Used Telemecanique Contactor for sale (250)

Condition: reconditioned (used), Year of construction: 2005, operating hours: 30,408 h, functionality: fully functional, pressing force: 50 t, filling opening width: 1,250 mm, filling opening length: 1,100 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 550 kg, overall weight: 16,000 kg, oil tank capacity: 600 l, power: 22 kW (29.91 HP), year of last overhaul: 2025, volume flow: 530 m³/h, Technical data baler: Manufacturer Presona AB Type LP 50 EH1 Year of construction 2005 Operating hours 30,408 hours, as of April Number of pressed bales 198,059 as of April Pressing force main press 50 tonnes Specific pressing force 63 N/cm² Theoretical throughput capacity 530 m³/hour Throughput capacity under operating conditions 260 m³/hour Dimensions of feed chute 1,250 x 1,100 mm Bale chamber volume 2.2 m³ Bale dimensions 1,100 x 720 mm, variable length Drive power 22 kW Tying 5-fold vertical, fully automatic Throughput rates with a bulk density of 30 kg/cbm 6 up to 7 tonnes/hour Bulk weight of 50 kg/cbm 7 up to 9 tonnes/hour Bulk weight of 100 kg/cbm 11 up to 14 tonnes/hour Bale density (paper/newspapers) 400 to 550 kg/m³ Hydraulic oil tank capacity 600 litres PLC control Telemecanique TSX Micro Schneider Magelis control panel Effective transport dimensions excl. baler 8,125 x 2,300 x 3,000 mm (L x W x H) Transport weight press approx. 16 tonnes Condition of the baler: The machine was partial overhauled in our workshop and general maintenance work was carried out. After completion of the overhaul work, the press was tested during operation and is available for sale at short notice. The following overhaul work was carried out: General work: Machine cleaned, derusted, primed, partially painted Wire entry marks in the press channel feed-throughs welded shut and smoothed Hydraulic unit: Hydraulic oil tank emptied, tank cleaned, new oil filled Oil filter and air filter replaced Leaky oil sight glass on hydraulic oil tank replaced All hydraulic hoses replaced Electrics: English language installed in the programme menu Two key switches in the control panel replaced Control cabinet replaced Signal lamp on the control cabinet replaced Flaps end switch replaced Electrical system of the whirling unit replaced, connected and tested Press ram: All four rollers removed from the press ram and replaced Main hydraulic cylinder dismantled, disassembled and partially overhauled, cylinder tube honed, complete seal set replaced, leak test performed All plastic wear pads on the press ram replaced Pre-press: Both bearings on the pre-press shaft replaced. Both hydraulic cylinders dismantled, disassembled and partially overhauled, both cylinder tubes honed, complete seal sets replaced, leak test performed. Scraper flap on the pre-press replaced. Binding system: Two complete needles with wire deflection rollers replaced Needles adjusted and set All wire deflection rollers in the needle heads replaced Lrsdpfx Aoy R Npiekujl Drill fingers replaced Two drill shafts replaced All 8 wear plates on the Drillomat, under the drill fingers, replaced Scope of delivery: Only the baler will be sold. The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, Year of construction: 2003, 1 used very good condition universal milling machine with 3-axis digital display FAGOR, stepless feed and top support drive Make: ARSENAL, Bulgaria Model: FUV 321 M year of manufacture: 2003 Technical data: Spindles: Spindle mounting vertical + horizontal ISO 50 Speed range, vertical, infinitely variable 30 - 2000 rpm Speed range, horizontal, infinitely variable 30- 2000 rpm Table: Table clamping surface 1350 x 320 mm Lrsdpsbpmurefx Akusl X-axis, manual / mechanical 1100 / 1080 mm Y-axis, manual / mechanical 360 / 340 mm Z-axis, manual / mechanical 460 / 440 mm Upper arm adjustment approx. 600 mm table tiltable ± 45 max. distance table surface to horizontal spindle center 490 mm max. distance table surface to vertical spindle nose 630 mm table adjustment: feeds lengthwise and crosswise, infinitely variable 12.5 - 630 mm/min ditto vertical, infinitely variable 5 - 262 mm/min rapid traverse longitudinal and transverse 2,5 m/min ditto vertical 1,04 m/min Drive drive power 7,5 kW Dimensions and weight Dimensions L x W x H 2000 x 2500 x 2050 mm Weight 3200 kg Accessories / Special features: - 3-axis digital display make FAGOR model NV 300 M - Universal milling head system "HURON" manually adjustable over 2 levels - Stepless feed via joystick and potentiometer in all 3 axes - Stepless speed for vertical + horizontal via potentiometer with 2 servo drives make TELEMECANIQUE model Altivar 28 - Stepless feed and stepless speed with digital display in each case - Upper arm with motor drive of the universal milling head - E [...]

Condition: good (used), Year of construction: 1978, functionality: fully functional, power: 23 kW (31.27 HP), pressing force: 63 t, table width: 480 mm, table length: 560 mm, ram plate width: 280 mm, ram plate length: 280 mm, total length: 1,800 mm, total width: 1,000 mm, total height: 2,650 mm, overall weight: 4,000 kg, year of last overhaul: 1991, - Fixed stop - Punch damping - Conventional control (contactor) Lsdpfoy R Sltjx Akuorl

Condition: like new (used), Year of construction: 2023, operating hours: 200 h, functionality: fully functional, machine/vehicle number: 2022LW160, High-speed roll forming line, equipped with tooling for the production of GELAN and SCHUCO metal profiles used in PVC window frame manufacturing. Machine achieves speeds up to 55 m/min with 6 m profile length production. Maximum processable material thickness is 2.5 mm. Upper and lower shaft diameter is 60 mm, the width between the stands is 360 mm, and each station is driven by an individual gearbox with two cardan shafts. Both upper and lower shafts are driven at each station. The line features 15 forming stands plus two straightening stands (Turkish heads). All forming rollers have a surface hardness of 62 HRC. Additionally, all auxiliary rollers and shafts in contact with the material are induction-hardened to 58–62 HRC (including run-out table rollers and horizontal accumulator rollers). A flying cut servo positioning system (DELTA 7.5 kW servo motor, ball screw, and linear guides) facilitates precise length adjustments via HMI. Hydraulic cutting system included. The run-out table features an automatic profile kickout, conveying, and separation system for continuous production without stopping. The horizontal entry accumulator for strip material ensures uninterrupted production, equipped with pinch rollers and individual drives. Double-sided hydraulic decoiler included. The line is equipped with a continuous ink-jet marking system from KONING (Germany). The automatic stacking system is not installed (see photos). The machine features recirculating cooling and lubrication across all 15 stations. Electronics: SIEMENS (PLC, contactors), SCHNEIDER (contactors), DELTA (Taiwan drives and servo). Main electric motors by Siemens. Bearings by SKF. The mechanical frame is stress-relieved and milled for precision. Lredpfoyw Rzajx Akujl The machine has only been used for test production, having processed just 250,000 m of material (machine is nearly new). It is installed and connected to power; test runs can be arranged on-site. The listed price refers to the machine disassembled and loaded onto a truck. Included is comprehensive documentation with detailed tooling setup instructions for each profile (including detailed assembly drawings of rollers). Model: LW160 Supply voltage: 380 V Installed power: 73.5 kW (consumes only 40% of power when processing 2 mm strip) Frequency: 50 Hz Weight: 16,500 kg Current: 160 A Serial number: 2022LW160 Year of production: 2022 Year of on-site assembly: 2023

Condition: used, Specifications: Composed of 2 motorized 90° curved conveyors. Curve radius: 3 m at axis. Total deployed length: 4.80 m. Overall conveyor structure width: 750 mm. Varnished beechwood slats: 620 x 54 x 42 mm. Adjustable height from floor: 500–650 mm. Driven by chains and sprockets. Lrodpfsx Sx Iqex Akusl Lateral guidance and lower return via slide rails made of synthetic material. Integrated drive gearmotor. Contactor-disconnector box. Emergency stop and isolator. Control cabinet with electronic frequency inverter operating both curved belts.

Condition: good (used), PTC relays, contactors, semiconductor contactors, relays, isolation amplifiers, temperature transducers Lodpef Ir D Ajfx Akuorl -Manufacturer: Phoenix Contact, PT100 temperature monitor -Type: MCR-SL-PT100-SP -Price: per piece -Quantity: 7 pieces -Dimensions: 100/13/H115 mm -Weight: 0.1 kg/piece

Condition: used, Year of construction: 1992, Used machine Year of manufacture: 1992 Features and technical data: - Suitable for craft enterprises, equipped with 1 combi unit for top-side sanding - Working width: 950 mm - Sanding belt dimensions: 970 mm wide, 1700 mm long - 1 combined contact roller and sanding shoe unit, drive motor 7.5 kW, with 85 Shore contact roller and sanding shoe with felt pad and sliding coating - DFL veneer sanding device - Workpiece-controlled air cushion sanding shoe - Protected storage for sanding shoe within the machine - Sanding belt drive with automatic star-delta starter and maintenance-free, wear-free electric braking system - Additional storage for a second sanding tongue - Safety shutdown when door is opened - Pneumatic sanding belt tensioning system - Feed belt mechanism driven by a worm gear motor, feed speeds of 4 and 8 m/min, and automatic belt tracking control - LED digital display for workpiece thickness adjustment - Safety shutdown at machine infeed for over-thick workpieces - Indicator lights for operation status - Optimally arranged dust extraction hood with port (D=160 mm) for the sanding belt - Roller table at infeed - Complete pneumatic control system, including automatic pressure monitor, control, and monitoring devices - All main electrical switchgear—main switch, fuses, contactor control with motor protection relay, indicator devices—in VDE-compliant design - Total connected load: approx. 9 kW - Operating voltage: 380 V, 50 Hz - Dimensions: approx. 1500 x 1650 x 2000 mm - Weight: approx. 1200 kg Availability: by arrangement Lrodey R E U Uopfx Akujl Location: 63934 Röllbach

Condition: new, Siemens 3TF53 22-1DB4 contactor 110kw 400V AC-3 ,unused in opened original box, 100% working, scope of supply acc. photos Lrodpfx Akji Eda Heujl

Condition: new, Siemens 3TF53 22-1DB4 contactor 110kw 400V AC-3 ,unused in opened original box, 100% working, scope of supply acc. photos Lrsdpfxoi Eda Re Akusl

Condition: new, Column drilling machine Make: ALZMETALL Model: AX 3 iTRONIC-V Year of manufacture: 2023 Condition: New machine Speed 80 - 1.125 rpm. standard equipped with: - 7" TFT - LCD display with touch function: Manual input spindle speed setpoint, Speed display actual value, Integrated drilling depth display with Touch zero point transfer, Virtual drilling depth scale in the display, Ledpfx Aoh I N Trekujrl Machine status displays and warnings in display, service information, Selectable operator language: DE/EN/FR/ES/IT/NL/RU. - Thread cutting device - Speed adjustment, stepless, by means of lever - Speed display, digital - Three separate buttons for clockwise rotation - counterclockwise rotation - stop - clockwise and counter-clockwise rotation via contactor control - automatic drill feed with feed overload protection - spindle protection - operating instructions other important technical data: - 40 mm drilling capacity in ST 60 - 120 mm quill stroke - spindle cone MK 3 - 115 mm column diameter - feed rate 0,1 + 0,2 mm/rev - 1,45 / 1,9 kW Motor power - 515 x 360 mm Table dimension with the following options: - LED machine light - foot switch, complementary to the threading device - Technology calculator in the display - Drilling depth fine adjustment and fixed stop

Condition: as good as new (ex-display), Column drilling machine Make: ALZMETALL Model: AX 3s iTRONIC Condition: New machine Speed 100 - 1.800 rpm. equipped as standard with: - 7" TFT - LCD display with touch function: Manual input spindle speed setpoint, Speed display actual value, Integrated drilling depth display with Touch zero point transfer, Virtual drilling depth scale in the display, Machine status displays and warnings in display, service information, Selectable operator language: DE/EN/FR/ES/IT/NL/RU. - Thread cutting device - Speed adjustment, stepless, by means of lever - Speed display, digital - Three separate buttons for clockwise rotation - counterclockwise rotation - stop - Clockwise and counterclockwise rotation via contactor control - spindle protection Lrodpfx Asiypz Eokuol - Operating instructions other important technical data: - 30 mm drilling capacity in ST 60 - 140 mm quill stroke - spindle cone MK 3 - 115 mm column diameter - 1,0 / 1,6 kW motor power - 515 x 360 mm Table dimension with the following options: - LED machine light - automatic spindle stop - technology calculator in display - workpiece counter

Condition: new, As-new, unused electric chain hoists from Liftket. Load capacity: 250kg. Main lifting speed: 18.0 m/min. Fine lifting speed: approx. 4.50 m/min. Number of strands: 1. Hoist group: 3m/M6. Voltage/Frequency: 400V/50Hz. Control type: contactor control. Control voltage: 24V. Lifting height: 125m. Chain type – finish: 5.2x15/EN 818-7-T. Hook version: hook suspension with rubber sleeve. Number of lifting speeds: 2, with emergency stop. Control cable: 2m. Further details available upon request. Lredpfx Akjy I Upvsuel

Condition: reconditioned (used), Year of construction: 2007, operating hours: 22,605 h, functionality: fully functional, pressing force: 100 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,400 kg, overall weight: 36,000 kg, oil tank capacity: 1,300 l, year of last overhaul: 2025, For sale is a overhauled baler, with 100 tonnes pressing force, large format 1100 x 1100 mm, 75 kW drive power and 10-fold cross binding Technical data baler: Manufacturer Bollegraaf Typ HBC 110 K / 75 kW Year of construction 2007 Press power main press 100 tons Press power of pre-press 50 tons Operating hours 22,605 hours Feed channel 1,600 x 1,100 mm Capacity per cycle time 3,15 m³ Theoretic cycle time 19 sec. Bale size 1,100 x 1,100 mm Driving motor 75 kW Connected load 126 kW Full load current 238 A Tying system 5-fold vertical, 5-fold horizontal, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx.16 tons/h bulk weight of 50 kg/cbm approx. 25 tons/h bulk weight of 100 kg/cbm approx. 47 tons/h Bale weight up to 1400 kg, depends on material and bale lenght Volume oil tank approx. 1,300 l SPS controller Telemecanique TSX Micro Operating panel Schneider MAGELIS Touch Baler dimensions built up with hopper 11,750 x 5,000 x 7,105 mm (l x w x h) Transport dimensions only baler 11.750 x 2.500 x 3.450 mm (l x w x h) Machine weight baler approx. 36 tons Comments: The press was partially overhauled and serviced in our workshop and tested and stored after completion of the work. The machine is available at short notice and can be inspected in our warehouse by appointment. The following overhaul work was carried out: Rust removal and partial painting of the press. Remaining hydraulic oil tank drained, oil filter and air filter replaced. New hydraulic oil topped up. All hydraulic hoses replaced. Main hydraulic cylinder, two cylinders of the prepress flap and the cylinder of the press channel dismantled, disassembled, checked, cylinder tubes honed, all seal sets replaced and a final pressure test carried out. Disassembly of the prepress flap with bearings and bearing blocks. 1st and 3rd circular arc segmet cut out and a new one welded in again. Both bearings of the shaft of the prepress flap replaced. Upper material deflector on the frame of the prepress flap replaced. Press ram dismantled, checked and both front rollers replaced. Material deflectors and wear profiles on the sides and base of the press ram cut off and new ones welded in. Horizontal and vertical needle and tying unit dismantled, disassembled, checked, plastic sliding plates, bearings of the drill shafts and wire deflection rollers with bearings in the needle heads replaced. Both bronze slide rails on the left and right in the frame cover to the press ram replaced. Both wire deflection units on the left and right, with bale retaining clamps, completely renewed. Wire insertion unit including hydraulic cylinder under the needle feedthroughs completely renewed. Wire entry marks in the floor and side walls of the bale chamber welded shut and smoothed. General maintenance and service work carried out in accordance with the manufacturer's specifications. Press was tested in manual and automatic mode, accepted and stored after completion of overhaul work. Lrodpjvf E Avjfx Akuel We accept no liability for the technical specifications or any errors.

Condition: reconditioned (used), Year of construction: 2000, operating hours: 32,169 h, functionality: fully functional, pressing force: 60 t, filling opening width: 1,100 mm, filling opening length: 1,320 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 750 kg, overall weight: 22,000 kg, oil tank capacity: 900 l, For sale is a complete baling system consisting of conveyor technology, baling press (partially refurbished and tested) and wire stations. Technical data baler: Manufacturer Bollegraaf Recycling Machinery B.V. Typ HBC 60A Year of construction 2000 Hours of operation 32,169 hours, stand November 2024 Press power main press 60 tons Press power of pre-press max. 25 tons Feed channel 1,320 x 1,100 mm Theoretic cycle time 18 sec. Bale size 1,100 x 720 mm, lenght variable Lrjdpfx Akjviwdmouel Driving motor 45 kW Connected load 60 kW Tying system 5-fold vertical Throughput rate at a bulk weight of 30 kg/cbm approx. 5,5 tons/hour bulk weight of 50 kg/cbm approx. 10 tons/hour bulk weight of 100 kg/cbm approx. 16 tons/hour Bale weight 400 up to 750 kg, depends on material SPS controller Telemecanique TSX Micro Machine weight baler approx. 24 tons Scope of delivery: 1 piece chain belt conveyor 1 Bollegraaf HBC 60A baler with whirling unit 1 maintenance platform with access ladder 2 wire stations with deflection rollers for 10 wire reel stands (without wire) The following repair and overhaul work was carried out: Hydraulic oil tank emptied, cleaned and refilled with new oil Oil filter and air filter replaced Hydraulic block partially resealed Hydraulic hose on hydraulic block replaced Wire entry marks on the floor passages welded shut and smoothed Tying unit cleaned, serviced Electrical system repaired, door flap contact switch partially replaced Whirbulator repaired General maintenance work carried out, lubricated Machine tested during operation, without the use of materials, in manual mode and in automatic mode, see function video Comments: The system has already been completely dismantled, stored and is available for loading at short notice. The documentation (BA, CE, electrical/hydraulic circuit diagram) is available. Viewing is possible by appointment. We accept no liability for the technical details or any errors.

Condition: new, functionality: fully functional, Year of construction: 2025, operating hours: 2 h, machine/vehicle number: 111, load capacity: 250 kg, mast type: duplex, Equipment: ABS, GSR B240PX – AUTO KOŠARA Stanje: NOVO (2025.) VOZILA U PONUDI Iveco Daily MY24 35S14H Mercedes-Benz Sprinter MY24 315CDI 37/35 TEHNIČKE SPECIFIKACIJE Radna visina: 23,7 m Bočni doseg (80 kg): 12,3 m Bočni doseg (250 kg): 8,25 m Nosivost košare: 250 kg Radni djelokrug: 450° Rotacija košare: 70° + 70° DODATNE INFORMACIJE ✅ Mogućnost kupnje putem leasinga ili kredita ✅ Cijena i dodatne konfiguracije na upit ✅ Mogućnost ugradnje klime ✅ Registracija i atest uključeni u cijenu za Hrvatsku! ✅ Servis i rezervni dijelovi osigurani ZAŠTO ODABRATI GSR AUTO KOŠARE? 🔹 Više od 130 godina iskustva u proizvodnji. 🔹 Svaki stroj se ručno sastavlja i višestruko testira prije isporuke. 🔹 Korišteni samo najkvalitetniji materijali – švedski STRENX i njemački THYSSEN-KRUPP čelici. 🔹 Sve komponente dolaze isključivo s europskog tržišta – vrhunska kontrola kvalitete. 🔹 GSR auto košare su sinonim za pouzdanost, sigurnost i dugovječnost. ELEKTRIČNI SUSTAV Kvalitetne instalacije, senzori i zaštitni prekidači vodećih proizvođača: BOSCH • SCHNEIDER • GEWISS • PENNY+GILES • TELEMECANIQUE • OMRON HIDRAULIČKI SUSTAV Precizan i siguran rad pod visokim tlakovima zahvaljujući provjerenim komponentama: Lodpfxexvx S Ue Akusrl BOSCH • BREVINI • ATLANTIC-FLUID TECH • WALVOIL • REXROTH • PIRELLI CIJENA: NA UPIT Cijena ovisi o vozilu i konfiguraciji. Više od 30 godina iskustva u: 🔹 Servisu 🔹 Najmu 🔹 Prodaji auto košara 🌍 GENERALNI ZASTUPNICI ZA: Hrvatsku, Sloveniju, Crnu Goru, Bosnu i Hercegovinu i Srbiju

Condition: new, functionality: fully functional, Year of construction: 2025, operating hours: 3 h, machine/vehicle number: 12, load capacity: 250 kg, mast type: duplex, lifting height: 22,000 mm, Equipment: ABS, 🚀 GSR B220PXE – AUTO KOŠARA Stanje: NOVO (2026.) 🚚 VOZILA U PONUDI Iveco Daily MY24 35S14H Mercedes-Benz Sprinter MY24 315CDI 37/35 ⚙️ TEHNIČKE SPECIFIKACIJE Radna visina: 21,75 m Bočni doseg (120 kg): 11,25 m Bočni doseg (250 kg): 8,45 m Nosivost košare: 250 kg Radni djelokrug: 450° Rotacija košare: 90° + 90° 💡 DODATNE INFORMACIJE ✅ Mogućnost kupnje putem leasinga ili kredita ✅ Cijena i dodatne konfiguracije na upit ✅ Mogućnost ugradnje klime ✅ Registracija i atest uključeni u cijenu za Hrvatsku! ✅ Servis i rezervni dijelovi osigurani 💪 ZAŠTO ODABRATI GSR AUTO KOŠARE? 🔹 Više od 50 godina iskustva u proizvodnji. 🔹 Svaki stroj se precizno sastavlja i višestruko testira prije isporuke. 🔹 Korišteni samo najkvalitetniji materijali – švedski STRENX i njemački THYSSEN-KRUPP čelici. 🔹 GSR košare su sinonim za pouzdanost, sigurnost i dugovječnost. 🔹 Sve komponente dolaze isključivo s europskog tržišta, od proizvođača s najvišom razinom kontrole kvalitete. ⚡ ELEKTRIČNI SUSTAV Pouzdan i siguran rad zahvaljujući vrhunskim komponentama: BOSCH • SCHNEIDER • GEWISS • PENNY+GILES • TELEMECANIQUE • OMRON Ledpsxvx Rqjfx Akusrl 💧 HIDRAULIČKI SUSTAV Stabilan i precizan rad pod visokim tlakovima – provjerena kvaliteta: BOSCH • BREVINI • ATLANTIC-FLUID TECH • WALVOIL • REXROTH • PIRELLI 💰 CIJENA: NA UPIT 📞 Kontaktirajte nas za individualnu ponudu i dostupne konfiguracije. Više od 30 godina iskustva u: 🔹 Servisu 🔹 Najmu 🔹 Prodaji auto košara 🌍 GENERALNI ZASTUPNIK ZA: Hrvatsku, Sloveniju, Crnu Goru, Bosnu i Hercegovinu i Srbiju

Condition: new, functionality: fully functional, Year of construction: 2025, operating hours: 1 h, machine/vehicle number: 1, power: 100.03 kW (136.00 HP), load capacity: 250 kg, mast type: telescopic, lifting height: 22,800 mm, Equipment: ABS, GSR B230T4 – AUTO KOŠARA TELESKOPSKA Stanje: NOVO (2026.) VOZILA U PONUDI Iveco Daily MY24 35S14H Mercedes-Benz Sprinter MY24 315CDI 37/35 TEHNIČKE SPECIFIKACIJE Radna visina: 22,8 m Bočni doseg (80 kg): 14,4 m Bočni doseg (250 kg): 10,0 m Nosivost košare: 250 kg Radni djelokrug: 450° Rotacija košare: 90° + 90° DODATNE INFORMACIJE Mogućnost kupnje putem leasinga ili kredita Cijena i konfiguracije na upit Mogućnost ugradnje klime Lrsdpfxoxvx E Us Akuel Registracija i atest uključeni u cijenu za Hrvatsku! Servis i rezervni dijelovi osigurani ZAŠTO ODABRATI GSR AUTO KOŠARE? Više od 50 godina iskustva u proizvodnji i usavršavanju tehnologije Nema masovne proizvodnje – svaki stroj se precizno sastavlja i testira Korišteni samo vrhunski materijali: • Švedski čelik STRENX • Njemački čelik THYSSEN-KRUPP GSR auto košare su poznate po pouzdanosti, dugovječnosti i jednostavnom radu ELEKTRIČNI SUSTAV Pouzdan i siguran rad zahvaljujući komponentama vodećih svjetskih proizvođača: BOSCH • SCHNEIDER • GEWISS • PENNY+GILES • TELEMECANIQUE • OMRON HIDRAULIČKI SUSTAV Visoka sigurnost i preciznost zahvaljujući vrhunskim hidrauličkim komponentama: BOSCH • BREVINI • ATLANTIC-FLUID TECH • WALVOIL • REXROTH • PIRELLI CIJENA: NA UPIT Kontaktirajte nas za individualnu ponudu i dostupne konfiguracije. Više od 30 godina iskustva servisiranju, prodaji auto košara! Generalni zastupnik i ovlašteni servisni centar za talijanske premium auto košare GSR UVOZNIK I GENERALNI ZASTUPNIK ZA: Hrvatsku • Sloveniju • Crnu Goru • Bosnu i Hercegovinu • Srbiju

Condition: new, functionality: fully functional, Year of construction: 2025, operating hours: 10 h, machine/vehicle number: 123, power: 100.03 kW (136.00 HP), load capacity: 300 kg, mast type: telescopic, fuel type: diesel, color: white, Equipment: ABS, 🚀 NOVO – GSR TELESKOPSKA AUTO KOŠARA 18M (2026.) 🔧 TEHNIČKE SPECIFIKACIJE Radna visina: 17,8 m Bočni doseg (80 kg): 12,8 m Bočni doseg (300 kg): 8,15 m Nosivost košare: 300 kg Radni djelokrug: 450° (moguć rad iznad kabine) Rotacija košare: 70° + 70° 🚚 VOZILA U PONUDI Iveco Daily MY24 35S14H Mercedes-Benz Sprinter MY24 315CDI 37/35 Lrjdpfx Ajxvxwdekuol ⚙️ STANJE I DOSTAVA ✅ Novo vozilo – model 2026. ✅ Dostupno odmah (ILI NARUČITI). ✅ Registracija i atest uključeni u cijenu za Hrvatsku ✅ Mogućnost kupnje putem leasinga ili kredita. ✅ Mogućnost ugradnje klime. 💪 ZAŠTO ODABRATI GSR AUTO KOŠARE? 🔹 Više od 50 godina tradicije – proizvodnja usmjerena isključivo na kvalitetu i dugotrajnost. 🔹 Nema masovne proizvodnje – svaki stroj se ručno sastavlja i testira više puta. 🔹 Korišteni samo vrhunski materijali: Švedski čelik STRENX Njemački čelik THYSSEN-KRUPP (debljine 2 mm) 🔹 Rezultat: pouzdan rad bez zastoja – potvrđeno od strane brojnih kupaca kroz 30+ godina! ⚡ ELEKTRIČNI SUSTAV Kvalitetne instalacije, senzori i zaštitni prekidači vodećih svjetskih proizvođača: BOSCH • SCHNEIDER • GEWISS • PENNY+GILES • TELEMECANIQUE • OMRON 💧 HIDRAULIČKI SUSTAV Precizan, siguran i dugotrajan rad pod visokim tlakovima – zahvaljujući komponentama marki: BOSCH • BREVINI • ATLANTIC-FLUID TECH • WALVOIL • REXROTH • PIRELLI 💰 CIJENA NA UPIT 🔸 Servis i rezervni dijelovi osigurani 🔸 Generalni zastupnici GSR auto košara 🔸 Dugogodišnje iskustvo u prodaji, servisu i najmu GENERALNI ZASTUPNIK I OVLAŠTENI SERVISNI CENTAR TALIJANSKIH PREMIUM AUTO KOŠARA GSR 📍 Za Hrvatsku, BiH, Crnu Goru, Makedoniju, Sloveniju i Srbiju

Condition: new, functionality: fully functional, Year of construction: 2026, operating hours: 0 h, machine/vehicle number: 100, load capacity: 250 kg, mast type: telescopic, lifting height: 27,000 mm, Equipment: ABS, AUTO KOŠARA GSR B270T (2026) Stanje: Novo | Dostupnost: Odmah isporuka VOZILA – OPCIJE ŠASIJE Iveco Daily MY24 35S14H Mercedes-Benz Sprinter MY24 315CDI 37/35 TEHNIČKE SPECIFIKACIJE Radna visina: 26,65 m Bočni doseg (80 kg): 16,0 m max. Bočni doseg (250 kg): 11,2 m max. Nosivost košare: 250 kg Radni zahvat: 450° Rotacija košare: 90° + 90° Standardna boja: RAL 9010 (šasija), RAL 9011 (podokvir i oslonci) Platforma: protuklizna aluminijska površina Košara: aluminijska, 1400 × 700 × 1100 mm, tip “Walk-In”, s veznim točkama za sigurnosni pojas Ukupna masa vozila: 3.500 kg Pogon: stražnji (4×2) Mjenjač: mehanički – 6 brzina / 500 Nm Motor: 2.3 L F1A EURO 6D – 136 KS Međuosovinski razmak: 3.750 mm Volan: s lijeve strane Kotači: 225/65 R16 M+S – jednostruki Kabina: jednostruka (2 sjedala) Boja vozila: Polar bijela FUNKCIJE I HIDRAULIČKO-ELEKTRONIČKI SUSTAV Automatske kontrole stabilizacije u košari i na zemlji Tip stabilizacije: prednji i stražnji – proširivi/vertikalni podupirači Mogućnost simultane manipulacije pokreta Automatsko podešavanje brzine motora Višenamjenski joystick u košari s proporcionalnim elektro-hidrauličnim kontrolama Elektronički upravljački sustav CAN BUS Automatsko niveliranje košare Home Function – automatski povratak u početni položaj Pokretanje i gašenje motora iz košare Ograničivač momenta s dvostrukom sigurnošću Inklinometar (kut nagiba) Zaključni ventili s prirubnicom Zaštita kontrola u košari Sigurnosni bypass za spašavanje operatora Gumb za hitno zaustavljanje i gašenje motora s bilo koje kontrolne pozicije Ručna pumpa za hitne situacije Uređaj za sprječavanje sudara ruke i kabine Indikator zatvorenih stabilizatora u kabini Indikator centriranja zračnog dijela na košari Digitalni brojač radnih sati s indikatorom pozicije stabilizatora ELEKTRIČNI KOMPONENTI BOSCH, SCHNEIDER, GEWISS, PENNY+GILES, TELEMECANIQUE, OMRON Lredpfoxvx N Tjx Akuel HIDRAULIČNI KOMPONENTI BOSCH, BREVINI, ATLANTIC-FLUID TECH, WALVOIL, REXROTH, PIRELLI OPREMA I DODATCI Čelični naplatci Stražnji prozor u kabini Centralno zaključavanje s daljinskim upravljačem Upozorenje za razinu ulja i tlak u gumama ESP sustav + AEBS City Brake (aktivna sigurnost) Asistent za brzinu i inteligentni ograničivač brzine Indikator pospanosti vozača + snimač događaja Automatska kontrola brisača vjetrobrana Prednji zaštitni okvir kabine Zračni jastuci (vozač i suvozač) Bluetooth radio s USB utičnicom Power Take-Off (PTO) za hidrauličku pumpu Set PVC ploča 300×300×30 mm za oslonce DODATNE INFORMACIJE Financiranje putem leasinga ili kredita Cijena i konfiguracije na upit Ugradnja klima-uređaja po želji kupca uz nadoplatu! Registraciju vršimo za Hrvatsku! ORIGINAL C.O.C. UKLJUČEN U CIJENU: C.O.C. ORIGINAL ZA IVECO ILI MERCEDES C.O.C. ZA NADOGRADNJU GSR B270T NA IVECO ILI MB! SA TA DVA ORIGINAL C.O.C.-a. SE AUTO KOŠARA GSR B270T REGISTRIRA U BILO KOJOJ DRŽAVI U EUROPSKOJ UNIJI (EU) I IZVAN, BEZ IKAKVIH DODATNIH ATE- STIRANJA - DAKLE APSOLUTNO NEKOMPLICIRANO! Servis i rezervni dijelovi osigurani Svi komponenti europskog porijekla – maksimalna kvaliteta i pouzdanost! +++OD PROFESIONALCA ZA PROFESIONALCE+++ MI SMO: Uvoznik i generalni zastupnik za GSR auto košare za Hrvatsku, Sloveniju, Crnu Goru, B i H, Srbiju. Više od 30 godina iskustva u prodaji, servisu i najmu radnih platformi. Prva ruka – servis, rezervni dijelovi i tehnička podrška dostupni u cijeloj Hrvatskoj. Cijena: na upit

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, CEROX 1000 Hot Stamping / Thermal Transfer Printing Machine — 1999 Brand: CEROX Model: 1000 Year: 1999 Type: Thermal transfer printing machine Cycle counter: 130,342 cycles Compatible surfaces: Cylindrical, oval, and irregular shapes (ideal for bottles and jars) Controller: Telemecanique Dimensions: 1,900 x 2,500 x 1,870 mm Includes: ✅ Aluminium tooling ✅ Silicone tooling ✅ Consumables and spare parts ✅ Sample engravings Ledpfx Akoy Eyicsusrl Condition: Good Location: Albacete, Spain Available for inspection by appointment VAT invoice available

Condition: new, Shaft diameter: 120roll diameter: 390motor power: 15length: 2000width: 1650heigth: 1900weight approx.: 4450 Standard Equipment • Steel construction frame • 3 rolls powered by hydromotor and planetary gearbox • Horizontal and vertical working position • Mobile control panel • Hardened standard rolls • Hardened and ground shafts made of high-tensile special steel • Digital read-outs (2 pcs) • 3-axis hydraulic lateral angle guide rolls • Two-speed working system • Hydraulic elements: Duplomatic (Italy) components used • Electrical equipment: Siemens (Germany) or Telemecanique (France) Lsdpoy Hymqjfx Akuerl • Built according to EC safety directives (CE mark) and ISO 9000 certificate • User’s manual in English Options: - NC Unit 7 Screen EURO 7.500,-- Capacity Chart: NoProfile TypeSize Max Min. es1125x25 1200 Standard Rolls2200x50 1000 Standard Rolls365x65 750 Standard Rolls4Ø80 850 Optional Rolls5Ø5”x6,35 1500 Optional Rolls6Ø160x4 2800 Optional Rolls7120x40x4 1800 Optional Rolls890x5 1800 Optional Rolls9120x120x12 1200 Optional Rolls 10100x100x10 1200 Optional Rolls 11100x11 800 Standard Rolls12100x11 1000 Standard Rolls13100x11 800 Optional Rolls14UPN 220 1000Standard Rolls*15UPN 220 1200 Standard Rolls*16IPN 220 1000 Standard Rolls *17HEB 120HEA 14012001200Standard Rolls *18UPN 120 10000 Optional Rolls 19IPN 160 5000 Optional Rolls 20HEB 100HEA 12016004000Optional Rolls

Condition: good (used), Year of construction: 2009, lifting height: 6,100 mm, fuel type: electric, Drivetrain Drive: Wheel Weights Empty weight: 1.810 kg Functional Ljdpfxjv Tib Ss Akuerl Lifting capacity: 360 kg Working height: 810 cm CE mark: yes Condition Technical condition: good Visual appearance: good Other information Delivery terms: EXW Transport dimensions (LxWxH): 2,21x0,71x1,72 Production country: JP Additional information Please contact Christian Theißen for more information Manufacturer: Aichi Model: SV06CNL Year of build: 2009 Condition: Used Data: Max. working height: 8,10 m Max. platform height: 6,10 m Drive type: Battery Platform dimensions LxW: 2,21 x 0,71 m Length of the platform extension: 1,00 m Lifting capacity: 360 kg Lifting capacity on extension: 120 kg Total dimensions LxW: 2,30 x 0,80 m Height transport position with railing: 2,125 m Height transport position without railing: 1,715 m Max. Wheel load: 800 kg Gradeability: 25% Max. permissible longitudinal tilt angle: 3° Max. permissible cross slope angle: 1,5° Empty weight: 1.810 kg Special features: weiße Reifen, Anschlagpunkte für Rückhaltsysteme(PSA) vorhanden, nur Inneneinsatz Information: 3057 + 3058 Electrical problem, 3078 Emergency stop contactor missing. Location: 41468 Neuss immediately available

Condition: good (used), Year of construction: 2001, Contactor, semiconductor contactor, contactor, power contactor, capacitor contactor, motor contactor -Manufacturer: Albright/Elektron, relay contactor -Type: SW201-3 Ledoy At Ruepfx Akusrl -Voltage: 48 V -Number: 5x contactors available -Price: per piece -Dimensions: 155/75/H80 mm -Weight: 1.5 kg/pc.

Condition: good (used), Year of construction: 2001, Contactor, semiconductor contactor, contactor, power contactor, capacitor contactor, motor contactor -Manufacturer: Albright, relay contactor -Type: SW180B-3 -Voltage: 24 V -Number: 9x contactors available -Price: per piece Ledpfxoy Aty Ae Akuerl -Dimensions: 122/60/H45 mm -Weight: 0.7 kg/pc.

Condition: ready for operation (used), Year of construction: 2021, operating hours: 5,797 h, clamping force: 800 kN, screw diameter: 40 mm, total width: 2,042 mm, total height: 1,711 mm, overall weight: 8,200 kg, product length (max.): 4,545 mm, This Netstal Elion 800-270 was manufactured in 2021. It features a robust AXOS control system and a high-speed injection unit capable of 450 mm/s. The machine includes a screw diameter of 40 mm and a fully integrated 9 kW hydraulic unit. It supports a tool installation height range of 200–500 mm and is equipped with a Euromap 67 robot interface. If you are looking to get high-quality injection molding capabilities, consider the Netstal Elion 800-270 machine we have for sale. Contact us for more information. Additional information inclusive Wittmann Primus 16T robotTravel ranges: Z: 1250 mm, Y: 800 mm, X: 590 mm5 kg payloadControl system: Wittmann CNC8, Primus R8.3 softwareR8 Teachbox TouchVacuum circuit with additional 5/2-way valve • Injection Unit: 270 Powermaster with injection speed of up to 450 mm/s • Screw Diameter: 40 mm, type B, 3-zone screw • Nozzle Type: Pneumatically controlled needle valve nozzle with additional heating zone • Minimum Installation Height: 200 mm • Maximum Installation Height: 500 mm • Clamping Force: 800 kN • Minimum Installation Height: 200 mm • Maximum Installation Height: 500 mm • Hydraulic Unit: Fully integrated hydraulic unit 9 kW with 140 bar operating pressure • Pneumatics: 1 Air valve to 890 Liter, 1 additional Air valve to 890 Liter • Safety Cover Execution: Locked doors, top Ledox D Rlpopfx Akuerl • Operator Identification: User recognition via PIN • EUROMAP 67: Standard + dynamic retractionInterfaces: Colour feeder, Freely Configurable DIO: 4x Output/2x Input • Tool Monitoring: Available on DFP • Voltage Fluctuation Compensation: UPS presentExtrasSocket box 1:X2510, Cekon, 16A /400V, 3P-N-PE via HSX2511, Cekon, 16A /400V, 3P-N-PE via HSX2512, Cekon, 16A /400V, 3P-N-PE via HSX2513, Cekon, 16A /400V, 3P-N-PE via socket contactor(Function 0060)Sockets for colour dispenser:1X2507 / 1W7145, Schuko 10A / 230V, 1P-N-PE, via HSplus 1X9507 / 1W9507, Schuko 10A / 230V, 1P-N-PE, via HSMount sockets and base housings on bracket 110.180.6902(Function 0060)1X3123, Zone 12 HAN 4A screw-in, power only1X9123, Zone 12 HAN 4A screw-in, sensor only(Function 0110)Pneumatics 1, 1x3/2WV 890L, mounted on DAP, W2008(Function 0470)Pneumatics 9, 1x3/2WV 890L, mounted on BAP, W2016(Function 0470)Cooling water 1:X4051 W9088 Flow measurement B1135 - B1138 (return),Pressure measurement B1211 (flow)X4060 W9260 HAN16E Temperature measurementB0801 (flow), B0832 (return)(Function 0490)Cooling water 2:X4050 W9086 Flow measurement B1147 - B1150 (return),Pressure measurement B1212 (flow)X4059 W9259 HAN16E Temperature measurementB08813 (Flow), B0814 (Return)(Function 0490)Dosing 1C:1x suction conveyor and 1x paint dosing1X2018/1W7146, HAN 4A for paint dosing1X9191/1W9946, HAN 3A for suction conveyormount sockets and base housings on holder 110.180.6902(Function 0550)