible.

Condition: used, functionality: fully functional, Year of construction: 2016, operating hours: 1,685 h, maximum speed: 80 km/h, overall weight: 11,500 kg, total height: 2,500 mm, mobility: stationary, machine/vehicle number: 11520, For sale is this used Husmann HFG IV (HFG4) shredder, year of manufacture 2016. Operating hours: 1685 h All 60 flail tips were replaced just a few operating hours ago. Some spare flails are still available and will be included in the sale. All 8 V-belts were also replaced just a few operating hours ago. Both NOx sensors as well as AdBlue sensors are new. Important note: Drawbar is bent, therefore currently not road-legal. Throughput: 60-100 m³/h depending on material and feeder equipment Recommended max. log diameter: 200 mm Machine No.: 11520 Max. revolutions per minute: 1200 rpm Dsdpfx Adsy Hi D So Nout Operating voltage: 24 V Operating pressure: 160 bar Power: 205 kW Permissible total weight: 11,500 kg Manufacturer’s Description: FLAIL SHREDDER HFG VI "These powerful Husmann machines, designated “HFG (Husmann forestry equipment)”, achieve a uniform, fine, and clean shredding result thanks to their special beating technology and flail arrangement. The shredded material is fed via a spacious intake hopper with forged steel chain conveyor to the infeed roller and onward to the flail rotor. The pendulum-mounted infeed roller is guided by rack-and-pinion and driven hydraulically by a large reduction gearbox. Adaptable to the material being fed, the roller can also be operated and lifted by remote control. The roller or feed aperture of 460 mm ensures smooth and fast feeding. The robust rotor, made from high-grade steel (1000 kg), reinforced with additional bracing and mature construction techniques, is break-proof even when processing heavy foreign materials. Sixty free-swinging flails are arranged in offset positions on eight hardened flail shafts. The quick-change system allows the carbide-tipped flail tips to be bolted on to the flail holders. With the large number of 50 mm wide flails and the rotor’s direction of rotation across a breaker bar towards the infeed belt, the shredding material is optimally fragmented and made compostable. The load-dependent and continuously adjustable feeding speed of the scraper floor and infeed roller allows further influence and improvement of the output product quality. The rotor trough and discharge area design allows for windrow heights up to 2.5 meters. The powerful 205 kW auxiliary engine is easily accessible through large service doors, making operation and maintenance simple. Clear controls and safety features such as rotor overload protection and a reversing device are quality hallmarks of our plant. The mobile shredding unit is equipped with an 80 km/h running gear and air brakes, and can be configured either stationary or with a hooklift frame. The HFG IV is a composting machine for organic and inorganic waste, suitable for mechanical feeding." If you have any questions or require further information, feel free to send us a message or give us a call.