Used Tos Fgsv 32 for sale (8,331)

Condition: good (used), Year of construction: 2004, Ref. -No.: 10520 Manufacturer: TOS VARNSDORF Type: WHNQ 13 CNC Year of construction: 2004 Type of control: CNC-Steuerung Control: HEIDENHAIN TNC 430 Storage location: Halberstadt Country of origin: Czech Republic Machine-No.: 23XX X-Travel: 3500 mm Y-Travel: 2500 mm Z-Travel: 1250 mm W-Axis: 800 mm Table Load: 12.500 kg Clamping Area: 1800 x 2500 mm Tool Taper: SK 50 Tool Piece Magazine With: 60 Pcs./pcs. Spindle Speed: 3.000 RPM Max. Torque: 3323 Nm Kdedpfx Afew Nmw Hsvjl Rapid Travel X/Y/Z: 10000 mm / min Drive Capacity - Spindle Motor: 37 / 1500 kW Weight Of The Machine Ca.: 40 t Further information: - Tools + accessories - Angle head - Angle up to 2.5m - Chip conveyor - 3D measuring probe - Clamping device Machine is still in production and can be inspected under power by arrangement.

Condition: good (used), Year of construction: 2013, Ref. -No.: 10484 Manufacturer: TOS VARNSDORF Kdsdsw Iu Nhjpfx Afvel Type: WHN 13 CNC Year of construction: 2013 Type of control: CNC-Steuerung Control: HEIDENHAIN 530 Storage location: Halberstadt Country of origin: Czech Republic X-Travel: 3500 mm Y-Travel: 2000 mm Z-Travel: 1250 mm W-Axis: 800 mm B-Axis: 360 ° Table Load: 15.000 kg Tool Taper: SK 50 Turning Speeds: 1.400 RPM Spindle Speed: 2000 RPM Further information: The control system was converted to a HEIDENHAIN 530i in 2013. All drives were upgraded to digital. The thrust bearing tower was also replaced in 2013. Accessories: 3D probe - Heidenhain, large spindle support Additional table dimensions: 3850 x 900mm 1x axis module Heidenhain (overhauled), 1 new axis module is installed in the machine. Newly packed spare parts, covers from the machine. All bearings have been replaced by the machine in recent years. Tools and milling cutter heads are available. Machine is from 1st hand. The machine is still under power and in production. The machine can be viewed by appointment.

Condition: good (used), Machine in good working condition, 3-jaw chuck, including tool holders. Clamping plate 800 mm Max. working diameter mm 1100 Max. working height mm 795 Max. working weight kg 4000 Z axe mm 750 Kdjdpfxjy Hq Npe Afvol Spindle revolutions 500 rpm Machine dimensions mm 5630 x 4265 x 4530 Machine weight kg 13500

Condition: good (used), Year of construction: 1999, Ref. -No.: 10638 Manufacturer: TOS HULIN Type: SKA 12 CNC Year of construction: 1999 Type of control: CNC Control: Sinumerik 840 C Storage location: Halberstadt Country of origin: Czech Republic Turning Diameter: 1450 mm Turning Height: 1450 mm Tool Taper: SK50 Power Capacity: 60 kW Planar disk: 630 RPM Planar disk: Ø 1250 mm Ksdpfxoy Ed Sus Afvjdl Head Magazine: 30 academic subject Plate magazine: 24 academic subject Further information: - Hydraulically operated power chuck - Drive for rotary tools - Third controlled C-axis - Heidenhain linear scales in X and Z - Chip conveyor and extraction system - Renishaw for tool control The machine can be viewed under power by arrangement.

Year of construction: 2013, condition: ready for operation (used), travel distance X-axis: 5,000 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 2,200 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC530, spindle speed (max.): 3,000 rpm, table load: 16,000 kg, number of axes: 5, This 5-axis TOS WHQ 13 CNC boring machine was manufactured in 2013. It features a working spindle diameter of 130 mm, a transverse table travel of 5000 mm, and a table load capacity of 16,000 kg. The machine is equipped with a HEIDENHAIN iTNC530 control system and includes an automatic tool change system. If you are looking to get high-quality boring capabilities, consider the TOS WHQ 13 CNC machine we have for sale. Contact us for further details. • Working spindle diameter: 130 mm • Clamping: ISO 50 • Spindle extension (W): 800 mm • Table clamping surface: 2500 x 3000 mm • Control: HEIDENHAIN iTNC530 + handwheel • Motors and drives: SIEMENS • Scope of repair 2026: • Cleaning the machine • Checking and adjusting machine geometry • Checking machine functionality • Revision of electrical equipment • Revision of hydraulics and lubrication • Adjustment of clearances and optimization of drives • Replacement of guide surface wipers • Repair of telescopic machine cover • Replacement of balancing ropes • Repair of the platform • Revision of CHOV-K 20 bar cooling • Revision of automatic tool changer AVN60 • Machine with guarantee – please contact us for more information Additional equipment • CNC table – fully controlled B axis • CHOV-K 20 bar spindle axis cooling (emulsion / through-spindle coolant) • AVN60 automatic tool changer • CE platform and fence (guarding) Kjdsy D R D Ispfx Afvsdl • Chip conveyor

Year of construction: 2007, condition: ready for operation (used), travel distance X-axis: 3,500 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,220 mm, number of axes: 5, This 5-axis TOS Varnsdorf WHN130 was manufactured in 2007. It features a horizontal boring and milling machine with a table size of 1600 × 1800 mm and a spindle diameter of 130 mm. The machine includes a rotary table and is controlled by an NCT-104 system. Consider the opportunity to buy this TOS Varnsdorf WHN130 boring machine. Contact us for more information. • Control system: NCT-104 Spindle • Spindle diameter: 130 mm • Taper: ISO 50 (7:24) • Spindle speed range: 10 – 1500 rpm • Max spindle torque: approx. 2350 Nm • Main motor power: 37 kW Axis Travels • X-axis travel: 3500 mm • Y-axis travel: 2000 mm • Z-axis travel: 1220 mm • W-axis (spindle quill travel): 570 mm Table Kdodpfx Afox Imtajvel • Rotary table size: 1600 x 1800 mm • Max workpiece weight: 12,000 kg • T-slots: 22 x 9 x 160 mm • B-axis table feed: 0.03 – 1.5 rpm Feed Rates • Rapid traverse (X / Y / Z / W): 2000 mm/min Power • Total power requirement: approx. 80 – 83 kVA

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 0000025, center height: 315,425 mm, workpiece weight (max.): 3,000 kg, grinding length: 3,000 mm, grinding wheel diameter: 750 mm, total width: 2,700 mm, total length: 11,000 mm, total height: 2,200 mm, grinding diameter: 630,850 mm, workpiece weight between centers: 3,000 g, distance between centers: 3,000 mm, grinding wheel width: 100 mm, feed length Z-axis: 3,300 mm, grinding spindle speed: 1,000 rpm, overall weight: 17,000 kg, rotational speed (min.): 2 rpm, rotational speed (max.): 250 rpm, warranty duration: 24 months, rapid traverse X-axis: 3 m/min, rapid traverse Z-axis: 6 m/min, input voltage: 400 V, workpiece spindle speed (max.): 250 rpm, Equipment: rotational speed infinitely variable, Cylindrical grinding machine BUC63/3000 CNC new in 100% condition with Sinumerik ONE control system, or INTRONIX TOS CNC. Ksdju U Ewgepfx Afvodl It is possible to expand with additional equipment for superfinishing SUPFINA, or for grooving equipment for rubber or plastic rollers.

Condition: used, mileage: 183,811 km, power: 235 kW (319.51 HP), first registration: 06/2019, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro6, loading space volume: 44 m³, loading space length: 7,400 mm, loading space width: 2,480 mm, loading space height: 2,410 mm, Year of construction: 2019, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, tail-lift, ANTOS 2532 L Beverage Box Body 7.20 m with BÄR BC-S4 3,000 kg Tail Lift * Body: ORTEN SWING WALL Superstructure * 4-row rear load securing system LASI VDI 2700 * Trailer axle 7.5 t, steered and liftable * Vehicle number for customer inquiries: 4543 * Engine version Euro VI, with OBD-C * Tag axle, 7.5 t, steered, liftable * Active Brake Assist * Rear axle differential lock * Air conditioning * Radio/navigation system Bluetooth, comfort * Lane departure warning system * Tail lift * Trailer hitch standard, D40, Ringfeder * Attention Assist * High performance engine brake * Rear axle air suspension, low frame * Air deflector, lockable * Wheel configuration 6x2 * Stability control system (ESP) * Front axle air suspension * Trailer brake connection rear, Duo-Matic + standard * Trailer brake, 2-line, brake connections left * Trailer socket 12 V, 13-pin, fixed to chassis, LED * Trailer socket 24 V, 15-pin * Antos * Electronic brake system with ABS and ASR * Driver comfort air-suspension seat * Transmission G 211-12/14.93-1.0 * Central locking system comfort * Mercedes PowerShift 3 * External sun visor, transparent * Digital tachograph, EC, rev counter * Cruise control * High storage compartment on engine tunnel * AdBlue tank 60 l, left * Hill start assist, speed limit 30 km/h * Roof hatch/roof vent * Weight variant 26.0 t (7.5/11.5/7.5) * Heating, electronic compressed air supply unit * Engine OM936, R6, 7.7 l, 235 kW (320 hp), 1300 Nm * Wheelbase 4600 mm * Tubeless tyres, 315/70 R 22.5 rear axle * Tubeless tyres, 315/70 R 22.5 front axles/tag axle * S-cab ClassicSpace, 2.30 m, 320 mm engine tunnel * Sunblind, side, driver side * Tank 290 l, left, 650 x 565 x 950 mm, aluminium * Pre-installed for toll registration * Emissions sticker (green) * Two-seater * Full service history * 2/3 doors No liability for typesetting and typographical errors Sale only to commercial customers Errors and prior sale excepted. Changes, interim sale and errors reserved. The description serves to identify the vehicle and does not constitute a guarantee in the legal sense of purchase law. The description in the purchase contract is decisive. * TOP SERVICE + QUALITY * We are happy to provide you with a LEASING-FINANCE-HIRE PURCHASE offer Guarantee insurance available on request from the insurer * TÜV / UVV LBW / tachograph inspection and installation of OBU unit by our local partners * Export plates for 30 days All export documents are available upon request, but must be requested individually Kjdpfx Aox Im Uksfvsdl * TOLL for Toll-Collect can be booked in-house * Free transfer from Stuttgart Airport or Metzingen (Württ) train station * ARRIVAL TRAIN STATION: 72555 METZINGEN/WÜRTT. * FOR ENGLISH * Andreas Pittas * Thomas Pittas * Alexander Pittas * Robin Pittas WHATSAPP Number * * ---- Visit us on our website at * Over 200 vehicles in stock at all times

Condition: used, mileage: 27,293 km, power: 191 kW (259.69 HP), first registration: 01/1998, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: red, gearing type: mechanical, total width: 2,500 mm, total height: 3,500 mm, Year of construction: 1998, Equipment: ABS, compressor, MAN LE 18.264 Silent with telescopic articulated mast aerial appliance / aerial work platform Ziegler Bronto Skylift F32 MDT 2000 - immediately operational condition with valid 10-year inspection until 2027 ---- Equipment basic vehicle: * Suspension type leaf/leaf * Wheelbase 4325 mm * Permissible total weight 18 t * Gearbox EATON * Fuel tank 170l right * Adjustable steering wheel * Axle ratio i = 4.11 * Differential lock on rear axle * Medium-length cab * Driver's comfort seat with lumbar support - make GRAMMER * Passenger seat make GRAMMER * Exhaust tailpipe for fire department * Engine brake * Anti-lock braking system (ABS) * Traction control system * Disc brakes for front axle * Armrests on both doors * Additional high beam and fog lights * Hour meter * Headrests for driver and passenger Kjdstqz E Djpfx Afvedl * Cab rear wall with 2 narrow windows, left and right + wide window in the center * Heated rearview mirrors * Wide-angle mirror right * Kerb mirror right * Rotating blue lights Equipment telescopic articulated mast aerial appliance / aerial work platform: * Body: Ziegler Bronto Skylift F32 MDT 2000 with rescue basket (max. working height 32m) Max. outreach angle: 75 degrees, basket load: 270 kg, nominal rescue height: 25m, nominal outreach: 12m, outrigger: horizontal-vertical * Maximum horizontal reach 17m * Operation possible in underfloor area * Suspension device for pulley under basket * Crane eye on main boom with 2000KG payload * Horizontal-vertical outrigger * Maximum total outrigger width 6.10 m * Access ladder * Fixed extinguishing water pipe * Power supply in the basket 400 V / 230 V * Surrounding area lighting * Firefighting water inlet 2x B Storz * Rotatable basket 45 degrees left/right * Foldable rescue platform on the basket with handrail 1.7m x 0.5m * Water monitor at the basket control station with 2300 liters per minute * Stretcher holder * 3 entrances in the basket * 4 equipment compartments in the platform * 10-year inspection performed 07/2017, valid until 07/2027 * Complete service booklet available, all maintenance carried out annually ----Immediately operational non-smoking vehicle in well-maintained condition! Complete documentation and service history available Your contact for this vehicle: ---- Daniel Seidler Phone: Mobile: also Whatsapp Email: Subject to changes, prior sale, and errors!

Condition: used, mileage: 27,293 km, power: 191 kW (259.69 HP), first registration: 01/1998, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: red, gearing type: mechanical, total width: 2,500 mm, total height: 3,500 mm, Year of construction: 1998, Equipment: ABS, compressor, MAN LE 18.264 Silent with telescopic articulated mast aerial appliance / aerial work platform Ziegler Bronto Skylift F32 MDT 2000 - immediately operational condition with valid 10-year inspection until 2027 ---- Equipment basic vehicle: * Suspension type leaf/leaf * Wheelbase 4325 mm * Permissible total weight 18 t * Gearbox EATON * Fuel tank 170l right * Adjustable steering wheel * Axle ratio i = 4.11 * Differential lock on rear axle * Medium-length cab * Driver's comfort seat with lumbar support - make GRAMMER * Passenger seat make GRAMMER * Exhaust tailpipe for fire department * Engine brake * Anti-lock braking system (ABS) * Traction control system * Disc brakes for front axle * Armrests on both doors * Additional high beam and fog lights * Hour meter * Headrests for driver and passenger * Cab rear wall with 2 narrow windows, left and right + wide window in the center * Heated rearview mirrors * Wide-angle mirror right * Kerb mirror right * Rotating blue lights Kedpfstqzbgox Afvjdl Equipment telescopic articulated mast aerial appliance / aerial work platform: * Body: Ziegler Bronto Skylift F32 MDT 2000 with rescue basket (max. working height 32m) Max. outreach angle: 75 degrees, basket load: 270 kg, nominal rescue height: 25m, nominal outreach: 12m, outrigger: horizontal-vertical * Maximum horizontal reach 17m * Operation possible in underfloor area * Suspension device for pulley under basket * Crane eye on main boom with 2000KG payload * Horizontal-vertical outrigger * Maximum total outrigger width 6.10 m * Access ladder * Fixed extinguishing water pipe * Power supply in the basket 400 V / 230 V * Surrounding area lighting * Firefighting water inlet 2x B Storz * Rotatable basket 45 degrees left/right * Foldable rescue platform on the basket with handrail 1.7m x 0.5m * Water monitor at the basket control station with 2300 liters per minute * Stretcher holder * 3 entrances in the basket * 4 equipment compartments in the platform * 10-year inspection performed 07/2017, valid until 07/2027 * Complete service booklet available, all maintenance carried out annually ----Immediately operational non-smoking vehicle in well-maintained condition! Complete documentation and service history available Your contact for this vehicle: ---- Daniel Seidler Phone: Mobile: also Whatsapp Email: Subject to changes, prior sale, and errors!

Condition: new, Year of construction: 2026, machine/vehicle number: EAN0729389556525, total length: 71,000 mm, total height: 4,000 mm, clearance between the columns: 2,700 mm, shelf height: 4,000 mm, number of shelf rows: 7, load capacity: 6,000 kg, frame height: 4,000 mm, load per truss pair (max.): 3,000 kg, Pallet Racking System 4 m high, each bay with 2 beam levels (clear width 2700 mm) Scope of supply: 32 frames, 4 m high 128 floor anchors Kdjdoy E Nn Uopfx Afvol 18 corner impact protectors 100 beams, 2.7 m long, 0.11 m high 150 mesh decks 89/110, load capacity 1000 kg 7 load capacity signs Delivery: free to site Frames bolted, not pre-assembled Freight / Delivery: - Maximum 20 working days after receipt of payment - Free delivery to site / assembly location - Unloading from the truck is carried out by the customer using their own lifting equipment - Delivery to anywhere in Germany except islands! Deliveries to EU countries are subject to individual agreement.

Condition: excellent (used), TOS SN500 SA, 1500 mm, Digital, Tooling Kedpjy Auydsfx Afvjdl

Condition: excellent (used), Year of construction: 2001, x travel 1600 mm y travel 1000 mm z travel 780 mm - number of processing axes (excl parallel axes) 5 - X-axis travel 1600 mm - Y-axis travel 1000 mm - Z-axis travel 780 mm - table surface (left-right) 1000 mm - table surface (front-back) 1000 mm Kdodpfx Afsy Ez Elsvel - workpiece load (max) 6000 kg - - positioning/indexing 0.001 ° - - positioning/indexing 2.5 ° - - positioning/indexing 2.5 ° - spindle revolutions (max) 2500 /min - drive power 22 kW - number of positions 60 - number of store positions 2 - pallet length 1000 mm - pallet width 1000 mm - number of pallets 2 - space requirements -left/right- 6400 mm - space requirements -front/back- 6900 mm - total height 4000 mm - total weight approx. 26000 kg control HEIDENHAIN TNC 426 The machine is in very good condition and available immediately.

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, travel distance X-axis: 1,600 mm, travel distance Y-axis: 920 mm, travel distance Z-axis: 950 mm, spindle diameter: 128 mm, controller model: HEIDENHAIN iTNC530, The machine was overhauled and modernized in 2005. Repairs were carried out in 2025. The following work was performed: - Cleaning of the machine - Overhaul and adjustment of machine geometry - Overhaul of machine functionality - Overhaul of electrical equipment - Overhaul of hydraulics and lubrication - Backlash compensation and drive optimization - Replacement of guideway wipers - Repair of the telescopic cover - Overhaul of the CHOV-K 10 bar tool cooling system - Overhaul of the AVN40 tool changer TECHNICAL DETAILS Main spindle diameter: 128.57 mm Tool holder: ISO 50 Spindle speed range: 5,000 rpm Travel X-axis: 1,600 mm Travel Y-axis: 920 mm Travel Z-axis: 950 mm Clamping surface of table: 850 x 850 mm (850 x 1,600 mm including additional supports) Table load capacity: 3,000 kg MACHINE DETAILS Control: HEIDENHAIN iTNC530 EQUIPMENT Kdsdpfey Edl Ujx Afvel - Handwheel - SIEMENS motors and drives - CNC table - full B-axis control - CHOV-K 10 bar - through-spindle cooling – emulsion - ATC40 - automatic tool changer - Operator console protected against chips and coolant - Workpiece cover

Condition: used, mileage: 158,894 km, power: 235 kW (319.51 HP), first registration: 06/2015, fuel type: diesel, empty load weight: 16,960 kg, maximum load weight: 9,040 kg, overall weight: 26,000 kg, tire size: 315/80 22,5, tire condition: 30 %, axle configuration: 6x2, wheelbase: 4,300 mm, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2015, operating hours: 158,894 h, front tire size: 315/80 22,5, rear tire size: 315/80 22,5, Equipment: ABS, air conditioning, cruise control, differential lock, truck registration, Reference number for inquiries: 69738 Mercedes-Benz 2532 * Year of manufacture: 2015 * ABS (Anti-lock Braking System) Kdsdewwqm Nopfx Afvsl * EBS (Electronic Braking System) * Electric window lifters * Air conditioning * Air suspension * Lift axle * Cruise control * PTO (Power Take-Off) * Differential lock * Low noise emission * Local/urban distribution > 7.5 t * Trailing steering axle * Electric windows and mirrors * Remote central locking * Lane departure warning system * Transmission: Automatic * Suspension: Leaf/Air * Gross weight: 26,000 kg * Unladen weight: 16,960 kg * Payload: 9,040 kg * Permissible total weight: 26,000 kg * Tire condition, 1st axle: 30% -- 60% - Tire size: 315/80 R22.5 * Tire condition, 2nd axle: 30%|30% -- 30%|30% - Tire size: 315/80 R22.5 * Tire condition, 3rd axle: 30% -- 30% - Tire size: 315/80 R22.5 * Wheelbase: 4,300 mm * Tire sizes: 315/80 R22.5 * Superstructure: Faun Powerpress II 524 * Zöller Delta 2301 bin lift * 3 seats * Central lubrication system * On request, we are happy to send you a video or additional photos Disclaimer: Subject to change, prior sale, and errors excepted. More images and videos can be found on our website. Our comprehensive services include for example: * Purchase / sale / rental of commercial vehicles * Fast, straightforward financing * Handling of all (export) documentation * Order of export / customs license plates * Vehicle preparation: New tarpaulins, lettering, painting, etc. * Professional loading / load securing * TÜV-inspection, registration service * Transfer/delivery of commercial vehicles Contact our experienced staff – we will be pleased to advise you.

Condition: ready for operation (used), Year of construction: 1983, operating hours: 8,529 h, functionality: fully functional, travel distance X-axis: 1,200 mm, travel distance Y-axis: 1,120 mm, travel distance Z-axis: 950 mm, table load: 3,000 kg, spindle diameter: 100 mm, The machine was modernised and overhauled in 2002! TECHNICAL DETAILS Working spindle diameter: 100 mm Spindle speed range: 1,800 rpm Taper: ISO 50 Spindle travel (W): 630 mm Travel X-axis: 1,200 mm Kdedey Edgfspfx Afvel Travel Y-axis: 1,120 mm Travel Z-axis: 950 mm Table clamping surface: 1,000 mm x 1,120 mm Table load capacity: 3,000 kg MACHINE DETAILS Control system: HEIDENHAIN TNC426 Motors and drives: SIEMENS Operating hours (as displayed): Control system on-time: 37,038 h Machine operating time: 30,987 h Program run time: 8,529 h Spindle run time: 12,156 h EQUIPMENT Handwheel: HR410

Condition: used, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,400 mm, travel distance Z-axis: 1,250 mm, spindle diameter: 110 mm, X-AXIS TRAVEL 2000 MM Y-STROKE VERTICAL 1400 MM Z-AXIS TRAVEL COLUMN: 1250 MM Kjdex Da Slspfx Afvodl W-AXIS SPINDLE TRAVEL 710 MM TABLE 1400 X 1600 MM WORKPIECE LOAD 8000 KG SPINDLE SPEED 10 - 2000 RPM ISO 50 RAPID FEED X Y Z 10000 MM/MIN CNC HEIDENHAIN TNC 426 ATC 60 PLACES

Condition: good (used), Heidelberg GT 32×46 Hot Stamping Machine Reviewed and ready for production. The machine is ready for hot stamping and die cutting. Machine format: 32x46cm Press force: 60t Weight: 600gsm Operating speed: 4000 sheets/h This model is designed for hot stamping and features a large heating plate. Weight: 2300kg Holder manufactured by Hakro. Includes frame, fillers, and letterpress locks. Kdodpsy E Exvefx Afvol

Condition: excellent (used), CATALOG NUMBER 6913 TECHNICAL DATA - track width: 360 mm - shaft width: 350 mm - max. saw blade diameter: 350 mm - blade hole diameter: 80 mm - max. cutting height: 120 mm from above: - pawls - toothed feed shaft - pawls - smooth sliding shaft - shaft with saw blades - pressure sliding shaft from below: - 2 sliding rollers in front of the table - guide - pawls - track - central track lubrication - electric lifting of the saw blade shaft - electric body lifting - stepless feed speed control - feed motor approx. 2.5 kW - main motor 30 kW - overall dimensions L/W/H 2500x2300x1900 mm Kdsdsyz Ncwepfx Afvel - weight approx. 4000 kg ADVANTAGES – Czech manufacture – 2 sliding rollers in the table – used multi-blade saw – very good condition Net price: 31,900 PLN Net price: 7,600 EUR Net price calculated at exchange rate 4.2 PLN/EUR (in case of significant exchange rate changes, the price may be adjusted)

Condition: excellent (used), CATALOG NUMBER: 7480 Technical data: - Track width: 360mm - Shaft width: 350mm - Max. blade diameter: 350mm - Blade bore diameter: 80mm - Max. cutting height: 120mm - Table size: 2040x1220mm Kedpfxsyg Ip Ej Afvodl From above: - Pawls - Driving/sprocket shaft - Pawls - Shaft with saw blades - Sliding, pressure shaft From below: - Rollers in front of the table, 2 pcs - Guide - Pawls - Track - Central track lubrication - Electric height adjustment of saw blade shaft - Electric height adjustment of the body - Stepless feed speed control - Extraction outlet diameter: 140mm, 160mm - Main motor: 30kW - Overall dimensions (L/W/H): 2600x2300x1850mm - Weight: approx. 4000kg ADVANTAGES – Czech production – Used multirip saw – Very good condition Net price: 30,900 PLN Net price: 7,360 EUR (depending on EUR exchange rate of 4.2) (Prices may change with large fluctuations)

Condition: excellent (used), Catalogue number 7804 TECHNICAL DATA - Track width: 350mm - Shaft width: 330mm - Mounted blade: 300mm - Max blade diameter: 400mm - Blade bore diameter: 70mm - Max cutting height with 400mm blade: 150mm - Table dimensions: 2240x770mm – From above: - kickback/retractors - slip roller - retractors - smooth slip roller - shaft with saw blades - 2 slip and pressure shafts – From below: Ksdpfoyz I Hnsx Afvodl - roller in front of the table - guide - pawls - track - central track lubrication - electric raising of saw blade shaft 0.75kW - electric raising of machine body 0.75kW - variable feed speed adjustment - Extraction nozzle diameter: 320mm - Main motor: 45kW - Overall dimensions (L/W/H): 2280x1820x2040mm - Weight: 2850kg ADVANTAGES – Czech production – Used multi saw machine – Technical documentation (DTR) – Very good condition Net price: 62,900 PLN Net price: 14,970 EUR depending on EUR rate 4.2 (Prices may change with significant fluctuations)

Condition: excellent (used), Catalogue number: 7889 TECHNICAL DATA track width: 230mm shaft width: 230mm max blade diameter: 350mm / 400mm blade bore diameter: 80mm max cutting height with 350 / 400 blade: 115mm / 150mm table width (with clearance): 1200mm Kjdpfx Aeyh Np Hefvjdl table length: 1900mm – from above: lock/blockers drive shaft, toothed shaft with saw blades 2 sliding/pressure rollers – from below: guide lock/blockers track 2 sliding rollers in the table feed speed adjustable manually feed motor approx. 2.2kW main motor: 30kW extraction nozzle diameter: 200mm overall dimensions (L/W/H): 2700x1800x2000mm weight approx.: 3000kg ADVANTAGES – Czech production – used multisaw – DTR technical documentation – very good condition Net price: 22,900 PLN Net price: 5,450 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (in case of significant exchange rate fluctuations, the price may change)

Condition: ready for operation (used), Year of construction: 1988, travel distance X-axis: 1,400 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 500 mm, total height: 2,500 mm, total width: 3,350 mm, total length: 3,060 mm, table width: 630 mm, table length: 1,800 mm, overall weight: 6,500 kg, Manufacturer: TOS Kuřim Total power requirement: 23 kVA Spindle: Kdsdpfoy E Igiox Afvel Taper bore in spindle: ISO 50 Number of speeds / speed range: 18 / 35.5 – 1800 rpm Spindle drive motor power: 15 kW Max. spindle torque: 2500 Nm Feed range X–Y / Z: Number of steps / range: 16 / 10 – 1800 / 2.5 – 450 mm/min Rapid traverse: 4000 / 1000 mm/min

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, Clamping table area mm 250 x 1130 Working stroke: Kdjdey Enumopfx Afvsl longitudinal mm 800 cross mm 350 vertical mm 450 Taper in spindle ISO 40 Range of revolutions r.p.m. 45 - 4500 Number of revolutions steps 16 Main motor output kW 2,2/3,0 Total machine input kVA 4,0 Machine dimensions mm 2650 x 1980 x 2260 Machine weight kg 1760

Condition: used, Year of construction: 2009, greates pass round over bed 1050 mm dist. between centers 6000 mm centre height 520 mm turning length 4810 mm workpiece weight max. (main spindle) 6000 kg Maximum workpiece weight with steady rests 8000 kg max. torque on the spindle 12500 Nm number of spindle speeds 2,8-560 1/min feed per revolution 0,08-56 mm chuck diameter 630 mm Maximum travel distance of the longitudinal slide 4810 mm Maximum travel distance of the cross slide (suppor 530 mm Maximum travel distance of the tool slide (support 340 mm Tailstock quill diameter 150 mm total power requirement 31 kVA weight of the machine ca. 10500 kg dimensions of the machine ca. 7860 x 1970 x 1480 mm Kdodpfx Aeygxy Uofvjl Equipment/accessories: -2 x face plates -3 jaw chucks -2 x steady rests -Multifix holder -Turning tools -Various tips -Technical documentation